powerpc: Merge enough to start building in arch/powerpc.
This creates the directory structure under arch/powerpc and a bunch
of Kconfig files. It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.
For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes
to files in those directories and files outside arch/powerpc.
The boot directory is still not merged. That's going to be interesting.
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
new file mode 100644
index 0000000..edfac46
--- /dev/null
+++ b/arch/powerpc/Kconfig
@@ -0,0 +1,861 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/PowerPC Kernel Configuration"
+
+config PPC64
+ bool "64-bit kernel"
+ default n
+ help
+ This option selects whether a 32-bit or a 64-bit kernel
+ will be built.
+
+config PPC32
+ bool
+ default y if !PPC64
+
+config 64BIT
+ bool
+ default y if PPC64
+
+config PPC_MERGE
+ def_bool y
+
+config MMU
+ bool
+ default y
+
+config UID16
+ bool
+
+config GENERIC_HARDIRQS
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config PPC
+ bool
+ default y
+
+config EARLY_PRINTK
+ bool
+ default y if PPC64
+
+config COMPAT
+ bool
+ default y if PPC64
+
+config SYSVIPC_COMPAT
+ bool
+ depends on COMPAT && SYSVIPC
+ default y
+
+# All PPC32s use generic nvram driver through ppc_md
+config GENERIC_NVRAM
+ bool
+ default y if PPC32
+
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+ bool
+ default y
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ default y
+
+menu "Processor support"
+choice
+ prompt "Processor Type"
+ depends on PPC32
+ default 6xx
+
+config 6xx
+ bool "6xx/7xx/74xx"
+ select PPC_FPU
+ help
+ There are four families of PowerPC chips supported. The more common
+ types (601, 603, 604, 740, 750, 7400), the Motorola embedded
+ versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
+ embedded versions (403 and 405) and the high end 64 bit Power
+ processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
+
+ Unless you are building a kernel for one of the embedded processor
+ systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
+ Note that the kernel runs in 32-bit mode even on 64-bit chips.
+
+config PPC_52xx
+ bool "Freescale 52xx"
+
+config PPC_82xx
+ bool "Freescale 82xx"
+
+config PPC_83xx
+ bool "Freescale 83xx"
+
+config 40x
+ bool "AMCC 40x"
+
+config 44x
+ bool "AMCC 44x"
+
+config PPC64BRIDGE
+ select PPC_FPU
+ bool "POWER3, POWER4 and PPC970 (G5)"
+
+config 8xx
+ bool "Freescale 8xx"
+
+config E200
+ bool "Freescale e200"
+
+config E500
+ bool "Freescale e500"
+endchoice
+
+config POWER4_ONLY
+ bool "Optimize for POWER4"
+ depends on PPC64 || PPC64BRIDGE
+ default n
+ ---help---
+ Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
+ The resulting binary will not work on POWER3 or RS64 processors
+ when compiled with binutils 2.15 or later.
+
+config POWER3
+ bool
+ depends on PPC64 || PPC64BRIDGE
+ default y if !POWER4_ONLY
+
+config POWER4
+ depends on PPC64 || PPC64BRIDGE
+ def_bool y
+
+config PPC_FPU
+ bool
+ default y if PPC64
+
+config BOOKE
+ bool
+ depends on E200 || E500
+ default y
+
+config FSL_BOOKE
+ bool
+ depends on E200 || E500
+ default y
+
+config PTE_64BIT
+ bool
+ depends on 44x || E500
+ default y if 44x
+ default y if E500 && PHYS_64BIT
+
+config PHYS_64BIT
+ bool 'Large physical address support' if E500
+ depends on 44x || E500
+ default y if 44x
+ ---help---
+ This option enables kernel support for larger than 32-bit physical
+ addresses. This features is not be available on all e500 cores.
+
+ If in doubt, say N here.
+
+config ALTIVEC
+ bool "AltiVec Support"
+ depends on 6xx || POWER4
+ ---help---
+ This option enables kernel support for the Altivec extensions to the
+ PowerPC processor. The kernel currently supports saving and restoring
+ altivec registers, and turning on the 'altivec enable' bit so user
+ processes can execute altivec instructions.
+
+ This option is only usefully if you have a processor that supports
+ altivec (G4, otherwise known as 74xx series), but does not have
+ any affect on a non-altivec cpu (it does, however add code to the
+ kernel).
+
+ If in doubt, say Y here.
+
+config SPE
+ bool "SPE Support"
+ depends on E200 || E500
+ ---help---
+ This option enables kernel support for the Signal Processing
+ Extensions (SPE) to the PowerPC processor. The kernel currently
+ supports saving and restoring SPE registers, and turning on the
+ 'spe enable' bit so user processes can execute SPE instructions.
+
+ This option is only useful if you have a processor that supports
+ SPE (e500, otherwise known as 85xx series), but does not have any
+ effect on a non-spe cpu (it does, however add code to the kernel).
+
+ If in doubt, say Y here.
+
+config PPC_STD_MMU
+ bool
+ depends on 6xx || POWER3 || POWER4 || PPC64
+ default y
+
+config PPC_STD_MMU_32
+ def_bool y
+ depends on PPC_STD_MMU && PPC32
+
+config SMP
+ depends on PPC_STD_MMU
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, say N. If you have a system with more
+ than one CPU, say Y. Note that the kernel does not currently
+ support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
+ since they have inadequate hardware support for multiprocessor
+ operation.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on single-processor machines.
+ On a single-processor machine, the kernel will run faster if you say
+ N here.
+
+ If you don't know what to do here, say N.
+
+config NR_CPUS
+ int "Maximum number of CPUs (2-32)"
+ range 2 128
+ depends on SMP
+ default "32" if PPC64
+ default "4"
+
+config NOT_COHERENT_CACHE
+ bool
+ depends on 4xx || 8xx || E200
+ default y
+endmenu
+
+source "init/Kconfig"
+
+menu "Platform support"
+ depends on PPC64 || 6xx
+
+choice
+ prompt "Machine type"
+ default PPC_MULTIPLATFORM
+
+config PPC_MULTIPLATFORM
+ bool "Generic desktop/server/laptop"
+ help
+ Select this option if configuring for an IBM pSeries or
+ RS/6000 machine, an Apple machine, or a PReP, CHRP,
+ Maple or Cell-based machine.
+
+config PPC_ISERIES
+ bool "IBM Legacy iSeries"
+ depends on PPC64
+
+config EMBEDDED6xx
+ bool "Embedded 6xx/7xx/7xxx-based board"
+ depends on PPC32
+
+config APUS
+ bool "Amiga-APUS"
+ depends on PPC32 && BROKEN
+ help
+ Select APUS if configuring for a PowerUP Amiga.
+ More information is available at:
+ <http://linux-apus.sourceforge.net/>.
+endchoice
+
+config PPC_PSERIES
+ depends on PPC_MULTIPLATFORM && PPC64
+ bool " IBM pSeries & new (POWER5-based) iSeries"
+ default y
+
+config PPC_CHRP
+ bool " Common Hardware Reference Platform (CHRP) based machines"
+ depends on PPC_MULTIPLATFORM && PPC32
+ default y
+
+config PPC_PMAC
+ bool " Apple PowerMac based machines"
+ depends on PPC_MULTIPLATFORM
+ default y
+
+config PPC_PMAC64
+ bool
+ depends on PPC_PMAC && POWER4
+ default y
+
+config PPC_PREP
+ bool " PowerPC Reference Platform (PReP) based machines"
+ depends on PPC_MULTIPLATFORM && PPC32
+ default y
+
+config PPC_MAPLE
+ depends on PPC_MULTIPLATFORM && PPC64
+ bool " Maple 970FX Evaluation Board"
+ select U3_DART
+ select MPIC_BROKEN_U3
+ default n
+ help
+ This option enables support for the Maple 970FX Evaluation Board.
+ For more informations, refer to <http://www.970eval.com>
+
+config PPC_BPA
+ bool " Broadband Processor Architecture"
+ depends on PPC_MULTIPLATFORM && PPC64
+
+config PPC_OF
+ bool
+ depends on PPC_MULTIPLATFORM # for now
+ default y
+
+config XICS
+ depends on PPC_PSERIES
+ bool
+ default y
+
+config U3_DART
+ bool
+ depends on PPC_MULTIPLATFORM && PPC64
+ default n
+
+config MPIC
+ depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE
+ bool
+ default y
+
+config MPIC_BROKEN_U3
+ bool
+ depends on PPC_MAPLE
+ default y
+
+config BPA_IIC
+ depends on PPC_BPA
+ bool
+ default y
+
+config IBMVIO
+ depends on PPC_PSERIES || PPC_ISERIES
+ bool
+ default y
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_PMAC
+ bool "Support for Apple PowerBooks"
+ depends on CPU_FREQ && ADB_PMU && PPC32
+ select CPU_FREQ_TABLE
+ help
+ This adds support for frequency switching on Apple PowerBooks,
+ this currently includes some models of iBook & Titanium
+ PowerBook.
+
+config PPC601_SYNC_FIX
+ bool "Workarounds for PPC601 bugs"
+ depends on 6xx && (PPC_PREP || PPC_PMAC)
+ help
+ Some versions of the PPC601 (the first PowerPC chip) have bugs which
+ mean that extra synchronization instructions are required near
+ certain instructions, typically those that make major changes to the
+ CPU state. These extra instructions reduce performance slightly.
+ If you say N here, these extra instructions will not be included,
+ resulting in a kernel which will run faster but may not run at all
+ on some systems with the PPC601 chip.
+
+ If in doubt, say Y here.
+
+config TAU
+ bool "Thermal Management Support"
+ depends on 6xx
+ help
+ G3 and G4 processors have an on-chip temperature sensor called the
+ 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
+ temperature within 2-4 degrees Celsius. This option shows the current
+ on-die temperature in /proc/cpuinfo if the cpu supports it.
+
+ Unfortunately, on some chip revisions, this sensor is very inaccurate
+ and in some cases, does not work at all, so don't assume the cpu
+ temp is actually what /proc/cpuinfo says it is.
+
+config TAU_INT
+ bool "Interrupt driven TAU driver (DANGEROUS)"
+ depends on TAU
+ ---help---
+ The TAU supports an interrupt driven mode which causes an interrupt
+ whenever the temperature goes out of range. This is the fastest way
+ to get notified the temp has exceeded a range. With this option off,
+ a timer is used to re-check the temperature periodically.
+
+ However, on some cpus it appears that the TAU interrupt hardware
+ is buggy and can cause a situation which would lead unexplained hard
+ lockups.
+
+ Unless you are extending the TAU driver, or enjoy kernel/hardware
+ debugging, leave this option off.
+
+config TAU_AVERAGE
+ bool "Average high and low temp"
+ depends on TAU
+ ---help---
+ The TAU hardware can compare the temperature to an upper and lower
+ bound. The default behavior is to show both the upper and lower
+ bound in /proc/cpuinfo. If the range is large, the temperature is
+ either changing a lot, or the TAU hardware is broken (likely on some
+ G4's). If the range is small (around 4 degrees), the temperature is
+ relatively stable. If you say Y here, a single temperature value,
+ halfway between the upper and lower bounds, will be reported in
+ /proc/cpuinfo.
+
+ If in doubt, say N here.
+endmenu
+
+source arch/powerpc/platforms/embedded6xx/Kconfig
+source arch/powerpc/platforms/4xx/Kconfig
+source arch/powerpc/platforms/85xx/Kconfig
+source arch/powerpc/platforms/8xx/Kconfig
+
+menu "Kernel options"
+
+config HIGHMEM
+ bool "High memory support"
+ depends on PPC32
+
+source kernel/Kconfig.hz
+source kernel/Kconfig.preempt
+source "fs/Kconfig.binfmt"
+
+# We optimistically allocate largepages from the VM, so make the limit
+# large enough (16MB). This badly named config option is actually
+# max order + 1
+config FORCE_MAX_ZONEORDER
+ int
+ depends on PPC64
+ default "13"
+
+config MATH_EMULATION
+ bool "Math emulation"
+ depends on 4xx || 8xx || E200 || E500
+ ---help---
+ Some PowerPC chips designed for embedded applications do not have
+ a floating-point unit and therefore do not implement the
+ floating-point instructions in the PowerPC instruction set. If you
+ say Y here, the kernel will include code to emulate a floating-point
+ unit, which will allow programs that use floating-point
+ instructions to run.
+
+config IOMMU_VMERGE
+ bool "Enable IOMMU virtual merging (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PPC64
+ default n
+ help
+ Cause IO segments sent to a device for DMA to be merged virtually
+ by the IOMMU when they happen to have been allocated contiguously.
+ This doesn't add pressure to the IOMMU allocator. However, some
+ drivers don't support getting large merged segments coming back
+ from *_map_sg(). Say Y if you know the drivers you are using are
+ properly handling this case.
+
+config HOTPLUG_CPU
+ bool "Support for enabling/disabling CPUs"
+ depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
+ ---help---
+ Say Y here to be able to disable and re-enable individual
+ CPUs at runtime on SMP machines.
+
+ Say N if you are unsure.
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on PPC_MULTIPLATFORM && EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config EMBEDDEDBOOT
+ bool
+ depends on 8xx || 8260
+ default y
+
+config PC_KEYBOARD
+ bool "PC PS/2 style Keyboard"
+ depends on 4xx || CPM2
+
+config PPCBUG_NVRAM
+ bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
+ default y if PPC_PREP
+
+config IRQ_ALL_CPUS
+ bool "Distribute interrupts on all CPUs by default"
+ depends on SMP && !MV64360
+ help
+ This option gives the kernel permission to distribute IRQs across
+ multiple CPUs. Saying N here will route all IRQs to the first
+ CPU. Generally saying Y is safe, although some problems have been
+ reported with SMP Power Macintoshes with this option enabled.
+
+source "arch/powerpc/platforms/pseries/Kconfig"
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+ depends on PPC64
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+ depends on PPC64 && !NUMA
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ depends on SMP && PPC_PSERIES
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+ depends on PPC64
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on ARCH_DISCONTIGMEM_ENABLE
+
+source "mm/Kconfig"
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
+# Some NUMA nodes have memory ranges that span
+# other nodes. Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node.
+#
+# This is a relatively temporary hack that should
+# be able to go away when sparsemem is fully in
+# place
+
+config NODES_SPAN_OTHER_NODES
+ def_bool y
+ depends on NEED_MULTIPLE_NODES
+
+config NUMA
+ bool "NUMA support"
+ default y if DISCONTIGMEM || SPARSEMEM
+
+config SCHED_SMT
+ bool "SMT (Hyperthreading) scheduler support"
+ depends on PPC64 && SMP
+ default off
+ help
+ SMT scheduler support improves the CPU scheduler's decision making
+ when dealing with POWER5 cpus at a cost of slightly increased
+ overhead in some places. If unsure say N here.
+
+config PROC_DEVICETREE
+ bool "Support for Open Firmware device tree in /proc"
+ depends on PPC_OF && PROC_FS
+ help
+ This option adds a device-tree directory under /proc which contains
+ an image of the device tree that the kernel copies from Open
+ Firmware. If unsure, say Y here.
+
+source "arch/powerpc/platforms/prep/Kconfig"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+ depends on !PPC_ISERIES
+
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
+ help
+ On some platforms, there is currently no way for the boot loader to
+ pass arguments to the kernel. For these platforms, you can supply
+ some command-line options at build time by entering them here. In
+ most cases you will need to specify the root device here.
+
+if !44x || BROKEN
+source kernel/power/Kconfig
+endif
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
+endmenu
+
+config ISA_DMA_API
+ bool
+ default y
+
+menu "Bus options"
+
+config ISA
+ bool "Support for ISA-bus hardware"
+ depends on PPC_PREP || PPC_CHRP
+ help
+ Find out whether you have ISA slots on your motherboard. ISA is the
+ name of a bus system, i.e. the way the CPU talks to the other stuff
+ inside your box. If you have an Apple machine, say N here; if you
+ have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
+ you have an embedded board, consult your board documentation.
+
+config GENERIC_ISA_DMA
+ bool
+ depends on PPC64 || POWER4 || 6xx && !CPM2
+ default y
+
+config EISA
+ bool
+
+config SBUS
+ bool
+
+# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
+config MCA
+ bool
+
+config PCI
+ bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
+ default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
+ default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+ default PCI_QSPAN if !4xx && !CPM2 && 8xx
+ help
+ Find out whether your system includes a PCI bus. PCI is the name of
+ a bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. If you say Y here, the kernel will include drivers and
+ infrastructure code to support PCI bus devices.
+
+config PCI_DOMAINS
+ bool
+ default PCI
+
+config MPC83xx_PCI2
+ bool " Supprt for 2nd PCI host controller"
+ depends on PCI && MPC834x
+ default y if MPC834x_SYS
+
+config PCI_QSPAN
+ bool "QSpan PCI"
+ depends on !4xx && !CPM2 && 8xx
+ help
+ Say Y here if you have a system based on a Motorola 8xx-series
+ embedded processor with a QSPAN PCI interface, otherwise say N.
+
+config PCI_8260
+ bool
+ depends on PCI && 8260
+ default y
+
+config 8260_PCI9
+ bool " Enable workaround for MPC826x erratum PCI 9"
+ depends on PCI_8260 && !ADS8272
+ default y
+
+choice
+ prompt " IDMA channel for PCI 9 workaround"
+ depends on 8260_PCI9
+
+config 8260_PCI9_IDMA1
+ bool "IDMA1"
+
+config 8260_PCI9_IDMA2
+ bool "IDMA2"
+
+config 8260_PCI9_IDMA3
+ bool "IDMA3"
+
+config 8260_PCI9_IDMA4
+ bool "IDMA4"
+
+endchoice
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Advanced setup"
+ depends on PPC32
+
+config ADVANCED_OPTIONS
+ bool "Prompt for advanced kernel configuration options"
+ help
+ This option will enable prompting for a variety of advanced kernel
+ configuration options. These options can cause the kernel to not
+ work if they are set incorrectly, but can be used to optimize certain
+ aspects of kernel memory management.
+
+ Unless you know what you are doing, say N here.
+
+comment "Default settings for advanced configuration options are used"
+ depends on !ADVANCED_OPTIONS
+
+config HIGHMEM_START_BOOL
+ bool "Set high memory pool address"
+ depends on ADVANCED_OPTIONS && HIGHMEM
+ help
+ This option allows you to set the base address of the kernel virtual
+ area used to map high memory pages. This can be useful in
+ optimizing the layout of kernel virtual memory.
+
+ Say N here unless you know what you are doing.
+
+config HIGHMEM_START
+ hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
+ default "0xfe000000"
+
+config LOWMEM_SIZE_BOOL
+ bool "Set maximum low memory"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the maximum amount of memory which
+ will be used as "low memory", that is, memory which the kernel can
+ access directly, without having to set up a kernel virtual mapping.
+ This can be useful in optimizing the layout of kernel virtual
+ memory.
+
+ Say N here unless you know what you are doing.
+
+config LOWMEM_SIZE
+ hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
+ default "0x30000000"
+
+config KERNEL_START_BOOL
+ bool "Set custom kernel base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the kernel virtual address at which
+ the kernel will map low memory (the kernel image will be linked at
+ this address). This can be useful in optimizing the virtual memory
+ layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config KERNEL_START
+ hex "Virtual address of kernel base" if KERNEL_START_BOOL
+ default "0xc0000000"
+
+config TASK_SIZE_BOOL
+ bool "Set custom user task size"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the amount of virtual address space
+ allocated to user tasks. This can be useful in optimizing the
+ virtual memory layout of the system.
+
+ Say N here unless you know what you are doing.
+
+config TASK_SIZE
+ hex "Size of user task space" if TASK_SIZE_BOOL
+ default "0x80000000"
+
+config CONSISTENT_START_BOOL
+ bool "Set custom consistent memory pool address"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the base virtual address
+ of the the consistent memory pool. This pool of virtual
+ memory is used to make consistent memory allocations.
+
+config CONSISTENT_START
+ hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
+ default "0xff100000" if NOT_COHERENT_CACHE
+
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ default "0x00200000" if NOT_COHERENT_CACHE
+
+config BOOT_LOAD_BOOL
+ bool "Set the boot link/load address"
+ depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
+ help
+ This option allows you to set the initial load address of the zImage
+ or zImage.initrd file. This can be useful if you are on a board
+ which has a small amount of memory.
+
+ Say N here unless you know what you are doing.
+
+config BOOT_LOAD
+ hex "Link/load address for booting" if BOOT_LOAD_BOOL
+ default "0x00400000" if 40x || 8xx || 8260
+ default "0x01000000" if 44x
+ default "0x00800000"
+
+config PIN_TLB
+ bool "Pinned Kernel TLBs (860 ONLY)"
+ depends on ADVANCED_OPTIONS && 8xx
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+# XXX source "arch/ppc/8xx_io/Kconfig"
+
+# XXX source "arch/ppc/8260_io/Kconfig"
+
+source "arch/powerpc/platforms/iseries/Kconfig"
+
+source "lib/Kconfig"
+
+source "arch/powerpc/oprofile/Kconfig"
+
+source "arch/powerpc/Kconfig.debug"
+
+source "security/Kconfig"
+
+config KEYS_COMPAT
+ bool
+ depends on COMPAT && KEYS
+ default y
+
+source "crypto/Kconfig"
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
new file mode 100644
index 0000000..61653cb
--- /dev/null
+++ b/arch/powerpc/Kconfig.debug
@@ -0,0 +1,73 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config KGDB
+ bool "Include kgdb kernel debugger"
+ depends on DEBUG_KERNEL && (BROKEN || PPC_GEN550 || 4xx)
+ select DEBUG_INFO
+ help
+ Include in-kernel hooks for kgdb, the Linux kernel source level
+ debugger. See <http://kgdb.sourceforge.net/> for more information.
+ Unless you are intending to debug the kernel, say N here.
+
+choice
+ prompt "Serial Port"
+ depends on KGDB
+ default KGDB_TTYS1
+
+config KGDB_TTYS0
+ bool "ttyS0"
+
+config KGDB_TTYS1
+ bool "ttyS1"
+
+config KGDB_TTYS2
+ bool "ttyS2"
+
+config KGDB_TTYS3
+ bool "ttyS3"
+
+endchoice
+
+config KGDB_CONSOLE
+ bool "Enable serial console thru kgdb port"
+ depends on KGDB && 8xx || CPM2
+ help
+ If you enable this, all serial console messages will be sent
+ over the gdb stub.
+ If unsure, say N.
+
+config XMON
+ bool "Include xmon kernel debugger"
+ depends on DEBUG_KERNEL
+ help
+ Include in-kernel hooks for the xmon kernel monitor/debugger.
+ Unless you are intending to debug the kernel, say N here.
+
+config BDI_SWITCH
+ bool "Include BDI-2000 user context switcher"
+ depends on DEBUG_KERNEL
+ help
+ Include in-kernel support for the Abatron BDI2000 debugger.
+ Unless you are intending to debug the kernel with one of these
+ machines, say N here.
+
+config BOOTX_TEXT
+ bool "Support for early boot text console (BootX or OpenFirmware only)"
+ depends PPC_OF
+ help
+ Say Y here to see progress messages from the boot firmware in text
+ mode. Requires either BootX or Open Firmware.
+
+config SERIAL_TEXT_DEBUG
+ bool "Support for early boot texts over serial port"
+ depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
+ PPC_GEN550 || PPC_MPC52xx
+
+config PPC_OCP
+ bool
+ depends on IBM_OCP || XILINX_OCP
+ default y
+
+endmenu
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
new file mode 100644
index 0000000..8a65e11
--- /dev/null
+++ b/arch/powerpc/Makefile
@@ -0,0 +1,222 @@
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1994 by Linus Torvalds
+# Changes for PPC by Gary Thomas
+# Rewritten by Cort Dougan and Paul Mackerras
+#
+
+# This must match PAGE_OFFSET in include/asm-powerpc/page.h.
+KERNELLOAD := $(CONFIG_KERNEL_START)
+
+HAS_BIARCH := $(call cc-option-yn, -m32)
+
+ifeq ($(CONFIG_PPC64),y)
+SZ := 64
+
+# Set default 32 bits cross compilers for vdso and boot wrapper
+CROSS32_COMPILE ?=
+
+CROSS32CC := $(CROSS32_COMPILE)gcc
+CROSS32AS := $(CROSS32_COMPILE)as
+CROSS32LD := $(CROSS32_COMPILE)ld
+CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy
+
+ifeq ($(HAS_BIARCH),y)
+ifeq ($(CROSS32_COMPILE),)
+CROSS32CC := $(CC) -m32
+CROSS32AS := $(AS) -a32
+CROSS32LD := $(LD) -m elf32ppc
+CROSS32OBJCOPY := $(OBJCOPY)
+endif
+endif
+
+export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY
+
+new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi)
+
+ifeq ($(new_nm),y)
+NM := $(NM) --synthetic
+endif
+
+else
+SZ := 32
+endif
+
+ifeq ($(HAS_BIARCH),y)
+override AS += -a$(SZ)
+override LD += -m elf$(SZ)ppc
+override CC += -m$(SZ)
+endif
+
+LDFLAGS_vmlinux := -Ttext $(KERNELLOAD) -Bstatic -e $(KERNELLOAD)
+
+# The -Iarch/$(ARCH)/include is temporary while we are merging
+CPPFLAGS += -Iarch/$(ARCH) -Iarch/$(ARCH)/include
+AFLAGS += -Iarch/$(ARCH)
+CFLAGS += -Iarch/$(ARCH) -msoft-float -pipe
+ifeq ($(CONFIG_PPC64),y)
+CFLAGS += -mminimal-toc -mtraceback=none -mcall-aixdesc
+else
+CFLAGS += -ffixed-r2 -mmultiple
+endif
+CPP = $(CC) -E $(CFLAGS)
+# Temporary hack until we have migrated to asm-powerpc
+LINUXINCLUDE += -Iarch/$(ARCH)/include
+
+CHECKFLAGS += -m$(SZ) -D__powerpc__ -D__powerpc$(SZ)__
+
+ifeq ($(CONFIG_PPC64),y)
+GCC_VERSION := $(call cc-version)
+GCC_BROKEN_VEC := $(shell if [ $(GCC_VERSION) -lt 0400 ] ; then echo "y"; fi)
+
+ifeq ($(CONFIG_POWER4_ONLY),y)
+ifeq ($(CONFIG_ALTIVEC),y)
+ifeq ($(GCC_BROKEN_VEC),y)
+ CFLAGS += $(call cc-option,-mcpu=970)
+else
+ CFLAGS += $(call cc-option,-mcpu=power4)
+endif
+else
+ CFLAGS += $(call cc-option,-mcpu=power4)
+endif
+else
+ CFLAGS += $(call cc-option,-mtune=power4)
+endif
+endif
+
+# Enable unit-at-a-time mode when possible. It shrinks the
+# kernel considerably.
+CFLAGS += $(call cc-option,-funit-at-a-time)
+
+ifndef CONFIG_FSL_BOOKE
+CFLAGS += -mstring
+endif
+
+cpu-as-$(CONFIG_PPC64BRIDGE) += -Wa,-mppc64bridge
+cpu-as-$(CONFIG_4xx) += -Wa,-m405
+cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
+cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
+cpu-as-$(CONFIG_E500) += -Wa,-me500
+cpu-as-$(CONFIG_E200) += -Wa,-me200
+
+AFLAGS += $(cpu-as-y)
+CFLAGS += $(cpu-as-y)
+
+# Default to the common case.
+KBUILD_DEFCONFIG := common_defconfig
+
+head-y := arch/powerpc/kernel/head.o
+head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o
+head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o
+head-$(CONFIG_4xx) := arch/powerpc/kernel/head_4xx.o
+head-$(CONFIG_44x) := arch/powerpc/kernel/head_44x.o
+head-$(CONFIG_FSL_BOOKE) := arch/powerpc/kernel/head_fsl_booke.o
+
+ifeq ($(CONFIG_PPC32),y)
+head-$(CONFIG_6xx) += arch/powerpc/kernel/idle_6xx.o
+head-$(CONFIG_POWER4) += arch/powerpc/kernel/idle_power4.o
+head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o
+endif
+
+core-y += arch/powerpc/kernel/ \
+ arch/powerpc/mm/ \
+ arch/powerpc/lib/ \
+ arch/powerpc/sysdev/
+core-$(CONFIG_PPC32) += arch/ppc/kernel/ \
+ arch/ppc/syslib/
+core-$(CONFIG_PPC64) += arch/ppc64/kernel/
+core-$(CONFIG_PPC_PMAC) += arch/powerpc/platforms/powermac/
+core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/
+core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/
+core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/
+core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/
+core-$(CONFIG_XMON) += arch/powerpc/xmon/
+core-$(CONFIG_APUS) += arch/ppc/amiga/
+drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/
+drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/
+drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/
+
+drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/
+
+BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
+
+.PHONY: $(BOOT_TARGETS)
+
+all: uImage zImage
+
+CPPFLAGS_vmlinux.lds := -Upowerpc
+
+# All the instructions talk about "make bzImage".
+bzImage: zImage
+
+boot := arch/$(ARCH)/boot
+
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
+uImage: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot)/images $(boot)/images/$@
+
+define archhelp
+ @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)'
+ @echo ' uImage - Create a bootable image for U-Boot / PPCBoot'
+ @echo ' install - Install kernel using'
+ @echo ' (your) ~/bin/installkernel or'
+ @echo ' (distribution) /sbin/installkernel or'
+ @echo ' install to $$(INSTALL_PATH) and run lilo'
+ @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs'
+endef
+
+archclean:
+ $(Q)$(MAKE) $(clean)=arch/ppc/boot
+ # Temporary hack until we have migrated to asm-powerpc
+ $(Q)rm -rf arch/$(ARCH)/include
+
+archprepare: checkbin
+
+# Temporary hack until we have migrated to asm-powerpc
+ifeq ($(CONFIG_PPC64),y)
+include/asm: arch/$(ARCH)/include/asm
+arch/$(ARCH)/include/asm:
+ $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
+ $(Q)ln -fsn $(srctree)/include/asm-ppc64 arch/$(ARCH)/include/asm
+else
+include/asm: arch/$(ARCH)/include/asm
+arch/$(ARCH)/include/asm:
+ $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
+ $(Q)ln -fsn $(srctree)/include/asm-ppc arch/$(ARCH)/include/asm
+endif
+
+# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
+# to stdout and these checks are run even on install targets.
+TOUT := .tmp_gas_check
+# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
+# instructions.
+# gcc-3.4 and binutils-2.14 are a fatal combination.
+GCC_VERSION := $(call cc-version)
+
+checkbin:
+ @if test "$(GCC_VERSION)" = "0304" ; then \
+ if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
+ echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
+ echo 'correctly with gcc-3.4 and your version of binutils.'; \
+ echo '*** Please upgrade your binutils or downgrade your gcc'; \
+ false; \
+ fi ; \
+ fi
+ @if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
+ echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
+ echo 'correctly with old versions of binutils.' ; \
+ echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
+ false ; \
+ fi
+
+CLEAN_FILES += $(TOUT)
+
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
new file mode 100644
index 0000000..62c4a51
--- /dev/null
+++ b/arch/powerpc/kernel/Makefile
@@ -0,0 +1,18 @@
+#
+# Makefile for the linux kernel.
+#
+
+extra-$(CONFIG_PPC_STD_MMU) := head.o
+extra_$(CONFIG_PPC64) := head_64.o
+extra-$(CONFIG_40x) := head_4xx.o
+extra-$(CONFIG_44x) := head_44x.o
+extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
+extra-$(CONFIG_8xx) := head_8xx.o
+extra-$(CONFIG_6xx) += idle_6xx.o
+extra-$(CONFIG_POWER4) += idle_power4.o
+extra-$(CONFIG_PPC_FPU) += fpu.o
+extra-y += vmlinux.lds
+
+obj-y := semaphore.o traps.o process.o
+
+obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
new file mode 100644
index 0000000..16cf0b7
--- /dev/null
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -0,0 +1,262 @@
+/*
+ * This program is used to generate definitions needed by
+ * assembly language modules.
+ *
+ * We use the technique used in the OSF Mach kernel code:
+ * generate asm statements containing #defines,
+ * compile this file to assembler, and then extract the
+ * #defines from the assembly-language output.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/suspend.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/time.h>
+#include <linux/hardirq.h>
+#include <asm/io.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/lppaca.h>
+#include <asm/iSeries/HvLpEvent.h>
+#include <asm/rtas.h>
+#include <asm/cache.h>
+#include <asm/systemcfg.h>
+#include <asm/compat.h>
+#endif
+
+#define DEFINE(sym, val) \
+ asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define BLANK() asm volatile("\n->" : : )
+
+int main(void)
+{
+ /* thread struct on stack */
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+#ifdef CONFIG_PPC32
+ DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
+#endif
+#ifdef CONFIG_PPC64
+ DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror));
+ DEFINE(THREAD_SHIFT, THREAD_SHIFT);
+#endif
+ DEFINE(THREAD_SIZE, THREAD_SIZE);
+
+ /* task_struct->thread */
+ DEFINE(THREAD, offsetof(struct task_struct, thread));
+ DEFINE(THREAD_INFO, offsetof(struct task_struct, thread_info));
+ DEFINE(MM, offsetof(struct task_struct, mm));
+ DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
+ DEFINE(KSP, offsetof(struct thread_struct, ksp));
+ DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
+ DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall));
+ DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
+ DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
+ DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
+ DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+ DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
+ DEFINE(PT_PTRACED, PT_PTRACED);
+#endif
+#ifdef CONFIG_PPC64
+ DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
+#endif
+
+#ifdef CONFIG_ALTIVEC
+ DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
+ DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
+ DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
+ DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
+ DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc));
+ DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr));
+ DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe));
+#endif /* CONFIG_SPE */
+ /* Interrupt register frame */
+ DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
+#ifndef CONFIG_PPC64
+ DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+#else
+ DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
+
+ /* 288 = # of volatile regs, int & fp, for leaf routines */
+ /* which do not stack a frame. See the PPC64 ABI. */
+ DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288);
+#endif
+ /* in fact we only use gpr0 - gpr9 and gpr20 - gpr23 */
+ DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
+ DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
+ DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
+ DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3]));
+ DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4]));
+ DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5]));
+ DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6]));
+ DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7]));
+ DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8]));
+ DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9]));
+ DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10]));
+ DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
+ DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
+ DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
+ DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
+ DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
+ DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
+ DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
+ DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
+ DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
+ DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
+ DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
+ DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
+ DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
+ DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
+ DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
+ DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
+ DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
+ DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
+ DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
+ DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
+ DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
+ /*
+ * Note: these symbols include _ because they overlap with special
+ * register names
+ */
+ DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip));
+ DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr));
+ DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr));
+ DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link));
+ DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr));
+ DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
+ DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer));
+ DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
+ DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
+ /* The PowerPC 400-class & Book-E processors have neither the DAR nor the DSISR
+ * SPRs. Hence, we overload them to hold the similar DEAR and ESR SPRs
+ * for such processors. For critical interrupts we use them to
+ * hold SRR0 and SRR1.
+ */
+ DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
+ DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
+ DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
+ DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
+ DEFINE(TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
+ DEFINE(CLONE_VM, CLONE_VM);
+ DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
+ DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
+
+ /* About the CPU features table */
+ DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
+ DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
+ DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
+ DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
+ DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
+
+#ifdef CONFIG_PPC64
+ DEFINE(MM, offsetof(struct task_struct, mm));
+ DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+
+ DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
+ DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size));
+ DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page));
+ DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size));
+ DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size));
+ DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page));
+ DEFINE(PLATFORM, offsetof(struct systemcfg, platform));
+
+ /* paca */
+ DEFINE(PACA_SIZE, sizeof(struct paca_struct));
+ DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index));
+ DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start));
+ DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack));
+ DEFINE(PACACURRENT, offsetof(struct paca_struct, __current));
+ DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr));
+ DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
+ DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
+ DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr));
+ DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1));
+ DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc));
+ DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled));
+ DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache));
+ DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr));
+ DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id));
+#ifdef CONFIG_HUGETLB_PAGE
+ DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas));
+ DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas));
+#endif /* CONFIG_HUGETLB_PAGE */
+ DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr));
+ DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
+ DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
+ DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb));
+ DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi));
+ DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp));
+ DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca));
+ DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
+ DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0));
+ DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1));
+ DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
+ DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
+
+ /* RTAS */
+ DEFINE(RTASBASE, offsetof(struct rtas_t, base));
+ DEFINE(RTASENTRY, offsetof(struct rtas_t, entry));
+
+ DEFINE(_TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
+ DEFINE(SOFTE, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, softe));
+
+ /* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */
+ DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
+ DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16);
+
+ /* These _only_ to be used with {PROM,RTAS}_FRAME_SIZE!!! */
+ DEFINE(_SRR0, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs));
+ DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
+
+ /* systemcfg offsets for use by vdso */
+ DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp));
+ DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec));
+ DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs));
+ DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec));
+ DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count));
+ DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest));
+ DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime));
+ DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32));
+ DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64));
+
+ /* timeval/timezone offsets for use by vdso */
+ DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec));
+ DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec));
+ DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec));
+ DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec));
+ DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
+ DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
+#endif
+
+ DEFINE(pbe_address, offsetof(struct pbe, address));
+ DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
+ DEFINE(pbe_next, offsetof(struct pbe, next));
+
+ DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
+ return 0;
+}
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
new file mode 100644
index 0000000..665d7d3
--- /dev/null
+++ b/arch/powerpc/kernel/fpu.S
@@ -0,0 +1,133 @@
+/*
+ * FPU support code, moved here from head.S so that it can be used
+ * by chips which use other head-whatever.S files.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * This task wants to use the FPU now.
+ * On UP, disable FP for the task which had the FPU previously,
+ * and save its floating-point registers in its thread_struct.
+ * Load up this task's FP registers from its thread_struct,
+ * enable the FPU for the current task and return to the task.
+ */
+ .globl load_up_fpu
+load_up_fpu:
+ mfmsr r5
+ ori r5,r5,MSR_FP
+#ifdef CONFIG_PPC64BRIDGE
+ clrldi r5,r5,1 /* turn off 64-bit mode */
+#endif /* CONFIG_PPC64BRIDGE */
+ SYNC
+ MTMSRD(r5) /* enable use of fpu now */
+ isync
+/*
+ * For SMP, we don't do lazy FPU switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_fpu in switch_to.
+ */
+#ifndef CONFIG_SMP
+ tophys(r6,0) /* get __pa constant */
+ addis r3,r6,last_task_used_math@ha
+ lwz r4,last_task_used_math@l(r3)
+ cmpwi 0,r4,0
+ beq 1f
+ add r4,r4,r6
+ addi r4,r4,THREAD /* want last_task_used_math->thread */
+ SAVE_32FPRS(0, r4)
+ mffs fr0
+ stfd fr0,THREAD_FPSCR-4(r4)
+ lwz r5,PT_REGS(r4)
+ add r5,r5,r6
+ lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ li r10,MSR_FP|MSR_FE0|MSR_FE1
+ andc r4,r4,r10 /* disable FP for previous task */
+ stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* enable use of FP after return */
+ mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ lwz r4,THREAD_FPEXC_MODE(r5)
+ ori r9,r9,MSR_FP /* enable FP for current */
+ or r9,r9,r4
+ lfd fr0,THREAD_FPSCR-4(r5)
+ mtfsf 0xff,fr0
+ REST_32FPRS(0, r5)
+#ifndef CONFIG_SMP
+ subi r4,r5,THREAD
+ sub r4,r4,r6
+ stw r4,last_task_used_math@l(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ /* we haven't used ctr or xer or lr */
+ b fast_exception_return
+
+/*
+ * FP unavailable trap from kernel - print a message, but let
+ * the task use FP in the kernel until it returns to user mode.
+ */
+ .globl KernelFP
+KernelFP:
+ lwz r3,_MSR(r1)
+ ori r3,r3,MSR_FP
+ stw r3,_MSR(r1) /* enable use of FP after return */
+ lis r3,86f@h
+ ori r3,r3,86f@l
+ mr r4,r2 /* current */
+ lwz r5,_NIP(r1)
+ bl printk
+ b ret_from_except
+86: .string "floating point used in kernel (task=%p, pc=%x)\n"
+ .align 4,0
+
+/*
+ * giveup_fpu(tsk)
+ * Disable FP for the task given as the argument,
+ * and save the floating-point registers in its thread_struct.
+ * Enables the FPU for use in the kernel on return.
+ */
+ .globl giveup_fpu
+giveup_fpu:
+ mfmsr r5
+ ori r5,r5,MSR_FP
+ SYNC_601
+ ISYNC_601
+ MTMSRD(r5) /* enable use of fpu now */
+ SYNC_601
+ isync
+ cmpwi 0,r3,0
+ beqlr- /* if no previous owner, done */
+ addi r3,r3,THREAD /* want THREAD of task */
+ lwz r5,PT_REGS(r3)
+ cmpwi 0,r5,0
+ SAVE_32FPRS(0, r3)
+ mffs fr0
+ stfd fr0,THREAD_FPSCR-4(r3)
+ beq 1f
+ lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ li r3,MSR_FP|MSR_FE0|MSR_FE1
+ andc r4,r4,r3 /* disable FP for previous task */
+ stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+ li r5,0
+ lis r4,last_task_used_math@ha
+ stw r5,last_task_used_math@l(r4)
+#endif /* CONFIG_SMP */
+ blr
diff --git a/arch/powerpc/kernel/head.S b/arch/powerpc/kernel/head.S
new file mode 100644
index 0000000..d05509f
--- /dev/null
+++ b/arch/powerpc/kernel/head.S
@@ -0,0 +1,1545 @@
+/*
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Adapted for Power Macintosh by Paul Mackerras.
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * This file contains the low-level support and setup for the
+ * PowerPC platform, including trap and interrupt dispatch.
+ * (The PPC 8xx embedded CPUs use head_8xx.S instead.)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_APUS
+#include <asm/amigappc.h>
+#endif
+
+#ifdef CONFIG_PPC64BRIDGE
+#define LOAD_BAT(n, reg, RA, RB) \
+ ld RA,(n*32)+0(reg); \
+ ld RB,(n*32)+8(reg); \
+ mtspr SPRN_IBAT##n##U,RA; \
+ mtspr SPRN_IBAT##n##L,RB; \
+ ld RA,(n*32)+16(reg); \
+ ld RB,(n*32)+24(reg); \
+ mtspr SPRN_DBAT##n##U,RA; \
+ mtspr SPRN_DBAT##n##L,RB; \
+
+#else /* CONFIG_PPC64BRIDGE */
+
+/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
+#define LOAD_BAT(n, reg, RA, RB) \
+ /* see the comment for clear_bats() -- Cort */ \
+ li RA,0; \
+ mtspr SPRN_IBAT##n##U,RA; \
+ mtspr SPRN_DBAT##n##U,RA; \
+ lwz RA,(n*16)+0(reg); \
+ lwz RB,(n*16)+4(reg); \
+ mtspr SPRN_IBAT##n##U,RA; \
+ mtspr SPRN_IBAT##n##L,RB; \
+ beq 1f; \
+ lwz RA,(n*16)+8(reg); \
+ lwz RB,(n*16)+12(reg); \
+ mtspr SPRN_DBAT##n##U,RA; \
+ mtspr SPRN_DBAT##n##L,RB; \
+1:
+#endif /* CONFIG_PPC64BRIDGE */
+
+ .text
+ .stabs "arch/ppc/kernel/",N_SO,0,0,0f
+ .stabs "head.S",N_SO,0,0,0f
+0:
+ .globl _stext
+_stext:
+
+/*
+ * _start is defined this way because the XCOFF loader in the OpenFirmware
+ * on the powermac expects the entry point to be a procedure descriptor.
+ */
+ .text
+ .globl _start
+_start:
+ /*
+ * These are here for legacy reasons, the kernel used to
+ * need to look like a coff function entry for the pmac
+ * but we're always started by some kind of bootloader now.
+ * -- Cort
+ */
+ nop /* used by __secondary_hold on prep (mtx) and chrp smp */
+ nop /* used by __secondary_hold on prep (mtx) and chrp smp */
+ nop
+
+/* PMAC
+ * Enter here with the kernel text, data and bss loaded starting at
+ * 0, running with virtual == physical mapping.
+ * r5 points to the prom entry point (the client interface handler
+ * address). Address translation is turned on, with the prom
+ * managing the hash table. Interrupts are disabled. The stack
+ * pointer (r1) points to just below the end of the half-meg region
+ * from 0x380000 - 0x400000, which is mapped in already.
+ *
+ * If we are booted from MacOS via BootX, we enter with the kernel
+ * image loaded somewhere, and the following values in registers:
+ * r3: 'BooX' (0x426f6f58)
+ * r4: virtual address of boot_infos_t
+ * r5: 0
+ *
+ * APUS
+ * r3: 'APUS'
+ * r4: physical address of memory base
+ * Linux/m68k style BootInfo structure at &_end.
+ *
+ * PREP
+ * This is jumped to on prep systems right after the kernel is relocated
+ * to its proper place in memory by the boot loader. The expected layout
+ * of the regs is:
+ * r3: ptr to residual data
+ * r4: initrd_start or if no initrd then 0
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ *
+ * This just gets a minimal mmu environment setup so we can call
+ * start_here() to do the real work.
+ * -- Cort
+ */
+
+ .globl __start
+__start:
+/*
+ * We have to do any OF calls before we map ourselves to KERNELBASE,
+ * because OF may have I/O devices mapped into that area
+ * (particularly on CHRP).
+ */
+ mr r31,r3 /* save parameters */
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+ li r24,0 /* cpu # */
+
+/*
+ * early_init() does the early machine identification and does
+ * the necessary low-level setup and clears the BSS
+ * -- Cort <cort@fsmlabs.com>
+ */
+ bl early_init
+
+/*
+ * On POWER4, we first need to tweak some CPU configuration registers
+ * like real mode cache inhibit or exception base
+ */
+#ifdef CONFIG_POWER4
+ bl __970_cpu_preinit
+#endif /* CONFIG_POWER4 */
+
+#ifdef CONFIG_APUS
+/* On APUS the __va/__pa constants need to be set to the correct
+ * values before continuing.
+ */
+ mr r4,r30
+ bl fix_mem_constants
+#endif /* CONFIG_APUS */
+
+/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
+ * the physical address we are running at, returned by early_init()
+ */
+ bl mmu_off
+__after_mmu_off:
+#ifndef CONFIG_POWER4
+ bl clear_bats
+ bl flush_tlbs
+
+ bl initial_bats
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+ bl setup_disp_bat
+#endif
+#else /* CONFIG_POWER4 */
+ bl reloc_offset
+ bl initial_mm_power4
+#endif /* CONFIG_POWER4 */
+
+/*
+ * Call setup_cpu for CPU 0 and initialize 6xx Idle
+ */
+ bl reloc_offset
+ li r24,0 /* cpu# */
+ bl call_setup_cpu /* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+ bl reloc_offset
+ bl init_idle_6xx
+#endif /* CONFIG_6xx */
+#ifdef CONFIG_POWER4
+ bl reloc_offset
+ bl init_idle_power4
+#endif /* CONFIG_POWER4 */
+
+
+#ifndef CONFIG_APUS
+/*
+ * We need to run with _start at physical address 0.
+ * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
+ * the exception vectors at 0 (and therefore this copy
+ * overwrites OF's exception vectors with our own).
+ * If the MMU is already turned on, we copy stuff to KERNELBASE,
+ * otherwise we copy it to 0.
+ */
+ bl reloc_offset
+ mr r26,r3
+ addis r4,r3,KERNELBASE@h /* current address of _start */
+ cmpwi 0,r4,0 /* are we already running at 0? */
+ bne relocate_kernel
+#endif /* CONFIG_APUS */
+/*
+ * we now have the 1st 16M of ram mapped with the bats.
+ * prep needs the mmu to be turned on here, but pmac already has it on.
+ * this shouldn't bother the pmac since it just gets turned on again
+ * as we jump to our code at KERNELBASE. -- Cort
+ * Actually no, pmac doesn't have it on any more. BootX enters with MMU
+ * off, and in other cases, we now turn it off before changing BATs above.
+ */
+turn_on_mmu:
+ mfmsr r0
+ ori r0,r0,MSR_DR|MSR_IR
+ mtspr SPRN_SRR1,r0
+ lis r0,start_here@h
+ ori r0,r0,start_here@l
+ mtspr SPRN_SRR0,r0
+ SYNC
+ RFI /* enables MMU */
+
+/*
+ * We need __secondary_hold as a place to hold the other cpus on
+ * an SMP machine, even when we are running a UP kernel.
+ */
+ . = 0xc0 /* for prep bootloader */
+ li r3,1 /* MTX only has 1 cpu */
+ .globl __secondary_hold
+__secondary_hold:
+ /* tell the master we're here */
+ stw r3,4(0)
+#ifdef CONFIG_SMP
+100: lwz r4,0(0)
+ /* wait until we're told to start */
+ cmpw 0,r4,r3
+ bne 100b
+ /* our cpu # was at addr 0 - go */
+ mr r24,r3 /* cpu # */
+ b __secondary_start
+#else
+ b .
+#endif /* CONFIG_SMP */
+
+/*
+ * Exception entry code. This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG \
+ mtspr SPRN_SPRG0,r10; \
+ mtspr SPRN_SPRG1,r11; \
+ mfcr r10; \
+ EXCEPTION_PROLOG_1; \
+ EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1 \
+ mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
+ andi. r11,r11,MSR_PR; \
+ tophys(r11,r1); /* use tophys(r1) if kernel */ \
+ beq 1f; \
+ mfspr r11,SPRN_SPRG3; \
+ lwz r11,THREAD_INFO-THREAD(r11); \
+ addi r11,r11,THREAD_SIZE; \
+ tophys(r11,r11); \
+1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2 \
+ CLR_TOP32(r11); \
+ stw r10,_CCR(r11); /* save registers */ \
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mfspr r10,SPRN_SPRG0; \
+ stw r10,GPR10(r11); \
+ mfspr r12,SPRN_SPRG1; \
+ stw r12,GPR11(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_SRR0; \
+ mfspr r9,SPRN_SRR1; \
+ stw r1,GPR1(r11); \
+ stw r1,0(r11); \
+ tovirt(r1,r11); /* set new kernel sp */ \
+ li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+ MTMSRD(r10); /* (except for mach check in rtas) */ \
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,TRAP(r11); \
+ li r10,MSR_KERNEL; \
+ copyee(r10, r9); \
+ bl tfer; \
+i##n: \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+/* System reset */
+/* core99 pmac starts the seconary here by changing the vector, and
+ putting it back to what it was (UnknownException) when done. */
+#if defined(CONFIG_GEMINI) && defined(CONFIG_SMP)
+ . = 0x100
+ b __secondary_start_gemini
+#else
+ EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+#endif
+
+/* Machine check */
+/*
+ * On CHRP, this is complicated by the fact that we could get a
+ * machine check inside RTAS, and we have no guarantee that certain
+ * critical registers will have the values we expect. The set of
+ * registers that might have bad values includes all the GPRs
+ * and all the BATs. We indicate that we are in RTAS by putting
+ * a non-zero value, the address of the exception frame to use,
+ * in SPRG2. The machine check handler checks SPRG2 and uses its
+ * value if it is non-zero. If we ever needed to free up SPRG2,
+ * we could use a field in the thread_info or thread_struct instead.
+ * (Other exception handlers assume that r1 is a valid kernel stack
+ * pointer when we take an exception from supervisor mode.)
+ * -- paulus.
+ */
+ . = 0x200
+ mtspr SPRN_SPRG0,r10
+ mtspr SPRN_SPRG1,r11
+ mfcr r10
+#ifdef CONFIG_PPC_CHRP
+ mfspr r11,SPRN_SPRG2
+ cmpwi 0,r11,0
+ bne 7f
+#endif /* CONFIG_PPC_CHRP */
+ EXCEPTION_PROLOG_1
+7: EXCEPTION_PROLOG_2
+ addi r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_CHRP
+ mfspr r4,SPRN_SPRG2
+ cmpwi cr1,r4,0
+ bne cr1,1f
+#endif
+ EXC_XFER_STD(0x200, MachineCheckException)
+#ifdef CONFIG_PPC_CHRP
+1: b machine_check_in_rtas
+#endif
+
+/* Data access exception. */
+ . = 0x300
+#ifdef CONFIG_PPC64BRIDGE
+ b DataAccess
+DataAccessCont:
+#else
+DataAccess:
+ EXCEPTION_PROLOG
+#endif /* CONFIG_PPC64BRIDGE */
+ mfspr r10,SPRN_DSISR
+ andis. r0,r10,0xa470 /* weird error? */
+ bne 1f /* if not, try to put a PTE */
+ mfspr r4,SPRN_DAR /* into the hash table */
+ rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
+ bl hash_page
+1: stw r10,_DSISR(r11)
+ mr r5,r10
+ mfspr r4,SPRN_DAR
+ EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+#ifdef CONFIG_PPC64BRIDGE
+/* SLB fault on data access. */
+ . = 0x380
+ b DataSegment
+#endif /* CONFIG_PPC64BRIDGE */
+
+/* Instruction access exception. */
+ . = 0x400
+#ifdef CONFIG_PPC64BRIDGE
+ b InstructionAccess
+InstructionAccessCont:
+#else
+InstructionAccess:
+ EXCEPTION_PROLOG
+#endif /* CONFIG_PPC64BRIDGE */
+ andis. r0,r9,0x4000 /* no pte found? */
+ beq 1f /* if so, try to put a PTE */
+ li r3,0 /* into the hash table */
+ mr r4,r12 /* SRR0 is fault address */
+ bl hash_page
+1: mr r4,r12
+ mr r5,r9
+ EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+#ifdef CONFIG_PPC64BRIDGE
+/* SLB fault on instruction access. */
+ . = 0x480
+ b InstructionSegment
+#endif /* CONFIG_PPC64BRIDGE */
+
+/* External interrupt */
+ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG
+ mfspr r4,SPRN_DAR
+ stw r4,_DAR(r11)
+ mfspr r5,SPRN_DSISR
+ stw r5,_DSISR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE(0x600, AlignmentException)
+
+/* Program check exception */
+ EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+
+/* Floating-point unavailable */
+ . = 0x800
+FPUnavailable:
+ EXCEPTION_PROLOG
+ bne load_up_fpu /* if from user, just load it up */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE_LITE(0x800, KernelFP)
+
+/* Decrementer */
+ EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+ EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+
+/* System call */
+ . = 0xc00
+SystemCall:
+ EXCEPTION_PROLOG
+ EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+ EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
+ EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
+
+/*
+ * The Altivec unavailable trap is at 0x0f20. Foo.
+ * We effectively remap it to 0x3000.
+ * We include an altivec unavailable exception vector even if
+ * not configured for Altivec, so that you can't panic a
+ * non-altivec kernel running on a machine with altivec just
+ * by executing an altivec instruction.
+ */
+ . = 0xf00
+ b Trap_0f
+
+ . = 0xf20
+ b AltiVecUnavailable
+
+Trap_0f:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE(0xf00, UnknownException)
+
+/*
+ * Handle TLB miss for instruction on 603/603e.
+ * Note: we get an alternate set of r0 - r3 to use automatically.
+ */
+ . = 0x1000
+InstructionTLBMiss:
+/*
+ * r0: stored ctr
+ * r1: linux style pte ( later becomes ppc hardware pte )
+ * r2: ptr to linux-style pte
+ * r3: scratch
+ */
+ mfctr r0
+ /* Get PTE (linux-style) and check access */
+ mfspr r3,SPRN_IMISS
+ lis r1,KERNELBASE@h /* check if kernel address */
+ cmplw 0,r3,r1
+ mfspr r2,SPRN_SPRG3
+ li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
+ lwz r2,PGDIR(r2)
+ blt+ 112f
+ lis r2,swapper_pg_dir@ha /* if kernel address, use */
+ addi r2,r2,swapper_pg_dir@l /* kernel page table */
+ mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
+ rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
+112: tophys(r2,r2)
+ rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lwz r2,0(r2) /* get pmd entry */
+ rlwinm. r2,r2,0,0,19 /* extract address of pte page */
+ beq- InstructionAddressInvalid /* return if no mapping */
+ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
+ lwz r3,0(r2) /* get linux-style pte */
+ andc. r1,r1,r3 /* check access & ~permission */
+ bne- InstructionAddressInvalid /* return if access not permitted */
+ ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
+ /*
+ * NOTE! We are assuming this is not an SMP system, otherwise
+ * we would need to update the pte atomically with lwarx/stwcx.
+ */
+ stw r3,0(r2) /* update PTE (accessed bit) */
+ /* Convert linux-style PTE to low word of PPC-style PTE */
+ rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ and r1,r1,r2 /* writable if _RW and _DIRTY */
+ rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ ori r1,r1,0xe14 /* clear out reserved bits and M */
+ andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ mtspr SPRN_RPA,r1
+ mfspr r3,SPRN_IMISS
+ tlbli r3
+ mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r3
+ rfi
+InstructionAddressInvalid:
+ mfspr r3,SPRN_SRR1
+ rlwinm r1,r3,9,6,6 /* Get load/store bit */
+
+ addis r1,r1,0x2000
+ mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
+ mtctr r0 /* Restore CTR */
+ andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
+ or r2,r2,r1
+ mtspr SPRN_SRR1,r2
+ mfspr r1,SPRN_IMISS /* Get failing address */
+ rlwinm. r2,r2,0,31,31 /* Check for little endian access */
+ rlwimi r2,r2,1,30,30 /* change 1 -> 3 */
+ xor r1,r1,r2
+ mtspr SPRN_DAR,r1 /* Set fault address */
+ mfmsr r0 /* Restore "normal" registers */
+ xoris r0,r0,MSR_TGPR>>16
+ mtcrf 0x80,r3 /* Restore CR0 */
+ mtmsr r0
+ b InstructionAccess
+
+/*
+ * Handle TLB miss for DATA Load operation on 603/603e
+ */
+ . = 0x1100
+DataLoadTLBMiss:
+/*
+ * r0: stored ctr
+ * r1: linux style pte ( later becomes ppc hardware pte )
+ * r2: ptr to linux-style pte
+ * r3: scratch
+ */
+ mfctr r0
+ /* Get PTE (linux-style) and check access */
+ mfspr r3,SPRN_DMISS
+ lis r1,KERNELBASE@h /* check if kernel address */
+ cmplw 0,r3,r1
+ mfspr r2,SPRN_SPRG3
+ li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
+ lwz r2,PGDIR(r2)
+ blt+ 112f
+ lis r2,swapper_pg_dir@ha /* if kernel address, use */
+ addi r2,r2,swapper_pg_dir@l /* kernel page table */
+ mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
+ rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
+112: tophys(r2,r2)
+ rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lwz r2,0(r2) /* get pmd entry */
+ rlwinm. r2,r2,0,0,19 /* extract address of pte page */
+ beq- DataAddressInvalid /* return if no mapping */
+ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
+ lwz r3,0(r2) /* get linux-style pte */
+ andc. r1,r1,r3 /* check access & ~permission */
+ bne- DataAddressInvalid /* return if access not permitted */
+ ori r3,r3,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
+ /*
+ * NOTE! We are assuming this is not an SMP system, otherwise
+ * we would need to update the pte atomically with lwarx/stwcx.
+ */
+ stw r3,0(r2) /* update PTE (accessed bit) */
+ /* Convert linux-style PTE to low word of PPC-style PTE */
+ rlwinm r1,r3,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r2,r3,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ and r1,r1,r2 /* writable if _RW and _DIRTY */
+ rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r3,r3,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ ori r1,r1,0xe14 /* clear out reserved bits and M */
+ andc r1,r3,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
+ mtspr SPRN_RPA,r1
+ mfspr r3,SPRN_DMISS
+ tlbld r3
+ mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r3
+ rfi
+DataAddressInvalid:
+ mfspr r3,SPRN_SRR1
+ rlwinm r1,r3,9,6,6 /* Get load/store bit */
+ addis r1,r1,0x2000
+ mtspr SPRN_DSISR,r1
+ mtctr r0 /* Restore CTR */
+ andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
+ mtspr SPRN_SRR1,r2
+ mfspr r1,SPRN_DMISS /* Get failing address */
+ rlwinm. r2,r2,0,31,31 /* Check for little endian access */
+ beq 20f /* Jump if big endian */
+ xori r1,r1,3
+20: mtspr SPRN_DAR,r1 /* Set fault address */
+ mfmsr r0 /* Restore "normal" registers */
+ xoris r0,r0,MSR_TGPR>>16
+ mtcrf 0x80,r3 /* Restore CR0 */
+ mtmsr r0
+ b DataAccess
+
+/*
+ * Handle TLB miss for DATA Store on 603/603e
+ */
+ . = 0x1200
+DataStoreTLBMiss:
+/*
+ * r0: stored ctr
+ * r1: linux style pte ( later becomes ppc hardware pte )
+ * r2: ptr to linux-style pte
+ * r3: scratch
+ */
+ mfctr r0
+ /* Get PTE (linux-style) and check access */
+ mfspr r3,SPRN_DMISS
+ lis r1,KERNELBASE@h /* check if kernel address */
+ cmplw 0,r3,r1
+ mfspr r2,SPRN_SPRG3
+ li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
+ lwz r2,PGDIR(r2)
+ blt+ 112f
+ lis r2,swapper_pg_dir@ha /* if kernel address, use */
+ addi r2,r2,swapper_pg_dir@l /* kernel page table */
+ mfspr r1,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
+ rlwinm r1,r1,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
+112: tophys(r2,r2)
+ rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lwz r2,0(r2) /* get pmd entry */
+ rlwinm. r2,r2,0,0,19 /* extract address of pte page */
+ beq- DataAddressInvalid /* return if no mapping */
+ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
+ lwz r3,0(r2) /* get linux-style pte */
+ andc. r1,r1,r3 /* check access & ~permission */
+ bne- DataAddressInvalid /* return if access not permitted */
+ ori r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
+ /*
+ * NOTE! We are assuming this is not an SMP system, otherwise
+ * we would need to update the pte atomically with lwarx/stwcx.
+ */
+ stw r3,0(r2) /* update PTE (accessed/dirty bits) */
+ /* Convert linux-style PTE to low word of PPC-style PTE */
+ rlwimi r3,r3,32-1,30,30 /* _PAGE_USER -> PP msb */
+ li r1,0xe15 /* clear out reserved bits and M */
+ andc r1,r3,r1 /* PP = user? 2: 0 */
+ mtspr SPRN_RPA,r1
+ mfspr r3,SPRN_DMISS
+ tlbld r3
+ mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r3
+ rfi
+
+#ifndef CONFIG_ALTIVEC
+#define AltivecAssistException UnknownException
+#endif
+
+ EXCEPTION(0x1300, Trap_13, InstructionBreakpoint, EXC_XFER_EE)
+ EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
+ EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+#ifdef CONFIG_POWER4
+ EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1700, Trap_17, AltivecAssistException, EXC_XFER_EE)
+ EXCEPTION(0x1800, Trap_18, TAUException, EXC_XFER_STD)
+#else /* !CONFIG_POWER4 */
+ EXCEPTION(0x1600, Trap_16, AltivecAssistException, EXC_XFER_EE)
+ EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
+ EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+#endif /* CONFIG_POWER4 */
+ EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
+ EXCEPTION(0x2100, Trap_21, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2200, Trap_22, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2300, Trap_23, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2400, Trap_24, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2500, Trap_25, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2600, Trap_26, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2700, Trap_27, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2800, Trap_28, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2900, Trap_29, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2a00, Trap_2a, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2b00, Trap_2b, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2c00, Trap_2c, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2d00, Trap_2d, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2e00, Trap_2e, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x2f00, MOLTrampoline, UnknownException, EXC_XFER_EE_LITE)
+
+ .globl mol_trampoline
+ .set mol_trampoline, i0x2f00
+
+ . = 0x3000
+
+AltiVecUnavailable:
+ EXCEPTION_PROLOG
+#ifdef CONFIG_ALTIVEC
+ bne load_up_altivec /* if from user, just load it up */
+#endif /* CONFIG_ALTIVEC */
+ EXC_XFER_EE_LITE(0xf20, AltivecUnavailException)
+
+#ifdef CONFIG_PPC64BRIDGE
+DataAccess:
+ EXCEPTION_PROLOG
+ b DataAccessCont
+
+InstructionAccess:
+ EXCEPTION_PROLOG
+ b InstructionAccessCont
+
+DataSegment:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ mfspr r4,SPRN_DAR
+ stw r4,_DAR(r11)
+ EXC_XFER_STD(0x380, UnknownException)
+
+InstructionSegment:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_STD(0x480, UnknownException)
+#endif /* CONFIG_PPC64BRIDGE */
+
+#ifdef CONFIG_ALTIVEC
+/* Note that the AltiVec support is closely modeled after the FP
+ * support. Changes to one are likely to be applicable to the
+ * other! */
+load_up_altivec:
+/*
+ * Disable AltiVec for the task which had AltiVec previously,
+ * and save its AltiVec registers in its thread_struct.
+ * Enables AltiVec for use in the kernel on return.
+ * On SMP we know the AltiVec units are free, since we give it up every
+ * switch. -- Kumar
+ */
+ mfmsr r5
+ oris r5,r5,MSR_VEC@h
+ MTMSRD(r5) /* enable use of AltiVec now */
+ isync
+/*
+ * For SMP, we don't do lazy AltiVec switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_altivec in switch_to.
+ */
+#ifndef CONFIG_SMP
+ tophys(r6,0)
+ addis r3,r6,last_task_used_altivec@ha
+ lwz r4,last_task_used_altivec@l(r3)
+ cmpwi 0,r4,0
+ beq 1f
+ add r4,r4,r6
+ addi r4,r4,THREAD /* want THREAD of last_task_used_altivec */
+ SAVE_32VRS(0,r10,r4)
+ mfvscr vr0
+ li r10,THREAD_VSCR
+ stvx vr0,r10,r4
+ lwz r5,PT_REGS(r4)
+ add r5,r5,r6
+ lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r10,MSR_VEC@h
+ andc r4,r4,r10 /* disable altivec for previous task */
+ stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* enable use of AltiVec after return */
+ oris r9,r9,MSR_VEC@h
+ mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ li r4,1
+ li r10,THREAD_VSCR
+ stw r4,THREAD_USED_VR(r5)
+ lvx vr0,r10,r5
+ mtvscr vr0
+ REST_32VRS(0,r10,r5)
+#ifndef CONFIG_SMP
+ subi r4,r5,THREAD
+ sub r4,r4,r6
+ stw r4,last_task_used_altivec@l(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ /* we haven't used ctr or xer or lr */
+ b fast_exception_return
+
+/*
+ * AltiVec unavailable trap from kernel - print a message, but let
+ * the task use AltiVec in the kernel until it returns to user mode.
+ */
+KernelAltiVec:
+ lwz r3,_MSR(r1)
+ oris r3,r3,MSR_VEC@h
+ stw r3,_MSR(r1) /* enable use of AltiVec after return */
+ lis r3,87f@h
+ ori r3,r3,87f@l
+ mr r4,r2 /* current */
+ lwz r5,_NIP(r1)
+ bl printk
+ b ret_from_except
+87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
+ .align 4,0
+
+/*
+ * giveup_altivec(tsk)
+ * Disable AltiVec for the task given as the argument,
+ * and save the AltiVec registers in its thread_struct.
+ * Enables AltiVec for use in the kernel on return.
+ */
+
+ .globl giveup_altivec
+giveup_altivec:
+ mfmsr r5
+ oris r5,r5,MSR_VEC@h
+ SYNC
+ MTMSRD(r5) /* enable use of AltiVec now */
+ isync
+ cmpwi 0,r3,0
+ beqlr- /* if no previous owner, done */
+ addi r3,r3,THREAD /* want THREAD of task */
+ lwz r5,PT_REGS(r3)
+ cmpwi 0,r5,0
+ SAVE_32VRS(0, r4, r3)
+ mfvscr vr0
+ li r4,THREAD_VSCR
+ stvx vr0,r4,r3
+ beq 1f
+ lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r3,MSR_VEC@h
+ andc r4,r4,r3 /* disable AltiVec for previous task */
+ stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+ li r5,0
+ lis r4,last_task_used_altivec@ha
+ stw r5,last_task_used_altivec@l(r4)
+#endif /* CONFIG_SMP */
+ blr
+#endif /* CONFIG_ALTIVEC */
+
+/*
+ * This code is jumped to from the startup code to copy
+ * the kernel image to physical address 0.
+ */
+relocate_kernel:
+ addis r9,r26,klimit@ha /* fetch klimit */
+ lwz r25,klimit@l(r9)
+ addis r25,r25,-KERNELBASE@h
+ li r3,0 /* Destination base address */
+ li r6,0 /* Destination offset */
+ li r5,0x4000 /* # bytes of memory to copy */
+ bl copy_and_flush /* copy the first 0x4000 bytes */
+ addi r0,r3,4f@l /* jump to the address of 4f */
+ mtctr r0 /* in copy and do the rest. */
+ bctr /* jump to the copy */
+4: mr r5,r25
+ bl copy_and_flush /* copy the rest */
+ b turn_on_mmu
+
+/*
+ * Copy routine used to copy the kernel to start at physical address 0
+ * and flush and invalidate the caches as needed.
+ * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
+ * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
+ */
+copy_and_flush:
+ addi r5,r5,-4
+ addi r6,r6,-4
+4: li r0,L1_CACHE_LINE_SIZE/4
+ mtctr r0
+3: addi r6,r6,4 /* copy a cache line */
+ lwzx r0,r6,r4
+ stwx r0,r6,r3
+ bdnz 3b
+ dcbst r6,r3 /* write it to memory */
+ sync
+ icbi r6,r3 /* flush the icache line */
+ cmplw 0,r6,r5
+ blt 4b
+ sync /* additional sync needed on g4 */
+ isync
+ addi r5,r5,4
+ addi r6,r6,4
+ blr
+
+#ifdef CONFIG_APUS
+/*
+ * On APUS the physical base address of the kernel is not known at compile
+ * time, which means the __pa/__va constants used are incorrect. In the
+ * __init section is recorded the virtual addresses of instructions using
+ * these constants, so all that has to be done is fix these before
+ * continuing the kernel boot.
+ *
+ * r4 = The physical address of the kernel base.
+ */
+fix_mem_constants:
+ mr r10,r4
+ addis r10,r10,-KERNELBASE@h /* virt_to_phys constant */
+ neg r11,r10 /* phys_to_virt constant */
+
+ lis r12,__vtop_table_begin@h
+ ori r12,r12,__vtop_table_begin@l
+ add r12,r12,r10 /* table begin phys address */
+ lis r13,__vtop_table_end@h
+ ori r13,r13,__vtop_table_end@l
+ add r13,r13,r10 /* table end phys address */
+ subi r12,r12,4
+ subi r13,r13,4
+1: lwzu r14,4(r12) /* virt address of instruction */
+ add r14,r14,r10 /* phys address of instruction */
+ lwz r15,0(r14) /* instruction, now insert top */
+ rlwimi r15,r10,16,16,31 /* half of vp const in low half */
+ stw r15,0(r14) /* of instruction and restore. */
+ dcbst r0,r14 /* write it to memory */
+ sync
+ icbi r0,r14 /* flush the icache line */
+ cmpw r12,r13
+ bne 1b
+ sync /* additional sync needed on g4 */
+ isync
+
+/*
+ * Map the memory where the exception handlers will
+ * be copied to when hash constants have been patched.
+ */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+ lis r8,0xfff0
+#else
+ lis r8,0
+#endif
+ ori r8,r8,0x2 /* 128KB, supervisor */
+ mtspr SPRN_DBAT3U,r8
+ mtspr SPRN_DBAT3L,r8
+
+ lis r12,__ptov_table_begin@h
+ ori r12,r12,__ptov_table_begin@l
+ add r12,r12,r10 /* table begin phys address */
+ lis r13,__ptov_table_end@h
+ ori r13,r13,__ptov_table_end@l
+ add r13,r13,r10 /* table end phys address */
+ subi r12,r12,4
+ subi r13,r13,4
+1: lwzu r14,4(r12) /* virt address of instruction */
+ add r14,r14,r10 /* phys address of instruction */
+ lwz r15,0(r14) /* instruction, now insert top */
+ rlwimi r15,r11,16,16,31 /* half of pv const in low half*/
+ stw r15,0(r14) /* of instruction and restore. */
+ dcbst r0,r14 /* write it to memory */
+ sync
+ icbi r0,r14 /* flush the icache line */
+ cmpw r12,r13
+ bne 1b
+
+ sync /* additional sync needed on g4 */
+ isync /* No speculative loading until now */
+ blr
+
+/***********************************************************************
+ * Please note that on APUS the exception handlers are located at the
+ * physical address 0xfff0000. For this reason, the exception handlers
+ * cannot use relative branches to access the code below.
+ ***********************************************************************/
+#endif /* CONFIG_APUS */
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_GEMINI
+ .globl __secondary_start_gemini
+__secondary_start_gemini:
+ mfspr r4,SPRN_HID0
+ ori r4,r4,HID0_ICFI
+ li r3,0
+ ori r3,r3,HID0_ICE
+ andc r4,r4,r3
+ mtspr SPRN_HID0,r4
+ sync
+ b __secondary_start
+#endif /* CONFIG_GEMINI */
+
+ .globl __secondary_start_pmac_0
+__secondary_start_pmac_0:
+ /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
+ li r24,0
+ b 1f
+ li r24,1
+ b 1f
+ li r24,2
+ b 1f
+ li r24,3
+1:
+ /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
+ set to map the 0xf0000000 - 0xffffffff region */
+ mfmsr r0
+ rlwinm r0,r0,0,28,26 /* clear DR (0x10) */
+ SYNC
+ mtmsr r0
+ isync
+
+ .globl __secondary_start
+__secondary_start:
+#ifdef CONFIG_PPC64BRIDGE
+ mfmsr r0
+ clrldi r0,r0,1 /* make sure it's in 32-bit mode */
+ SYNC
+ MTMSRD(r0)
+ isync
+#endif
+ /* Copy some CPU settings from CPU 0 */
+ bl __restore_cpu_setup
+
+ lis r3,-KERNELBASE@h
+ mr r4,r24
+ bl identify_cpu
+ bl call_setup_cpu /* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+ lis r3,-KERNELBASE@h
+ bl init_idle_6xx
+#endif /* CONFIG_6xx */
+#ifdef CONFIG_POWER4
+ lis r3,-KERNELBASE@h
+ bl init_idle_power4
+#endif /* CONFIG_POWER4 */
+
+ /* get current_thread_info and current */
+ lis r1,secondary_ti@ha
+ tophys(r1,r1)
+ lwz r1,secondary_ti@l(r1)
+ tophys(r2,r1)
+ lwz r2,TI_TASK(r2)
+
+ /* stack */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r0,0
+ tophys(r3,r1)
+ stw r0,0(r3)
+
+ /* load up the MMU */
+ bl load_up_mmu
+
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* phys address of our thread_struct */
+ CLR_TOP32(r4)
+ mtspr SPRN_SPRG3,r4
+ li r3,0
+ mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+
+ /* enable MMU and jump to start_secondary */
+ li r4,MSR_KERNEL
+ FIX_SRR1(r4,r5)
+ lis r3,start_secondary@h
+ ori r3,r3,start_secondary@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ SYNC
+ RFI
+#endif /* CONFIG_SMP */
+
+/*
+ * Those generic dummy functions are kept for CPUs not
+ * included in CONFIG_6xx
+ */
+_GLOBAL(__setup_cpu_power3)
+ blr
+_GLOBAL(__setup_cpu_generic)
+ blr
+
+#if !defined(CONFIG_6xx) && !defined(CONFIG_POWER4)
+_GLOBAL(__save_cpu_setup)
+ blr
+_GLOBAL(__restore_cpu_setup)
+ blr
+#endif /* !defined(CONFIG_6xx) && !defined(CONFIG_POWER4) */
+
+
+/*
+ * Load stuff into the MMU. Intended to be called with
+ * IR=0 and DR=0.
+ */
+load_up_mmu:
+ sync /* Force all PTE updates to finish */
+ isync
+ tlbia /* Clear all TLB entries */
+ sync /* wait for tlbia/tlbie to finish */
+ TLBSYNC /* ... on all CPUs */
+ /* Load the SDR1 register (hash table base & size) */
+ lis r6,_SDR1@ha
+ tophys(r6,r6)
+ lwz r6,_SDR1@l(r6)
+ mtspr SPRN_SDR1,r6
+#ifdef CONFIG_PPC64BRIDGE
+ /* clear the ASR so we only use the pseudo-segment registers. */
+ li r6,0
+ mtasr r6
+#endif /* CONFIG_PPC64BRIDGE */
+ li r0,16 /* load up segment register values */
+ mtctr r0 /* for context 0 */
+ lis r3,0x2000 /* Ku = 1, VSID = 0 */
+ li r4,0
+3: mtsrin r3,r4
+ addi r3,r3,0x111 /* increment VSID */
+ addis r4,r4,0x1000 /* address of next segment */
+ bdnz 3b
+#ifndef CONFIG_POWER4
+/* Load the BAT registers with the values set up by MMU_init.
+ MMU_init takes care of whether we're on a 601 or not. */
+ mfpvr r3
+ srwi r3,r3,16
+ cmpwi r3,1
+ lis r3,BATS@ha
+ addi r3,r3,BATS@l
+ tophys(r3,r3)
+ LOAD_BAT(0,r3,r4,r5)
+ LOAD_BAT(1,r3,r4,r5)
+ LOAD_BAT(2,r3,r4,r5)
+ LOAD_BAT(3,r3,r4,r5)
+#endif /* CONFIG_POWER4 */
+ blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+ /* ptr to current */
+ lis r2,init_task@h
+ ori r2,r2,init_task@l
+ /* Set up for using our exception vectors */
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* init task's THREAD */
+ CLR_TOP32(r4)
+ mtspr SPRN_SPRG3,r4
+ li r3,0
+ mtspr SPRN_SPRG2,r3 /* 0 => not in RTAS */
+
+ /* stack */
+ lis r1,init_thread_union@ha
+ addi r1,r1,init_thread_union@l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+/*
+ * Do early bootinfo parsing, platform-specific initialization,
+ * and set up the MMU.
+ */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+ bl machine_init
+ bl MMU_init
+
+#ifdef CONFIG_APUS
+ /* Copy exception code to exception vector base on APUS. */
+ lis r4,KERNELBASE@h
+#ifdef CONFIG_APUS_FAST_EXCEPT
+ lis r3,0xfff0 /* Copy to 0xfff00000 */
+#else
+ lis r3,0 /* Copy to 0x00000000 */
+#endif
+ li r5,0x4000 /* # bytes of memory to copy */
+ li r6,0
+ bl copy_and_flush /* copy the first 0x4000 bytes */
+#endif /* CONFIG_APUS */
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * for SDR1 (hash table pointer) and the segment registers
+ * and change to using our exception vectors.
