Merge branch 'bcm7xxx-cleanups'
Florian Fainelli says:
====================
net: phy: bcm7xxx: Misc cleanups
These two patches are cleanups to the BCM7xxx internal PHY driver:
- fix a constant name missing a X (as in BCM7XXX)
- add a macro to reduce the amount of code duplication to add new entries
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index bf241a3..9b31104 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -24,7 +24,7 @@
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13
#define MII_BCM7XXX_100TX_DISC 0x14
#define MII_BCM7XXX_AUX_MODE 0x1d
-#define MII_BCM7XX_64CLK_MDIO BIT(12)
+#define MII_BCM7XXX_64CLK_MDIO BIT(12)
#define MII_BCM7XXX_TEST 0x1f
#define MII_BCM7XXX_SHD_MODE_2 BIT(2)
@@ -247,7 +247,7 @@
int ret;
/* Enable 64 clock MDIO */
- phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO);
+ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO);
phy_read(phydev, MII_BCM7XXX_AUX_MODE);
/* Workaround only required for 100Mbits/sec capable PHYs */
@@ -326,6 +326,21 @@
.resume = bcm7xxx_28nm_resume, \
}
+#define BCM7XXX_40NM_EPHY(_oui, _name) \
+{ \
+ .phy_id = (_oui), \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_BASIC_FEATURES | \
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
+ .flags = PHY_IS_INTERNAL, \
+ .config_init = bcm7xxx_config_init, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ .suspend = bcm7xxx_suspend, \
+ .resume = bcm7xxx_config_init, \
+}
+
static struct phy_driver bcm7xxx_driver[] = {
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
@@ -333,43 +348,10 @@
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),
+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"),
+ BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"),
{
- .phy_id = PHY_ID_BCM7425,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7425",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_config_init,
-}, {
- .phy_id = PHY_ID_BCM7429,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7429",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_config_init,
-}, {
- .phy_id = PHY_ID_BCM7435,
- .phy_id_mask = 0xfffffff0,
- .name = "Broadcom BCM7435",
- .features = PHY_GBIT_FEATURES |
- SUPPORTED_Pause | SUPPORTED_Asym_Pause,
- .flags = PHY_IS_INTERNAL,
- .config_init = bcm7xxx_config_init,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
- .suspend = bcm7xxx_suspend,
- .resume = bcm7xxx_config_init,
-}, {
.phy_id = PHY_BCM_OUI_4,
.phy_id_mask = 0xffff0000,
.name = "Broadcom BCM7XXX 40nm",