+ */
+ lis r4,2f@h
+ ori r4,r4,2f@l
+ tophys(r4,r4)
+ li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+ FIX_SRR1(r3,r5)
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ SYNC
+ RFI
+/* Load up the kernel context */
+2: bl load_up_mmu
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Add helper information for the Abatron bdiGDB debugger.
+ * We do this here because we know the mmu is disabled, and
+ * will be enabled for real in just a few instructions.
+ */
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r5, 0xf0(r0) /* This much match your Abatron config */
+ lis r6, swapper_pg_dir@h
+ ori r6, r6, swapper_pg_dir@l
+ tophys(r5, r5)
+ stw r6, 0(r5)
+#endif /* CONFIG_BDI_SWITCH */
+
+/* Now turn on the MMU for real! */
+ li r4,MSR_KERNEL
+ FIX_SRR1(r4,r5)
+ lis r3,start_kernel@h
+ ori r3,r3,start_kernel@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ SYNC
+ RFI
+
+/*
+ * Set up the segment registers for a new context.
+ */
+_GLOBAL(set_context)
+ mulli r3,r3,897 /* multiply context by skew factor */
+ rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
+ addis r3,r3,0x6000 /* Set Ks, Ku bits */
+ li r0,NUM_USER_SEGMENTS
+ mtctr r0
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is passed as second argument.
+ */
+ lis r5, KERNELBASE@h
+ lwz r5, 0xf0(r5)
+ stw r4, 0x4(r5)
+#endif
+ li r4,0
+ isync
+3:
+#ifdef CONFIG_PPC64BRIDGE
+ slbie r4
+#endif /* CONFIG_PPC64BRIDGE */
+ mtsrin r3,r4
+ addi r3,r3,0x111 /* next VSID */
+ rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
+ addis r4,r4,0x1000 /* address of next segment */
+ bdnz 3b
+ sync
+ isync
+ blr
+
+/*
+ * An undocumented "feature" of 604e requires that the v bit
+ * be cleared before changing BAT values.
+ *
+ * Also, newer IBM firmware does not clear bat3 and 4 so
+ * this makes sure it's done.
+ * -- Cort
+ */
+clear_bats:
+ li r10,0
+ mfspr r9,SPRN_PVR
+ rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
+ cmpwi r9, 1
+ beq 1f
+
+ mtspr SPRN_DBAT0U,r10
+ mtspr SPRN_DBAT0L,r10
+ mtspr SPRN_DBAT1U,r10
+ mtspr SPRN_DBAT1L,r10
+ mtspr SPRN_DBAT2U,r10
+ mtspr SPRN_DBAT2L,r10
+ mtspr SPRN_DBAT3U,r10
+ mtspr SPRN_DBAT3L,r10
+1:
+ mtspr SPRN_IBAT0U,r10
+ mtspr SPRN_IBAT0L,r10
+ mtspr SPRN_IBAT1U,r10
+ mtspr SPRN_IBAT1L,r10
+ mtspr SPRN_IBAT2U,r10
+ mtspr SPRN_IBAT2L,r10
+ mtspr SPRN_IBAT3U,r10
+ mtspr SPRN_IBAT3L,r10
+BEGIN_FTR_SECTION
+ /* Here's a tweak: at this point, CPU setup have
+ * not been called yet, so HIGH_BAT_EN may not be
+ * set in HID0 for the 745x processors. However, it
+ * seems that doesn't affect our ability to actually
+ * write to these SPRs.
+ */
+ mtspr SPRN_DBAT4U,r10
+ mtspr SPRN_DBAT4L,r10
+ mtspr SPRN_DBAT5U,r10
+ mtspr SPRN_DBAT5L,r10
+ mtspr SPRN_DBAT6U,r10
+ mtspr SPRN_DBAT6L,r10
+ mtspr SPRN_DBAT7U,r10
+ mtspr SPRN_DBAT7L,r10
+ mtspr SPRN_IBAT4U,r10
+ mtspr SPRN_IBAT4L,r10
+ mtspr SPRN_IBAT5U,r10
+ mtspr SPRN_IBAT5L,r10
+ mtspr SPRN_IBAT6U,r10
+ mtspr SPRN_IBAT6L,r10
+ mtspr SPRN_IBAT7U,r10
+ mtspr SPRN_IBAT7L,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+ blr
+
+flush_tlbs:
+ lis r10, 0x40
+1: addic. r10, r10, -0x1000
+ tlbie r10
+ blt 1b
+ sync
+ blr
+
+mmu_off:
+ addi r4, r3, __after_mmu_off - _start
+ mfmsr r3
+ andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
+ beqlr
+ andc r3,r3,r0
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ sync
+ RFI
+
+#ifndef CONFIG_POWER4
+/*
+ * Use the first pair of BAT registers to map the 1st 16MB
+ * of RAM to KERNELBASE. From this point on we can't safely
+ * call OF any more.
+ */
+initial_bats:
+ lis r11,KERNELBASE@h
+#ifndef CONFIG_PPC64BRIDGE
+ mfspr r9,SPRN_PVR
+ rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
+ cmpwi 0,r9,1
+ bne 4f
+ ori r11,r11,4 /* set up BAT registers for 601 */
+ li r8,0x7f /* valid, block length = 8MB */
+ oris r9,r11,0x800000@h /* set up BAT reg for 2nd 8M */
+ oris r10,r8,0x800000@h /* set up BAT reg for 2nd 8M */
+ mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
+ mtspr SPRN_IBAT0L,r8 /* lower BAT register */
+ mtspr SPRN_IBAT1U,r9
+ mtspr SPRN_IBAT1L,r10
+ isync
+ blr
+#endif /* CONFIG_PPC64BRIDGE */
+
+4: tophys(r8,r11)
+#ifdef CONFIG_SMP
+ ori r8,r8,0x12 /* R/W access, M=1 */
+#else
+ ori r8,r8,2 /* R/W access */
+#endif /* CONFIG_SMP */
+#ifdef CONFIG_APUS
+ ori r11,r11,BL_8M<<2|0x2 /* set up 8MB BAT registers for 604 */
+#else
+ ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
+#endif /* CONFIG_APUS */
+
+#ifdef CONFIG_PPC64BRIDGE
+ /* clear out the high 32 bits in the BAT */
+ clrldi r11,r11,32
+ clrldi r8,r8,32
+#endif /* CONFIG_PPC64BRIDGE */
+ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
+ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
+ mtspr SPRN_IBAT0L,r8
+ mtspr SPRN_IBAT0U,r11
+ isync
+ blr
+
+#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT)
+setup_disp_bat:
+ /*
+ * setup the display bat prepared for us in prom.c
+ */
+ mflr r8
+ bl reloc_offset
+ mtlr r8
+ addis r8,r3,disp_BAT@ha
+ addi r8,r8,disp_BAT@l
+ lwz r11,0(r8)
+ lwz r8,4(r8)
+ mfspr r9,SPRN_PVR
+ rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
+ cmpwi 0,r9,1
+ beq 1f
+ mtspr SPRN_DBAT3L,r8
+ mtspr SPRN_DBAT3U,r11
+ blr
+1: mtspr SPRN_IBAT3L,r8
+ mtspr SPRN_IBAT3U,r11
+ blr
+
+#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */
+
+#else /* CONFIG_POWER4 */
+/*
+ * Load up the SDR1 and segment register values now
+ * since we don't have the BATs.
+ * Also make sure we are running in 32-bit mode.
+ */
+
+initial_mm_power4:
+ addis r14,r3,_SDR1@ha /* get the value from _SDR1 */
+ lwz r14,_SDR1@l(r14) /* assume hash table below 4GB */
+ mtspr SPRN_SDR1,r14
+ slbia
+ lis r4,0x2000 /* set pseudo-segment reg 12 */
+ ori r5,r4,0x0ccc
+ mtsr 12,r5
+#if 0
+ ori r5,r4,0x0888 /* set pseudo-segment reg 8 */
+ mtsr 8,r5 /* (for access to serial port) */
+#endif
+#ifdef CONFIG_BOOTX_TEXT
+ ori r5,r4,0x0999 /* set pseudo-segment reg 9 */
+ mtsr 9,r5 /* (for access to screen) */
+#endif
+ mfmsr r0
+ clrldi r0,r0,1
+ sync
+ mtmsr r0
+ isync
+ blr
+
+#endif /* CONFIG_POWER4 */
+
+#ifdef CONFIG_8260
+/* Jump into the system reset for the rom.
+ * We first disable the MMU, and then jump to the ROM reset address.
+ *
+ * r3 is the board info structure, r4 is the location for starting.
+ * I use this for building a small kernel that can load other kernels,
+ * rather than trying to write or rely on a rom monitor that can tftp load.
+ */
+ .globl m8260_gorom
+m8260_gorom:
+ mfmsr r0
+ rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */
+ sync
+ mtmsr r0
+ sync
+ mfspr r11, SPRN_HID0
+ lis r10, 0
+ ori r10,r10,HID0_ICE|HID0_DCE
+ andc r11, r11, r10
+ mtspr SPRN_HID0, r11
+ isync
+ li r5, MSR_ME|MSR_RI
+ lis r6,2f@h
+ addis r6,r6,-KERNELBASE@h
+ ori r6,r6,2f@l
+ mtspr SPRN_SRR0,r6
+ mtspr SPRN_SRR1,r5
+ isync
+ sync
+ rfi
+2:
+ mtlr r4
+ blr
+#endif
+
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+ .data
+ .globl sdata
+sdata:
+ .globl empty_zero_page
+empty_zero_page:
+ .space 4096
+
+ .globl swapper_pg_dir
+swapper_pg_dir:
+ .space 4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+ .globl cmd_line
+cmd_line:
+ .space 512
+
+ .globl intercept_table
+intercept_table:
+ .long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
+ .long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
+ .long 0, 0, 0, i0x1300, 0, 0, 0, 0
+ .long 0, 0, 0, 0, 0, 0, 0, 0
+ .long 0, 0, 0, 0, 0, 0, 0, 0
+ .long 0, 0, 0, 0, 0, 0, 0, 0
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+ .space 8
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
new file mode 100644
index 0000000..599245b
--- /dev/null
+++ b/arch/powerpc/kernel/head_44x.S
@@ -0,0 +1,778 @@
+/*
+ * arch/ppc/kernel/head_44x.S
+ *
+ * Kernel execution entry point code.
+ *
+ * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ * Copyright 2002-2005 MontaVista Software, Inc.
+ * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/ibm44x.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include "head_booke.h"
+
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ * r4 - Starting address of the init RAM disk
+ * r5 - Ending address of the init RAM disk
+ * r6 - Start of kernel command line string (e.g. "mem=128")
+ * r7 - End of kernel command line string
+ *
+ */
+ .text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+ /*
+ * Reserve a word at a fixed location to store the address
+ * of abatron_pteptrs
+ */
+ nop
+/*
+ * Save parameters we are passed
+ */
+ mr r31,r3
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+ li r24,0 /* CPU number */
+
+/*
+ * Set up the initial MMU state
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from. We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ * determine which physical region we are located
+ * in. This can be used to determine where in RAM
+ * (on a shared CPU system) or PCI memory space
+ * (on a DRAMless system) we are located.
+ * For now, we assume a perfect world which means
+ * we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+ /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+ mfspr r3,SPRN_PID /* Get PID */
+ mfmsr r4 /* Get MSR */
+ andi. r4,r4,MSR_IS@l /* TS=1? */
+ beq wmmucr /* If not, leave STS=0 */
+ oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
+wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
+ sync
+
+ bl invstr /* Find our address */
+invstr: mflr r5 /* Make it accessible */
+ tlbsx r23,0,r5 /* Find entry we are in */
+ li r4,0 /* Start at TLB entry 0 */
+ li r3,0 /* Set PAGEID inval value */
+1: cmpw r23,r4 /* Is this our entry? */
+ beq skpinv /* If so, skip the inval */
+ tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
+skpinv: addi r4,r4,1 /* Increment */
+ cmpwi r4,64 /* Are we done? */
+ bne 1b /* If not, repeat */
+ isync /* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+ lis r3,KERNELBASE@h /* Load the kernel virtual address */
+ ori r3,r3,KERNELBASE@l
+
+ /* Kernel is at the base of RAM */
+ li r4, 0 /* Load the kernel physical address */
+
+ /* Load the kernel PID = 0 */
+ li r0,0
+ mtspr SPRN_PID,r0
+ sync
+
+ /* Initialize MMUCR */
+ li r5,0
+ mtspr SPRN_MMUCR,r5
+ sync
+
+ /* pageid fields */
+ clrrwi r3,r3,10 /* Mask off the effective page number */
+ ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+ /* xlat fields */
+ clrrwi r4,r4,10 /* Mask off the real page number */
+ /* ERPN is 0 for first 4GB page */
+
+ /* attrib fields */
+ /* Added guarded bit to protect against speculative loads/stores */
+ li r5,0
+ ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+ li r0,63 /* TLB slot 63 */
+
+ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
+ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
+ tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
+
+ /* Force context change */
+ mfmsr r0
+ mtspr SPRN_SRR1, r0
+ lis r0,3f@h
+ ori r0,r0,3f@l
+ mtspr SPRN_SRR0,r0
+ sync
+ rfi
+
+ /* If necessary, invalidate original entry we used */
+3: cmpwi r23,63
+ beq 4f
+ li r6,0
+ tlbwe r6,r23,PPC44x_TLB_PAGEID
+ isync
+
+4:
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /*
+ * Add temporary UART mapping for early debug.
+ * We can map UART registers wherever we want as long as they don't
+ * interfere with other system mappings (e.g. with pinned entries).
+ * For an example of how we handle this - see ocotea.h. --ebs
+ */
+ /* pageid fields */
+ lis r3,UART0_IO_BASE@h
+ ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
+
+ /* xlat fields */
+ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */
+#ifndef CONFIG_440EP
+ ori r4,r4,0x0001 /* ERPN is 1 for second 4GB page */
+#endif
+
+ /* attrib fields */
+ li r5,0
+ ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
+
+ li r0,0 /* TLB slot 0 */
+
+ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
+ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
+ tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
+
+ /* Force context change */
+ isync
+#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+
+ /* Establish the interrupt vector offsets */
+ SET_IVOR(0, CriticalInput);
+ SET_IVOR(1, MachineCheck);
+ SET_IVOR(2, DataStorage);
+ SET_IVOR(3, InstructionStorage);
+ SET_IVOR(4, ExternalInput);
+ SET_IVOR(5, Alignment);
+ SET_IVOR(6, Program);
+ SET_IVOR(7, FloatingPointUnavailable);
+ SET_IVOR(8, SystemCall);
+ SET_IVOR(9, AuxillaryProcessorUnavailable);
+ SET_IVOR(10, Decrementer);
+ SET_IVOR(11, FixedIntervalTimer);
+ SET_IVOR(12, WatchdogTimer);
+ SET_IVOR(13, DataTLBError);
+ SET_IVOR(14, InstructionTLBError);
+ SET_IVOR(15, Debug);
+
+ /* Establish the interrupt vector base */
+ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
+ mtspr SPRN_IVPR,r4
+
+#ifdef CONFIG_440EP
+ /* Clear DAPUIB flag in CCR0 (enable APU between CPU and FPU) */
+ mfspr r2,SPRN_CCR0
+ lis r3,0xffef
+ ori r3,r3,0xffff
+ and r2,r2,r3
+ mtspr SPRN_CCR0,r2
+ isync
+#endif
+
+ /*
+ * This is where the main kernel code starts.
+ */
+
+ /* ptr to current */
+ lis r2,init_task@h
+ ori r2,r2,init_task@l
+
+ /* ptr to current thread */
+ addi r4,r2,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG3,r4
+
+ /* stack */
+ lis r1,init_thread_union@h
+ ori r1,r1,init_thread_union@l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+ bl early_init
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+ bl machine_init
+ bl MMU_init
+
+ /* Setup PTE pointers for the Abatron bdiGDB */
+ lis r6, swapper_pg_dir@h
+ ori r6, r6, swapper_pg_dir@l
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ lis r4, KERNELBASE@h
+ ori r4, r4, KERNELBASE@l
+ stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
+ stw r6, 0(r5)
+
+ /* Let's move on */
+ lis r4,start_kernel@h
+ ori r4,r4,start_kernel@l
+ lis r3,MSR_KERNEL@h
+ ori r3,r3,MSR_KERNEL@l
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ rfi /* change context and jump to start_kernel */
+
+/*
+ * Interrupt vector entry code
+ *
+ * The Book E MMUs are always on so we don't need to handle
+ * interrupts in real mode as with previous PPC processors. In
+ * this case we handle interrupts in the kernel virtual address
+ * space.
+ *
+ * Interrupt vectors are dynamically placed relative to the
+ * interrupt prefix as determined by the address of interrupt_base.
+ * The interrupt vectors offsets are programmed using the labels
+ * for each interrupt vector entry.
+ *
+ * Interrupt vectors must be aligned on a 16 byte boundary.
+ * We align on a 32 byte cache line boundary for good measure.
+ */
+
+interrupt_base:
+ /* Critical Input Interrupt */
+ CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+
+ /* Machine Check Interrupt */
+#ifdef CONFIG_440A
+ MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+#else
+ CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+#endif
+
+ /* Data Storage Interrupt */
+ START_EXCEPTION(DataStorage)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
+ mfcr r11
+ mtspr SPRN_SPRG7W, r11
+
+ /*
+ * Check if it was a store fault, if not then bail
+ * because a user tried to access a kernel or
+ * read-protected page. Otherwise, get the
+ * offending address and handle it.
+ */
+ mfspr r10, SPRN_ESR
+ andis. r10, r10, ESR_ST@h
+ beq 2f
+
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+
+ mfspr r12,SPRN_MMUCR
+ rlwinm r12,r12,0,0,23 /* Clear TID */
+
+ b 4f
+
+ /* Get the PGD for the current thread */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+
+ /* Load PID into MMUCR TID */
+ mfspr r12,SPRN_MMUCR /* Get MMUCR */
+ mfspr r13,SPRN_PID /* Get PID */
+ rlwimi r12,r13,0,24,31 /* Set TID */
+
+4:
+ mtspr SPRN_MMUCR,r12
+
+ rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
+ lwzx r11, r12, r11 /* Get pgd/pmd entry */
+ rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
+ lwz r11, 4(r12) /* Get pte entry */
+
+ andi. r13, r11, _PAGE_RW /* Is it writeable? */
+ beq 2f /* Bail if not */
+
+ /* Update 'changed'.
+ */
+ ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ stw r11, 4(r12) /* Update Linux page table */
+
+ li r13, PPC44x_TLB_SR@l /* Set SR */
+ rlwimi r13, r11, 29, 29, 29 /* SX = _PAGE_HWEXEC */
+ rlwimi r13, r11, 0, 30, 30 /* SW = _PAGE_RW */
+ rlwimi r13, r11, 29, 28, 28 /* UR = _PAGE_USER */
+ rlwimi r12, r11, 31, 26, 26 /* (_PAGE_USER>>1)->r12 */
+ rlwimi r12, r11, 29, 30, 30 /* (_PAGE_USER>>3)->r12 */
+ and r12, r12, r11 /* HWEXEC/RW & USER */
+ rlwimi r13, r12, 0, 26, 26 /* UX = HWEXEC & USER */
+ rlwimi r13, r12, 3, 27, 27 /* UW = RW & USER */
+
+ rlwimi r11,r13,0,26,31 /* Insert static perms */
+
+ rlwinm r11,r11,0,20,15 /* Clear U0-U3 */
+
+ /* find the TLB index that caused the fault. It has to be here. */
+ tlbsx r10, 0, r10
+
+ tlbwe r11, r10, PPC44x_TLB_ATTRIB /* Write ATTRIB */
+
+ /* Done...restore registers and get out of here.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ rfi /* Force context change */
+
+2:
+ /*
+ * The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b data_access
+
+ /* Instruction Storage Interrupt */
+ INSTRUCTION_STORAGE_EXCEPTION
+
+ /* External Input Interrupt */
+ EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+
+ /* Alignment Interrupt */
+ ALIGNMENT_EXCEPTION
+
+ /* Program Interrupt */
+ PROGRAM_EXCEPTION
+
+ /* Floating Point Unavailable Interrupt */
+#ifdef CONFIG_PPC_FPU
+ FP_UNAVAILABLE_EXCEPTION
+#else
+ EXCEPTION(0x2010, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+#endif
+
+ /* System Call Interrupt */
+ START_EXCEPTION(SystemCall)
+ NORMAL_EXCEPTION_PROLOG
+ EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+
+ /* Auxillary Processor Unavailable Interrupt */
+ EXCEPTION(0x2020, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+
+ /* Decrementer Interrupt */
+ DECREMENTER_EXCEPTION
+
+ /* Fixed Internal Timer Interrupt */
+ /* TODO: Add FIT support */
+ EXCEPTION(0x1010, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+
+ /* Watchdog Timer Interrupt */
+ /* TODO: Add watchdog support */
+#ifdef CONFIG_BOOKE_WDT
+ CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
+#else
+ CRITICAL_EXCEPTION(0x1020, WatchdogTimer, UnknownException)
+#endif
+
+ /* Data TLB Error Interrupt */
+ START_EXCEPTION(DataTLBError)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
+ mfcr r11
+ mtspr SPRN_SPRG7W, r11
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+
+ mfspr r12,SPRN_MMUCR
+ rlwinm r12,r12,0,0,23 /* Clear TID */
+
+ b 4f
+
+ /* Get the PGD for the current thread */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+
+ /* Load PID into MMUCR TID */
+ mfspr r12,SPRN_MMUCR
+ mfspr r13,SPRN_PID /* Get PID */
+ rlwimi r12,r13,0,24,31 /* Set TID */
+
+4:
+ mtspr SPRN_MMUCR,r12
+
+ rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
+ lwzx r11, r12, r11 /* Get pgd/pmd entry */
+ rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
+ lwz r11, 4(r12) /* Get pte entry */
+ andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
+ beq 2f /* Bail if not present */
+
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, 4(r12)
+
+ /* Jump to common tlb load */
+ b finish_tlb_load
+
+2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b data_access
+
+ /* Instruction TLB Error Interrupt */
+ /*
+ * Nearly the same as above, except we get our
+ * information from different registers and bailout
+ * to a different point.
+ */
+ START_EXCEPTION(InstructionTLBError)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
+ mfcr r11
+ mtspr SPRN_SPRG7W, r11
+ mfspr r10, SPRN_SRR0 /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+
+ mfspr r12,SPRN_MMUCR
+ rlwinm r12,r12,0,0,23 /* Clear TID */
+
+ b 4f
+
+ /* Get the PGD for the current thread */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+
+ /* Load PID into MMUCR TID */
+ mfspr r12,SPRN_MMUCR
+ mfspr r13,SPRN_PID /* Get PID */
+ rlwimi r12,r13,0,24,31 /* Set TID */
+
+4:
+ mtspr SPRN_MMUCR,r12
+
+ rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
+ lwzx r11, r12, r11 /* Get pgd/pmd entry */
+ rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
+ lwz r11, 4(r12) /* Get pte entry */
+ andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
+ beq 2f /* Bail if not present */
+
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, 4(r12)
+
+ /* Jump to common TLB load point */
+ b finish_tlb_load
+
+2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b InstructionStorage
+
+ /* Debug Interrupt */
+ DEBUG_EXCEPTION
+
+/*
+ * Local functions
+ */
+ /*
+ * Data TLB exceptions will bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+data_access:
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
+ stw r5,_ESR(r11)
+ mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
+ EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+
+/*
+
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * r10 - EA of fault
+ * r11 - available to use
+ * r12 - Pointer to the 64-bit PTE
+ * r13 - available to use
+ * MMUCR - loaded with proper value when we get here
+ * Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load:
+ /*
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+
+ /* Load the next available TLB index */
+ lis r13, tlb_44x_index@ha
+ lwz r13, tlb_44x_index@l(r13)
+ /* Load the TLB high watermark */
+ lis r11, tlb_44x_hwater@ha
+ lwz r11, tlb_44x_hwater@l(r11)
+
+ /* Increment, rollover, and store TLB index */
+ addi r13, r13, 1
+ cmpw 0, r13, r11 /* reserve entries */
+ ble 7f
+ li r13, 0
+7:
+ /* Store the next available TLB index */
+ lis r11, tlb_44x_index@ha
+ stw r13, tlb_44x_index@l(r11)
+
+ lwz r11, 0(r12) /* Get MS word of PTE */
+ lwz r12, 4(r12) /* Get LS word of PTE */
+ rlwimi r11, r12, 0, 0 , 19 /* Insert RPN */
+ tlbwe r11, r13, PPC44x_TLB_XLAT /* Write XLAT */
+
+ /*
+ * Create PAGEID. This is the faulting address,
+ * page size, and valid flag.
+ */
+ li r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
+ rlwimi r10, r11, 0, 20, 31 /* Insert valid and page size */
+ tlbwe r10, r13, PPC44x_TLB_PAGEID /* Write PAGEID */
+
+ li r10, PPC44x_TLB_SR@l /* Set SR */
+ rlwimi r10, r12, 0, 30, 30 /* Set SW = _PAGE_RW */
+ rlwimi r10, r12, 29, 29, 29 /* SX = _PAGE_HWEXEC */
+ rlwimi r10, r12, 29, 28, 28 /* UR = _PAGE_USER */
+ rlwimi r11, r12, 31, 26, 26 /* (_PAGE_USER>>1)->r12 */
+ and r11, r12, r11 /* HWEXEC & USER */
+ rlwimi r10, r11, 0, 26, 26 /* UX = HWEXEC & USER */
+
+ rlwimi r12, r10, 0, 26, 31 /* Insert static perms */
+ rlwinm r12, r12, 0, 20, 15 /* Clear U0-U3 */
+ tlbwe r12, r13, PPC44x_TLB_ATTRIB /* Write ATTRIB */
+
+ /* Done...restore registers and get out of here.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ rfi /* Force context change */
+
+/*
+ * Global functions
+ */
+
+/*
+ * extern void giveup_altivec(struct task_struct *prev)
+ *
+ * The 44x core does not have an AltiVec unit.
+ */
+_GLOBAL(giveup_altivec)
+ blr
+
+/*
+ * extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The 44x core does not have an FPU.
+ */
+#ifndef CONFIG_PPC_FPU
+_GLOBAL(giveup_fpu)
+ blr
+#endif
+
+/*
+ * extern void abort(void)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(abort)
+ mfspr r13,SPRN_DBCR0
+ oris r13,r13,DBCR0_RST_SYSTEM@h
+ mtspr SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is the second parameter.
+ */
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r4, 0x4(r5)
+#endif
+ mtspr SPRN_PID,r3
+ isync /* Force context change */
+ blr
+
+/*
+ * We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+ .data
+_GLOBAL(sdata)
+_GLOBAL(empty_zero_page)
+ .space 4096
+
+/*
+ * To support >32-bit physical addresses, we use an 8KB pgdir.
+ */
+_GLOBAL(swapper_pg_dir)
+ .space 8192
+
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
+ .section .bss
+ .align 12
+exception_stack_bottom:
+ .space BOOKE_EXCEPTION_STACK_SIZE
+_GLOBAL(exception_stack_top)
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+_GLOBAL(cmd_line)
+ .space 512
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+ .space 8
+
+
diff --git a/arch/powerpc/kernel/head_4xx.S b/arch/powerpc/kernel/head_4xx.S
new file mode 100644
index 0000000..8562b80
--- /dev/null
+++ b/arch/powerpc/kernel/head_4xx.S
@@ -0,0 +1,1016 @@
+/*
+ * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ *
+ *
+ * Module name: head_4xx.S
+ *
+ * Description:
+ * Kernel execution entry point code.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/ibm4xx.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ * r4 - Starting address of the init RAM disk
+ * r5 - Ending address of the init RAM disk
+ * r6 - Start of kernel command line string (e.g. "mem=96m")
+ * r7 - End of kernel command line string
+ *
+ * This is all going to change RSN when we add bi_recs....... -- Dan
+ */
+ .text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+
+ /* Save parameters we are passed.
+ */
+ mr r31,r3
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+
+ /* We have to turn on the MMU right away so we get cache modes
+ * set correctly.
+ */
+ bl initial_mmu
+
+/* We now have the lower 16 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+turn_on_mmu:
+ lis r0,MSR_KERNEL@h
+ ori r0,r0,MSR_KERNEL@l
+ mtspr SPRN_SRR1,r0
+ lis r0,start_here@h
+ ori r0,r0,start_here@l
+ mtspr SPRN_SRR0,r0
+ SYNC
+ rfi /* enables MMU */
+ b . /* prevent prefetch past rfi */
+
+/*
+ * This area is used for temporarily saving registers during the
+ * critical exception prolog.
+ */
+ . = 0xc0
+crit_save:
+_GLOBAL(crit_r10)
+ .space 4
+_GLOBAL(crit_r11)
+ .space 4
+
+/*
+ * Exception vector entry code. This code runs with address translation
+ * turned off (i.e. using physical addresses). We assume SPRG3 has the
+ * physical address of the current task thread_struct.
+ * Note that we have to have decremented r1 before we write to any fields
+ * of the exception frame, since a critical interrupt could occur at any
+ * time, and it will write to the area immediately below the current r1.
+ */
+#define NORMAL_EXCEPTION_PROLOG \
+ mtspr SPRN_SPRG0,r10; /* save two registers to work with */\
+ mtspr SPRN_SPRG1,r11; \
+ mtspr SPRN_SPRG2,r1; \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_SRR1; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ beq 1f; \
+ mfspr r1,SPRN_SPRG3; /* if from user, start at top of */\
+ lwz r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack */\
+ addi r1,r1,THREAD_SIZE; \
+1: subi r1,r1,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ tophys(r11,r1); \
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mfspr r10,SPRN_SPRG0; \
+ stw r10,GPR10(r11); \
+ mfspr r12,SPRN_SPRG1; \
+ stw r12,GPR11(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r10,SPRN_SPRG2; \
+ mfspr r12,SPRN_SRR0; \
+ stw r10,GPR1(r11); \
+ mfspr r9,SPRN_SRR1; \
+ stw r10,0(r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Exception prolog for critical exceptions. This is a little different
+ * from the normal exception prolog above since a critical exception
+ * can potentially occur at any point during normal exception processing.
+ * Thus we cannot use the same SPRG registers as the normal prolog above.
+ * Instead we use a couple of words of memory at low physical addresses.
+ * This is OK since we don't support SMP on these processors.
+ */
+#define CRITICAL_EXCEPTION_PROLOG \
+ stw r10,crit_r10@l(0); /* save two registers to work with */\
+ stw r11,crit_r11@l(0); \
+ mfcr r10; /* save CR in r10 for now */\
+ mfspr r11,SPRN_SRR3; /* check whether user or kernel */\
+ andi. r11,r11,MSR_PR; \
+ lis r11,critical_stack_top@h; \
+ ori r11,r11,critical_stack_top@l; \
+ beq 1f; \
+ /* COMING FROM USER MODE */ \
+ mfspr r11,SPRN_SPRG3; /* if from user, start at top of */\
+ lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
+ addi r11,r11,THREAD_SIZE; \
+1: subi r11,r11,INT_FRAME_SIZE; /* Allocate an exception frame */\
+ tophys(r11,r11); \
+ stw r10,_CCR(r11); /* save various registers */\
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
+ stw r12,_DEAR(r11); /* since they may have had stuff */\
+ mfspr r9,SPRN_ESR; /* in them at the point where the */\
+ stw r9,_ESR(r11); /* exception was taken */\
+ mfspr r12,SPRN_SRR2; \
+ stw r1,GPR1(r11); \
+ mfspr r9,SPRN_SRR3; \
+ stw r1,0(r11); \
+ tovirt(r1,r11); \
+ rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+ /*
+ * State at this point:
+ * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
+ * r10 saved in crit_r10 and in stack frame, trashed
+ * r11 saved in crit_r11 and in stack frame,
+ * now phys stack/exception frame pointer
+ * r12 saved in stack frame, now saved SRR2
+ * CR saved in stack frame, CR0.EQ = !SRR3.PR
+ * LR, DEAR, ESR in stack frame
+ * r1 saved in stack frame, now virt stack/excframe pointer
+ * r0, r3-r8 saved in stack frame
+ */
+
+/*
+ * Exception vectors.
+ */
+#define START_EXCEPTION(n, label) \
+ . = n; \
+label:
+
+#define EXCEPTION(n, label, hdlr, xfer) \
+ START_EXCEPTION(n, label); \
+ NORMAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define CRITICAL_EXCEPTION(n, label, hdlr) \
+ START_EXCEPTION(n, label); \
+ CRITICAL_EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, crit_transfer_to_handler, \
+ ret_from_crit_exc)
+
+#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,TRAP(r11); \
+ lis r10,msr@h; \
+ ori r10,r10,msr@l; \
+ copyee(r10, r9); \
+ bl tfer; \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+
+/*
+ * 0x0100 - Critical Interrupt Exception
+ */
+ CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, UnknownException)
+
+/*
+ * 0x0200 - Machine Check Exception
+ */
+ CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+
+/*
+ * 0x0300 - Data Storage Exception
+ * This happens for just a few reasons. U0 set (but we don't do that),
+ * or zone protection fault (user violation, write to protected page).
+ * If this is just an update of modified status, we do that quickly
+ * and exit. Otherwise, we call heavywight functions to do the work.
+ */
+ START_EXCEPTION(0x0300, DataStorage)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+ stw r12, 0(r0)
+ stw r9, 4(r0)
+ mfcr r11
+ mfspr r12, SPRN_PID
+ stw r11, 8(r0)
+ stw r12, 12(r0)
+#else
+ mtspr SPRN_SPRG4, r12
+ mtspr SPRN_SPRG5, r9
+ mfcr r11
+ mfspr r12, SPRN_PID
+ mtspr SPRN_SPRG7, r11
+ mtspr SPRN_SPRG6, r12
+#endif
+
+ /* First, check if it was a zone fault (which means a user
+ * tried to access a kernel or read-protected page - always
+ * a SEGV). All other faults here must be stores, so no
+ * need to check ESR_DST as well. */
+ mfspr r10, SPRN_ESR
+ andis. r10, r10, ESR_DIZ@h
+ bne 2f
+
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+ li r9, 0
+ mtspr SPRN_PID, r9 /* TLB will have 0 TID */
+ b 4f
+
+ /* Get the PGD for the current thread.
+ */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ tophys(r11, r11)
+ rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
+ lwz r11, 0(r11) /* Get L1 entry */
+ rlwinm. r12, r11, 0, 0, 19 /* Extract L2 (pte) base address */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r12) /* Get Linux PTE */
+
+ andi. r9, r11, _PAGE_RW /* Is it writeable? */
+ beq 2f /* Bail if not */
+
+ /* Update 'changed'.
+ */
+ ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ stw r11, 0(r12) /* Update Linux page table */
+
+ /* Most of the Linux PTE is ready to load into the TLB LO.
+ * We set ZSEL, where only the LS-bit determines user access.
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * If shared is set, we cause a zero PID->TID load.
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+ li r12, 0x0ce2
+ andc r11, r11, r12 /* Make sure 20, 21 are zero */
+
+ /* find the TLB index that caused the fault. It has to be here.
+ */
+ tlbsx r9, 0, r10
+
+ tlbwe r11, r9, TLB_DATA /* Load TLB LO */
+
+ /* Done...restore registers and get out of here.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ PPC405_ERR77_SYNC
+ rfi /* Should sync shadow TLBs */
+ b . /* prevent prefetch past rfi */
+
+2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b DataAccess
+
+/*
+ * 0x0400 - Instruction Storage Exception
+ * This is caused by a fetch from non-execute or guarded pages.
+ */
+ START_EXCEPTION(0x0400, InstructionAccess)
+ NORMAL_EXCEPTION_PROLOG
+ mr r4,r12 /* Pass SRR0 as arg2 */
+ li r5,0 /* Pass zero as arg3 */
+ EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* 0x0500 - External Interrupt Exception */
+ EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* 0x0600 - Alignment Exception */
+ START_EXCEPTION(0x0600, Alignment)
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r4,SPRN_DEAR /* Grab the DEAR and save it */
+ stw r4,_DEAR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE(0x600, AlignmentException)
+
+/* 0x0700 - Program Exception */
+ START_EXCEPTION(0x0700, ProgramCheck)
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r4,SPRN_ESR /* Grab the ESR and save it */
+ stw r4,_ESR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_STD(0x700, ProgramCheckException)
+
+ EXCEPTION(0x0800, Trap_08, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x0900, Trap_09, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x0A00, Trap_0A, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x0B00, Trap_0B, UnknownException, EXC_XFER_EE)
+
+/* 0x0C00 - System Call Exception */
+ START_EXCEPTION(0x0C00, SystemCall)
+ NORMAL_EXCEPTION_PROLOG
+ EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+ EXCEPTION(0x0D00, Trap_0D, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x0E00, Trap_0E, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x0F00, Trap_0F, UnknownException, EXC_XFER_EE)
+
+/* 0x1000 - Programmable Interval Timer (PIT) Exception */
+ START_EXCEPTION(0x1000, Decrementer)
+ NORMAL_EXCEPTION_PROLOG
+ lis r0,TSR_PIS@h
+ mtspr SPRN_TSR,r0 /* Clear the PIT exception */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_LITE(0x1000, timer_interrupt)
+
+#if 0
+/* NOTE:
+ * FIT and WDT handlers are not implemented yet.
+ */
+
+/* 0x1010 - Fixed Interval Timer (FIT) Exception
+*/
+ STND_EXCEPTION(0x1010, FITException, UnknownException)
+
+/* 0x1020 - Watchdog Timer (WDT) Exception
+*/
+#ifdef CONFIG_BOOKE_WDT
+ CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
+#else
+ CRITICAL_EXCEPTION(0x1020, WDTException, UnknownException)
+#endif
+#endif
+
+/* 0x1100 - Data TLB Miss Exception
+ * As the name implies, translation is not in the MMU, so search the
+ * page tables and fix it. The only purpose of this function is to
+ * load TLB entries from the page table if they exist.
+ */
+ START_EXCEPTION(0x1100, DTLBMiss)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+ stw r12, 0(r0)
+ stw r9, 4(r0)
+ mfcr r11
+ mfspr r12, SPRN_PID
+ stw r11, 8(r0)
+ stw r12, 12(r0)
+#else
+ mtspr SPRN_SPRG4, r12
+ mtspr SPRN_SPRG5, r9
+ mfcr r11
+ mfspr r12, SPRN_PID
+ mtspr SPRN_SPRG7, r11
+ mtspr SPRN_SPRG6, r12
+#endif
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+ li r9, 0
+ mtspr SPRN_PID, r9 /* TLB will have 0 TID */
+ b 4f
+
+ /* Get the PGD for the current thread.
+ */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ tophys(r11, r11)
+ rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
+ lwz r12, 0(r11) /* Get L1 entry */
+ andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r12) /* Get Linux PTE */
+ andi. r9, r11, _PAGE_PRESENT
+ beq 5f
+
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, 0(r12)
+
+ /* Create TLB tag. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0.
+ */
+ li r12, 0x00c0
+ rlwimi r10, r12, 0, 20, 31
+
+ b finish_tlb_load
+
+2: /* Check for possible large-page pmd entry */
+ rlwinm. r9, r12, 2, 22, 24
+ beq 5f
+
+ /* Create TLB tag. This is the faulting address, plus a static
+ * set of bits (valid, E, U0) plus the size from the PMD.
+ */
+ ori r9, r9, 0x40
+ rlwimi r10, r9, 0, 20, 31
+ mr r11, r12
+
+ b finish_tlb_load
+
+5:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b DataAccess
+
+/* 0x1200 - Instruction TLB Miss Exception
+ * Nearly the same as above, except we get our information from different
+ * registers and bailout to a different point.
+ */
+ START_EXCEPTION(0x1200, ITLBMiss)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+#ifdef CONFIG_403GCX
+ stw r12, 0(r0)
+ stw r9, 4(r0)
+ mfcr r11
+ mfspr r12, SPRN_PID
+ stw r11, 8(r0)
+ stw r12, 12(r0)
+#else
+ mtspr SPRN_SPRG4, r12
+ mtspr SPRN_SPRG5, r9
+ mfcr r11
+ mfspr r12, SPRN_PID
+ mtspr SPRN_SPRG7, r11
+ mtspr SPRN_SPRG6, r12
+#endif
+ mfspr r10, SPRN_SRR0 /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ cmplw r10, r11
+ blt+ 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+ li r9, 0
+ mtspr SPRN_PID, r9 /* TLB will have 0 TID */
+ b 4f
+
+ /* Get the PGD for the current thread.
+ */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ tophys(r11, r11)
+ rlwimi r11, r10, 12, 20, 29 /* Create L1 (pgdir/pmd) address */
+ lwz r12, 0(r11) /* Get L1 entry */
+ andi. r9, r12, _PMD_PRESENT /* Check if it points to a PTE page */
+ beq 2f /* Bail if no table */
+
+ rlwimi r12, r10, 22, 20, 29 /* Compute PTE address */
+ lwz r11, 0(r12) /* Get Linux PTE */
+ andi. r9, r11, _PAGE_PRESENT
+ beq 5f
+
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, 0(r12)
+
+ /* Create TLB tag. This is the faulting address plus a static
+ * set of bits. These are size, valid, E, U0.
+ */
+ li r12, 0x00c0
+ rlwimi r10, r12, 0, 20, 31
+
+ b finish_tlb_load
+
+2: /* Check for possible large-page pmd entry */
+ rlwinm. r9, r12, 2, 22, 24
+ beq 5f
+
+ /* Create TLB tag. This is the faulting address, plus a static
+ * set of bits (valid, E, U0) plus the size from the PMD.
+ */
+ ori r9, r9, 0x40
+ rlwimi r10, r9, 0, 20, 31
+ mr r11, r12
+
+ b finish_tlb_load
+
+5:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b InstructionAccess
+
+ EXCEPTION(0x1300, Trap_13, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1400, Trap_14, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+#ifdef CONFIG_IBM405_ERR51
+ /* 405GP errata 51 */
+ START_EXCEPTION(0x1700, Trap_17)
+ b DTLBMiss
+#else
+ EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
+#endif
+ EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1A00, Trap_1A, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1B00, Trap_1B, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1C00, Trap_1C, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1D00, Trap_1D, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1E00, Trap_1E, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1F00, Trap_1F, UnknownException, EXC_XFER_EE)
+
+/* Check for a single step debug exception while in an exception
+ * handler before state has been saved. This is to catch the case
+ * where an instruction that we are trying to single step causes
+ * an exception (eg ITLB/DTLB miss) and thus the first instruction of
+ * the exception handler generates a single step debug exception.
+ *
+ * If we get a debug trap on the first instruction of an exception handler,
+ * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
+ * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
+ * The exception handler was handling a non-critical interrupt, so it will
+ * save (and later restore) the MSR via SPRN_SRR1, which will still have
+ * the MSR_DE bit set.
+ */
+ /* 0x2000 - Debug Exception */
+ START_EXCEPTION(0x2000, DebugTrap)
+ CRITICAL_EXCEPTION_PROLOG
+
+ /*
+ * If this is a single step or branch-taken exception in an
+ * exception entry sequence, it was probably meant to apply to
+ * the code where the exception occurred (since exception entry
+ * doesn't turn off DE automatically). We simulate the effect
+ * of turning off DE on entry to an exception handler by turning
+ * off DE in the SRR3 value and clearing the debug status.
+ */
+ mfspr r10,SPRN_DBSR /* check single-step/branch taken */
+ andis. r10,r10,DBSR_IC@h
+ beq+ 2f
+
+ andi. r10,r9,MSR_IR|MSR_PR /* check supervisor + MMU off */
+ beq 1f /* branch and fix it up */
+
+ mfspr r10,SPRN_SRR2 /* Faulting instruction address */
+ cmplwi r10,0x2100
+ bgt+ 2f /* address above exception vectors */
+
+ /* here it looks like we got an inappropriate debug exception. */
+1: rlwinm r9,r9,0,~MSR_DE /* clear DE in the SRR3 value */
+ lis r10,DBSR_IC@h /* clear the IC event */
+ mtspr SPRN_DBSR,r10
+ /* restore state and get out */
+ lwz r10,_CCR(r11)
+ lwz r0,GPR0(r11)
+ lwz r1,GPR1(r11)
+ mtcrf 0x80,r10
+ mtspr SPRN_SRR2,r12
+ mtspr SPRN_SRR3,r9
+ lwz r9,GPR9(r11)
+ lwz r12,GPR12(r11)
+ lwz r10,crit_r10@l(0)
+ lwz r11,crit_r11@l(0)
+ PPC405_ERR77_SYNC
+ rfci
+ b .
+
+ /* continue normal handling for a critical exception... */
+2: mfspr r4,SPRN_DBSR
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_TEMPLATE(DebugException, 0x2002, \
+ (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
+ NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
+
+/*
+ * The other Data TLB exceptions bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+DataAccess:
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
+ stw r5,_ESR(r11)
+ mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
+ EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Other PowerPC processors, namely those derived from the 6xx-series
+ * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
+ * However, for the 4xx-series processors these are neither defined nor
+ * reserved.
+ */
+
+ /* Damn, I came up one instruction too many to fit into the
+ * exception space :-). Both the instruction and data TLB
+ * miss get to this point to load the TLB.
+ * r10 - TLB_TAG value
+ * r11 - Linux PTE
+ * r12, r9 - avilable to use
+ * PID - loaded with proper value when we get here
+ * Upon exit, we reload everything and RFI.
+ * Actually, it will fit now, but oh well.....a common place
+ * to load the TLB.
+ */
+tlb_4xx_index:
+ .long 0
+finish_tlb_load:
+ /* load the next available TLB index.
+ */
+ lwz r9, tlb_4xx_index@l(0)
+ addi r9, r9, 1
+ andi. r9, r9, (PPC4XX_TLB_SIZE-1)
+ stw r9, tlb_4xx_index@l(0)
+
+6:
+ /*
+ * Clear out the software-only bits in the PTE to generate the
+ * TLB_DATA value. These are the bottom 2 bits of the RPM, the
+ * top 3 bits of the zone field, and M.
+ */
+ li r12, 0x0ce2
+ andc r11, r11, r12
+
+ tlbwe r11, r9, TLB_DATA /* Load TLB LO */
+ tlbwe r10, r9, TLB_TAG /* Load TLB HI */
+
+ /* Done...restore registers and get out of here.
+ */
+#ifdef CONFIG_403GCX
+ lwz r12, 12(r0)
+ lwz r11, 8(r0)
+ mtspr SPRN_PID, r12
+ mtcr r11
+ lwz r9, 4(r0)
+ lwz r12, 0(r0)
+#else
+ mfspr r12, SPRN_SPRG6
+ mfspr r11, SPRN_SPRG7
+ mtspr SPRN_PID, r12
+ mtcr r11
+ mfspr r9, SPRN_SPRG5
+ mfspr r12, SPRN_SPRG4
+#endif
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ PPC405_ERR77_SYNC
+ rfi /* Should sync shadow TLBs */
+ b . /* prevent prefetch past rfi */
+
+/* extern void giveup_fpu(struct task_struct *prev)
+ *
+ * The PowerPC 4xx family of processors do not have an FPU, so this just
+ * returns.
+ */
+_GLOBAL(giveup_fpu)
+ blr
+
+/* This is where the main kernel code starts.
+ */
+start_here:
+
+ /* ptr to current */
+ lis r2,init_task@h
+ ori r2,r2,init_task@l
+
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG3,r4
+
+ /* stack */
+ lis r1,init_thread_union@ha
+ addi r1,r1,init_thread_union@l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+ bl early_init /* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+ bl machine_init
+ bl MMU_init
+
+/* Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 4xx, all we have to do is invalidate the TLB to clear
+ * the old 16M byte TLB mappings.
+ */
+ lis r4,2f@h
+ ori r4,r4,2f@l
+ tophys(r4,r4)
+ lis r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
+ ori r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ rfi
+ b . /* prevent prefetch past rfi */
+
+/* Load up the kernel context */
+2:
+ sync /* Flush to memory before changing TLB */
+ tlbia
+ isync /* Flush shadow TLBs */
+
+ /* set up the PTE pointers for the Abatron bdiGDB.
+ */
+ lis r6, swapper_pg_dir@h
+ ori r6, r6, swapper_pg_dir@l
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r5, 0xf0(r0) /* Must match your Abatron config file */
+ tophys(r5,r5)
+ stw r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+ lis r4,MSR_KERNEL@h
+ ori r4,r4,MSR_KERNEL@l
+ lis r3,start_kernel@h
+ ori r3,r3,start_kernel@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ rfi /* enable MMU and jump to start_kernel */
+ b . /* prevent prefetch past rfi */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization. This maps the first 16 MBytes of memory 1:1
+ * virtual to physical and more importantly sets the cache mode.
+ */
+initial_mmu:
+ tlbia /* Invalidate all TLB entries */
+ isync
+
+ /* We should still be executing code at physical address 0x0000xxxx
+ * at this point. However, start_here is at virtual address
+ * 0xC000xxxx. So, set up a TLB mapping to cover this once
+ * translation is enabled.
+ */
+
+ lis r3,KERNELBASE@h /* Load the kernel virtual address */
+ ori r3,r3,KERNELBASE@l
+ tophys(r4,r3) /* Load the kernel physical address */
+
+ iccci r0,r3 /* Invalidate the i-cache before use */
+
+ /* Load the kernel PID.
+ */
+ li r0,0
+ mtspr SPRN_PID,r0
+ sync
+
+ /* Configure and load two entries into TLB slots 62 and 63.
+ * In case we are pinning TLBs, these are reserved in by the
+ * other TLB functions. If not reserving, then it doesn't
+ * matter where they are loaded.
+ */
+ clrrwi r4,r4,10 /* Mask off the real page number */
+ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */
+
+ clrrwi r3,r3,10 /* Mask off the effective page number */
+ ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
+
+ li r0,63 /* TLB slot 63 */
+
+ tlbwe r4,r0,TLB_DATA /* Load the data portion of the entry */
+ tlbwe r3,r0,TLB_TAG /* Load the tag portion of the entry */
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
+
+ /* Load a TLB entry for the UART, so that ppc4xx_progress() can use
+ * the UARTs nice and early. We use a 4k real==virtual mapping. */
+
+ lis r3,SERIAL_DEBUG_IO_BASE@h
+ ori r3,r3,SERIAL_DEBUG_IO_BASE@l
+ mr r4,r3
+ clrrwi r4,r4,12
+ ori r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
+
+ clrrwi r3,r3,12
+ ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
+
+ li r0,0 /* TLB slot 0 */
+ tlbwe r4,r0,TLB_DATA
+ tlbwe r3,r0,TLB_TAG
+#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
+
+ isync
+
+ /* Establish the exception vector base
+ */
+ lis r4,KERNELBASE@h /* EVPR only uses the high 16-bits */
+ tophys(r0,r4) /* Use the physical address */
+ mtspr SPRN_EVPR,r0
+
+ blr
+
+_GLOBAL(abort)
+ mfspr r13,SPRN_DBCR0
+ oris r13,r13,DBCR0_RST_SYSTEM@h
+ mtspr SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is the second parameter.
+ */
+ lis r5, KERNELBASE@h
+ lwz r5, 0xf0(r5)
+ stw r4, 0x4(r5)
+#endif
+ sync
+ mtspr SPRN_PID,r3
+ isync /* Need an isync to flush shadow */
+ /* TLBs after changing PID */
+ blr
+
+/* We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+ .data
+_GLOBAL(sdata)
+_GLOBAL(empty_zero_page)
+ .space 4096
+_GLOBAL(swapper_pg_dir)
+ .space 4096
+
+
+/* Stack for handling critical exceptions from kernel mode */
+ .section .bss
+ .align 12
+exception_stack_bottom:
+ .space 4096
+critical_stack_top:
+_GLOBAL(exception_stack_top)
+
+/* This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+_GLOBAL(cmd_line)
+ .space 512
+
+/* Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+ .space 8
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
new file mode 100644
index 0000000..22a5ee0
--- /dev/null
+++ b/arch/powerpc/kernel/head_64.S
@@ -0,0 +1,2011 @@
+/*
+ * arch/ppc64/kernel/head.S
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Adapted for Power Macintosh by Paul Mackerras.
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ * This file contains the low-level support and setup for the
+ * PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/systemcfg.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/bug.h>
+#include <asm/cputable.h>
+#include <asm/setup.h>
+#include <asm/hvcall.h>
+#include <asm/iSeries/LparMap.h>
+
+#ifdef CONFIG_PPC_ISERIES
+#define DO_SOFT_DISABLE
+#endif
+
+/*
+ * We layout physical memory as follows:
+ * 0x0000 - 0x00ff : Secondary processor spin code
+ * 0x0100 - 0x2fff : pSeries Interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x6000 - 0x6fff : Initial (CPU0) segment table
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 - : Early init and support code
+ */
+
+/*
+ * SPRG Usage
+ *
+ * Register Definition
+ *
+ * SPRG0 reserved for hypervisor
+ * SPRG1 temp - used to save gpr
+ * SPRG2 temp - used to save gpr
+ * SPRG3 virt addr of paca
+ */
+
+/*
+ * Entering into this code we make the following assumptions:
+ * For pSeries:
+ * 1. The MMU is off & open firmware is running in real mode.
+ * 2. The kernel is entered at __start
+ *
+ * For iSeries:
+ * 1. The MMU is on (as it always is for iSeries)
+ * 2. The kernel is entered at system_reset_iSeries
+ */
+
+ .text
+ .globl _stext
+_stext:
+#ifdef CONFIG_PPC_MULTIPLATFORM
+_GLOBAL(__start)
+ /* NOP this out unconditionally */
+BEGIN_FTR_SECTION
+ b .__start_initialization_multiplatform
+END_FTR_SECTION(0, 1)
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+ /* Catch branch to 0 in real mode */
+ trap
+
+#ifdef CONFIG_PPC_ISERIES
+ /*
+ * At offset 0x20, there is a pointer to iSeries LPAR data.
+ * This is required by the hypervisor
+ */
+ . = 0x20
+ .llong hvReleaseData-KERNELBASE
+
+ /*
+ * At offset 0x28 and 0x30 are offsets to the mschunks_map
+ * array (used by the iSeries LPAR debugger to do translation
+ * between physical addresses and absolute addresses) and
+ * to the pidhash table (also used by the debugger)
+ */
+ .llong mschunks_map-KERNELBASE
+ .llong 0 /* pidhash-KERNELBASE SFRXXX */
+
+ /* Offset 0x38 - Pointer to start of embedded System.map */
+ .globl embedded_sysmap_start
+embedded_sysmap_start:
+ .llong 0
+ /* Offset 0x40 - Pointer to end of embedded System.map */
+ .globl embedded_sysmap_end
+embedded_sysmap_end:
+ .llong 0
+
+#endif /* CONFIG_PPC_ISERIES */
+
+ /* Secondary processors spin on this value until it goes to 1. */
+ .globl __secondary_hold_spinloop
+__secondary_hold_spinloop:
+ .llong 0x0
+
+ /* Secondary processors write this value with their cpu # */
+ /* after they enter the spin loop immediately below. */
+ .globl __secondary_hold_acknowledge
+__secondary_hold_acknowledge:
+ .llong 0x0
+
+ . = 0x60
+/*
+ * The following code is used on pSeries to hold secondary processors
+ * in a spin loop after they have been freed from OpenFirmware, but
+ * before the bulk of the kernel has been relocated. This code
+ * is relocated to physical address 0x60 before prom_init is run.
+ * All of it must fit below the first exception vector at 0x100.
+ */
+_GLOBAL(__secondary_hold)
+ mfmsr r24
+ ori r24,r24,MSR_RI
+ mtmsrd r24 /* RI on */
+
+ /* Grab our linux cpu number */
+ mr r24,r3
+
+ /* Tell the master cpu we're here */
+ /* Relocation is off & we are located at an address less */
+ /* than 0x100, so only need to grab low order offset. */
+ std r24,__secondary_hold_acknowledge@l(0)
+ sync
+
+ /* All secondary cpus wait here until told to start. */
+100: ld r4,__secondary_hold_spinloop@l(0)
+ cmpdi 0,r4,1
+ bne 100b
+
+#ifdef CONFIG_HMT
+ b .hmt_init
+#else
+#ifdef CONFIG_SMP
+ mr r3,r24
+ b .pSeries_secondary_smp_init
+#else
+ BUG_OPCODE
+#endif
+#endif
+
+/* This value is used to mark exception frames on the stack. */
+ .section ".toc","aw"
+exception_marker:
+ .tc ID_72656773_68657265[TC],0x7265677368657265
+ .text
+
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers. They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ * LOL. One day... - paulus
+ */
+
+/*
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+/*
+ * This is the start of the interrupt handlers for pSeries
+ * This code runs with relocation off.
+ */
+#define EX_R9 0
+#define EX_R10 8
+#define EX_R11 16
+#define EX_R12 24
+#define EX_R13 32
+#define EX_SRR0 40
+#define EX_R3 40 /* SLB miss saves R3, but not SRR0 */
+#define EX_DAR 48
+#define EX_LR 48 /* SLB miss saves LR, but not DAR */
+#define EX_DSISR 56
+#define EX_CCR 60
+
+#define EXCEPTION_PROLOG_PSERIES(area, label) \
+ mfspr r13,SPRG3; /* get paca address into r13 */ \
+ std r9,area+EX_R9(r13); /* save r9 - r12 */ \
+ std r10,area+EX_R10(r13); \
+ std r11,area+EX_R11(r13); \
+ std r12,area+EX_R12(r13); \
+ mfspr r9,SPRG1; \
+ std r9,area+EX_R13(r13); \
+ mfcr r9; \
+ clrrdi r12,r13,32; /* get high part of &label */ \
+ mfmsr r10; \
+ mfspr r11,SRR0; /* save SRR0 */ \
+ ori r12,r12,(label)@l; /* virt addr of handler */ \
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \
+ mtspr SRR0,r12; \
+ mfspr r12,SRR1; /* and SRR1 */ \
+ mtspr SRR1,r10; \
+ rfid; \
+ b . /* prevent speculative execution */
+
+/*
+ * This is the start of the interrupt handlers for iSeries
+ * This code runs with relocation on.
+ */
+#define EXCEPTION_PROLOG_ISERIES_1(area) \
+ mfspr r13,SPRG3; /* get paca address into r13 */ \
+ std r9,area+EX_R9(r13); /* save r9 - r12 */ \
+ std r10,area+EX_R10(r13); \
+ std r11,area+EX_R11(r13); \
+ std r12,area+EX_R12(r13); \
+ mfspr r9,SPRG1; \
+ std r9,area+EX_R13(r13); \
+ mfcr r9
+
+#define EXCEPTION_PROLOG_ISERIES_2 \
+ mfmsr r10; \
+ ld r11,PACALPPACA+LPPACASRR0(r13); \
+ ld r12,PACALPPACA+LPPACASRR1(r13); \
+ ori r10,r10,MSR_RI; \
+ mtmsrd r10,1
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address. We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area) \
+ andi. r10,r12,MSR_PR; /* See if coming from user */ \
+ mr r10,r1; /* Save r1 */ \
+ subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
+ beq- 1f; \
+ ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
+1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \
+ bge- cr1,bad_stack; /* abort if it is */ \
+ std r9,_CCR(r1); /* save CR in stackframe */ \
+ std r11,_NIP(r1); /* save SRR0 in stackframe */ \
+ std r12,_MSR(r1); /* save SRR1 in stackframe */ \
+ std r10,0(r1); /* make stack chain pointer */ \
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r10,GPR1(r1); /* save r1 in stackframe */ \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
+ ld r10,area+EX_R10(r13); \
+ std r9,GPR9(r1); \
+ std r10,GPR10(r1); \
+ ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
+ ld r10,area+EX_R12(r13); \
+ ld r11,area+EX_R13(r13); \
+ std r9,GPR11(r1); \
+ std r10,GPR12(r1); \
+ std r11,GPR13(r1); \
+ ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
+ mflr r9; /* save LR in stackframe */ \
+ std r9,_LINK(r1); \
+ mfctr r10; /* save CTR in stackframe */ \
+ std r10,_CTR(r1); \
+ mfspr r11,XER; /* save XER in stackframe */ \
+ std r11,_XER(r1); \
+ li r9,(n)+1; \
+ std r9,_TRAP(r1); /* set trap number */ \
+ li r10,0; \
+ ld r11,exception_marker@toc(r2); \
+ std r10,RESULT(r1); /* clear regs->result */ \
+ std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label) \
+ . = n; \
+ .globl label##_pSeries; \
+label##_pSeries: \
+ HMT_MEDIUM; \
+ mtspr SPRG1,r13; /* save r13 */ \
+ RUNLATCH_ON(r13); \
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define STD_EXCEPTION_ISERIES(n, label, area) \
+ .globl label##_iSeries; \
+label##_iSeries: \
+ HMT_MEDIUM; \
+ mtspr SPRG1,r13; /* save r13 */ \
+ RUNLATCH_ON(r13); \
+ EXCEPTION_PROLOG_ISERIES_1(area); \
+ EXCEPTION_PROLOG_ISERIES_2; \
+ b label##_common
+
+#define MASKABLE_EXCEPTION_ISERIES(n, label) \
+ .globl label##_iSeries; \
+label##_iSeries: \
+ HMT_MEDIUM; \
+ mtspr SPRG1,r13; /* save r13 */ \
+ RUNLATCH_ON(r13); \
+ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \
+ lbz r10,PACAPROCENABLED(r13); \
+ cmpwi 0,r10,0; \
+ beq- label##_iSeries_masked; \
+ EXCEPTION_PROLOG_ISERIES_2; \
+ b label##_common; \
+
+#ifdef DO_SOFT_DISABLE
+#define DISABLE_INTS \
+ lbz r10,PACAPROCENABLED(r13); \
+ li r11,0; \
+ std r10,SOFTE(r1); \
+ mfmsr r10; \
+ stb r11,PACAPROCENABLED(r13); \
+ ori r10,r10,MSR_EE; \
+ mtmsrd r10,1
+
+#define ENABLE_INTS \
+ lbz r10,PACAPROCENABLED(r13); \
+ mfmsr r11; \
+ std r10,SOFTE(r1); \
+ ori r11,r11,MSR_EE; \
+ mtmsrd r11,1
+
+#else /* hard enable/disable interrupts */
+#define DISABLE_INTS
+
+#define ENABLE_INTS \
+ ld r12,_MSR(r1); \
+ mfmsr r11; \
+ rlwimi r11,r12,0,MSR_EE; \
+ mtmsrd r11,1
+
+#endif
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
+ .align 7; \
+ .globl label##_common; \
+label##_common: \
+ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
+ DISABLE_INTS; \
+ bl .save_nvgprs; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ bl hdlr; \
+ b .ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
+ .align 7; \
+ .globl label##_common; \
+label##_common: \
+ EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
+ DISABLE_INTS; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ bl hdlr; \
+ b .ret_from_except_lite
+
+/*
+ * Start of pSeries system interrupt routines
+ */
+ . = 0x100
+ .globl __start_interrupts
+__start_interrupts:
+
+ STD_EXCEPTION_PSERIES(0x100, system_reset)
+
+ . = 0x200
+_machine_check_pSeries:
+ HMT_MEDIUM
+ mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+ . = 0x300
+ .globl data_access_pSeries
+data_access_pSeries:
+ HMT_MEDIUM
+ mtspr SPRG1,r13
+BEGIN_FTR_SECTION
+ mtspr SPRG2,r12
+ mfspr r13,DAR
+ mfspr r12,DSISR
+ srdi r13,r13,60
+ rlwimi r13,r12,16,0x20
+ mfcr r12
+ cmpwi r13,0x2c
+ beq .do_stab_bolted_pSeries
+ mtcrf 0x80,r12
+ mfspr r12,SPRG2
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+
+ . = 0x380
+ .globl data_access_slb_pSeries
+data_access_slb_pSeries:
+ HMT_MEDIUM
+ mtspr SPRG1,r13
+ RUNLATCH_ON(r13)
+ mfspr r13,SPRG3 /* get paca address into r13 */
+ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r9,SPRG1
+ std r9,PACA_EXSLB+EX_R13(r13)
+ mfcr r9
+ mfspr r12,SRR1 /* and SRR1 */
+ mfspr r3,DAR
+ b .do_slb_miss /* Rel. branch works in real mode */
+
+ STD_EXCEPTION_PSERIES(0x400, instruction_access)
+
+ . = 0x480
+ .globl instruction_access_slb_pSeries
+instruction_access_slb_pSeries:
+ HMT_MEDIUM
+ mtspr SPRG1,r13
+ RUNLATCH_ON(r13)
+ mfspr r13,SPRG3 /* get paca address into r13 */
+ std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */
+ std r10,PACA_EXSLB+EX_R10(r13)
+ std r11,PACA_EXSLB+EX_R11(r13)
+ std r12,PACA_EXSLB+EX_R12(r13)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ mfspr r9,SPRG1
+ std r9,PACA_EXSLB+EX_R13(r13)
+ mfcr r9
+ mfspr r12,SRR1 /* and SRR1 */
+ mfspr r3,SRR0 /* SRR0 is faulting address */
+ b .do_slb_miss /* Rel. branch works in real mode */
+
+ STD_EXCEPTION_PSERIES(0x500, hardware_interrupt)
+ STD_EXCEPTION_PSERIES(0x600, alignment)
+ STD_EXCEPTION_PSERIES(0x700, program_check)
+ STD_EXCEPTION_PSERIES(0x800, fp_unavailable)
+ STD_EXCEPTION_PSERIES(0x900, decrementer)
+ STD_EXCEPTION_PSERIES(0xa00, trap_0a)
+ STD_EXCEPTION_PSERIES(0xb00, trap_0b)
+
+ . = 0xc00
+ .globl system_call_pSeries
+system_call_pSeries:
+ HMT_MEDIUM
+ RUNLATCH_ON(r9)
+ mr r9,r13
+ mfmsr r10
+ mfspr r13,SPRG3
+ mfspr r11,SRR0
+ clrrdi r12,r13,32
+ oris r12,r12,system_call_common@h
+ ori r12,r12,system_call_common@l
+ mtspr SRR0,r12
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ mfspr r12,SRR1
+ mtspr SRR1,r10
+ rfid
+ b . /* prevent speculative execution */
+
+ STD_EXCEPTION_PSERIES(0xd00, single_step)
+ STD_EXCEPTION_PSERIES(0xe00, trap_0e)
+
+ /* We need to deal with the Altivec unavailable exception
+ * here which is at 0xf20, thus in the middle of the
+ * prolog code of the PerformanceMonitor one. A little
+ * trickery is thus necessary
+ */
+ . = 0xf00
+ b performance_monitor_pSeries
+
+ STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
+
+ STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint)
+ STD_EXCEPTION_PSERIES(0x1700, altivec_assist)
+
+ . = 0x3000
+
+/*** pSeries interrupt support ***/
+
+ /* moved from 0xf00 */
+ STD_EXCEPTION_PSERIES(., performance_monitor)
+
+ .align 7
+_GLOBAL(do_stab_bolted_pSeries)
+ mtcrf 0x80,r12
+ mfspr r12,SPRG2
+ EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+
+/*
+ * Vectors for the FWNMI option. Share common code.
+ */
+ .globl system_reset_fwnmi
+system_reset_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
+
+ .globl machine_check_fwnmi
+machine_check_fwnmi:
+ HMT_MEDIUM
+ mtspr SPRG1,r13 /* save r13 */
+ RUNLATCH_ON(r13)
+ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
+
+#ifdef CONFIG_PPC_ISERIES
+/*** ISeries-LPAR interrupt handlers ***/
+
+ STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC)
+
+ .globl data_access_iSeries
+data_access_iSeries:
+ mtspr SPRG1,r13
+BEGIN_FTR_SECTION
+ mtspr SPRG2,r12
+ mfspr r13,DAR
+ mfspr r12,DSISR
+ srdi r13,r13,60
+ rlwimi r13,r12,16,0x20
+ mfcr r12
+ cmpwi r13,0x2c
+ beq .do_stab_bolted_iSeries
+ mtcrf 0x80,r12
+ mfspr r12,SPRG2
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+ EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN)
+ EXCEPTION_PROLOG_ISERIES_2
+ b data_access_common
+
+.do_stab_bolted_iSeries:
+ mtcrf 0x80,r12
+ mfspr r12,SPRG2
+ EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+ EXCEPTION_PROLOG_ISERIES_2
+ b .do_stab_bolted
+
+ .globl data_access_slb_iSeries
+data_access_slb_iSeries:
+ mtspr SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ ld r12,PACALPPACA+LPPACASRR1(r13)
+ mfspr r3,DAR
+ b .do_slb_miss
+
+ STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN)
+
+ .globl instruction_access_slb_iSeries
+instruction_access_slb_iSeries:
+ mtspr SPRG1,r13 /* save r13 */
+ EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB)
+ std r3,PACA_EXSLB+EX_R3(r13)
+ ld r12,PACALPPACA+LPPACASRR1(r13)
+ ld r3,PACALPPACA+LPPACASRR0(r13)
+ b .do_slb_miss
+
+ MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt)
+ STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN)
+ STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN)
+ STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN)
+ MASKABLE_EXCEPTION_ISERIES(0x900, decrementer)
+ STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN)
+ STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN)
+
+ .globl system_call_iSeries
+system_call_iSeries:
+ mr r9,r13
+ mfspr r13,SPRG3
+ EXCEPTION_PROLOG_ISERIES_2
+ b system_call_common
+
+ STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN)
+ STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN)
+ STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN)
+
+ .globl system_reset_iSeries
+system_reset_iSeries:
+ mfspr r13,SPRG3 /* Get paca address */
+ mfmsr r24
+ ori r24,r24,MSR_RI
+ mtmsrd r24 /* RI on */
+ lhz r24,PACAPACAINDEX(r13) /* Get processor # */
+ cmpwi 0,r24,0 /* Are we processor 0? */
+ beq .__start_initialization_iSeries /* Start up the first processor */
+ mfspr r4,SPRN_CTRLF
+ li r5,CTRL_RUNLATCH /* Turn off the run light */
+ andc r4,r4,r5
+ mtspr SPRN_CTRLT,r4
+
+1:
+ HMT_LOW
+#ifdef CONFIG_SMP
+ lbz r23,PACAPROCSTART(r13) /* Test if this processor
+ * should start */
+ sync
+ LOADADDR(r3,current_set)
+ sldi r28,r24,3 /* get current_set[cpu#] */
+ ldx r3,r3,r28
+ addi r1,r3,THREAD_SIZE
+ subi r1,r1,STACK_FRAME_OVERHEAD
+
+ cmpwi 0,r23,0
+ beq iSeries_secondary_smp_loop /* Loop until told to go */
+ bne .__secondary_start /* Loop until told to go */
+iSeries_secondary_smp_loop:
+ /* Let the Hypervisor know we are alive */
+ /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */
+ lis r3,0x8002
+ rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */
+#else /* CONFIG_SMP */
+ /* Yield the processor. This is required for non-SMP kernels
+ which are running on multi-threaded machines. */
+ lis r3,0x8000
+ rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */
+ addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */
+ li r4,0 /* "yield timed" */
+ li r5,-1 /* "yield forever" */
+#endif /* CONFIG_SMP */
+ li r0,-1 /* r0=-1 indicates a Hypervisor call */
+ sc /* Invoke the hypervisor via a system call */
+ mfspr r13,SPRG3 /* Put r13 back ???? */
+ b 1b /* If SMP not configured, secondaries
+ * loop forever */
+
+ .globl decrementer_iSeries_masked
+decrementer_iSeries_masked:
+ li r11,1
+ stb r11,PACALPPACA+LPPACADECRINT(r13)
+ lwz r12,PACADEFAULTDECR(r13)
+ mtspr SPRN_DEC,r12
+ /* fall through */
+
+ .globl hardware_interrupt_iSeries_masked
+hardware_interrupt_iSeries_masked:
+ mtcrf 0x80,r9 /* Restore regs */
+ ld r11,PACALPPACA+LPPACASRR0(r13)
+ ld r12,PACALPPACA+LPPACASRR1(r13)
+ mtspr SRR0,r11
+ mtspr SRR1,r12
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+#endif /* CONFIG_PPC_ISERIES */
+
+/*** Common interrupt handlers ***/
+
+ STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
+
+ /*
+ * Machine check is different because we use a different
+ * save area: PACA_EXMC instead of PACA_EXGEN.
+ */
+ .align 7
+ .globl machine_check_common
+machine_check_common:
+ EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+ DISABLE_INTS
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .machine_check_exception
+ b .ret_from_except
+
+ STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
+ STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
+ STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception)
+ STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
+#ifdef CONFIG_ALTIVEC
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
+#else
+ STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
+#endif
+
+/*
+ * Here we have detected that the kernel stack pointer is bad.
+ * R9 contains the saved CR, r13 points to the paca,
+ * r10 contains the (bad) kernel stack pointer,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * We switch to using an emergency stack, save the registers there,
+ * and call kernel_bad_stack(), which panics.
+ */
+bad_stack:
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,64+INT_FRAME_SIZE
+ std r9,_CCR(r1)
+ std r10,GPR1(r1)
+ std r11,_NIP(r1)
+ std r12,_MSR(r1)
+ mfspr r11,DAR
+ mfspr r12,DSISR
+ std r11,_DAR(r1)
+ std r12,_DSISR(r1)
+ mflr r10
+ mfctr r11
+ mfxer r12
+ std r10,_LINK(r1)
+ std r11,_CTR(r1)
+ std r12,_XER(r1)
+ SAVE_GPR(0,r1)
+ SAVE_GPR(2,r1)
+ SAVE_4GPRS(3,r1)
+ SAVE_2GPRS(7,r1)
+ SAVE_10GPRS(12,r1)
+ SAVE_10GPRS(22,r1)
+ addi r11,r1,INT_FRAME_SIZE
+ std r11,0(r1)
+ li r12,0
+ std r12,0(r11)
+ ld r2,PACATOC(r13)
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .kernel_bad_stack
+ b 1b
+
+/*
+ * Return from an exception with minimal checks.
+ * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
+ * If interrupts have been enabled, or anything has been
+ * done that might have changed the scheduling status of
+ * any task or sent any task a signal, you should use
+ * ret_from_except or ret_from_except_lite instead of this.
+ */
+fast_exception_return:
+ ld r12,_MSR(r1)
+ ld r11,_NIP(r1)
+ andi. r3,r12,MSR_RI /* check if RI is set */
+ beq- unrecov_fer
+ ld r3,_CCR(r1)
+ ld r4,_LINK(r1)
+ ld r5,_CTR(r1)
+ ld r6,_XER(r1)
+ mtcr r3
+ mtlr r4
+ mtctr r5
+ mtxer r6
+ REST_GPR(0, r1)
+ REST_8GPRS(2, r1)
+
+ mfmsr r10
+ clrrdi r10,r10,2 /* clear RI (LE is 0 already) */
+ mtmsrd r10,1
+
+ mtspr SRR1,r12
+ mtspr SRR0,r11
+ REST_4GPRS(10, r1)
+ ld r1,GPR1(r1)
+ rfid
+ b . /* prevent speculative execution */
+
+unrecov_fer:
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+/*
+ * Here r13 points to the paca, r9 contains the saved CR,
+ * SRR0 and SRR1 are saved in r11 and r12,
+ * r9 - r13 are saved in paca->exgen.
+ */
+ .align 7
+ .globl data_access_common
+data_access_common:
+ RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */
+ mfspr r10,DAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,DSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+ ld r3,PACA_EXGEN+EX_DAR(r13)
+ lwz r4,PACA_EXGEN+EX_DSISR(r13)
+ li r5,0x300
+ b .do_hash_page /* Try to handle as hpte fault */
+
+ .align 7
+ .globl instruction_access_common
+instruction_access_common:
+ EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+ ld r3,_NIP(r1)
+ andis. r4,r12,0x5820
+ li r5,0x400
+ b .do_hash_page /* Try to handle as hpte fault */
+
+ .align 7
+ .globl hardware_interrupt_common
+ .globl hardware_interrupt_entry
+hardware_interrupt_common:
+ EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+hardware_interrupt_entry:
+ DISABLE_INTS
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_IRQ
+ b .ret_from_except_lite
+
+ .align 7
+ .globl alignment_common
+alignment_common:
+ mfspr r10,DAR
+ std r10,PACA_EXGEN+EX_DAR(r13)
+ mfspr r10,DSISR
+ stw r10,PACA_EXGEN+EX_DSISR(r13)
+ EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
+ ld r3,PACA_EXGEN+EX_DAR(r13)
+ lwz r4,PACA_EXGEN+EX_DSISR(r13)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .alignment_exception
+ b .ret_from_except
+
+ .align 7
+ .globl program_check_common
+program_check_common:
+ EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .program_check_exception
+ b .ret_from_except
+
+ .align 7
+ .globl fp_unavailable_common
+fp_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
+ bne .load_up_fpu /* if from user, just load it up */
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .kernel_fp_unavailable_exception
+ BUG_OPCODE
+
+/*
+ * load_up_fpu(unused, unused, tsk)
+ * Disable FP for the task which had the FPU previously,
+ * and save its floating-point registers in its thread_struct.
+ * Enables the FPU for use in the kernel on return.
+ * On SMP we know the fpu is free, since we give it up every
+ * switch (ie, no lazy save of the FP registers).
+ * On entry: r13 == 'current' && last_task_used_math != 'current'
+ */
+_STATIC(load_up_fpu)
+ mfmsr r5 /* grab the current MSR */
+ ori r5,r5,MSR_FP
+ mtmsrd r5 /* enable use of fpu now */
+ isync
+/*
+ * For SMP, we don't do lazy FPU switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_fpu in switch_to.
+ *
+ */
+#ifndef CONFIG_SMP
+ ld r3,last_task_used_math@got(r2)
+ ld r4,0(r3)
+ cmpdi 0,r4,0
+ beq 1f
+ /* Save FP state to last_task_used_math's THREAD struct */
+ addi r4,r4,THREAD
+ SAVE_32FPRS(0, r4)
+ mffs fr0
+ stfd fr0,THREAD_FPSCR(r4)
+ /* Disable FP for last_task_used_math */
+ ld r5,PT_REGS(r4)
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ li r6,MSR_FP|MSR_FE0|MSR_FE1
+ andc r4,r4,r6
+ std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* enable use of FP after return */
+ ld r4,PACACURRENT(r13)
+ addi r5,r4,THREAD /* Get THREAD */
+ ld r4,THREAD_FPEXC_MODE(r5)
+ ori r12,r12,MSR_FP
+ or r12,r12,r4
+ std r12,_MSR(r1)
+ lfd fr0,THREAD_FPSCR(r5)
+ mtfsf 0xff,fr0
+ REST_32FPRS(0, r5)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ subi r4,r5,THREAD /* Back to 'current' */
+ std r4,0(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ b fast_exception_return
+
+ .align 7
+ .globl altivec_unavailable_common
+altivec_unavailable_common:
+ EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+ bne .load_up_altivec /* if from user, just load it up */
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+ bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ ENABLE_INTS
+ bl .altivec_unavailable_exception
+ b .ret_from_except
+
+#ifdef CONFIG_ALTIVEC
+/*
+ * load_up_altivec(unused, unused, tsk)
+ * Disable VMX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Enables the VMX for use in the kernel on return.
+ * On SMP we know the VMX is free, since we give it up every
+ * switch (ie, no lazy save of the vector registers).
+ * On entry: r13 == 'current' && last_task_used_altivec != 'current'
+ */
+_STATIC(load_up_altivec)
+ mfmsr r5 /* grab the current MSR */
+ oris r5,r5,MSR_VEC@h
+ mtmsrd r5 /* enable use of VMX now */
+ isync
+
+/*
+ * For SMP, we don't do lazy VMX switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_altvec in switch_to.
+ * VRSAVE isn't dealt with here, that is done in the normal context
+ * switch code. Note that we could rely on vrsave value to eventually
+ * avoid saving all of the VREGs here...
+ */
+#ifndef CONFIG_SMP
+ ld r3,last_task_used_altivec@got(r2)
+ ld r4,0(r3)
+ cmpdi 0,r4,0
+ beq 1f
+ /* Save VMX state to last_task_used_altivec's THREAD struct */
+ addi r4,r4,THREAD
+ SAVE_32VRS(0,r5,r4)
+ mfvscr vr0
+ li r10,THREAD_VSCR
+ stvx vr0,r10,r4
+ /* Disable VMX for last_task_used_altivec */
+ ld r5,PT_REGS(r4)
+ ld r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r6,MSR_VEC@h
+ andc r4,r4,r6
+ std r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* Hack: if we get an altivec unavailable trap with VRSAVE
+ * set to all zeros, we assume this is a broken application
+ * that fails to set it properly, and thus we switch it to
+ * all 1's
+ */
+ mfspr r4,SPRN_VRSAVE
+ cmpdi 0,r4,0
+ bne+ 1f
+ li r4,-1
+ mtspr SPRN_VRSAVE,r4
+1:
+ /* enable use of VMX after return */
+ ld r4,PACACURRENT(r13)
+ addi r5,r4,THREAD /* Get THREAD */
+ oris r12,r12,MSR_VEC@h
+ std r12,_MSR(r1)
+ li r4,1
+ li r10,THREAD_VSCR
+ stw r4,THREAD_USED_VR(r5)
+ lvx vr0,r10,r5
+ mtvscr vr0
+ REST_32VRS(0,r4,r5)
+#ifndef CONFIG_SMP
+ /* Update last_task_used_math to 'current' */
+ subi r4,r5,THREAD /* Back to 'current' */
+ std r4,0(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+ b fast_exception_return
+#endif /* CONFIG_ALTIVEC */
+
+/*
+ * Hash table stuff
+ */
+ .align 7
+_GLOBAL(do_hash_page)
+ std r3,_DAR(r1)
+ std r4,_DSISR(r1)
+
+ andis. r0,r4,0xa450 /* weird error? */
+ bne- .handle_page_fault /* if not, try to insert a HPTE */
+BEGIN_FTR_SECTION
+ andis. r0,r4,0x0020 /* Is it a segment table fault? */
+ bne- .do_ste_alloc /* If so handle it */
+END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+
+ /*
+ * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
+ * accessing a userspace segment (even from the kernel). We assume
+ * kernel addresses always have the high bit set.
+ */
+ rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
+ rotldi r0,r3,15 /* Move high bit into MSR_PR posn */
+ orc r0,r12,r0 /* MSR_PR | ~high_bit */
+ rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */
+ ori r4,r4,1 /* add _PAGE_PRESENT */
+ rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
+
+ /*
+ * On iSeries, we soft-disable interrupts here, then
+ * hard-enable interrupts so that the hash_page code can spin on
+ * the hash_table_lock without problems on a shared processor.
+ */
+ DISABLE_INTS
+
+ /*
+ * r3 contains the faulting address
+ * r4 contains the required access permissions
+ * r5 contains the trap number
+ *
+ * at return r3 = 0 for success
+ */
+ bl .hash_page /* build HPTE if possible */
+ cmpdi r3,0 /* see if hash_page succeeded */
+
+#ifdef DO_SOFT_DISABLE
+ /*
+ * If we had interrupts soft-enabled at the point where the
+ * DSI/ISI occurred, and an interrupt came in during hash_page,
+ * handle it now.
+ * We jump to ret_from_except_lite rather than fast_exception_return
+ * because ret_from_except_lite will check for and handle pending
+ * interrupts if necessary.
+ */
+ beq .ret_from_except_lite
+ /* For a hash failure, we don't bother re-enabling interrupts */
+ ble- 12f
+
+ /*
+ * hash_page couldn't handle it, set soft interrupt enable back
+ * to what it was before the trap. Note that .local_irq_restore
+ * handles any interrupts pending at this point.
+ */
+ ld r3,SOFTE(r1)
+ bl .local_irq_restore
+ b 11f
+#else
+ beq fast_exception_return /* Return from exception on success */
+ ble- 12f /* Failure return from hash_page */
+
+ /* fall through */
+#endif
+
+/* Here we have a page fault that hash_page can't handle. */
+_GLOBAL(handle_page_fault)
+ ENABLE_INTS
+11: ld r4,_DAR(r1)
+ ld r5,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_page_fault
+ cmpdi r3,0
+ beq+ .ret_from_except_lite
+ bl .save_nvgprs
+ mr r5,r3
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ lwz r4,_DAR(r1)
+ bl .bad_page_fault
+ b .ret_from_except
+
+/* We have a page fault that hash_page could handle but HV refused
+ * the PTE insertion
+ */
+12: bl .save_nvgprs
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ lwz r4,_DAR(r1)
+ bl .low_hash_fault
+ b .ret_from_except
+
+ /* here we have a segment miss */
+_GLOBAL(do_ste_alloc)
+ bl .ste_allocate /* try to insert stab entry */
+ cmpdi r3,0
+ beq+ fast_exception_return
+ b .handle_page_fault
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * r9 - r13 are saved in paca->exslb.
+ * We assume we aren't going to take any exceptions during this procedure.
+ * We assume (DAR >> 60) == 0xc.
+ */
+ .align 7
+_GLOBAL(do_stab_bolted)
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+
+ /* Hash to the primary group */
+ ld r10,PACASTABVIRT(r13)
+ mfspr r11,DAR
+ srdi r11,r11,28
+ rldimi r10,r11,7,52 /* r10 = first ste of the group */
+
+ /* Calculate VSID */
+ /* This is a kernel address, so protovsid = ESID */
+ ASM_VSID_SCRAMBLE(r11, r9)
+ rldic r9,r11,12,16 /* r9 = vsid << 12 */
+
+ /* Search the primary group for a free entry */
+1: ld r11,0(r10) /* Test valid bit of the current ste */
+ andi. r11,r11,0x80
+ beq 2f
+ addi r10,r10,16
+ andi. r11,r10,0x70
+ bne 1b
+
+ /* Stick for only searching the primary group for now. */
+ /* At least for now, we use a very simple random castout scheme */
+ /* Use the TB as a random number ; OR in 1 to avoid entry 0 */
+ mftb r11
+ rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */
+ ori r11,r11,0x10
+
+ /* r10 currently points to an ste one past the group of interest */
+ /* make it point to the randomly selected entry */
+ subi r10,r10,128
+ or r10,r10,r11 /* r10 is the entry to invalidate */
+
+ isync /* mark the entry invalid */
+ ld r11,0(r10)
+ rldicl r11,r11,56,1 /* clear the valid bit */
+ rotldi r11,r11,8
+ std r11,0(r10)
+ sync
+
+ clrrdi r11,r11,28 /* Get the esid part of the ste */
+ slbie r11
+
+2: std r9,8(r10) /* Store the vsid part of the ste */
+ eieio
+
+ mfspr r11,DAR /* Get the new esid */
+ clrrdi r11,r11,28 /* Permits a full 32b of ESID */
+ ori r11,r11,0x90 /* Turn on valid and kp */
+ std r11,0(r10) /* Put new entry back into the stab */
+
+ sync
+
+ /* All done -- return from exception. */
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+ ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */
+
+ andi. r10,r12,MSR_RI
+ beq- unrecov_slb
+
+ mtcrf 0x80,r9 /* restore CR */
+
+ mfmsr r10
+ clrrdi r10,r10,2
+ mtmsrd r10,1
+
+ mtspr SRR0,r11
+ mtspr SRR1,r12
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+/*
+ * r13 points to the PACA, r9 contains the saved CR,
+ * r11 and r12 contain the saved SRR0 and SRR1.
+ * r3 has the faulting address
+ * r9 - r13 are saved in paca->exslb.
+ * r3 is saved in paca->slb_r3
+ * We assume we aren't going to take any exceptions during this procedure.
+ */
+_GLOBAL(do_slb_miss)
+ mflr r10
+
+ stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
+ std r10,PACA_EXSLB+EX_LR(r13) /* save LR */
+
+ bl .slb_allocate /* handle it */
+
+ /* All done -- return from exception. */
+
+ ld r10,PACA_EXSLB+EX_LR(r13)
+ ld r3,PACA_EXSLB+EX_R3(r13)
+ lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
+#ifdef CONFIG_PPC_ISERIES
+ ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */
+#endif /* CONFIG_PPC_ISERIES */
+
+ mtlr r10
+
+ andi. r10,r12,MSR_RI /* check for unrecoverable exception */
+ beq- unrecov_slb
+
+.machine push
+.machine "power4"
+ mtcrf 0x80,r9
+ mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
+.machine pop
+
+#ifdef CONFIG_PPC_ISERIES
+ mtspr SRR0,r11
+ mtspr SRR1,r12
+#endif /* CONFIG_PPC_ISERIES */
+ ld r9,PACA_EXSLB+EX_R9(r13)
+ ld r10,PACA_EXSLB+EX_R10(r13)
+ ld r11,PACA_EXSLB+EX_R11(r13)
+ ld r12,PACA_EXSLB+EX_R12(r13)
+ ld r13,PACA_EXSLB+EX_R13(r13)
+ rfid
+ b . /* prevent speculative execution */
+
+unrecov_slb:
+ EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
+ DISABLE_INTS
+ bl .save_nvgprs
+1: addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .unrecoverable_exception
+ b 1b
+
+/*
+ * Space for CPU0's segment table.
+ *
+ * On iSeries, the hypervisor must fill in at least one entry before
+ * we get control (with relocate on). The address is give to the hv
+ * as a page number (see xLparMap in LparData.c), so this must be at a
+ * fixed address (the linker can't compute (u64)&initial_stab >>
+ * PAGE_SHIFT).
+ */
+ . = STAB0_PHYS_ADDR /* 0x6000 */
+ .globl initial_stab
+initial_stab:
+ .space 4096
+
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+ .= 0x7000
+ .globl fwnmi_data_area
+fwnmi_data_area:
+
+ /* iSeries does not use the FWNMI stuff, so it is safe to put
+ * this here, even if we later allow kernels that will boot on
+ * both pSeries and iSeries */
+#ifdef CONFIG_PPC_ISERIES
+ . = LPARMAP_PHYS
+#include "lparmap.s"
+/*
+ * This ".text" is here for old compilers that generate a trailing
+ * .note section when compiling .c files to .s
+ */
+ .text
+#endif /* CONFIG_PPC_ISERIES */
+
+ . = 0x8000
+
+/*
+ * On pSeries, secondary processors spin in the following code.
+ * At entry, r3 = this processor's number (physical cpu id)
+ */
+_GLOBAL(pSeries_secondary_smp_init)
+ mr r24,r3
+
+ /* turn on 64-bit mode */
+ bl .enable_64b_mode
+ isync
+
+ /* Copy some CPU settings from CPU 0 */
+ bl .__restore_cpu_setup
+
+ /* Set up a paca value for this processor. Since we have the
+ * physical cpu id in r24, we need to search the pacas to find
+ * which logical id maps to our physical one.
+ */
+ LOADADDR(r13, paca) /* Get base vaddr of paca array */
+ li r5,0 /* logical cpu id */
+1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */
+ cmpw r6,r24 /* Compare to our id */
+ beq 2f
+ addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */
+ addi r5,r5,1
+ cmpwi r5,NR_CPUS
+ blt 1b
+
+ mr r3,r24 /* not found, copy phys to r3 */
+ b .kexec_wait /* next kernel might do better */
+
+2: mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+ /* From now on, r24 is expected to be logical cpuid */
+ mr r24,r5
+3: HMT_LOW
+ lbz r23,PACAPROCSTART(r13) /* Test if this processor should */
+ /* start. */
+ sync
+
+ /* Create a temp kernel stack for use before relocation is on. */
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,STACK_FRAME_OVERHEAD
+
+ cmpwi 0,r23,0
+#ifdef CONFIG_SMP
+ bne .__secondary_start
+#endif
+ b 3b /* Loop until told to go */
+
+#ifdef CONFIG_PPC_ISERIES
+_STATIC(__start_initialization_iSeries)
+ /* Clear out the BSS */
+ LOADADDR(r11,__bss_stop)
+ LOADADDR(r8,__bss_start)
+ sub r11,r11,r8 /* bss size */
+ addi r11,r11,7 /* round up to an even double word */
+ rldicl. r11,r11,61,3 /* shift right by 3 */
+ beq 4f
+ addi r8,r8,-8
+ li r0,0
+ mtctr r11 /* zero this many doublewords */
+3: stdu r0,8(r8)
+ bdnz 3b
+4:
+ LOADADDR(r1,init_thread_union)
+ addi r1,r1,THREAD_SIZE
+ li r0,0
+ stdu r0,-STACK_FRAME_OVERHEAD(r1)
+
+ LOADADDR(r3,cpu_specs)
+ LOADADDR(r4,cur_cpu_spec)
+ li r5,0
+ bl .identify_cpu
+
+ LOADADDR(r2,__toc_start)
+ addi r2,r2,0x4000
+ addi r2,r2,0x4000
+
+ bl .iSeries_early_setup
+
+ /* relocation is on at this point */
+
+ b .start_here_common
+#endif /* CONFIG_PPC_ISERIES */
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+
+_STATIC(__mmu_off)
+ mfmsr r3
+ andi. r0,r3,MSR_IR|MSR_DR
+ beqlr
+ andc r3,r3,r0
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ sync
+ rfid
+ b . /* prevent speculative execution */
+
+
+/*
+ * Here is our main kernel entry point. We support currently 2 kind of entries
+ * depending on the value of r5.
+ *
+ * r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content
+ * in r3...r7
+ *
+ * r5 == NULL -> kexec style entry. r3 is a physical pointer to the
+ * DT block, r4 is a physical pointer to the kernel itself
+ *
+ */
+_GLOBAL(__start_initialization_multiplatform)
+ /*
+ * Are we booted from a PROM Of-type client-interface ?
+ */
+ cmpldi cr0,r5,0
+ bne .__boot_from_prom /* yes -> prom */
+
+ /* Save parameters */
+ mr r31,r3
+ mr r30,r4
+
+ /* Make sure we are running in 64 bits mode */
+ bl .enable_64b_mode
+
+ /* Setup some critical 970 SPRs before switching MMU off */
+ bl .__970_cpu_preinit
+
+ /* cpu # */
+ li r24,0
+
+ /* Switch off MMU if not already */
+ LOADADDR(r4, .__after_prom_start - KERNELBASE)
+ add r4,r4,r30
+ bl .__mmu_off
+ b .__after_prom_start
+
+_STATIC(__boot_from_prom)
+ /* Save parameters */
+ mr r31,r3
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+
+ /* Make sure we are running in 64 bits mode */
+ bl .enable_64b_mode
+
+ /* put a relocation offset into r3 */
+ bl .reloc_offset
+
+ LOADADDR(r2,__toc_start)
+ addi r2,r2,0x4000
+ addi r2,r2,0x4000
+
+ /* Relocate the TOC from a virt addr to a real addr */
+ sub r2,r2,r3
+
+ /* Restore parameters */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+
+ /* Do all of the interaction with OF client interface */
+ bl .prom_init
+ /* We never return */
+ trap
+
+/*
+ * At this point, r3 contains the physical address we are running at,
+ * returned by prom_init()
+ */
+_STATIC(__after_prom_start)
+
+/*
+ * We need to run with __start at physical address 0.
+ * This will leave some code in the first 256B of
+ * real memory, which are reserved for software use.
+ * The remainder of the first page is loaded with the fixed
+ * interrupt vectors. The next two pages are filled with
+ * unknown exception placeholders.
+ *
+ * Note: This process overwrites the OF exception vectors.
+ * r26 == relocation offset
+ * r27 == KERNELBASE
+ */
+ bl .reloc_offset
+ mr r26,r3
+ SET_REG_TO_CONST(r27,KERNELBASE)
+
+ li r3,0 /* target addr */
+
+ // XXX FIXME: Use phys returned by OF (r30)
+ sub r4,r27,r26 /* source addr */
+ /* current address of _start */
+ /* i.e. where we are running */
+ /* the source addr */
+
+ LOADADDR(r5,copy_to_here) /* # bytes of memory to copy */
+ sub r5,r5,r27
+
+ li r6,0x100 /* Start offset, the first 0x100 */
+ /* bytes were copied earlier. */
+
+ bl .copy_and_flush /* copy the first n bytes */
+ /* this includes the code being */
+ /* executed here. */
+
+ LOADADDR(r0, 4f) /* Jump to the copy of this code */
+ mtctr r0 /* that we just made/relocated */
+ bctr
+
+4: LOADADDR(r5,klimit)
+ sub r5,r5,r26
+ ld r5,0(r5) /* get the value of klimit */
+ sub r5,r5,r27
+ bl .copy_and_flush /* copy the rest */
+ b .start_here_multiplatform
+
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+/*
+ * Copy routine used to copy the kernel to start at physical address 0
+ * and flush and invalidate the caches as needed.
+ * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
+ * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
+ *
+ * Note: this routine *only* clobbers r0, r6 and lr
+ */
+_GLOBAL(copy_and_flush)
+ addi r5,r5,-8
+ addi r6,r6,-8
+4: li r0,16 /* Use the least common */
+ /* denominator cache line */
+ /* size. This results in */
+ /* extra cache line flushes */
+ /* but operation is correct. */
+ /* Can't get cache line size */
+ /* from NACA as it is being */
+ /* moved too. */
+
+ mtctr r0 /* put # words/line in ctr */
+3: addi r6,r6,8 /* copy a cache line */
+ ldx r0,r6,r4
+ stdx r0,r6,r3
+ bdnz 3b
+ dcbst r6,r3 /* write it to memory */
+ sync
+ icbi r6,r3 /* flush the icache line */
+ cmpld 0,r6,r5
+ blt 4b
+ sync
+ addi r5,r5,8
+ addi r6,r6,8
+ blr
+
+.align 8
+copy_to_here:
+
+#ifdef CONFIG_SMP
+#ifdef CONFIG_PPC_PMAC
+/*
+ * On PowerMac, secondary processors starts from the reset vector, which
+ * is temporarily turned into a call to one of the functions below.
+ */
+ .section ".text";
+ .align 2 ;
+
+ .globl pmac_secondary_start_1
+pmac_secondary_start_1:
+ li r24, 1
+ b .pmac_secondary_start
+
+ .globl pmac_secondary_start_2
+pmac_secondary_start_2:
+ li r24, 2
+ b .pmac_secondary_start
+
+ .globl pmac_secondary_start_3
+pmac_secondary_start_3:
+ li r24, 3
+ b .pmac_secondary_start
+
+_GLOBAL(pmac_secondary_start)
+ /* turn on 64-bit mode */
+ bl .enable_64b_mode
+ isync
+
+ /* Copy some CPU settings from CPU 0 */
+ bl .__restore_cpu_setup
+
+ /* pSeries do that early though I don't think we really need it */
+ mfmsr r3
+ ori r3,r3,MSR_RI
+ mtmsrd r3 /* RI on */
+
+ /* Set up a paca value for this processor. */
+ LOADADDR(r4, paca) /* Get base vaddr of paca array */
+ mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */
+ add r13,r13,r4 /* for this processor. */
+ mtspr SPRG3,r13 /* Save vaddr of paca in SPRG3 */
+
+ /* Create a temp kernel stack for use before relocation is on. */
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,STACK_FRAME_OVERHEAD
+
+ b .__secondary_start
+
+#endif /* CONFIG_PPC_PMAC */
+
+/*
+ * This function is called after the master CPU has released the
+ * secondary processors. The execution environment is relocation off.
+ * The paca for this processor has the following fields initialized at
+ * this point:
+ * 1. Processor number
+ * 2. Segment table pointer (virtual address)
+ * On entry the following are set:
+ * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries
+ * r24 = cpu# (in Linux terms)
+ * r13 = paca virtual address
+ * SPRG3 = paca virtual address
+ */
+_GLOBAL(__secondary_start)
+
+ HMT_MEDIUM /* Set thread priority to MEDIUM */
+
+ ld r2,PACATOC(r13)
+ li r6,0
+ stb r6,PACAPROCENABLED(r13)
+
+#ifndef CONFIG_PPC_ISERIES
+ /* Initialize the page table pointer register. */
+ LOADADDR(r6,_SDR1)
+ ld r6,0(r6) /* get the value of _SDR1 */
+ mtspr SDR1,r6 /* set the htab location */
+#endif
+ /* Initialize the first segment table (or SLB) entry */
+ ld r3,PACASTABVIRT(r13) /* get addr of segment table */
+ bl .stab_initialize
+
+ /* Initialize the kernel stack. Just a repeat for iSeries. */
+ LOADADDR(r3,current_set)
+ sldi r28,r24,3 /* get current_set[cpu#] */
+ ldx r1,r3,r28
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ std r1,PACAKSAVE(r13)
+
+ ld r3,PACASTABREAL(r13) /* get raddr of segment table */
+ ori r4,r3,1 /* turn on valid bit */
+
+#ifdef CONFIG_PPC_ISERIES
+ li r0,-1 /* hypervisor call */
+ li r3,1
+ sldi r3,r3,63 /* 0x8000000000000000 */
+ ori r3,r3,4 /* 0x8000000000000004 */
+ sc /* HvCall_setASR */
+#else
+ /* set the ASR */
+ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */
+ ld r3,0(r3)
+ lwz r3,PLATFORM(r3) /* r3 = platform flags */
+ andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */
+ beq 98f /* branch if result is 0 */
+ mfspr r3,PVR
+ srwi r3,r3,16
+ cmpwi r3,0x37 /* SStar */
+ beq 97f
+ cmpwi r3,0x36 /* IStar */
+ beq 97f
+ cmpwi r3,0x34 /* Pulsar */
+ bne 98f
+97: li r3,H_SET_ASR /* hcall = H_SET_ASR */
+ HVSC /* Invoking hcall */
+ b 99f
+98: /* !(rpa hypervisor) || !(star) */
+ mtasr r4 /* set the stab location */
+99:
+#endif
+ li r7,0
+ mtlr r7
+
+ /* enable MMU and jump to start_secondary */
+ LOADADDR(r3,.start_secondary_prolog)
+ SET_REG_TO_CONST(r4, MSR_KERNEL)
+#ifdef DO_SOFT_DISABLE
+ ori r4,r4,MSR_EE
+#endif
+ mtspr SRR0,r3
+ mtspr SRR1,r4
+ rfid
+ b . /* prevent speculative execution */
+
+/*
+ * Running with relocation on at this point. All we want to do is
+ * zero the stack back-chain pointer before going into C code.
+ */
+_GLOBAL(start_secondary_prolog)
+ li r3,0
+ std r3,0(r1) /* Zero the stack frame pointer */
+ bl .start_secondary
+#endif
+
+/*
+ * This subroutine clobbers r11 and r12
+ */
+_GLOBAL(enable_64b_mode)
+ mfmsr r11 /* grab the current MSR */
+ li r12,1
+ rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
+ or r11,r11,r12
+ li r12,1
+ rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
+ or r11,r11,r12
+ mtmsrd r11
+ isync
+ blr
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+/*
+ * This is where the main kernel code starts.
+ */
+_STATIC(start_here_multiplatform)
+ /* get a new offset, now that the kernel has moved. */
+ bl .reloc_offset
+ mr r26,r3
+
+ /* Clear out the BSS. It may have been done in prom_init,
+ * already but that's irrelevant since prom_init will soon
+ * be detached from the kernel completely. Besides, we need
+ * to clear it now for kexec-style entry.
+ */
+ LOADADDR(r11,__bss_stop)
+ LOADADDR(r8,__bss_start)
+ sub r11,r11,r8 /* bss size */
+ addi r11,r11,7 /* round up to an even double word */
+ rldicl. r11,r11,61,3 /* shift right by 3 */
+ beq 4f
+ addi r8,r8,-8
+ li r0,0
+ mtctr r11 /* zero this many doublewords */
+3: stdu r0,8(r8)
+ bdnz 3b
+4:
+
+ mfmsr r6
+ ori r6,r6,MSR_RI
+ mtmsrd r6 /* RI on */
+
+#ifdef CONFIG_HMT
+ /* Start up the second thread on cpu 0 */
+ mfspr r3,PVR
+ srwi r3,r3,16
+ cmpwi r3,0x34 /* Pulsar */
+ beq 90f
+ cmpwi r3,0x36 /* Icestar */
+ beq 90f
+ cmpwi r3,0x37 /* SStar */
+ beq 90f
+ b 91f /* HMT not supported */
+90: li r3,0
+ bl .hmt_start_secondary
+91:
+#endif
+
+ /* The following gets the stack and TOC set up with the regs */
+ /* pointing to the real addr of the kernel stack. This is */
+ /* all done to support the C function call below which sets */
+ /* up the htab. This is done because we have relocated the */
+ /* kernel but are still running in real mode. */
+
+ LOADADDR(r3,init_thread_union)
+ sub r3,r3,r26
+
+ /* set up a stack pointer (physical address) */
+ addi r1,r3,THREAD_SIZE
+ li r0,0
+ stdu r0,-STACK_FRAME_OVERHEAD(r1)
+
+ /* set up the TOC (physical address) */
+ LOADADDR(r2,__toc_start)
+ addi r2,r2,0x4000
+ addi r2,r2,0x4000
+ sub r2,r2,r26
+
+ LOADADDR(r3,cpu_specs)
+ sub r3,r3,r26
+ LOADADDR(r4,cur_cpu_spec)
+ sub r4,r4,r26
+ mr r5,r26
+ bl .identify_cpu
+
+ /* Save some low level config HIDs of CPU0 to be copied to
+ * other CPUs later on, or used for suspend/resume
+ */
+ bl .__save_cpu_setup
+ sync
+
+ /* Setup a valid physical PACA pointer in SPRG3 for early_setup
+ * note that boot_cpuid can always be 0 nowadays since there is
+ * nowhere it can be initialized differently before we reach this
+ * code
+ */
+ LOADADDR(r27, boot_cpuid)
+ sub r27,r27,r26
+ lwz r27,0(r27)
+
+ LOADADDR(r24, paca) /* Get base vaddr of paca array */
+ mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */
+ add r13,r13,r24 /* for this processor. */
+ sub r13,r13,r26 /* convert to physical addr */
+ mtspr SPRG3,r13 /* PPPBBB: Temp... -Peter */
+
+ /* Do very early kernel initializations, including initial hash table,
+ * stab and slb setup before we turn on relocation. */
+
+ /* Restore parameters passed from prom_init/kexec */
+ mr r3,r31
+ bl .early_setup
+
+ /* set the ASR */
+ ld r3,PACASTABREAL(r13)
+ ori r4,r3,1 /* turn on valid bit */
+ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */
+ ld r3,0(r3)
+ lwz r3,PLATFORM(r3) /* r3 = platform flags */
+ andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */
+ beq 98f /* branch if result is 0 */
+ mfspr r3,PVR
+ srwi r3,r3,16
+ cmpwi r3,0x37 /* SStar */
+ beq 97f
+ cmpwi r3,0x36 /* IStar */
+ beq 97f
+ cmpwi r3,0x34 /* Pulsar */
+ bne 98f
+97: li r3,H_SET_ASR /* hcall = H_SET_ASR */
+ HVSC /* Invoking hcall */
+ b 99f
+98: /* !(rpa hypervisor) || !(star) */
+ mtasr r4 /* set the stab location */
+99:
+ /* Set SDR1 (hash table pointer) */
+ ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */
+ ld r3,0(r3)
+ lwz r3,PLATFORM(r3) /* r3 = platform flags */
+ /* Test if bit 0 is set (LPAR bit) */
+ andi. r3,r3,PLATFORM_LPAR
+ bne 98f /* branch if result is !0 */
+ LOADADDR(r6,_SDR1) /* Only if NOT LPAR */
+ sub r6,r6,r26
+ ld r6,0(r6) /* get the value of _SDR1 */
+ mtspr SDR1,r6 /* set the htab location */
+98:
+ LOADADDR(r3,.start_here_common)
+ SET_REG_TO_CONST(r4, MSR_KERNEL)
+ mtspr SRR0,r3
+ mtspr SRR1,r4
+ rfid
+ b . /* prevent speculative execution */
+#endif /* CONFIG_PPC_MULTIPLATFORM */
+
+ /* This is where all platforms converge execution */
+_STATIC(start_here_common)
+ /* relocation is on at this point */
+
+ /* The following code sets up the SP and TOC now that we are */
+ /* running with translation enabled. */
+
+ LOADADDR(r3,init_thread_union)
+
+ /* set up the stack */
+ addi r1,r3,THREAD_SIZE
+ li r0,0
+ stdu r0,-STACK_FRAME_OVERHEAD(r1)
+
+ /* Apply the CPUs-specific fixups (nop out sections not relevant
+ * to this CPU
+ */
+ li r3,0
+ bl .do_cpu_ftr_fixups
+
+ LOADADDR(r26, boot_cpuid)
+ lwz r26,0(r26)
+
+ LOADADDR(r24, paca) /* Get base vaddr of paca array */
+ mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */
+ add r13,r13,r24 /* for this processor. */
+ mtspr SPRG3,r13
+
+ /* ptr to current */
+ LOADADDR(r4,init_task)
+ std r4,PACACURRENT(r13)
+
+ /* Load the TOC */
+ ld r2,PACATOC(r13)
+ std r1,PACAKSAVE(r13)
+
+ bl .setup_system
+
+ /* Load up the kernel context */
+5:
+#ifdef DO_SOFT_DISABLE
+ li r5,0
+ stb r5,PACAPROCENABLED(r13) /* Soft Disabled */
+ mfmsr r5
+ ori r5,r5,MSR_EE /* Hard Enabled */
+ mtmsrd r5
+#endif
+
+ bl .start_kernel
+
+_GLOBAL(hmt_init)
+#ifdef CONFIG_HMT
+ LOADADDR(r5, hmt_thread_data)
+ mfspr r7,PVR
+ srwi r7,r7,16
+ cmpwi r7,0x34 /* Pulsar */
+ beq 90f
+ cmpwi r7,0x36 /* Icestar */
+ beq 91f
+ cmpwi r7,0x37 /* SStar */
+ beq 91f
+ b 101f
+90: mfspr r6,PIR
+ andi. r6,r6,0x1f
+ b 92f
+91: mfspr r6,PIR
+ andi. r6,r6,0x3ff
+92: sldi r4,r24,3
+ stwx r6,r5,r4
+ bl .hmt_start_secondary
+ b 101f
+
+__hmt_secondary_hold:
+ LOADADDR(r5, hmt_thread_data)
+ clrldi r5,r5,4
+ li r7,0
+ mfspr r6,PIR
+ mfspr r8,PVR
+ srwi r8,r8,16
+ cmpwi r8,0x34
+ bne 93f
+ andi. r6,r6,0x1f
+ b 103f
+93: andi. r6,r6,0x3f
+
+103: lwzx r8,r5,r7
+ cmpw r8,r6
+ beq 104f
+ addi r7,r7,8
+ b 103b
+
+104: addi r7,r7,4
+ lwzx r9,r5,r7
+ mr r24,r9
+101:
+#endif
+ mr r3,r24
+ b .pSeries_secondary_smp_init
+
+#ifdef CONFIG_HMT
+_GLOBAL(hmt_start_secondary)
+ LOADADDR(r4,__hmt_secondary_hold)
+ clrldi r4,r4,4
+ mtspr NIADORM, r4
+ mfspr r4, MSRDORM
+ li r5, -65
+ and r4, r4, r5
+ mtspr MSRDORM, r4
+ lis r4,0xffef
+ ori r4,r4,0x7403
+ mtspr TSC, r4
+ li r4,0x1f4
+ mtspr TST, r4
+ mfspr r4, HID0
+ ori r4, r4, 0x1
+ mtspr HID0, r4
+ mfspr r4, SPRN_CTRLF
+ oris r4, r4, 0x40
+ mtspr SPRN_CTRLT, r4
+ blr
+#endif
+
+#if defined(CONFIG_KEXEC) || (defined(CONFIG_SMP) && !defined(CONFIG_PPC_ISERIES))
+_GLOBAL(smp_release_cpus)
+ /* All secondary cpus are spinning on a common
+ * spinloop, release them all now so they can start
+ * to spin on their individual paca spinloops.
+ * For non SMP kernels, the secondary cpus never
+ * get out of the common spinloop.
+ */
+ li r3,1
+ LOADADDR(r5,__secondary_hold_spinloop)
+ std r3,0(r5)
+ sync
+ blr
+#endif /* CONFIG_SMP && !CONFIG_PPC_ISERIES */
+
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the bss, which is page-aligned.
+ */
+ .section ".bss"
+
+ .align PAGE_SHIFT
+
+ .globl empty_zero_page
+empty_zero_page:
+ .space PAGE_SIZE
+
+ .globl swapper_pg_dir
+swapper_pg_dir:
+ .space PAGE_SIZE
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+ .globl cmd_line
+cmd_line:
+ .space COMMAND_LINE_SIZE
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
new file mode 100644
index 0000000..cb1a3a5
--- /dev/null
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -0,0 +1,860 @@
+/*
+ * arch/ppc/kernel/except_8xx.S
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ * MPC8xx modifications by Dan Malek
+ * Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ * This file contains low-level support and setup for PowerPC 8xx
+ * embedded processors, including trap and interrupt dispatch.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+/* Macro to make the code more readable. */
+#ifdef CONFIG_8xx_CPU6
+#define DO_8xx_CPU6(val, reg) \
+ li reg, val; \
+ stw reg, 12(r0); \
+ lwz reg, 12(r0);
+#else
+#define DO_8xx_CPU6(val, reg)
+#endif
+ .text
+ .globl _stext
+_stext:
+ .text
+ .globl _start
+_start:
+
+/* MPC8xx
+ * This port was done on an MBX board with an 860. Right now I only
+ * support an ELF compressed (zImage) boot from EPPC-Bug because the
+ * code there loads up some registers before calling us:
+ * r3: ptr to board info data
+ * r4: initrd_start or if no initrd then 0
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ *
+ * I decided to use conditional compilation instead of checking PVR and
+ * adding more processor specific branches around code I don't need.
+ * Since this is an embedded processor, I also appreciate any memory
+ * savings I can get.
+ *
+ * The MPC8xx does not have any BATs, but it supports large page sizes.
+ * We first initialize the MMU to support 8M byte pages, then load one
+ * entry into each of the instruction and data TLBs to map the first
+ * 8M 1:1. I also mapped an additional I/O space 1:1 so we can get to
+ * the "internal" processor registers before MMU_init is called.
+ *
+ * The TLB code currently contains a major hack. Since I use the condition
+ * code register, I have to save and restore it. I am out of registers, so
+ * I just store it in memory location 0 (the TLB handlers are not reentrant).
+ * To avoid making any decisions, I need to use the "segment" valid bit
+ * in the first level table, but that would require many changes to the
+ * Linux page directory/table functions that I don't want to do right now.
+ *
+ * I used to use SPRG2 for a temporary register in the TLB handler, but it
+ * has since been put to other uses. I now use a hack to save a register
+ * and the CCR at memory location 0.....Someday I'll fix this.....
+ * -- Dan
+ */
+ .globl __start
+__start:
+ mr r31,r3 /* save parameters */
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+
+ /* We have to turn on the MMU right away so we get cache modes
+ * set correctly.
+ */
+ bl initial_mmu
+
+/* We now have the lower 8 Meg mapped into TLB entries, and the caches
+ * ready to work.
+ */
+
+turn_on_mmu:
+ mfmsr r0
+ ori r0,r0,MSR_DR|MSR_IR
+ mtspr SPRN_SRR1,r0
+ lis r0,start_here@h
+ ori r0,r0,start_here@l
+ mtspr SPRN_SRR0,r0
+ SYNC
+ rfi /* enables MMU */
+
+/*
+ * Exception entry code. This code runs with address translation
+ * turned off, i.e. using physical addresses.
+ * We assume sprg3 has the physical address of the current
+ * task's thread_struct.
+ */
+#define EXCEPTION_PROLOG \
+ mtspr SPRN_SPRG0,r10; \
+ mtspr SPRN_SPRG1,r11; \
+ mfcr r10; \
+ EXCEPTION_PROLOG_1; \
+ EXCEPTION_PROLOG_2
+
+#define EXCEPTION_PROLOG_1 \
+ mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
+ andi. r11,r11,MSR_PR; \
+ tophys(r11,r1); /* use tophys(r1) if kernel */ \
+ beq 1f; \
+ mfspr r11,SPRN_SPRG3; \
+ lwz r11,THREAD_INFO-THREAD(r11); \
+ addi r11,r11,THREAD_SIZE; \
+ tophys(r11,r11); \
+1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
+
+
+#define EXCEPTION_PROLOG_2 \
+ CLR_TOP32(r11); \
+ stw r10,_CCR(r11); /* save registers */ \
+ stw r12,GPR12(r11); \
+ stw r9,GPR9(r11); \
+ mfspr r10,SPRN_SPRG0; \
+ stw r10,GPR10(r11); \
+ mfspr r12,SPRN_SPRG1; \
+ stw r12,GPR11(r11); \
+ mflr r10; \
+ stw r10,_LINK(r11); \
+ mfspr r12,SPRN_SRR0; \
+ mfspr r9,SPRN_SRR1; \
+ stw r1,GPR1(r11); \
+ stw r1,0(r11); \
+ tovirt(r1,r11); /* set new kernel sp */ \
+ li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
+ MTMSRD(r10); /* (except for mach check in rtas) */ \
+ stw r0,GPR0(r11); \
+ SAVE_4GPRS(3, r11); \
+ SAVE_2GPRS(7, r11)
+
+/*
+ * Note: code which follows this uses cr0.eq (set if from kernel),
+ * r11, r12 (SRR0), and r9 (SRR1).
+ *
+ * Note2: once we have set r1 we are in a position to take exceptions
+ * again, and we could thus set MSR:RI at that point.
+ */
+
+/*
+ * Exception vectors.
+ */
+#define EXCEPTION(n, label, hdlr, xfer) \
+ . = n; \
+label: \
+ EXCEPTION_PROLOG; \
+ addi r3,r1,STACK_FRAME_OVERHEAD; \
+ xfer(n, hdlr)
+
+#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
+ li r10,trap; \
+ stw r10,TRAP(r11); \
+ li r10,MSR_KERNEL; \
+ copyee(r10, r9); \
+ bl tfer; \
+i##n: \
+ .long hdlr; \
+ .long ret
+
+#define COPY_EE(d, s) rlwimi d,s,0,16,16
+#define NOCOPY(d, s)
+
+#define EXC_XFER_STD(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
+ ret_from_except)
+
+#define EXC_XFER_EE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
+ ret_from_except_full)
+
+#define EXC_XFER_EE_LITE(n, hdlr) \
+ EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
+ ret_from_except)
+
+/* System reset */
+ EXCEPTION(0x100, Reset, UnknownException, EXC_XFER_STD)
+
+/* Machine check */
+ . = 0x200
+MachineCheck:
+ EXCEPTION_PROLOG
+ mfspr r4,SPRN_DAR
+ stw r4,_DAR(r11)
+ mfspr r5,SPRN_DSISR
+ stw r5,_DSISR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_STD(0x200, MachineCheckException)
+
+/* Data access exception.
+ * This is "never generated" by the MPC8xx. We jump to it for other
+ * translation errors.
+ */
+ . = 0x300
+DataAccess:
+ EXCEPTION_PROLOG
+ mfspr r10,SPRN_DSISR
+ stw r10,_DSISR(r11)
+ mr r5,r10
+ mfspr r4,SPRN_DAR
+ EXC_XFER_EE_LITE(0x300, handle_page_fault)
+
+/* Instruction access exception.
+ * This is "never generated" by the MPC8xx. We jump to it for other
+ * translation errors.
+ */
+ . = 0x400
+InstructionAccess:
+ EXCEPTION_PROLOG
+ mr r4,r12
+ mr r5,r9
+ EXC_XFER_EE_LITE(0x400, handle_page_fault)
+
+/* External interrupt */
+ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
+
+/* Alignment exception */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG
+ mfspr r4,SPRN_DAR
+ stw r4,_DAR(r11)
+ mfspr r5,SPRN_DSISR
+ stw r5,_DSISR(r11)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE(0x600, AlignmentException)
+
+/* Program check exception */
+ EXCEPTION(0x700, ProgramCheck, ProgramCheckException, EXC_XFER_STD)
+
+/* No FPU on MPC8xx. This exception is not supposed to happen.
+*/
+ EXCEPTION(0x800, FPUnavailable, UnknownException, EXC_XFER_STD)
+
+/* Decrementer */
+ EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
+
+ EXCEPTION(0xa00, Trap_0a, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0xb00, Trap_0b, UnknownException, EXC_XFER_EE)
+
+/* System call */
+ . = 0xc00
+SystemCall:
+ EXCEPTION_PROLOG
+ EXC_XFER_EE_LITE(0xc00, DoSyscall)
+
+/* Single step - not used on 601 */
+ EXCEPTION(0xd00, SingleStep, SingleStepException, EXC_XFER_STD)
+ EXCEPTION(0xe00, Trap_0e, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0xf00, Trap_0f, UnknownException, EXC_XFER_EE)
+
+/* On the MPC8xx, this is a software emulation interrupt. It occurs
+ * for all unimplemented and illegal instructions.
+ */
+ EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
+
+ . = 0x1100
+/*
+ * For the MPC8xx, this is a software tablewalk to load the instruction
+ * TLB. It is modelled after the example in the Motorola manual. The task
+ * switch loads the M_TWB register with the pointer to the first level table.
+ * If we discover there is no second level table (value is zero) or if there
+ * is an invalid pte, we load that into the TLB, which causes another fault
+ * into the TLB Error interrupt where we can handle such problems.
+ * We have to use the MD_xxx registers for the tablewalk because the
+ * equivalent MI_xxx registers only perform the attribute functions.
+ */
+InstructionTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+ stw r3, 8(r0)
+#endif
+ DO_8xx_CPU6(0x3f80, r3)
+ mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
+ mfcr r10
+ stw r10, 0(r0)
+ stw r11, 4(r0)
+ mfspr r10, SPRN_SRR0 /* Get effective address of fault */
+ DO_8xx_CPU6(0x3780, r3)
+ mtspr SPRN_MD_EPN, r10 /* Have to use MD_EPN for walk, MI_EPN can't */
+ mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ andi. r11, r10, 0x0800 /* Address >= 0x80000000 */
+ beq 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+ rlwimi r10, r11, 0, 2, 19
+3:
+ lwz r11, 0(r10) /* Get the level 1 entry */
+ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
+ beq 2f /* If zero, don't try to find a pte */
+
+ /* We have a pte table, so load the MI_TWC with the attributes
+ * for this "segment."
+ */
+ ori r11,r11,1 /* Set valid bit */
+ DO_8xx_CPU6(0x2b80, r3)
+ mtspr SPRN_MI_TWC, r11 /* Set segment attributes */
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
+ mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
+ lwz r10, 0(r11) /* Get the pte */
+
+ ori r10, r10, _PAGE_ACCESSED
+ stw r10, 0(r11)
+
+ /* The Linux PTE won't go exactly into the MMU TLB.
+ * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 24, 25, 26, and 27 must be
+ * set. All other Linux PTE bits control the behavior
+ * of the MMU.
+ */
+2: li r11, 0x00f0
+ rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
+ DO_8xx_CPU6(0x2d80, r3)
+ mtspr SPRN_MI_RPN, r10 /* Update TLB entry */
+
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ rfi
+
+ . = 0x1200
+DataStoreTLBMiss:
+#ifdef CONFIG_8xx_CPU6
+ stw r3, 8(r0)
+#endif
+ DO_8xx_CPU6(0x3f80, r3)
+ mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
+ mfcr r10
+ stw r10, 0(r0)
+ stw r11, 4(r0)
+ mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ andi. r11, r10, 0x0800
+ beq 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+ rlwimi r10, r11, 0, 2, 19
+3:
+ lwz r11, 0(r10) /* Get the level 1 entry */
+ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
+ beq 2f /* If zero, don't try to find a pte */
+
+ /* We have a pte table, so load fetch the pte from the table.
+ */
+ ori r11, r11, 1 /* Set valid bit in physical L2 page */
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
+ mfspr r10, SPRN_MD_TWC /* ....and get the pte address */
+ lwz r10, 0(r10) /* Get the pte */
+
+ /* Insert the Guarded flag into the TWC from the Linux PTE.
+ * It is bit 27 of both the Linux PTE and the TWC (at least
+ * I got that right :-). It will be better when we can put
+ * this into the Linux pgd/pmd and load it in the operation
+ * above.
+ */
+ rlwimi r11, r10, 0, 27, 27
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11
+
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
+ ori r10, r10, _PAGE_ACCESSED
+ stw r10, 0(r11)
+
+ /* The Linux PTE won't go exactly into the MMU TLB.
+ * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 24, 25, 26, and 27 must be
+ * set. All other Linux PTE bits control the behavior
+ * of the MMU.
+ */
+2: li r11, 0x00f0
+ rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
+ DO_8xx_CPU6(0x3d80, r3)
+ mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
+
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ rfi
+
+/* This is an instruction TLB error on the MPC8xx. This could be due
+ * to many reasons, such as executing guarded memory or illegal instruction
+ * addresses. There is nothing to do but handle a big time error fault.
+ */
+ . = 0x1300
+InstructionTLBError:
+ b InstructionAccess
+
+/* This is the data TLB error on the MPC8xx. This could be due to
+ * many reasons, including a dirty update to a pte. We can catch that
+ * one here, but anything else is an error. First, we track down the
+ * Linux pte. If it is valid, write access is allowed, but the
+ * page dirty bit is not set, we will set it and reload the TLB. For
+ * any other case, we bail out to a higher level function that can
+ * handle it.
+ */
+ . = 0x1400
+DataTLBError:
+#ifdef CONFIG_8xx_CPU6
+ stw r3, 8(r0)
+#endif
+ DO_8xx_CPU6(0x3f80, r3)
+ mtspr SPRN_M_TW, r10 /* Save a couple of working registers */
+ mfcr r10
+ stw r10, 0(r0)
+ stw r11, 4(r0)
+
+ /* First, make sure this was a store operation.
+ */
+ mfspr r10, SPRN_DSISR
+ andis. r11, r10, 0x0200 /* If set, indicates store op */
+ beq 2f
+
+ /* The EA of a data TLB miss is automatically stored in the MD_EPN
+ * register. The EA of a data TLB error is automatically stored in
+ * the DAR, but not the MD_EPN register. We must copy the 20 most
+ * significant bits of the EA from the DAR to MD_EPN before we
+ * start walking the page tables. We also need to copy the CASID
+ * value from the M_CASID register.
+ * Addendum: The EA of a data TLB error is _supposed_ to be stored
+ * in DAR, but it seems that this doesn't happen in some cases, such
+ * as when the error is due to a dcbi instruction to a page with a
+ * TLB that doesn't have the changed bit set. In such cases, there
+ * does not appear to be any way to recover the EA of the error
+ * since it is neither in DAR nor MD_EPN. As a workaround, the
+ * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
+ * are initialized in mapin_ram(). This will avoid the problem,
+ * assuming we only use the dcbi instruction on kernel addresses.
+ */
+ mfspr r10, SPRN_DAR
+ rlwinm r11, r10, 0, 0, 19
+ ori r11, r11, MD_EVALID
+ mfspr r10, SPRN_M_CASID
+ rlwimi r11, r10, 0, 28, 31
+ DO_8xx_CPU6(0x3780, r3)
+ mtspr SPRN_MD_EPN, r11
+
+ mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ andi. r11, r10, 0x0800
+ beq 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+ rlwimi r10, r11, 0, 2, 19
+3:
+ lwz r11, 0(r10) /* Get the level 1 entry */
+ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */
+ beq 2f /* If zero, bail */
+
+ /* We have a pte table, so fetch the pte from the table.
+ */
+ ori r11, r11, 1 /* Set valid bit in physical L2 page */
+ DO_8xx_CPU6(0x3b80, r3)
+ mtspr SPRN_MD_TWC, r11 /* Load pte table base address */
+ mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
+ lwz r10, 0(r11) /* Get the pte */
+
+ andi. r11, r10, _PAGE_RW /* Is it writeable? */
+ beq 2f /* Bail out if not */
+
+ /* Update 'changed', among others.
+ */
+ ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ mfspr r11, SPRN_MD_TWC /* Get pte address again */
+ stw r10, 0(r11) /* and update pte in table */
+
+ /* The Linux PTE won't go exactly into the MMU TLB.
+ * Software indicator bits 21, 22 and 28 must be clear.
+ * Software indicator bits 24, 25, 26, and 27 must be
+ * set. All other Linux PTE bits control the behavior
+ * of the MMU.
+ */
+ li r11, 0x00f0
+ rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
+ DO_8xx_CPU6(0x3d80, r3)
+ mtspr SPRN_MD_RPN, r10 /* Update TLB entry */
+
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ rfi
+2:
+ mfspr r10, SPRN_M_TW /* Restore registers */
+ lwz r11, 0(r0)
+ mtcr r11
+ lwz r11, 4(r0)
+#ifdef CONFIG_8xx_CPU6
+ lwz r3, 8(r0)
+#endif
+ b DataAccess
+
+ EXCEPTION(0x1500, Trap_15, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1600, Trap_16, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1700, Trap_17, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1800, Trap_18, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1900, Trap_19, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1a00, Trap_1a, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1b00, Trap_1b, UnknownException, EXC_XFER_EE)
+
+/* On the MPC8xx, these next four traps are used for development
+ * support of breakpoints and such. Someday I will get around to
+ * using them.
+ */
+ EXCEPTION(0x1c00, Trap_1c, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1d00, Trap_1d, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1e00, Trap_1e, UnknownException, EXC_XFER_EE)
+ EXCEPTION(0x1f00, Trap_1f, UnknownException, EXC_XFER_EE)
+
+ . = 0x2000
+
+ .globl giveup_fpu
+giveup_fpu:
+ blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+ /* ptr to current */
+ lis r2,init_task@h
+ ori r2,r2,init_task@l
+
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG3,r4
+ li r3,0
+ mtspr SPRN_SPRG2,r3 /* 0 => r1 has kernel sp */
+
+ /* stack */
+ lis r1,init_thread_union@ha
+ addi r1,r1,init_thread_union@l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+ bl early_init /* We have to do this with MMU on */
+
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+ bl machine_init
+ bl MMU_init
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * and change to using our exception vectors.
+ * On the 8xx, all we have to do is invalidate the TLB to clear
+ * the old 8M byte TLB mappings and load the page table base register.
+ */
+ /* The right way to do this would be to track it down through
+ * init's THREAD like the context switch code does, but this is
+ * easier......until someone changes init's static structures.
+ */
+ lis r6, swapper_pg_dir@h
+ ori r6, r6, swapper_pg_dir@l
+ tophys(r6,r6)
+#ifdef CONFIG_8xx_CPU6
+ lis r4, cpu6_errata_word@h
+ ori r4, r4, cpu6_errata_word@l
+ li r3, 0x3980
+ stw r3, 12(r4)
+ lwz r3, 12(r4)
+#endif
+ mtspr SPRN_M_TWB, r6
+ lis r4,2f@h
+ ori r4,r4,2f@l
+ tophys(r4,r4)
+ li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ rfi
+/* Load up the kernel context */
+2:
+ SYNC /* Force all PTE updates to finish */
+ tlbia /* Clear all TLB entries */
+ sync /* wait for tlbia/tlbie to finish */
+ TLBSYNC /* ... on all CPUs */
+
+ /* set up the PTE pointers for the Abatron bdiGDB.
+ */
+ tovirt(r6,r6)
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r5, 0xf0(r0) /* Must match your Abatron config file */
+ tophys(r5,r5)
+ stw r6, 0(r5)
+
+/* Now turn on the MMU for real! */
+ li r4,MSR_KERNEL
+ lis r3,start_kernel@h
+ ori r3,r3,start_kernel@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ rfi /* enable MMU and jump to start_kernel */
+
+/* Set up the initial MMU state so we can do the first level of
+ * kernel initialization. This maps the first 8 MBytes of memory 1:1
+ * virtual to physical. Also, set the cache mode since that is defined
+ * by TLB entries and perform any additional mapping (like of the IMMR).
+ * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
+ * 24 Mbytes of data, and the 8M IMMR space. Anything not covered by
+ * these mappings is mapped by page tables.
+ */
+initial_mmu:
+ tlbia /* Invalidate all TLB entries */
+#ifdef CONFIG_PIN_TLB
+ lis r8, MI_RSV4I@h
+ ori r8, r8, 0x1c00
+#else
+ li r8, 0
+#endif
+ mtspr SPRN_MI_CTR, r8 /* Set instruction MMU control */
+
+#ifdef CONFIG_PIN_TLB
+ lis r10, (MD_RSV4I | MD_RESETVAL)@h
+ ori r10, r10, 0x1c00
+ mr r8, r10
+#else
+ lis r10, MD_RESETVAL@h
+#endif
+#ifndef CONFIG_8xx_COPYBACK
+ oris r10, r10, MD_WTDEF@h
+#endif
+ mtspr SPRN_MD_CTR, r10 /* Set data TLB control */
+
+ /* Now map the lower 8 Meg into the TLBs. For this quick hack,
+ * we can load the instruction and data TLB registers with the
+ * same values.
+ */
+ lis r8, KERNELBASE@h /* Create vaddr for TLB */
+ ori r8, r8, MI_EVALID /* Mark it valid */
+ mtspr SPRN_MI_EPN, r8
+ mtspr SPRN_MD_EPN, r8
+ li r8, MI_PS8MEG /* Set 8M byte page */
+ ori r8, r8, MI_SVALID /* Make it valid */
+ mtspr SPRN_MI_TWC, r8
+ mtspr SPRN_MD_TWC, r8
+ li r8, MI_BOOTINIT /* Create RPN for address 0 */
+ mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
+ mtspr SPRN_MD_RPN, r8
+ lis r8, MI_Kp@h /* Set the protection mode */
+ mtspr SPRN_MI_AP, r8
+ mtspr SPRN_MD_AP, r8
+
+ /* Map another 8 MByte at the IMMR to get the processor
+ * internal registers (among other things).
+ */
+#ifdef CONFIG_PIN_TLB
+ addi r10, r10, 0x0100
+ mtspr SPRN_MD_CTR, r10
+#endif
+ mfspr r9, 638 /* Get current IMMR */
+ andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
+
+ mr r8, r9 /* Create vaddr for TLB */
+ ori r8, r8, MD_EVALID /* Mark it valid */
+ mtspr SPRN_MD_EPN, r8
+ li r8, MD_PS8MEG /* Set 8M byte page */
+ ori r8, r8, MD_SVALID /* Make it valid */
+ mtspr SPRN_MD_TWC, r8
+ mr r8, r9 /* Create paddr for TLB */
+ ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
+ mtspr SPRN_MD_RPN, r8
+
+#ifdef CONFIG_PIN_TLB
+ /* Map two more 8M kernel data pages.
+ */
+ addi r10, r10, 0x0100
+ mtspr SPRN_MD_CTR, r10
+
+ lis r8, KERNELBASE@h /* Create vaddr for TLB */
+ addis r8, r8, 0x0080 /* Add 8M */
+ ori r8, r8, MI_EVALID /* Mark it valid */
+ mtspr SPRN_MD_EPN, r8
+ li r9, MI_PS8MEG /* Set 8M byte page */
+ ori r9, r9, MI_SVALID /* Make it valid */
+ mtspr SPRN_MD_TWC, r9
+ li r11, MI_BOOTINIT /* Create RPN for address 0 */
+ addis r11, r11, 0x0080 /* Add 8M */
+ mtspr SPRN_MD_RPN, r8
+
+ addis r8, r8, 0x0080 /* Add 8M */
+ mtspr SPRN_MD_EPN, r8
+ mtspr SPRN_MD_TWC, r9
+ addis r11, r11, 0x0080 /* Add 8M */
+ mtspr SPRN_MD_RPN, r8
+#endif
+
+ /* Since the cache is enabled according to the information we
+ * just loaded into the TLB, invalidate and enable the caches here.
+ * We should probably check/set other modes....later.
+ */
+ lis r8, IDC_INVALL@h
+ mtspr SPRN_IC_CST, r8
+ mtspr SPRN_DC_CST, r8
+ lis r8, IDC_ENABLE@h
+ mtspr SPRN_IC_CST, r8
+#ifdef CONFIG_8xx_COPYBACK
+ mtspr SPRN_DC_CST, r8
+#else
+ /* For a debug option, I left this here to easily enable
+ * the write through cache mode
+ */
+ lis r8, DC_SFWT@h
+ mtspr SPRN_DC_CST, r8
+ lis r8, IDC_ENABLE@h
+ mtspr SPRN_DC_CST, r8
+#endif
+ blr
+
+
+/*
+ * Set up to use a given MMU context.
+ * r3 is context number, r4 is PGD pointer.
+ *
+ * We place the physical address of the new task page directory loaded
+ * into the MMU base register, and set the ASID compare register with
+ * the new "context."
+ */
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is passed as second argument.
+ */
+ lis r5, KERNELBASE@h
+ lwz r5, 0xf0(r5)
+ stw r4, 0x4(r5)
+#endif
+
+#ifdef CONFIG_8xx_CPU6
+ lis r6, cpu6_errata_word@h
+ ori r6, r6, cpu6_errata_word@l
+ tophys (r4, r4)
+ li r7, 0x3980
+ stw r7, 12(r6)
+ lwz r7, 12(r6)
+ mtspr SPRN_M_TWB, r4 /* Update MMU base address */
+ li r7, 0x3380
+ stw r7, 12(r6)
+ lwz r7, 12(r6)
+ mtspr SPRN_M_CASID, r3 /* Update context */
+#else
+ mtspr SPRN_M_CASID,r3 /* Update context */
+ tophys (r4, r4)
+ mtspr SPRN_M_TWB, r4 /* and pgd */
+#endif
+ SYNC
+ blr
+
+#ifdef CONFIG_8xx_CPU6
+/* It's here because it is unique to the 8xx.
+ * It is important we get called with interrupts disabled. I used to
+ * do that, but it appears that all code that calls this already had
+ * interrupt disabled.
+ */
+ .globl set_dec_cpu6
+set_dec_cpu6:
+ lis r7, cpu6_errata_word@h
+ ori r7, r7, cpu6_errata_word@l
+ li r4, 0x2c00
+ stw r4, 8(r7)
+ lwz r4, 8(r7)
+ mtspr 22, r3 /* Update Decrementer */
+ SYNC
+ blr
+#endif
+
+/*
+ * We put a few things here that have to be page-aligned.
+ * This stuff goes at the beginning of the data segment,
+ * which is page-aligned.
+ */
+ .data
+ .globl sdata
+sdata:
+ .globl empty_zero_page
+empty_zero_page:
+ .space 4096
+
+ .globl swapper_pg_dir
+swapper_pg_dir:
+ .space 4096
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * Used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+ .globl cmd_line
+cmd_line:
+ .space 512
+
+/* Room for two PTE table poiners, usually the kernel and current user
+ * pointer to their respective root page table (pgdir).
+ */
+abatron_pteptrs:
+ .space 8
+
+#ifdef CONFIG_8xx_CPU6
+ .globl cpu6_errata_word
+cpu6_errata_word:
+ .space 16
+#endif
+
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
new file mode 100644
index 0000000..eba5a5f
--- /dev/null
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -0,0 +1,1058 @@
+/*
+ * arch/ppc/kernel/head_fsl_booke.S
+ *
+ * Kernel execution entry point code.
+ *
+ * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (c) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ * Copyright 2002-2004 MontaVista Software, Inc.
+ * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004 Freescale Semiconductor, Inc
+ * PowerPC e500 modifications, Kumar Gala <kumar.gala@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include "head_booke.h"
+
+/* As with the other PowerPC ports, it is expected that when code
+ * execution begins here, the following registers contain valid, yet
+ * optional, information:
+ *
+ * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
+ * r4 - Starting address of the init RAM disk
+ * r5 - Ending address of the init RAM disk
+ * r6 - Start of kernel command line string (e.g. "mem=128")
+ * r7 - End of kernel command line string
+ *
+ */
+ .text
+_GLOBAL(_stext)
+_GLOBAL(_start)
+ /*
+ * Reserve a word at a fixed location to store the address
+ * of abatron_pteptrs
+ */
+ nop
+/*
+ * Save parameters we are passed
+ */
+ mr r31,r3
+ mr r30,r4
+ mr r29,r5
+ mr r28,r6
+ mr r27,r7
+ li r24,0 /* CPU number */
+
+/* We try to not make any assumptions about how the boot loader
+ * setup or used the TLBs. We invalidate all mappings from the
+ * boot loader and load a single entry in TLB1[0] to map the
+ * first 16M of kernel memory. Any boot info passed from the
+ * bootloader needs to live in this first 16M.
+ *
+ * Requirement on bootloader:
+ * - The page we're executing in needs to reside in TLB1 and
+ * have IPROT=1. If not an invalidate broadcast could
+ * evict the entry we're currently executing in.
+ *
+ * r3 = Index of TLB1 were executing in
+ * r4 = Current MSR[IS]
+ * r5 = Index of TLB1 temp mapping
+ *
+ * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0]
+ * if needed
+ */
+
+/* 1. Find the index of the entry we're executing in */
+ bl invstr /* Find our address */
+invstr: mflr r6 /* Make it accessible */
+ mfmsr r7
+ rlwinm r4,r7,27,31,31 /* extract MSR[IS] */
+ mfspr r7, SPRN_PID0
+ slwi r7,r7,16
+ or r7,r7,r4
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */
+#ifndef CONFIG_E200
+ mfspr r7,SPRN_MAS1
+ andis. r7,r7,MAS1_VALID@h
+ bne match_TLB
+ mfspr r7,SPRN_PID1
+ slwi r7,r7,16
+ or r7,r7,r4
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */
+ mfspr r7,SPRN_MAS1
+ andis. r7,r7,MAS1_VALID@h
+ bne match_TLB
+ mfspr r7, SPRN_PID2
+ slwi r7,r7,16
+ or r7,r7,r4
+ mtspr SPRN_MAS6,r7
+ tlbsx 0,r6 /* Fall through, we had to match */
+#endif
+match_TLB:
+ mfspr r7,SPRN_MAS0
+ rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */
+
+ mfspr r7,SPRN_MAS1 /* Insure IPROT set */
+ oris r7,r7,MAS1_IPROT@h
+ mtspr SPRN_MAS1,r7
+ tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in */
+ mfspr r9,SPRN_TLB1CFG
+ andi. r9,r9,0xfff
+ li r6,0 /* Set Entry counter to 0 */
+1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mfspr r7,SPRN_MAS1
+ rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */
+ cmpw r3,r6
+ beq skpinv /* Dont update the current execution TLB */
+ mtspr SPRN_MAS1,r7
+ tlbwe
+ isync
+skpinv: addi r6,r6,1 /* Increment */
+ cmpw r6,r9 /* Are we done? */
+ bne 1b /* If not, repeat */
+
+ /* Invalidate TLB0 */
+ li r6,0x04
+ tlbivax 0,r6
+#ifdef CONFIG_SMP
+ tlbsync
+#endif
+ /* Invalidate TLB1 */
+ li r6,0x0c
+ tlbivax 0,r6
+#ifdef CONFIG_SMP
+ tlbsync
+#endif
+ msync
+
+/* 3. Setup a temp mapping and jump to it */
+ andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */
+ addi r5, r5, 0x1
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+
+ /* Just modify the entry ID and EPN for the temp mapping */
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
+ mtspr SPRN_MAS0,r7
+ xori r6,r4,1 /* Setup TMP mapping in the other Address space */
+ slwi r6,r6,12
+ oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h
+ ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+ mtspr SPRN_MAS1,r6
+ mfspr r6,SPRN_MAS2
+ li r7,0 /* temp EPN = 0 */
+ rlwimi r7,r6,0,20,31
+ mtspr SPRN_MAS2,r7
+ tlbwe
+
+ xori r6,r4,1
+ slwi r6,r6,5 /* setup new context with other address space */
+ bl 1f /* Find our address */
+1: mflr r9
+ rlwimi r7,r9,0,20,31
+ addi r7,r7,24
+ mtspr SPRN_SRR0,r7
+ mtspr SPRN_SRR1,r6
+ rfi
+
+/* 4. Clear out PIDs & Search info */
+ li r6,0
+ mtspr SPRN_PID0,r6
+#ifndef CONFIG_E200
+ mtspr SPRN_PID1,r6
+ mtspr SPRN_PID2,r6
+#endif
+ mtspr SPRN_MAS6,r6
+
+/* 5. Invalidate mapping we started in */
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ li r6,0
+ mtspr SPRN_MAS1,r6
+ tlbwe
+ /* Invalidate TLB1 */
+ li r9,0x0c
+ tlbivax 0,r9
+#ifdef CONFIG_SMP
+ tlbsync
+#endif
+ msync
+
+/* 6. Setup KERNELBASE mapping in TLB1[0] */
+ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
+ mtspr SPRN_MAS0,r6
+ lis r6,(MAS1_VALID|MAS1_IPROT)@h
+ ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l
+ mtspr SPRN_MAS1,r6
+ li r7,0
+ lis r6,KERNELBASE@h
+ ori r6,r6,KERNELBASE@l
+ rlwimi r6,r7,0,20,31
+ mtspr SPRN_MAS2,r6
+ li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
+ mtspr SPRN_MAS3,r7
+ tlbwe
+
+/* 7. Jump to KERNELBASE mapping */
+ lis r7,MSR_KERNEL@h
+ ori r7,r7,MSR_KERNEL@l
+ bl 1f /* Find our address */
+1: mflr r9
+ rlwimi r6,r9,0,20,31
+ addi r6,r6,24
+ mtspr SPRN_SRR0,r6
+ mtspr SPRN_SRR1,r7
+ rfi /* start execution out of TLB1[0] entry */
+
+/* 8. Clear out the temp mapping */
+ lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
+ mtspr SPRN_MAS0,r7
+ tlbre
+ mtspr SPRN_MAS1,r8
+ tlbwe
+ /* Invalidate TLB1 */
+ li r9,0x0c
+ tlbivax 0,r9
+#ifdef CONFIG_SMP
+ tlbsync
+#endif
+ msync
+
+ /* Establish the interrupt vector offsets */
+ SET_IVOR(0, CriticalInput);
+ SET_IVOR(1, MachineCheck);
+ SET_IVOR(2, DataStorage);
+ SET_IVOR(3, InstructionStorage);
+ SET_IVOR(4, ExternalInput);
+ SET_IVOR(5, Alignment);
+ SET_IVOR(6, Program);
+ SET_IVOR(7, FloatingPointUnavailable);
+ SET_IVOR(8, SystemCall);
+ SET_IVOR(9, AuxillaryProcessorUnavailable);
+ SET_IVOR(10, Decrementer);
+ SET_IVOR(11, FixedIntervalTimer);
+ SET_IVOR(12, WatchdogTimer);
+ SET_IVOR(13, DataTLBError);
+ SET_IVOR(14, InstructionTLBError);
+ SET_IVOR(15, Debug);
+ SET_IVOR(32, SPEUnavailable);
+ SET_IVOR(33, SPEFloatingPointData);
+ SET_IVOR(34, SPEFloatingPointRound);
+#ifndef CONFIG_E200
+ SET_IVOR(35, PerformanceMonitor);
+#endif
+
+ /* Establish the interrupt vector base */
+ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
+ mtspr SPRN_IVPR,r4
+
+ /* Setup the defaults for TLB entries */
+ li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+#ifdef CONFIG_E200
+ oris r2,r2,MAS4_TLBSELD(1)@h
+#endif
+ mtspr SPRN_MAS4, r2
+
+#if 0
+ /* Enable DOZE */
+ mfspr r2,SPRN_HID0
+ oris r2,r2,HID0_DOZE@h
+ mtspr SPRN_HID0, r2
+#endif
+#ifdef CONFIG_E200
+ /* enable dedicated debug exception handling resources (Debug APU) */
+ mfspr r2,SPRN_HID0
+ ori r2,r2,HID0_DAPUEN@l
+ mtspr SPRN_HID0,r2
+#endif
+
+#if !defined(CONFIG_BDI_SWITCH)
+ /*
+ * The Abatron BDI JTAG debugger does not tolerate others
+ * mucking with the debug registers.
+ */
+ lis r2,DBCR0_IDM@h
+ mtspr SPRN_DBCR0,r2
+ /* clear any residual debug events */
+ li r2,-1
+ mtspr SPRN_DBSR,r2
+#endif
+
+ /*
+ * This is where the main kernel code starts.
+ */
+
+ /* ptr to current */
+ lis r2,init_task@h
+ ori r2,r2,init_task@l
+
+ /* ptr to current thread */
+ addi r4,r2,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG3,r4
+
+ /* stack */
+ lis r1,init_thread_union@h
+ ori r1,r1,init_thread_union@l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+
+ bl early_init
+
+ mfspr r3,SPRN_TLB1CFG
+ andi. r3,r3,0xfff
+ lis r4,num_tlbcam_entries@ha
+ stw r3,num_tlbcam_entries@l(r4)
+/*
+ * Decide what sort of machine this is and initialize the MMU.
+ */
+ mr r3,r31
+ mr r4,r30
+ mr r5,r29
+ mr r6,r28
+ mr r7,r27
+ bl machine_init
+ bl MMU_init
+
+ /* Setup PTE pointers for the Abatron bdiGDB */
+ lis r6, swapper_pg_dir@h
+ ori r6, r6, swapper_pg_dir@l
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ lis r4, KERNELBASE@h
+ ori r4, r4, KERNELBASE@l
+ stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */
+ stw r6, 0(r5)
+
+ /* Let's move on */
+ lis r4,start_kernel@h
+ ori r4,r4,start_kernel@l
+ lis r3,MSR_KERNEL@h
+ ori r3,r3,MSR_KERNEL@l
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ rfi /* change context and jump to start_kernel */
+
+/* Macros to hide the PTE size differences
+ *
+ * FIND_PTE -- walks the page tables given EA & pgdir pointer
+ * r10 -- EA of fault
+ * r11 -- PGDIR pointer
+ * r12 -- free
+ * label 2: is the bailout case
+ *
+ * if we find the pte (fall through):
+ * r11 is low pte word
+ * r12 is pointer to the pte
+ */
+#ifdef CONFIG_PTE_64BIT
+#define PTE_FLAGS_OFFSET 4
+#define FIND_PTE \
+ rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \
+ lwzx r11, r12, r11; /* Get pgd/pmd entry */ \
+ rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \
+ beq 2f; /* Bail if no table */ \
+ rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \
+ lwz r11, 4(r12); /* Get pte entry */
+#else
+#define PTE_FLAGS_OFFSET 0
+#define FIND_PTE \
+ rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \
+ lwz r11, 0(r11); /* Get L1 entry */ \
+ rlwinm. r12, r11, 0, 0, 19; /* Extract L2 (pte) base address */ \
+ beq 2f; /* Bail if no table */ \
+ rlwimi r12, r10, 22, 20, 29; /* Compute PTE address */ \
+ lwz r11, 0(r12); /* Get Linux PTE */
+#endif
+
+/*
+ * Interrupt vector entry code
+ *
+ * The Book E MMUs are always on so we don't need to handle
+ * interrupts in real mode as with previous PPC processors. In
+ * this case we handle interrupts in the kernel virtual address
+ * space.
+ *
+ * Interrupt vectors are dynamically placed relative to the
+ * interrupt prefix as determined by the address of interrupt_base.
+ * The interrupt vectors offsets are programmed using the labels
+ * for each interrupt vector entry.
+ *
+ * Interrupt vectors must be aligned on a 16 byte boundary.
+ * We align on a 32 byte cache line boundary for good measure.
+ */
+
+interrupt_base:
+ /* Critical Input Interrupt */
+ CRITICAL_EXCEPTION(0x0100, CriticalInput, UnknownException)
+
+ /* Machine Check Interrupt */
+#ifdef CONFIG_E200
+ /* no RFMCI, MCSRRs on E200 */
+ CRITICAL_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+#else
+ MCHECK_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+#endif
+
+ /* Data Storage Interrupt */
+ START_EXCEPTION(DataStorage)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
+ mfcr r11
+ mtspr SPRN_SPRG7W, r11
+
+ /*
+ * Check if it was a store fault, if not then bail
+ * because a user tried to access a kernel or
+ * read-protected page. Otherwise, get the
+ * offending address and handle it.
+ */
+ mfspr r10, SPRN_ESR
+ andis. r10, r10, ESR_ST@h
+ beq 2f
+
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ ori r11, r11, TASK_SIZE@l
+ cmplw 0, r10, r11
+ bge 2f
+
+ /* Get the PGD for the current thread */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+4:
+ FIND_PTE
+
+ /* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
+ andi. r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
+ cmpwi 0, r13, _PAGE_RW|_PAGE_USER
+ bne 2f /* Bail if not */
+
+ /* Update 'changed'. */
+ ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+ stw r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
+
+ /* MAS2 not updated as the entry does exist in the tlb, this
+ fault taken to detect state transition (eg: COW -> DIRTY)
+ */
+ andi. r11, r11, _PAGE_HWEXEC
+ rlwimi r11, r11, 31, 27, 27 /* SX <- _PAGE_HWEXEC */
+ ori r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
+
+ /* update search PID in MAS6, AS = 0 */
+ mfspr r12, SPRN_PID0
+ slwi r12, r12, 16
+ mtspr SPRN_MAS6, r12
+
+ /* find the TLB index that caused the fault. It has to be here. */
+ tlbsx 0, r10
+
+ /* only update the perm bits, assume the RPN is fine */
+ mfspr r12, SPRN_MAS3
+ rlwimi r12, r11, 0, 20, 31
+ mtspr SPRN_MAS3,r12
+ tlbwe
+
+ /* Done...restore registers and get out of here. */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ rfi /* Force context change */
+
+2:
+ /*
+ * The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b data_access
+
+ /* Instruction Storage Interrupt */
+ INSTRUCTION_STORAGE_EXCEPTION
+
+ /* External Input Interrupt */
+ EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
+
+ /* Alignment Interrupt */
+ ALIGNMENT_EXCEPTION
+
+ /* Program Interrupt */
+ PROGRAM_EXCEPTION
+
+ /* Floating Point Unavailable Interrupt */
+#ifdef CONFIG_PPC_FPU
+ FP_UNAVAILABLE_EXCEPTION
+#else
+#ifdef CONFIG_E200
+ /* E200 treats 'normal' floating point instructions as FP Unavail exception */
+ EXCEPTION(0x0800, FloatingPointUnavailable, ProgramCheckException, EXC_XFER_EE)
+#else
+ EXCEPTION(0x0800, FloatingPointUnavailable, UnknownException, EXC_XFER_EE)
+#endif
+#endif
+
+ /* System Call Interrupt */
+ START_EXCEPTION(SystemCall)
+ NORMAL_EXCEPTION_PROLOG
+ EXC_XFER_EE_LITE(0x0c00, DoSyscall)
+
+ /* Auxillary Processor Unavailable Interrupt */
+ EXCEPTION(0x2900, AuxillaryProcessorUnavailable, UnknownException, EXC_XFER_EE)
+
+ /* Decrementer Interrupt */
+ DECREMENTER_EXCEPTION
+
+ /* Fixed Internal Timer Interrupt */
+ /* TODO: Add FIT support */
+ EXCEPTION(0x3100, FixedIntervalTimer, UnknownException, EXC_XFER_EE)
+
+ /* Watchdog Timer Interrupt */
+#ifdef CONFIG_BOOKE_WDT
+ CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException)
+#else
+ CRITICAL_EXCEPTION(0x3200, WatchdogTimer, UnknownException)
+#endif
+
+ /* Data TLB Error Interrupt */
+ START_EXCEPTION(DataTLBError)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
+ mfcr r11
+ mtspr SPRN_SPRG7W, r11
+ mfspr r10, SPRN_DEAR /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ ori r11, r11, TASK_SIZE@l
+ cmplw 5, r10, r11
+ blt 5, 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+
+ mfspr r12,SPRN_MAS1 /* Set TID to 0 */
+ rlwinm r12,r12,0,16,1
+ mtspr SPRN_MAS1,r12
+
+ b 4f
+
+ /* Get the PGD for the current thread */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+
+4:
+ FIND_PTE
+ andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
+ beq 2f /* Bail if not present */
+
+#ifdef CONFIG_PTE_64BIT
+ lwz r13, 0(r12)
+#endif
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, PTE_FLAGS_OFFSET(r12)
+
+ /* Jump to common tlb load */
+ b finish_tlb_load
+2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b data_access
+
+ /* Instruction TLB Error Interrupt */
+ /*
+ * Nearly the same as above, except we get our
+ * information from different registers and bailout
+ * to a different point.
+ */
+ START_EXCEPTION(InstructionTLBError)
+ mtspr SPRN_SPRG0, r10 /* Save some working registers */
+ mtspr SPRN_SPRG1, r11
+ mtspr SPRN_SPRG4W, r12
+ mtspr SPRN_SPRG5W, r13
+ mfcr r11
+ mtspr SPRN_SPRG7W, r11
+ mfspr r10, SPRN_SRR0 /* Get faulting address */
+
+ /* If we are faulting a kernel address, we have to use the
+ * kernel page tables.
+ */
+ lis r11, TASK_SIZE@h
+ ori r11, r11, TASK_SIZE@l
+ cmplw 5, r10, r11
+ blt 5, 3f
+ lis r11, swapper_pg_dir@h
+ ori r11, r11, swapper_pg_dir@l
+
+ mfspr r12,SPRN_MAS1 /* Set TID to 0 */
+ rlwinm r12,r12,0,16,1
+ mtspr SPRN_MAS1,r12
+
+ b 4f
+
+ /* Get the PGD for the current thread */
+3:
+ mfspr r11,SPRN_SPRG3
+ lwz r11,PGDIR(r11)
+
+4:
+ FIND_PTE
+ andi. r13, r11, _PAGE_PRESENT /* Is the page present? */
+ beq 2f /* Bail if not present */
+
+#ifdef CONFIG_PTE_64BIT
+ lwz r13, 0(r12)
+#endif
+ ori r11, r11, _PAGE_ACCESSED
+ stw r11, PTE_FLAGS_OFFSET(r12)
+
+ /* Jump to common TLB load point */
+ b finish_tlb_load
+
+2:
+ /* The bailout. Restore registers to pre-exception conditions
+ * and call the heavyweights to help us out.
+ */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ b InstructionStorage
+
+#ifdef CONFIG_SPE
+ /* SPE Unavailable */
+ START_EXCEPTION(SPEUnavailable)
+ NORMAL_EXCEPTION_PROLOG
+ bne load_up_spe
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE_LITE(0x2010, KernelSPE)
+#else
+ EXCEPTION(0x2020, SPEUnavailable, UnknownException, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
+
+ /* SPE Floating Point Data */
+#ifdef CONFIG_SPE
+ EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
+#else
+ EXCEPTION(0x2040, SPEFloatingPointData, UnknownException, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
+
+ /* SPE Floating Point Round */
+ EXCEPTION(0x2050, SPEFloatingPointRound, UnknownException, EXC_XFER_EE)
+
+ /* Performance Monitor */
+ EXCEPTION(0x2060, PerformanceMonitor, PerformanceMonitorException, EXC_XFER_STD)
+
+
+ /* Debug Interrupt */
+ DEBUG_EXCEPTION
+
+/*
+ * Local functions
+ */
+
+ /*
+ * Data TLB exceptions will bail out to this point
+ * if they can't resolve the lightweight TLB fault.
+ */
+data_access:
+ NORMAL_EXCEPTION_PROLOG
+ mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */
+ stw r5,_ESR(r11)
+ mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */
+ andis. r10,r5,(ESR_ILK|ESR_DLK)@h
+ bne 1f
+ EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ EXC_XFER_EE_LITE(0x0300, CacheLockingException)
+
+/*
+
+ * Both the instruction and data TLB miss get to this
+ * point to load the TLB.
+ * r10 - EA of fault
+ * r11 - TLB (info from Linux PTE)
+ * r12, r13 - available to use
+ * CR5 - results of addr < TASK_SIZE
+ * MAS0, MAS1 - loaded with proper value when we get here
+ * MAS2, MAS3 - will need additional info from Linux PTE
+ * Upon exit, we reload everything and RFI.
+ */
+finish_tlb_load:
+ /*
+ * We set execute, because we don't have the granularity to
+ * properly set this at the page level (Linux problem).
+ * Many of these bits are software only. Bits we don't set
+ * here we (properly should) assume have the appropriate value.
+ */
+
+ mfspr r12, SPRN_MAS2
+#ifdef CONFIG_PTE_64BIT
+ rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */
+#else
+ rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
+#endif
+ mtspr SPRN_MAS2, r12
+
+ bge 5, 1f
+
+ /* is user addr */
+ andi. r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+ andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */
+ srwi r10, r12, 1
+ or r12, r12, r10 /* Copy user perms into supervisor */
+ iseleq r12, 0, r12
+ b 2f
+
+ /* is kernel addr */
+1: rlwinm r12, r11, 31, 29, 29 /* Extract _PAGE_HWWRITE into SW */
+ ori r12, r12, (MAS3_SX | MAS3_SR)
+
+#ifdef CONFIG_PTE_64BIT
+2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
+ rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */
+ mtspr SPRN_MAS3, r12
+BEGIN_FTR_SECTION
+ srwi r10, r13, 8 /* grab RPN[8:31] */
+ mtspr SPRN_MAS7, r10
+END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS)
+#else
+2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
+ mtspr SPRN_MAS3, r11
+#endif
+#ifdef CONFIG_E200
+ /* Round robin TLB1 entries assignment */
+ mfspr r12, SPRN_MAS0
+
+ /* Extract TLB1CFG(NENTRY) */
+ mfspr r11, SPRN_TLB1CFG
+ andi. r11, r11, 0xfff
+
+ /* Extract MAS0(NV) */
+ andi. r13, r12, 0xfff
+ addi r13, r13, 1
+ cmpw 0, r13, r11
+ addi r12, r12, 1
+
+ /* check if we need to wrap */
+ blt 7f
+
+ /* wrap back to first free tlbcam entry */
+ lis r13, tlbcam_index@ha
+ lwz r13, tlbcam_index@l(r13)
+ rlwimi r12, r13, 0, 20, 31
+7:
+ mtspr SPRN_MAS0,r12
+#endif /* CONFIG_E200 */
+
+ tlbwe
+
+ /* Done...restore registers and get out of here. */
+ mfspr r11, SPRN_SPRG7R
+ mtcr r11
+ mfspr r13, SPRN_SPRG5R
+ mfspr r12, SPRN_SPRG4R
+ mfspr r11, SPRN_SPRG1
+ mfspr r10, SPRN_SPRG0
+ rfi /* Force context change */
+
+#ifdef CONFIG_SPE
+/* Note that the SPE support is closely modeled after the AltiVec
+ * support. Changes to one are likely to be applicable to the
+ * other! */
+load_up_spe:
+/*
+ * Disable SPE for the task which had SPE previously,
+ * and save its SPE registers in its thread_struct.
+ * Enables SPE for use in the kernel on return.
+ * On SMP we know the SPE units are free, since we give it up every
+ * switch. -- Kumar
+ */
+ mfmsr r5
+ oris r5,r5,MSR_SPE@h
+ mtmsr r5 /* enable use of SPE now */
+ isync
+/*
+ * For SMP, we don't do lazy SPE switching because it just gets too
+ * horrendously complex, especially when a task switches from one CPU
+ * to another. Instead we call giveup_spe in switch_to.
+ */
+#ifndef CONFIG_SMP
+ lis r3,last_task_used_spe@ha
+ lwz r4,last_task_used_spe@l(r3)
+ cmpi 0,r4,0
+ beq 1f
+ addi r4,r4,THREAD /* want THREAD of last_task_used_spe */
+ SAVE_32EVRS(0,r10,r4)
+ evxor evr10, evr10, evr10 /* clear out evr10 */
+ evmwumiaa evr10, evr10, evr10 /* evr10 <- ACC = 0 * 0 + ACC */
+ li r5,THREAD_ACC
+ evstddx evr10, r4, r5 /* save off accumulator */
+ lwz r5,PT_REGS(r4)
+ lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r10,MSR_SPE@h
+ andc r4,r4,r10 /* disable SPE for previous task */
+ stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+ /* enable use of SPE after return */
+ oris r9,r9,MSR_SPE@h
+ mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */
+ li r4,1
+ li r10,THREAD_ACC
+ stw r4,THREAD_USED_SPE(r5)
+ evlddx evr4,r10,r5
+ evmra evr4,evr4
+ REST_32EVRS(0,r10,r5)
+#ifndef CONFIG_SMP
+ subi r4,r5,THREAD
+ stw r4,last_task_used_spe@l(r3)
+#endif /* CONFIG_SMP */
+ /* restore registers and return */
+2: REST_4GPRS(3, r11)
+ lwz r10,_CCR(r11)
+ REST_GPR(1, r11)
+ mtcr r10
+ lwz r10,_LINK(r11)
+ mtlr r10
+ REST_GPR(10, r11)
+ mtspr SPRN_SRR1,r9
+ mtspr SPRN_SRR0,r12
+ REST_GPR(9, r11)
+ REST_GPR(12, r11)
+ lwz r11,GPR11(r11)
+ SYNC
+ rfi
+
+/*
+ * SPE unavailable trap from kernel - print a message, but let
+ * the task use SPE in the kernel until it returns to user mode.
+ */
+KernelSPE:
+ lwz r3,_MSR(r1)
+ oris r3,r3,MSR_SPE@h
+ stw r3,_MSR(r1) /* enable use of SPE after return */
+ lis r3,87f@h
+ ori r3,r3,87f@l
+ mr r4,r2 /* current */
+ lwz r5,_NIP(r1)
+ bl printk
+ b ret_from_except
+87: .string "SPE used in kernel (task=%p, pc=%x) \n"
+ .align 4,0
+
+#endif /* CONFIG_SPE */
+
+/*
+ * Global functions
+ */
+
+/*
+ * extern void loadcam_entry(unsigned int index)
+ *
+ * Load TLBCAM[index] entry in to the L2 CAM MMU
+ */
+_GLOBAL(loadcam_entry)
+ lis r4,TLBCAM@ha
+ addi r4,r4,TLBCAM@l
+ mulli r5,r3,20
+ add r3,r5,r4
+ lwz r4,0(r3)
+ mtspr SPRN_MAS0,r4
+ lwz r4,4(r3)
+ mtspr SPRN_MAS1,r4
+ lwz r4,8(r3)
+ mtspr SPRN_MAS2,r4
+ lwz r4,12(r3)
+ mtspr SPRN_MAS3,r4
+ tlbwe
+ isync
+ blr
+
+/*
+ * extern void giveup_altivec(struct task_struct *prev)
+ *
+ * The e500 core does not have an AltiVec unit.
+ */
+_GLOBAL(giveup_altivec)
+ blr
+
+#ifdef CONFIG_SPE
+/*
+ * extern void giveup_spe(struct task_struct *prev)
+ *
+ */
+_GLOBAL(giveup_spe)
+ mfmsr r5
+ oris r5,r5,MSR_SPE@h
+ SYNC
+ mtmsr r5 /* enable use of SPE now */
+ isync
+ cmpi 0,r3,0
+ beqlr- /* if no previous owner, done */
+ addi r3,r3,THREAD /* want THREAD of task */
+ lwz r5,PT_REGS(r3)
+ cmpi 0,r5,0
+ SAVE_32EVRS(0, r4, r3)
+ evxor evr6, evr6, evr6 /* clear out evr6 */
+ evmwumiaa evr6, evr6, evr6 /* evr6 <- ACC = 0 * 0 + ACC */
+ li r4,THREAD_ACC
+ evstddx evr6, r4, r3 /* save off accumulator */
+ mfspr r6,SPRN_SPEFSCR
+ stw r6,THREAD_SPEFSCR(r3) /* save spefscr register value */
+ beq 1f
+ lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+ lis r3,MSR_SPE@h
+ andc r4,r4,r3 /* disable SPE for previous task */
+ stw r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+ li r5,0
+ lis r4,last_task_used_spe@ha
+ stw r5,last_task_used_spe@l(r4)
+#endif /* CONFIG_SMP */
+ blr
+#endif /* CONFIG_SPE */
+
+/*
+ * extern void giveup_fpu(struct task_struct *prev)
+ *
+ * Not all FSL Book-E cores have an FPU
+ */
+#ifndef CONFIG_PPC_FPU
+_GLOBAL(giveup_fpu)
+ blr
+#endif
+
+/*
+ * extern void abort(void)
+ *
+ * At present, this routine just applies a system reset.
+ */
+_GLOBAL(abort)
+ li r13,0
+ mtspr SPRN_DBCR0,r13 /* disable all debug events */
+ mfmsr r13
+ ori r13,r13,MSR_DE@l /* Enable Debug Events */
+ mtmsr r13
+ mfspr r13,SPRN_DBCR0
+ lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h
+ mtspr SPRN_DBCR0,r13
+
+_GLOBAL(set_context)
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Context switch the PTE pointer for the Abatron BDI2000.
+ * The PGDIR is the second parameter.
+ */
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r4, 0x4(r5)
+#endif
+ mtspr SPRN_PID,r3
+ isync /* Force context change */
+ blr
+
+/*
+ * We put a few things here that have to be page-aligned. This stuff
+ * goes at the beginning of the data segment, which is page-aligned.
+ */
+ .data
+_GLOBAL(sdata)
+_GLOBAL(empty_zero_page)
+ .space 4096
+_GLOBAL(swapper_pg_dir)
+ .space 4096
+
+/* Reserved 4k for the critical exception stack & 4k for the machine
+ * check stack per CPU for kernel mode exceptions */
+ .section .bss
+ .align 12
+exception_stack_bottom:
+ .space BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
+_GLOBAL(exception_stack_top)
+
+/*
+ * This space gets a copy of optional info passed to us by the bootstrap
+ * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
+ */
+_GLOBAL(cmd_line)
+ .space 512
+
+/*
+ * Room for two PTE pointers, usually the kernel and current user pointers
+ * to their respective root page table.
+ */
+abatron_pteptrs:
+ .space 8
+
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
new file mode 100644
index 0000000..1a2194c
--- /dev/null
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -0,0 +1,233 @@
+/*
+ * This file contains the power_save function for 6xx & 7xxx CPUs
+ * rewritten in assembler
+ *
+ * Warning ! This code assumes that if your machine has a 750fx
+ * it will have PLL 1 set to low speed mode (used during NAP/DOZE).
+ * if this is not the case some additional changes will have to
+ * be done to check a runtime var (a bit like powersave-nap)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#undef DEBUG
+
+ .text
+
+/*
+ * Init idle, called at early CPU setup time from head.S for each CPU
+ * Make sure no rest of NAP mode remains in HID0, save default
+ * values for some CPU specific registers. Called with r24
+ * containing CPU number and r3 reloc offset
+ */
+_GLOBAL(init_idle_6xx)
+BEGIN_FTR_SECTION
+ mfspr r4,SPRN_HID0
+ rlwinm r4,r4,0,10,8 /* Clear NAP */
+ mtspr SPRN_HID0, r4
+ b 1f
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+ blr
+1:
+ slwi r5,r24,2
+ add r5,r5,r3
+BEGIN_FTR_SECTION
+ mfspr r4,SPRN_MSSCR0
+ addis r6,r5, nap_save_msscr0@ha
+ stw r4,nap_save_msscr0@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+ mfspr r4,SPRN_HID1
+ addis r6,r5,nap_save_hid1@ha
+ stw r4,nap_save_hid1@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+ blr
+
+/*
+ * Here is the power_save_6xx function. This could eventually be
+ * split into several functions & changing the function pointer
+ * depending on the various features.
+ */
+_GLOBAL(ppc6xx_idle)
+ /* Check if we can nap or doze, put HID0 mask in r3
+ */
+ lis r3, 0
+BEGIN_FTR_SECTION
+ lis r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+ /* We must dynamically check for the NAP feature as it
+ * can be cleared by CPU init after the fixups are done
+ */
+ lis r4,cur_cpu_spec@ha
+ lwz r4,cur_cpu_spec@l(r4)
+ lwz r4,CPU_SPEC_FEATURES(r4)
+ andi. r0,r4,CPU_FTR_CAN_NAP
+ beq 1f
+ /* Now check if user or arch enabled NAP mode */
+ lis r4,powersave_nap@ha
+ lwz r4,powersave_nap@l(r4)
+ cmpwi 0,r4,0
+ beq 1f
+ lis r3,HID0_NAP@h
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+ cmpwi 0,r3,0
+ beqlr
+
+ /* Clear MSR:EE */
+ mfmsr r7
+ rlwinm r0,r7,0,17,15
+ mtmsr r0
+
+ /* Check current_thread_info()->flags */
+ rlwinm r4,r1,0,0,18
+ lwz r4,TI_FLAGS(r4)
+ andi. r0,r4,_TIF_NEED_RESCHED
+ beq 1f
+ mtmsr r7 /* out of line this ? */
+ blr
+1:
+ /* Some pre-nap cleanups needed on some CPUs */
+ andis. r0,r3,HID0_NAP@h
+ beq 2f
+BEGIN_FTR_SECTION
+ /* Disable L2 prefetch on some 745x and try to ensure
+ * L2 prefetch engines are idle. As explained by errata
+ * text, we can't be sure they are, we just hope very hard
+ * that well be enough (sic !). At least I noticed Apple
+ * doesn't even bother doing the dcbf's here...
+ */
+ mfspr r4,SPRN_MSSCR0
+ rlwinm r4,r4,0,0,29
+ sync
+ mtspr SPRN_MSSCR0,r4
+ sync
+ isync
+ lis r4,KERNELBASE@h
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+#ifdef DEBUG
+ lis r6,nap_enter_count@ha
+ lwz r4,nap_enter_count@l(r6)
+ addi r4,r4,1
+ stw r4,nap_enter_count@l(r6)
+#endif
+2:
+BEGIN_FTR_SECTION
+ /* Go to low speed mode on some 750FX */
+ lis r4,powersave_lowspeed@ha
+ lwz r4,powersave_lowspeed@l(r4)
+ cmpwi 0,r4,0
+ beq 1f
+ mfspr r4,SPRN_HID1
+ oris r4,r4,0x0001
+ mtspr SPRN_HID1,r4
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+
+ /* Go to NAP or DOZE now */
+ mfspr r4,SPRN_HID0
+ lis r5,(HID0_NAP|HID0_SLEEP)@h
+BEGIN_FTR_SECTION
+ oris r5,r5,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+ andc r4,r4,r5
+ or r4,r4,r3
+BEGIN_FTR_SECTION
+ oris r4,r4,HID0_DPM@h /* that should be done once for all */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+ mtspr SPRN_HID0,r4
+BEGIN_FTR_SECTION
+ DSSALL
+ sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+ ori r7,r7,MSR_EE /* Could be ommited (already set) */
+ oris r7,r7,MSR_POW@h
+ sync
+ isync
+ mtmsr r7
+ isync
+ sync
+ blr
+
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * we are called with DR/IR still off and r2 containing physical
+ * address of current.
+ */
+_GLOBAL(power_save_6xx_restore)
+ mfspr r11,SPRN_HID0
+ rlwinm. r11,r11,0,10,8 /* Clear NAP & copy NAP bit !state to cr1 EQ */
+ cror 4*cr1+eq,4*cr0+eq,4*cr0+eq
+BEGIN_FTR_SECTION
+ rlwinm r11,r11,0,9,7 /* Clear DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+ mtspr SPRN_HID0, r11
+
+#ifdef DEBUG
+ beq cr1,1f
+ lis r11,(nap_return_count-KERNELBASE)@ha
+ lwz r9,nap_return_count@l(r11)
+ addi r9,r9,1
+ stw r9,nap_return_count@l(r11)
+1:
+#endif
+
+ rlwinm r9,r1,0,0,18
+ tophys(r9,r9)
+ lwz r11,TI_CPU(r9)
+ slwi r11,r11,2
+ /* Todo make sure all these are in the same page
+ * and load r22 (@ha part + CPU offset) only once
+ */
+BEGIN_FTR_SECTION
+ beq cr1,1f
+ addis r9,r11,(nap_save_msscr0-KERNELBASE)@ha
+ lwz r9,nap_save_msscr0@l(r9)
+ mtspr SPRN_MSSCR0, r9
+ sync
+ isync
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+ addis r9,r11,(nap_save_hid1-KERNELBASE)@ha
+ lwz r9,nap_save_hid1@l(r9)
+ mtspr SPRN_HID1, r9
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+ b transfer_to_handler_cont
+
+ .data
+
+_GLOBAL(nap_save_msscr0)
+ .space 4*NR_CPUS
+
+_GLOBAL(nap_save_hid1)
+ .space 4*NR_CPUS
+
+_GLOBAL(powersave_nap)
+ .long 0
+_GLOBAL(powersave_lowspeed)
+ .long 0
+
+#ifdef DEBUG
+_GLOBAL(nap_enter_count)
+ .space 4
+_GLOBAL(nap_return_count)
+ .space 4
+#endif
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
new file mode 100644
index 0000000..f5a9d2a
--- /dev/null
+++ b/arch/powerpc/kernel/process.c
@@ -0,0 +1,724 @@
+/*
+ * arch/ppc/kernel/process.c
+ *
+ * Derived from "arch/i386/kernel/process.c"
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Updated and modified by Cort Dougan (cort@cs.nmt.edu) and
+ * Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/elf.h>
+#include <linux/init.h>
+#include <linux/prctl.h>
+#include <linux/init_task.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
+#include <linux/mqueue.h>
+#include <linux/hardirq.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/prom.h>
+
+extern unsigned long _get_SP(void);
+
+#ifndef CONFIG_SMP
+struct task_struct *last_task_used_math = NULL;
+struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_spe = NULL;
+#endif
+
+static struct fs_struct init_fs = INIT_FS;
+static struct files_struct init_files = INIT_FILES;
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+/* this is 8kB-aligned so we can get to the thread_info struct
+ at the base of it from the stack pointer with 1 integer instruction. */
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+{ INIT_THREAD_INFO(init_task) };
+
+/* initial task structure */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
+
+/* only used to get secondary processor up */
+struct task_struct *current_set[NR_CPUS] = {&init_task, };
+
+/*
+ * Make sure the floating-point register state in the
+ * the thread_struct is up to date for task tsk.
+ */
+void flush_fp_to_thread(struct task_struct *tsk)
+{
+ if (tsk->thread.regs) {
+ /*
+ * We need to disable preemption here because if we didn't,
+ * another process could get scheduled after the regs->msr
+ * test but before we have finished saving the FP registers
+ * to the thread_struct. That process could take over the
+ * FPU, and then when we get scheduled again we would store
+ * bogus values for the remaining FP registers.
+ */
+ preempt_disable();
+ if (tsk->thread.regs->msr & MSR_FP) {
+#ifdef CONFIG_SMP
+ /*
+ * This should only ever be called for current or
+ * for a stopped child process. Since we save away
+ * the FP register state on context switch on SMP,
+ * there is something wrong if a stopped child appears
+ * to still have its FP state in the CPU registers.
+ */
+ BUG_ON(tsk != current);
+#endif
+ giveup_fpu(current);
+ }
+ preempt_enable();
+ }
+}
+
+void enable_kernel_fp(void)
+{
+ WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+ if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
+ giveup_fpu(current);
+ else
+ giveup_fpu(NULL); /* just enables FP for kernel */
+#else
+ giveup_fpu(last_task_used_math);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_fp);
+
+int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
+{
+ if (!tsk->thread.regs)
+ return 0;
+ flush_fp_to_thread(current);
+
+ memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
+
+ return 1;
+}
+
+#ifdef CONFIG_ALTIVEC
+void enable_kernel_altivec(void)
+{
+ WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+ if (current->thread.regs && (current->thread.regs->msr & MSR_VEC))
+ giveup_altivec(current);
+ else
+ giveup_altivec(NULL); /* just enable AltiVec for kernel - force */
+#else
+ giveup_altivec(last_task_used_altivec);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_altivec);
+
+/*
+ * Make sure the VMX/Altivec register state in the
+ * the thread_struct is up to date for task tsk.
+ */
+void flush_altivec_to_thread(struct task_struct *tsk)
+{
+ if (tsk->thread.regs) {
+ preempt_disable();
+ if (tsk->thread.regs->msr & MSR_VEC) {
+#ifdef CONFIG_SMP
+ BUG_ON(tsk != current);
+#endif
+ giveup_altivec(current);
+ }
+ preempt_enable();
+ }
+}
+
+int dump_task_altivec(struct pt_regs *regs, elf_vrregset_t *vrregs)
+{
+ flush_altivec_to_thread(current);
+ memcpy(vrregs, ¤t->thread.vr[0], sizeof(*vrregs));
+ return 1;
+}
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_SPE
+
+void enable_kernel_spe(void)
+{
+ WARN_ON(preemptible());
+
+#ifdef CONFIG_SMP
+ if (current->thread.regs && (current->thread.regs->msr & MSR_SPE))
+ giveup_spe(current);
+ else
+ giveup_spe(NULL); /* just enable SPE for kernel - force */
+#else
+ giveup_spe(last_task_used_spe);
+#endif /* __SMP __ */
+}
+EXPORT_SYMBOL(enable_kernel_spe);
+
+void flush_spe_to_thread(struct task_struct *tsk)
+{
+ if (tsk->thread.regs) {
+ preempt_disable();
+ if (tsk->thread.regs->msr & MSR_SPE) {
+#ifdef CONFIG_SMP
+ BUG_ON(tsk != current);
+#endif
+ giveup_spe(current);
+ }
+ preempt_enable();
+ }
+}
+
+int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
+{
+ flush_spe_to_thread(current);
+ /* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
+ memcpy(evrregs, ¤t->thread.evr[0], sizeof(u32) * 35);
+ return 1;
+}
+#endif /* CONFIG_SPE */
+
+static void set_dabr_spr(unsigned long val)
+{
+ mtspr(SPRN_DABR, val);
+}
+
+int set_dabr(unsigned long dabr)
+{
+ int ret = 0;
+
+#ifdef CONFIG_PPC64
+ if (firmware_has_feature(FW_FEATURE_XDABR)) {
+ /* We want to catch accesses from kernel and userspace */
+ unsigned long flags = H_DABRX_KERNEL|H_DABRX_USER;
+ ret = plpar_set_xdabr(dabr, flags);
+ } else if (firmware_has_feature(FW_FEATURE_DABR)) {
+ ret = plpar_set_dabr(dabr);
+ } else
+#endif
+ set_dabr_spr(dabr);
+
+ return ret;
+}
+
+static DEFINE_PER_CPU(unsigned long, current_dabr);
+
+struct task_struct *__switch_to(struct task_struct *prev,
+ struct task_struct *new)
+{
+ struct thread_struct *new_thread, *old_thread;
+ unsigned long flags;
+ struct task_struct *last;
+
+#ifdef CONFIG_SMP
+ /* avoid complexity of lazy save/restore of fpu
+ * by just saving it every time we switch out if
+ * this task used the fpu during the last quantum.
+ *
+ * If it tries to use the fpu again, it'll trap and
+ * reload its fp regs. So we don't have to do a restore
+ * every switch, just a save.
+ * -- Cort
+ */
+ if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
+ giveup_fpu(prev);
+#ifdef CONFIG_ALTIVEC
+ /*
+ * If the previous thread used altivec in the last quantum
+ * (thus changing altivec regs) then save them.
+ * We used to check the VRSAVE register but not all apps
+ * set it, so we don't rely on it now (and in fact we need
+ * to save & restore VSCR even if VRSAVE == 0). -- paulus
+ *
+ * On SMP we always save/restore altivec regs just to avoid the
+ * complexity of changing processors.
+ * -- Cort
+ */
+ if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
+ giveup_altivec(prev);
+ /* Avoid the trap. On smp this this never happens since
+ * we don't set last_task_used_altivec -- Cort
+ */
+ if (new->thread.regs && last_task_used_altivec == new)
+ new->thread.regs->msr |= MSR_VEC;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ /*
+ * If the previous thread used spe in the last quantum
+ * (thus changing spe regs) then save them.
+ *
+ * On SMP we always save/restore spe regs just to avoid the
+ * complexity of changing processors.
+ */
+ if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE)))
+ giveup_spe(prev);
+ /* Avoid the trap. On smp this this never happens since
+ * we don't set last_task_used_spe
+ */
+ if (new->thread.regs && last_task_used_spe == new)
+ new->thread.regs->msr |= MSR_SPE;
+#endif /* CONFIG_SPE */
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC64 /* for now */
+ if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
+ set_dabr(new->thread.dabr);
+ __get_cpu_var(current_dabr) = new->thread.dabr;
+ }
+#endif
+
+ new_thread = &new->thread;
+ old_thread = ¤t->thread;
+ local_irq_save(flags);
+ last = _switch(old_thread, new_thread);
+
+ local_irq_restore(flags);
+
+ return last;
+}
+
+void show_regs(struct pt_regs * regs)
+{
+ int i, trap;
+
+ printk("NIP: %08lX LR: %08lX SP: %08lX REGS: %p TRAP: %04lx %s\n",
+ regs->nip, regs->link, regs->gpr[1], regs, regs->trap,
+ print_tainted());
+ printk("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+ regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+ regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+ regs->msr&MSR_IR ? 1 : 0,
+ regs->msr&MSR_DR ? 1 : 0);
+ trap = TRAP(regs);
+ if (trap == 0x300 || trap == 0x600)
+ printk("DAR: %08lX, DSISR: %08lX\n", regs->dar, regs->dsisr);
+ printk("TASK = %p[%d] '%s' THREAD: %p\n",
+ current, current->pid, current->comm, current->thread_info);
+ printk("Last syscall: %ld ", current->thread.last_syscall);
+
+#ifdef CONFIG_SMP
+ printk(" CPU: %d", smp_processor_id());
+#endif /* CONFIG_SMP */
+
+ for (i = 0; i < 32; i++) {
+ long r;
+ if ((i % 8) == 0)
+ printk("\n" KERN_INFO "GPR%02d: ", i);
+ if (__get_user(r, ®s->gpr[i]))
+ break;
+ printk("%08lX ", r);
+ if (i == 12 && !FULL_REGS(regs))
+ break;
+ }
+ printk("\n");
+#ifdef CONFIG_KALLSYMS
+ /*
+ * Lookup NIP late so we have the best change of getting the
+ * above info out without failing
+ */
+ printk("NIP [%08lx] ", regs->nip);
+ print_symbol("%s\n", regs->nip);
+ printk("LR [%08lx] ", regs->link);
+ print_symbol("%s\n", regs->link);
+#endif
+ show_stack(current, (unsigned long *) regs->gpr[1]);
+}
+
+void exit_thread(void)
+{
+#ifndef CONFIG_SMP
+ if (last_task_used_math == current)
+ last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+ if (last_task_used_altivec == current)
+ last_task_used_altivec = NULL;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ if (last_task_used_spe == current)
+ last_task_used_spe = NULL;
+#endif
+#endif /* CONFIG_SMP */
+}
+
+void flush_thread(void)
+{
+#ifndef CONFIG_SMP
+ if (last_task_used_math == current)
+ last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+ if (last_task_used_altivec == current)
+ last_task_used_altivec = NULL;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ if (last_task_used_spe == current)
+ last_task_used_spe = NULL;
+#endif
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC64 /* for now */
+ if (current->thread.dabr) {
+ current->thread.dabr = 0;
+ set_dabr(0);
+ }
+#endif
+}
+
+void
+release_thread(struct task_struct *t)
+{
+}
+
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+ flush_fp_to_thread(current);
+ flush_altivec_to_thread(current);
+ flush_spe_to_thread(current);
+}
+
+/*
+ * Copy a thread..
+ */
+int
+copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+ unsigned long unused,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs, *kregs;
+ extern void ret_from_fork(void);
+ unsigned long sp = (unsigned long)p->thread_info + THREAD_SIZE;
+ unsigned long childframe;
+
+ CHECK_FULL_REGS(regs);
+ /* Copy registers */
+ sp -= sizeof(struct pt_regs);
+ childregs = (struct pt_regs *) sp;
+ *childregs = *regs;
+ if ((childregs->msr & MSR_PR) == 0) {
+ /* for kernel thread, set `current' and stackptr in new task */
+ childregs->gpr[1] = sp + sizeof(struct pt_regs);
+ childregs->gpr[2] = (unsigned long) p;
+ p->thread.regs = NULL; /* no user register state */
+ } else {
+ childregs->gpr[1] = usp;
+ p->thread.regs = childregs;
+ if (clone_flags & CLONE_SETTLS)
+ childregs->gpr[2] = childregs->gpr[6];
+ }
+ childregs->gpr[3] = 0; /* Result from fork() */
+ sp -= STACK_FRAME_OVERHEAD;
+ childframe = sp;
+
+ /*
+ * The way this works is that at some point in the future
+ * some task will call _switch to switch to the new task.
+ * That will pop off the stack frame created below and start
+ * the new task running at ret_from_fork. The new task will
+ * do some house keeping and then return from the fork or clone
+ * system call, using the stack frame created above.
+ */
+ sp -= sizeof(struct pt_regs);
+ kregs = (struct pt_regs *) sp;
+ sp -= STACK_FRAME_OVERHEAD;
+ p->thread.ksp = sp;
+ kregs->nip = (unsigned long)ret_from_fork;
+
+ p->thread.last_syscall = -1;
+
+ return 0;
+}
+
+/*
+ * Set up a thread for executing a new program
+ */
+void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
+{
+ set_fs(USER_DS);
+ memset(regs->gpr, 0, sizeof(regs->gpr));
+ regs->ctr = 0;
+ regs->link = 0;
+ regs->xer = 0;
+ regs->ccr = 0;
+ regs->mq = 0;
+ regs->nip = nip;
+ regs->gpr[1] = sp;
+ regs->msr = MSR_USER;
+#ifndef CONFIG_SMP
+ if (last_task_used_math == current)
+ last_task_used_math = NULL;
+#ifdef CONFIG_ALTIVEC
+ if (last_task_used_altivec == current)
+ last_task_used_altivec = NULL;
+#endif
+#ifdef CONFIG_SPE
+ if (last_task_used_spe == current)
+ last_task_used_spe = NULL;
+#endif
+#endif /* CONFIG_SMP */
+ memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
+ current->thread.fpscr = 0;
+#ifdef CONFIG_ALTIVEC
+ memset(current->thread.vr, 0, sizeof(current->thread.vr));
+ memset(¤t->thread.vscr, 0, sizeof(current->thread.vscr));
+ current->thread.vrsave = 0;
+ current->thread.used_vr = 0;
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_SPE
+ memset(current->thread.evr, 0, sizeof(current->thread.evr));
+ current->thread.acc = 0;
+ current->thread.spefscr = 0;
+ current->thread.used_spe = 0;
+#endif /* CONFIG_SPE */
+}
+
+#define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \
+ | PR_FP_EXC_RES | PR_FP_EXC_INV)
+
+int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
+{
+ struct pt_regs *regs = tsk->thread.regs;
+
+ /* This is a bit hairy. If we are an SPE enabled processor
+ * (have embedded fp) we store the IEEE exception enable flags in
+ * fpexc_mode. fpexc_mode is also used for setting FP exception
+ * mode (asyn, precise, disabled) for 'Classic' FP. */
+ if (val & PR_FP_EXC_SW_ENABLE) {
+#ifdef CONFIG_SPE
+ tsk->thread.fpexc_mode = val &
+ (PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
+#else
+ return -EINVAL;
+#endif
+ } else {
+ /* on a CONFIG_SPE this does not hurt us. The bits that
+ * __pack_fe01 use do not overlap with bits used for
+ * PR_FP_EXC_SW_ENABLE. Additionally, the MSR[FE0,FE1] bits
+ * on CONFIG_SPE implementations are reserved so writing to
+ * them does not change anything */
+ if (val > PR_FP_EXC_PRECISE)
+ return -EINVAL;
+ tsk->thread.fpexc_mode = __pack_fe01(val);
+ if (regs != NULL && (regs->msr & MSR_FP) != 0)
+ regs->msr = (regs->msr & ~(MSR_FE0|MSR_FE1))
+ | tsk->thread.fpexc_mode;
+ }
+ return 0;
+}
+
+int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
+{
+ unsigned int val;
+
+ if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
+#ifdef CONFIG_SPE
+ val = tsk->thread.fpexc_mode;
+#else
+ return -EINVAL;
+#endif
+ else
+ val = __unpack_fe01(tsk->thread.fpexc_mode);
+ return put_user(val, (unsigned int __user *) adr);
+}
+
+int sys_clone(unsigned long clone_flags, unsigned long usp,
+ int __user *parent_tidp, void __user *child_threadptr,
+ int __user *child_tidp, int p6,
+ struct pt_regs *regs)
+{
+ CHECK_FULL_REGS(regs);
+ if (usp == 0)
+ usp = regs->gpr[1]; /* stack pointer for child */
+ return do_fork(clone_flags, usp, regs, 0, parent_tidp, child_tidp);
+}
+
+int sys_fork(unsigned long p1, unsigned long p2, unsigned long p3,
+ unsigned long p4, unsigned long p5, unsigned long p6,
+ struct pt_regs *regs)
+{
+ CHECK_FULL_REGS(regs);
+ return do_fork(SIGCHLD, regs->gpr[1], regs, 0, NULL, NULL);
+}
+
+int sys_vfork(unsigned long p1, unsigned long p2, unsigned long p3,
+ unsigned long p4, unsigned long p5, unsigned long p6,
+ struct pt_regs *regs)
+{
+ CHECK_FULL_REGS(regs);
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->gpr[1],
+ regs, 0, NULL, NULL);
+}
+
+int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
+ unsigned long a3, unsigned long a4, unsigned long a5,
+ struct pt_regs *regs)
+{
+ int error;
+ char * filename;
+
+ filename = getname((char __user *) a0);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ flush_fp_to_thread(current);
+ flush_altivec_to_thread(current);
+ flush_spe_to_thread(current);
+ if (error == 0) {
+ task_lock(current);
+ current->ptrace &= ~PT_DTRACE;
+ task_unlock(current);
+ }
+ putname(filename);
+out:
+ return error;
+}
+
+static int validate_sp(unsigned long sp, struct task_struct *p,
+ unsigned long nbytes)
+{
+ unsigned long stack_page = (unsigned long)p->thread_info;
+
+ if (sp >= stack_page + sizeof(struct thread_struct)
+ && sp <= stack_page + THREAD_SIZE - nbytes)
+ return 1;
+
+#ifdef CONFIG_IRQSTACKS
+ stack_page = (unsigned long) hardirq_ctx[task_cpu(p)];
+ if (sp >= stack_page + sizeof(struct thread_struct)
+ && sp <= stack_page + THREAD_SIZE - nbytes)
+ return 1;
+
+ stack_page = (unsigned long) softirq_ctx[task_cpu(p)];
+ if (sp >= stack_page + sizeof(struct thread_struct)
+ && sp <= stack_page + THREAD_SIZE - nbytes)
+ return 1;
+#endif
+
+ return 0;
+}
+
+void dump_stack(void)
+{
+ show_stack(current, NULL);
+}
+
+EXPORT_SYMBOL(dump_stack);
+
+void show_stack(struct task_struct *tsk, unsigned long *stack)
+{
+ unsigned long sp, stack_top, prev_sp, ret;
+ int count = 0;
+ unsigned long next_exc = 0;
+ struct pt_regs *regs;
+ extern char ret_from_except, ret_from_except_full, ret_from_syscall;
+
+ sp = (unsigned long) stack;
+ if (tsk == NULL)
+ tsk = current;
+ if (sp == 0) {
+ if (tsk == current)
+ asm("mr %0,1" : "=r" (sp));
+ else
+ sp = tsk->thread.ksp;
+ }
+
+ prev_sp = (unsigned long) (tsk->thread_info + 1);
+ stack_top = (unsigned long) tsk->thread_info + THREAD_SIZE;
+ while (count < 16 && sp > prev_sp && sp < stack_top && (sp & 3) == 0) {
+ if (count == 0) {
+ printk("Call trace:");
+#ifdef CONFIG_KALLSYMS
+ printk("\n");
+#endif
+ } else {
+ if (next_exc) {
+ ret = next_exc;
+ next_exc = 0;
+ } else
+ ret = *(unsigned long *)(sp + 4);
+ printk(" [%08lx] ", ret);
+#ifdef CONFIG_KALLSYMS
+ print_symbol("%s", ret);
+ printk("\n");
+#endif
+ if (ret == (unsigned long) &ret_from_except
+ || ret == (unsigned long) &ret_from_except_full
+ || ret == (unsigned long) &ret_from_syscall) {
+ /* sp + 16 points to an exception frame */
+ regs = (struct pt_regs *) (sp + 16);
+ if (sp + 16 + sizeof(*regs) <= stack_top)
+ next_exc = regs->nip;
+ }
+ }
+ ++count;
+ sp = *(unsigned long *)sp;
+ }
+#ifndef CONFIG_KALLSYMS
+ if (count > 0)
+ printk("\n");
+#endif
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long ip, sp;
+ int count = 0;
+
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ sp = p->thread.ksp;
+ if (!validate_sp(sp, p, 16))
+ return 0;
+
+ do {
+ sp = *(unsigned long *)sp;
+ if (!validate_sp(sp, p, 16))
+ return 0;
+ if (count > 0) {
+ ip = *(unsigned long *)(sp + 4);
+ if (!in_sched_functions(ip))
+ return ip;
+ }
+ } while (count++ < 16);
+ return 0;
+}
+EXPORT_SYMBOL(get_wchan);
diff --git a/arch/powerpc/kernel/semaphore.c b/arch/powerpc/kernel/semaphore.c
new file mode 100644
index 0000000..2f8c3c9
--- /dev/null
+++ b/arch/powerpc/kernel/semaphore.c
@@ -0,0 +1,135 @@
+/*
+ * PowerPC-specific semaphore code.
+ *
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
+ * to eliminate the SMP races in the old version between the updates
+ * of `count' and `waking'. Now we use negative `count' values to
+ * indicate that some process(es) are waiting for the semaphore.
+ */
+
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/atomic.h>
+#include <asm/semaphore.h>
+#include <asm/errno.h>
+
+/*
+ * Atomically update sem->count.
+ * This does the equivalent of the following:
+ *
+ * old_count = sem->count;
+ * tmp = MAX(old_count, 0) + incr;
+ * sem->count = tmp;
+ * return old_count;
+ */
+static inline int __sem_update_count(struct semaphore *sem, int incr)
+{
+ int old_count, tmp;
+
+ __asm__ __volatile__("\n"
+"1: lwarx %0,0,%3\n"
+" srawi %1,%0,31\n"
+" andc %1,%0,%1\n"
+" add %1,%1,%4\n"
+ PPC405_ERR77(0,%3)
+" stwcx. %1,0,%3\n"
+" bne 1b"
+ : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
+ : "r" (&sem->count), "r" (incr), "m" (sem->count)
+ : "cc");
+
+ return old_count;
+}
+
+void __up(struct semaphore *sem)
+{
+ /*
+ * Note that we incremented count in up() before we came here,
+ * but that was ineffective since the result was <= 0, and
+ * any negative value of count is equivalent to 0.
+ * This ends up setting count to 1, unless count is now > 0
+ * (i.e. because some other cpu has called up() in the meantime),
+ * in which case we just increment count.
+ */
+ __sem_update_count(sem, 1);
+ wake_up(&sem->wait);
+}
+EXPORT_SYMBOL(__up);
+
+/*
+ * Note that when we come in to __down or __down_interruptible,
+ * we have already decremented count, but that decrement was
+ * ineffective since the result was < 0, and any negative value
+ * of count is equivalent to 0.
+ * Thus it is only when we decrement count from some value > 0
+ * that we have actually got the semaphore.
+ */
+void __sched __down(struct semaphore *sem)
+{
+ struct task_struct *tsk = current;
+ DECLARE_WAITQUEUE(wait, tsk);
+
+ __set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ add_wait_queue_exclusive(&sem->wait, &wait);
+
+ /*
+ * Try to get the semaphore. If the count is > 0, then we've
+ * got the semaphore; we decrement count and exit the loop.
+ * If the count is 0 or negative, we set it to -1, indicating
+ * that we are asleep, and then sleep.
+ */
+ while (__sem_update_count(sem, -1) <= 0) {
+ schedule();
+ set_task_state(tsk, TASK_UNINTERRUPTIBLE);
+ }
+ remove_wait_queue(&sem->wait, &wait);
+ __set_task_state(tsk, TASK_RUNNING);
+
+ /*
+ * If there are any more sleepers, wake one of them up so
+ * that it can either get the semaphore, or set count to -1
+ * indicating that there are still processes sleeping.
+ */
+ wake_up(&sem->wait);
+}
+EXPORT_SYMBOL(__down);
+
+int __sched __down_interruptible(struct semaphore * sem)
+{
+ int retval = 0;
+ struct task_struct *tsk = current;
+ DECLARE_WAITQUEUE(wait, tsk);
+
+ __set_task_state(tsk, TASK_INTERRUPTIBLE);
+ add_wait_queue_exclusive(&sem->wait, &wait);
+
+ while (__sem_update_count(sem, -1) <= 0) {
+ if (signal_pending(current)) {
+ /*
+ * A signal is pending - give up trying.
+ * Set sem->count to 0 if it is negative,
+ * since we are no longer sleeping.
+ */
+ __sem_update_count(sem, 0);
+ retval = -EINTR;
+ break;
+ }
+ schedule();
+ set_task_state(tsk, TASK_INTERRUPTIBLE);
+ }
+ remove_wait_queue(&sem->wait, &wait);
+ __set_task_state(tsk, TASK_RUNNING);
+
+ wake_up(&sem->wait);
+ return retval;
+}
+EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
new file mode 100644
index 0000000..c7afbbb
--- /dev/null
+++ b/arch/powerpc/kernel/traps.c
@@ -0,0 +1,1047 @@
+/*
+ * arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@samba.org)
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/interrupt.h>
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/prctl.h>
+#include <linux/delay.h>
+#include <linux/kprobes.h>
+#include <asm/kdebug.h>
+
+#include <asm/pgtable.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/reg.h>
+#include <asm/xmon.h>
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+#include <asm/perfmon.h>
+
+#ifdef CONFIG_DEBUGGER
+int (*__debugger)(struct pt_regs *regs);
+int (*__debugger_ipi)(struct pt_regs *regs);
+int (*__debugger_bpt)(struct pt_regs *regs);
+int (*__debugger_sstep)(struct pt_regs *regs);
+int (*__debugger_iabr_match)(struct pt_regs *regs);
+int (*__debugger_dabr_match)(struct pt_regs *regs);
+int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+EXPORT_SYMBOL(__debugger);
+EXPORT_SYMBOL(__debugger_ipi);
+EXPORT_SYMBOL(__debugger_bpt);
+EXPORT_SYMBOL(__debugger_sstep);
+EXPORT_SYMBOL(__debugger_iabr_match);
+EXPORT_SYMBOL(__debugger_dabr_match);
+EXPORT_SYMBOL(__debugger_fault_handler);
+#endif
+
+struct notifier_block *powerpc_die_chain;
+static DEFINE_SPINLOCK(die_notifier_lock);
+
+int register_die_notifier(struct notifier_block *nb)
+{
+ int err = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&die_notifier_lock, flags);
+ err = notifier_chain_register(&powerpc_die_chain, nb);
+ spin_unlock_irqrestore(&die_notifier_lock, flags);
+ return err;
+}
+
+/*
+ * Trap & Exception support
+ */
+
+static DEFINE_SPINLOCK(die_lock);
+
+int die(const char *str, struct pt_regs *regs, long err)
+{
+ static int die_counter;
+ int nl = 0;
+
+ if (debugger(regs))
+ return 1;
+
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ bust_spinlocks(1);
+#ifdef CONFIG_PMAC_BACKLIGHT
+ if (_machine == _MACH_Pmac) {
+ set_backlight_enable(1);
+ set_backlight_level(BACKLIGHT_MAX);
+ }
+#endif
+ printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
+#ifdef CONFIG_PREEMPT
+ printk("PREEMPT ");
+ nl = 1;
+#endif
+#ifdef CONFIG_SMP
+ printk("SMP NR_CPUS=%d ", NR_CPUS);
+ nl = 1;
+#endif
+#ifdef CONFIG_DEBUG_PAGEALLOC
+ printk("DEBUG_PAGEALLOC ");
+ nl = 1;
+#endif
+#ifdef CONFIG_NUMA
+ printk("NUMA ");
+ nl = 1;
+#endif
+#ifdef CONFIG_PPC64
+ switch (systemcfg->platform) {
+ case PLATFORM_PSERIES:
+ printk("PSERIES ");
+ nl = 1;
+ break;
+ case PLATFORM_PSERIES_LPAR:
+ printk("PSERIES LPAR ");
+ nl = 1;
+ break;
+ case PLATFORM_ISERIES_LPAR:
+ printk("ISERIES LPAR ");
+ nl = 1;
+ break;
+ case PLATFORM_POWERMAC:
+ printk("POWERMAC ");
+ nl = 1;
+ break;
+ case PLATFORM_BPA:
+ printk("BPA ");
+ nl = 1;
+ break;
+ }
+#endif
+ if (nl)
+ printk("\n");
+ print_modules();
+ show_regs(regs);
+ bust_spinlocks(0);
+ spin_unlock_irq(&die_lock);
+
+ if (in_interrupt())
+ panic("Fatal exception in interrupt");
+
+ if (panic_on_oops) {
+ panic("Fatal exception");
+ }
+ do_exit(err);
+
+ return 0;
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+ siginfo_t info;
+
+ if (!user_mode(regs)) {
+ if (die("Exception in kernel mode", regs, signr))
+ return;
+ }
+
+ memset(&info, 0, sizeof(info));
+ info.si_signo = signr;
+ info.si_code = code;
+ info.si_addr = (void __user *) addr;
+ force_sig_info(signr, &info, current);
+
+ /*
+ * Init gets no signals that it doesn't have a handler for.
+ * That's all very well, but if it has caused a synchronous
+ * exception and we ignore the resulting signal, it will just
+ * generate the same exception over and over again and we get
+ * nowhere. Better to kill it and let the kernel panic.
+ */
+ if (current->pid == 1) {
+ __sighandler_t handler;
+
+ spin_lock_irq(¤t->sighand->siglock);
+ handler = current->sighand->action[signr-1].sa.sa_handler;
+ spin_unlock_irq(¤t->sighand->siglock);
+ if (handler == SIG_DFL) {
+ /* init has generated a synchronous exception
+ and it doesn't have a handler for the signal */
+ printk(KERN_CRIT "init has generated signal %d "
+ "but has no handler for it\n", signr);
+ do_exit(signr);
+ }
+ }
+}
+
+#ifdef CONFIG_PPC64
+void system_reset_exception(struct pt_regs *regs)
+{
+ /* See if any machine dependent calls */
+ if (ppc_md.system_reset_exception)
+ ppc_md.system_reset_exception(regs);
+
+ die("System Reset", regs, SIGABRT);
+
+ /* Must die if the interrupt is not recoverable */
+ if (!(regs->msr & MSR_RI))
+ panic("Unrecoverable System Reset");
+
+ /* What should we do here? We could issue a shutdown or hard reset. */
+}
+#endif
+
+/*
+ * I/O accesses can cause machine checks on powermacs.
+ * Check if the NIP corresponds to the address of a sync
+ * instruction for which there is an entry in the exception
+ * table.
+ * Note that the 601 only takes a machine check on TEA
+ * (transfer error ack) signal assertion, and does not
+ * set any of the top 16 bits of SRR1.
+ * -- paulus.
+ */
+static inline int check_io_access(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC_PMAC
+ unsigned long msr = regs->msr;
+ const struct exception_table_entry *entry;
+ unsigned int *nip = (unsigned int *)regs->nip;
+
+ if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000)))
+ && (entry = search_exception_tables(regs->nip)) != NULL) {
+ /*
+ * Check that it's a sync instruction, or somewhere
+ * in the twi; isync; nop sequence that inb/inw/inl uses.
+ * As the address is in the exception table
+ * we should be able to read the instr there.
+ * For the debug message, we look at the preceding
+ * load or store.
+ */
+ if (*nip == 0x60000000) /* nop */
+ nip -= 2;
+ else if (*nip == 0x4c00012c) /* isync */
+ --nip;
+ if (*nip == 0x7c0004ac || (*nip >> 26) == 3) {
+ /* sync or twi */
+ unsigned int rb;
+
+ --nip;
+ rb = (*nip >> 11) & 0x1f;
+ printk(KERN_DEBUG "%s bad port %lx at %p\n",
+ (*nip & 0x100)? "OUT to": "IN from",
+ regs->gpr[rb] - _IO_BASE, nip);
+ regs->msr |= MSR_RI;
+ regs->nip = entry->fixup;
+ return 1;
+ }
+ }
+#endif /* CONFIG_PPC_PMAC */
+ return 0;
+}
+
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+/* On 4xx, the reason for the machine check or program exception
+ is in the ESR. */
+#define get_reason(regs) ((regs)->dsisr)
+#ifndef CONFIG_FSL_BOOKE
+#define get_mc_reason(regs) ((regs)->dsisr)
+#else
+#define get_mc_reason(regs) (mfspr(SPRN_MCSR))
+#endif
+#define REASON_FP ESR_FP
+#define REASON_ILLEGAL (ESR_PIL | ESR_PUO)
+#define REASON_PRIVILEGED ESR_PPR
+#define REASON_TRAP ESR_PTR
+
+/* single-step stuff */
+#define single_stepping(regs) (current->thread.dbcr0 & DBCR0_IC)
+#define clear_single_step(regs) (current->thread.dbcr0 &= ~DBCR0_IC)
+
+#else
+/* On non-4xx, the reason for the machine check or program
+ exception is in the MSR. */
+#define get_reason(regs) ((regs)->msr)
+#define get_mc_reason(regs) ((regs)->msr)
+#define REASON_FP 0x100000
+#define REASON_ILLEGAL 0x80000
+#define REASON_PRIVILEGED 0x40000
+#define REASON_TRAP 0x20000
+
+#define single_stepping(regs) ((regs)->msr & MSR_SE)
+#define clear_single_step(regs) ((regs)->msr &= ~MSR_SE)
+#endif
+
+/*
+ * This is "fall-back" implementation for configurations
+ * which don't provide platform-specific machine check info
+ */
+void __attribute__ ((weak))
+platform_machine_check(struct pt_regs *regs)
+{
+}
+
+void MachineCheckException(struct pt_regs *regs)
+{
+#ifdef CONFIG_PPC64
+ int recover = 0;
+
+ /* See if any machine dependent calls */
+ if (ppc_md.machine_check_exception)
+ recover = ppc_md.machine_check_exception(regs);
+
+ if (recover)
+ return;
+#else
+ unsigned long reason = get_mc_reason(regs);
+
+ if (user_mode(regs)) {
+ regs->msr |= MSR_RI;
+ _exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
+ return;
+ }
+
+#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
+ /* the qspan pci read routines can cause machine checks -- Cort */
+ bad_page_fault(regs, regs->dar, SIGBUS);
+ return;
+#endif
+
+ if (debugger_fault_handler(regs)) {
+ regs->msr |= MSR_RI;
+ return;
+ }
+
+ if (check_io_access(regs))
+ return;
+
+#if defined(CONFIG_4xx) && !defined(CONFIG_440A)
+ if (reason & ESR_IMCP) {
+ printk("Instruction");
+ mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+ } else
+ printk("Data");
+ printk(" machine check in kernel mode.\n");
+#elif defined(CONFIG_440A)
+ printk("Machine check in kernel mode.\n");
+ if (reason & ESR_IMCP){
+ printk("Instruction Synchronous Machine Check exception\n");
+ mtspr(SPRN_ESR, reason & ~ESR_IMCP);
+ }
+ else {
+ u32 mcsr = mfspr(SPRN_MCSR);
+ if (mcsr & MCSR_IB)
+ printk("Instruction Read PLB Error\n");
+ if (mcsr & MCSR_DRB)
+ printk("Data Read PLB Error\n");
+ if (mcsr & MCSR_DWB)
+ printk("Data Write PLB Error\n");
+ if (mcsr & MCSR_TLBP)
+ printk("TLB Parity Error\n");
+ if (mcsr & MCSR_ICP){
+ flush_instruction_cache();
+ printk("I-Cache Parity Error\n");
+ }
+ if (mcsr & MCSR_DCSP)
+ printk("D-Cache Search Parity Error\n");
+ if (mcsr & MCSR_DCFP)
+ printk("D-Cache Flush Parity Error\n");
+ if (mcsr & MCSR_IMPE)
+ printk("Machine Check exception is imprecise\n");
+
+ /* Clear MCSR */
+ mtspr(SPRN_MCSR, mcsr);
+ }
+#elif defined (CONFIG_E500)
+ printk("Machine check in kernel mode.\n");
+ printk("Caused by (from MCSR=%lx): ", reason);
+
+ if (reason & MCSR_MCP)
+ printk("Machine Check Signal\n");
+ if (reason & MCSR_ICPERR)
+ printk("Instruction Cache Parity Error\n");
+ if (reason & MCSR_DCP_PERR)
+ printk("Data Cache Push Parity Error\n");
+ if (reason & MCSR_DCPERR)
+ printk("Data Cache Parity Error\n");
+ if (reason & MCSR_GL_CI)
+ printk("Guarded Load or Cache-Inhibited stwcx.\n");
+ if (reason & MCSR_BUS_IAERR)
+ printk("Bus - Instruction Address Error\n");
+ if (reason & MCSR_BUS_RAERR)
+ printk("Bus - Read Address Error\n");
+ if (reason & MCSR_BUS_WAERR)
+ printk("Bus - Write Address Error\n");
+ if (reason & MCSR_BUS_IBERR)
+ printk("Bus - Instruction Data Error\n");
+ if (reason & MCSR_BUS_RBERR)
+ printk("Bus - Read Data Bus Error\n");
+ if (reason & MCSR_BUS_WBERR)
+ printk("Bus - Read Data Bus Error\n");
+ if (reason & MCSR_BUS_IPERR)
+ printk("Bus - Instruction Parity Error\n");
+ if (reason & MCSR_BUS_RPERR)
+ printk("Bus - Read Parity Error\n");
+#elif defined (CONFIG_E200)
+ printk("Machine check in kernel mode.\n");
+ printk("Caused by (from MCSR=%lx): ", reason);
+
+ if (reason & MCSR_MCP)
+ printk("Machine Check Signal\n");
+ if (reason & MCSR_CP_PERR)
+ printk("Cache Push Parity Error\n");
+ if (reason & MCSR_CPERR)
+ printk("Cache Parity Error\n");
+ if (reason & MCSR_EXCP_ERR)
+ printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n");
+ if (reason & MCSR_BUS_IRERR)
+ printk("Bus - Read Bus Error on instruction fetch\n");
+ if (reason & MCSR_BUS_DRERR)
+ printk("Bus - Read Bus Error on data load\n");
+ if (reason & MCSR_BUS_WRERR)
+ printk("Bus - Write Bus Error on buffered store or cache line push\n");
+#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */
+ printk("Machine check in kernel mode.\n");
+ printk("Caused by (from SRR1=%lx): ", reason);
+ switch (reason & 0x601F0000) {
+ case 0x80000:
+ printk("Machine check signal\n");
+ break;
+ case 0: /* for 601 */
+ case 0x40000:
+ case 0x140000: /* 7450 MSS error and TEA */
+ printk("Transfer error ack signal\n");
+ break;
+ case 0x20000:
+ printk("Data parity error signal\n");
+ break;
+ case 0x10000:
+ printk("Address parity error signal\n");
+ break;
+ case 0x20000000:
+ printk("L1 Data Cache error\n");
+ break;
+ case 0x40000000:
+ printk("L1 Instruction Cache error\n");
+ break;
+ case 0x00100000:
+ printk("L2 data cache parity error\n");
+ break;
+ default:
+ printk("Unknown values in msr\n");
+ }
+#endif /* CONFIG_4xx */
+
+ /*
+ * Optional platform-provided routine to print out
+ * additional info, e.g. bus error registers.
+ */
+ platform_machine_check(regs);
+#endif /* CONFIG_PPC64 */
+
+ if (debugger_fault_handler(regs))
+ return;
+ die("Machine check", regs, SIGBUS);
+
+ /* Must die if the interrupt is not recoverable */
+ if (!(regs->msr & MSR_RI))
+ panic("Unrecoverable Machine check");
+}
+
+void SMIException(struct pt_regs *regs)
+{
+ die("System Management Interrupt", regs, SIGABRT);
+}
+
+void UnknownException(struct pt_regs *regs)
+{
+ printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+ regs->nip, regs->msr, regs->trap);
+
+ _exception(SIGTRAP, regs, 0, 0);
+}
+
+void InstructionBreakpoint(struct pt_regs *regs)
+{
+ if (notify_die(DIE_IABR_MATCH, "iabr_match", regs, 5,
+ 5, SIGTRAP) == NOTIFY_STOP)
+ return;
+ if (debugger_iabr_match(regs))
+ return;
+ _exception(SIGTRAP, regs, TRAP_BRKPT, regs->nip);
+}
+
+void RunModeException(struct pt_regs *regs)
+{
+ _exception(SIGTRAP, regs, 0, 0);
+}
+
+void SingleStepException(struct pt_regs *regs)
+{
+ regs->msr &= ~(MSR_SE | MSR_BE); /* Turn off 'trace' bits */
+
+ if (notify_die(DIE_SSTEP, "single_step", regs, 5,
+ 5, SIGTRAP) == NOTIFY_STOP)
+ return;
+ if (debugger_sstep(regs))
+ return;
+
+ _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+}
+
+/*
+ * After we have successfully emulated an instruction, we have to
+ * check if the instruction was being single-stepped, and if so,
+ * pretend we got a single-step exception. This was pointed out
+ * by Kumar Gala. -- paulus
+ */
+static void emulate_single_step(struct pt_regs *regs)
+{
+ if (single_stepping(regs)) {
+ clear_single_step(regs);
+ _exception(SIGTRAP, regs, TRAP_TRACE, 0);
+ }
+}
+
+/* Illegal instruction emulation support. Originally written to
+ * provide the PVR to user applications using the mfspr rd, PVR.
+ * Return non-zero if we can't emulate, or -EFAULT if the associated
+ * memory access caused an access fault. Return zero on success.
+ *
+ * There are a couple of ways to do this, either "decode" the instruction
+ * or directly match lots of bits. In this case, matching lots of
+ * bits is faster and easier.
+ *
+ */
+#define INST_MFSPR_PVR 0x7c1f42a6
+#define INST_MFSPR_PVR_MASK 0xfc1fffff
+
+#define INST_DCBA 0x7c0005ec
+#define INST_DCBA_MASK 0x7c0007fe
+
+#define INST_MCRXR 0x7c000400
+#define INST_MCRXR_MASK 0x7c0007fe
+
+#define INST_STRING 0x7c00042a
+#define INST_STRING_MASK 0x7c0007fe
+#define INST_STRING_GEN_MASK 0x7c00067e
+#define INST_LSWI 0x7c0004aa
+#define INST_LSWX 0x7c00042a
+#define INST_STSWI 0x7c0005aa
+#define INST_STSWX 0x7c00052a
+
+static int emulate_string_inst(struct pt_regs *regs, u32 instword)
+{
+ u8 rT = (instword >> 21) & 0x1f;
+ u8 rA = (instword >> 16) & 0x1f;
+ u8 NB_RB = (instword >> 11) & 0x1f;
+ u32 num_bytes;
+ unsigned long EA;
+ int pos = 0;
+
+ /* Early out if we are an invalid form of lswx */
+ if ((instword & INST_STRING_MASK) == INST_LSWX)
+ if ((rT == rA) || (rT == NB_RB))
+ return -EINVAL;
+
+ EA = (rA == 0) ? 0 : regs->gpr[rA];
+
+ switch (instword & INST_STRING_MASK) {
+ case INST_LSWX:
+ case INST_STSWX:
+ EA += NB_RB;
+ num_bytes = regs->xer & 0x7f;
+ break;
+ case INST_LSWI:
+ case INST_STSWI:
+ num_bytes = (NB_RB == 0) ? 32 : NB_RB;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ while (num_bytes != 0)
+ {
+ u8 val;
+ u32 shift = 8 * (3 - (pos & 0x3));
+
+ switch ((instword & INST_STRING_MASK)) {
+ case INST_LSWX:
+ case INST_LSWI:
+ if (get_user(val, (u8 __user *)EA))
+ return -EFAULT;
+ /* first time updating this reg,
+ * zero it out */
+ if (pos == 0)
+ regs->gpr[rT] = 0;
+ regs->gpr[rT] |= val << shift;
+ break;
+ case INST_STSWI:
+ case INST_STSWX:
+ val = regs->gpr[rT] >> shift;
+ if (put_user(val, (u8 __user *)EA))
+ return -EFAULT;
+ break;
+ }
+ /* move EA to next address */
+ EA += 1;
+ num_bytes--;
+
+ /* manage our position within the register */
+ if (++pos == 4) {
+ pos = 0;
+ if (++rT == 32)
+ rT = 0;
+ }
+ }
+
+ return 0;
+}
+
+static int emulate_instruction(struct pt_regs *regs)
+{
+ u32 instword;
+ u32 rd;
+
+ if (!user_mode(regs))
+ return -EINVAL;
+ CHECK_FULL_REGS(regs);
+
+ if (get_user(instword, (u32 __user *)(regs->nip)))
+ return -EFAULT;
+
+ /* Emulate the mfspr rD, PVR. */
+ if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
+ rd = (instword >> 21) & 0x1f;
+ regs->gpr[rd] = mfspr(SPRN_PVR);
+ return 0;
+ }
+
+ /* Emulating the dcba insn is just a no-op. */
+ if ((instword & INST_DCBA_MASK) == INST_DCBA)
+ return 0;
+
+ /* Emulate the mcrxr insn. */
+ if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
+ int shift = (instword >> 21) & 0x1c;
+ unsigned long msk = 0xf0000000UL >> shift;
+
+ regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
+ regs->xer &= ~0xf0000000UL;
+ return 0;
+ }
+
+ /* Emulate load/store string insn. */
+ if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
+ return emulate_string_inst(regs, instword);
+
+ return -EINVAL;
+}
+
+/*
+ * Look through the list of trap instructions that are used for BUG(),
+ * BUG_ON() and WARN_ON() and see if we hit one. At this point we know
+ * that the exception was caused by a trap instruction of some kind.
+ * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
+ * otherwise.
+ */
+extern struct bug_entry __start___bug_table[], __stop___bug_table[];
+
+#ifndef CONFIG_MODULES
+#define module_find_bug(x) NULL
+#endif
+
+struct bug_entry *find_bug(unsigned long bugaddr)
+{
+ struct bug_entry *bug;
+
+ for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
+ if (bugaddr == bug->bug_addr)
+ return bug;
+ return module_find_bug(bugaddr);
+}
+
+int check_bug_trap(struct pt_regs *regs)
+{
+ struct bug_entry *bug;
+ unsigned long addr;
+
+ if (regs->msr & MSR_PR)
+ return 0; /* not in kernel */
+ addr = regs->nip; /* address of trap instruction */
+ if (addr < PAGE_OFFSET)
+ return 0;
+ bug = find_bug(regs->nip);
+ if (bug == NULL)
+ return 0;
+ if (bug->line & BUG_WARNING_TRAP) {
+ /* this is a WARN_ON rather than BUG/BUG_ON */
+#ifdef CONFIG_XMON
+ xmon_printf(KERN_ERR "Badness in %s at %s:%d\n",
+ bug->function, bug->file,
+ bug->line & ~BUG_WARNING_TRAP);
+#endif /* CONFIG_XMON */
+ printk(KERN_ERR "Badness in %s at %s:%d\n",
+ bug->function, bug->file,
+ bug->line & ~BUG_WARNING_TRAP);
+ dump_stack();
+ return 1;
+ }
+#ifdef CONFIG_XMON
+ xmon_printf(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+ bug->function, bug->file, bug->line);
+ xmon(regs);
+#endif /* CONFIG_XMON */
+ printk(KERN_CRIT "kernel BUG in %s at %s:%d!\n",
+ bug->function, bug->file, bug->line);
+
+ return 0;
+}
+
+void ProgramCheckException(struct pt_regs *regs)
+{
+ unsigned int reason = get_reason(regs);
+ extern int do_mathemu(struct pt_regs *regs);
+
+#ifdef CONFIG_MATH_EMULATION
+ /* (reason & REASON_ILLEGAL) would be the obvious thing here,
+ * but there seems to be a hardware bug on the 405GP (RevD)
+ * that means ESR is sometimes set incorrectly - either to
+ * ESR_DST (!?) or 0. In the process of chasing this with the
+ * hardware people - not sure if it can happen on any illegal
+ * instruction or only on FP instructions, whether there is a
+ * pattern to occurences etc. -dgibson 31/Mar/2003 */
+ if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
+ emulate_single_step(regs);
+ return;
+ }
+#endif /* CONFIG_MATH_EMULATION */
+
+ if (reason & REASON_FP) {
+ /* IEEE FP exception */
+ int code = 0;
+ u32 fpscr;
+
+ /* We must make sure the FP state is consistent with
+ * our MSR_FP in regs
+ */
+ preempt_disable();
+ if (regs->msr & MSR_FP)
+ giveup_fpu(current);
+ preempt_enable();
+
+ fpscr = current->thread.fpscr;
+ fpscr &= fpscr << 22; /* mask summary bits with enables */
+ if (fpscr & FPSCR_VX)
+ code = FPE_FLTINV;
+ else if (fpscr & FPSCR_OX)
+ code = FPE_FLTOVF;
+ else if (fpscr & FPSCR_UX)
+ code = FPE_FLTUND;
+ else if (fpscr & FPSCR_ZX)
+ code = FPE_FLTDIV;
+ else if (fpscr & FPSCR_XX)
+ code = FPE_FLTRES;
+ _exception(SIGFPE, regs, code, regs->nip);
+ return;
+ }
+
+ if (reason & REASON_TRAP) {
+ /* trap exception */
+ if (debugger_bpt(regs))
+ return;
+ if (check_bug_trap(regs)) {
+ regs->nip += 4;
+ return;
+ }
+ _exception(SIGTRAP, regs, TRAP_BRKPT, 0);
+ return;
+ }
+
+ /* Try to emulate it if we should. */
+ if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
+ switch (emulate_instruction(regs)) {
+ case 0:
+ regs->nip += 4;
+ emulate_single_step(regs);
+ return;
+ case -EFAULT:
+ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
+ return;
+ }
+ }
+
+ if (reason & REASON_PRIVILEGED)
+ _exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
+ else
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+
+void AlignmentException(struct pt_regs *regs)
+{
+ int fixed;
+
+ fixed = fix_alignment(regs);
+
+ if (fixed == 1) {
+ regs->nip += 4; /* skip over emulated instruction */
+ emulate_single_step(regs);
+ return;
+ }
+
+ /* Operand address was bad */
+ if (fixed == -EFAULT) {
+ if (user_mode(regs))
+ _exception(SIGSEGV, regs, SEGV_ACCERR, regs->dar);
+ else
+ /* Search exception table */
+ bad_page_fault(regs, regs->dar, SIGSEGV);
+ return;
+ }
+ _exception(SIGBUS, regs, BUS_ADRALN, regs->dar);
+}
+
+void StackOverflow(struct pt_regs *regs)
+{
+ printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
+ current, regs->gpr[1]);
+ debugger(regs);
+ show_regs(regs);
+ panic("kernel stack overflow");
+}
+
+void nonrecoverable_exception(struct pt_regs *regs)
+{
+ printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
+ regs->nip, regs->msr);
+ debugger(regs);
+ die("nonrecoverable exception", regs, SIGKILL);
+}
+
+void trace_syscall(struct pt_regs *regs)
+{
+ printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld %s\n",
+ current, current->pid, regs->nip, regs->link, regs->gpr[0],
+ regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
+}
+
+#ifdef CONFIG_8xx
+void SoftwareEmulation(struct pt_regs *regs)
+{
+ extern int do_mathemu(struct pt_regs *);
+ extern int Soft_emulate_8xx(struct pt_regs *);
+ int errcode;
+
+ CHECK_FULL_REGS(regs);
+
+ if (!user_mode(regs)) {
+ debugger(regs);
+ die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
+ }
+
+#ifdef CONFIG_MATH_EMULATION
+ errcode = do_mathemu(regs);
+#else
+ errcode = Soft_emulate_8xx(regs);
+#endif
+ if (errcode) {
+ if (errcode > 0)
+ _exception(SIGFPE, regs, 0, 0);
+ else if (errcode == -EFAULT)
+ _exception(SIGSEGV, regs, 0, 0);
+ else
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+ } else
+ emulate_single_step(regs);
+}
+#endif /* CONFIG_8xx */
+
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+
+void DebugException(struct pt_regs *regs, unsigned long debug_status)
+{
+ if (debug_status & DBSR_IC) { /* instruction completion */
+ regs->msr &= ~MSR_DE;
+ if (user_mode(regs)) {
+ current->thread.dbcr0 &= ~DBCR0_IC;
+ } else {
+ /* Disable instruction completion */
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
+ /* Clear the instruction completion event */
+ mtspr(SPRN_DBSR, DBSR_IC);
+ if (debugger_sstep(regs))
+ return;
+ }
+ _exception(SIGTRAP, regs, TRAP_TRACE, 0);
+ }
+}
+#endif /* CONFIG_4xx || CONFIG_BOOKE */
+
+#if !defined(CONFIG_TAU_INT)
+void TAUException(struct pt_regs *regs)
+{
+ printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx %s\n",
+ regs->nip, regs->msr, regs->trap, print_tainted());
+}
+#endif /* CONFIG_INT_TAU */
+
+void AltivecUnavailException(struct pt_regs *regs)
+{
+ static int kernel_altivec_count;
+
+#ifndef CONFIG_ALTIVEC
+ if (user_mode(regs)) {
+ /* A user program has executed an altivec instruction,
+ but this kernel doesn't support altivec. */
+ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+ return;
+ }
+#endif
+ /* The kernel has executed an altivec instruction without
+ first enabling altivec. Whinge but let it do it. */
+ if (++kernel_altivec_count < 10)
+ printk(KERN_ERR "AltiVec used in kernel (task=%p, pc=%lx)\n",
+ current, regs->nip);
+ regs->msr |= MSR_VEC;
+}
+
+#ifdef CONFIG_ALTIVEC
+void AltivecAssistException(struct pt_regs *regs)
+{
+ int err;
+
+ preempt_disable();
+ if (regs->msr & MSR_VEC)
+ giveup_altivec(current);
+ preempt_enable();
+ if (!user_mode(regs)) {
+ printk(KERN_EMERG "VMX/Altivec assist exception in kernel mode"
+ " at %lx\n", regs->nip);
+ die("Kernel Altivec assist exception", regs, SIGILL);
+ }
+
+ err = emulate_altivec(regs);
+ if (err == 0) {
+ regs->nip += 4; /* skip emulated instruction */
+ emulate_single_step(regs);
+ return;
+ }
+
+ if (err == -EFAULT) {
+ /* got an error reading the instruction */
+ _exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
+ } else {
+ /* didn't recognize the instruction */
+ /* XXX quick hack for now: set the non-Java bit in the VSCR */
+ if (printk_ratelimit())
+ printk(KERN_ERR "Unrecognized altivec instruction "
+ "in %s at %lx\n", current->comm, regs->nip);
+ current->thread.vscr.u[3] |= 0x10000;
+ }
+}
+#endif /* CONFIG_ALTIVEC */
+
+#ifdef CONFIG_E500
+void PerformanceMonitorException(struct pt_regs *regs)
+{
+ perf_irq(regs);
+}
+#endif
+
+#ifdef CONFIG_FSL_BOOKE
+void CacheLockingException(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ /* We treat cache locking instructions from the user
+ * as priv ops, in the future we could try to do
+ * something smarter
+ */
+ if (error_code & (ESR_DLK|ESR_ILK))
+ _exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
+ return;
+}
+#endif /* CONFIG_FSL_BOOKE */
+
+#ifdef CONFIG_SPE
+void SPEFloatingPointException(struct pt_regs *regs)
+{
+ unsigned long spefscr;
+ int fpexc_mode;
+ int code = 0;
+
+ spefscr = current->thread.spefscr;
+ fpexc_mode = current->thread.fpexc_mode;
+
+ /* Hardware does not neccessarily set sticky
+ * underflow/overflow/invalid flags */
+ if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
+ code = FPE_FLTOVF;
+ spefscr |= SPEFSCR_FOVFS;
+ }
+ else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) {
+ code = FPE_FLTUND;
+ spefscr |= SPEFSCR_FUNFS;
+ }
+ else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV))
+ code = FPE_FLTDIV;
+ else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) {
+ code = FPE_FLTINV;
+ spefscr |= SPEFSCR_FINVS;
+ }
+ else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES))
+ code = FPE_FLTRES;
+
+ current->thread.spefscr = spefscr;
+
+ _exception(SIGFPE, regs, code, regs->nip);
+ return;
+}
+#endif
+
+#ifdef CONFIG_BOOKE_WDT
+/*
+ * Default handler for a Watchdog exception,
+ * spins until a reboot occurs
+ */
+void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
+{
+ /* Generic WatchdogHandler, implement your own */
+ mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE));
+ return;
+}
+
+void WatchdogException(struct pt_regs *regs)
+{
+ printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
+ WatchdogHandler(regs);
+}
+#endif
+
+void __init trap_init(void)
+{
+}
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
new file mode 100644
index 0000000..12cb90bc
--- /dev/null
+++ b/arch/powerpc/kernel/vector.S
@@ -0,0 +1,197 @@
+#include <linux/config.h>
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+/*
+ * The routines below are in assembler so we can closely control the
+ * usage of floating-point registers. These routines must be called
+ * with preempt disabled.
+ */
+#ifdef CONFIG_PPC32
+ .data
+fpzero:
+ .long 0
+fpone:
+ .long 0x3f800000 /* 1.0 in single-precision FP */
+fphalf:
+ .long 0x3f000000 /* 0.5 in single-precision FP */
+
+#define LDCONST(fr, name) \
+ lis r11,name@ha; \
+ lfs fr,name@l(r11)
+#else
+
+ .section ".toc","aw"
+fpzero:
+ .tc FD_0_0[TC],0
+fpone:
+ .tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */
+fphalf:
+ .tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */
+
+#define LDCONST(fr, name) \
+ lfd fr,name@toc(r2)
+#endif
+
+ .text
+/*
+ * Internal routine to enable floating point and set FPSCR to 0.
+ * Don't call it from C; it doesn't use the normal calling convention.
+ */
+fpenable:
+#ifdef CONFIG_PPC32
+ stwu r1,-64(r1)
+#else
+ stdu r1,-64(r1)
+#endif
+ mfmsr r10
+ ori r11,r10,MSR_FP
+ mtmsr r11
+ isync
+ stfd fr0,24(r1)
+ stfd fr1,16(r1)
+ stfd fr31,8(r1)
+ LDCONST(fr1, fpzero)
+ mffs fr31
+ mtfsf 0xff,fr1
+ blr
+
+fpdisable:
+ mtlr r12
+ mtfsf 0xff,fr31
+ lfd fr31,8(r1)
+ lfd fr1,16(r1)
+ lfd fr0,24(r1)
+ mtmsr r10
+ isync
+ addi r1,r1,64
+ blr
+
+/*
+ * Vector add, floating point.
+ */
+_GLOBAL(vaddfp)
+ mflr r12
+ bl fpenable
+ li r0,4
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ lfsx fr1,r5,r6
+ fadds fr0,fr0,fr1
+ stfsx fr0,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ b fpdisable
+
+/*
+ * Vector subtract, floating point.
+ */
+_GLOBAL(vsubfp)
+ mflr r12
+ bl fpenable
+ li r0,4
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ lfsx fr1,r5,r6
+ fsubs fr0,fr0,fr1
+ stfsx fr0,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ b fpdisable
+
+/*
+ * Vector multiply and add, floating point.
+ */
+_GLOBAL(vmaddfp)
+ mflr r12
+ bl fpenable
+ stfd fr2,32(r1)
+ li r0,4
+ mtctr r0
+ li r7,0
+1: lfsx fr0,r4,r7
+ lfsx fr1,r5,r7
+ lfsx fr2,r6,r7
+ fmadds fr0,fr0,fr2,fr1
+ stfsx fr0,r3,r7
+ addi r7,r7,4
+ bdnz 1b
+ lfd fr2,32(r1)
+ b fpdisable
+
+/*
+ * Vector negative multiply and subtract, floating point.
+ */
+_GLOBAL(vnmsubfp)
+ mflr r12
+ bl fpenable
+ stfd fr2,32(r1)
+ li r0,4
+ mtctr r0
+ li r7,0
+1: lfsx fr0,r4,r7
+ lfsx fr1,r5,r7
+ lfsx fr2,r6,r7
+ fnmsubs fr0,fr0,fr2,fr1
+ stfsx fr0,r3,r7
+ addi r7,r7,4
+ bdnz 1b
+ lfd fr2,32(r1)
+ b fpdisable
+
+/*
+ * Vector reciprocal estimate. We just compute 1.0/x.
+ * r3 -> destination, r4 -> source.
+ */
+_GLOBAL(vrefp)
+ mflr r12
+ bl fpenable
+ li r0,4
+ LDCONST(fr1, fpone)
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ fdivs fr0,fr1,fr0
+ stfsx fr0,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ b fpdisable
+
+/*
+ * Vector reciprocal square-root estimate, floating point.
+ * We use the frsqrte instruction for the initial estimate followed
+ * by 2 iterations of Newton-Raphson to get sufficient accuracy.
+ * r3 -> destination, r4 -> source.
+ */
+_GLOBAL(vrsqrtefp)
+ mflr r12
+ bl fpenable
+ stfd fr2,32(r1)
+ stfd fr3,40(r1)
+ stfd fr4,48(r1)
+ stfd fr5,56(r1)
+ li r0,4
+ LDCONST(fr4, fpone)
+ LDCONST(fr5, fphalf)
+ mtctr r0
+ li r6,0
+1: lfsx fr0,r4,r6
+ frsqrte fr1,fr0 /* r = frsqrte(s) */
+ fmuls fr3,fr1,fr0 /* r * s */
+ fmuls fr2,fr1,fr5 /* r * 0.5 */
+ fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
+ fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
+ fmuls fr3,fr1,fr0 /* r * s */
+ fmuls fr2,fr1,fr5 /* r * 0.5 */
+ fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */
+ fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */
+ stfsx fr1,r3,r6
+ addi r6,r6,4
+ bdnz 1b
+ lfd fr5,56(r1)
+ lfd fr4,48(r1)
+ lfd fr3,40(r1)
+ lfd fr2,32(r1)
+ b fpdisable
diff --git a/arch/powerpc/kernel/vmlinux.lds b/arch/powerpc/kernel/vmlinux.lds
new file mode 100644
index 0000000..d62c288
--- /dev/null
+++ b/arch/powerpc/kernel/vmlinux.lds
@@ -0,0 +1,174 @@
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to
+ the beginning of the section so we begin them at 0. */
+ /* Stabs debugging sections. */
+OUTPUT_ARCH(powerpc:common)
+jiffies = jiffies_64 + 4;
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+/* .init : { *(.init) } =0*/
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ . = ALIGN(8); __sched_text_start = .; *(.sched.text) __sched_text_end = .;
+ . = ALIGN(8); __lock_text_start = .; *(.spinlock.text) __lock_text_end = .;
+ *(.fixup)
+ *(.got1)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata : AT(ADDR(.rodata) - 0) { *(.rodata) *(.rodata.*) *(__vermagic) } .rodata1 : AT(ADDR(.rodata1) - 0) { *(.rodata1) } .pci_fixup : AT(ADDR(.pci_fixup) - 0) { __start_pci_fixups_early = .; *(.pci_fixup_early) __end_pci_fixups_early = .; __start_pci_fixups_header = .; *(.pci_fixup_header) __end_pci_fixups_header = .; __start_pci_fixups_final = .; *(.pci_fixup_final) __end_pci_fixups_final = .; __start_pci_fixups_enable = .; *(.pci_fixup_enable) __end_pci_fixups_enable = .; } __ksymtab : AT(ADDR(__ksymtab) - 0) { __start___ksymtab = .; *(__ksymtab) __stop___ksymtab = .; } __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - 0) { __start___ksymtab_gpl = .; *(__ksymtab_gpl) __stop___ksymtab_gpl = .; } __kcrctab : AT(ADDR(__kcrctab) - 0) { __start___kcrctab = .; *(__kcrctab) __stop___kcrctab = .; } __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - 0) { __start___kcrctab_gpl = .; *(__kcrctab_gpl) __stop___kcrctab_gpl = .; } __ksymtab_strings : AT(ADDR(__ksymtab_strings) - 0) { *(__ksymtab_strings) } __param : AT(ADDR(__param) - 0) { __start___param = .; *(__param) __stop___param = .; }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+ .fixup : { *(.fixup) }
+ __ex_table : {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+ __bug_table : {
+ __start___bug_table = .;
+ *(__bug_table)
+ __stop___bug_table = .;
+ }
+ /* Read-write section, merged into data segment: */
+ . = ALIGN(4096);
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.got.plt) *(.got)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(8192);
+ .data.init_task : { *(.data.init_task) }
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ /* .exit.text is discarded at runtime, not link time,
+ to deal with references from __bug_table */
+ .exit.text : { *(.exit.text) }
+ .init.data : {
+ *(.init.data);
+ __vtop_table_begin = .;
+ *(.vtop_fixup);
+ __vtop_table_end = .;
+ __ptov_table_begin = .;
+ *(.ptov_fixup);
+ __ptov_table_end = .;
+ }
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
+ __initcall_start = .;
+ .initcall.init : {
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ }
+ __initcall_end = .;
+
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+
+ .security_initcall.init : AT(ADDR(.security_initcall.init) - 0) { __security_initcall_start = .; *(.security_initcall.init) __security_initcall_end = .; }
+
+ __start___ftr_fixup = .;
+ __ftr_fixup : { *(__ftr_fixup) }
+ __stop___ftr_fixup = .;
+
+ . = ALIGN(32);
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+
+ . = ALIGN(4096);
+ __init_end = .;
+
+ . = ALIGN(4096);
+ _sextratext = .;
+ _eextratext = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ __bss_stop = .;
+
+ _end = . ;
+ PROVIDE (end = .);
+
+ /* Sections to be discarded. */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.exit.data)
+ }
+}
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..09c6525
--- /dev/null
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -0,0 +1,172 @@
+#include <asm-generic/vmlinux.lds.h>
+
+OUTPUT_ARCH(powerpc:common)
+jiffies = jiffies_64 + 4;
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+/* .init : { *(.init) } =0*/
+ .plt : { *(.plt) }
+ .text :
+ {
+ *(.text)
+ SCHED_TEXT
+ LOCK_TEXT
+ *(.fixup)
+ *(.got1)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+
+ RODATA
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ .fixup : { *(.fixup) }
+
+ __ex_table : {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+
+ __bug_table : {
+ __start___bug_table = .;
+ *(__bug_table)
+ __stop___bug_table = .;
+ }
+
+ /* Read-write section, merged into data segment: */
+ . = ALIGN(4096);
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.got.plt) *(.got)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+
+ . = ALIGN(4096);
+ __nosave_begin = .;
+ .data_nosave : { *(.data.nosave) }
+ . = ALIGN(4096);
+ __nosave_end = .;
+
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = ALIGN(8192);
+ .data.init_task : { *(.data.init_task) }
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .init.text : {
+ _sinittext = .;
+ *(.init.text)
+ _einittext = .;
+ }
+ /* .exit.text is discarded at runtime, not link time,
+ to deal with references from __bug_table */
+ .exit.text : { *(.exit.text) }
+ .init.data : {
+ *(.init.data);
+ __vtop_table_begin = .;
+ *(.vtop_fixup);
+ __vtop_table_end = .;
+ __ptov_table_begin = .;
+ *(.ptov_fixup);
+ __ptov_table_end = .;
+ }
+ . = ALIGN(16);
+ __setup_start = .;
+ .init.setup : { *(.init.setup) }
+ __setup_end = .;
+ __initcall_start = .;
+ .initcall.init : {
+ *(.initcall1.init)
+ *(.initcall2.init)
+ *(.initcall3.init)
+ *(.initcall4.init)
+ *(.initcall5.init)
+ *(.initcall6.init)
+ *(.initcall7.init)
+ }
+ __initcall_end = .;
+
+ __con_initcall_start = .;
+ .con_initcall.init : { *(.con_initcall.init) }
+ __con_initcall_end = .;
+
+ SECURITY_INIT
+
+ __start___ftr_fixup = .;
+ __ftr_fixup : { *(__ftr_fixup) }
+ __stop___ftr_fixup = .;
+
+ . = ALIGN(32);
+ __per_cpu_start = .;
+ .data.percpu : { *(.data.percpu) }
+ __per_cpu_end = .;
+
+ . = ALIGN(4096);
+ __initramfs_start = .;
+ .init.ramfs : { *(.init.ramfs) }
+ __initramfs_end = .;
+
+ . = ALIGN(4096);
+ __init_end = .;
+
+ . = ALIGN(4096);
+ _sextratext = .;
+ _eextratext = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ __bss_stop = .;
+
+ _end = . ;
+ PROVIDE (end = .);
+
+ /* Sections to be discarded. */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.exit.data)
+ }
+}
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
new file mode 100644
index 0000000..347f979
--- /dev/null
+++ b/arch/powerpc/lib/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for ppc-specific library files..
+#
+
+obj-y := strcase.o string.o
+obj-$(CONFIG_PPC32) += div64.o copy32.o checksum.o
+obj-$(CONFIG_PPC64) += copypage.o copyuser.o memcpy.o usercopy.o \
+ sstep.o checksum64.o
+obj-$(CONFIG_PPC_ISERIES) += e2a.o
diff --git a/arch/powerpc/lib/checksum.S b/arch/powerpc/lib/checksum.S
new file mode 100644
index 0000000..7874e8a
--- /dev/null
+++ b/arch/powerpc/lib/checksum.S
@@ -0,0 +1,225 @@
+/*
+ * This file contains assembly-language implementations
+ * of IP-style 1's complement checksum routines.
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
+ */
+
+#include <linux/sys.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+ .text
+
+/*
+ * ip_fast_csum(buf, len) -- Optimized for IP header
+ * len is in words and is always >= 5.
+ */
+_GLOBAL(ip_fast_csum)
+ lwz r0,0(r3)
+ lwzu r5,4(r3)
+ addic. r4,r4,-2
+ addc r0,r0,r5
+ mtctr r4
+ blelr-
+1: lwzu r4,4(r3)
+ adde r0,r0,r4
+ bdnz 1b
+ addze r0,r0 /* add in final carry */
+ rlwinm r3,r0,16,0,31 /* fold two halves together */
+ add r3,r0,r3
+ not r3,r3
+ srwi r3,r3,16
+ blr
+
+/*
+ * Compute checksum of TCP or UDP pseudo-header:
+ * csum_tcpudp_magic(saddr, daddr, len, proto, sum)
+ */
+_GLOBAL(csum_tcpudp_magic)
+ rlwimi r5,r6,16,0,15 /* put proto in upper half of len */
+ addc r0,r3,r4 /* add 4 32-bit words together */
+ adde r0,r0,r5
+ adde r0,r0,r7
+ addze r0,r0 /* add in final carry */
+ rlwinm r3,r0,16,0,31 /* fold two halves together */
+ add r3,r0,r3
+ not r3,r3
+ srwi r3,r3,16
+ blr
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * csum_partial(buff, len, sum)
+ */
+_GLOBAL(csum_partial)
+ addic r0,r5,0
+ subi r3,r3,4
+ srwi. r6,r4,2
+ beq 3f /* if we're doing < 4 bytes */
+ andi. r5,r3,2 /* Align buffer to longword boundary */
+ beq+ 1f
+ lhz r5,4(r3) /* do 2 bytes to get aligned */
+ addi r3,r3,2
+ subi r4,r4,2
+ addc r0,r0,r5
+ srwi. r6,r4,2 /* # words to do */
+ beq 3f
+1: mtctr r6
+2: lwzu r5,4(r3) /* the bdnz has zero overhead, so it should */
+ adde r0,r0,r5 /* be unnecessary to unroll this loop */
+ bdnz 2b
+ andi. r4,r4,3
+3: cmpwi 0,r4,2
+ blt+ 4f
+ lhz r5,4(r3)
+ addi r3,r3,2
+ subi r4,r4,2
+ adde r0,r0,r5
+4: cmpwi 0,r4,1
+ bne+ 5f
+ lbz r5,4(r3)
+ slwi r5,r5,8 /* Upper byte of word */
+ adde r0,r0,r5
+5: addze r3,r0 /* add in final carry */
+ blr
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively, and (for an error on
+ * src) zeroes the rest of dst.
+ *
+ * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
+ */
+_GLOBAL(csum_partial_copy_generic)
+ addic r0,r6,0
+ subi r3,r3,4
+ subi r4,r4,4
+ srwi. r6,r5,2
+ beq 3f /* if we're doing < 4 bytes */
+ andi. r9,r4,2 /* Align dst to longword boundary */
+ beq+ 1f
+81: lhz r6,4(r3) /* do 2 bytes to get aligned */
+ addi r3,r3,2
+ subi r5,r5,2
+91: sth r6,4(r4)
+ addi r4,r4,2
+ addc r0,r0,r6
+ srwi. r6,r5,2 /* # words to do */
+ beq 3f
+1: srwi. r6,r5,4 /* # groups of 4 words to do */
+ beq 10f
+ mtctr r6
+71: lwz r6,4(r3)
+72: lwz r9,8(r3)
+73: lwz r10,12(r3)
+74: lwzu r11,16(r3)
+ adde r0,r0,r6
+75: stw r6,4(r4)
+ adde r0,r0,r9
+76: stw r9,8(r4)
+ adde r0,r0,r10
+77: stw r10,12(r4)
+ adde r0,r0,r11
+78: stwu r11,16(r4)
+ bdnz 71b
+10: rlwinm. r6,r5,30,30,31 /* # words left to do */
+ beq 13f
+ mtctr r6
+82: lwzu r9,4(r3)
+92: stwu r9,4(r4)
+ adde r0,r0,r9
+ bdnz 82b
+13: andi. r5,r5,3
+3: cmpwi 0,r5,2
+ blt+ 4f
+83: lhz r6,4(r3)
+ addi r3,r3,2
+ subi r5,r5,2
+93: sth r6,4(r4)
+ addi r4,r4,2
+ adde r0,r0,r6
+4: cmpwi 0,r5,1
+ bne+ 5f
+84: lbz r6,4(r3)
+94: stb r6,4(r4)
+ slwi r6,r6,8 /* Upper byte of word */
+ adde r0,r0,r6
+5: addze r3,r0 /* add in final carry */
+ blr
+
+/* These shouldn't go in the fixup section, since that would
+ cause the ex_table addresses to get out of order. */
+
+src_error_4:
+ mfctr r6 /* update # bytes remaining from ctr */
+ rlwimi r5,r6,4,0,27
+ b 79f
+src_error_1:
+ li r6,0
+ subi r5,r5,2
+95: sth r6,4(r4)
+ addi r4,r4,2
+79: srwi. r6,r5,2
+ beq 3f
+ mtctr r6
+src_error_2:
+ li r6,0
+96: stwu r6,4(r4)
+ bdnz 96b
+3: andi. r5,r5,3
+ beq src_error
+src_error_3:
+ li r6,0
+ mtctr r5
+ addi r4,r4,3
+97: stbu r6,1(r4)
+ bdnz 97b
+src_error:
+ cmpwi 0,r7,0
+ beq 1f
+ li r6,-EFAULT
+ stw r6,0(r7)
+1: addze r3,r0
+ blr
+
+dst_error:
+ cmpwi 0,r8,0
+ beq 1f
+ li r6,-EFAULT
+ stw r6,0(r8)
+1: addze r3,r0
+ blr
+
+.section __ex_table,"a"
+ .long 81b,src_error_1
+ .long 91b,dst_error
+ .long 71b,src_error_4
+ .long 72b,src_error_4
+ .long 73b,src_error_4
+ .long 74b,src_error_4
+ .long 75b,dst_error
+ .long 76b,dst_error
+ .long 77b,dst_error
+ .long 78b,dst_error
+ .long 82b,src_error_2
+ .long 92b,dst_error
+ .long 83b,src_error_3
+ .long 93b,dst_error
+ .long 84b,src_error_3
+ .long 94b,dst_error
+ .long 95b,dst_error
+ .long 96b,dst_error
+ .long 97b,dst_error
diff --git a/arch/powerpc/lib/checksum64.S b/arch/powerpc/lib/checksum64.S
new file mode 100644
index 0000000..ef96c6c
--- /dev/null
+++ b/arch/powerpc/lib/checksum64.S
@@ -0,0 +1,229 @@
+/*
+ * This file contains assembly-language implementations
+ * of IP-style 1's complement checksum routines.
+ *
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
+ */
+
+#include <linux/sys.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+/*
+ * ip_fast_csum(r3=buf, r4=len) -- Optimized for IP header
+ * len is in words and is always >= 5.
+ *
+ * In practice len == 5, but this is not guaranteed. So this code does not
+ * attempt to use doubleword instructions.
+ */
+_GLOBAL(ip_fast_csum)
+ lwz r0,0(r3)
+ lwzu r5,4(r3)
+ addic. r4,r4,-2
+ addc r0,r0,r5
+ mtctr r4
+ blelr-
+1: lwzu r4,4(r3)
+ adde r0,r0,r4
+ bdnz 1b
+ addze r0,r0 /* add in final carry */
+ rldicl r4,r0,32,0 /* fold two 32-bit halves together */
+ add r0,r0,r4
+ srdi r0,r0,32
+ rlwinm r3,r0,16,0,31 /* fold two halves together */
+ add r3,r0,r3
+ not r3,r3
+ srwi r3,r3,16
+ blr
+
+/*
+ * Compute checksum of TCP or UDP pseudo-header:
+ * csum_tcpudp_magic(r3=saddr, r4=daddr, r5=len, r6=proto, r7=sum)
+ * No real gain trying to do this specially for 64 bit, but
+ * the 32 bit addition may spill into the upper bits of
+ * the doubleword so we still must fold it down from 64.
+ */
+_GLOBAL(csum_tcpudp_magic)
+ rlwimi r5,r6,16,0,15 /* put proto in upper half of len */
+ addc r0,r3,r4 /* add 4 32-bit words together */
+ adde r0,r0,r5
+ adde r0,r0,r7
+ rldicl r4,r0,32,0 /* fold 64 bit value */
+ add r0,r4,r0
+ srdi r0,r0,32
+ rlwinm r3,r0,16,0,31 /* fold two halves together */
+ add r3,r0,r3
+ not r3,r3
+ srwi r3,r3,16
+ blr
+
+/*
+ * Computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit).
+ *
+ * This code assumes at least halfword alignment, though the length
+ * can be any number of bytes. The sum is accumulated in r5.
+ *
+ * csum_partial(r3=buff, r4=len, r5=sum)
+ */
+_GLOBAL(csum_partial)
+ subi r3,r3,8 /* we'll offset by 8 for the loads */
+ srdi. r6,r4,3 /* divide by 8 for doubleword count */
+ addic r5,r5,0 /* clear carry */
+ beq 3f /* if we're doing < 8 bytes */
+ andi. r0,r3,2 /* aligned on a word boundary already? */
+ beq+ 1f
+ lhz r6,8(r3) /* do 2 bytes to get aligned */
+ addi r3,r3,2
+ subi r4,r4,2
+ addc r5,r5,r6
+ srdi. r6,r4,3 /* recompute number of doublewords */
+ beq 3f /* any left? */
+1: mtctr r6
+2: ldu r6,8(r3) /* main sum loop */
+ adde r5,r5,r6
+ bdnz 2b
+ andi. r4,r4,7 /* compute bytes left to sum after doublewords */
+3: cmpwi 0,r4,4 /* is at least a full word left? */
+ blt 4f
+ lwz r6,8(r3) /* sum this word */
+ addi r3,r3,4
+ subi r4,r4,4
+ adde r5,r5,r6
+4: cmpwi 0,r4,2 /* is at least a halfword left? */
+ blt+ 5f
+ lhz r6,8(r3) /* sum this halfword */
+ addi r3,r3,2
+ subi r4,r4,2
+ adde r5,r5,r6
+5: cmpwi 0,r4,1 /* is at least a byte left? */
+ bne+ 6f
+ lbz r6,8(r3) /* sum this byte */
+ slwi r6,r6,8 /* this byte is assumed to be the upper byte of a halfword */
+ adde r5,r5,r6
+6: addze r5,r5 /* add in final carry */
+ rldicl r4,r5,32,0 /* fold two 32-bit halves together */
+ add r3,r4,r5
+ srdi r3,r3,32
+ blr
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively, and (for an error on
+ * src) zeroes the rest of dst.
+ *
+ * This code needs to be reworked to take advantage of 64 bit sum+copy.
+ * However, due to tokenring halfword alignment problems this will be very
+ * tricky. For now we'll leave it until we instrument it somehow.
+ *
+ * csum_partial_copy_generic(r3=src, r4=dst, r5=len, r6=sum, r7=src_err, r8=dst_err)
+ */
+_GLOBAL(csum_partial_copy_generic)
+ addic r0,r6,0
+ subi r3,r3,4
+ subi r4,r4,4
+ srwi. r6,r5,2
+ beq 3f /* if we're doing < 4 bytes */
+ andi. r9,r4,2 /* Align dst to longword boundary */
+ beq+ 1f
+81: lhz r6,4(r3) /* do 2 bytes to get aligned */
+ addi r3,r3,2
+ subi r5,r5,2
+91: sth r6,4(r4)
+ addi r4,r4,2
+ addc r0,r0,r6
+ srwi. r6,r5,2 /* # words to do */
+ beq 3f
+1: mtctr r6
+82: lwzu r6,4(r3) /* the bdnz has zero overhead, so it should */
+92: stwu r6,4(r4) /* be unnecessary to unroll this loop */
+ adde r0,r0,r6
+ bdnz 82b
+ andi. r5,r5,3
+3: cmpwi 0,r5,2
+ blt+ 4f
+83: lhz r6,4(r3)
+ addi r3,r3,2
+ subi r5,r5,2
+93: sth r6,4(r4)
+ addi r4,r4,2
+ adde r0,r0,r6
+4: cmpwi 0,r5,1
+ bne+ 5f
+84: lbz r6,4(r3)
+94: stb r6,4(r4)
+ slwi r6,r6,8 /* Upper byte of word */
+ adde r0,r0,r6
+5: addze r3,r0 /* add in final carry (unlikely with 64-bit regs) */
+ rldicl r4,r3,32,0 /* fold 64 bit value */
+ add r3,r4,r3
+ srdi r3,r3,32
+ blr
+
+/* These shouldn't go in the fixup section, since that would
+ cause the ex_table addresses to get out of order. */
+
+ .globl src_error_1
+src_error_1:
+ li r6,0
+ subi r5,r5,2
+95: sth r6,4(r4)
+ addi r4,r4,2
+ srwi. r6,r5,2
+ beq 3f
+ mtctr r6
+ .globl src_error_2
+src_error_2:
+ li r6,0
+96: stwu r6,4(r4)
+ bdnz 96b
+3: andi. r5,r5,3
+ beq src_error
+ .globl src_error_3
+src_error_3:
+ li r6,0
+ mtctr r5
+ addi r4,r4,3
+97: stbu r6,1(r4)
+ bdnz 97b
+ .globl src_error
+src_error:
+ cmpdi 0,r7,0
+ beq 1f
+ li r6,-EFAULT
+ stw r6,0(r7)
+1: addze r3,r0
+ blr
+
+ .globl dst_error
+dst_error:
+ cmpdi 0,r8,0
+ beq 1f
+ li r6,-EFAULT
+ stw r6,0(r8)
+1: addze r3,r0
+ blr
+
+.section __ex_table,"a"
+ .align 3
+ .llong 81b,src_error_1
+ .llong 91b,dst_error
+ .llong 82b,src_error_2
+ .llong 92b,dst_error
+ .llong 83b,src_error_3
+ .llong 93b,dst_error
+ .llong 84b,src_error_3
+ .llong 94b,dst_error
+ .llong 95b,dst_error
+ .llong 96b,dst_error
+ .llong 97b,dst_error
diff --git a/arch/powerpc/lib/copy32.S b/arch/powerpc/lib/copy32.S
new file mode 100644
index 0000000..420a912
--- /dev/null
+++ b/arch/powerpc/lib/copy32.S
@@ -0,0 +1,543 @@
+/*
+ * Memory copy functions for 32-bit PowerPC.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+#define COPY_16_BYTES \
+ lwz r7,4(r4); \
+ lwz r8,8(r4); \
+ lwz r9,12(r4); \
+ lwzu r10,16(r4); \
+ stw r7,4(r6); \
+ stw r8,8(r6); \
+ stw r9,12(r6); \
+ stwu r10,16(r6)
+
+#define COPY_16_BYTES_WITHEX(n) \
+8 ## n ## 0: \
+ lwz r7,4(r4); \
+8 ## n ## 1: \
+ lwz r8,8(r4); \
+8 ## n ## 2: \
+ lwz r9,12(r4); \
+8 ## n ## 3: \
+ lwzu r10,16(r4); \
+8 ## n ## 4: \
+ stw r7,4(r6); \
+8 ## n ## 5: \
+ stw r8,8(r6); \
+8 ## n ## 6: \
+ stw r9,12(r6); \
+8 ## n ## 7: \
+ stwu r10,16(r6)
+
+#define COPY_16_BYTES_EXCODE(n) \
+9 ## n ## 0: \
+ addi r5,r5,-(16 * n); \
+ b 104f; \
+9 ## n ## 1: \
+ addi r5,r5,-(16 * n); \
+ b 105f; \
+.section __ex_table,"a"; \
+ .align 2; \
+ .long 8 ## n ## 0b,9 ## n ## 0b; \
+ .long 8 ## n ## 1b,9 ## n ## 0b; \
+ .long 8 ## n ## 2b,9 ## n ## 0b; \
+ .long 8 ## n ## 3b,9 ## n ## 0b; \
+ .long 8 ## n ## 4b,9 ## n ## 1b; \
+ .long 8 ## n ## 5b,9 ## n ## 1b; \
+ .long 8 ## n ## 6b,9 ## n ## 1b; \
+ .long 8 ## n ## 7b,9 ## n ## 1b; \
+ .text
+
+ .text
+ .stabs "arch/powerpc/lib/",N_SO,0,0,0f
+ .stabs "copy32.S",N_SO,0,0,0f
+0:
+
+CACHELINE_BYTES = L1_CACHE_LINE_SIZE
+LG_CACHELINE_BYTES = LG_L1_CACHE_LINE_SIZE
+CACHELINE_MASK = (L1_CACHE_LINE_SIZE-1)
+
+/*
+ * Use dcbz on the complete cache lines in the destination
+ * to set them to zero. This requires that the destination
+ * area is cacheable. -- paulus
+ */
+_GLOBAL(cacheable_memzero)
+ mr r5,r4
+ li r4,0
+ addi r6,r3,-4
+ cmplwi 0,r5,4
+ blt 7f
+ stwu r4,4(r6)
+ beqlr
+ andi. r0,r6,3
+ add r5,r0,r5
+ subf r6,r0,r6
+ clrlwi r7,r6,32-LG_CACHELINE_BYTES
+ add r8,r7,r5
+ srwi r9,r8,LG_CACHELINE_BYTES
+ addic. r9,r9,-1 /* total number of complete cachelines */
+ ble 2f
+ xori r0,r7,CACHELINE_MASK & ~3
+ srwi. r0,r0,2
+ beq 3f
+ mtctr r0
+4: stwu r4,4(r6)
+ bdnz 4b
+3: mtctr r9
+ li r7,4
+#if !defined(CONFIG_8xx)
+10: dcbz r7,r6
+#else
+10: stw r4, 4(r6)
+ stw r4, 8(r6)
+ stw r4, 12(r6)
+ stw r4, 16(r6)
+#if CACHE_LINE_SIZE >= 32
+ stw r4, 20(r6)
+ stw r4, 24(r6)
+ stw r4, 28(r6)
+ stw r4, 32(r6)
+#endif /* CACHE_LINE_SIZE */
+#endif
+ addi r6,r6,CACHELINE_BYTES
+ bdnz 10b
+ clrlwi r5,r8,32-LG_CACHELINE_BYTES
+ addi r5,r5,4
+2: srwi r0,r5,2
+ mtctr r0
+ bdz 6f
+1: stwu r4,4(r6)
+ bdnz 1b
+6: andi. r5,r5,3
+7: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r6,r6,3
+8: stbu r4,1(r6)
+ bdnz 8b
+ blr
+
+_GLOBAL(memset)
+ rlwimi r4,r4,8,16,23
+ rlwimi r4,r4,16,0,15
+ addi r6,r3,-4
+ cmplwi 0,r5,4
+ blt 7f
+ stwu r4,4(r6)
+ beqlr
+ andi. r0,r6,3
+ add r5,r0,r5
+ subf r6,r0,r6
+ srwi r0,r5,2
+ mtctr r0
+ bdz 6f
+1: stwu r4,4(r6)
+ bdnz 1b
+6: andi. r5,r5,3
+7: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r6,r6,3
+8: stbu r4,1(r6)
+ bdnz 8b
+ blr
+
+/*
+ * This version uses dcbz on the complete cache lines in the
+ * destination area to reduce memory traffic. This requires that
+ * the destination area is cacheable.
+ * We only use this version if the source and dest don't overlap.
+ * -- paulus.
+ */
+_GLOBAL(cacheable_memcpy)
+ add r7,r3,r5 /* test if the src & dst overlap */
+ add r8,r4,r5
+ cmplw 0,r4,r7
+ cmplw 1,r3,r8
+ crand 0,0,4 /* cr0.lt &= cr1.lt */
+ blt memcpy /* if regions overlap */
+
+ addi r4,r4,-4
+ addi r6,r3,-4
+ neg r0,r3
+ andi. r0,r0,CACHELINE_MASK /* # bytes to start of cache line */
+ beq 58f
+
+ cmplw 0,r5,r0 /* is this more than total to do? */
+ blt 63f /* if not much to do */
+ andi. r8,r0,3 /* get it word-aligned first */
+ subf r5,r0,r5
+ mtctr r8
+ beq+ 61f
+70: lbz r9,4(r4) /* do some bytes */
+ stb r9,4(r6)
+ addi r4,r4,1
+ addi r6,r6,1
+ bdnz 70b
+61: srwi. r0,r0,2
+ mtctr r0
+ beq 58f
+72: lwzu r9,4(r4) /* do some words */
+ stwu r9,4(r6)
+ bdnz 72b
+
+58: srwi. r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+ clrlwi r5,r5,32-LG_CACHELINE_BYTES
+ li r11,4
+ mtctr r0
+ beq 63f
+53:
+#if !defined(CONFIG_8xx)
+ dcbz r11,r6
+#endif
+ COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 32
+ COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 64
+ COPY_16_BYTES
+ COPY_16_BYTES
+#if L1_CACHE_LINE_SIZE >= 128
+ COPY_16_BYTES
+ COPY_16_BYTES
+ COPY_16_BYTES
+ COPY_16_BYTES
+#endif
+#endif
+#endif
+ bdnz 53b
+
+63: srwi. r0,r5,2
+ mtctr r0
+ beq 64f
+30: lwzu r0,4(r4)
+ stwu r0,4(r6)
+ bdnz 30b
+
+64: andi. r0,r5,3
+ mtctr r0
+ beq+ 65f
+40: lbz r0,4(r4)
+ stb r0,4(r6)
+ addi r4,r4,1
+ addi r6,r6,1
+ bdnz 40b
+65: blr
+
+_GLOBAL(memmove)
+ cmplw 0,r3,r4
+ bgt backwards_memcpy
+ /* fall through */
+
+_GLOBAL(memcpy)
+ srwi. r7,r5,3
+ addi r6,r3,-4
+ addi r4,r4,-4
+ beq 2f /* if less than 8 bytes to do */
+ andi. r0,r6,3 /* get dest word aligned */
+ mtctr r7
+ bne 5f
+1: lwz r7,4(r4)
+ lwzu r8,8(r4)
+ stw r7,4(r6)
+ stwu r8,8(r6)
+ bdnz 1b
+ andi. r5,r5,7
+2: cmplwi 0,r5,4
+ blt 3f
+ lwzu r0,4(r4)
+ addi r5,r5,-4
+ stwu r0,4(r6)
+3: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r4,r4,3
+ addi r6,r6,3
+4: lbzu r0,1(r4)
+ stbu r0,1(r6)
+ bdnz 4b
+ blr
+5: subfic r0,r0,4
+ mtctr r0
+6: lbz r7,4(r4)
+ addi r4,r4,1
+ stb r7,4(r6)
+ addi r6,r6,1
+ bdnz 6b
+ subf r5,r0,r5
+ rlwinm. r7,r5,32-3,3,31
+ beq 2b
+ mtctr r7
+ b 1b
+
+_GLOBAL(backwards_memcpy)
+ rlwinm. r7,r5,32-3,3,31 /* r0 = r5 >> 3 */
+ add r6,r3,r5
+ add r4,r4,r5
+ beq 2f
+ andi. r0,r6,3
+ mtctr r7
+ bne 5f
+1: lwz r7,-4(r4)
+ lwzu r8,-8(r4)
+ stw r7,-4(r6)
+ stwu r8,-8(r6)
+ bdnz 1b
+ andi. r5,r5,7
+2: cmplwi 0,r5,4
+ blt 3f
+ lwzu r0,-4(r4)
+ subi r5,r5,4
+ stwu r0,-4(r6)
+3: cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+4: lbzu r0,-1(r4)
+ stbu r0,-1(r6)
+ bdnz 4b
+ blr
+5: mtctr r0
+6: lbzu r7,-1(r4)
+ stbu r7,-1(r6)
+ bdnz 6b
+ subf r5,r0,r5
+ rlwinm. r7,r5,32-3,3,31
+ beq 2b
+ mtctr r7
+ b 1b
+
+_GLOBAL(__copy_tofrom_user)
+ addi r4,r4,-4
+ addi r6,r3,-4
+ neg r0,r3
+ andi. r0,r0,CACHELINE_MASK /* # bytes to start of cache line */
+ beq 58f
+
+ cmplw 0,r5,r0 /* is this more than total to do? */
+ blt 63f /* if not much to do */
+ andi. r8,r0,3 /* get it word-aligned first */
+ mtctr r8
+ beq+ 61f
+70: lbz r9,4(r4) /* do some bytes */
+71: stb r9,4(r6)
+ addi r4,r4,1
+ addi r6,r6,1
+ bdnz 70b
+61: subf r5,r0,r5
+ srwi. r0,r0,2
+ mtctr r0
+ beq 58f
+72: lwzu r9,4(r4) /* do some words */
+73: stwu r9,4(r6)
+ bdnz 72b
+
+ .section __ex_table,"a"
+ .align 2
+ .long 70b,100f
+ .long 71b,101f
+ .long 72b,102f
+ .long 73b,103f
+ .text
+
+58: srwi. r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
+ clrlwi r5,r5,32-LG_CACHELINE_BYTES
+ li r11,4
+ beq 63f
+
+#ifdef CONFIG_8xx
+ /* Don't use prefetch on 8xx */
+ mtctr r0
+ li r0,0
+53: COPY_16_BYTES_WITHEX(0)
+ bdnz 53b
+
+#else /* not CONFIG_8xx */
+ /* Here we decide how far ahead to prefetch the source */
+ li r3,4
+ cmpwi r0,1
+ li r7,0
+ ble 114f
+ li r7,1
+#if MAX_COPY_PREFETCH > 1
+ /* Heuristically, for large transfers we prefetch
+ MAX_COPY_PREFETCH cachelines ahead. For small transfers
+ we prefetch 1 cacheline ahead. */
+ cmpwi r0,MAX_COPY_PREFETCH
+ ble 112f
+ li r7,MAX_COPY_PREFETCH
+112: mtctr r7
+111: dcbt r3,r4
+ addi r3,r3,CACHELINE_BYTES
+ bdnz 111b
+#else
+ dcbt r3,r4
+ addi r3,r3,CACHELINE_BYTES
+#endif /* MAX_COPY_PREFETCH > 1 */
+
+114: subf r8,r7,r0
+ mr r0,r7
+ mtctr r8
+
+53: dcbt r3,r4
+54: dcbz r11,r6
+ .section __ex_table,"a"
+ .align 2
+ .long 54b,105f
+ .text
+/* the main body of the cacheline loop */
+ COPY_16_BYTES_WITHEX(0)
+#if L1_CACHE_LINE_SIZE >= 32
+ COPY_16_BYTES_WITHEX(1)
+#if L1_CACHE_LINE_SIZE >= 64
+ COPY_16_BYTES_WITHEX(2)
+ COPY_16_BYTES_WITHEX(3)
+#if L1_CACHE_LINE_SIZE >= 128
+ COPY_16_BYTES_WITHEX(4)
+ COPY_16_BYTES_WITHEX(5)
+ COPY_16_BYTES_WITHEX(6)
+ COPY_16_BYTES_WITHEX(7)
+#endif
+#endif
+#endif
+ bdnz 53b
+ cmpwi r0,0
+ li r3,4
+ li r7,0
+ bne 114b
+#endif /* CONFIG_8xx */
+
+63: srwi. r0,r5,2
+ mtctr r0
+ beq 64f
+30: lwzu r0,4(r4)
+31: stwu r0,4(r6)
+ bdnz 30b
+
+64: andi. r0,r5,3
+ mtctr r0
+ beq+ 65f
+40: lbz r0,4(r4)
+41: stb r0,4(r6)
+ addi r4,r4,1
+ addi r6,r6,1
+ bdnz 40b
+65: li r3,0
+ blr
+
+/* read fault, initial single-byte copy */
+100: li r9,0
+ b 90f
+/* write fault, initial single-byte copy */
+101: li r9,1
+90: subf r5,r8,r5
+ li r3,0
+ b 99f
+/* read fault, initial word copy */
+102: li r9,0
+ b 91f
+/* write fault, initial word copy */
+103: li r9,1
+91: li r3,2
+ b 99f
+
+/*
+ * this stuff handles faults in the cacheline loop and branches to either
+ * 104f (if in read part) or 105f (if in write part), after updating r5
+ */
+ COPY_16_BYTES_EXCODE(0)
+#if L1_CACHE_LINE_SIZE >= 32
+ COPY_16_BYTES_EXCODE(1)
+#if L1_CACHE_LINE_SIZE >= 64
+ COPY_16_BYTES_EXCODE(2)
+ COPY_16_BYTES_EXCODE(3)
+#if L1_CACHE_LINE_SIZE >= 128
+ COPY_16_BYTES_EXCODE(4)
+ COPY_16_BYTES_EXCODE(5)
+ COPY_16_BYTES_EXCODE(6)
+ COPY_16_BYTES_EXCODE(7)
+#endif
+#endif
+#endif
+
+/* read fault in cacheline loop */
+104: li r9,0
+ b 92f
+/* fault on dcbz (effectively a write fault) */
+/* or write fault in cacheline loop */
+105: li r9,1
+92: li r3,LG_CACHELINE_BYTES
+ mfctr r8
+ add r0,r0,r8
+ b 106f
+/* read fault in final word loop */
+108: li r9,0
+ b 93f
+/* write fault in final word loop */
+109: li r9,1
+93: andi. r5,r5,3
+ li r3,2
+ b 99f
+/* read fault in final byte loop */
+110: li r9,0
+ b 94f
+/* write fault in final byte loop */
+111: li r9,1
+94: li r5,0
+ li r3,0
+/*
+ * At this stage the number of bytes not copied is
+ * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
+ */
+99: mfctr r0
+106: slw r3,r0,r3
+ add. r3,r3,r5
+ beq 120f /* shouldn't happen */
+ cmpwi 0,r9,0
+ bne 120f
+/* for a read fault, first try to continue the copy one byte at a time */
+ mtctr r3
+130: lbz r0,4(r4)
+131: stb r0,4(r6)
+ addi r4,r4,1
+ addi r6,r6,1
+ bdnz 130b
+/* then clear out the destination: r3 bytes starting at 4(r6) */
+132: mfctr r3
+ srwi. r0,r3,2
+ li r9,0
+ mtctr r0
+ beq 113f
+112: stwu r9,4(r6)
+ bdnz 112b
+113: andi. r0,r3,3
+ mtctr r0
+ beq 120f
+114: stb r9,4(r6)
+ addi r6,r6,1
+ bdnz 114b
+120: blr
+
+ .section __ex_table,"a"
+ .align 2
+ .long 30b,108b
+ .long 31b,109b
+ .long 40b,110b
+ .long 41b,111b
+ .long 130b,132b
+ .long 131b,120b
+ .long 112b,120b
+ .long 114b,120b
+ .text
diff --git a/arch/powerpc/lib/copypage.S b/arch/powerpc/lib/copypage.S
new file mode 100644
index 0000000..733d616
--- /dev/null
+++ b/arch/powerpc/lib/copypage.S
@@ -0,0 +1,121 @@
+/*
+ * arch/ppc64/lib/copypage.S
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+
+_GLOBAL(copy_page)
+ std r31,-8(1)
+ std r30,-16(1)
+ std r29,-24(1)
+ std r28,-32(1)
+ std r27,-40(1)
+ std r26,-48(1)
+ std r25,-56(1)
+ std r24,-64(1)
+ std r23,-72(1)
+ std r22,-80(1)
+ std r21,-88(1)
+ std r20,-96(1)
+ li r5,4096/32 - 1
+ addi r3,r3,-8
+ li r12,5
+0: addi r5,r5,-24
+ mtctr r12
+ ld r22,640(4)
+ ld r21,512(4)
+ ld r20,384(4)
+ ld r11,256(4)
+ ld r9,128(4)
+ ld r7,0(4)
+ ld r25,648(4)
+ ld r24,520(4)
+ ld r23,392(4)
+ ld r10,264(4)
+ ld r8,136(4)
+ ldu r6,8(4)
+ cmpwi r5,24
+1: std r22,648(3)
+ std r21,520(3)
+ std r20,392(3)
+ std r11,264(3)
+ std r9,136(3)
+ std r7,8(3)
+ ld r28,648(4)
+ ld r27,520(4)
+ ld r26,392(4)
+ ld r31,264(4)
+ ld r30,136(4)
+ ld r29,8(4)
+ std r25,656(3)
+ std r24,528(3)
+ std r23,400(3)
+ std r10,272(3)
+ std r8,144(3)
+ std r6,16(3)
+ ld r22,656(4)
+ ld r21,528(4)
+ ld r20,400(4)
+ ld r11,272(4)
+ ld r9,144(4)
+ ld r7,16(4)
+ std r28,664(3)
+ std r27,536(3)
+ std r26,408(3)
+ std r31,280(3)
+ std r30,152(3)
+ stdu r29,24(3)
+ ld r25,664(4)
+ ld r24,536(4)
+ ld r23,408(4)
+ ld r10,280(4)
+ ld r8,152(4)
+ ldu r6,24(4)
+ bdnz 1b
+ std r22,648(3)
+ std r21,520(3)
+ std r20,392(3)
+ std r11,264(3)
+ std r9,136(3)
+ std r7,8(3)
+ addi r4,r4,640
+ addi r3,r3,648
+ bge 0b
+ mtctr r5
+ ld r7,0(4)
+ ld r8,8(4)
+ ldu r9,16(4)
+3: ld r10,8(4)
+ std r7,8(3)
+ ld r7,16(4)
+ std r8,16(3)
+ ld r8,24(4)
+ std r9,24(3)
+ ldu r9,32(4)
+ stdu r10,32(3)
+ bdnz 3b
+4: ld r10,8(4)
+ std r7,8(3)
+ std r8,16(3)
+ std r9,24(3)
+ std r10,32(3)
+9: ld r20,-96(1)
+ ld r21,-88(1)
+ ld r22,-80(1)
+ ld r23,-72(1)
+ ld r24,-64(1)
+ ld r25,-56(1)
+ ld r26,-48(1)
+ ld r27,-40(1)
+ ld r28,-32(1)
+ ld r29,-24(1)
+ ld r30,-16(1)
+ ld r31,-8(1)
+ blr
diff --git a/arch/powerpc/lib/copyuser.S b/arch/powerpc/lib/copyuser.S
new file mode 100644
index 0000000..a0b3fbb
--- /dev/null
+++ b/arch/powerpc/lib/copyuser.S
@@ -0,0 +1,576 @@
+/*
+ * arch/ppc64/lib/copyuser.S
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+
+ .align 7
+_GLOBAL(__copy_tofrom_user)
+ /* first check for a whole page copy on a page boundary */
+ cmpldi cr1,r5,16
+ cmpdi cr6,r5,4096
+ or r0,r3,r4
+ neg r6,r3 /* LS 3 bits = # bytes to 8-byte dest bdry */
+ andi. r0,r0,4095
+ std r3,-24(r1)
+ crand cr0*4+2,cr0*4+2,cr6*4+2
+ std r4,-16(r1)
+ std r5,-8(r1)
+ dcbt 0,r4
+ beq .Lcopy_page
+ andi. r6,r6,7
+ mtcrf 0x01,r5
+ blt cr1,.Lshort_copy
+ bne .Ldst_unaligned
+.Ldst_aligned:
+ andi. r0,r4,7
+ addi r3,r3,-16
+ bne .Lsrc_unaligned
+ srdi r7,r5,4
+20: ld r9,0(r4)
+ addi r4,r4,-8
+ mtctr r7
+ andi. r5,r5,7
+ bf cr7*4+0,22f
+ addi r3,r3,8
+ addi r4,r4,8
+ mr r8,r9
+ blt cr1,72f
+21: ld r9,8(r4)
+70: std r8,8(r3)
+22: ldu r8,16(r4)
+71: stdu r9,16(r3)
+ bdnz 21b
+72: std r8,8(r3)
+ beq+ 3f
+ addi r3,r3,16
+23: ld r9,8(r4)
+.Ldo_tail:
+ bf cr7*4+1,1f
+ rotldi r9,r9,32
+73: stw r9,0(r3)
+ addi r3,r3,4
+1: bf cr7*4+2,2f
+ rotldi r9,r9,16
+74: sth r9,0(r3)
+ addi r3,r3,2
+2: bf cr7*4+3,3f
+ rotldi r9,r9,8
+75: stb r9,0(r3)
+3: li r3,0
+ blr
+
+.Lsrc_unaligned:
+ srdi r6,r5,3
+ addi r5,r5,-16
+ subf r4,r0,r4
+ srdi r7,r5,4
+ sldi r10,r0,3
+ cmpldi cr6,r6,3
+ andi. r5,r5,7
+ mtctr r7
+ subfic r11,r10,64
+ add r5,r5,r0
+ bt cr7*4+0,28f
+
+24: ld r9,0(r4) /* 3+2n loads, 2+2n stores */
+25: ld r0,8(r4)
+ sld r6,r9,r10
+26: ldu r9,16(r4)
+ srd r7,r0,r11
+ sld r8,r0,r10
+ or r7,r7,r6
+ blt cr6,79f
+27: ld r0,8(r4)
+ b 2f
+
+28: ld r0,0(r4) /* 4+2n loads, 3+2n stores */
+29: ldu r9,8(r4)
+ sld r8,r0,r10
+ addi r3,r3,-8
+ blt cr6,5f
+30: ld r0,8(r4)
+ srd r12,r9,r11
+ sld r6,r9,r10
+31: ldu r9,16(r4)
+ or r12,r8,r12
+ srd r7,r0,r11
+ sld r8,r0,r10
+ addi r3,r3,16
+ beq cr6,78f
+
+1: or r7,r7,r6
+32: ld r0,8(r4)
+76: std r12,8(r3)
+2: srd r12,r9,r11
+ sld r6,r9,r10
+33: ldu r9,16(r4)
+ or r12,r8,r12
+77: stdu r7,16(r3)
+ srd r7,r0,r11
+ sld r8,r0,r10
+ bdnz 1b
+
+78: std r12,8(r3)
+ or r7,r7,r6
+79: std r7,16(r3)
+5: srd r12,r9,r11
+ or r12,r8,r12
+80: std r12,24(r3)
+ bne 6f
+ li r3,0
+ blr
+6: cmpwi cr1,r5,8
+ addi r3,r3,32
+ sld r9,r9,r10
+ ble cr1,.Ldo_tail
+34: ld r0,8(r4)
+ srd r7,r0,r11
+ or r9,r7,r9
+ b .Ldo_tail
+
+.Ldst_unaligned:
+ mtcrf 0x01,r6 /* put #bytes to 8B bdry into cr7 */
+ subf r5,r6,r5
+ li r7,0
+ cmpldi r1,r5,16
+ bf cr7*4+3,1f
+35: lbz r0,0(r4)
+81: stb r0,0(r3)
+ addi r7,r7,1
+1: bf cr7*4+2,2f
+36: lhzx r0,r7,r4
+82: sthx r0,r7,r3
+ addi r7,r7,2
+2: bf cr7*4+1,3f
+37: lwzx r0,r7,r4
+83: stwx r0,r7,r3
+3: mtcrf 0x01,r5
+ add r4,r6,r4
+ add r3,r6,r3
+ b .Ldst_aligned
+
+.Lshort_copy:
+ bf cr7*4+0,1f
+38: lwz r0,0(r4)
+39: lwz r9,4(r4)
+ addi r4,r4,8
+84: stw r0,0(r3)
+85: stw r9,4(r3)
+ addi r3,r3,8
+1: bf cr7*4+1,2f
+40: lwz r0,0(r4)
+ addi r4,r4,4
+86: stw r0,0(r3)
+ addi r3,r3,4
+2: bf cr7*4+2,3f
+41: lhz r0,0(r4)
+ addi r4,r4,2
+87: sth r0,0(r3)
+ addi r3,r3,2
+3: bf cr7*4+3,4f
+42: lbz r0,0(r4)
+88: stb r0,0(r3)
+4: li r3,0
+ blr
+
+/*
+ * exception handlers follow
+ * we have to return the number of bytes not copied
+ * for an exception on a load, we set the rest of the destination to 0
+ */
+
+136:
+137:
+ add r3,r3,r7
+ b 1f
+130:
+131:
+ addi r3,r3,8
+120:
+122:
+124:
+125:
+126:
+127:
+128:
+129:
+133:
+ addi r3,r3,8
+121:
+132:
+ addi r3,r3,8
+123:
+134:
+135:
+138:
+139:
+140:
+141:
+142:
+
+/*
+ * here we have had a fault on a load and r3 points to the first
+ * unmodified byte of the destination
+ */
+1: ld r6,-24(r1)
+ ld r4,-16(r1)
+ ld r5,-8(r1)
+ subf r6,r6,r3
+ add r4,r4,r6
+ subf r5,r6,r5 /* #bytes left to go */
+
+/*
+ * first see if we can copy any more bytes before hitting another exception
+ */
+ mtctr r5
+43: lbz r0,0(r4)
+ addi r4,r4,1
+89: stb r0,0(r3)
+ addi r3,r3,1
+ bdnz 43b
+ li r3,0 /* huh? all copied successfully this time? */
+ blr
+
+/*
+ * here we have trapped again, need to clear ctr bytes starting at r3
+ */
+143: mfctr r5
+ li r0,0
+ mr r4,r3
+ mr r3,r5 /* return the number of bytes not copied */
+1: andi. r9,r4,7
+ beq 3f
+90: stb r0,0(r4)
+ addic. r5,r5,-1
+ addi r4,r4,1
+ bne 1b
+ blr
+3: cmpldi cr1,r5,8
+ srdi r9,r5,3
+ andi. r5,r5,7
+ blt cr1,93f
+ mtctr r9
+91: std r0,0(r4)
+ addi r4,r4,8
+ bdnz 91b
+93: beqlr
+ mtctr r5
+92: stb r0,0(r4)
+ addi r4,r4,1
+ bdnz 92b
+ blr
+
+/*
+ * exception handlers for stores: we just need to work
+ * out how many bytes weren't copied
+ */
+182:
+183:
+ add r3,r3,r7
+ b 1f
+180:
+ addi r3,r3,8
+171:
+177:
+ addi r3,r3,8
+170:
+172:
+176:
+178:
+ addi r3,r3,4
+185:
+ addi r3,r3,4
+173:
+174:
+175:
+179:
+181:
+184:
+186:
+187:
+188:
+189:
+1:
+ ld r6,-24(r1)
+ ld r5,-8(r1)
+ add r6,r6,r5
+ subf r3,r3,r6 /* #bytes not copied */
+190:
+191:
+192:
+ blr /* #bytes not copied in r3 */
+
+ .section __ex_table,"a"
+ .align 3
+ .llong 20b,120b
+ .llong 21b,121b
+ .llong 70b,170b
+ .llong 22b,122b
+ .llong 71b,171b
+ .llong 72b,172b
+ .llong 23b,123b
+ .llong 73b,173b
+ .llong 74b,174b
+ .llong 75b,175b
+ .llong 24b,124b
+ .llong 25b,125b
+ .llong 26b,126b
+ .llong 27b,127b
+ .llong 28b,128b
+ .llong 29b,129b
+ .llong 30b,130b
+ .llong 31b,131b
+ .llong 32b,132b
+ .llong 76b,176b
+ .llong 33b,133b
+ .llong 77b,177b
+ .llong 78b,178b
+ .llong 79b,179b
+ .llong 80b,180b
+ .llong 34b,134b
+ .llong 35b,135b
+ .llong 81b,181b
+ .llong 36b,136b
+ .llong 82b,182b
+ .llong 37b,137b
+ .llong 83b,183b
+ .llong 38b,138b
+ .llong 39b,139b
+ .llong 84b,184b
+ .llong 85b,185b
+ .llong 40b,140b
+ .llong 86b,186b
+ .llong 41b,141b
+ .llong 87b,187b
+ .llong 42b,142b
+ .llong 88b,188b
+ .llong 43b,143b
+ .llong 89b,189b
+ .llong 90b,190b
+ .llong 91b,191b
+ .llong 92b,192b
+
+ .text
+
+/*
+ * Routine to copy a whole page of data, optimized for POWER4.
+ * On POWER4 it is more than 50% faster than the simple loop
+ * above (following the .Ldst_aligned label) but it runs slightly
+ * slower on POWER3.
+ */
+.Lcopy_page:
+ std r31,-32(1)
+ std r30,-40(1)
+ std r29,-48(1)
+ std r28,-56(1)
+ std r27,-64(1)
+ std r26,-72(1)
+ std r25,-80(1)
+ std r24,-88(1)
+ std r23,-96(1)
+ std r22,-104(1)
+ std r21,-112(1)
+ std r20,-120(1)
+ li r5,4096/32 - 1
+ addi r3,r3,-8
+ li r0,5
+0: addi r5,r5,-24
+ mtctr r0
+20: ld r22,640(4)
+21: ld r21,512(4)
+22: ld r20,384(4)
+23: ld r11,256(4)
+24: ld r9,128(4)
+25: ld r7,0(4)
+26: ld r25,648(4)
+27: ld r24,520(4)
+28: ld r23,392(4)
+29: ld r10,264(4)
+30: ld r8,136(4)
+31: ldu r6,8(4)
+ cmpwi r5,24
+1:
+32: std r22,648(3)
+33: std r21,520(3)
+34: std r20,392(3)
+35: std r11,264(3)
+36: std r9,136(3)
+37: std r7,8(3)
+38: ld r28,648(4)
+39: ld r27,520(4)
+40: ld r26,392(4)
+41: ld r31,264(4)
+42: ld r30,136(4)
+43: ld r29,8(4)
+44: std r25,656(3)
+45: std r24,528(3)
+46: std r23,400(3)
+47: std r10,272(3)
+48: std r8,144(3)
+49: std r6,16(3)
+50: ld r22,656(4)
+51: ld r21,528(4)
+52: ld r20,400(4)
+53: ld r11,272(4)
+54: ld r9,144(4)
+55: ld r7,16(4)
+56: std r28,664(3)
+57: std r27,536(3)
+58: std r26,408(3)
+59: std r31,280(3)
+60: std r30,152(3)
+61: stdu r29,24(3)
+62: ld r25,664(4)
+63: ld r24,536(4)
+64: ld r23,408(4)
+65: ld r10,280(4)
+66: ld r8,152(4)
+67: ldu r6,24(4)
+ bdnz 1b
+68: std r22,648(3)
+69: std r21,520(3)
+70: std r20,392(3)
+71: std r11,264(3)
+72: std r9,136(3)
+73: std r7,8(3)
+74: addi r4,r4,640
+75: addi r3,r3,648
+ bge 0b
+ mtctr r5
+76: ld r7,0(4)
+77: ld r8,8(4)
+78: ldu r9,16(4)
+3:
+79: ld r10,8(4)
+80: std r7,8(3)
+81: ld r7,16(4)
+82: std r8,16(3)
+83: ld r8,24(4)
+84: std r9,24(3)
+85: ldu r9,32(4)
+86: stdu r10,32(3)
+ bdnz 3b
+4:
+87: ld r10,8(4)
+88: std r7,8(3)
+89: std r8,16(3)
+90: std r9,24(3)
+91: std r10,32(3)
+9: ld r20,-120(1)
+ ld r21,-112(1)
+ ld r22,-104(1)
+ ld r23,-96(1)
+ ld r24,-88(1)
+ ld r25,-80(1)
+ ld r26,-72(1)
+ ld r27,-64(1)
+ ld r28,-56(1)
+ ld r29,-48(1)
+ ld r30,-40(1)
+ ld r31,-32(1)
+ li r3,0
+ blr
+
+/*
+ * on an exception, reset to the beginning and jump back into the
+ * standard __copy_tofrom_user
+ */
+100: ld r20,-120(1)
+ ld r21,-112(1)
+ ld r22,-104(1)
+ ld r23,-96(1)
+ ld r24,-88(1)
+ ld r25,-80(1)
+ ld r26,-72(1)
+ ld r27,-64(1)
+ ld r28,-56(1)
+ ld r29,-48(1)
+ ld r30,-40(1)
+ ld r31,-32(1)
+ ld r3,-24(r1)
+ ld r4,-16(r1)
+ li r5,4096
+ b .Ldst_aligned
+
+ .section __ex_table,"a"
+ .align 3
+ .llong 20b,100b
+ .llong 21b,100b
+ .llong 22b,100b
+ .llong 23b,100b
+ .llong 24b,100b
+ .llong 25b,100b
+ .llong 26b,100b
+ .llong 27b,100b
+ .llong 28b,100b
+ .llong 29b,100b
+ .llong 30b,100b
+ .llong 31b,100b
+ .llong 32b,100b
+ .llong 33b,100b
+ .llong 34b,100b
+ .llong 35b,100b
+ .llong 36b,100b
+ .llong 37b,100b
+ .llong 38b,100b
+ .llong 39b,100b
+ .llong 40b,100b
+ .llong 41b,100b
+ .llong 42b,100b
+ .llong 43b,100b
+ .llong 44b,100b
+ .llong 45b,100b
+ .llong 46b,100b
+ .llong 47b,100b
+ .llong 48b,100b
+ .llong 49b,100b
+ .llong 50b,100b
+ .llong 51b,100b
+ .llong 52b,100b
+ .llong 53b,100b
+ .llong 54b,100b
+ .llong 55b,100b
+ .llong 56b,100b
+ .llong 57b,100b
+ .llong 58b,100b
+ .llong 59b,100b
+ .llong 60b,100b
+ .llong 61b,100b
+ .llong 62b,100b
+ .llong 63b,100b
+ .llong 64b,100b
+ .llong 65b,100b
+ .llong 66b,100b
+ .llong 67b,100b
+ .llong 68b,100b
+ .llong 69b,100b
+ .llong 70b,100b
+ .llong 71b,100b
+ .llong 72b,100b
+ .llong 73b,100b
+ .llong 74b,100b
+ .llong 75b,100b
+ .llong 76b,100b
+ .llong 77b,100b
+ .llong 78b,100b
+ .llong 79b,100b
+ .llong 80b,100b
+ .llong 81b,100b
+ .llong 82b,100b
+ .llong 83b,100b
+ .llong 84b,100b
+ .llong 85b,100b
+ .llong 86b,100b
+ .llong 87b,100b
+ .llong 88b,100b
+ .llong 89b,100b
+ .llong 90b,100b
+ .llong 91b,100b
diff --git a/arch/powerpc/lib/div64.S b/arch/powerpc/lib/div64.S
new file mode 100644
index 0000000..3527569
--- /dev/null
+++ b/arch/powerpc/lib/div64.S
@@ -0,0 +1,58 @@
+/*
+ * Divide a 64-bit unsigned number by a 32-bit unsigned number.
+ * This routine assumes that the top 32 bits of the dividend are
+ * non-zero to start with.
+ * On entry, r3 points to the dividend, which get overwritten with
+ * the 64-bit quotient, and r4 contains the divisor.
+ * On exit, r3 contains the remainder.
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/ppc_asm.h>
+#include <asm/processor.h>
+
+_GLOBAL(__div64_32)
+ lwz r5,0(r3) # get the dividend into r5/r6
+ lwz r6,4(r3)
+ cmplw r5,r4
+ li r7,0
+ li r8,0
+ blt 1f
+ divwu r7,r5,r4 # if dividend.hi >= divisor,
+ mullw r0,r7,r4 # quotient.hi = dividend.hi / divisor
+ subf. r5,r0,r5 # dividend.hi %= divisor
+ beq 3f
+1: mr r11,r5 # here dividend.hi != 0
+ andis. r0,r5,0xc000
+ bne 2f
+ cntlzw r0,r5 # we are shifting the dividend right
+ li r10,-1 # to make it < 2^32, and shifting
+ srw r10,r10,r0 # the divisor right the same amount,
+ add r9,r4,r10 # rounding up (so the estimate cannot
+ andc r11,r6,r10 # ever be too large, only too small)
+ andc r9,r9,r10
+ or r11,r5,r11
+ rotlw r9,r9,r0
+ rotlw r11,r11,r0
+ divwu r11,r11,r9 # then we divide the shifted quantities
+2: mullw r10,r11,r4 # to get an estimate of the quotient,
+ mulhwu r9,r11,r4 # multiply the estimate by the divisor,
+ subfc r6,r10,r6 # take the product from the divisor,
+ add r8,r8,r11 # and add the estimate to the accumulated
+ subfe. r5,r9,r5 # quotient
+ bne 1b
+3: cmplw r6,r4
+ blt 4f
+ divwu r0,r6,r4 # perform the remaining 32-bit division
+ mullw r10,r0,r4 # and get the remainder
+ add r8,r8,r0
+ subf r6,r10,r6
+4: stw r7,0(r3) # return the quotient in *r3
+ stw r8,4(r3)
+ mr r3,r6 # return the remainder in r3
+ blr
diff --git a/arch/powerpc/lib/e2a.c b/arch/powerpc/lib/e2a.c
new file mode 100644
index 0000000..d2b8348
--- /dev/null
+++ b/arch/powerpc/lib/e2a.c
@@ -0,0 +1,108 @@
+/*
+ * arch/ppc64/lib/e2a.c
+ *
+ * EBCDIC to ASCII conversion
+ *
+ * This function moved here from arch/ppc64/kernel/viopath.c
+ *
+ * (C) Copyright 2000-2004 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) anyu later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/module.h>
+
+unsigned char e2a(unsigned char x)
+{
+ switch (x) {
+ case 0xF0:
+ return '0';
+ case 0xF1:
+ return '1';
+ case 0xF2:
+ return '2';
+ case 0xF3:
+ return '3';
+ case 0xF4:
+ return '4';
+ case 0xF5:
+ return '5';
+ case 0xF6:
+ return '6';
+ case 0xF7:
+ return '7';
+ case 0xF8:
+ return '8';
+ case 0xF9:
+ return '9';
+ case 0xC1:
+ return 'A';
+ case 0xC2:
+ return 'B';
+ case 0xC3:
+ return 'C';
+ case 0xC4:
+ return 'D';
+ case 0xC5:
+ return 'E';
+ case 0xC6:
+ return 'F';
+ case 0xC7:
+ return 'G';
+ case 0xC8:
+ return 'H';
+ case 0xC9:
+ return 'I';
+ case 0xD1:
+ return 'J';
+ case 0xD2:
+ return 'K';
+ case 0xD3:
+ return 'L';
+ case 0xD4:
+ return 'M';
+ case 0xD5:
+ return 'N';
+ case 0xD6:
+ return 'O';
+ case 0xD7:
+ return 'P';
+ case 0xD8:
+ return 'Q';
+ case 0xD9:
+ return 'R';
+ case 0xE2:
+ return 'S';
+ case 0xE3:
+ return 'T';
+ case 0xE4:
+ return 'U';
+ case 0xE5:
+ return 'V';
+ case 0xE6:
+ return 'W';
+ case 0xE7:
+ return 'X';
+ case 0xE8:
+ return 'Y';
+ case 0xE9:
+ return 'Z';
+ }
+ return ' ';
+}
+EXPORT_SYMBOL(e2a);
+
+
diff --git a/arch/powerpc/lib/memcpy.S b/arch/powerpc/lib/memcpy.S
new file mode 100644
index 0000000..9ccacdf
--- /dev/null
+++ b/arch/powerpc/lib/memcpy.S
@@ -0,0 +1,172 @@
+/*
+ * arch/ppc64/lib/memcpy.S
+ *
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+
+ .align 7
+_GLOBAL(memcpy)
+ mtcrf 0x01,r5
+ cmpldi cr1,r5,16
+ neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
+ andi. r6,r6,7
+ dcbt 0,r4
+ blt cr1,.Lshort_copy
+ bne .Ldst_unaligned
+.Ldst_aligned:
+ andi. r0,r4,7
+ addi r3,r3,-16
+ bne .Lsrc_unaligned
+ srdi r7,r5,4
+ ld r9,0(r4)
+ addi r4,r4,-8
+ mtctr r7
+ andi. r5,r5,7
+ bf cr7*4+0,2f
+ addi r3,r3,8
+ addi r4,r4,8
+ mr r8,r9
+ blt cr1,3f
+1: ld r9,8(r4)
+ std r8,8(r3)
+2: ldu r8,16(r4)
+ stdu r9,16(r3)
+ bdnz 1b
+3: std r8,8(r3)
+ beqlr
+ addi r3,r3,16
+ ld r9,8(r4)
+.Ldo_tail:
+ bf cr7*4+1,1f
+ rotldi r9,r9,32
+ stw r9,0(r3)
+ addi r3,r3,4
+1: bf cr7*4+2,2f
+ rotldi r9,r9,16
+ sth r9,0(r3)
+ addi r3,r3,2
+2: bf cr7*4+3,3f
+ rotldi r9,r9,8
+ stb r9,0(r3)
+3: blr
+
+.Lsrc_unaligned:
+ srdi r6,r5,3
+ addi r5,r5,-16
+ subf r4,r0,r4
+ srdi r7,r5,4
+ sldi r10,r0,3
+ cmpdi cr6,r6,3
+ andi. r5,r5,7
+ mtctr r7
+ subfic r11,r10,64
+ add r5,r5,r0
+
+ bt cr7*4+0,0f
+
+ ld r9,0(r4) # 3+2n loads, 2+2n stores
+ ld r0,8(r4)
+ sld r6,r9,r10
+ ldu r9,16(r4)
+ srd r7,r0,r11
+ sld r8,r0,r10
+ or r7,r7,r6
+ blt cr6,4f
+ ld r0,8(r4)
+ # s1<< in r8, d0=(s0<<|s1>>) in r7, s3 in r0, s2 in r9, nix in r6 & r12
+ b 2f
+
+0: ld r0,0(r4) # 4+2n loads, 3+2n stores
+ ldu r9,8(r4)
+ sld r8,r0,r10
+ addi r3,r3,-8
+ blt cr6,5f
+ ld r0,8(r4)
+ srd r12,r9,r11
+ sld r6,r9,r10
+ ldu r9,16(r4)
+ or r12,r8,r12
+ srd r7,r0,r11
+ sld r8,r0,r10
+ addi r3,r3,16
+ beq cr6,3f
+
+ # d0=(s0<<|s1>>) in r12, s1<< in r6, s2>> in r7, s2<< in r8, s3 in r9
+1: or r7,r7,r6
+ ld r0,8(r4)
+ std r12,8(r3)
+2: srd r12,r9,r11
+ sld r6,r9,r10
+ ldu r9,16(r4)
+ or r12,r8,r12
+ stdu r7,16(r3)
+ srd r7,r0,r11
+ sld r8,r0,r10
+ bdnz 1b
+
+3: std r12,8(r3)
+ or r7,r7,r6
+4: std r7,16(r3)
+5: srd r12,r9,r11
+ or r12,r8,r12
+ std r12,24(r3)
+ beqlr
+ cmpwi cr1,r5,8
+ addi r3,r3,32
+ sld r9,r9,r10
+ ble cr1,.Ldo_tail
+ ld r0,8(r4)
+ srd r7,r0,r11
+ or r9,r7,r9
+ b .Ldo_tail
+
+.Ldst_unaligned:
+ mtcrf 0x01,r6 # put #bytes to 8B bdry into cr7
+ subf r5,r6,r5
+ li r7,0
+ cmpldi r1,r5,16
+ bf cr7*4+3,1f
+ lbz r0,0(r4)
+ stb r0,0(r3)
+ addi r7,r7,1
+1: bf cr7*4+2,2f
+ lhzx r0,r7,r4
+ sthx r0,r7,r3
+ addi r7,r7,2
+2: bf cr7*4+1,3f
+ lwzx r0,r7,r4
+ stwx r0,r7,r3
+3: mtcrf 0x01,r5
+ add r4,r6,r4
+ add r3,r6,r3
+ b .Ldst_aligned
+
+.Lshort_copy:
+ bf cr7*4+0,1f
+ lwz r0,0(r4)
+ lwz r9,4(r4)
+ addi r4,r4,8
+ stw r0,0(r3)
+ stw r9,4(r3)
+ addi r3,r3,8
+1: bf cr7*4+1,2f
+ lwz r0,0(r4)
+ addi r4,r4,4
+ stw r0,0(r3)
+ addi r3,r3,4
+2: bf cr7*4+2,3f
+ lhz r0,0(r4)
+ addi r4,r4,2
+ sth r0,0(r3)
+ addi r3,r3,2
+3: bf cr7*4+3,4f
+ lbz r0,0(r4)
+ stb r0,0(r3)
+4: blr
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
new file mode 100644
index 0000000..42c5de2
--- /dev/null
+++ b/arch/powerpc/lib/rheap.c
@@ -0,0 +1,693 @@
+/*
+ * arch/ppc/syslib/rheap.c
+ *
+ * A Remote Heap. Remote means that we don't touch the memory that the
+ * heap points to. Normal heap implementations use the memory they manage
+ * to place their list. We cannot do that because the memory we manage may
+ * have special properties, for example it is uncachable or of different
+ * endianess.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+
+#include <asm/rheap.h>
+
+/*
+ * Fixup a list_head, needed when copying lists. If the pointers fall
+ * between s and e, apply the delta. This assumes that
+ * sizeof(struct list_head *) == sizeof(unsigned long *).
+ */
+static inline void fixup(unsigned long s, unsigned long e, int d,
+ struct list_head *l)
+{
+ unsigned long *pp;
+
+ pp = (unsigned long *)&l->next;
+ if (*pp >= s && *pp < e)
+ *pp += d;
+
+ pp = (unsigned long *)&l->prev;
+ if (*pp >= s && *pp < e)
+ *pp += d;
+}
+
+/* Grow the allocated blocks */
+static int grow(rh_info_t * info, int max_blocks)
+{
+ rh_block_t *block, *blk;
+ int i, new_blocks;
+ int delta;
+ unsigned long blks, blke;
+
+ if (max_blocks <= info->max_blocks)
+ return -EINVAL;
+
+ new_blocks = max_blocks - info->max_blocks;
+
+ block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
+ if (block == NULL)
+ return -ENOMEM;
+
+ if (info->max_blocks > 0) {
+
+ /* copy old block area */
+ memcpy(block, info->block,
+ sizeof(rh_block_t) * info->max_blocks);
+
+ delta = (char *)block - (char *)info->block;
+
+ /* and fixup list pointers */
+ blks = (unsigned long)info->block;
+ blke = (unsigned long)(info->block + info->max_blocks);
+
+ for (i = 0, blk = block; i < info->max_blocks; i++, blk++)
+ fixup(blks, blke, delta, &blk->list);
+
+ fixup(blks, blke, delta, &info->empty_list);
+ fixup(blks, blke, delta, &info->free_list);
+ fixup(blks, blke, delta, &info->taken_list);
+
+ /* free the old allocated memory */
+ if ((info->flags & RHIF_STATIC_BLOCK) == 0)
+ kfree(info->block);
+ }
+
+ info->block = block;
+ info->empty_slots += new_blocks;
+ info->max_blocks = max_blocks;
+ info->flags &= ~RHIF_STATIC_BLOCK;
+
+ /* add all new blocks to the free list */
+ for (i = 0, blk = block + info->max_blocks; i < new_blocks; i++, blk++)
+ list_add(&blk->list, &info->empty_list);
+
+ return 0;
+}
+
+/*
+ * Assure at least the required amount of empty slots. If this function
+ * causes a grow in the block area then all pointers kept to the block
+ * area are invalid!
+ */
+static int assure_empty(rh_info_t * info, int slots)
+{
+ int max_blocks;
+
+ /* This function is not meant to be used to grow uncontrollably */
+ if (slots >= 4)
+ return -EINVAL;
+
+ /* Enough space */
+ if (info->empty_slots >= slots)
+ return 0;
+
+ /* Next 16 sized block */
+ max_blocks = ((info->max_blocks + slots) + 15) & ~15;
+
+ return grow(info, max_blocks);
+}
+
+static rh_block_t *get_slot(rh_info_t * info)
+{
+ rh_block_t *blk;
+
+ /* If no more free slots, and failure to extend. */
+ /* XXX: You should have called assure_empty before */
+ if (info->empty_slots == 0) {
+ printk(KERN_ERR "rh: out of slots; crash is imminent.\n");
+ return NULL;
+ }
+
+ /* Get empty slot to use */
+ blk = list_entry(info->empty_list.next, rh_block_t, list);
+ list_del_init(&blk->list);
+ info->empty_slots--;
+
+ /* Initialize */
+ blk->start = NULL;
+ blk->size = 0;
+ blk->owner = NULL;
+
+ return blk;
+}
+
+static inline void release_slot(rh_info_t * info, rh_block_t * blk)
+{
+ list_add(&blk->list, &info->empty_list);
+ info->empty_slots++;
+}
+
+static void attach_free_block(rh_info_t * info, rh_block_t * blkn)
+{
+ rh_block_t *blk;
+ rh_block_t *before;
+ rh_block_t *after;
+ rh_block_t *next;
+ int size;
+ unsigned long s, e, bs, be;
+ struct list_head *l;
+
+ /* We assume that they are aligned properly */
+ size = blkn->size;
+ s = (unsigned long)blkn->start;
+ e = s + size;
+
+ /* Find the blocks immediately before and after the given one
+ * (if any) */
+ before = NULL;
+ after = NULL;
+ next = NULL;
+
+ list_for_each(l, &info->free_list) {
+ blk = list_entry(l, rh_block_t, list);
+
+ bs = (unsigned long)blk->start;
+ be = bs + blk->size;
+
+ if (next == NULL && s >= bs)
+ next = blk;
+
+ if (be == s)
+ before = blk;
+
+ if (e == bs)
+ after = blk;
+
+ /* If both are not null, break now */
+ if (before != NULL && after != NULL)
+ break;
+ }
+
+ /* Now check if they are really adjacent */
+ if (before != NULL && s != (unsigned long)before->start + before->size)
+ before = NULL;
+
+ if (after != NULL && e != (unsigned long)after->start)
+ after = NULL;
+
+ /* No coalescing; list insert and return */
+ if (before == NULL && after == NULL) {
+
+ if (next != NULL)
+ list_add(&blkn->list, &next->list);
+ else
+ list_add(&blkn->list, &info->free_list);
+
+ return;
+ }
+
+ /* We don't need it anymore */
+ release_slot(info, blkn);
+
+ /* Grow the before block */
+ if (before != NULL && after == NULL) {
+ before->size += size;
+ return;
+ }
+
+ /* Grow the after block backwards */
+ if (before == NULL && after != NULL) {
+ after->start = (int8_t *)after->start - size;
+ after->size += size;
+ return;
+ }
+
+ /* Grow the before block, and release the after block */
+ before->size += size + after->size;
+ list_del(&after->list);
+ release_slot(info, after);
+}
+
+static void attach_taken_block(rh_info_t * info, rh_block_t * blkn)
+{
+ rh_block_t *blk;
+ struct list_head *l;
+
+ /* Find the block immediately before the given one (if any) */
+ list_for_each(l, &info->taken_list) {
+ blk = list_entry(l, rh_block_t, list);
+ if (blk->start > blkn->start) {
+ list_add_tail(&blkn->list, &blk->list);
+ return;
+ }
+ }
+
+ list_add_tail(&blkn->list, &info->taken_list);
+}
+
+/*
+ * Create a remote heap dynamically. Note that no memory for the blocks
+ * are allocated. It will upon the first allocation
+ */
+rh_info_t *rh_create(unsigned int alignment)
+{
+ rh_info_t *info;
+
+ /* Alignment must be a power of two */
+ if ((alignment & (alignment - 1)) != 0)
+ return ERR_PTR(-EINVAL);
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (info == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ info->alignment = alignment;
+
+ /* Initially everything as empty */
+ info->block = NULL;
+ info->max_blocks = 0;
+ info->empty_slots = 0;
+ info->flags = 0;
+
+ INIT_LIST_HEAD(&info->empty_list);
+ INIT_LIST_HEAD(&info->free_list);
+ INIT_LIST_HEAD(&info->taken_list);
+
+ return info;
+}
+
+/*
+ * Destroy a dynamically created remote heap. Deallocate only if the areas
+ * are not static
+ */
+void rh_destroy(rh_info_t * info)
+{
+ if ((info->flags & RHIF_STATIC_BLOCK) == 0 && info->block != NULL)
+ kfree(info->block);
+
+ if ((info->flags & RHIF_STATIC_INFO) == 0)
+ kfree(info);
+}
+
+/*
+ * Initialize in place a remote heap info block. This is needed to support
+ * operation very early in the startup of the kernel, when it is not yet safe
+ * to call kmalloc.
+ */
+void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+ rh_block_t * block)
+{
+ int i;
+ rh_block_t *blk;
+
+ /* Alignment must be a power of two */
+ if ((alignment & (alignment - 1)) != 0)
+ return;
+
+ info->alignment = alignment;
+
+ /* Initially everything as empty */
+ info->block = block;
+ info->max_blocks = max_blocks;
+ info->empty_slots = max_blocks;
+ info->flags = RHIF_STATIC_INFO | RHIF_STATIC_BLOCK;
+
+ INIT_LIST_HEAD(&info->empty_list);
+ INIT_LIST_HEAD(&info->free_list);
+ INIT_LIST_HEAD(&info->taken_list);
+
+ /* Add all new blocks to the free list */
+ for (i = 0, blk = block; i < max_blocks; i++, blk++)
+ list_add(&blk->list, &info->empty_list);
+}
+
+/* Attach a free memory region, coalesces regions if adjuscent */
+int rh_attach_region(rh_info_t * info, void *start, int size)
+{
+ rh_block_t *blk;
+ unsigned long s, e, m;
+ int r;
+
+ /* The region must be aligned */
+ s = (unsigned long)start;
+ e = s + size;
+ m = info->alignment - 1;
+
+ /* Round start up */
+ s = (s + m) & ~m;
+
+ /* Round end down */
+ e = e & ~m;
+
+ /* Take final values */
+ start = (void *)s;
+ size = (int)(e - s);
+
+ /* Grow the blocks, if needed */
+ r = assure_empty(info, 1);
+ if (r < 0)
+ return r;
+
+ blk = get_slot(info);
+ blk->start = start;
+ blk->size = size;
+ blk->owner = NULL;
+
+ attach_free_block(info, blk);
+
+ return 0;
+}
+
+/* Detatch given address range, splits free block if needed. */
+void *rh_detach_region(rh_info_t * info, void *start, int size)
+{
+ struct list_head *l;
+ rh_block_t *blk, *newblk;
+ unsigned long s, e, m, bs, be;
+
+ /* Validate size */
+ if (size <= 0)
+ return ERR_PTR(-EINVAL);
+
+ /* The region must be aligned */
+ s = (unsigned long)start;
+ e = s + size;
+ m = info->alignment - 1;
+
+ /* Round start up */
+ s = (s + m) & ~m;
+
+ /* Round end down */
+ e = e & ~m;
+
+ if (assure_empty(info, 1) < 0)
+ return ERR_PTR(-ENOMEM);
+
+ blk = NULL;
+ list_for_each(l, &info->free_list) {
+ blk = list_entry(l, rh_block_t, list);
+ /* The range must lie entirely inside one free block */
+ bs = (unsigned long)blk->start;
+ be = (unsigned long)blk->start + blk->size;
+ if (s >= bs && e <= be)
+ break;
+ blk = NULL;
+ }
+
+ if (blk == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ /* Perfect fit */
+ if (bs == s && be == e) {
+ /* Delete from free list, release slot */
+ list_del(&blk->list);
+ release_slot(info, blk);
+ return (void *)s;
+ }
+
+ /* blk still in free list, with updated start and/or size */
+ if (bs == s || be == e) {
+ if (bs == s)
+ blk->start = (int8_t *)blk->start + size;
+ blk->size -= size;
+
+ } else {
+ /* The front free fragment */
+ blk->size = s - bs;
+
+ /* the back free fragment */
+ newblk = get_slot(info);
+ newblk->start = (void *)e;
+ newblk->size = be - e;
+
+ list_add(&newblk->list, &blk->list);
+ }
+
+ return (void *)s;
+}
+
+void *rh_alloc(rh_info_t * info, int size, const char *owner)
+{
+ struct list_head *l;
+ rh_block_t *blk;
+ rh_block_t *newblk;
+ void *start;
+
+ /* Validate size */
+ if (size <= 0)
+ return ERR_PTR(-EINVAL);
+
+ /* Align to configured alignment */
+ size = (size + (info->alignment - 1)) & ~(info->alignment - 1);
+
+ if (assure_empty(info, 1) < 0)
+ return ERR_PTR(-ENOMEM);
+
+ blk = NULL;
+ list_for_each(l, &info->free_list) {
+ blk = list_entry(l, rh_block_t, list);
+ if (size <= blk->size)
+ break;
+ blk = NULL;
+ }
+
+ if (blk == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ /* Just fits */
+ if (blk->size == size) {
+ /* Move from free list to taken list */
+ list_del(&blk->list);
+ blk->owner = owner;
+ start = blk->start;
+
+ attach_taken_block(info, blk);
+
+ return start;
+ }
+
+ newblk = get_slot(info);
+ newblk->start = blk->start;
+ newblk->size = size;
+ newblk->owner = owner;
+
+ /* blk still in free list, with updated start, size */
+ blk->start = (int8_t *)blk->start + size;
+ blk->size -= size;
+
+ start = newblk->start;
+
+ attach_taken_block(info, newblk);
+
+ return start;
+}
+
+/* allocate at precisely the given address */
+void *rh_alloc_fixed(rh_info_t * info, void *start, int size, const char *owner)
+{
+ struct list_head *l;
+ rh_block_t *blk, *newblk1, *newblk2;
+ unsigned long s, e, m, bs, be;
+
+ /* Validate size */
+ if (size <= 0)
+ return ERR_PTR(-EINVAL);
+
+ /* The region must be aligned */
+ s = (unsigned long)start;
+ e = s + size;
+ m = info->alignment - 1;
+
+ /* Round start up */
+ s = (s + m) & ~m;
+
+ /* Round end down */
+ e = e & ~m;
+
+ if (assure_empty(info, 2) < 0)
+ return ERR_PTR(-ENOMEM);
+
+ blk = NULL;
+ list_for_each(l, &info->free_list) {
+ blk = list_entry(l, rh_block_t, list);
+ /* The range must lie entirely inside one free block */
+ bs = (unsigned long)blk->start;
+ be = (unsigned long)blk->start + blk->size;
+ if (s >= bs && e <= be)
+ break;
+ }
+
+ if (blk == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ /* Perfect fit */
+ if (bs == s && be == e) {
+ /* Move from free list to taken list */
+ list_del(&blk->list);
+ blk->owner = owner;
+
+ start = blk->start;
+ attach_taken_block(info, blk);
+
+ return start;
+
+ }
+
+ /* blk still in free list, with updated start and/or size */
+ if (bs == s || be == e) {
+ if (bs == s)
+ blk->start = (int8_t *)blk->start + size;
+ blk->size -= size;
+
+ } else {
+ /* The front free fragment */
+ blk->size = s - bs;
+
+ /* The back free fragment */
+ newblk2 = get_slot(info);
+ newblk2->start = (void *)e;
+ newblk2->size = be - e;
+
+ list_add(&newblk2->list, &blk->list);
+ }
+
+ newblk1 = get_slot(info);
+ newblk1->start = (void *)s;
+ newblk1->size = e - s;
+ newblk1->owner = owner;
+
+ start = newblk1->start;
+ attach_taken_block(info, newblk1);
+
+ return start;
+}
+
+int rh_free(rh_info_t * info, void *start)
+{
+ rh_block_t *blk, *blk2;
+ struct list_head *l;
+ int size;
+
+ /* Linear search for block */
+ blk = NULL;
+ list_for_each(l, &info->taken_list) {
+ blk2 = list_entry(l, rh_block_t, list);
+ if (start < blk2->start)
+ break;
+ blk = blk2;
+ }
+
+ if (blk == NULL || start > (blk->start + blk->size))
+ return -EINVAL;
+
+ /* Remove from taken list */
+ list_del(&blk->list);
+
+ /* Get size of freed block */
+ size = blk->size;
+ attach_free_block(info, blk);
+
+ return size;
+}
+
+int rh_get_stats(rh_info_t * info, int what, int max_stats, rh_stats_t * stats)
+{
+ rh_block_t *blk;
+ struct list_head *l;
+ struct list_head *h;
+ int nr;
+
+ switch (what) {
+
+ case RHGS_FREE:
+ h = &info->free_list;
+ break;
+
+ case RHGS_TAKEN:
+ h = &info->taken_list;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Linear search for block */
+ nr = 0;
+ list_for_each(l, h) {
+ blk = list_entry(l, rh_block_t, list);
+ if (stats != NULL && nr < max_stats) {
+ stats->start = blk->start;
+ stats->size = blk->size;
+ stats->owner = blk->owner;
+ stats++;
+ }
+ nr++;
+ }
+
+ return nr;
+}
+
+int rh_set_owner(rh_info_t * info, void *start, const char *owner)
+{
+ rh_block_t *blk, *blk2;
+ struct list_head *l;
+ int size;
+
+ /* Linear search for block */
+ blk = NULL;
+ list_for_each(l, &info->taken_list) {
+ blk2 = list_entry(l, rh_block_t, list);
+ if (start < blk2->start)
+ break;
+ blk = blk2;
+ }
+
+ if (blk == NULL || start > (blk->start + blk->size))
+ return -EINVAL;
+
+ blk->owner = owner;
+ size = blk->size;
+
+ return size;
+}
+
+void rh_dump(rh_info_t * info)
+{
+ static rh_stats_t st[32]; /* XXX maximum 32 blocks */
+ int maxnr;
+ int i, nr;
+
+ maxnr = sizeof(st) / sizeof(st[0]);
+
+ printk(KERN_INFO
+ "info @0x%p (%d slots empty / %d max)\n",
+ info, info->empty_slots, info->max_blocks);
+
+ printk(KERN_INFO " Free:\n");
+ nr = rh_get_stats(info, RHGS_FREE, maxnr, st);
+ if (nr > maxnr)
+ nr = maxnr;
+ for (i = 0; i < nr; i++)
+ printk(KERN_INFO
+ " 0x%p-0x%p (%u)\n",
+ st[i].start, (int8_t *) st[i].start + st[i].size,
+ st[i].size);
+ printk(KERN_INFO "\n");
+
+ printk(KERN_INFO " Taken:\n");
+ nr = rh_get_stats(info, RHGS_TAKEN, maxnr, st);
+ if (nr > maxnr)
+ nr = maxnr;
+ for (i = 0; i < nr; i++)
+ printk(KERN_INFO
+ " 0x%p-0x%p (%u) %s\n",
+ st[i].start, (int8_t *) st[i].start + st[i].size,
+ st[i].size, st[i].owner != NULL ? st[i].owner : "");
+ printk(KERN_INFO "\n");
+}
+
+void rh_dump_blk(rh_info_t * info, rh_block_t * blk)
+{
+ printk(KERN_INFO
+ "blk @0x%p: 0x%p-0x%p (%u)\n",
+ blk, blk->start, (int8_t *) blk->start + blk->size, blk->size);
+}
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
new file mode 100644
index 0000000..e79123d
--- /dev/null
+++ b/arch/powerpc/lib/sstep.c
@@ -0,0 +1,141 @@
+/*
+ * Single-step support.
+ *
+ * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <asm/sstep.h>
+#include <asm/processor.h>
+
+extern char system_call_common[];
+
+/* Bits in SRR1 that are copied from MSR */
+#define MSR_MASK 0xffffffff87c0ffff
+
+/*
+ * Determine whether a conditional branch instruction would branch.
+ */
+static int branch_taken(unsigned int instr, struct pt_regs *regs)
+{
+ unsigned int bo = (instr >> 21) & 0x1f;
+ unsigned int bi;
+
+ if ((bo & 4) == 0) {
+ /* decrement counter */
+ --regs->ctr;
+ if (((bo >> 1) & 1) ^ (regs->ctr == 0))
+ return 0;
+ }
+ if ((bo & 0x10) == 0) {
+ /* check bit from CR */
+ bi = (instr >> 16) & 0x1f;
+ if (((regs->ccr >> (31 - bi)) & 1) != ((bo >> 3) & 1))
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Emulate instructions that cause a transfer of control.
+ * Returns 1 if the step was emulated, 0 if not,
+ * or -1 if the instruction is one that should not be stepped,
+ * such as an rfid, or a mtmsrd that would clear MSR_RI.
+ */
+int emulate_step(struct pt_regs *regs, unsigned int instr)
+{
+ unsigned int opcode, rd;
+ unsigned long int imm;
+
+ opcode = instr >> 26;
+ switch (opcode) {
+ case 16: /* bc */
+ imm = (signed short)(instr & 0xfffc);
+ if ((instr & 2) == 0)
+ imm += regs->nip;
+ regs->nip += 4;
+ if ((regs->msr & MSR_SF) == 0)
+ regs->nip &= 0xffffffffUL;
+ if (instr & 1)
+ regs->link = regs->nip;
+ if (branch_taken(instr, regs))
+ regs->nip = imm;
+ return 1;
+ case 17: /* sc */
+ /*
+ * N.B. this uses knowledge about how the syscall
+ * entry code works. If that is changed, this will
+ * need to be changed also.
+ */
+ regs->gpr[9] = regs->gpr[13];
+ regs->gpr[11] = regs->nip + 4;
+ regs->gpr[12] = regs->msr & MSR_MASK;
+ regs->gpr[13] = (unsigned long) get_paca();
+ regs->nip = (unsigned long) &system_call_common;
+ regs->msr = MSR_KERNEL;
+ return 1;
+ case 18: /* b */
+ imm = instr & 0x03fffffc;
+ if (imm & 0x02000000)
+ imm -= 0x04000000;
+ if ((instr & 2) == 0)
+ imm += regs->nip;
+ if (instr & 1) {
+ regs->link = regs->nip + 4;
+ if ((regs->msr & MSR_SF) == 0)
+ regs->link &= 0xffffffffUL;
+ }
+ if ((regs->msr & MSR_SF) == 0)
+ imm &= 0xffffffffUL;
+ regs->nip = imm;
+ return 1;
+ case 19:
+ switch (instr & 0x7fe) {
+ case 0x20: /* bclr */
+ case 0x420: /* bcctr */
+ imm = (instr & 0x400)? regs->ctr: regs->link;
+ regs->nip += 4;
+ if ((regs->msr & MSR_SF) == 0) {
+ regs->nip &= 0xffffffffUL;
+ imm &= 0xffffffffUL;
+ }
+ if (instr & 1)
+ regs->link = regs->nip;
+ if (branch_taken(instr, regs))
+ regs->nip = imm;
+ return 1;
+ case 0x24: /* rfid, scary */
+ return -1;
+ }
+ case 31:
+ rd = (instr >> 21) & 0x1f;
+ switch (instr & 0x7fe) {
+ case 0xa6: /* mfmsr */
+ regs->gpr[rd] = regs->msr & MSR_MASK;
+ regs->nip += 4;
+ if ((regs->msr & MSR_SF) == 0)
+ regs->nip &= 0xffffffffUL;
+ return 1;
+ case 0x164: /* mtmsrd */
+ /* only MSR_EE and MSR_RI get changed if bit 15 set */
+ /* mtmsrd doesn't change MSR_HV and MSR_ME */
+ imm = (instr & 0x10000)? 0x8002: 0xefffffffffffefffUL;
+ imm = (regs->msr & MSR_MASK & ~imm)
+ | (regs->gpr[rd] & imm);
+ if ((imm & MSR_RI) == 0)
+ /* can't step mtmsrd that would clear MSR_RI */
+ return -1;
+ regs->msr = imm;
+ regs->nip += 4;
+ if ((imm & MSR_SF) == 0)
+ regs->nip &= 0xffffffffUL;
+ return 1;
+ }
+ }
+ return 0;
+}
diff --git a/arch/powerpc/lib/strcase.c b/arch/powerpc/lib/strcase.c
new file mode 100644
index 0000000..36b5210
--- /dev/null
+++ b/arch/powerpc/lib/strcase.c
@@ -0,0 +1,23 @@
+#include <linux/ctype.h>
+
+int strcasecmp(const char *s1, const char *s2)
+{
+ int c1, c2;
+
+ do {
+ c1 = tolower(*s1++);
+ c2 = tolower(*s2++);
+ } while (c1 == c2 && c1 != 0);
+ return c1 - c2;
+}
+
+int strncasecmp(const char *s1, const char *s2, int n)
+{
+ int c1, c2;
+
+ do {
+ c1 = tolower(*s1++);
+ c2 = tolower(*s2++);
+ } while ((--n > 0) && c1 == c2 && c1 != 0);
+ return c1 - c2;
+}
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
new file mode 100644
index 0000000..15d40e9e
--- /dev/null
+++ b/arch/powerpc/lib/string.S
@@ -0,0 +1,203 @@
+/*
+ * String handling functions for PowerPC.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/errno.h>
+#include <asm/ppc_asm.h>
+
+ .text
+ .stabs "arch/powerpc/lib/",N_SO,0,0,0f
+ .stabs "string.S",N_SO,0,0,0f
+0:
+
+ .section __ex_table,"a"
+#ifdef CONFIG_PPC64
+ .align 3
+#define EXTBL .llong
+#else
+ .align 2
+#define EXTBL .long
+#endif
+ .text
+
+_GLOBAL(strcpy)
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r5)
+ bne 1b
+ blr
+
+/* This clears out any unused part of the destination buffer,
+ just as the libc version does. -- paulus */
+_GLOBAL(strncpy)
+ cmpwi 0,r5,0
+ beqlr
+ mtctr r5
+ addi r6,r3,-1
+ addi r4,r4,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r6)
+ bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */
+ bnelr /* if we didn't hit a null char, we're done */
+ mfctr r5
+ cmpwi 0,r5,0 /* any space left in destination buffer? */
+ beqlr /* we know r0 == 0 here */
+2: stbu r0,1(r6) /* clear it out if so */
+ bdnz 2b
+ blr
+
+_GLOBAL(strcat)
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r0,1(r5)
+ cmpwi 0,r0,0
+ bne 1b
+ addi r5,r5,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r5)
+ bne 1b
+ blr
+
+_GLOBAL(strcmp)
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r5)
+ cmpwi 1,r3,0
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ beqlr 1
+ beq 1b
+ blr
+
+_GLOBAL(strlen)
+ addi r4,r3,-1
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ bne 1b
+ subf r3,r3,r4
+ blr
+
+_GLOBAL(memcmp)
+ cmpwi 0,r5,0
+ ble- 2f
+ mtctr r5
+ addi r6,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r6)
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ bdnzt 2,1b
+ blr
+2: li r3,0
+ blr
+
+_GLOBAL(memchr)
+ cmpwi 0,r5,0
+ ble- 2f
+ mtctr r5
+ addi r3,r3,-1
+1: lbzu r0,1(r3)
+ cmpw 0,r0,r4
+ bdnzf 2,1b
+ beqlr
+2: li r3,0
+ blr
+
+_GLOBAL(__clear_user)
+ addi r6,r3,-4
+ li r3,0
+ li r5,0
+ cmplwi 0,r4,4
+ blt 7f
+ /* clear a single word */
+11: stwu r5,4(r6)
+ beqlr
+ /* clear word sized chunks */
+ andi. r0,r6,3
+ add r4,r0,r4
+ subf r6,r0,r6
+ srwi r0,r4,2
+ andi. r4,r4,3
+ mtctr r0
+ bdz 7f
+1: stwu r5,4(r6)
+ bdnz 1b
+ /* clear byte sized chunks */
+7: cmpwi 0,r4,0
+ beqlr
+ mtctr r4
+ addi r6,r6,3
+8: stbu r5,1(r6)
+ bdnz 8b
+ blr
+90: mr r3,r4
+ blr
+91: mfctr r3
+ slwi r3,r3,2
+ add r3,r3,r4
+ blr
+92: mfctr r3
+ blr
+
+ .section __ex_table,"a"
+ EXTBL 11b,90b
+ EXTBL 1b,91b
+ EXTBL 8b,92b
+ .text
+
+_GLOBAL(__strncpy_from_user)
+ addi r6,r3,-1
+ addi r4,r4,-1
+ cmpwi 0,r5,0
+ beq 2f
+ mtctr r5
+1: lbzu r0,1(r4)
+ cmpwi 0,r0,0
+ stbu r0,1(r6)
+ bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */
+ beq 3f
+2: addi r6,r6,1
+3: subf r3,r3,r6
+ blr
+99: li r3,-EFAULT
+ blr
+
+ .section __ex_table,"a"
+ EXTBL 1b,99b
+ .text
+
+/* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
+_GLOBAL(__strnlen_user)
+ addi r7,r3,-1
+ subf r6,r7,r5 /* top+1 - str */
+ cmplw 0,r4,r6
+ bge 0f
+ mr r6,r4
+0: mtctr r6 /* ctr = min(len, top - str) */
+1: lbzu r0,1(r7) /* get next byte */
+ cmpwi 0,r0,0
+ bdnzf 2,1b /* loop if --ctr != 0 && byte != 0 */
+ addi r7,r7,1
+ subf r3,r3,r7 /* number of bytes we have looked at */
+ beqlr /* return if we found a 0 byte */
+ cmpw 0,r3,r4 /* did we look at all len bytes? */
+ blt 99f /* if not, must have hit top */
+ addi r3,r4,1 /* return len + 1 to indicate no null found */
+ blr
+99: li r3,0 /* bad address, return 0 */
+ blr
+
+ .section __ex_table,"a"
+ EXTBL 1b,99b
diff --git a/arch/powerpc/lib/usercopy.c b/arch/powerpc/lib/usercopy.c
new file mode 100644
index 0000000..5eea6f3
--- /dev/null
+++ b/arch/powerpc/lib/usercopy.c
@@ -0,0 +1,41 @@
+/*
+ * Functions which are too large to be inlined.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <asm/uaccess.h>
+
+unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ if (likely(access_ok(VERIFY_READ, from, n)))
+ n = __copy_from_user(to, from, n);
+ else
+ memset(to, 0, n);
+ return n;
+}
+
+unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ if (likely(access_ok(VERIFY_WRITE, to, n)))
+ n = __copy_to_user(to, from, n);
+ return n;
+}
+
+unsigned long copy_in_user(void __user *to, const void __user *from,
+ unsigned long n)
+{
+ might_sleep();
+ if (likely(access_ok(VERIFY_READ, from, n) &&
+ access_ok(VERIFY_WRITE, to, n)))
+ n =__copy_tofrom_user(to, from, n);
+ return n;
+}
+
+EXPORT_SYMBOL(copy_from_user);
+EXPORT_SYMBOL(copy_to_user);
+EXPORT_SYMBOL(copy_in_user);
+
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
new file mode 100644
index 0000000..3d79ce2
--- /dev/null
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -0,0 +1,120 @@
+/*
+ * Modifications by Matt Porter (mporter@mvista.com) to support
+ * PPC44x Book E processors.
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+
+#include "mmu_decl.h"
+
+extern char etext[], _stext[];
+
+/* Used by the 44x TLB replacement exception handler.
+ * Just needed it declared someplace.
+ */
+unsigned int tlb_44x_index = 0;
+unsigned int tlb_44x_hwater = 62;
+
+/*
+ * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
+ */
+static void __init
+ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys)
+{
+ unsigned long attrib = 0;
+
+ __asm__ __volatile__("\
+ clrrwi %2,%2,10\n\
+ ori %2,%2,%4\n\
+ clrrwi %1,%1,10\n\
+ li %0,0\n\
+ ori %0,%0,%5\n\
+ tlbwe %2,%3,%6\n\
+ tlbwe %1,%3,%7\n\
+ tlbwe %0,%3,%8"
+ :
+ : "r" (attrib), "r" (phys), "r" (virt), "r" (slot),
+ "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M),
+ "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
+ "i" (PPC44x_TLB_PAGEID),
+ "i" (PPC44x_TLB_XLAT),
+ "i" (PPC44x_TLB_ATTRIB));
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ flush_instruction_cache();
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+ unsigned int pinned_tlbs = 1;
+ int i;
+
+ /* Determine number of entries necessary to cover lowmem */
+ pinned_tlbs = (unsigned int)
+ (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT);
+
+ /* Write upper watermark to save location */
+ tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
+
+ /* If necessary, set additional pinned TLBs */
+ if (pinned_tlbs > 1)
+ for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
+ unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE;
+ ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
+ }
+
+ return total_lowmem;
+}
diff --git a/arch/powerpc/mm/4xx_mmu.c b/arch/powerpc/mm/4xx_mmu.c
new file mode 100644
index 0000000..b7bcbc2
--- /dev/null
+++ b/arch/powerpc/mm/4xx_mmu.c
@@ -0,0 +1,141 @@
+/*
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+#include "mmu_decl.h"
+
+extern int __map_without_ltlbs;
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ /*
+ * The Zone Protection Register (ZPR) defines how protection will
+ * be applied to every page which is a member of a given zone. At
+ * present, we utilize only two of the 4xx's zones.
+ * The zone index bits (of ZSEL) in the PTE are used for software
+ * indicators, except the LSB. For user access, zone 1 is used,
+ * for kernel access, zone 0 is used. We set all but zone 1
+ * to zero, allowing only kernel access as indicated in the PTE.
+ * For zone 1, we set a 01 binary (a value of 10 will not work)
+ * to allow user access as indicated in the PTE. This also allows
+ * kernel access as indicated in the PTE.
+ */
+
+ mtspr(SPRN_ZPR, 0x10000000);
+
+ flush_instruction_cache();
+
+ /*
+ * Set up the real-mode cache parameters for the exception vector
+ * handlers (which are run in real-mode).
+ */
+
+ mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
+
+ /*
+ * Cache instruction and data space where the exception
+ * vectors and the kernel live in real-mode.
+ */
+
+ mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */
+ mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */
+}
+
+#define LARGE_PAGE_SIZE_16M (1<<24)
+#define LARGE_PAGE_SIZE_4M (1<<22)
+
+unsigned long __init mmu_mapin_ram(void)
+{
+ unsigned long v, s;
+ phys_addr_t p;
+
+ v = KERNELBASE;
+ p = PPC_MEMSTART;
+ s = 0;
+
+ if (__map_without_ltlbs) {
+ return s;
+ }
+
+ while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+ spin_lock(&init_mm.page_table_lock);
+ pmdp = pmd_offset(pgd_offset_k(v), v);
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ pmd_val(*pmdp++) = val;
+ spin_unlock(&init_mm.page_table_lock);
+
+ v += LARGE_PAGE_SIZE_16M;
+ p += LARGE_PAGE_SIZE_16M;
+ s += LARGE_PAGE_SIZE_16M;
+ }
+
+ while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
+ pmd_t *pmdp;
+ unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+
+ spin_lock(&init_mm.page_table_lock);
+ pmdp = pmd_offset(pgd_offset_k(v), v);
+ pmd_val(*pmdp) = val;
+ spin_unlock(&init_mm.page_table_lock);
+
+ v += LARGE_PAGE_SIZE_4M;
+ p += LARGE_PAGE_SIZE_4M;
+ s += LARGE_PAGE_SIZE_4M;
+ }
+
+ return s;
+}
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
new file mode 100644
index 0000000..9f52c26
--- /dev/null
+++ b/arch/powerpc/mm/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the linux ppc-specific parts of the memory manager.
+#
+
+obj-y := fault.o mem.o
+obj-$(CONFIG_PPC32) += init.o pgtable.o mmu_context.o \
+ mem_pieces.o tlb.o
+obj-$(CONFIG_PPC64) += init64.o pgtable64.o mmu_context64.o
+obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu.o hash_32.o
+obj-$(CONFIG_40x) += 4xx_mmu.o
+obj-$(CONFIG_44x) += 44x_mmu.o
+obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
new file mode 100644
index 0000000..3df641f
--- /dev/null
+++ b/arch/powerpc/mm/fault.c
@@ -0,0 +1,391 @@
+/*
+ * arch/ppc/mm/fault.c
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Derived from "arch/i386/mm/fault.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Modified by Cort Dougan and Paul Mackerras.
+ *
+ * Modified for PPC64 by Dave Engebretsen (engebret@ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/tlbflush.h>
+#include <asm/kdebug.h>
+#include <asm/siginfo.h>
+
+/*
+ * Check whether the instruction at regs->nip is a store using
+ * an update addressing form which will update r1.
+ */
+static int store_updates_sp(struct pt_regs *regs)
+{
+ unsigned int inst;
+
+ if (get_user(inst, (unsigned int __user *)regs->nip))
+ return 0;
+ /* check for 1 in the rA field */
+ if (((inst >> 16) & 0x1f) != 1)
+ return 0;
+ /* check major opcode */
+ switch (inst >> 26) {
+ case 37: /* stwu */
+ case 39: /* stbu */
+ case 45: /* sthu */
+ case 53: /* stfsu */
+ case 55: /* stfdu */
+ return 1;
+ case 62: /* std or stdu */
+ return (inst & 3) == 1;
+ case 31:
+ /* check minor opcode */
+ switch ((inst >> 1) & 0x3ff) {
+ case 181: /* stdux */
+ case 183: /* stwux */
+ case 247: /* stbux */
+ case 439: /* sthux */
+ case 695: /* stfsux */
+ case 759: /* stfdux */
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static void do_dabr(struct pt_regs *regs, unsigned long error_code)
+{
+ siginfo_t info;
+
+ if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+ 11, SIGSEGV) == NOTIFY_STOP)
+ return;
+
+ if (debugger_dabr_match(regs))
+ return;
+
+ /* Clear the DABR */
+ set_dabr(0);
+
+ /* Deliver the signal to userspace */
+ info.si_signo = SIGTRAP;
+ info.si_errno = 0;
+ info.si_code = TRAP_HWBKPT;
+ info.si_addr = (void __user *)regs->nip;
+ force_sig_info(SIGTRAP, &info, current);
+}
+
+/*
+ * For 600- and 800-family processors, the error_code parameter is DSISR
+ * for a data fault, SRR1 for an instruction fault. For 400-family processors
+ * the error_code parameter is ESR for a data fault, 0 for an instruction
+ * fault.
+ * For 64-bit processors, the error_code parameter is
+ * - DSISR for a non-SLB data access fault,
+ * - SRR1 & 0x08000000 for a non-SLB instruction access fault
+ * - 0 any SLB fault.
+ *
+ * The return value is 0 if the fault was handled, or the signal
+ * number if this is a kernel fault that can't be handled here.
+ */
+int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
+ unsigned long error_code)
+{
+ struct vm_area_struct * vma;
+ struct mm_struct *mm = current->mm;
+ siginfo_t info;
+ int code = SEGV_MAPERR;
+ int is_write = 0;
+ int trap = TRAP(regs);
+ int is_exec = trap == 0x400;
+
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+ /*
+ * Fortunately the bit assignments in SRR1 for an instruction
+ * fault and DSISR for a data fault are mostly the same for the
+ * bits we are interested in. But there are some bits which
+ * indicate errors in DSISR but can validly be set in SRR1.
+ */
+ if (trap == 0x400)
+ error_code &= 0x48200000;
+ else
+ is_write = error_code & DSISR_ISSTORE;
+#else
+ is_write = error_code & ESR_DST;
+#endif /* CONFIG_4xx || CONFIG_BOOKE */
+
+ if (notify_die(DIE_PAGE_FAULT, "page_fault", regs, error_code,
+ 11, SIGSEGV) == NOTIFY_STOP)
+ return 0;
+
+ if (trap == 0x300) {
+ if (debugger_fault_handler(regs))
+ return 0;
+ }
+
+ /* On a kernel SLB miss we can only check for a valid exception entry */
+ if (!user_mode(regs) && (address >= TASK_SIZE))
+ return SIGSEGV;
+
+#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
+ if (error_code & DSISR_DABRMATCH) {
+ /* DABR match */
+ do_dabr(regs, error_code);
+ return 0;
+ }
+#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
+
+ if (in_atomic() || mm == NULL) {
+ if (!user_mode(regs))
+ return SIGSEGV;
+ /* in_atomic() in user mode is really bad,
+ as is current->mm == NULL. */
+ printk(KERN_EMERG "Page fault in user mode with"
+ "in_atomic() = %d mm = %p\n", in_atomic(), mm);
+ printk(KERN_EMERG "NIP = %lx MSR = %lx\n",
+ regs->nip, regs->msr);
+ die("Weird page fault", regs, SIGSEGV);
+ }
+
+ /* When running in the kernel we expect faults to occur only to
+ * addresses in user space. All other faults represent errors in the
+ * kernel and should generate an OOPS. Unfortunatly, in the case of an
+ * erroneous fault occuring in a code path which already holds mmap_sem
+ * we will deadlock attempting to validate the fault against the
+ * address space. Luckily the kernel only validly references user
+ * space from well defined areas of code, which are listed in the
+ * exceptions table.
+ *
+ * As the vast majority of faults will be valid we will only perform
+ * the source reference check when there is a possibilty of a deadlock.
+ * Attempt to lock the address space, if we cannot we then validate the
+ * source. If this is invalid we can skip the address space check,
+ * thus avoiding the deadlock.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if (!user_mode(regs) && !search_exception_tables(regs->nip))
+ goto bad_area_nosemaphore;
+
+ down_read(&mm->mmap_sem);
+ }
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+
+ /*
+ * N.B. The POWER/Open ABI allows programs to access up to
+ * 288 bytes below the stack pointer.
+ * The kernel signal delivery code writes up to about 1.5kB
+ * below the stack pointer (r1) before decrementing it.
+ * The exec code can write slightly over 640kB to the stack
+ * before setting the user r1. Thus we allow the stack to
+ * expand to 1MB without further checks.
+ */
+ if (address + 0x100000 < vma->vm_end) {
+ /* get user regs even if this fault is in kernel mode */
+ struct pt_regs *uregs = current->thread.regs;
+ if (uregs == NULL)
+ goto bad_area;
+
+ /*
+ * A user-mode access to an address a long way below
+ * the stack pointer is only valid if the instruction
+ * is one which would update the stack pointer to the
+ * address accessed if the instruction completed,
+ * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
+ * (or the byte, halfword, float or double forms).
+ *
+ * If we don't check this then any write to the area
+ * between the last mapped region and the stack will
+ * expand the stack rather than segfaulting.
+ */
+ if (address + 2048 < uregs->gpr[1]
+ && (!user_mode(regs) || !store_updates_sp(regs)))
+ goto bad_area;
+ }
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+good_area:
+ code = SEGV_ACCERR;
+#if defined(CONFIG_6xx)
+ if (error_code & 0x95700000)
+ /* an error such as lwarx to I/O controller space,
+ address matching DABR, eciwx, etc. */
+ goto bad_area;
+#endif /* CONFIG_6xx */
+#if defined(CONFIG_8xx)
+ /* The MPC8xx seems to always set 0x80000000, which is
+ * "undefined". Of those that can be set, this is the only
+ * one which seems bad.
+ */
+ if (error_code & 0x10000000)
+ /* Guarded storage error. */
+ goto bad_area;
+#endif /* CONFIG_8xx */
+
+ if (is_exec) {
+#ifdef CONFIG_PPC64
+ /* protection fault */
+ if (error_code & DSISR_PROTFAULT)
+ goto bad_area;
+ if (!(vma->vm_flags & VM_EXEC))
+ goto bad_area;
+#endif
+#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
+ pte_t *ptep;
+
+ /* Since 4xx/Book-E supports per-page execute permission,
+ * we lazily flush dcache to icache. */
+ ptep = NULL;
+ if (get_pteptr(mm, address, &ptep) && pte_present(*ptep)) {
+ struct page *page = pte_page(*ptep);
+
+ if (! test_bit(PG_arch_1, &page->flags)) {
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+ pte_update(ptep, 0, _PAGE_HWEXEC);
+ _tlbie(address);
+ pte_unmap(ptep);
+ up_read(&mm->mmap_sem);
+ return 0;
+ }
+ if (ptep != NULL)
+ pte_unmap(ptep);
+#endif
+ /* a write */
+ } else if (is_write) {
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ /* a read */
+ } else {
+ /* protection fault */
+ if (error_code & 0x08000000)
+ goto bad_area;
+ if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ goto bad_area;
+ }
+
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ survive:
+ switch (handle_mm_fault(mm, vma, address, is_write)) {
+
+ case VM_FAULT_MINOR:
+ current->min_flt++;
+ break;
+ case VM_FAULT_MAJOR:
+ current->maj_flt++;
+ break;
+ case VM_FAULT_SIGBUS:
+ goto do_sigbus;
+ case VM_FAULT_OOM:
+ goto out_of_memory;
+ default:
+ BUG();
+ }
+
+ up_read(&mm->mmap_sem);
+ return 0;
+
+bad_area:
+ up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+ /* User mode accesses cause a SIGSEGV */
+ if (user_mode(regs)) {
+ _exception(SIGSEGV, regs, code, address);
+ return 0;
+ }
+
+ if (is_exec && (error_code & DSISR_PROTFAULT)
+ && printk_ratelimit())
+ printk(KERN_CRIT "kernel tried to execute NX-protected"
+ " page (%lx) - exploit attempt? (uid: %d)\n",
+ address, current->uid);
+
+ return SIGSEGV;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ if (current->pid == 1) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ printk("VM: killing process %s\n", current->comm);
+ if (user_mode(regs))
+ do_exit(SIGKILL);
+ return SIGKILL;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+ if (user_mode(regs)) {
+ info.si_signo = SIGBUS;
+ info.si_errno = 0;
+ info.si_code = BUS_ADRERR;
+ info.si_addr = (void __user *)address;
+ force_sig_info(SIGBUS, &info, current);
+ return 0;
+ }
+ return SIGBUS;
+}
+
+/*
+ * bad_page_fault is called when we have a bad access from the kernel.
+ * It is called from the DSI and ISI handlers in head.S and from some
+ * of the procedures in traps.c.
+ */
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+{
+ const struct exception_table_entry *entry;
+
+ /* Are we prepared to handle this fault? */
+ if ((entry = search_exception_tables(regs->nip)) != NULL) {
+ regs->nip = entry->fixup;
+ return;
+ }
+
+ /* kernel has accessed a bad area */
+ die("Kernel access of bad area", regs, sig);
+}
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
new file mode 100644
index 0000000..af9ca0e
--- /dev/null
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -0,0 +1,237 @@
+/*
+ * Modifications by Kumar Gala (kumar.gala@freescale.com) to support
+ * E500 Book E processors.
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This file contains the routines for initializing the MMU
+ * on the 4xx series of chips.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/bootx.h>
+#include <asm/machdep.h>
+#include <asm/setup.h>
+
+extern void loadcam_entry(unsigned int index);
+unsigned int tlbcam_index;
+unsigned int num_tlbcam_entries;
+static unsigned long __cam0, __cam1, __cam2;
+extern unsigned long total_lowmem;
+extern unsigned long __max_low_memory;
+#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
+
+#define NUM_TLBCAMS (16)
+
+struct tlbcam {
+ u32 MAS0;
+ u32 MAS1;
+ u32 MAS2;
+ u32 MAS3;
+ u32 MAS7;
+} TLBCAM[NUM_TLBCAMS];
+
+struct tlbcamrange {
+ unsigned long start;
+ unsigned long limit;
+ phys_addr_t phys;
+} tlbcam_addrs[NUM_TLBCAMS];
+
+extern unsigned int tlbcam_index;
+
+/*
+ * Return PA for this VA if it is mapped by a CAM, or 0
+ */
+unsigned long v_mapped_by_tlbcam(unsigned long va)
+{
+ int b;
+ for (b = 0; b < tlbcam_index; ++b)
+ if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit)
+ return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start);
+ return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_mapped_by_tlbcam(unsigned long pa)
+{
+ int b;
+ for (b = 0; b < tlbcam_index; ++b)
+ if (pa >= tlbcam_addrs[b].phys
+ && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+ +tlbcam_addrs[b].phys)
+ return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
+ return 0;
+}
+
+/*
+ * Set up one of the I/D BAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 4 between 4k and 256M.
+ */
+void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags, unsigned int pid)
+{
+ unsigned int tsize, lz;
+
+ asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+ tsize = (21 - lz) / 2;
+
+#ifdef CONFIG_SMP
+ if ((flags & _PAGE_NO_CACHE) == 0)
+ flags |= _PAGE_COHERENT;
+#endif
+
+ TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1);
+ TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid);
+ TLBCAM[index].MAS2 = virt & PAGE_MASK;
+
+ TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
+ TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
+
+ TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+ TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+
+#ifndef CONFIG_KGDB /* want user access for breakpoints */
+ if (flags & _PAGE_USER) {
+ TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+ TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+ }
+#else
+ TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
+ TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
+#endif
+
+ tlbcam_addrs[index].start = virt;
+ tlbcam_addrs[index].limit = virt + size - 1;
+ tlbcam_addrs[index].phys = phys;
+
+ loadcam_entry(index);
+}
+
+void invalidate_tlbcam_entry(int index)
+{
+ TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
+ TLBCAM[index].MAS1 = ~MAS1_VALID;
+
+ loadcam_entry(index);
+}
+
+void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
+ unsigned long cam2)
+{
+ settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+ tlbcam_index++;
+ if (cam1) {
+ tlbcam_index++;
+ settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+ }
+ if (cam2) {
+ tlbcam_index++;
+ settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+ }
+}
+
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
+{
+ flush_instruction_cache();
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+ cam_mapin_ram(__cam0, __cam1, __cam2);
+
+ return __cam0 + __cam1 + __cam2;
+}
+
+
+void __init
+adjust_total_lowmem(void)
+{
+ unsigned long max_low_mem = MAX_LOW_MEM;
+ unsigned long cam_max = 0x10000000;
+ unsigned long ram;
+
+ /* adjust CAM size to max_low_mem */
+ if (max_low_mem < cam_max)
+ cam_max = max_low_mem;
+
+ /* adjust lowmem size to max_low_mem */
+ if (max_low_mem < total_lowmem)
+ ram = max_low_mem;
+ else
+ ram = total_lowmem;
+
+ /* Calculate CAM values */
+ __cam0 = 1UL << 2 * (__ilog2(ram) / 2);
+ if (__cam0 > cam_max)
+ __cam0 = cam_max;
+ ram -= __cam0;
+ if (ram) {
+ __cam1 = 1UL << 2 * (__ilog2(ram) / 2);
+ if (__cam1 > cam_max)
+ __cam1 = cam_max;
+ ram -= __cam1;
+ }
+ if (ram) {
+ __cam2 = 1UL << 2 * (__ilog2(ram) / 2);
+ if (__cam2 > cam_max)
+ __cam2 = cam_max;
+ ram -= __cam2;
+ }
+
+ printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb,"
+ " CAM2=%ldMb residual: %ldMb\n",
+ __cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
+ (total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
+ __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
+}
diff --git a/arch/powerpc/mm/hash_32.S b/arch/powerpc/mm/hash_32.S
new file mode 100644
index 0000000..57278a8
--- /dev/null
+++ b/arch/powerpc/mm/hash_32.S
@@ -0,0 +1,618 @@
+/*
+ * arch/ppc/kernel/hashtable.S
+ *
+ * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Adapted for Power Macintosh by Paul Mackerras.
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ *
+ * This file contains low-level assembler routines for managing
+ * the PowerPC MMU hash table. (PPC 8xx processors don't use a
+ * hash table, so this file is not used on them.)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+#ifdef CONFIG_SMP
+ .comm mmu_hash_lock,4
+#endif /* CONFIG_SMP */
+
+/*
+ * Sync CPUs with hash_page taking & releasing the hash
+ * table lock
+ */
+#ifdef CONFIG_SMP
+ .text
+_GLOBAL(hash_page_sync)
+ lis r8,mmu_hash_lock@h
+ ori r8,r8,mmu_hash_lock@l
+ lis r0,0x0fff
+ b 10f
+11: lwz r6,0(r8)
+ cmpwi 0,r6,0
+ bne 11b
+10: lwarx r6,0,r8
+ cmpwi 0,r6,0
+ bne- 11b
+ stwcx. r0,0,r8
+ bne- 10b
+ isync
+ eieio
+ li r0,0
+ stw r0,0(r8)
+ blr
+#endif
+
+/*
+ * Load a PTE into the hash table, if possible.
+ * The address is in r4, and r3 contains an access flag:
+ * _PAGE_RW (0x400) if a write.
+ * r9 contains the SRR1 value, from which we use the MSR_PR bit.
+ * SPRG3 contains the physical address of the current task's thread.
+ *
+ * Returns to the caller if the access is illegal or there is no
+ * mapping for the address. Otherwise it places an appropriate PTE
+ * in the hash table and returns from the exception.
+ * Uses r0, r3 - r8, ctr, lr.
+ */
+ .text
+_GLOBAL(hash_page)
+#ifdef CONFIG_PPC64BRIDGE
+ mfmsr r0
+ clrldi r0,r0,1 /* make sure it's in 32-bit mode */
+ MTMSRD(r0)
+ isync
+#endif
+ tophys(r7,0) /* gets -KERNELBASE into r7 */
+#ifdef CONFIG_SMP
+ addis r8,r7,mmu_hash_lock@h
+ ori r8,r8,mmu_hash_lock@l
+ lis r0,0x0fff
+ b 10f
+11: lwz r6,0(r8)
+ cmpwi 0,r6,0
+ bne 11b
+10: lwarx r6,0,r8
+ cmpwi 0,r6,0
+ bne- 11b
+ stwcx. r0,0,r8
+ bne- 10b
+ isync
+#endif
+ /* Get PTE (linux-style) and check access */
+ lis r0,KERNELBASE@h /* check if kernel address */
+ cmplw 0,r4,r0
+ mfspr r8,SPRN_SPRG3 /* current task's THREAD (phys) */
+ ori r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
+ lwz r5,PGDIR(r8) /* virt page-table root */
+ blt+ 112f /* assume user more likely */
+ lis r5,swapper_pg_dir@ha /* if kernel address, use */
+ addi r5,r5,swapper_pg_dir@l /* kernel page table */
+ rlwimi r3,r9,32-12,29,29 /* MSR_PR -> _PAGE_USER */
+112: add r5,r5,r7 /* convert to phys addr */
+ rlwimi r5,r4,12,20,29 /* insert top 10 bits of address */
+ lwz r8,0(r5) /* get pmd entry */
+ rlwinm. r8,r8,0,0,19 /* extract address of pte page */
+#ifdef CONFIG_SMP
+ beq- hash_page_out /* return if no mapping */
+#else
+ /* XXX it seems like the 601 will give a machine fault on the
+ rfi if its alignment is wrong (bottom 4 bits of address are
+ 8 or 0xc) and we have had a not-taken conditional branch
+ to the address following the rfi. */
+ beqlr-
+#endif
+ rlwimi r8,r4,22,20,29 /* insert next 10 bits of address */
+ rlwinm r0,r3,32-3,24,24 /* _PAGE_RW access -> _PAGE_DIRTY */
+ ori r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
+
+ /*
+ * Update the linux PTE atomically. We do the lwarx up-front
+ * because almost always, there won't be a permission violation
+ * and there won't already be an HPTE, and thus we will have
+ * to update the PTE to set _PAGE_HASHPTE. -- paulus.
+ */
+retry:
+ lwarx r6,0,r8 /* get linux-style pte */
+ andc. r5,r3,r6 /* check access & ~permission */
+#ifdef CONFIG_SMP
+ bne- hash_page_out /* return if access not permitted */
+#else
+ bnelr-
+#endif
+ or r5,r0,r6 /* set accessed/dirty bits */
+ stwcx. r5,0,r8 /* attempt to update PTE */
+ bne- retry /* retry if someone got there first */
+
+ mfsrin r3,r4 /* get segment reg for segment */
+ mfctr r0
+ stw r0,_CTR(r11)
+ bl create_hpte /* add the hash table entry */
+
+#ifdef CONFIG_SMP
+ eieio
+ addis r8,r7,mmu_hash_lock@ha
+ li r0,0
+ stw r0,mmu_hash_lock@l(r8)
+#endif
+
+ /* Return from the exception */
+ lwz r5,_CTR(r11)
+ mtctr r5
+ lwz r0,GPR0(r11)
+ lwz r7,GPR7(r11)
+ lwz r8,GPR8(r11)
+ b fast_exception_return
+
+#ifdef CONFIG_SMP
+hash_page_out:
+ eieio
+ addis r8,r7,mmu_hash_lock@ha
+ li r0,0
+ stw r0,mmu_hash_lock@l(r8)
+ blr
+#endif /* CONFIG_SMP */
+
+/*
+ * Add an entry for a particular page to the hash table.
+ *
+ * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
+ *
+ * We assume any necessary modifications to the pte (e.g. setting
+ * the accessed bit) have already been done and that there is actually
+ * a hash table in use (i.e. we're not on a 603).
+ */
+_GLOBAL(add_hash_page)
+ mflr r0
+ stw r0,4(r1)
+
+ /* Convert context and va to VSID */
+ mulli r3,r3,897*16 /* multiply context by context skew */
+ rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */
+ mulli r0,r0,0x111 /* multiply by ESID skew */
+ add r3,r3,r0 /* note create_hpte trims to 24 bits */
+
+#ifdef CONFIG_SMP
+ rlwinm r8,r1,0,0,18 /* use cpu number to make tag */
+ lwz r8,TI_CPU(r8) /* to go in mmu_hash_lock */
+ oris r8,r8,12
+#endif /* CONFIG_SMP */
+
+ /*
+ * We disable interrupts here, even on UP, because we don't
+ * want to race with hash_page, and because we want the
+ * _PAGE_HASHPTE bit to be a reliable indication of whether
+ * the HPTE exists (or at least whether one did once).
+ * We also turn off the MMU for data accesses so that we
+ * we can't take a hash table miss (assuming the code is
+ * covered by a BAT). -- paulus
+ */
+ mfmsr r10
+ SYNC
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r0,0,28,26 /* clear MSR_DR */
+ mtmsr r0
+ SYNC_601
+ isync
+
+ tophys(r7,0)
+
+#ifdef CONFIG_SMP
+ addis r9,r7,mmu_hash_lock@ha
+ addi r9,r9,mmu_hash_lock@l
+10: lwarx r0,0,r9 /* take the mmu_hash_lock */
+ cmpi 0,r0,0
+ bne- 11f
+ stwcx. r8,0,r9
+ beq+ 12f
+11: lwz r0,0(r9)
+ cmpi 0,r0,0
+ beq 10b
+ b 11b
+12: isync
+#endif
+
+ /*
+ * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
+ * If _PAGE_HASHPTE was already set, we don't replace the existing
+ * HPTE, so we just unlock and return.
+ */
+ mr r8,r5
+ rlwimi r8,r4,22,20,29
+1: lwarx r6,0,r8
+ andi. r0,r6,_PAGE_HASHPTE
+ bne 9f /* if HASHPTE already set, done */
+ ori r5,r6,_PAGE_HASHPTE
+ stwcx. r5,0,r8
+ bne- 1b
+
+ bl create_hpte
+
+9:
+#ifdef CONFIG_SMP
+ eieio
+ li r0,0
+ stw r0,0(r9) /* clear mmu_hash_lock */
+#endif
+
+ /* reenable interrupts and DR */
+ mtmsr r10
+ SYNC_601
+ isync
+
+ lwz r0,4(r1)
+ mtlr r0
+ blr
+
+/*
+ * This routine adds a hardware PTE to the hash table.
+ * It is designed to be called with the MMU either on or off.
+ * r3 contains the VSID, r4 contains the virtual address,
+ * r5 contains the linux PTE, r6 contains the old value of the
+ * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
+ * offset to be added to addresses (0 if the MMU is on,
+ * -KERNELBASE if it is off).
+ * On SMP, the caller should have the mmu_hash_lock held.
+ * We assume that the caller has (or will) set the _PAGE_HASHPTE
+ * bit in the linux PTE in memory. The value passed in r6 should
+ * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
+ * this routine will skip the search for an existing HPTE.
+ * This procedure modifies r0, r3 - r6, r8, cr0.
+ * -- paulus.
+ *
+ * For speed, 4 of the instructions get patched once the size and
+ * physical address of the hash table are known. These definitions
+ * of Hash_base and Hash_bits below are just an example.
+ */
+Hash_base = 0xc0180000
+Hash_bits = 12 /* e.g. 256kB hash table */
+Hash_msk = (((1 << Hash_bits) - 1) * 64)
+
+#ifndef CONFIG_PPC64BRIDGE
+/* defines for the PTE format for 32-bit PPCs */
+#define PTE_SIZE 8
+#define PTEG_SIZE 64
+#define LG_PTEG_SIZE 6
+#define LDPTEu lwzu
+#define STPTE stw
+#define CMPPTE cmpw
+#define PTE_H 0x40
+#define PTE_V 0x80000000
+#define TST_V(r) rlwinm. r,r,0,0,0
+#define SET_V(r) oris r,r,PTE_V@h
+#define CLR_V(r,t) rlwinm r,r,0,1,31
+
+#else
+/* defines for the PTE format for 64-bit PPCs */
+#define PTE_SIZE 16
+#define PTEG_SIZE 128
+#define LG_PTEG_SIZE 7
+#define LDPTEu ldu
+#define STPTE std
+#define CMPPTE cmpd
+#define PTE_H 2
+#define PTE_V 1
+#define TST_V(r) andi. r,r,PTE_V
+#define SET_V(r) ori r,r,PTE_V
+#define CLR_V(r,t) li t,PTE_V; andc r,r,t
+#endif /* CONFIG_PPC64BRIDGE */
+
+#define HASH_LEFT 31-(LG_PTEG_SIZE+Hash_bits-1)
+#define HASH_RIGHT 31-LG_PTEG_SIZE
+
+_GLOBAL(create_hpte)
+ /* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
+ rlwinm r8,r5,32-10,31,31 /* _PAGE_RW -> PP lsb */
+ rlwinm r0,r5,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
+ and r8,r8,r0 /* writable if _RW & _DIRTY */
+ rlwimi r5,r5,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r5,r5,32-2,31,31 /* _PAGE_USER -> PP lsb */
+ ori r8,r8,0xe14 /* clear out reserved bits and M */
+ andc r8,r5,r8 /* PP = user? (rw&dirty? 2: 3): 0 */
+BEGIN_FTR_SECTION
+ ori r8,r8,_PAGE_COHERENT /* set M (coherence required) */
+END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
+
+ /* Construct the high word of the PPC-style PTE (r5) */
+#ifndef CONFIG_PPC64BRIDGE
+ rlwinm r5,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
+ rlwimi r5,r4,10,26,31 /* put in API (abbrev page index) */
+#else /* CONFIG_PPC64BRIDGE */
+ clrlwi r3,r3,8 /* reduce vsid to 24 bits */
+ sldi r5,r3,12 /* shift vsid into position */
+ rlwimi r5,r4,16,20,24 /* put in API (abbrev page index) */
+#endif /* CONFIG_PPC64BRIDGE */
+ SET_V(r5) /* set V (valid) bit */
+
+ /* Get the address of the primary PTE group in the hash table (r3) */
+_GLOBAL(hash_page_patch_A)
+ addis r0,r7,Hash_base@h /* base address of hash table */
+ rlwimi r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */
+ rlwinm r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+ xor r3,r3,r0 /* make primary hash */
+ li r0,8 /* PTEs/group */
+
+ /*
+ * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
+ * if it is clear, meaning that the HPTE isn't there already...
+ */
+ andi. r6,r6,_PAGE_HASHPTE
+ beq+ 10f /* no PTE: go look for an empty slot */
+ tlbie r4
+
+ addis r4,r7,htab_hash_searches@ha
+ lwz r6,htab_hash_searches@l(r4)
+ addi r6,r6,1 /* count how many searches we do */
+ stw r6,htab_hash_searches@l(r4)
+
+ /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+ mtctr r0
+ addi r4,r3,-PTE_SIZE
+1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
+ CMPPTE 0,r6,r5
+ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
+ beq+ found_slot
+
+ /* Search the secondary PTEG for a matching PTE */
+ ori r5,r5,PTE_H /* set H (secondary hash) bit */
+_GLOBAL(hash_page_patch_B)
+ xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
+ xori r4,r4,(-PTEG_SIZE & 0xffff)
+ addi r4,r4,-PTE_SIZE
+ mtctr r0
+2: LDPTEu r6,PTE_SIZE(r4)
+ CMPPTE 0,r6,r5
+ bdnzf 2,2b
+ beq+ found_slot
+ xori r5,r5,PTE_H /* clear H bit again */
+
+ /* Search the primary PTEG for an empty slot */
+10: mtctr r0
+ addi r4,r3,-PTE_SIZE /* search primary PTEG */
+1: LDPTEu r6,PTE_SIZE(r4) /* get next PTE */
+ TST_V(r6) /* test valid bit */
+ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
+ beq+ found_empty
+
+ /* update counter of times that the primary PTEG is full */
+ addis r4,r7,primary_pteg_full@ha
+ lwz r6,primary_pteg_full@l(r4)
+ addi r6,r6,1
+ stw r6,primary_pteg_full@l(r4)
+
+ /* Search the secondary PTEG for an empty slot */
+ ori r5,r5,PTE_H /* set H (secondary hash) bit */
+_GLOBAL(hash_page_patch_C)
+ xoris r4,r3,Hash_msk>>16 /* compute secondary hash */
+ xori r4,r4,(-PTEG_SIZE & 0xffff)
+ addi r4,r4,-PTE_SIZE
+ mtctr r0
+2: LDPTEu r6,PTE_SIZE(r4)
+ TST_V(r6)
+ bdnzf 2,2b
+ beq+ found_empty
+ xori r5,r5,PTE_H /* clear H bit again */
+
+ /*
+ * Choose an arbitrary slot in the primary PTEG to overwrite.
+ * Since both the primary and secondary PTEGs are full, and we
+ * have no information that the PTEs in the primary PTEG are
+ * more important or useful than those in the secondary PTEG,
+ * and we know there is a definite (although small) speed
+ * advantage to putting the PTE in the primary PTEG, we always
+ * put the PTE in the primary PTEG.
+ */
+ addis r4,r7,next_slot@ha
+ lwz r6,next_slot@l(r4)
+ addi r6,r6,PTE_SIZE
+ andi. r6,r6,7*PTE_SIZE
+ stw r6,next_slot@l(r4)
+ add r4,r3,r6
+
+#ifndef CONFIG_SMP
+ /* Store PTE in PTEG */
+found_empty:
+ STPTE r5,0(r4)
+found_slot:
+ STPTE r8,PTE_SIZE/2(r4)
+
+#else /* CONFIG_SMP */
+/*
+ * Between the tlbie above and updating the hash table entry below,
+ * another CPU could read the hash table entry and put it in its TLB.
+ * There are 3 cases:
+ * 1. using an empty slot
+ * 2. updating an earlier entry to change permissions (i.e. enable write)
+ * 3. taking over the PTE for an unrelated address
+ *
+ * In each case it doesn't really matter if the other CPUs have the old
+ * PTE in their TLB. So we don't need to bother with another tlbie here,
+ * which is convenient as we've overwritten the register that had the
+ * address. :-) The tlbie above is mainly to make sure that this CPU comes
+ * and gets the new PTE from the hash table.
+ *
+ * We do however have to make sure that the PTE is never in an invalid
+ * state with the V bit set.
+ */
+found_empty:
+found_slot:
+ CLR_V(r5,r0) /* clear V (valid) bit in PTE */
+ STPTE r5,0(r4)
+ sync
+ TLBSYNC
+ STPTE r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
+ sync
+ SET_V(r5)
+ STPTE r5,0(r4) /* finally set V bit in PTE */
+#endif /* CONFIG_SMP */
+
+ sync /* make sure pte updates get to memory */
+ blr
+
+ .comm next_slot,4
+ .comm primary_pteg_full,4
+ .comm htab_hash_searches,4
+
+/*
+ * Flush the entry for a particular page from the hash table.
+ *
+ * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
+ * int count)
+ *
+ * We assume that there is a hash table in use (Hash != 0).
+ */
+_GLOBAL(flush_hash_pages)
+ tophys(r7,0)
+
+ /*
+ * We disable interrupts here, even on UP, because we want
+ * the _PAGE_HASHPTE bit to be a reliable indication of
+ * whether the HPTE exists (or at least whether one did once).
+ * We also turn off the MMU for data accesses so that we
+ * we can't take a hash table miss (assuming the code is
+ * covered by a BAT). -- paulus
+ */
+ mfmsr r10
+ SYNC
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r0,0,28,26 /* clear MSR_DR */
+ mtmsr r0
+ SYNC_601
+ isync
+
+ /* First find a PTE in the range that has _PAGE_HASHPTE set */
+ rlwimi r5,r4,22,20,29
+1: lwz r0,0(r5)
+ cmpwi cr1,r6,1
+ andi. r0,r0,_PAGE_HASHPTE
+ bne 2f
+ ble cr1,19f
+ addi r4,r4,0x1000
+ addi r5,r5,4
+ addi r6,r6,-1
+ b 1b
+
+ /* Convert context and va to VSID */
+2: mulli r3,r3,897*16 /* multiply context by context skew */
+ rlwinm r0,r4,4,28,31 /* get ESID (top 4 bits of va) */
+ mulli r0,r0,0x111 /* multiply by ESID skew */
+ add r3,r3,r0 /* note code below trims to 24 bits */
+
+ /* Construct the high word of the PPC-style PTE (r11) */
+#ifndef CONFIG_PPC64BRIDGE
+ rlwinm r11,r3,7,1,24 /* put VSID in 0x7fffff80 bits */
+ rlwimi r11,r4,10,26,31 /* put in API (abbrev page index) */
+#else /* CONFIG_PPC64BRIDGE */
+ clrlwi r3,r3,8 /* reduce vsid to 24 bits */
+ sldi r11,r3,12 /* shift vsid into position */
+ rlwimi r11,r4,16,20,24 /* put in API (abbrev page index) */
+#endif /* CONFIG_PPC64BRIDGE */
+ SET_V(r11) /* set V (valid) bit */
+
+#ifdef CONFIG_SMP
+ addis r9,r7,mmu_hash_lock@ha
+ addi r9,r9,mmu_hash_lock@l
+ rlwinm r8,r1,0,0,18
+ add r8,r8,r7
+ lwz r8,TI_CPU(r8)
+ oris r8,r8,9
+10: lwarx r0,0,r9
+ cmpi 0,r0,0
+ bne- 11f
+ stwcx. r8,0,r9
+ beq+ 12f
+11: lwz r0,0(r9)
+ cmpi 0,r0,0
+ beq 10b
+ b 11b
+12: isync
+#endif
+
+ /*
+ * Check the _PAGE_HASHPTE bit in the linux PTE. If it is
+ * already clear, we're done (for this pte). If not,
+ * clear it (atomically) and proceed. -- paulus.
+ */
+33: lwarx r8,0,r5 /* fetch the pte */
+ andi. r0,r8,_PAGE_HASHPTE
+ beq 8f /* done if HASHPTE is already clear */
+ rlwinm r8,r8,0,31,29 /* clear HASHPTE bit */
+ stwcx. r8,0,r5 /* update the pte */
+ bne- 33b
+
+ /* Get the address of the primary PTE group in the hash table (r3) */
+_GLOBAL(flush_hash_patch_A)
+ addis r8,r7,Hash_base@h /* base address of hash table */
+ rlwimi r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* VSID -> hash */
+ rlwinm r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
+ xor r8,r0,r8 /* make primary hash */
+
+ /* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
+ li r0,8 /* PTEs/group */
+ mtctr r0
+ addi r12,r8,-PTE_SIZE
+1: LDPTEu r0,PTE_SIZE(r12) /* get next PTE */
+ CMPPTE 0,r0,r11
+ bdnzf 2,1b /* loop while ctr != 0 && !cr0.eq */
+ beq+ 3f
+
+ /* Search the secondary PTEG for a matching PTE */
+ ori r11,r11,PTE_H /* set H (secondary hash) bit */
+ li r0,8 /* PTEs/group */
+_GLOBAL(flush_hash_patch_B)
+ xoris r12,r8,Hash_msk>>16 /* compute secondary hash */
+ xori r12,r12,(-PTEG_SIZE & 0xffff)
+ addi r12,r12,-PTE_SIZE
+ mtctr r0
+2: LDPTEu r0,PTE_SIZE(r12)
+ CMPPTE 0,r0,r11
+ bdnzf 2,2b
+ xori r11,r11,PTE_H /* clear H again */
+ bne- 4f /* should rarely fail to find it */
+
+3: li r0,0
+ STPTE r0,0(r12) /* invalidate entry */
+4: sync
+ tlbie r4 /* in hw tlb too */
+ sync
+
+8: ble cr1,9f /* if all ptes checked */
+81: addi r6,r6,-1
+ addi r5,r5,4 /* advance to next pte */
+ addi r4,r4,0x1000
+ lwz r0,0(r5) /* check next pte */
+ cmpwi cr1,r6,1
+ andi. r0,r0,_PAGE_HASHPTE
+ bne 33b
+ bgt cr1,81b
+
+9:
+#ifdef CONFIG_SMP
+ TLBSYNC
+ li r0,0
+ stw r0,0(r9) /* clear mmu_hash_lock */
+#endif
+
+19: mtmsr r10
+ SYNC_601
+ isync
+ blr
diff --git a/arch/powerpc/mm/init.c b/arch/powerpc/mm/init.c
new file mode 100644
index 0000000..f4d983a
--- /dev/null
+++ b/arch/powerpc/mm/init.c
@@ -0,0 +1,581 @@
+/*
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/pagemap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/btext.h>
+#include <asm/tlb.h>
+#include <asm/bootinfo.h>
+#include <asm/prom.h>
+
+#include "mem_pieces.h"
+#include "mmu_decl.h"
+
+#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
+/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
+#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
+#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
+#endif
+#endif
+#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+unsigned long total_memory;
+unsigned long total_lowmem;
+
+unsigned long ppc_memstart;
+unsigned long ppc_memoffset = PAGE_OFFSET;
+
+int mem_init_done;
+int init_bootmem_done;
+int boot_mapsize;
+#ifdef CONFIG_PPC_PMAC
+unsigned long agp_special_page;
+#endif
+
+extern char _end[];
+extern char etext[], _stext[];
+extern char __init_begin, __init_end;
+
+#ifdef CONFIG_HIGHMEM
+pte_t *kmap_pte;
+pgprot_t kmap_prot;
+
+EXPORT_SYMBOL(kmap_prot);
+EXPORT_SYMBOL(kmap_pte);
+#endif
+
+void MMU_init(void);
+void set_phys_avail(unsigned long total_ram);
+
+/* XXX should be in current.h -- paulus */
+extern struct task_struct *current_set[NR_CPUS];
+
+char *klimit = _end;
+struct mem_pieces phys_avail;
+struct device_node *memory_node;
+
+/*
+ * this tells the system to map all of ram with the segregs
+ * (i.e. page tables) instead of the bats.
+ * -- Cort
+ */
+int __map_without_bats;
+int __map_without_ltlbs;
+
+/* max amount of RAM to use */
+unsigned long __max_memory;
+/* max amount of low RAM to map in */
+unsigned long __max_low_memory = MAX_LOW_MEM;
+
+/*
+ * Read in a property describing some pieces of memory.
+ */
+static int __init get_mem_prop(char *name, struct mem_pieces *mp)
+{
+ struct reg_property *rp;
+ int i, s;
+ unsigned int *ip;
+ int nac = prom_n_addr_cells(memory_node);
+ int nsc = prom_n_size_cells(memory_node);
+
+ ip = (unsigned int *) get_property(memory_node, name, &s);
+ if (ip == NULL) {
+ printk(KERN_ERR "error: couldn't get %s property on /memory\n",
+ name);
+ return 0;
+ }
+ s /= (nsc + nac) * 4;
+ rp = mp->regions;
+ for (i = 0; i < s; ++i, ip += nac+nsc) {
+ if (nac >= 2 && ip[nac-2] != 0)
+ continue;
+ rp->address = ip[nac-1];
+ if (nsc >= 2 && ip[nac+nsc-2] != 0)
+ rp->size = ~0U;
+ else
+ rp->size = ip[nac+nsc-1];
+ ++rp;
+ }
+ mp->n_regions = rp - mp->regions;
+
+ /* Make sure the pieces are sorted. */
+ mem_pieces_sort(mp);
+ mem_pieces_coalesce(mp);
+ return 1;
+}
+
+/*
+ * Collect information about physical RAM and which pieces are
+ * already in use from the device tree.
+ */
+unsigned long __init find_end_of_memory(void)
+{
+ unsigned long a, total;
+ struct mem_pieces phys_mem;
+
+ /*
+ * Find out where physical memory is, and check that it
+ * starts at 0 and is contiguous. It seems that RAM is
+ * always physically contiguous on Power Macintoshes.
+ *
+ * Supporting discontiguous physical memory isn't hard,
+ * it just makes the virtual <-> physical mapping functions
+ * more complicated (or else you end up wasting space
+ * in mem_map).
+ */
+ memory_node = find_devices("memory");
+ if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
+ || phys_mem.n_regions == 0)
+ panic("No RAM??");
+ a = phys_mem.regions[0].address;
+ if (a != 0)
+ panic("RAM doesn't start at physical address 0");
+ total = phys_mem.regions[0].size;
+
+ if (phys_mem.n_regions > 1) {
+ printk("RAM starting at 0x%x is not contiguous\n",
+ phys_mem.regions[1].address);
+ printk("Using RAM from 0 to 0x%lx\n", total-1);
+ }
+
+ return total;
+}
+
+/*
+ * Check for command-line options that affect what MMU_init will do.
+ */
+void MMU_setup(void)
+{
+ /* Check for nobats option (used in mapin_ram). */
+ if (strstr(cmd_line, "nobats")) {
+ __map_without_bats = 1;
+ }
+
+ if (strstr(cmd_line, "noltlbs")) {
+ __map_without_ltlbs = 1;
+ }
+
+ /* Look for mem= option on command line */
+ if (strstr(cmd_line, "mem=")) {
+ char *p, *q;
+ unsigned long maxmem = 0;
+
+ for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
+ q = p + 4;
+ if (p > cmd_line && p[-1] != ' ')
+ continue;
+ maxmem = simple_strtoul(q, &q, 0);
+ if (*q == 'k' || *q == 'K') {
+ maxmem <<= 10;
+ ++q;
+ } else if (*q == 'm' || *q == 'M') {
+ maxmem <<= 20;
+ ++q;
+ }
+ }
+ __max_memory = maxmem;
+ }
+}
+
+/*
+ * MMU_init sets up the basic memory mappings for the kernel,
+ * including both RAM and possibly some I/O regions,
+ * and sets up the page tables and the MMU hardware ready to go.
+ */
+void __init MMU_init(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("MMU:enter", 0x111);
+
+ /* parse args from command line */
+ MMU_setup();
+
+ /*
+ * Figure out how much memory we have, how much
+ * is lowmem, and how much is highmem. If we were
+ * passed the total memory size from the bootloader,
+ * just use it.
+ */
+ if (boot_mem_size)
+ total_memory = boot_mem_size;
+ else
+ total_memory = ppc_md.find_end_of_memory();
+
+ if (__max_memory && total_memory > __max_memory)
+ total_memory = __max_memory;
+ total_lowmem = total_memory;
+#ifdef CONFIG_FSL_BOOKE
+ /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
+ * entries, so we need to adjust lowmem to match the amount we can map
+ * in the fixed entries */
+ adjust_total_lowmem();
+#endif /* CONFIG_FSL_BOOKE */
+ if (total_lowmem > __max_low_memory) {
+ total_lowmem = __max_low_memory;
+#ifndef CONFIG_HIGHMEM
+ total_memory = total_lowmem;
+#endif /* CONFIG_HIGHMEM */
+ }
+ set_phys_avail(total_lowmem);
+
+ /* Initialize the MMU hardware */
+ if (ppc_md.progress)
+ ppc_md.progress("MMU:hw init", 0x300);
+ MMU_init_hw();
+
+ /* Map in all of RAM starting at KERNELBASE */
+ if (ppc_md.progress)
+ ppc_md.progress("MMU:mapin", 0x301);
+ mapin_ram();
+
+#ifdef CONFIG_HIGHMEM
+ ioremap_base = PKMAP_BASE;
+#else
+ ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
+#endif /* CONFIG_HIGHMEM */
+ ioremap_bot = ioremap_base;
+
+ /* Map in I/O resources */
+ if (ppc_md.progress)
+ ppc_md.progress("MMU:setio", 0x302);
+ if (ppc_md.setup_io_mappings)
+ ppc_md.setup_io_mappings();
+
+ /* Initialize the context management stuff */
+ mmu_context_init();
+
+ if (ppc_md.progress)
+ ppc_md.progress("MMU:exit", 0x211);
+
+#ifdef CONFIG_BOOTX_TEXT
+ /* By default, we are no longer mapped */
+ boot_text_mapped = 0;
+ /* Must be done last, or ppc_md.progress will die. */
+ map_boot_text();
+#endif
+}
+
+/* This is only called until mem_init is done. */
+void __init *early_get_page(void)
+{
+ void *p;
+
+ if (init_bootmem_done) {
+ p = alloc_bootmem_pages(PAGE_SIZE);
+ } else {
+ p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
+ }
+ return p;
+}
+
+/* Free up now-unused memory */
+static void free_sec(unsigned long start, unsigned long end, const char *name)
+{
+ unsigned long cnt = 0;
+
+ while (start < end) {
+ ClearPageReserved(virt_to_page(start));
+ set_page_count(virt_to_page(start), 1);
+ free_page(start);
+ cnt++;
+ start += PAGE_SIZE;
+ }
+ if (cnt) {
+ printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
+ totalram_pages += cnt;
+ }
+}
+
+void free_initmem(void)
+{
+#define FREESEC(TYPE) \
+ free_sec((unsigned long)(&__ ## TYPE ## _begin), \
+ (unsigned long)(&__ ## TYPE ## _end), \
+ #TYPE);
+
+ printk ("Freeing unused kernel memory:");
+ FREESEC(init);
+ printk("\n");
+ ppc_md.progress = NULL;
+#undef FREESEC
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (start < end)
+ printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ set_page_count(virt_to_page(start), 1);
+ free_page(start);
+ totalram_pages++;
+ }
+}
+#endif
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.
+ */
+void __init do_init_bootmem(void)
+{
+ unsigned long start, size;
+ int i;
+
+ /*
+ * Find an area to use for the bootmem bitmap.
+ * We look for the first area which is at least
+ * 128kB in length (128kB is enough for a bitmap
+ * for 4GB of memory, using 4kB pages), plus 1 page
+ * (in case the address isn't page-aligned).
+ */
+ start = 0;
+ size = 0;
+ for (i = 0; i < phys_avail.n_regions; ++i) {
+ unsigned long a = phys_avail.regions[i].address;
+ unsigned long s = phys_avail.regions[i].size;
+ if (s <= size)
+ continue;
+ start = a;
+ size = s;
+ if (s >= 33 * PAGE_SIZE)
+ break;
+ }
+ start = PAGE_ALIGN(start);
+
+ min_low_pfn = start >> PAGE_SHIFT;
+ max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
+ max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
+ boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
+ PPC_MEMSTART >> PAGE_SHIFT,
+ max_low_pfn);
+
+ /* remove the bootmem bitmap from the available memory */
+ mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
+
+ /* add everything in phys_avail into the bootmem map */
+ for (i = 0; i < phys_avail.n_regions; ++i)
+ free_bootmem(phys_avail.regions[i].address,
+ phys_avail.regions[i].size);
+
+ init_bootmem_done = 1;
+}
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES], i;
+
+#ifdef CONFIG_HIGHMEM
+ map_page(PKMAP_BASE, 0, 0); /* XXX gross */
+ pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
+ (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
+ map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */
+ kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
+ (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
+ kmap_prot = PAGE_KERNEL;
+#endif /* CONFIG_HIGHMEM */
+
+ /*
+ * All pages are DMA-able so we put them all in the DMA zone.
+ */
+ zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ for (i = 1; i < MAX_NR_ZONES; i++)
+ zones_size[i] = 0;
+
+#ifdef CONFIG_HIGHMEM
+ zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
+#endif /* CONFIG_HIGHMEM */
+
+ free_area_init(zones_size);
+}
+
+void __init mem_init(void)
+{
+ unsigned long addr;
+ int codepages = 0;
+ int datapages = 0;
+ int initpages = 0;
+#ifdef CONFIG_HIGHMEM
+ unsigned long highmem_mapnr;
+
+ highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+#endif /* CONFIG_HIGHMEM */
+ max_mapnr = total_memory >> PAGE_SHIFT;
+
+ high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
+ num_physpages = max_mapnr; /* RAM is assumed contiguous */
+
+ totalram_pages += free_all_bootmem();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* if we are booted from BootX with an initial ramdisk,
+ make sure the ramdisk pages aren't reserved. */
+ if (initrd_start) {
+ for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
+ ClearPageReserved(virt_to_page(addr));
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+#ifdef CONFIG_PPC_OF
+ /* mark the RTAS pages as reserved */
+ if ( rtas_data )
+ for (addr = (ulong)__va(rtas_data);
+ addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ;
+ addr += PAGE_SIZE)
+ SetPageReserved(virt_to_page(addr));
+#endif
+#ifdef CONFIG_PPC_PMAC
+ if (agp_special_page)
+ SetPageReserved(virt_to_page(agp_special_page));
+#endif
+ for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
+ addr += PAGE_SIZE) {
+ if (!PageReserved(virt_to_page(addr)))
+ continue;
+ if (addr < (ulong) etext)
+ codepages++;
+ else if (addr >= (unsigned long)&__init_begin
+ && addr < (unsigned long)&__init_end)
+ initpages++;
+ else if (addr < (ulong) klimit)
+ datapages++;
+ }
+
+#ifdef CONFIG_HIGHMEM
+ {
+ unsigned long pfn;
+
+ for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
+ struct page *page = mem_map + pfn;
+
+ ClearPageReserved(page);
+ set_page_count(page, 1);
+ __free_page(page);
+ totalhigh_pages++;
+ }
+ totalram_pages += totalhigh_pages;
+ }
+#endif /* CONFIG_HIGHMEM */
+
+ printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
+ (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
+ codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
+ initpages<< (PAGE_SHIFT-10),
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+
+#ifdef CONFIG_PPC_PMAC
+ if (agp_special_page)
+ printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page);
+#endif
+
+ mem_init_done = 1;
+}
+
+/*
+ * Set phys_avail to the amount of physical memory,
+ * less the kernel text/data/bss.
+ */
+void __init
+set_phys_avail(unsigned long total_memory)
+{
+ unsigned long kstart, ksize;
+
+ /*
+ * Initially, available physical memory is equivalent to all
+ * physical memory.
+ */
+
+ phys_avail.regions[0].address = PPC_MEMSTART;
+ phys_avail.regions[0].size = total_memory;
+ phys_avail.n_regions = 1;
+
+ /*
+ * Map out the kernel text/data/bss from the available physical
+ * memory.
+ */
+
+ kstart = __pa(_stext); /* should be 0 */
+ ksize = PAGE_ALIGN(klimit - _stext);
+
+ mem_pieces_remove(&phys_avail, kstart, ksize, 0);
+ mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /* Remove the init RAM disk from the available memory. */
+ if (initrd_start) {
+ mem_pieces_remove(&phys_avail, __pa(initrd_start),
+ initrd_end - initrd_start, 1);
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+#ifdef CONFIG_PPC_OF
+ /* remove the RTAS pages from the available memory */
+ if (rtas_data)
+ mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1);
+#endif
+#ifdef CONFIG_PPC_PMAC
+ /* Because of some uninorth weirdness, we need a page of
+ * memory as high as possible (it must be outside of the
+ * bus address seen as the AGP aperture). It will be used
+ * by the r128 DRM driver
+ *
+ * FIXME: We need to make sure that page doesn't overlap any of the\
+ * above. This could be done by improving mem_pieces_find to be able
+ * to do a backward search from the end of the list.
+ */
+ if (_machine == _MACH_Pmac && find_devices("uni-north-agp")) {
+ agp_special_page = (total_memory - PAGE_SIZE);
+ mem_pieces_remove(&phys_avail, agp_special_page, PAGE_SIZE, 0);
+ agp_special_page = (unsigned long)__va(agp_special_page);
+ }
+#endif /* CONFIG_PPC_PMAC */
+}
+
+/* Mark some memory as reserved by removing it from phys_avail. */
+void __init reserve_phys_mem(unsigned long start, unsigned long size)
+{
+ mem_pieces_remove(&phys_avail, start, size, 1);
+}
diff --git a/arch/powerpc/mm/init64.c b/arch/powerpc/mm/init64.c
new file mode 100644
index 0000000..81f6745
--- /dev/null
+++ b/arch/powerpc/mm/init64.c
@@ -0,0 +1,385 @@
+/*
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Dave Engebretsen <engebret@us.ibm.com>
+ * Rework for PPC64 port.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/idr.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/rtas.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/tlb.h>
+#include <asm/eeh.h>
+#include <asm/processor.h>
+#include <asm/mmzone.h>
+#include <asm/cputable.h>
+#include <asm/ppcdebug.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/iommu.h>
+#include <asm/abs_addr.h>
+#include <asm/vdso.h>
+#include <asm/imalloc.h>
+
+#if PGTABLE_RANGE > USER_VSID_RANGE
+#warning Limited user VSID range means pagetable space is wasted
+#endif
+
+#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
+#warning TASK_SIZE is smaller than it needs to be.
+#endif
+
+int mem_init_done;
+unsigned long ioremap_bot = IMALLOC_BASE;
+static unsigned long phbs_io_bot = PHBS_IO_BASE;
+
+extern pgd_t swapper_pg_dir[];
+extern struct task_struct *current_set[NR_CPUS];
+
+unsigned long klimit = (unsigned long)_end;
+
+unsigned long _SDR1=0;
+unsigned long _ASR=0;
+
+/* max amount of RAM to use */
+unsigned long __max_memory;
+
+/* info on what we think the IO hole is */
+unsigned long io_hole_start;
+unsigned long io_hole_size;
+
+/*
+ * Do very early mm setup.
+ */
+void __init mm_init_ppc64(void)
+{
+#ifndef CONFIG_PPC_ISERIES
+ unsigned long i;
+#endif
+
+ ppc64_boot_msg(0x100, "MM Init");
+
+ /* This is the story of the IO hole... please, keep seated,
+ * unfortunately, we are out of oxygen masks at the moment.
+ * So we need some rough way to tell where your big IO hole
+ * is. On pmac, it's between 2G and 4G, on POWER3, it's around
+ * that area as well, on POWER4 we don't have one, etc...
+ * We need that as a "hint" when sizing the TCE table on POWER3
+ * So far, the simplest way that seem work well enough for us it
+ * to just assume that the first discontinuity in our physical
+ * RAM layout is the IO hole. That may not be correct in the future
+ * (and isn't on iSeries but then we don't care ;)
+ */
+
+#ifndef CONFIG_PPC_ISERIES
+ for (i = 1; i < lmb.memory.cnt; i++) {
+ unsigned long base, prevbase, prevsize;
+
+ prevbase = lmb.memory.region[i-1].base;
+ prevsize = lmb.memory.region[i-1].size;
+ base = lmb.memory.region[i].base;
+ if (base > (prevbase + prevsize)) {
+ io_hole_start = prevbase + prevsize;
+ io_hole_size = base - (prevbase + prevsize);
+ break;
+ }
+ }
+#endif /* CONFIG_PPC_ISERIES */
+ if (io_hole_start)
+ printk("IO Hole assumed to be %lx -> %lx\n",
+ io_hole_start, io_hole_start + io_hole_size - 1);
+
+ ppc64_boot_msg(0x100, "MM Init Done");
+}
+
+void free_initmem(void)
+{
+ unsigned long addr;
+
+ addr = (unsigned long)__init_begin;
+ for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) {
+ memset((void *)addr, 0xcc, PAGE_SIZE);
+ ClearPageReserved(virt_to_page(addr));
+ set_page_count(virt_to_page(addr), 1);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk ("Freeing unused kernel memory: %luk freed\n",
+ ((unsigned long)__init_end - (unsigned long)__init_begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ if (start < end)
+ printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ set_page_count(virt_to_page(start), 1);
+ free_page(start);
+ totalram_pages++;
+ }
+}
+#endif
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+void __init do_init_bootmem(void)
+{
+ unsigned long i;
+ unsigned long start, bootmap_pages;
+ unsigned long total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ int boot_mapsize;
+
+ /*
+ * Find an area to use for the bootmem bitmap. Calculate the size of
+ * bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
+ * Add 1 additional page in case the address isn't page-aligned.
+ */
+ bootmap_pages = bootmem_bootmap_pages(total_pages);
+
+ start = lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
+ BUG_ON(!start);
+
+ boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
+
+ max_pfn = max_low_pfn;
+
+ /* Add all physical memory to the bootmem map, mark each area
+ * present.
+ */
+ for (i=0; i < lmb.memory.cnt; i++)
+ free_bootmem(lmb.memory.region[i].base,
+ lmb_size_bytes(&lmb.memory, i));
+
+ /* reserve the sections we're already using */
+ for (i=0; i < lmb.reserved.cnt; i++)
+ reserve_bootmem(lmb.reserved.region[i].base,
+ lmb_size_bytes(&lmb.reserved, i));
+
+ for (i=0; i < lmb.memory.cnt; i++)
+ memory_present(0, lmb_start_pfn(&lmb.memory, i),
+ lmb_end_pfn(&lmb.memory, i));
+}
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES];
+ unsigned long zholes_size[MAX_NR_ZONES];
+ unsigned long total_ram = lmb_phys_mem_size();
+ unsigned long top_of_ram = lmb_end_of_DRAM();
+
+ printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
+ top_of_ram, total_ram);
+ printk(KERN_INFO "Memory hole size: %ldMB\n",
+ (top_of_ram - total_ram) >> 20);
+ /*
+ * All pages are DMA-able so we put them all in the DMA zone.
+ */
+ memset(zones_size, 0, sizeof(zones_size));
+ memset(zholes_size, 0, sizeof(zholes_size));
+
+ zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
+ zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
+
+ free_area_init_node(0, NODE_DATA(0), zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
+}
+#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
+
+static struct kcore_list kcore_vmem;
+
+static int __init setup_kcore(void)
+{
+ int i;
+
+ for (i=0; i < lmb.memory.cnt; i++) {
+ unsigned long base, size;
+ struct kcore_list *kcore_mem;
+
+ base = lmb.memory.region[i].base;
+ size = lmb.memory.region[i].size;
+
+ /* GFP_ATOMIC to avoid might_sleep warnings during boot */
+ kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
+ if (!kcore_mem)
+ panic("mem_init: kmalloc failed\n");
+
+ kclist_add(kcore_mem, __va(base), size);
+ }
+
+ kclist_add(&kcore_vmem, (void *)VMALLOC_START, VMALLOC_END-VMALLOC_START);
+
+ return 0;
+}
+module_init(setup_kcore);
+
+void __init mem_init(void)
+{
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+ int nid;
+#endif
+ pg_data_t *pgdat;
+ unsigned long i;
+ struct page *page;
+ unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
+
+ num_physpages = max_low_pfn; /* RAM is assumed contiguous */
+ high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+ for_each_online_node(nid) {
+ if (NODE_DATA(nid)->node_spanned_pages != 0) {
+ printk("freeing bootmem node %x\n", nid);
+ totalram_pages +=
+ free_all_bootmem_node(NODE_DATA(nid));
+ }
+ }
+#else
+ max_mapnr = num_physpages;
+ totalram_pages += free_all_bootmem();
+#endif
+
+ for_each_pgdat(pgdat) {
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ page = pgdat_page_nr(pgdat, i);
+ if (PageReserved(page))
+ reservedpages++;
+ }
+ }
+
+ codesize = (unsigned long)&_etext - (unsigned long)&_stext;
+ initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
+ datasize = (unsigned long)&_edata - (unsigned long)&__init_end;
+ bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
+
+ printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
+ "%luk reserved, %luk data, %luk bss, %luk init)\n",
+ (unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
+ num_physpages << (PAGE_SHIFT-10),
+ codesize >> 10,
+ reservedpages << (PAGE_SHIFT-10),
+ datasize >> 10,
+ bsssize >> 10,
+ initsize >> 10);
+
+ mem_init_done = 1;
+
+ /* Initialize the vDSO */
+ vdso_init();
+}
+
+void __iomem * reserve_phb_iospace(unsigned long size)
+{
+ void __iomem *virt_addr;
+
+ if (phbs_io_bot >= IMALLOC_BASE)
+ panic("reserve_phb_iospace(): phb io space overflow\n");
+
+ virt_addr = (void __iomem *) phbs_io_bot;
+ phbs_io_bot += size;
+
+ return virt_addr;
+}
+
+static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
+{
+ memset(addr, 0, kmem_cache_size(cache));
+}
+
+static const int pgtable_cache_size[2] = {
+ PTE_TABLE_SIZE, PMD_TABLE_SIZE
+};
+static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
+ "pgd_pte_cache", "pud_pmd_cache",
+};
+
+kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
+
+void pgtable_cache_init(void)
+{
+ int i;
+
+ BUILD_BUG_ON(PTE_TABLE_SIZE != pgtable_cache_size[PTE_CACHE_NUM]);
+ BUILD_BUG_ON(PMD_TABLE_SIZE != pgtable_cache_size[PMD_CACHE_NUM]);
+ BUILD_BUG_ON(PUD_TABLE_SIZE != pgtable_cache_size[PUD_CACHE_NUM]);
+ BUILD_BUG_ON(PGD_TABLE_SIZE != pgtable_cache_size[PGD_CACHE_NUM]);
+
+ for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
+ int size = pgtable_cache_size[i];
+ const char *name = pgtable_cache_name[i];
+
+ pgtable_cache[i] = kmem_cache_create(name,
+ size, size,
+ SLAB_HWCACHE_ALIGN
+ | SLAB_MUST_HWCACHE_ALIGN,
+ zero_ctor,
+ NULL);
+ if (! pgtable_cache[i])
+ panic("pgtable_cache_init(): could not create %s!\n",
+ name);
+ }
+}
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+ unsigned long size, pgprot_t vma_prot)
+{
+ if (ppc_md.phys_mem_access_prot)
+ return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot);
+
+ if (!page_is_ram(addr >> PAGE_SHIFT))
+ vma_prot = __pgprot(pgprot_val(vma_prot)
+ | _PAGE_GUARDED | _PAGE_NO_CACHE);
+ return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
new file mode 100644
index 0000000..345db08
--- /dev/null
+++ b/arch/powerpc/mm/mem.c
@@ -0,0 +1,299 @@
+/*
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ * PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/initrd.h>
+#include <linux/pagemap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/prom.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/btext.h>
+#include <asm/tlb.h>
+#include <asm/bootinfo.h>
+#include <asm/prom.h>
+
+#include "mem_pieces.h"
+#include "mmu_decl.h"
+
+#ifndef CPU_FTR_COHERENT_ICACHE
+#define CPU_FTR_COHERENT_ICACHE 0 /* XXX for now */
+#define CPU_FTR_NOEXECUTE 0
+#endif
+
+/*
+ * This is called by /dev/mem to know if a given address has to
+ * be mapped non-cacheable or not
+ */
+int page_is_ram(unsigned long pfn)
+{
+ unsigned long paddr = (pfn << PAGE_SHIFT);
+
+#ifndef CONFIG_PPC64 /* XXX for now */
+ return paddr < __pa(high_memory);
+#else
+ int i;
+ for (i=0; i < lmb.memory.cnt; i++) {
+ unsigned long base;
+
+ base = lmb.memory.region[i].base;
+
+ if ((paddr >= base) &&
+ (paddr < (base + lmb.memory.region[i].size))) {
+ return 1;
+ }
+ }
+
+ return 0;
+#endif
+}
+EXPORT_SYMBOL(page_is_ram);
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+ unsigned long size, pgprot_t vma_prot)
+{
+ if (ppc_md.phys_mem_access_prot)
+ return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot);
+
+ if (!page_is_ram(addr >> PAGE_SHIFT))
+ vma_prot = __pgprot(pgprot_val(vma_prot)
+ | _PAGE_GUARDED | _PAGE_NO_CACHE);
+ return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+
+void show_mem(void)
+{
+ unsigned long total = 0, reserved = 0;
+ unsigned long shared = 0, cached = 0;
+ unsigned long highmem = 0;
+ struct page *page;
+ pg_data_t *pgdat;
+ unsigned long i;
+
+ printk("Mem-info:\n");
+ show_free_areas();
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ for_each_pgdat(pgdat) {
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ page = pgdat_page_nr(pgdat, i);
+ total++;
+ if (PageHighMem(page))
+ highmem++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
+ }
+ }
+ printk("%ld pages of RAM\n", total);
+#ifdef CONFIG_HIGHMEM
+ printk("%ld pages of HIGHMEM\n", highmem);
+#endif
+ printk("%ld reserved pages\n", reserved);
+ printk("%ld pages shared\n", shared);
+ printk("%ld pages swap cached\n", cached);
+}
+
+/*
+ * This is called when a page has been modified by the kernel.
+ * It just marks the page as not i-cache clean. We do the i-cache
+ * flush later when the page is given to a user process, if necessary.
+ */
+void flush_dcache_page(struct page *page)
+{
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+ /* avoid an atomic op if possible */
+ if (test_bit(PG_arch_1, &page->flags))
+ clear_bit(PG_arch_1, &page->flags);
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void flush_dcache_icache_page(struct page *page)
+{
+#ifdef CONFIG_BOOKE
+ void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
+ __flush_dcache_icache(start);
+ kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+#elif defined(CONFIG_8xx)
+ /* On 8xx there is no need to kmap since highmem is not supported */
+ __flush_dcache_icache(page_address(page));
+#else
+ __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
+#endif
+
+}
+void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
+{
+ clear_page(page);
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+ /*
+ * We shouldnt have to do this, but some versions of glibc
+ * require it (ld.so assumes zero filled pages are icache clean)
+ * - Anton
+ */
+
+ /* avoid an atomic op if possible */
+ if (test_bit(PG_arch_1, &pg->flags))
+ clear_bit(PG_arch_1, &pg->flags);
+}
+EXPORT_SYMBOL(clear_user_page);
+
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *pg)
+{
+ copy_page(vto, vfrom);
+
+ /*
+ * We should be able to use the following optimisation, however
+ * there are two problems.
+ * Firstly a bug in some versions of binutils meant PLT sections
+ * were not marked executable.
+ * Secondly the first word in the GOT section is blrl, used
+ * to establish the GOT address. Until recently the GOT was
+ * not marked executable.
+ * - Anton
+ */
+#if 0
+ if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0))
+ return;
+#endif
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+
+ /* avoid an atomic op if possible */
+ if (test_bit(PG_arch_1, &pg->flags))
+ clear_bit(PG_arch_1, &pg->flags);
+}
+
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ unsigned long addr, int len)
+{
+ unsigned long maddr;
+
+ maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
+ flush_icache_range(maddr, maddr + len);
+ kunmap(page);
+}
+EXPORT_SYMBOL(flush_icache_user_range);
+
+/*
+ * This is called at the end of handling a user page fault, when the
+ * fault has been handled by updating a PTE in the linux page tables.
+ * We use it to preload an HPTE into the hash table corresponding to
+ * the updated linux PTE.
+ *
+ * This must always be called with the mm->page_table_lock held
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+ pte_t pte)
+{
+ /* handle i-cache coherency */
+ unsigned long pfn = pte_pfn(pte);
+#ifdef CONFIG_PPC32
+ pmd_t *pmd;
+#else
+ unsigned long vsid;
+ void *pgdir;
+ pte_t *ptep;
+ int local = 0;
+ cpumask_t tmp;
+ unsigned long flags;
+#endif
+
+ /* handle i-cache coherency */
+ if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
+ !cpu_has_feature(CPU_FTR_NOEXECUTE) &&
+ pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+ if (!PageReserved(page)
+ && !test_bit(PG_arch_1, &page->flags)) {
+ if (vma->vm_mm == current->active_mm) {
+#ifdef CONFIG_8xx
+ /* On 8xx, cache control instructions (particularly
+ * "dcbst" from flush_dcache_icache) fault as write
+ * operation if there is an unpopulated TLB entry
+ * for the address in question. To workaround that,
+ * we invalidate the TLB here, thus avoiding dcbst
+ * misbehaviour.
+ */
+ _tlbie(address);
+#endif
+ __flush_dcache_icache((void *) address);
+ } else
+ flush_dcache_icache_page(page);
+ set_bit(PG_arch_1, &page->flags);
+ }
+ }
+
+#ifdef CONFIG_PPC_STD_MMU
+ /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
+ if (!pte_young(pte) || address >= TASK_SIZE)
+ return;
+#ifdef CONFIG_PPC32
+ if (Hash == 0)
+ return;
+ pmd = pmd_offset(pgd_offset(vma->vm_mm, address), address);
+ if (!pmd_none(*pmd))
+ add_hash_page(vma->vm_mm->context, address, pmd_val(*pmd));
+#else
+ pgdir = vma->vm_mm->pgd;
+ if (pgdir == NULL)
+ return;
+
+ ptep = find_linux_pte(pgdir, ea);
+ if (!ptep)
+ return;
+
+ vsid = get_vsid(vma->vm_mm->context.id, ea);
+
+ local_irq_save(flags);
+ tmp = cpumask_of_cpu(smp_processor_id());
+ if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
+ local = 1;
+
+ __hash_page(ea, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
+ 0x300, local);
+ local_irq_restore(flags);
+#endif
+#endif
+}
diff --git a/arch/powerpc/mm/mem64.c b/arch/powerpc/mm/mem64.c
new file mode 100644
index 0000000..ef765a8
--- /dev/null
+++ b/arch/powerpc/mm/mem64.c
@@ -0,0 +1,259 @@
+/*
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Dave Engebretsen <engebret@us.ibm.com>
+ * Rework for PPC64 port.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/idr.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/rtas.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/tlb.h>
+#include <asm/eeh.h>
+#include <asm/processor.h>
+#include <asm/mmzone.h>
+#include <asm/cputable.h>
+#include <asm/ppcdebug.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/iommu.h>
+#include <asm/abs_addr.h>
+#include <asm/vdso.h>
+#include <asm/imalloc.h>
+
+/*
+ * This is called by /dev/mem to know if a given address has to
+ * be mapped non-cacheable or not
+ */
+int page_is_ram(unsigned long pfn)
+{
+ int i;
+ unsigned long paddr = (pfn << PAGE_SHIFT);
+
+ for (i=0; i < lmb.memory.cnt; i++) {
+ unsigned long base;
+
+ base = lmb.memory.region[i].base;
+
+ if ((paddr >= base) &&
+ (paddr < (base + lmb.memory.region[i].size))) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(page_is_ram);
+
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long addr,
+ unsigned long size, pgprot_t vma_prot)
+{
+ if (ppc_md.phys_mem_access_prot)
+ return ppc_md.phys_mem_access_prot(file, addr, size, vma_prot);
+
+ if (!page_is_ram(addr >> PAGE_SHIFT))
+ vma_prot = __pgprot(pgprot_val(vma_prot)
+ | _PAGE_GUARDED | _PAGE_NO_CACHE);
+ return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+
+void show_mem(void)
+{
+ unsigned long total = 0, reserved = 0;
+ unsigned long shared = 0, cached = 0;
+ struct page *page;
+ pg_data_t *pgdat;
+ unsigned long i;
+
+ printk("Mem-info:\n");
+ show_free_areas();
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ for_each_pgdat(pgdat) {
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ page = pgdat_page_nr(pgdat, i);
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
+ }
+ }
+ printk("%ld pages of RAM\n", total);
+ printk("%ld reserved pages\n", reserved);
+ printk("%ld pages shared\n", shared);
+ printk("%ld pages swap cached\n", cached);
+}
+
+/*
+ * This is called when a page has been modified by the kernel.
+ * It just marks the page as not i-cache clean. We do the i-cache
+ * flush later when the page is given to a user process, if necessary.
+ */
+void flush_dcache_page(struct page *page)
+{
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+ /* avoid an atomic op if possible */
+ if (test_bit(PG_arch_1, &page->flags))
+ clear_bit(PG_arch_1, &page->flags);
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
+{
+ clear_page(page);
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+ /*
+ * We shouldnt have to do this, but some versions of glibc
+ * require it (ld.so assumes zero filled pages are icache clean)
+ * - Anton
+ */
+
+ /* avoid an atomic op if possible */
+ if (test_bit(PG_arch_1, &pg->flags))
+ clear_bit(PG_arch_1, &pg->flags);
+}
+EXPORT_SYMBOL(clear_user_page);
+
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *pg)
+{
+ copy_page(vto, vfrom);
+
+ /*
+ * We should be able to use the following optimisation, however
+ * there are two problems.
+ * Firstly a bug in some versions of binutils meant PLT sections
+ * were not marked executable.
+ * Secondly the first word in the GOT section is blrl, used
+ * to establish the GOT address. Until recently the GOT was
+ * not marked executable.
+ * - Anton
+ */
+#if 0
+ if (!vma->vm_file && ((vma->vm_flags & VM_EXEC) == 0))
+ return;
+#endif
+
+ if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ return;
+
+ /* avoid an atomic op if possible */
+ if (test_bit(PG_arch_1, &pg->flags))
+ clear_bit(PG_arch_1, &pg->flags);
+}
+
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ unsigned long addr, int len)
+{
+ unsigned long maddr;
+
+ maddr = (unsigned long)page_address(page) + (addr & ~PAGE_MASK);
+ flush_icache_range(maddr, maddr + len);
+}
+EXPORT_SYMBOL(flush_icache_user_range);
+
+/*
+ * This is called at the end of handling a user page fault, when the
+ * fault has been handled by updating a PTE in the linux page tables.
+ * We use it to preload an HPTE into the hash table corresponding to
+ * the updated linux PTE.
+ *
+ * This must always be called with the mm->page_table_lock held
+ */
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long ea,
+ pte_t pte)
+{
+ unsigned long vsid;
+ void *pgdir;
+ pte_t *ptep;
+ int local = 0;
+ cpumask_t tmp;
+ unsigned long flags;
+
+ /* handle i-cache coherency */
+ if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) &&
+ !cpu_has_feature(CPU_FTR_NOEXECUTE)) {
+ unsigned long pfn = pte_pfn(pte);
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+ if (!PageReserved(page)
+ && !test_bit(PG_arch_1, &page->flags)) {
+ __flush_dcache_icache(page_address(page));
+ set_bit(PG_arch_1, &page->flags);
+ }
+ }
+ }
+
+ /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
+ if (!pte_young(pte))
+ return;
+
+ pgdir = vma->vm_mm->pgd;
+ if (pgdir == NULL)
+ return;
+
+ ptep = find_linux_pte(pgdir, ea);
+ if (!ptep)
+ return;
+
+ vsid = get_vsid(vma->vm_mm->context.id, ea);
+
+ local_irq_save(flags);
+ tmp = cpumask_of_cpu(smp_processor_id());
+ if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
+ local = 1;
+
+ __hash_page(ea, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
+ 0x300, local);
+ local_irq_restore(flags);
+}
diff --git a/arch/powerpc/mm/mem_pieces.c b/arch/powerpc/mm/mem_pieces.c
new file mode 100644
index 0000000..3d63905
--- /dev/null
+++ b/arch/powerpc/mm/mem_pieces.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Changes to accommodate Power Macintoshes.
+ * Cort Dougan <cort@cs.nmt.edu>
+ * Rewrites.
+ * Grant Erickson <grant@lcse.umn.edu>
+ * General rework and split from mm/init.c.
+ *
+ * Module name: mem_pieces.c
+ *
+ * Description:
+ * Routines and data structures for manipulating and representing
+ * phyiscal memory extents (i.e. address/length pairs).
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <asm/page.h>
+
+#include "mem_pieces.h"
+
+extern struct mem_pieces phys_avail;
+
+static void mem_pieces_print(struct mem_pieces *);
+
+/*
+ * Scan a region for a piece of a given size with the required alignment.
+ */
+void __init *
+mem_pieces_find(unsigned int size, unsigned int align)
+{
+ int i;
+ unsigned a, e;
+ struct mem_pieces *mp = &phys_avail;
+
+ for (i = 0; i < mp->n_regions; ++i) {
+ a = mp->regions[i].address;
+ e = a + mp->regions[i].size;
+ a = (a + align - 1) & -align;
+ if (a + size <= e) {
+ mem_pieces_remove(mp, a, size, 1);
+ return (void *) __va(a);
+ }
+ }
+ panic("Couldn't find %u bytes at %u alignment\n", size, align);
+
+ return NULL;
+}
+
+/*
+ * Remove some memory from an array of pieces
+ */
+void __init
+mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
+ int must_exist)
+{
+ int i, j;
+ unsigned int end, rs, re;
+ struct reg_property *rp;
+
+ end = start + size;
+ for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
+ if (end > rp->address && start < rp->address + rp->size)
+ break;
+ }
+ if (i >= mp->n_regions) {
+ if (must_exist)
+ printk("mem_pieces_remove: [%x,%x) not in any region\n",
+ start, end);
+ return;
+ }
+ for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
+ rs = rp->address;
+ re = rs + rp->size;
+ if (must_exist && (start < rs || end > re)) {
+ printk("mem_pieces_remove: bad overlap [%x,%x) with",
+ start, end);
+ mem_pieces_print(mp);
+ must_exist = 0;
+ }
+ if (start > rs) {
+ rp->size = start - rs;
+ if (end < re) {
+ /* need to split this entry */
+ if (mp->n_regions >= MEM_PIECES_MAX)
+ panic("eek... mem_pieces overflow");
+ for (j = mp->n_regions; j > i + 1; --j)
+ mp->regions[j] = mp->regions[j-1];
+ ++mp->n_regions;
+ rp[1].address = end;
+ rp[1].size = re - end;
+ }
+ } else {
+ if (end < re) {
+ rp->address = end;
+ rp->size = re - end;
+ } else {
+ /* need to delete this entry */
+ for (j = i; j < mp->n_regions - 1; ++j)
+ mp->regions[j] = mp->regions[j+1];
+ --mp->n_regions;
+ --i;
+ --rp;
+ }
+ }
+ }
+}
+
+static void __init
+mem_pieces_print(struct mem_pieces *mp)
+{
+ int i;
+
+ for (i = 0; i < mp->n_regions; ++i)
+ printk(" [%x, %x)", mp->regions[i].address,
+ mp->regions[i].address + mp->regions[i].size);
+ printk("\n");
+}
+
+void __init
+mem_pieces_sort(struct mem_pieces *mp)
+{
+ unsigned long a, s;
+ int i, j;
+
+ for (i = 1; i < mp->n_regions; ++i) {
+ a = mp->regions[i].address;
+ s = mp->regions[i].size;
+ for (j = i - 1; j >= 0; --j) {
+ if (a >= mp->regions[j].address)
+ break;
+ mp->regions[j+1] = mp->regions[j];
+ }
+ mp->regions[j+1].address = a;
+ mp->regions[j+1].size = s;
+ }
+}
+
+void __init
+mem_pieces_coalesce(struct mem_pieces *mp)
+{
+ unsigned long a, s, ns;
+ int i, j, d;
+
+ d = 0;
+ for (i = 0; i < mp->n_regions; i = j) {
+ a = mp->regions[i].address;
+ s = mp->regions[i].size;
+ for (j = i + 1; j < mp->n_regions
+ && mp->regions[j].address - a <= s; ++j) {
+ ns = mp->regions[j].address + mp->regions[j].size - a;
+ if (ns > s)
+ s = ns;
+ }
+ mp->regions[d].address = a;
+ mp->regions[d].size = s;
+ ++d;
+ }
+ mp->n_regions = d;
+}
diff --git a/arch/powerpc/mm/mem_pieces.h b/arch/powerpc/mm/mem_pieces.h
new file mode 100644
index 0000000..e2b700d
--- /dev/null
+++ b/arch/powerpc/mm/mem_pieces.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Changes to accommodate Power Macintoshes.
+ * Cort Dougan <cort@cs.nmt.edu>
+ * Rewrites.
+ * Grant Erickson <grant@lcse.umn.edu>
+ * General rework and split from mm/init.c.
+ *
+ * Module name: mem_pieces.h
+ *
+ * Description:
+ * Routines and data structures for manipulating and representing
+ * phyiscal memory extents (i.e. address/length pairs).
+ *
+ */
+
+#ifndef __MEM_PIECES_H__
+#define __MEM_PIECES_H__
+
+#include <asm/prom.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* Type Definitions */
+
+#define MEM_PIECES_MAX 32
+
+struct mem_pieces {
+ int n_regions;
+ struct reg_property regions[MEM_PIECES_MAX];
+};
+
+/* Function Prototypes */
+
+extern void *mem_pieces_find(unsigned int size, unsigned int align);
+extern void mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
+ unsigned int size, int must_exist);
+extern void mem_pieces_coalesce(struct mem_pieces *mp);
+extern void mem_pieces_sort(struct mem_pieces *mp);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MEM_PIECES_H__ */
diff --git a/arch/powerpc/mm/mmu_context.c b/arch/powerpc/mm/mmu_context.c
new file mode 100644
index 0000000..a8816e0
--- /dev/null
+++ b/arch/powerpc/mm/mmu_context.c
@@ -0,0 +1,86 @@
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification. This includes the 6xx, 7xx, 7xxx,
+ * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+
+mm_context_t next_mmu_context;
+unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+#ifdef FEW_CONTEXTS
+atomic_t nr_free_contexts;
+struct mm_struct *context_mm[LAST_CONTEXT+1];
+void steal_context(void);
+#endif /* FEW_CONTEXTS */
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init
+mmu_context_init(void)
+{
+ /*
+ * Some processors have too few contexts to reserve one for
+ * init_mm, and require using context 0 for a normal task.
+ * Other processors reserve the use of context zero for the kernel.
+ * This code assumes FIRST_CONTEXT < 32.
+ */
+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
+ next_mmu_context = FIRST_CONTEXT;
+#ifdef FEW_CONTEXTS
+ atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
+#endif /* FEW_CONTEXTS */
+}
+
+#ifdef FEW_CONTEXTS
+/*
+ * Steal a context from a task that has one at the moment.
+ * This is only used on 8xx and 4xx and we presently assume that
+ * they don't do SMP. If they do then this will have to check
+ * whether the MM we steal is in use.
+ * We also assume that this is only used on systems that don't
+ * use an MMU hash table - this is true for 8xx and 4xx.
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :). This would be the
+ * place to implement an LRU scheme if anyone was motivated to do it.
+ * -- paulus
+ */
+void
+steal_context(void)
+{
+ struct mm_struct *mm;
+
+ /* free up context `next_mmu_context' */
+ /* if we shouldn't free context 0, don't... */
+ if (next_mmu_context < FIRST_CONTEXT)
+ next_mmu_context = FIRST_CONTEXT;
+ mm = context_mm[next_mmu_context];
+ flush_tlb_mm(mm);
+ destroy_context(mm);
+}
+#endif /* FEW_CONTEXTS */
diff --git a/arch/powerpc/mm/mmu_context64.c b/arch/powerpc/mm/mmu_context64.c
new file mode 100644
index 0000000..714a84d
--- /dev/null
+++ b/arch/powerpc/mm/mmu_context64.c
@@ -0,0 +1,63 @@
+/*
+ * MMU context allocation for 64-bit kernels.
+ *
+ * Copyright (C) 2004 Anton Blanchard, IBM Corp. <anton@samba.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+
+#include <asm/mmu_context.h>
+
+static DEFINE_SPINLOCK(mmu_context_lock);
+static DEFINE_IDR(mmu_context_idr);
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ int index;
+ int err;
+
+again:
+ if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL))
+ return -ENOMEM;
+
+ spin_lock(&mmu_context_lock);
+ err = idr_get_new_above(&mmu_context_idr, NULL, 1, &index);
+ spin_unlock(&mmu_context_lock);
+
+ if (err == -EAGAIN)
+ goto again;
+ else if (err)
+ return err;
+
+ if (index > MAX_CONTEXT) {
+ idr_remove(&mmu_context_idr, index);
+ return -ENOMEM;
+ }
+
+ mm->context.id = index;
+
+ return 0;
+}
+
+void destroy_context(struct mm_struct *mm)
+{
+ spin_lock(&mmu_context_lock);
+ idr_remove(&mmu_context_idr, mm->context.id);
+ spin_unlock(&mmu_context_lock);
+
+ mm->context.id = NO_CONTEXT;
+}
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
new file mode 100644
index 0000000..540f329
--- /dev/null
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -0,0 +1,85 @@
+/*
+ * Declarations of procedures and variables shared between files
+ * in arch/ppc/mm/.
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+#include <asm/tlbflush.h>
+#include <asm/mmu.h>
+
+extern void mapin_ram(void);
+extern int map_page(unsigned long va, phys_addr_t pa, int flags);
+extern void setbat(int index, unsigned long virt, unsigned long phys,
+ unsigned int size, int flags);
+extern void reserve_phys_mem(unsigned long start, unsigned long size);
+extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags, unsigned int pid);
+extern void invalidate_tlbcam_entry(int index);
+
+extern int __map_without_bats;
+extern unsigned long ioremap_base;
+extern unsigned long ioremap_bot;
+extern unsigned int rtas_data, rtas_size;
+
+extern unsigned long total_memory;
+extern unsigned long total_lowmem;
+extern int mem_init_done;
+
+extern PTE *Hash, *Hash_end;
+extern unsigned long Hash_size, Hash_mask;
+
+extern unsigned int num_tlbcam_entries;
+
+/* ...and now those things that may be slightly different between processor
+ * architectures. -- Dan
+ */
+#if defined(CONFIG_8xx)
+#define flush_HPTE(X, va, pg) _tlbie(va)
+#define MMU_init_hw() do { } while(0)
+#define mmu_mapin_ram() (0UL)
+
+#elif defined(CONFIG_4xx)
+#define flush_HPTE(X, va, pg) _tlbie(va)
+extern void MMU_init_hw(void);
+extern unsigned long mmu_mapin_ram(void);
+
+#elif defined(CONFIG_FSL_BOOKE)
+#define flush_HPTE(X, va, pg) _tlbie(va)
+extern void MMU_init_hw(void);
+extern unsigned long mmu_mapin_ram(void);
+extern void adjust_total_lowmem(void);
+
+#else
+/* anything except 4xx or 8xx */
+extern void MMU_init_hw(void);
+extern unsigned long mmu_mapin_ram(void);
+
+/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
+ * which includes all new 82xx processors. We need tlbie/tlbsync here
+ * in that case (I think). -- Dan.
+ */
+static inline void flush_HPTE(unsigned context, unsigned long va,
+ unsigned long pdval)
+{
+ if ((Hash != 0) &&
+ cpu_has_feature(CPU_FTR_HPTE_TABLE))
+ flush_hash_pages(0, va, pdval, 1);
+ else
+ _tlbie(va);
+}
+#endif
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
new file mode 100644
index 0000000..81a3d74
--- /dev/null
+++ b/arch/powerpc/mm/pgtable.c
@@ -0,0 +1,470 @@
+/*
+ * This file contains the routines setting up the linux page tables.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/io.h>
+
+#include "mmu_decl.h"
+
+unsigned long ioremap_base;
+unsigned long ioremap_bot;
+int io_bat_index;
+
+#if defined(CONFIG_6xx) || defined(CONFIG_POWER3)
+#define HAVE_BATS 1
+#endif
+
+#if defined(CONFIG_FSL_BOOKE)
+#define HAVE_TLBCAM 1
+#endif
+
+extern char etext[], _stext[];
+
+#ifdef CONFIG_SMP
+extern void hash_page_sync(void);
+#endif
+
+#ifdef HAVE_BATS
+extern unsigned long v_mapped_by_bats(unsigned long va);
+extern unsigned long p_mapped_by_bats(unsigned long pa);
+void setbat(int index, unsigned long virt, unsigned long phys,
+ unsigned int size, int flags);
+
+#else /* !HAVE_BATS */
+#define v_mapped_by_bats(x) (0UL)
+#define p_mapped_by_bats(x) (0UL)
+#endif /* HAVE_BATS */
+
+#ifdef HAVE_TLBCAM
+extern unsigned int tlbcam_index;
+extern unsigned long v_mapped_by_tlbcam(unsigned long va);
+extern unsigned long p_mapped_by_tlbcam(unsigned long pa);
+#else /* !HAVE_TLBCAM */
+#define v_mapped_by_tlbcam(x) (0UL)
+#define p_mapped_by_tlbcam(x) (0UL)
+#endif /* HAVE_TLBCAM */
+
+#ifdef CONFIG_PTE_64BIT
+/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
+#define PGDIR_ORDER 1
+#else
+#define PGDIR_ORDER 0
+#endif
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *ret;
+
+ ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
+ return ret;
+}
+
+void pgd_free(pgd_t *pgd)
+{
+ free_pages((unsigned long)pgd, PGDIR_ORDER);
+}
+
+pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ pte_t *pte;
+ extern int mem_init_done;
+ extern void *early_get_page(void);
+
+ if (mem_init_done) {
+ pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+ } else {
+ pte = (pte_t *)early_get_page();
+ if (pte)
+ clear_page(pte);
+ }
+ return pte;
+}
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ struct page *ptepage;
+
+#ifdef CONFIG_HIGHPTE
+ int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+#else
+ int flags = GFP_KERNEL | __GFP_REPEAT;
+#endif
+
+ ptepage = alloc_pages(flags, 0);
+ if (ptepage)
+ clear_highpage(ptepage);
+ return ptepage;
+}
+
+void pte_free_kernel(pte_t *pte)
+{
+#ifdef CONFIG_SMP
+ hash_page_sync();
+#endif
+ free_page((unsigned long)pte);
+}
+
+void pte_free(struct page *ptepage)
+{
+#ifdef CONFIG_SMP
+ hash_page_sync();
+#endif
+ __free_page(ptepage);
+}
+
+#ifndef CONFIG_PHYS_64BIT
+void __iomem *
+ioremap(phys_addr_t addr, unsigned long size)
+{
+ return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+#else /* CONFIG_PHYS_64BIT */
+void __iomem *
+ioremap64(unsigned long long addr, unsigned long size)
+{
+ return __ioremap(addr, size, _PAGE_NO_CACHE);
+}
+
+void __iomem *
+ioremap(phys_addr_t addr, unsigned long size)
+{
+ phys_addr_t addr64 = fixup_bigphys_addr(addr, size);
+
+ return ioremap64(addr64, size);
+}
+#endif /* CONFIG_PHYS_64BIT */
+
+void __iomem *
+__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
+{
+ unsigned long v, i;
+ phys_addr_t p;
+ int err;
+
+ /*
+ * Choose an address to map it to.
+ * Once the vmalloc system is running, we use it.
+ * Before then, we use space going down from ioremap_base
+ * (ioremap_bot records where we're up to).
+ */
+ p = addr & PAGE_MASK;
+ size = PAGE_ALIGN(addr + size) - p;
+
+ /*
+ * If the address lies within the first 16 MB, assume it's in ISA
+ * memory space
+ */
+ if (p < 16*1024*1024)
+ p += _ISA_MEM_BASE;
+
+ /*
+ * Don't allow anybody to remap normal RAM that we're using.
+ * mem_init() sets high_memory so only do the check after that.
+ */
+ if ( mem_init_done && (p < virt_to_phys(high_memory)) )
+ {
+ printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
+ __builtin_return_address(0));
+ return NULL;
+ }
+
+ if (size == 0)
+ return NULL;
+
+ /*
+ * Is it already mapped? Perhaps overlapped by a previous
+ * BAT mapping. If the whole area is mapped then we're done,
+ * otherwise remap it since we want to keep the virt addrs for
+ * each request contiguous.
+ *
+ * We make the assumption here that if the bottom and top
+ * of the range we want are mapped then it's mapped to the
+ * same virt address (and this is contiguous).
+ * -- Cort
+ */
+ if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
+ goto out;
+
+ if ((v = p_mapped_by_tlbcam(p)))
+ goto out;
+
+ if (mem_init_done) {
+ struct vm_struct *area;
+ area = get_vm_area(size, VM_IOREMAP);
+ if (area == 0)
+ return NULL;
+ v = (unsigned long) area->addr;
+ } else {
+ v = (ioremap_bot -= size);
+ }
+
+ if ((flags & _PAGE_PRESENT) == 0)
+ flags |= _PAGE_KERNEL;
+ if (flags & _PAGE_NO_CACHE)
+ flags |= _PAGE_GUARDED;
+
+ /*
+ * Should check if it is a candidate for a BAT mapping
+ */
+
+ err = 0;
+ for (i = 0; i < size && err == 0; i += PAGE_SIZE)
+ err = map_page(v+i, p+i, flags);
+ if (err) {
+ if (mem_init_done)
+ vunmap((void *)v);
+ return NULL;
+ }
+
+out:
+ return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
+}
+
+void iounmap(volatile void __iomem *addr)
+{
+ /*
+ * If mapped by BATs then there is nothing to do.
+ * Calling vfree() generates a benign warning.
+ */
+ if (v_mapped_by_bats((unsigned long)addr)) return;
+
+ if (addr > high_memory && (unsigned long) addr < ioremap_bot)
+ vunmap((void *) (PAGE_MASK & (unsigned long)addr));
+}
+
+void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+ return (void __iomem *) (port + _IO_BASE);
+}
+
+void ioport_unmap(void __iomem *addr)
+{
+ /* Nothing to do */
+}
+EXPORT_SYMBOL(ioport_map);
+EXPORT_SYMBOL(ioport_unmap);
+
+int
+map_page(unsigned long va, phys_addr_t pa, int flags)
+{
+ pmd_t *pd;
+ pte_t *pg;
+ int err = -ENOMEM;
+
+ spin_lock(&init_mm.page_table_lock);
+ /* Use upper 10 bits of VA to index the first level map */
+ pd = pmd_offset(pgd_offset_k(va), va);
+ /* Use middle 10 bits of VA to index the second-level map */
+ pg = pte_alloc_kernel(&init_mm, pd, va);
+ if (pg != 0) {
+ err = 0;
+ set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
+ if (mem_init_done)
+ flush_HPTE(0, va, pmd_val(*pd));
+ }
+ spin_unlock(&init_mm.page_table_lock);
+ return err;
+}
+
+/*
+ * Map in all of physical memory starting at KERNELBASE.
+ */
+void __init mapin_ram(void)
+{
+ unsigned long v, p, s, f;
+
+ s = mmu_mapin_ram();
+ v = KERNELBASE + s;
+ p = PPC_MEMSTART + s;
+ for (; s < total_lowmem; s += PAGE_SIZE) {
+ if ((char *) v >= _stext && (char *) v < etext)
+ f = _PAGE_RAM_TEXT;
+ else
+ f = _PAGE_RAM;
+ map_page(v, p, f);
+ v += PAGE_SIZE;
+ p += PAGE_SIZE;
+ }
+}
+
+/* is x a power of 2? */
+#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
+
+/* is x a power of 4? */
+#define is_power_of_4(x) ((x) != 0 && (((x) & (x-1)) == 0) && (ffs(x) & 1))
+
+/*
+ * Set up a mapping for a block of I/O.
+ * virt, phys, size must all be page-aligned.
+ * This should only be called before ioremap is called.
+ */
+void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
+ unsigned int size, int flags)
+{
+ int i;
+
+ if (virt > KERNELBASE && virt < ioremap_bot)
+ ioremap_bot = ioremap_base = virt;
+
+#ifdef HAVE_BATS
+ /*
+ * Use a BAT for this if possible...
+ */
+ if (io_bat_index < 2 && is_power_of_2(size)
+ && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
+ setbat(io_bat_index, virt, phys, size, flags);
+ ++io_bat_index;
+ return;
+ }
+#endif /* HAVE_BATS */
+
+#ifdef HAVE_TLBCAM
+ /*
+ * Use a CAM for this if possible...
+ */
+ if (tlbcam_index < num_tlbcam_entries && is_power_of_4(size)
+ && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
+ settlbcam(tlbcam_index, virt, phys, size, flags, 0);
+ ++tlbcam_index;
+ return;
+ }
+#endif /* HAVE_TLBCAM */
+
+ /* No BATs available, put it in the page tables. */
+ for (i = 0; i < size; i += PAGE_SIZE)
+ map_page(virt + i, phys + i, flags);
+}
+
+/* Scan the real Linux page tables and return a PTE pointer for
+ * a virtual address in a context.
+ * Returns true (1) if PTE was found, zero otherwise. The pointer to
+ * the PTE pointer is unmodified if PTE is not found.
+ */
+int
+get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int retval = 0;
+
+ pgd = pgd_offset(mm, addr & PAGE_MASK);
+ if (pgd) {
+ pmd = pmd_offset(pgd, addr & PAGE_MASK);
+ if (pmd_present(*pmd)) {
+ pte = pte_offset_map(pmd, addr & PAGE_MASK);
+ if (pte) {
+ retval = 1;
+ *ptep = pte;
+ /* XXX caller needs to do pte_unmap, yuck */
+ }
+ }
+ }
+ return(retval);
+}
+
+/* Find physical address for this virtual address. Normally used by
+ * I/O functions, but anyone can call it.
+ */
+unsigned long iopa(unsigned long addr)
+{
+ unsigned long pa;
+
+ /* I don't know why this won't work on PMacs or CHRP. It
+ * appears there is some bug, or there is some implicit
+ * mapping done not properly represented by BATs or in page
+ * tables.......I am actively working on resolving this, but
+ * can't hold up other stuff. -- Dan
+ */
+ pte_t *pte;
+ struct mm_struct *mm;
+
+ /* Check the BATs */
+ pa = v_mapped_by_bats(addr);
+ if (pa)
+ return pa;
+
+ /* Allow mapping of user addresses (within the thread)
+ * for DMA if necessary.
+ */
+ if (addr < TASK_SIZE)
+ mm = current->mm;
+ else
+ mm = &init_mm;
+
+ pa = 0;
+ if (get_pteptr(mm, addr, &pte)) {
+ pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
+ pte_unmap(pte);
+ }
+
+ return(pa);
+}
+
+/* This is will find the virtual address for a physical one....
+ * Swiped from APUS, could be dangerous :-).
+ * This is only a placeholder until I really find a way to make this
+ * work. -- Dan
+ */
+unsigned long
+mm_ptov (unsigned long paddr)
+{
+ unsigned long ret;
+#if 0
+ if (paddr < 16*1024*1024)
+ ret = ZTWO_VADDR(paddr);
+ else {
+ int i;
+
+ for (i = 0; i < kmap_chunk_count;){
+ unsigned long phys = kmap_chunks[i++];
+ unsigned long size = kmap_chunks[i++];
+ unsigned long virt = kmap_chunks[i++];
+ if (paddr >= phys
+ && paddr < (phys + size)){
+ ret = virt + paddr - phys;
+ goto exit;
+ }
+ }
+
+ ret = (unsigned long) __va(paddr);
+ }
+exit:
+#ifdef DEBUGPV
+ printk ("PTOV(%lx)=%lx\n", paddr, ret);
+#endif
+#else
+ ret = (unsigned long)paddr + KERNELBASE;
+#endif
+ return ret;
+}
+
diff --git a/arch/powerpc/mm/pgtable64.c b/arch/powerpc/mm/pgtable64.c
new file mode 100644
index 0000000..724f97e
--- /dev/null
+++ b/arch/powerpc/mm/pgtable64.c
@@ -0,0 +1,357 @@
+/*
+ * This file contains ioremap and related functions for 64-bit machines.
+ *
+ * Derived from arch/ppc64/mm/init.c
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@samba.org)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Dave Engebretsen <engebret@us.ibm.com>
+ * Rework for PPC64 port.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/stddef.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/idr.h>
+#include <linux/nodemask.h>
+#include <linux/module.h>
+
+#include <asm/pgalloc.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/rtas.h>
+#include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/mmu.h>
+#include <asm/uaccess.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/tlb.h>
+#include <asm/eeh.h>
+#include <asm/processor.h>
+#include <asm/mmzone.h>
+#include <asm/cputable.h>
+#include <asm/ppcdebug.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/iommu.h>
+#include <asm/abs_addr.h>
+#include <asm/vdso.h>
+#include <asm/imalloc.h>
+
+#if PGTABLE_RANGE > USER_VSID_RANGE
+#warning Limited user VSID range means pagetable space is wasted
+#endif
+
+#if (TASK_SIZE_USER64 < PGTABLE_RANGE) && (TASK_SIZE_USER64 < USER_VSID_RANGE)
+#warning TASK_SIZE is smaller than it needs to be.
+#endif
+
+int mem_init_done;
+unsigned long ioremap_bot = IMALLOC_BASE;
+static unsigned long phbs_io_bot = PHBS_IO_BASE;
+
+extern pgd_t swapper_pg_dir[];
+extern struct task_struct *current_set[NR_CPUS];
+
+unsigned long klimit = (unsigned long)_end;
+
+/* max amount of RAM to use */
+unsigned long __max_memory;
+
+/* info on what we think the IO hole is */
+unsigned long io_hole_start;
+unsigned long io_hole_size;
+
+#ifdef CONFIG_PPC_ISERIES
+
+void __iomem *ioremap(unsigned long addr, unsigned long size)
+{
+ return (void __iomem *)addr;
+}
+
+extern void __iomem *__ioremap(unsigned long addr, unsigned long size,
+ unsigned long flags)
+{
+ return (void __iomem *)addr;
+}
+
+void iounmap(volatile void __iomem *addr)
+{
+ return;
+}
+
+#else
+
+/*
+ * map_io_page currently only called by __ioremap
+ * map_io_page adds an entry to the ioremap page table
+ * and adds an entry to the HPT, possibly bolting it
+ */
+static int map_io_page(unsigned long ea, unsigned long pa, int flags)
+{
+ pgd_t *pgdp;
+ pud_t *pudp;
+ pmd_t *pmdp;
+ pte_t *ptep;
+ unsigned long vsid;
+
+ if (mem_init_done) {
+ spin_lock(&init_mm.page_table_lock);
+ pgdp = pgd_offset_k(ea);
+ pudp = pud_alloc(&init_mm, pgdp, ea);
+ if (!pudp)
+ return -ENOMEM;
+ pmdp = pmd_alloc(&init_mm, pudp, ea);
+ if (!pmdp)
+ return -ENOMEM;
+ ptep = pte_alloc_kernel(&init_mm, pmdp, ea);
+ if (!ptep)
+ return -ENOMEM;
+ set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
+ __pgprot(flags)));
+ spin_unlock(&init_mm.page_table_lock);
+ } else {
+ unsigned long va, vpn, hash, hpteg;
+
+ /*
+ * If the mm subsystem is not fully up, we cannot create a
+ * linux page table entry for this mapping. Simply bolt an
+ * entry in the hardware page table.
+ */
+ vsid = get_kernel_vsid(ea);
+ va = (vsid << 28) | (ea & 0xFFFFFFF);
+ vpn = va >> PAGE_SHIFT;
+
+ hash = hpt_hash(vpn, 0);
+
+ hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+
+ /* Panic if a pte grpup is full */
+ if (ppc_md.hpte_insert(hpteg, va, pa >> PAGE_SHIFT,
+ HPTE_V_BOLTED,
+ _PAGE_NO_CACHE|_PAGE_GUARDED|PP_RWXX)
+ == -1) {
+ panic("map_io_page: could not insert mapping");
+ }
+ }
+ return 0;
+}
+
+
+static void __iomem * __ioremap_com(unsigned long addr, unsigned long pa,
+ unsigned long ea, unsigned long size,
+ unsigned long flags)
+{
+ unsigned long i;
+
+ if ((flags & _PAGE_PRESENT) == 0)
+ flags |= pgprot_val(PAGE_KERNEL);
+
+ for (i = 0; i < size; i += PAGE_SIZE)
+ if (map_io_page(ea+i, pa+i, flags))
+ return NULL;
+
+ return (void __iomem *) (ea + (addr & ~PAGE_MASK));
+}
+
+
+void __iomem *
+ioremap(unsigned long addr, unsigned long size)
+{
+ return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
+}
+
+void __iomem * __ioremap(unsigned long addr, unsigned long size,
+ unsigned long flags)
+{
+ unsigned long pa, ea;
+ void __iomem *ret;
+
+ /*
+ * Choose an address to map it to.
+ * Once the imalloc system is running, we use it.
+ * Before that, we map using addresses going
+ * up from ioremap_bot. imalloc will use
+ * the addresses from ioremap_bot through
+ * IMALLOC_END
+ *
+ */
+ pa = addr & PAGE_MASK;
+ size = PAGE_ALIGN(addr + size) - pa;
+
+ if (size == 0)
+ return NULL;
+
+ if (mem_init_done) {
+ struct vm_struct *area;
+ area = im_get_free_area(size);
+ if (area == NULL)
+ return NULL;
+ ea = (unsigned long)(area->addr);
+ ret = __ioremap_com(addr, pa, ea, size, flags);
+ if (!ret)
+ im_free(area->addr);
+ } else {
+ ea = ioremap_bot;
+ ret = __ioremap_com(addr, pa, ea, size, flags);
+ if (ret)
+ ioremap_bot += size;
+ }
+ return ret;
+}
+
+#define IS_PAGE_ALIGNED(_val) ((_val) == ((_val) & PAGE_MASK))
+
+int __ioremap_explicit(unsigned long pa, unsigned long ea,
+ unsigned long size, unsigned long flags)
+{
+ struct vm_struct *area;
+ void __iomem *ret;
+
+ /* For now, require page-aligned values for pa, ea, and size */
+ if (!IS_PAGE_ALIGNED(pa) || !IS_PAGE_ALIGNED(ea) ||
+ !IS_PAGE_ALIGNED(size)) {
+ printk(KERN_ERR "unaligned value in %s\n", __FUNCTION__);
+ return 1;
+ }
+
+ if (!mem_init_done) {
+ /* Two things to consider in this case:
+ * 1) No records will be kept (imalloc, etc) that the region
+ * has been remapped
+ * 2) It won't be easy to iounmap() the region later (because
+ * of 1)
+ */
+ ;
+ } else {
+ area = im_get_area(ea, size,
+ IM_REGION_UNUSED|IM_REGION_SUBSET|IM_REGION_EXISTS);
+ if (area == NULL) {
+ /* Expected when PHB-dlpar is in play */
+ return 1;
+ }
+ if (ea != (unsigned long) area->addr) {
+ printk(KERN_ERR "unexpected addr return from "
+ "im_get_area\n");
+ return 1;
+ }
+ }
+
+ ret = __ioremap_com(pa, pa, ea, size, flags);
+ if (ret == NULL) {
+ printk(KERN_ERR "ioremap_explicit() allocation failure !\n");
+ return 1;
+ }
+ if (ret != (void *) ea) {
+ printk(KERN_ERR "__ioremap_com() returned unexpected addr\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Unmap an IO region and remove it from imalloc'd list.
+ * Access to IO memory should be serialized by driver.
+ * This code is modeled after vmalloc code - unmap_vm_area()
+ *
+ * XXX what about calls before mem_init_done (ie python_countermeasures())
+ */
+void iounmap(volatile void __iomem *token)
+{
+ void *addr;
+
+ if (!mem_init_done)
+ return;
+
+ addr = (void *) ((unsigned long __force) token & PAGE_MASK);
+
+ im_free(addr);
+}
+
+static int iounmap_subset_regions(unsigned long addr, unsigned long size)
+{
+ struct vm_struct *area;
+
+ /* Check whether subsets of this region exist */
+ area = im_get_area(addr, size, IM_REGION_SUPERSET);
+ if (area == NULL)
+ return 1;
+
+ while (area) {
+ iounmap((void __iomem *) area->addr);
+ area = im_get_area(addr, size,
+ IM_REGION_SUPERSET);
+ }
+
+ return 0;
+}
+
+int iounmap_explicit(volatile void __iomem *start, unsigned long size)
+{
+ struct vm_struct *area;
+ unsigned long addr;
+ int rc;
+
+ addr = (unsigned long __force) start & PAGE_MASK;
+
+ /* Verify that the region either exists or is a subset of an existing
+ * region. In the latter case, split the parent region to create
+ * the exact region
+ */
+ area = im_get_area(addr, size,
+ IM_REGION_EXISTS | IM_REGION_SUBSET);
+ if (area == NULL) {
+ /* Determine whether subset regions exist. If so, unmap */
+ rc = iounmap_subset_regions(addr, size);
+ if (rc) {
+ printk(KERN_ERR
+ "%s() cannot unmap nonexistent range 0x%lx\n",
+ __FUNCTION__, addr);
+ return 1;
+ }
+ } else {
+ iounmap((void __iomem *) area->addr);
+ }
+ /*
+ * FIXME! This can't be right:
+ iounmap(area->addr);
+ * Maybe it should be "iounmap(area);"
+ */
+ return 0;
+}
+
+#endif
+
+EXPORT_SYMBOL(ioremap);
+EXPORT_SYMBOL(__ioremap);
+EXPORT_SYMBOL(iounmap);
diff --git a/arch/powerpc/mm/ppc_mmu.c b/arch/powerpc/mm/ppc_mmu.c
new file mode 100644
index 0000000..9a381ed5
--- /dev/null
+++ b/arch/powerpc/mm/ppc_mmu.c
@@ -0,0 +1,296 @@
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification. This includes the 6xx, 7xx, 7xxx,
+ * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+
+#include <asm/prom.h>
+#include <asm/mmu.h>
+#include <asm/machdep.h>
+
+#include "mmu_decl.h"
+#include "mem_pieces.h"
+
+PTE *Hash, *Hash_end;
+unsigned long Hash_size, Hash_mask;
+unsigned long _SDR1;
+
+union ubat { /* BAT register values to be loaded */
+ BAT bat;
+#ifdef CONFIG_PPC64BRIDGE
+ u64 word[2];
+#else
+ u32 word[2];
+#endif
+} BATS[4][2]; /* 4 pairs of IBAT, DBAT */
+
+struct batrange { /* stores address ranges mapped by BATs */
+ unsigned long start;
+ unsigned long limit;
+ unsigned long phys;
+} bat_addrs[4];
+
+/*
+ * Return PA for this VA if it is mapped by a BAT, or 0
+ */
+unsigned long v_mapped_by_bats(unsigned long va)
+{
+ int b;
+ for (b = 0; b < 4; ++b)
+ if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
+ return bat_addrs[b].phys + (va - bat_addrs[b].start);
+ return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_mapped_by_bats(unsigned long pa)
+{
+ int b;
+ for (b = 0; b < 4; ++b)
+ if (pa >= bat_addrs[b].phys
+ && pa < (bat_addrs[b].limit-bat_addrs[b].start)
+ +bat_addrs[b].phys)
+ return bat_addrs[b].start+(pa-bat_addrs[b].phys);
+ return 0;
+}
+
+unsigned long __init mmu_mapin_ram(void)
+{
+#ifdef CONFIG_POWER4
+ return 0;
+#else
+ unsigned long tot, bl, done;
+ unsigned long max_size = (256<<20);
+ unsigned long align;
+
+ if (__map_without_bats)
+ return 0;
+
+ /* Set up BAT2 and if necessary BAT3 to cover RAM. */
+
+ /* Make sure we don't map a block larger than the
+ smallest alignment of the physical address. */
+ /* alignment of PPC_MEMSTART */
+ align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
+ /* set BAT block size to MIN(max_size, align) */
+ if (align && align < max_size)
+ max_size = align;
+
+ tot = total_lowmem;
+ for (bl = 128<<10; bl < max_size; bl <<= 1) {
+ if (bl * 2 > tot)
+ break;
+ }
+
+ setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
+ done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
+ if ((done < tot) && !bat_addrs[3].limit) {
+ /* use BAT3 to cover a bit more */
+ tot -= done;
+ for (bl = 128<<10; bl < max_size; bl <<= 1)
+ if (bl * 2 > tot)
+ break;
+ setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
+ done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
+ }
+
+ return done;
+#endif
+}
+
+/*
+ * Set up one of the I/D BAT (block address translation) register pairs.
+ * The parameters are not checked; in particular size must be a power
+ * of 2 between 128k and 256M.
+ */
+void __init setbat(int index, unsigned long virt, unsigned long phys,
+ unsigned int size, int flags)
+{
+ unsigned int bl;
+ int wimgxpp;
+ union ubat *bat = BATS[index];
+
+ if (((flags & _PAGE_NO_CACHE) == 0) &&
+ cpu_has_feature(CPU_FTR_NEED_COHERENT))
+ flags |= _PAGE_COHERENT;
+
+ bl = (size >> 17) - 1;
+ if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
+ /* 603, 604, etc. */
+ /* Do DBAT first */
+ wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
+ | _PAGE_COHERENT | _PAGE_GUARDED);
+ wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
+ bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+ bat[1].word[1] = phys | wimgxpp;
+#ifndef CONFIG_KGDB /* want user access for breakpoints */
+ if (flags & _PAGE_USER)
+#endif
+ bat[1].bat.batu.vp = 1;
+ if (flags & _PAGE_GUARDED) {
+ /* G bit must be zero in IBATs */
+ bat[0].word[0] = bat[0].word[1] = 0;
+ } else {
+ /* make IBAT same as DBAT */
+ bat[0] = bat[1];
+ }
+ } else {
+ /* 601 cpu */
+ if (bl > BL_8M)
+ bl = BL_8M;
+ wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
+ | _PAGE_COHERENT);
+ wimgxpp |= (flags & _PAGE_RW)?
+ ((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
+ bat->word[0] = virt | wimgxpp | 4; /* Ks=0, Ku=1 */
+ bat->word[1] = phys | bl | 0x40; /* V=1 */
+ }
+
+ bat_addrs[index].start = virt;
+ bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
+ bat_addrs[index].phys = phys;
+}
+
+/*
+ * Initialize the hash table and patch the instructions in hashtable.S.
+ */
+void __init MMU_init_hw(void)
+{
+ unsigned int hmask, mb, mb2;
+ unsigned int n_hpteg, lg_n_hpteg;
+
+ extern unsigned int hash_page_patch_A[];
+ extern unsigned int hash_page_patch_B[], hash_page_patch_C[];
+ extern unsigned int hash_page[];
+ extern unsigned int flush_hash_patch_A[], flush_hash_patch_B[];
+
+ if (!cpu_has_feature(CPU_FTR_HPTE_TABLE)) {
+ /*
+ * Put a blr (procedure return) instruction at the
+ * start of hash_page, since we can still get DSI
+ * exceptions on a 603.
+ */
+ hash_page[0] = 0x4e800020;
+ flush_icache_range((unsigned long) &hash_page[0],
+ (unsigned long) &hash_page[1]);
+ return;
+ }
+
+ if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
+
+#ifdef CONFIG_PPC64BRIDGE
+#define LG_HPTEG_SIZE 7 /* 128 bytes per HPTEG */
+#define SDR1_LOW_BITS (lg_n_hpteg - 11)
+#define MIN_N_HPTEG 2048 /* min 256kB hash table */
+#else
+#define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */
+#define SDR1_LOW_BITS ((n_hpteg - 1) >> 10)
+#define MIN_N_HPTEG 1024 /* min 64kB hash table */
+#endif
+
+#ifdef CONFIG_POWER4
+ /* The hash table has already been allocated and initialized
+ in prom.c */
+ n_hpteg = Hash_size >> LG_HPTEG_SIZE;
+ lg_n_hpteg = __ilog2(n_hpteg);
+
+ /* Remove the hash table from the available memory */
+ if (Hash)
+ reserve_phys_mem(__pa(Hash), Hash_size);
+
+#else /* CONFIG_POWER4 */
+ /*
+ * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
+ * This is less than the recommended amount, but then
+ * Linux ain't AIX.
+ */
+ n_hpteg = total_memory / (PAGE_SIZE * 8);
+ if (n_hpteg < MIN_N_HPTEG)
+ n_hpteg = MIN_N_HPTEG;
+ lg_n_hpteg = __ilog2(n_hpteg);
+ if (n_hpteg & (n_hpteg - 1)) {
+ ++lg_n_hpteg; /* round up if not power of 2 */
+ n_hpteg = 1 << lg_n_hpteg;
+ }
+ Hash_size = n_hpteg << LG_HPTEG_SIZE;
+
+ /*
+ * Find some memory for the hash table.
+ */
+ if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
+ Hash = mem_pieces_find(Hash_size, Hash_size);
+ cacheable_memzero(Hash, Hash_size);
+ _SDR1 = __pa(Hash) | SDR1_LOW_BITS;
+#endif /* CONFIG_POWER4 */
+
+ Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
+
+ printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
+ total_memory >> 20, Hash_size >> 10, Hash);
+
+
+ /*
+ * Patch up the instructions in hashtable.S:create_hpte
+ */
+ if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
+ Hash_mask = n_hpteg - 1;
+ hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
+ mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
+ if (lg_n_hpteg > 16)
+ mb2 = 16 - LG_HPTEG_SIZE;
+
+ hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff)
+ | ((unsigned int)(Hash) >> 16);
+ hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | (mb << 6);
+ hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | (mb2 << 6);
+ hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | hmask;
+ hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | hmask;
+
+ /*
+ * Ensure that the locations we've patched have been written
+ * out from the data cache and invalidated in the instruction
+ * cache, on those machines with split caches.
+ */
+ flush_icache_range((unsigned long) &hash_page_patch_A[0],
+ (unsigned long) &hash_page_patch_C[1]);
+
+ /*
+ * Patch up the instructions in hashtable.S:flush_hash_page
+ */
+ flush_hash_patch_A[0] = (flush_hash_patch_A[0] & ~0xffff)
+ | ((unsigned int)(Hash) >> 16);
+ flush_hash_patch_A[1] = (flush_hash_patch_A[1] & ~0x7c0) | (mb << 6);
+ flush_hash_patch_A[2] = (flush_hash_patch_A[2] & ~0x7c0) | (mb2 << 6);
+ flush_hash_patch_B[0] = (flush_hash_patch_B[0] & ~0xffff) | hmask;
+ flush_icache_range((unsigned long) &flush_hash_patch_A[0],
+ (unsigned long) &flush_hash_patch_B[1]);
+
+ if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
+}
diff --git a/arch/powerpc/mm/tlb.c b/arch/powerpc/mm/tlb.c
new file mode 100644
index 0000000..6c3dc3c
--- /dev/null
+++ b/arch/powerpc/mm/tlb.c
@@ -0,0 +1,183 @@
+/*
+ * This file contains the routines for TLB flushing.
+ * On machines where the MMU uses a hash table to store virtual to
+ * physical translations, these routines flush entries from the
+ * hash table also.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <asm/tlbflush.h>
+#include <asm/tlb.h>
+
+#include "mmu_decl.h"
+
+/*
+ * Called when unmapping pages to flush entries from the TLB/hash table.
+ */
+void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
+{
+ unsigned long ptephys;
+
+ if (Hash != 0) {
+ ptephys = __pa(ptep) & PAGE_MASK;
+ flush_hash_pages(mm->context, addr, ptephys, 1);
+ }
+}
+
+/*
+ * Called by ptep_set_access_flags, must flush on CPUs for which the
+ * DSI handler can't just "fixup" the TLB on a write fault
+ */
+void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr)
+{
+ if (Hash != 0)
+ return;
+ _tlbie(addr);
+}
+
+/*
+ * Called at the end of a mmu_gather operation to make sure the
+ * TLB flush is completely done.
+ */
+void tlb_flush(struct mmu_gather *tlb)
+{
+ if (Hash == 0) {
+ /*
+ * 603 needs to flush the whole TLB here since
+ * it doesn't use a hash table.
+ */
+ _tlbia();
+ }
+}
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes kernel pages
+ *
+ * since the hardware hash table functions as an extension of the
+ * tlb as far as the linux tables are concerned, flush it too.
+ * -- Cort
+ */
+
+/*
+ * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
+ * the cache operations on the bus. Hence we need to use an IPI
+ * to get the other CPU(s) to invalidate their TLBs.
+ */
+#ifdef CONFIG_SMP_750
+#define FINISH_FLUSH smp_send_tlb_invalidate(0)
+#else
+#define FINISH_FLUSH do { } while (0)
+#endif
+
+static void flush_range(struct mm_struct *mm, unsigned long start,
+ unsigned long end)
+{
+ pmd_t *pmd;
+ unsigned long pmd_end;
+ int count;
+ unsigned int ctx = mm->context;
+
+ if (Hash == 0) {
+ _tlbia();
+ return;
+ }
+ start &= PAGE_MASK;
+ if (start >= end)
+ return;
+ end = (end - 1) | ~PAGE_MASK;
+ pmd = pmd_offset(pgd_offset(mm, start), start);
+ for (;;) {
+ pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
+ if (pmd_end > end)
+ pmd_end = end;
+ if (!pmd_none(*pmd)) {
+ count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
+ flush_hash_pages(ctx, start, pmd_val(*pmd), count);
+ }
+ if (pmd_end == end)
+ break;
+ start = pmd_end + 1;
+ ++pmd;
+ }
+}
+
+/*
+ * Flush kernel TLB entries in the given range
+ */
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ flush_range(&init_mm, start, end);
+ FINISH_FLUSH;
+}
+
+/*
+ * Flush all the (user) entries for the address space described by mm.
+ */
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ struct vm_area_struct *mp;
+
+ if (Hash == 0) {
+ _tlbia();
+ return;
+ }
+
+ for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
+ flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
+ FINISH_FLUSH;
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+ struct mm_struct *mm;
+ pmd_t *pmd;
+
+ if (Hash == 0) {
+ _tlbie(vmaddr);
+ return;
+ }
+ mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
+ pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
+ if (!pmd_none(*pmd))
+ flush_hash_pages(mm->context, vmaddr, pmd_val(*pmd), 1);
+ FINISH_FLUSH;
+}
+
+/*
+ * For each address in the range, find the pte for the address
+ * and check _PAGE_HASHPTE bit; if it is set, find and destroy
+ * the corresponding HPTE.
+ */
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ flush_range(vma->vm_mm, start, end);
+ FINISH_FLUSH;
+}
diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig
new file mode 100644
index 0000000..ed39d6a
--- /dev/null
+++ b/arch/powerpc/platforms/4xx/Kconfig
@@ -0,0 +1,280 @@
+config 4xx
+ bool
+ depends on 40x || 44x
+ default y
+
+config WANT_EARLY_SERIAL
+ bool
+ select SERIAL_8250
+ default n
+
+menu "AMCC 4xx options"
+ depends on 4xx
+
+choice
+ prompt "Machine Type"
+ depends on 40x
+ default WALNUT
+
+config BUBINGA
+ bool "Bubinga"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the IBM 405EP evaluation board.
+
+config CPCI405
+ bool "CPCI405"
+ help
+ This option enables support for the CPCI405 board.
+
+config EP405
+ bool "EP405/EP405PC"
+ help
+ This option enables support for the EP405/EP405PC boards.
+
+config REDWOOD_5
+ bool "Redwood-5"
+ help
+ This option enables support for the IBM STB04 evaluation board.
+
+config REDWOOD_6
+ bool "Redwood-6"
+ help
+ This option enables support for the IBM STBx25xx evaluation board.
+
+config SYCAMORE
+ bool "Sycamore"
+ help
+ This option enables support for the IBM PPC405GPr evaluation board.
+
+config WALNUT
+ bool "Walnut"
+ help
+ This option enables support for the IBM PPC405GP evaluation board.
+
+config XILINX_ML300
+ bool "Xilinx-ML300"
+ help
+ This option enables support for the Xilinx ML300 evaluation board.
+
+endchoice
+
+choice
+ prompt "Machine Type"
+ depends on 44x
+ default EBONY
+
+config BAMBOO
+ bool "Bamboo"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the IBM PPC440EP evaluation board.
+
+config EBONY
+ bool "Ebony"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the IBM PPC440GP evaluation board.
+
+config LUAN
+ bool "Luan"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the IBM PPC440SP evaluation board.
+
+config OCOTEA
+ bool "Ocotea"
+ select WANT_EARLY_SERIAL
+ help
+ This option enables support for the IBM PPC440GX evaluation board.
+
+endchoice
+
+config EP405PC
+ bool "EP405PC Support"
+ depends on EP405
+
+
+# It's often necessary to know the specific 4xx processor type.
+# Fortunately, it is impled (so far) from the board type, so we
+# don't need to ask more redundant questions.
+config NP405H
+ bool
+ depends on ASH
+ default y
+
+config 440EP
+ bool
+ depends on BAMBOO
+ select PPC_FPU
+ default y
+
+config 440GP
+ bool
+ depends on EBONY
+ default y
+
+config 440GX
+ bool
+ depends on OCOTEA
+ default y
+
+config 440SP
+ bool
+ depends on LUAN
+ default y
+
+config 440
+ bool
+ depends on 440GP || 440SP || 440EP
+ default y
+
+config 440A
+ bool
+ depends on 440GX
+ default y
+
+config IBM440EP_ERR42
+ bool
+ depends on 440EP
+ default y
+
+# All 405-based cores up until the 405GPR and 405EP have this errata.
+config IBM405_ERR77
+ bool
+ depends on 40x && !403GCX && !405GPR && !405EP
+ default y
+
+# All 40x-based cores, up until the 405GPR and 405EP have this errata.
+config IBM405_ERR51
+ bool
+ depends on 40x && !405GPR && !405EP
+ default y
+
+config BOOKE
+ bool
+ depends on 44x
+ default y
+
+config IBM_OCP
+ bool
+ depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ default y
+
+config XILINX_OCP
+ bool
+ depends on XILINX_ML300
+ default y
+
+config IBM_EMAC4
+ bool
+ depends on 440GX || 440SP
+ default y
+
+config BIOS_FIXUP
+ bool
+ depends on BUBINGA || EP405 || SYCAMORE || WALNUT
+ default y
+
+# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
+config 403GCX
+ bool
+ depends OAK
+ default y
+
+config 405EP
+ bool
+ depends on BUBINGA
+ default y
+
+config 405GP
+ bool
+ depends on CPCI405 || EP405 || WALNUT
+ default y
+
+config 405GPR
+ bool
+ depends on SYCAMORE
+ default y
+
+config VIRTEX_II_PRO
+ bool
+ depends on XILINX_ML300
+ default y
+
+config STB03xxx
+ bool
+ depends on REDWOOD_5 || REDWOOD_6
+ default y
+
+config EMBEDDEDBOOT
+ bool
+ depends on EP405 || XILINX_ML300
+ default y
+
+config IBM_OPENBIOS
+ bool
+ depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+ default y
+
+config PPC4xx_DMA
+ bool "PPC4xx DMA controller support"
+ depends on 4xx
+
+config PPC4xx_EDMA
+ bool
+ depends on !STB03xxx && PPC4xx_DMA
+ default y
+
+config PPC_GEN550
+ bool
+ depends on 4xx
+ default y
+
+choice
+ prompt "TTYS0 device and default console"
+ depends on 40x
+ default UART0_TTYS0
+
+config UART0_TTYS0
+ bool "UART0"
+
+config UART0_TTYS1
+ bool "UART1"
+
+endchoice
+
+config SERIAL_SICC
+ bool "SICC Serial port support"
+ depends on STB03xxx
+
+config UART1_DFLT_CONSOLE
+ bool
+ depends on SERIAL_SICC && UART0_TTYS1
+ default y
+
+config SERIAL_SICC_CONSOLE
+ bool
+ depends on SERIAL_SICC && UART0_TTYS1
+ default y
+endmenu
+
+
+menu "IBM 40x options"
+ depends on 40x
+
+config SERIAL_SICC
+ bool "SICC Serial port"
+ depends on STB03xxx
+
+config UART1_DFLT_CONSOLE
+ bool
+ depends on SERIAL_SICC && UART0_TTYS1
+ default y
+
+config SERIAL_SICC_CONSOLE
+ bool
+ depends on SERIAL_SICC && UART0_TTYS1
+ default y
+
+endmenu
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
new file mode 100644
index 0000000..c5bc282
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -0,0 +1,86 @@
+config 85xx
+ bool
+ depends on E500
+ default y
+
+config PPC_INDIRECT_PCI_BE
+ bool
+ depends on 85xx
+ default y
+
+menu "Freescale 85xx options"
+ depends on E500
+
+choice
+ prompt "Machine Type"
+ depends on 85xx
+ default MPC8540_ADS
+
+config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ help
+ This option enables support for the MPC 8540 ADS evaluation board.
+
+config MPC8548_CDS
+ bool "Freescale MPC8548 CDS"
+ help
+ This option enablese support for the MPC8548 CDS evaluation board.
+
+config MPC8555_CDS
+ bool "Freescale MPC8555 CDS"
+ help
+ This option enablese support for the MPC8555 CDS evaluation board.
+
+config MPC8560_ADS
+ bool "Freescale MPC8560 ADS"
+ help
+ This option enables support for the MPC 8560 ADS evaluation board.
+
+config SBC8560
+ bool "WindRiver PowerQUICC III SBC8560"
+ help
+ This option enables support for the WindRiver PowerQUICC III
+ SBC8560 board.
+
+config STX_GP3
+ bool "Silicon Turnkey Express GP3"
+ help
+ This option enables support for the Silicon Turnkey Express GP3
+ board.
+
+endchoice
+
+# It's often necessary to know the specific 85xx processor type.
+# Fortunately, it is implied (so far) from the board type, so we
+# don't need to ask more redundant questions.
+config MPC8540
+ bool
+ depends on MPC8540_ADS
+ default y
+
+config MPC8548
+ bool
+ depends on MPC8548_CDS
+ default y
+
+config MPC8555
+ bool
+ depends on MPC8555_CDS
+ default y
+
+config MPC8560
+ bool
+ depends on SBC8560 || MPC8560_ADS || STX_GP3
+ default y
+
+config 85xx_PCI2
+ bool "Supprt for 2nd PCI host controller"
+ depends on MPC8555_CDS
+ default y
+
+config PPC_GEN550
+ bool
+ depends on MPC8540 || SBC8560 || MPC8555
+ default y
+
+endmenu
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
new file mode 100644
index 0000000..c8c0ba3
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -0,0 +1,352 @@
+config FADS
+ bool
+
+choice
+ prompt "8xx Machine Type"
+ depends on 8xx
+ default RPXLITE
+
+config RPXLITE
+ bool "RPX-Lite"
+ ---help---
+ Single-board computers based around the PowerPC MPC8xx chips and
+ intended for embedded applications. The following types are
+ supported:
+
+ RPX-Lite:
+ Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
+
+ RPX-Classic:
+ Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
+ the MPC 860
+
+ BSE-IP:
+ Bright Star Engineering ip-Engine.
+
+ TQM823L:
+ TQM850L:
+ TQM855L:
+ TQM860L:
+ MPC8xx based family of mini modules, half credit card size,
+ up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
+ 2 x CAN bus interface, ...
+ Manufacturer: TQ Components, www.tq-group.de
+ Date of Release: October (?) 1999
+ End of Life: not yet :-)
+ URL:
+ - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
+ - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
+ - images: <http://www.denx.de/embedded-ppc-en.html>
+
+ FPS850L:
+ FingerPrint Sensor System (based on TQM850L)
+ Manufacturer: IKENDI AG, <http://www.ikendi.com/>
+ Date of Release: November 1999
+ End of life: end 2000 ?
+ URL: see TQM850L
+
+ IVMS8:
+ MPC860 based board used in the "Integrated Voice Mail System",
+ Small Version (8 voice channels)
+ Manufacturer: Speech Design, <http://www.speech-design.de/>
+ Date of Release: December 2000 (?)
+ End of life: -
+ URL: <http://www.speech-design.de/>
+
+ IVML24:
+ MPC860 based board used in the "Integrated Voice Mail System",
+ Large Version (24 voice channels)
+ Manufacturer: Speech Design, <http://www.speech-design.de/>
+ Date of Release: March 2001 (?)
+ End of life: -
+ URL: <http://www.speech-design.de/>
+
+ HERMES:
+ Hermes-Pro ISDN/LAN router with integrated 8 x hub
+ Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
+ <http://www.multidata.de/>
+ Date of Release: 2000 (?)
+ End of life: -
+ URL: <http://www.multidata.de/english/products/hpro.htm>
+
+ IP860:
+ VMEBus IP (Industry Pack) carrier board with MPC860
+ Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
+ Date of Release: ?
+ End of life: -
+ URL: <http://www.microsys.de/html/ip860.html>
+
+ PCU_E:
+ PCU = Peripheral Controller Unit, Extended
+ Manufacturer: Siemens AG, ICN (Information and Communication Networks)
+ <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
+ Date of Release: April 2001
+ End of life: August 2001
+ URL: n. a.
+
+config RPXCLASSIC
+ bool "RPX-Classic"
+ help
+ The RPX-Classic is a single-board computer based on the Motorola
+ MPC860. It features 16MB of DRAM and a variable amount of flash,
+ I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
+ LEDs. Variants with Ethernet ports exist. Say Y here to support it
+ directly.
+
+config BSEIP
+ bool "BSE-IP"
+ help
+ Say Y here to support the Bright Star Engineering ipEngine SBC.
+ This is a credit-card-sized device featuring a MPC823 processor,
+ 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
+ controller, and two RS232 ports.
+
+config MPC8XXFADS
+ bool "FADS"
+ select FADS
+
+config MPC86XADS
+ bool "MPC86XADS"
+ help
+ MPC86x Application Development System by Freescale Semiconductor.
+ The MPC86xADS is meant to serve as a platform for s/w and h/w
+ development around the MPC86X processor families.
+ select FADS
+
+config MPC885ADS
+ bool "MPC885ADS"
+ help
+ Freescale Semiconductor MPC885 Application Development System (ADS).
+ Also known as DUET.
+ The MPC885ADS is meant to serve as a platform for s/w and h/w
+ development around the MPC885 processor family.
+
+config TQM823L
+ bool "TQM823L"
+ help
+ Say Y here to support the TQM823L, one of an MPC8xx-based family of
+ mini SBCs (half credit-card size) from TQ Components first released
+ in late 1999. Technical references are at
+ <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+ <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+ <http://www.denx.de/embedded-ppc-en.html>.
+
+config TQM850L
+ bool "TQM850L"
+ help
+ Say Y here to support the TQM850L, one of an MPC8xx-based family of
+ mini SBCs (half credit-card size) from TQ Components first released
+ in late 1999. Technical references are at
+ <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+ <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+ <http://www.denx.de/embedded-ppc-en.html>.
+
+config TQM855L
+ bool "TQM855L"
+ help
+ Say Y here to support the TQM855L, one of an MPC8xx-based family of
+ mini SBCs (half credit-card size) from TQ Components first released
+ in late 1999. Technical references are at
+ <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+ <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+ <http://www.denx.de/embedded-ppc-en.html>.
+
+config TQM860L
+ bool "TQM860L"
+ help
+ Say Y here to support the TQM860L, one of an MPC8xx-based family of
+ mini SBCs (half credit-card size) from TQ Components first released
+ in late 1999. Technical references are at
+ <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
+ <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
+ <http://www.denx.de/embedded-ppc-en.html>.
+
+config FPS850L
+ bool "FPS850L"
+
+config IVMS8
+ bool "IVMS8"
+ help
+ Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
+ from Speech Design, released March 2001. The manufacturer's website
+ is at <http://www.speech-design.de/>.
+
+config IVML24
+ bool "IVML24"
+ help
+ Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
+ from Speech Design, released March 2001. The manufacturer's website
+ is at <http://www.speech-design.de/>.
+
+config HERMES_PRO
+ bool "HERMES"
+
+config IP860
+ bool "IP860"
+
+config LWMON
+ bool "LWMON"
+
+config PCU_E
+ bool "PCU_E"
+
+config CCM
+ bool "CCM"
+
+config LANTEC
+ bool "LANTEC"
+
+config MBX
+ bool "MBX"
+ help
+ MBX is a line of Motorola single-board computer based around the
+ MPC821 and MPC860 processors, and intended for embedded-controller
+ applications. Say Y here to support these boards directly.
+
+config WINCEPT
+ bool "WinCept"
+ help
+ The Wincept 100/110 is a Motorola single-board computer based on the
+ MPC821 PowerPC, introduced in 1998 and designed to be used in
+ thin-client machines. Say Y to support it directly.
+
+endchoice
+
+#
+# MPC8xx Communication options
+#
+
+menu "MPC8xx CPM Options"
+ depends on 8xx
+
+config SCC_ENET
+ bool "CPM SCC Ethernet"
+ depends on NET_ETHERNET
+ help
+ Enable Ethernet support via the Motorola MPC8xx serial
+ communications controller.
+
+choice
+ prompt "SCC used for Ethernet"
+ depends on SCC_ENET
+ default SCC1_ENET
+
+config SCC1_ENET
+ bool "SCC1"
+ help
+ Use MPC8xx serial communications controller 1 to drive Ethernet
+ (default).
+
+config SCC2_ENET
+ bool "SCC2"
+ help
+ Use MPC8xx serial communications controller 2 to drive Ethernet.
+
+config SCC3_ENET
+ bool "SCC3"
+ help
+ Use MPC8xx serial communications controller 3 to drive Ethernet.
+
+endchoice
+
+config FEC_ENET
+ bool "860T FEC Ethernet"
+ depends on NET_ETHERNET
+ help
+ Enable Ethernet support via the Fast Ethernet Controller (FCC) on
+ the Motorola MPC8260.
+
+config USE_MDIO
+ bool "Use MDIO for PHY configuration"
+ depends on FEC_ENET
+ help
+ On some boards the hardware configuration of the ethernet PHY can be
+ used without any software interaction over the MDIO interface, so
+ all MII code can be omitted. Say N here if unsure or if you don't
+ need link status reports.
+
+config FEC_AM79C874
+ bool "Support AMD79C874 PHY"
+ depends on USE_MDIO
+
+config FEC_LXT970
+ bool "Support LXT970 PHY"
+ depends on USE_MDIO
+
+config FEC_LXT971
+ bool "Support LXT971 PHY"
+ depends on USE_MDIO
+
+config FEC_QS6612
+ bool "Support QS6612 PHY"
+ depends on USE_MDIO
+
+config ENET_BIG_BUFFERS
+ bool "Use Big CPM Ethernet Buffers"
+ depends on SCC_ENET || FEC_ENET
+ help
+ Allocate large buffers for MPC8xx Ethernet. Increases throughput
+ and decreases the likelihood of dropped packets, but costs memory.
+
+config HTDMSOUND
+ bool "Embedded Planet HIOX Audio"
+ depends on SOUND=y
+
+# This doesn't really belong here, but it is convenient to ask
+# 8xx specific questions.
+comment "Generic MPC8xx Options"
+
+config 8xx_COPYBACK
+ bool "Copy-Back Data Cache (else Writethrough)"
+ help
+ Saying Y here will cause the cache on an MPC8xx processor to be used
+ in Copy-Back mode. If you say N here, it is used in Writethrough
+ mode.
+
+ If in doubt, say Y here.
+
+config 8xx_CPU6
+ bool "CPU6 Silicon Errata (860 Pre Rev. C)"
+ help
+ MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
+ require workarounds for Linux (and most other OSes to work). If you
+ get a BUG() very early in boot, this might fix the problem. For
+ more details read the document entitled "MPC860 Family Device Errata
+ Reference" on Motorola's website. This option also incurs a
+ performance hit.
+
+ If in doubt, say N here.
+
+choice
+ prompt "Microcode patch selection"
+ default NO_UCODE_PATCH
+ help
+ Help not implemented yet, coming soon.
+
+config NO_UCODE_PATCH
+ bool "None"
+
+config USB_SOF_UCODE_PATCH
+ bool "USB SOF patch"
+ help
+ Help not implemented yet, coming soon.
+
+config I2C_SPI_UCODE_PATCH
+ bool "I2C/SPI relocation patch"
+ help
+ Help not implemented yet, coming soon.
+
+config I2C_SPI_SMC1_UCODE_PATCH
+ bool "I2C/SPI/SMC1 relocation patch"
+ help
+ Help not implemented yet, coming soon.
+
+endchoice
+
+config UCODE_PATCH
+ bool
+ default y
+ depends on !NO_UCODE_PATCH
+
+endmenu
+
diff --git a/arch/powerpc/platforms/apus/Kconfig b/arch/powerpc/platforms/apus/Kconfig
new file mode 100644
index 0000000..6bde3bf
--- /dev/null
+++ b/arch/powerpc/platforms/apus/Kconfig
@@ -0,0 +1,130 @@
+
+config AMIGA
+ bool
+ depends on APUS
+ default y
+ help
+ This option enables support for the Amiga series of computers.
+
+config ZORRO
+ bool
+ depends on APUS
+ default y
+ help
+ This enables support for the Zorro bus in the Amiga. If you have
+ expansion cards in your Amiga that conform to the Amiga
+ AutoConfig(tm) specification, say Y, otherwise N. Note that even
+ expansion cards that do not fit in the Zorro slots but fit in e.g.
+ the CPU slot may fall in this category, so you have to say Y to let
+ Linux use these.
+
+config ABSTRACT_CONSOLE
+ bool
+ depends on APUS
+ default y
+
+config APUS_FAST_EXCEPT
+ bool
+ depends on APUS
+ default y
+
+config AMIGA_PCMCIA
+ bool "Amiga 1200/600 PCMCIA support"
+ depends on APUS && EXPERIMENTAL
+ help
+ Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+ 600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+config AMIGA_BUILTIN_SERIAL
+ tristate "Amiga builtin serial support"
+ depends on APUS
+ help
+ If you want to use your Amiga's built-in serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config GVPIOEXT
+ tristate "GVP IO-Extender support"
+ depends on APUS
+ help
+ If you want to use a GVP IO-Extender serial card in Linux, say Y.
+ Otherwise, say N.
+
+config GVPIOEXT_LP
+ tristate "GVP IO-Extender parallel printer support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable driving a printer from the parallel port on your
+ GVP IO-Extender card, N otherwise.
+
+config GVPIOEXT_PLIP
+ tristate "GVP IO-Extender PLIP support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable doing IP over the parallel port on your GVP
+ IO-Extender card, N otherwise.
+
+config MULTIFACE_III_TTY
+ tristate "Multiface Card III serial support"
+ depends on APUS
+ help
+ If you want to use a Multiface III card's serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config A2232
+ tristate "Commodore A2232 serial support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && APUS
+ ---help---
+ This option supports the 2232 7-port serial card shipped with the
+ Amiga 2000 and other Zorro-bus machines, dating from 1989. At
+ a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
+ each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
+ ports were connected with 8 pin DIN connectors on the card bracket,
+ for which 8 pin to DB25 adapters were supplied. The card also had
+ jumpers internally to toggle various pinning configurations.
+
+ This driver can be built as a module; but then "generic_serial"
+ will also be built as a module. This has to be loaded before
+ "ser_a2232". If you want to do this, answer M here.
+
+config WHIPPET_SERIAL
+ tristate "Hisoft Whippet PCMCIA serial support"
+ depends on AMIGA_PCMCIA
+ help
+ HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
+ is no listing for the Whippet in their Amiga section.
+
+config APNE
+ tristate "PCMCIA NE2000 support"
+ depends on AMIGA_PCMCIA
+ help
+ If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
+ say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called apne.
+
+config SERIAL_CONSOLE
+ bool "Support for serial port console"
+ depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
+
+config HEARTBEAT
+ bool "Use power LED as a heartbeat"
+ depends on APUS
+ help
+ Use the power-on LED on your machine as a load meter. The exact
+ behavior is platform-dependent, but normally the flash frequency is
+ a hyperbolic function of the 5-minute load average.
+
+config PROC_HARDWARE
+ bool "/proc/hardware support"
+ depends on APUS
+
+source "drivers/zorro/Kconfig"
+
+config PCI_PERMEDIA
+ bool "PCI for Permedia2"
+ depends on !4xx && !8xx && APUS
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
new file mode 100644
index 0000000..4f35514
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -0,0 +1,313 @@
+choice
+ prompt "Machine Type"
+ depends on EMBEDDED6xx
+
+config APUS
+ bool "Amiga-APUS"
+ depends on BROKEN
+ help
+ Select APUS if configuring for a PowerUP Amiga.
+ More information is available at:
+ <http://linux-apus.sourceforge.net/>.
+
+config KATANA
+ bool "Artesyn-Katana"
+ help
+ Select KATANA if configuring an Artesyn KATANA 750i or 3750
+ cPCI board.
+
+config WILLOW
+ bool "Cogent-Willow"
+
+config CPCI690
+ bool "Force-CPCI690"
+ help
+ Select CPCI690 if configuring a Force CPCI690 cPCI board.
+
+config POWERPMC250
+ bool "Force-PowerPMC250"
+
+config CHESTNUT
+ bool "IBM 750FX Eval board or 750GX Eval board"
+ help
+ Select CHESTNUT if configuring an IBM 750FX Eval Board or a
+ IBM 750GX Eval board.
+
+config SPRUCE
+ bool "IBM-Spruce"
+
+config HDPU
+ bool "Sky-HDPU"
+ help
+ Select HDPU if configuring a Sky Computers Compute Blade.
+
+config HDPU_FEATURES
+ depends HDPU
+ tristate "HDPU-Features"
+ help
+ Select to enable HDPU enhanced features.
+
+config EV64260
+ bool "Marvell-EV64260BP"
+ help
+ Select EV64260 if configuring a Marvell (formerly Galileo)
+ EV64260BP Evaluation platform.
+
+config LOPEC
+ bool "Motorola-LoPEC"
+
+config MVME5100
+ bool "Motorola-MVME5100"
+
+config PPLUS
+ bool "Motorola-PowerPlus"
+
+config PRPMC750
+ bool "Motorola-PrPMC750"
+
+config PRPMC800
+ bool "Motorola-PrPMC800"
+
+config SANDPOINT
+ bool "Motorola-Sandpoint"
+ help
+ Select SANDPOINT if configuring for a Motorola Sandpoint X3
+ (any flavor).
+
+config RADSTONE_PPC7D
+ bool "Radstone Technology PPC7D board"
+
+config PAL4
+ bool "SBS-Palomar4"
+
+config GEMINI
+ bool "Synergy-Gemini"
+ depends on BROKEN
+ help
+ Select Gemini if configuring for a Synergy Microsystems' Gemini
+ series Single Board Computer. More information is available at:
+ <http://www.synergymicro.com/PressRel/97_10_15.html>.
+
+config EST8260
+ bool "EST8260"
+ ---help---
+ The EST8260 is a single-board computer manufactured by Wind River
+ Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
+ the MPC8260. Wind River Systems has a website at
+ <http://www.windriver.com/>, but the EST8260 cannot be found on it
+ and has probably been discontinued or rebadged.
+
+config SBC82xx
+ bool "SBC82xx"
+ ---help---
+ SBC PowerQUICC II, single-board computer with MPC82xx CPU
+ Manufacturer: Wind River Systems, Inc.
+ Date of Release: May 2003
+ End of Life: -
+ URL: <http://www.windriver.com/>
+
+config SBS8260
+ bool "SBS8260"
+
+config RPX8260
+ bool "RPXSUPER"
+
+config TQM8260
+ bool "TQM8260"
+ ---help---
+ MPC8260 based module, little larger than credit card,
+ up to 128 MB global + 64 MB local RAM, 32 MB Flash,
+ 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
+ 2 x serial ports, ...
+ Manufacturer: TQ Components, www.tq-group.de
+ Date of Release: June 2001
+ End of Life: not yet :-)
+ URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
+
+config ADS8272
+ bool "ADS8272"
+
+config PQ2FADS
+ bool "Freescale-PQ2FADS"
+ help
+ Select PQ2FADS if you wish to configure for a Freescale
+ PQ2FADS board (-VR or -ZU).
+
+config LITE5200
+ bool "Freescale LITE5200 / (IceCube)"
+ select PPC_MPC52xx
+ help
+ Support for the LITE5200 dev board for the MPC5200 from Freescale.
+ This is for the LITE5200 version 2.0 board. Don't know if it changes
+ much but it's only been tested on this board version. I think this
+ board is also known as IceCube.
+
+config MPC834x_SYS
+ bool "Freescale MPC834x SYS"
+ help
+ This option enables support for the MPC 834x SYS evaluation board.
+
+ Be aware that PCI buses can only function when SYS board is plugged
+ into the PIB (Platform IO Board) board from Freescale which provide
+ 3 PCI slots. The PIBs PCI initialization is the bootloader's
+ responsiblilty.
+
+config EV64360
+ bool "Marvell-EV64360BP"
+ help
+ Select EV64360 if configuring a Marvell EV64360BP Evaluation
+ platform.
+endchoice
+
+config PQ2ADS
+ bool
+ depends on ADS8272
+ default y
+
+config TQM8xxL
+ bool
+ depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
+ default y
+
+config PPC_MPC52xx
+ bool
+
+config 8260
+ bool "CPM2 Support" if WILLOW
+ depends on 6xx
+ default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
+ help
+ The MPC8260 is a typical embedded CPU made by Motorola. Selecting
+ this option means that you wish to build a kernel for a machine with
+ an 8260 class CPU.
+
+config 8272
+ bool
+ depends on 6xx
+ default y if ADS8272
+ select 8260
+ help
+ The MPC8272 CPM has a different internal dpram setup than other CPM2
+ devices
+
+config 83xx
+ bool
+ default y if MPC834x_SYS
+
+config MPC834x
+ bool
+ default y if MPC834x_SYS
+
+config CPM2
+ bool
+ depends on 8260 || MPC8560 || MPC8555
+ default y
+ help
+ The CPM2 (Communications Processor Module) is a coprocessor on
+ embedded CPUs made by Motorola. Selecting this option means that
+ you wish to build a kernel for a machine with a CPM2 coprocessor
+ on it (826x, 827x, 8560).
+
+config PPC_GEN550
+ bool
+ depends on SANDPOINT || SPRUCE || PPLUS || \
+ PRPMC750 || PRPMC800 || LOPEC || \
+ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
+ 83xx
+ default y
+
+config FORCE
+ bool
+ depends on 6xx && POWERPMC250
+ default y
+
+config GT64260
+ bool
+ depends on EV64260 || CPCI690
+ default y
+
+config MV64360 # Really MV64360 & MV64460
+ bool
+ depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
+ default y
+
+config MV64X60
+ bool
+ depends on (GT64260 || MV64360)
+ default y
+
+menu "Set bridge options"
+ depends on MV64X60
+
+config NOT_COHERENT_CACHE
+ bool "Turn off Cache Coherency"
+ default n
+ help
+ Some 64x60 bridges lock up when trying to enforce cache coherency.
+ When this option is selected, cache coherency will be turned off.
+ Note that this can cause other problems (e.g., stale data being
+ speculatively loaded via a cached mapping). Use at your own risk.
+
+config MV64X60_BASE
+ hex "Set bridge base used by firmware"
+ default "0xf1000000"
+ help
+ A firmware can leave the base address of the bridge's registers at
+ a non-standard location. If so, set this value to reflect the
+ address of that non-standard location.
+
+config MV64X60_NEW_BASE
+ hex "Set bridge base used by kernel"
+ default "0xf1000000"
+ help
+ If the current base address of the bridge's registers is not where
+ you want it, set this value to the address that you want it moved to.
+
+endmenu
+
+config NONMONARCH_SUPPORT
+ bool "Enable Non-Monarch Support"
+ depends on PRPMC800
+
+config HARRIER
+ bool
+ depends on PRPMC800
+ default y
+
+config EPIC_SERIAL_MODE
+ bool
+ depends on 6xx && (LOPEC || SANDPOINT)
+ default y
+
+config MPC10X_BRIDGE
+ bool
+ depends on POWERPMC250 || LOPEC || SANDPOINT
+ default y
+
+config MPC10X_OPENPIC
+ bool
+ depends on POWERPMC250 || LOPEC || SANDPOINT
+ default y
+
+config MPC10X_STORE_GATHERING
+ bool "Enable MPC10x store gathering"
+ depends on MPC10X_BRIDGE
+
+config SANDPOINT_ENABLE_UART1
+ bool "Enable DUART mode on Sandpoint"
+ depends on SANDPOINT
+ help
+ If this option is enabled then the MPC824x processor will run
+ in DUART mode instead of UART mode.
+
+config HARRIER_STORE_GATHERING
+ bool "Enable Harrier store gathering"
+ depends on HARRIER
+
+config MVME5100_IPMC761_PRESENT
+ bool "MVME5100 configured with an IPMC761"
+ depends on MVME5100
+
+config SPRUCE_BAUD_33M
+ bool "Spruce baud clock support"
+ depends on SPRUCE
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
new file mode 100644
index 0000000..3d957a3
--- /dev/null
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -0,0 +1,31 @@
+
+menu "iSeries device drivers"
+ depends on PPC_ISERIES
+
+config VIOCONS
+ tristate "iSeries Virtual Console Support"
+
+config VIODASD
+ tristate "iSeries Virtual I/O disk support"
+ help
+ If you are running on an iSeries system and you want to use
+ virtual disks created and managed by OS/400, say Y.
+
+config VIOCD
+ tristate "iSeries Virtual I/O CD support"
+ help
+ If you are running Linux on an IBM iSeries system and you want to
+ read a CD drive owned by OS/400, say Y here.
+
+config VIOTAPE
+ tristate "iSeries Virtual Tape Support"
+ help
+ If you are running Linux on an iSeries system and you want Linux
+ to read and/or write a tape drive owned by OS/400, say Y here.
+
+endmenu
+
+config VIOPATH
+ bool
+ depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH
+ default y
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
new file mode 100644
index 0000000..37b7341
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_PPC_PMAC) += pmac_pic.o pmac_setup.o pmac_time.o \
+ pmac_feature.o pmac_pci.o pmac_sleep.o \
+ pmac_low_i2c.o pmac_cache.o
+obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o
+obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpufreq.o
+ifeq ($(CONFIG_PPC_PMAC),y)
+obj-$(CONFIG_NVRAM) += pmac_nvram.o
+obj-$(CONFIG_SMP) += pmac_smp.o
+endif
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
new file mode 100644
index 0000000..40e1c50
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -0,0 +1,31 @@
+#ifndef __PMAC_H__
+#define __PMAC_H__
+
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+/*
+ * Declaration for the various functions exported by the
+ * pmac_* files. Mostly for use by pmac_setup
+ */
+
+extern void pmac_get_boot_time(struct rtc_time *tm);
+extern void pmac_get_rtc_time(struct rtc_time *tm);
+extern int pmac_set_rtc_time(struct rtc_time *tm);
+extern void pmac_read_rtc_time(void);
+extern void pmac_calibrate_decr(void);
+
+extern void pmac_pcibios_fixup(void);
+extern void pmac_pci_init(void);
+extern void pmac_setup_pci_dma(void);
+extern void pmac_check_ht_link(void);
+
+extern void pmac_setup_smp(void);
+
+extern unsigned long pmac_ide_get_base(int index);
+extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
+ unsigned long data_port, unsigned long ctrl_port, int *irq);
+
+extern void pmac_nvram_init(void);
+
+#endif /* __PMAC_H__ */
diff --git a/arch/powerpc/platforms/powermac/pmac_backlight.c b/arch/powerpc/platforms/powermac/pmac_backlight.c
new file mode 100644
index 0000000..8be2f7d
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_backlight.c
@@ -0,0 +1,202 @@
+/*
+ * Miscellaneous procedures for dealing with the PowerMac hardware.
+ * Contains support for the backlight.
+ *
+ * Copyright (C) 2000 Benjamin Herrenschmidt
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/reboot.h>
+#include <linux/nvram.h>
+#include <linux/console.h>
+#include <asm/sections.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/nvram.h>
+#include <asm/backlight.h>
+
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+static struct backlight_controller *backlighter;
+static void* backlighter_data;
+static int backlight_autosave;
+static int backlight_level = BACKLIGHT_MAX;
+static int backlight_enabled = 1;
+static int backlight_req_level = -1;
+static int backlight_req_enable = -1;
+
+static void backlight_callback(void *);
+static DECLARE_WORK(backlight_work, backlight_callback, NULL);
+
+void register_backlight_controller(struct backlight_controller *ctrler,
+ void *data, char *type)
+{
+ struct device_node* bk_node;
+ char *prop;
+ int valid = 0;
+
+ /* There's already a matching controller, bail out */
+ if (backlighter != NULL)
+ return;
+
+ bk_node = find_devices("backlight");
+
+#ifdef CONFIG_ADB_PMU
+ /* Special case for the old PowerBook since I can't test on it */
+ backlight_autosave = machine_is_compatible("AAPL,3400/2400")
+ || machine_is_compatible("AAPL,3500");
+ if ((backlight_autosave
+ || machine_is_compatible("AAPL,PowerBook1998")
+ || machine_is_compatible("PowerBook1,1"))
+ && !strcmp(type, "pmu"))
+ valid = 1;
+#endif
+ if (bk_node) {
+ prop = get_property(bk_node, "backlight-control", NULL);
+ if (prop && !strncmp(prop, type, strlen(type)))
+ valid = 1;
+ }
+ if (!valid)
+ return;
+ backlighter = ctrler;
+ backlighter_data = data;
+
+ if (bk_node && !backlight_autosave)
+ prop = get_property(bk_node, "bklt", NULL);
+ else
+ prop = NULL;
+ if (prop) {
+ backlight_level = ((*prop)+1) >> 1;
+ if (backlight_level > BACKLIGHT_MAX)
+ backlight_level = BACKLIGHT_MAX;
+ }
+
+#ifdef CONFIG_ADB_PMU
+ if (backlight_autosave) {
+ struct adb_request req;
+ pmu_request(&req, NULL, 2, 0xd9, 0);
+ while (!req.complete)
+ pmu_poll();
+ backlight_level = req.reply[0] >> 4;
+ }
+#endif
+ acquire_console_sem();
+ if (!backlighter->set_enable(1, backlight_level, data))
+ backlight_enabled = 1;
+ release_console_sem();
+
+ printk(KERN_INFO "Registered \"%s\" backlight controller,"
+ "level: %d/15\n", type, backlight_level);
+}
+EXPORT_SYMBOL(register_backlight_controller);
+
+void unregister_backlight_controller(struct backlight_controller
+ *ctrler, void *data)
+{
+ /* We keep the current backlight level (for now) */
+ if (ctrler == backlighter && data == backlighter_data)
+ backlighter = NULL;
+}
+EXPORT_SYMBOL(unregister_backlight_controller);
+
+static int __set_backlight_enable(int enable)
+{
+ int rc;
+
+ if (!backlighter)
+ return -ENODEV;
+ acquire_console_sem();
+ rc = backlighter->set_enable(enable, backlight_level,
+ backlighter_data);
+ if (!rc)
+ backlight_enabled = enable;
+ release_console_sem();
+ return rc;
+}
+int set_backlight_enable(int enable)
+{
+ if (!backlighter)
+ return -ENODEV;
+ backlight_req_enable = enable;
+ schedule_work(&backlight_work);
+ return 0;
+}
+
+EXPORT_SYMBOL(set_backlight_enable);
+
+int get_backlight_enable(void)
+{
+ if (!backlighter)
+ return -ENODEV;
+ return backlight_enabled;
+}
+EXPORT_SYMBOL(get_backlight_enable);
+
+static int __set_backlight_level(int level)
+{
+ int rc = 0;
+
+ if (!backlighter)
+ return -ENODEV;
+ if (level < BACKLIGHT_MIN)
+ level = BACKLIGHT_OFF;
+ if (level > BACKLIGHT_MAX)
+ level = BACKLIGHT_MAX;
+ acquire_console_sem();
+ if (backlight_enabled)
+ rc = backlighter->set_level(level, backlighter_data);
+ if (!rc)
+ backlight_level = level;
+ release_console_sem();
+ if (!rc && !backlight_autosave) {
+ level <<=1;
+ if (level & 0x10)
+ level |= 0x01;
+ // -- todo: save to property "bklt"
+ }
+ return rc;
+}
+int set_backlight_level(int level)
+{
+ if (!backlighter)
+ return -ENODEV;
+ backlight_req_level = level;
+ schedule_work(&backlight_work);
+ return 0;
+}
+
+EXPORT_SYMBOL(set_backlight_level);
+
+int get_backlight_level(void)
+{
+ if (!backlighter)
+ return -ENODEV;
+ return backlight_level;
+}
+EXPORT_SYMBOL(get_backlight_level);
+
+static void backlight_callback(void *dummy)
+{
+ int level, enable;
+
+ do {
+ level = backlight_req_level;
+ enable = backlight_req_enable;
+ mb();
+
+ if (level >= 0)
+ __set_backlight_level(level);
+ if (enable >= 0)
+ __set_backlight_enable(enable);
+ } while(cmpxchg(&backlight_req_level, level, -1) != level ||
+ cmpxchg(&backlight_req_enable, enable, -1) != enable);
+}
diff --git a/arch/powerpc/platforms/powermac/pmac_cache.S b/arch/powerpc/platforms/powermac/pmac_cache.S
new file mode 100644
index 0000000..fb977de
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_cache.S
@@ -0,0 +1,359 @@
+/*
+ * This file contains low-level cache management functions
+ * used for sleep and CPU speed changes on Apple machines.
+ * (In fact the only thing that is Apple-specific is that we assume
+ * that we can read from ROM at physical address 0xfff00000.)
+ *
+ * Copyright (C) 2004 Paul Mackerras (paulus@samba.org) and
+ * Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+
+/*
+ * Flush and disable all data caches (dL1, L2, L3). This is used
+ * when going to sleep, when doing a PMU based cpufreq transition,
+ * or when "offlining" a CPU on SMP machines. This code is over
+ * paranoid, but I've had enough issues with various CPU revs and
+ * bugs that I decided it was worth beeing over cautious
+ */
+
+_GLOBAL(flush_disable_caches)
+#ifndef CONFIG_6xx
+ blr
+#else
+BEGIN_FTR_SECTION
+ b flush_disable_745x
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+BEGIN_FTR_SECTION
+ b flush_disable_75x
+END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
+ b __flush_disable_L1
+
+/* This is the code for G3 and 74[01]0 */
+flush_disable_75x:
+ mflr r10
+
+ /* Turn off EE and DR in MSR */
+ mfmsr r11
+ rlwinm r0,r11,0,~MSR_EE
+ rlwinm r0,r0,0,~MSR_DR
+ sync
+ mtmsr r0
+ isync
+
+ /* Stop DST streams */
+BEGIN_FTR_SECTION
+ DSSALL
+ sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+
+ /* Stop DPM */
+ mfspr r8,SPRN_HID0 /* Save SPRN_HID0 in r8 */
+ rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */
+ sync
+ mtspr SPRN_HID0,r4 /* Disable DPM */
+ sync
+
+ /* Disp-flush L1. We have a weird problem here that I never
+ * totally figured out. On 750FX, using the ROM for the flush
+ * results in a non-working flush. We use that workaround for
+ * now until I finally understand what's going on. --BenH
+ */
+
+ /* ROM base by default */
+ lis r4,0xfff0
+ mfpvr r3
+ srwi r3,r3,16
+ cmplwi cr0,r3,0x7000
+ bne+ 1f
+ /* RAM base on 750FX */
+ li r4,0
+1: li r4,0x4000
+ mtctr r4
+1: lwz r0,0(r4)
+ addi r4,r4,32
+ bdnz 1b
+ sync
+ isync
+
+ /* Disable / invalidate / enable L1 data */
+ mfspr r3,SPRN_HID0
+ rlwinm r3,r3,0,~(HID0_DCE | HID0_ICE)
+ mtspr SPRN_HID0,r3
+ sync
+ isync
+ ori r3,r3,(HID0_DCE|HID0_DCI|HID0_ICE|HID0_ICFI)
+ sync
+ isync
+ mtspr SPRN_HID0,r3
+ xori r3,r3,(HID0_DCI|HID0_ICFI)
+ mtspr SPRN_HID0,r3
+ sync
+
+ /* Get the current enable bit of the L2CR into r4 */
+ mfspr r5,SPRN_L2CR
+ /* Set to data-only (pre-745x bit) */
+ oris r3,r5,L2CR_L2DO@h
+ b 2f
+ /* When disabling L2, code must be in L1 */
+ .balign 32
+1: mtspr SPRN_L2CR,r3
+3: sync
+ isync
+ b 1f
+2: b 3f
+3: sync
+ isync
+ b 1b
+1: /* disp-flush L2. The interesting thing here is that the L2 can be
+ * up to 2Mb ... so using the ROM, we'll end up wrapping back to memory
+ * but that is probbaly fine. We disp-flush over 4Mb to be safe
+ */
+ lis r4,2
+ mtctr r4
+ lis r4,0xfff0
+1: lwz r0,0(r4)
+ addi r4,r4,32
+ bdnz 1b
+ sync
+ isync
+ lis r4,2
+ mtctr r4
+ lis r4,0xfff0
+1: dcbf 0,r4
+ addi r4,r4,32
+ bdnz 1b
+ sync
+ isync
+
+ /* now disable L2 */
+ rlwinm r5,r5,0,~L2CR_L2E
+ b 2f
+ /* When disabling L2, code must be in L1 */
+ .balign 32
+1: mtspr SPRN_L2CR,r5
+3: sync
+ isync
+ b 1f
+2: b 3f
+3: sync
+ isync
+ b 1b
+1: sync
+ isync
+ /* Invalidate L2. This is pre-745x, we clear the L2I bit ourselves */
+ oris r4,r5,L2CR_L2I@h
+ mtspr SPRN_L2CR,r4
+ sync
+ isync
+
+ /* Wait for the invalidation to complete */
+1: mfspr r3,SPRN_L2CR
+ rlwinm. r0,r3,0,31,31
+ bne 1b
+
+ /* Clear L2I */
+ xoris r4,r4,L2CR_L2I@h
+ sync
+ mtspr SPRN_L2CR,r4
+ sync
+
+ /* now disable the L1 data cache */
+ mfspr r0,SPRN_HID0
+ rlwinm r0,r0,0,~(HID0_DCE|HID0_ICE)
+ mtspr SPRN_HID0,r0
+ sync
+ isync
+
+ /* Restore HID0[DPM] to whatever it was before */
+ sync
+ mfspr r0,SPRN_HID0
+ rlwimi r0,r8,0,11,11 /* Turn back HID0[DPM] */
+ mtspr SPRN_HID0,r0
+ sync
+
+ /* restore DR and EE */
+ sync
+ mtmsr r11
+ isync
+
+ mtlr r10
+ blr
+
+/* This code is for 745x processors */
+flush_disable_745x:
+ /* Turn off EE and DR in MSR */
+ mfmsr r11
+ rlwinm r0,r11,0,~MSR_EE
+ rlwinm r0,r0,0,~MSR_DR
+ sync
+ mtmsr r0
+ isync
+
+ /* Stop prefetch streams */
+ DSSALL
+ sync
+
+ /* Disable L2 prefetching */
+ mfspr r0,SPRN_MSSCR0
+ rlwinm r0,r0,0,0,29
+ mtspr SPRN_MSSCR0,r0
+ sync
+ isync
+ lis r4,0
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+ dcbf 0,r4
+
+ /* Due to a bug with the HW flush on some CPU revs, we occasionally
+ * experience data corruption. I'm adding a displacement flush along
+ * with a dcbf loop over a few Mb to "help". The problem isn't totally
+ * fixed by this in theory, but at least, in practice, I couldn't reproduce
+ * it even with a big hammer...
+ */
+
+ lis r4,0x0002
+ mtctr r4
+ li r4,0
+1:
+ lwz r0,0(r4)
+ addi r4,r4,32 /* Go to start of next cache line */
+ bdnz 1b
+ isync
+
+ /* Now, flush the first 4MB of memory */
+ lis r4,0x0002
+ mtctr r4
+ li r4,0
+ sync
+1:
+ dcbf 0,r4
+ addi r4,r4,32 /* Go to start of next cache line */
+ bdnz 1b
+
+ /* Flush and disable the L1 data cache */
+ mfspr r6,SPRN_LDSTCR
+ lis r3,0xfff0 /* read from ROM for displacement flush */
+ li r4,0xfe /* start with only way 0 unlocked */
+ li r5,128 /* 128 lines in each way */
+1: mtctr r5
+ rlwimi r6,r4,0,24,31
+ mtspr SPRN_LDSTCR,r6
+ sync
+ isync
+2: lwz r0,0(r3) /* touch each cache line */
+ addi r3,r3,32
+ bdnz 2b
+ rlwinm r4,r4,1,24,30 /* move on to the next way */
+ ori r4,r4,1
+ cmpwi r4,0xff /* all done? */
+ bne 1b
+ /* now unlock the L1 data cache */
+ li r4,0
+ rlwimi r6,r4,0,24,31
+ sync
+ mtspr SPRN_LDSTCR,r6
+ sync
+ isync
+
+ /* Flush the L2 cache using the hardware assist */
+ mfspr r3,SPRN_L2CR
+ cmpwi r3,0 /* check if it is enabled first */
+ bge 4f
+ oris r0,r3,(L2CR_L2IO_745x|L2CR_L2DO_745x)@h
+ b 2f
+ /* When disabling/locking L2, code must be in L1 */
+ .balign 32
+1: mtspr SPRN_L2CR,r0 /* lock the L2 cache */
+3: sync
+ isync
+ b 1f
+2: b 3f
+3: sync
+ isync
+ b 1b
+1: sync
+ isync
+ ori r0,r3,L2CR_L2HWF_745x
+ sync
+ mtspr SPRN_L2CR,r0 /* set the hardware flush bit */
+3: mfspr r0,SPRN_L2CR /* wait for it to go to 0 */
+ andi. r0,r0,L2CR_L2HWF_745x
+ bne 3b
+ sync
+ rlwinm r3,r3,0,~L2CR_L2E
+ b 2f
+ /* When disabling L2, code must be in L1 */
+ .balign 32
+1: mtspr SPRN_L2CR,r3 /* disable the L2 cache */
+3: sync
+ isync
+ b 1f
+2: b 3f
+3: sync
+ isync
+ b 1b
+1: sync
+ isync
+ oris r4,r3,L2CR_L2I@h
+ mtspr SPRN_L2CR,r4
+ sync
+ isync
+1: mfspr r4,SPRN_L2CR
+ andis. r0,r4,L2CR_L2I@h
+ bne 1b
+ sync
+
+BEGIN_FTR_SECTION
+ /* Flush the L3 cache using the hardware assist */
+4: mfspr r3,SPRN_L3CR
+ cmpwi r3,0 /* check if it is enabled */
+ bge 6f
+ oris r0,r3,L3CR_L3IO@h
+ ori r0,r0,L3CR_L3DO
+ sync
+ mtspr SPRN_L3CR,r0 /* lock the L3 cache */
+ sync
+ isync
+ ori r0,r0,L3CR_L3HWF
+ sync
+ mtspr SPRN_L3CR,r0 /* set the hardware flush bit */
+5: mfspr r0,SPRN_L3CR /* wait for it to go to zero */
+ andi. r0,r0,L3CR_L3HWF
+ bne 5b
+ rlwinm r3,r3,0,~L3CR_L3E
+ sync
+ mtspr SPRN_L3CR,r3 /* disable the L3 cache */
+ sync
+ ori r4,r3,L3CR_L3I
+ mtspr SPRN_L3CR,r4
+1: mfspr r4,SPRN_L3CR
+ andi. r0,r4,L3CR_L3I
+ bne 1b
+ sync
+END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
+
+6: mfspr r0,SPRN_HID0 /* now disable the L1 data cache */
+ rlwinm r0,r0,0,~HID0_DCE
+ mtspr SPRN_HID0,r0
+ sync
+ isync
+ mtmsr r11 /* restore DR and EE */
+ isync
+ blr
+#endif /* CONFIG_6xx */
diff --git a/arch/powerpc/platforms/powermac/pmac_cpufreq.c b/arch/powerpc/platforms/powermac/pmac_cpufreq.c
new file mode 100644
index 0000000..6d32d99
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_cpufreq.c
@@ -0,0 +1,728 @@
+/*
+ * arch/ppc/platforms/pmac_cpufreq.c
+ *
+ * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright (C) 2004 John Steele Scott <toojays@toojays.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * TODO: Need a big cleanup here. Basically, we need to have different
+ * cpufreq_driver structures for the different type of HW instead of the
+ * current mess. We also need to better deal with the detection of the
+ * type of machine.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/slab.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/i2c.h>
+#include <linux/hardirq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/irq.h>
+#include <asm/pmac_feature.h>
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/system.h>
+#include <asm/mpic.h>
+#include <asm/keylargo.h>
+
+/* WARNING !!! This will cause calibrate_delay() to be called,
+ * but this is an __init function ! So you MUST go edit
+ * init/main.c to make it non-init before enabling DEBUG_FREQ
+ */
+#undef DEBUG_FREQ
+
+/*
+ * There is a problem with the core cpufreq code on SMP kernels,
+ * it won't recalculate the Bogomips properly
+ */
+#ifdef CONFIG_SMP
+#warning "WARNING, CPUFREQ not recommended on SMP kernels"
+#endif
+
+extern void low_choose_7447a_dfs(int dfs);
+extern void low_choose_750fx_pll(int pll);
+extern void low_sleep_handler(void);
+
+/*
+ * Currently, PowerMac cpufreq supports only high & low frequencies
+ * that are set by the firmware
+ */
+static unsigned int low_freq;
+static unsigned int hi_freq;
+static unsigned int cur_freq;
+static unsigned int sleep_freq;
+
+/*
+ * Different models uses different mecanisms to switch the frequency
+ */
+static int (*set_speed_proc)(int low_speed);
+static unsigned int (*get_speed_proc)(void);
+
+/*
+ * Some definitions used by the various speedprocs
+ */
+static u32 voltage_gpio;
+static u32 frequency_gpio;
+static u32 slew_done_gpio;
+static int no_schedule;
+static int has_cpu_l2lve;
+static int is_pmu_based;
+
+/* There are only two frequency states for each processor. Values
+ * are in kHz for the time being.
+ */
+#define CPUFREQ_HIGH 0
+#define CPUFREQ_LOW 1
+
+static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
+ {CPUFREQ_HIGH, 0},
+ {CPUFREQ_LOW, 0},
+ {0, CPUFREQ_TABLE_END},
+};
+
+static struct freq_attr* pmac_cpu_freqs_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static inline void local_delay(unsigned long ms)
+{
+ if (no_schedule)
+ mdelay(ms);
+ else
+ msleep(ms);
+}
+
+static inline void wakeup_decrementer(void)
+{
+ set_dec(tb_ticks_per_jiffy);
+ /* No currently-supported powerbook has a 601,
+ * so use get_tbl, not native
+ */
+ last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
+}
+
+#ifdef DEBUG_FREQ
+static inline void debug_calc_bogomips(void)
+{
+ /* This will cause a recalc of bogomips and display the
+ * result. We backup/restore the value to avoid affecting the
+ * core cpufreq framework's own calculation.
+ */
+ extern void calibrate_delay(void);
+
+ unsigned long save_lpj = loops_per_jiffy;
+ calibrate_delay();
+ loops_per_jiffy = save_lpj;
+}
+#endif /* DEBUG_FREQ */
+
+/* Switch CPU speed under 750FX CPU control
+ */
+static int cpu_750fx_cpu_speed(int low_speed)
+{
+ u32 hid2;
+
+ if (low_speed == 0) {
+ /* ramping up, set voltage first */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Make sure we sleep for at least 1ms */
+ local_delay(10);
+
+ /* tweak L2 for high voltage */
+ if (has_cpu_l2lve) {
+ hid2 = mfspr(SPRN_HID2);
+ hid2 &= ~0x2000;
+ mtspr(SPRN_HID2, hid2);
+ }
+ }
+#ifdef CONFIG_6xx
+ low_choose_750fx_pll(low_speed);
+#endif
+ if (low_speed == 1) {
+ /* tweak L2 for low voltage */
+ if (has_cpu_l2lve) {
+ hid2 = mfspr(SPRN_HID2);
+ hid2 |= 0x2000;
+ mtspr(SPRN_HID2, hid2);
+ }
+
+ /* ramping down, set voltage last */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ local_delay(10);
+ }
+
+ return 0;
+}
+
+static unsigned int cpu_750fx_get_cpu_speed(void)
+{
+ if (mfspr(SPRN_HID1) & HID1_PS)
+ return low_freq;
+ else
+ return hi_freq;
+}
+
+/* Switch CPU speed using DFS */
+static int dfs_set_cpu_speed(int low_speed)
+{
+ if (low_speed == 0) {
+ /* ramping up, set voltage first */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Make sure we sleep for at least 1ms */
+ local_delay(1);
+ }
+
+ /* set frequency */
+#ifdef CONFIG_6xx
+ low_choose_7447a_dfs(low_speed);
+#endif
+ udelay(100);
+
+ if (low_speed == 1) {
+ /* ramping down, set voltage last */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ local_delay(1);
+ }
+
+ return 0;
+}
+
+static unsigned int dfs_get_cpu_speed(void)
+{
+ if (mfspr(SPRN_HID1) & HID1_DFS)
+ return low_freq;
+ else
+ return hi_freq;
+}
+
+
+/* Switch CPU speed using slewing GPIOs
+ */
+static int gpios_set_cpu_speed(int low_speed)
+{
+ int gpio, timeout = 0;
+
+ /* If ramping up, set voltage first */
+ if (low_speed == 0) {
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
+ /* Delay is way too big but it's ok, we schedule */
+ local_delay(10);
+ }
+
+ /* Set frequency */
+ gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+ if (low_speed == ((gpio & 0x01) == 0))
+ goto skip;
+
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
+ low_speed ? 0x04 : 0x05);
+ udelay(200);
+ do {
+ if (++timeout > 100)
+ break;
+ local_delay(1);
+ gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
+ } while((gpio & 0x02) == 0);
+ skip:
+ /* If ramping down, set voltage last */
+ if (low_speed == 1) {
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
+ /* Delay is way too big but it's ok, we schedule */
+ local_delay(10);
+ }
+
+#ifdef DEBUG_FREQ
+ debug_calc_bogomips();
+#endif
+
+ return 0;
+}
+
+/* Switch CPU speed under PMU control
+ */
+static int pmu_set_cpu_speed(int low_speed)
+{
+ struct adb_request req;
+ unsigned long save_l2cr;
+ unsigned long save_l3cr;
+ unsigned int pic_prio;
+ unsigned long flags;
+
+ preempt_disable();
+
+#ifdef DEBUG_FREQ
+ printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
+#endif
+ pmu_suspend();
+
+ /* Disable all interrupt sources on openpic */
+ pic_prio = mpic_cpu_get_priority();
+ mpic_cpu_set_priority(0xf);
+
+ /* Make sure the decrementer won't interrupt us */
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ /* Make sure any pending DEC interrupt occuring while we did
+ * the above didn't re-enable the DEC */
+ mb();
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+ /* We can now disable MSR_EE */
+ local_irq_save(flags);
+
+ /* Giveup the FPU & vec */
+ enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC))
+ enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+ /* Save & disable L2 and L3 caches */
+ save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
+ save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
+
+ /* Send the new speed command. My assumption is that this command
+ * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
+ */
+ pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
+ while (!req.complete)
+ pmu_poll();
+
+ /* Prepare the northbridge for the speed transition */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
+
+ /* Call low level code to backup CPU state and recover from
+ * hardware reset
+ */
+ low_sleep_handler();
+
+ /* Restore the northbridge */
+ pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
+
+ /* Restore L2 cache */
+ if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
+ _set_L2CR(save_l2cr);
+ /* Restore L3 cache */
+ if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
+ _set_L3CR(save_l3cr);
+
+ /* Restore userland MMU context */
+ set_context(current->active_mm->context, current->active_mm->pgd);
+
+#ifdef DEBUG_FREQ
+ printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
+#endif
+
+ /* Restore low level PMU operations */
+ pmu_unlock();
+
+ /* Restore decrementer */
+ wakeup_decrementer();
+
+ /* Restore interrupts */
+ mpic_cpu_set_priority(pic_prio);
+
+ /* Let interrupts flow again ... */
+ local_irq_restore(flags);
+
+#ifdef DEBUG_FREQ
+ debug_calc_bogomips();
+#endif
+
+ pmu_resume();
+
+ preempt_enable();
+
+ return 0;
+}
+
+static int do_set_cpu_speed(int speed_mode, int notify)
+{
+ struct cpufreq_freqs freqs;
+ unsigned long l3cr;
+ static unsigned long prev_l3cr;
+
+ freqs.old = cur_freq;
+ freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+ freqs.cpu = smp_processor_id();
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ if (notify)
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ if (speed_mode == CPUFREQ_LOW &&
+ cpu_has_feature(CPU_FTR_L3CR)) {
+ l3cr = _get_L3CR();
+ if (l3cr & L3CR_L3E) {
+ prev_l3cr = l3cr;
+ _set_L3CR(0);
+ }
+ }
+ set_speed_proc(speed_mode == CPUFREQ_LOW);
+ if (speed_mode == CPUFREQ_HIGH &&
+ cpu_has_feature(CPU_FTR_L3CR)) {
+ l3cr = _get_L3CR();
+ if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
+ _set_L3CR(prev_l3cr);
+ }
+ if (notify)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+ cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
+
+ return 0;
+}
+
+static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
+{
+ return cur_freq;
+}
+
+static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
+}
+
+static int pmac_cpufreq_target( struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ unsigned int newstate = 0;
+
+ if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
+ target_freq, relation, &newstate))
+ return -EINVAL;
+
+ return do_set_cpu_speed(newstate, 1);
+}
+
+unsigned int pmac_get_one_cpufreq(int i)
+{
+ /* Supports only one CPU for now */
+ return (i == 0) ? cur_freq : 0;
+}
+
+static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -ENODEV;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ policy->cur = cur_freq;
+
+ cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
+}
+
+static u32 read_gpio(struct device_node *np)
+{
+ u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ u32 offset;
+
+ if (reg == NULL)
+ return 0;
+ /* That works for all keylargos but shall be fixed properly
+ * some day... The problem is that it seems we can't rely
+ * on the "reg" property of the GPIO nodes, they are either
+ * relative to the base of KeyLargo or to the base of the
+ * GPIO space, and the device-tree doesn't help.
+ */
+ offset = *reg;
+ if (offset < KEYLARGO_GPIO_LEVELS0)
+ offset += KEYLARGO_GPIO_LEVELS0;
+ return offset;
+}
+
+static int pmac_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+ /* Ok, this could be made a bit smarter, but let's be robust for now. We
+ * always force a speed change to high speed before sleep, to make sure
+ * we have appropriate voltage and/or bus speed for the wakeup process,
+ * and to make sure our loops_per_jiffies are "good enough", that is will
+ * not cause too short delays if we sleep in low speed and wake in high
+ * speed..
+ */
+ no_schedule = 1;
+ sleep_freq = cur_freq;
+ if (cur_freq == low_freq && !is_pmu_based)
+ do_set_cpu_speed(CPUFREQ_HIGH, 0);
+ return 0;
+}
+
+static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
+{
+ /* If we resume, first check if we have a get() function */
+ if (get_speed_proc)
+ cur_freq = get_speed_proc();
+ else
+ cur_freq = 0;
+
+ /* We don't, hrm... we don't really know our speed here, best
+ * is that we force a switch to whatever it was, which is
+ * probably high speed due to our suspend() routine
+ */
+ do_set_cpu_speed(sleep_freq == low_freq ?
+ CPUFREQ_LOW : CPUFREQ_HIGH, 0);
+
+ no_schedule = 0;
+ return 0;
+}
+
+static struct cpufreq_driver pmac_cpufreq_driver = {
+ .verify = pmac_cpufreq_verify,
+ .target = pmac_cpufreq_target,
+ .get = pmac_cpufreq_get_speed,
+ .init = pmac_cpufreq_cpu_init,
+ .suspend = pmac_cpufreq_suspend,
+ .resume = pmac_cpufreq_resume,
+ .flags = CPUFREQ_PM_NO_WARN,
+ .attr = pmac_cpu_freqs_attr,
+ .name = "powermac",
+ .owner = THIS_MODULE,
+};
+
+
+static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
+ "voltage-gpio");
+ struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
+ "frequency-gpio");
+ struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
+ "slewing-done");
+ u32 *value;
+
+ /*
+ * Check to see if it's GPIO driven or PMU only
+ *
+ * The way we extract the GPIO address is slightly hackish, but it
+ * works well enough for now. We need to abstract the whole GPIO
+ * stuff sooner or later anyway
+ */
+
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+ if (freq_gpio_np)
+ frequency_gpio = read_gpio(freq_gpio_np);
+ if (slew_done_gpio_np)
+ slew_done_gpio = read_gpio(slew_done_gpio_np);
+
+ /* If we use the frequency GPIOs, calculate the min/max speeds based
+ * on the bus frequencies
+ */
+ if (frequency_gpio && slew_done_gpio) {
+ int lenp, rc;
+ u32 *freqs, *ratio;
+
+ freqs = (u32 *)get_property(cpunode, "bus-frequencies", &lenp);
+ lenp /= sizeof(u32);
+ if (freqs == NULL || lenp != 2) {
+ printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+ return 1;
+ }
+ ratio = (u32 *)get_property(cpunode, "processor-to-bus-ratio*2", NULL);
+ if (ratio == NULL) {
+ printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+ return 1;
+ }
+
+ /* Get the min/max bus frequencies */
+ low_freq = min(freqs[0], freqs[1]);
+ hi_freq = max(freqs[0], freqs[1]);
+
+ /* Grrrr.. It _seems_ that the device-tree is lying on the low bus
+ * frequency, it claims it to be around 84Mhz on some models while
+ * it appears to be approx. 101Mhz on all. Let's hack around here...
+ * fortunately, we don't need to be too precise
+ */
+ if (low_freq < 98000000)
+ low_freq = 101000000;
+
+ /* Convert those to CPU core clocks */
+ low_freq = (low_freq * (*ratio)) / 2000;
+ hi_freq = (hi_freq * (*ratio)) / 2000;
+
+ /* Now we get the frequencies, we read the GPIO to see what is out current
+ * speed
+ */
+ rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
+ cur_freq = (rc & 0x01) ? hi_freq : low_freq;
+
+ set_speed_proc = gpios_set_cpu_speed;
+ return 1;
+ }
+
+ /* If we use the PMU, look for the min & max frequencies in the
+ * device-tree
+ */
+ value = (u32 *)get_property(cpunode, "min-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ low_freq = (*value) / 1000;
+ /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
+ * here */
+ if (low_freq < 100000)
+ low_freq *= 10;
+
+ value = (u32 *)get_property(cpunode, "max-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ hi_freq = (*value) / 1000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+
+ return 0;
+}
+
+static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np;
+
+ if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ return 1;
+
+ volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+ if (!voltage_gpio){
+ printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+ return 1;
+ }
+
+ /* OF only reports the high frequency */
+ hi_freq = cur_freq;
+ low_freq = cur_freq/2;
+
+ /* Read actual frequency from CPU */
+ cur_freq = dfs_get_cpu_speed();
+ set_speed_proc = dfs_set_cpu_speed;
+ get_speed_proc = dfs_get_cpu_speed;
+
+ return 0;
+}
+
+static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
+{
+ struct device_node *volt_gpio_np;
+ u32 pvr, *value;
+
+ if (get_property(cpunode, "dynamic-power-step", NULL) == NULL)
+ return 1;
+
+ hi_freq = cur_freq;
+ value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL);
+ if (!value)
+ return 1;
+ low_freq = (*value) / 1000;
+
+ volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
+ if (volt_gpio_np)
+ voltage_gpio = read_gpio(volt_gpio_np);
+
+ pvr = mfspr(SPRN_PVR);
+ has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
+
+ set_speed_proc = cpu_750fx_cpu_speed;
+ get_speed_proc = cpu_750fx_get_cpu_speed;
+ cur_freq = cpu_750fx_get_cpu_speed();
+
+ return 0;
+}
+
+/* Currently, we support the following machines:
+ *
+ * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
+ * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
+ * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
+ * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
+ * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
+ * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
+ * - Recent MacRISC3 laptops
+ * - All new machines with 7447A CPUs
+ */
+static int __init pmac_cpufreq_setup(void)
+{
+ struct device_node *cpunode;
+ u32 *value;
+
+ if (strstr(cmd_line, "nocpufreq"))
+ return 0;
+
+ /* Assume only one CPU */
+ cpunode = find_type_devices("cpu");
+ if (!cpunode)
+ goto out;
+
+ /* Get current cpu clock freq */
+ value = (u32 *)get_property(cpunode, "clock-frequency", NULL);
+ if (!value)
+ goto out;
+ cur_freq = (*value) / 1000;
+
+ /* Check for 7447A based MacRISC3 */
+ if (machine_is_compatible("MacRISC3") &&
+ get_property(cpunode, "dynamic-power-step", NULL) &&
+ PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
+ pmac_cpufreq_init_7447A(cpunode);
+ /* Check for other MacRISC3 machines */
+ } else if (machine_is_compatible("PowerBook3,4") ||
+ machine_is_compatible("PowerBook3,5") ||
+ machine_is_compatible("MacRISC3")) {
+ pmac_cpufreq_init_MacRISC3(cpunode);
+ /* Else check for iBook2 500/600 */
+ } else if (machine_is_compatible("PowerBook4,1")) {
+ hi_freq = cur_freq;
+ low_freq = 400000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for TiPb 400 & 500 */
+ else if (machine_is_compatible("PowerBook3,2")) {
+ /* We only know about the 400 MHz and the 500Mhz model
+ * they both have 300 MHz as low frequency
+ */
+ if (cur_freq < 350000 || cur_freq > 550000)
+ goto out;
+ hi_freq = cur_freq;
+ low_freq = 300000;
+ set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
+ }
+ /* Else check for 750FX */
+ else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
+ pmac_cpufreq_init_750FX(cpunode);
+out:
+ if (set_speed_proc == NULL)
+ return -ENODEV;
+
+ pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
+ pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
+
+ printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
+ printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+ low_freq/1000, hi_freq/1000, cur_freq/1000);
+
+ return cpufreq_register_driver(&pmac_cpufreq_driver);
+}
+
+module_init(pmac_cpufreq_setup);
+
diff --git a/arch/powerpc/platforms/powermac/pmac_feature.c b/arch/powerpc/platforms/powermac/pmac_feature.c
new file mode 100644
index 0000000..2cba670
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_feature.c
@@ -0,0 +1,3062 @@
+/*
+ * arch/ppc/platforms/pmac_feature.c
+ *
+ * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
+ * Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * TODO:
+ *
+ * - Replace mdelay with some schedule loop if possible
+ * - Shorten some obfuscated delays on some routines (like modem
+ * power)
+ * - Refcount some clocks (see darwin)
+ * - Split split split...
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <asm/sections.h>
+#include <asm/errno.h>
+#include <asm/ohare.h>
+#include <asm/heathrow.h>
+#include <asm/keylargo.h>
+#include <asm/uninorth.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/pmac_low_i2c.h>
+
+#undef DEBUG_FEATURE
+
+#ifdef DEBUG_FEATURE
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_6xx
+extern int powersave_lowspeed;
+#endif
+
+extern int powersave_nap;
+extern struct device_node *k2_skiplist[2];
+
+
+/*
+ * We use a single global lock to protect accesses. Each driver has
+ * to take care of its own locking
+ */
+static DEFINE_SPINLOCK(feature_lock);
+
+#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
+
+
+/*
+ * Instance of some macio stuffs
+ */
+struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+struct macio_chip *macio_find(struct device_node *child, int type)
+{
+ while(child) {
+ int i;
+
+ for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
+ if (child == macio_chips[i].of_node &&
+ (!type || macio_chips[i].type == type))
+ return &macio_chips[i];
+ child = child->parent;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(macio_find);
+
+static const char *macio_names[] =
+{
+ "Unknown",
+ "Grand Central",
+ "OHare",
+ "OHareII",
+ "Heathrow",
+ "Gatwick",
+ "Paddington",
+ "Keylargo",
+ "Pangea",
+ "Intrepid",
+ "K2"
+};
+
+
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r) (uninorth_base + ((r) >> 2))
+#define UN_IN(r) (in_be32(UN_REG(r)))
+#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
+
+static struct device_node *uninorth_node;
+static u32 __iomem *uninorth_base;
+static u32 uninorth_rev;
+static int uninorth_u3;
+static void __iomem *u3_ht;
+
+/*
+ * For each motherboard family, we have a table of functions pointers
+ * that handle the various features.
+ */
+
+typedef long (*feature_call)(struct device_node *node, long param, long value);
+
+struct feature_table_entry {
+ unsigned int selector;
+ feature_call function;
+};
+
+struct pmac_mb_def
+{
+ const char* model_string;
+ const char* model_name;
+ int model_id;
+ struct feature_table_entry* features;
+ unsigned long board_flags;
+};
+static struct pmac_mb_def pmac_mb;
+
+/*
+ * Here are the chip specific feature functions
+ */
+
+static inline int simple_feature_tweak(struct device_node *node, int type,
+ int reg, u32 mask, int value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, type);
+ if (!macio)
+ return -ENODEV;
+ LOCK(flags);
+ if (value)
+ MACIO_BIS(reg, mask);
+ else
+ MACIO_BIC(reg, mask);
+ (void)MACIO_IN32(reg);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+#ifndef CONFIG_POWER4
+
+static long ohare_htw_scc_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long chan_mask;
+ unsigned long fcr;
+ unsigned long flags;
+ int htw, trans;
+ unsigned long rmask;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (!strcmp(node->name, "ch-a"))
+ chan_mask = MACIO_FLAG_SCCA_ON;
+ else if (!strcmp(node->name, "ch-b"))
+ chan_mask = MACIO_FLAG_SCCB_ON;
+ else
+ return -ENODEV;
+
+ htw = (macio->type == macio_heathrow || macio->type == macio_paddington
+ || macio->type == macio_gatwick);
+ /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
+ trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+ pmac_mb.model_id != PMAC_TYPE_YIKES);
+ if (value) {
+#ifdef CONFIG_ADB_PMU
+ if ((param & 0xfff) == PMAC_SCC_IRDA)
+ pmu_enable_irled(1);
+#endif /* CONFIG_ADB_PMU */
+ LOCK(flags);
+ fcr = MACIO_IN32(OHARE_FCR);
+ /* Check if scc cell need enabling */
+ if (!(fcr & OH_SCC_ENABLE)) {
+ fcr |= OH_SCC_ENABLE;
+ if (htw) {
+ /* Side effect: this will also power up the
+ * modem, but it's too messy to figure out on which
+ * ports this controls the tranceiver and on which
+ * it controls the modem
+ */
+ if (trans)
+ fcr &= ~HRW_SCC_TRANS_EN_N;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ fcr |= (rmask = HRW_RESET_SCC);
+ MACIO_OUT32(OHARE_FCR, fcr);
+ } else {
+ fcr |= (rmask = OH_SCC_RESET);
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ UNLOCK(flags);
+ (void)MACIO_IN32(OHARE_FCR);
+ mdelay(15);
+ LOCK(flags);
+ fcr &= ~rmask;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr |= OH_SCCA_IO;
+ if (chan_mask & MACIO_FLAG_SCCB_ON)
+ fcr |= OH_SCCB_IO;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ macio->flags |= chan_mask;
+ UNLOCK(flags);
+ if (param & PMAC_SCC_FLAG_XMON)
+ macio->flags |= MACIO_FLAG_SCC_LOCKED;
+ } else {
+ if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+ return -EPERM;
+ LOCK(flags);
+ fcr = MACIO_IN32(OHARE_FCR);
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr &= ~OH_SCCA_IO;
+ if (chan_mask & MACIO_FLAG_SCCB_ON)
+ fcr &= ~OH_SCCB_IO;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
+ fcr &= ~OH_SCC_ENABLE;
+ if (htw && trans)
+ fcr |= HRW_SCC_TRANS_EN_N;
+ MACIO_OUT32(OHARE_FCR, fcr);
+ }
+ macio->flags &= ~(chan_mask);
+ UNLOCK(flags);
+ mdelay(10);
+#ifdef CONFIG_ADB_PMU
+ if ((param & 0xfff) == PMAC_SCC_IRDA)
+ pmu_enable_irled(0);
+#endif /* CONFIG_ADB_PMU */
+ }
+ return 0;
+}
+
+static long ohare_floppy_enable(struct device_node *node, long param,
+ long value)
+{
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_FLOPPY_ENABLE, value);
+}
+
+static long ohare_mesh_enable(struct device_node *node, long param, long value)
+{
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_MESH_ENABLE, value);
+}
+
+static long ohare_ide_enable(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case 0:
+ /* For some reason, setting the bit in set_initial_features()
+ * doesn't stick. I'm still investigating... --BenH.
+ */
+ if (value)
+ simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IOBUS_ENABLE, 1);
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_BAY_IDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long ohare_ide_reset(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_ohare,
+ OHARE_FCR, OH_IDE1_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long ohare_sleep_state(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio = &macio_chips[0];
+
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value == 1) {
+ MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
+ } else if (value == 0) {
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ }
+
+ return 0;
+}
+
+static long heathrow_modem_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ macio = macio_find(node, macio_unknown);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+ pmac_mb.model_id != PMAC_TYPE_YIKES) {
+ LOCK(flags);
+ if (value)
+ MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+ else
+ MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(250);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+ (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250);
+ }
+ return 0;
+}
+
+static long heathrow_floppy_enable(struct device_node *node, long param,
+ long value)
+{
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR,
+ HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
+ value);
+}
+
+static long heathrow_mesh_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, macio_unknown);
+ if (!macio)
+ return -ENODEV;
+ LOCK(flags);
+ /* Set clear mesh cell enable */
+ if (value)
+ MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
+ else
+ MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ udelay(10);
+ /* Set/Clear termination power */
+ if (value)
+ MACIO_BIC(HEATHROW_MBCR, 0x04000000);
+ else
+ MACIO_BIS(HEATHROW_MBCR, 0x04000000);
+ (void)MACIO_IN32(HEATHROW_MBCR);
+ udelay(10);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static long heathrow_ide_enable(struct device_node *node, long param,
+ long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long heathrow_ide_reset(struct device_node *node, long param,
+ long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long heathrow_bmac_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (value) {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+ MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ mdelay(10);
+ } else {
+ LOCK(flags);
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static long heathrow_sound_enable(struct device_node *node, long param,
+ long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ /* B&W G3 and Yikes don't support that properly (the
+ * sound appear to never come back after beeing shut down).
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
+ pmac_mb.model_id == PMAC_TYPE_YIKES)
+ return 0;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (value) {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ UNLOCK(flags);
+ (void)MACIO_IN32(HEATHROW_FCR);
+ } else {
+ LOCK(flags);
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static u32 save_fcr[6];
+static u32 save_mbcr;
+static u32 save_gpio_levels[2];
+static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
+static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
+static u32 save_unin_clock_ctl;
+static struct dbdma_regs save_dbdma[13];
+static struct dbdma_regs save_alt_dbdma[13];
+
+static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
+{
+ int i;
+
+ /* Save state & config of DBDMA channels */
+ for (i = 0; i < 13; i++) {
+ volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+ (macio->base + ((0x8000+i*0x100)>>2));
+ save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
+ save[i].cmdptr = in_le32(&chan->cmdptr);
+ save[i].intr_sel = in_le32(&chan->intr_sel);
+ save[i].br_sel = in_le32(&chan->br_sel);
+ save[i].wait_sel = in_le32(&chan->wait_sel);
+ }
+}
+
+static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
+{
+ int i;
+
+ /* Save state & config of DBDMA channels */
+ for (i = 0; i < 13; i++) {
+ volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+ (macio->base + ((0x8000+i*0x100)>>2));
+ out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
+ while (in_le32(&chan->status) & ACTIVE)
+ mb();
+ out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
+ out_le32(&chan->cmdptr, save[i].cmdptr);
+ out_le32(&chan->intr_sel, save[i].intr_sel);
+ out_le32(&chan->br_sel, save[i].br_sel);
+ out_le32(&chan->wait_sel, save[i].wait_sel);
+ }
+}
+
+static void heathrow_sleep(struct macio_chip *macio, int secondary)
+{
+ if (secondary) {
+ dbdma_save(macio, save_alt_dbdma);
+ save_fcr[2] = MACIO_IN32(0x38);
+ save_fcr[3] = MACIO_IN32(0x3c);
+ } else {
+ dbdma_save(macio, save_dbdma);
+ save_fcr[0] = MACIO_IN32(0x38);
+ save_fcr[1] = MACIO_IN32(0x3c);
+ save_mbcr = MACIO_IN32(0x34);
+ /* Make sure sound is shut down */
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ /* This seems to be necessary as well or the fan
+ * keeps coming up and battery drains fast */
+ MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
+ /* Make sure eth is down even if module or sleep
+ * won't work properly */
+ MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
+ }
+ /* Make sure modem is shut down */
+ MACIO_OUT8(HRW_GPIO_MODEM_RESET,
+ MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
+ MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+ MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
+
+ /* Let things settle */
+ (void)MACIO_IN32(HEATHROW_FCR);
+}
+
+static void heathrow_wakeup(struct macio_chip *macio, int secondary)
+{
+ if (secondary) {
+ MACIO_OUT32(0x38, save_fcr[2]);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x3c, save_fcr[3]);
+ (void)MACIO_IN32(0x38);
+ mdelay(10);
+ dbdma_restore(macio, save_alt_dbdma);
+ } else {
+ MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x3c, save_fcr[1]);
+ (void)MACIO_IN32(0x38);
+ mdelay(1);
+ MACIO_OUT32(0x34, save_mbcr);
+ (void)MACIO_IN32(0x38);
+ mdelay(10);
+ dbdma_restore(macio, save_dbdma);
+ }
+}
+
+static long heathrow_sleep_state(struct device_node *node, long param,
+ long value)
+{
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+ if (value == 1) {
+ if (macio_chips[1].type == macio_gatwick)
+ heathrow_sleep(&macio_chips[0], 1);
+ heathrow_sleep(&macio_chips[0], 0);
+ } else if (value == 0) {
+ heathrow_wakeup(&macio_chips[0], 0);
+ if (macio_chips[1].type == macio_gatwick)
+ heathrow_wakeup(&macio_chips[0], 1);
+ }
+ return 0;
+}
+
+static long core99_scc_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ unsigned long chan_mask;
+ u32 fcr;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ if (!strcmp(node->name, "ch-a"))
+ chan_mask = MACIO_FLAG_SCCA_ON;
+ else if (!strcmp(node->name, "ch-b"))
+ chan_mask = MACIO_FLAG_SCCB_ON;
+ else
+ return -ENODEV;
+
+ if (value) {
+ int need_reset_scc = 0;
+ int need_reset_irda = 0;
+
+ LOCK(flags);
+ fcr = MACIO_IN32(KEYLARGO_FCR0);
+ /* Check if scc cell need enabling */
+ if (!(fcr & KL0_SCC_CELL_ENABLE)) {
+ fcr |= KL0_SCC_CELL_ENABLE;
+ need_reset_scc = 1;
+ }
+ if (chan_mask & MACIO_FLAG_SCCA_ON) {
+ fcr |= KL0_SCCA_ENABLE;
+ /* Don't enable line drivers for I2S modem */
+ if ((param & 0xfff) == PMAC_SCC_I2S1)
+ fcr &= ~KL0_SCC_A_INTF_ENABLE;
+ else
+ fcr |= KL0_SCC_A_INTF_ENABLE;
+ }
+ if (chan_mask & MACIO_FLAG_SCCB_ON) {
+ fcr |= KL0_SCCB_ENABLE;
+ /* Perform irda specific inits */
+ if ((param & 0xfff) == PMAC_SCC_IRDA) {
+ fcr &= ~KL0_SCC_B_INTF_ENABLE;
+ fcr |= KL0_IRDA_ENABLE;
+ fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
+ fcr |= KL0_IRDA_SOURCE1_SEL;
+ fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+ fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+ need_reset_irda = 1;
+ } else
+ fcr |= KL0_SCC_B_INTF_ENABLE;
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ macio->flags |= chan_mask;
+ if (need_reset_scc) {
+ MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(15);
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
+ }
+ if (need_reset_irda) {
+ MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(15);
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
+ }
+ UNLOCK(flags);
+ if (param & PMAC_SCC_FLAG_XMON)
+ macio->flags |= MACIO_FLAG_SCC_LOCKED;
+ } else {
+ if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+ return -EPERM;
+ LOCK(flags);
+ fcr = MACIO_IN32(KEYLARGO_FCR0);
+ if (chan_mask & MACIO_FLAG_SCCA_ON)
+ fcr &= ~KL0_SCCA_ENABLE;
+ if (chan_mask & MACIO_FLAG_SCCB_ON) {
+ fcr &= ~KL0_SCCB_ENABLE;
+ /* Perform irda specific clears */
+ if ((param & 0xfff) == PMAC_SCC_IRDA) {
+ fcr &= ~KL0_IRDA_ENABLE;
+ fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
+ fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+ fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+ }
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
+ fcr &= ~KL0_SCC_CELL_ENABLE;
+ MACIO_OUT32(KEYLARGO_FCR0, fcr);
+ }
+ macio->flags &= ~(chan_mask);
+ UNLOCK(flags);
+ mdelay(10);
+ }
+ return 0;
+}
+
+static long
+core99_modem_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ /* Hack for internal USB modem */
+ if (node == NULL) {
+ if (macio_chips[0].type != macio_keylargo)
+ return -ENODEV;
+ node = macio_chips[0].of_node;
+ }
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+ gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+ gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ LOCK(flags);
+ if (value) {
+ MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ mdelay(250);
+ } else {
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ UNLOCK(flags);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250);
+ }
+ return 0;
+}
+
+static long
+pangea_modem_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ u8 gpio;
+ unsigned long flags;
+
+ /* Hack for internal USB modem */
+ if (node == NULL) {
+ if (macio_chips[0].type != macio_pangea &&
+ macio_chips[0].type != macio_intrepid)
+ return -ENODEV;
+ node = macio_chips[0].of_node;
+ }
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+ gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+ gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+ gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+ if (!value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ UNLOCK(flags);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ mdelay(250);
+ }
+ LOCK(flags);
+ if (value) {
+ MACIO_OUT8(KL_GPIO_MODEM_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE);
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ mdelay(250);
+ } else {
+ MACIO_OUT8(KL_GPIO_MODEM_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+ UNLOCK(flags);
+ }
+ if (value) {
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250); LOCK(flags);
+ MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+ (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+ UNLOCK(flags); mdelay(250);
+ }
+ return 0;
+}
+
+static long
+core99_ata100_enable(struct device_node *node, long value)
+{
+ unsigned long flags;
+ struct pci_dev *pdev = NULL;
+ u8 pbus, pid;
+
+ if (uninorth_rev < 0x24)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value)
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+ else
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ UNLOCK(flags);
+ udelay(20);
+
+ if (value) {
+ if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
+ pdev = pci_find_slot(pbus, pid);
+ if (pdev == NULL)
+ return 0;
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ }
+ return 0;
+}
+
+static long
+core99_ide_enable(struct device_node *node, long param, long value)
+{
+ /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
+ * based ata-100
+ */
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
+ case 2:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
+ case 3:
+ return core99_ata100_enable(node, value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long
+core99_ide_reset(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case 0:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
+ case 1:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
+ case 2:
+ return simple_feature_tweak(node, macio_unknown,
+ KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
+ default:
+ return -ENODEV;
+ }
+}
+
+static long
+core99_gmac_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+
+ LOCK(flags);
+ if (value)
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+ else
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ UNLOCK(flags);
+ udelay(20);
+
+ return 0;
+}
+
+static long
+core99_gmac_phy_reset(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct macio_chip *macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
+ UNLOCK(flags);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
+ KEYLARGO_GPIO_OUTOUT_DATA);
+ UNLOCK(flags);
+ mdelay(10);
+
+ return 0;
+}
+
+static long
+core99_sound_chip_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+
+ /* Do a better probe code, screamer G4 desktops &
+ * iMacs can do that too, add a recalibrate in
+ * the driver as well
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
+ pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
+ LOCK(flags);
+ if (value)
+ MACIO_OUT8(KL_GPIO_SOUND_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE |
+ KEYLARGO_GPIO_OUTOUT_DATA);
+ else
+ MACIO_OUT8(KL_GPIO_SOUND_POWER,
+ KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(KL_GPIO_SOUND_POWER);
+ UNLOCK(flags);
+ }
+ return 0;
+}
+
+static long
+core99_airport_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip* macio;
+ unsigned long flags;
+ int state;
+
+ macio = macio_find(node, 0);
+ if (!macio)
+ return -ENODEV;
+
+ /* Hint: we allow passing of macio itself for the sake of the
+ * sleep code
+ */
+ if (node != macio->of_node &&
+ (!node->parent || node->parent != macio->of_node))
+ return -ENODEV;
+ state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
+ if (value == state)
+ return 0;
+ if (value) {
+ /* This code is a reproduction of OF enable-cardslot
+ * and init-wireless methods, slightly hacked until
+ * I got it working.
+ */
+ LOCK(flags);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+ UNLOCK(flags);
+ mdelay(10);
+ LOCK(flags);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+ UNLOCK(flags);
+
+ mdelay(10);
+
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
+ udelay(10);
+ MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
+ (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
+ UNLOCK(flags);
+ udelay(10);
+ MACIO_OUT32(0x1c000, 0);
+ mdelay(1);
+ MACIO_OUT8(0x1a3e0, 0x41);
+ (void)MACIO_IN8(0x1a3e0);
+ udelay(10);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ UNLOCK(flags);
+ mdelay(100);
+
+ macio->flags |= MACIO_FLAG_AIRPORT_ON;
+ } else {
+ LOCK(flags);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+ (void)MACIO_IN32(KEYLARGO_FCR2);
+ MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
+ MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
+ (void)MACIO_IN8(KL_GPIO_AIRPORT_4);
+ UNLOCK(flags);
+
+ macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_SMP
+static long
+core99_reset_cpu(struct device_node *node, long param, long value)
+{
+ unsigned int reset_io = 0;
+ unsigned long flags;
+ struct macio_chip *macio;
+ struct device_node *np;
+ const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0,
+ KL_GPIO_RESET_CPU1,
+ KL_GPIO_RESET_CPU2,
+ KL_GPIO_RESET_CPU3 };
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo)
+ return -ENODEV;
+
+ np = find_path_device("/cpus");
+ if (np == NULL)
+ return -ENODEV;
+ for (np = np->child; np != NULL; np = np->sibling) {
+ u32 *num = (u32 *)get_property(np, "reg", NULL);
+ u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+ if (num == NULL || rst == NULL)
+ continue;
+ if (param == *num) {
+ reset_io = *rst;
+ break;
+ }
+ }
+ if (np == NULL || reset_io == 0)
+ reset_io = dflt_reset_lines[param];
+
+ LOCK(flags);
+ MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(reset_io);
+ udelay(1);
+ MACIO_OUT8(reset_io, 0);
+ (void)MACIO_IN8(reset_io);
+ UNLOCK(flags);
+
+ return 0;
+}
+#endif /* CONFIG_SMP */
+
+static long
+core99_usb_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio;
+ unsigned long flags;
+ char *prop;
+ int number;
+ u32 reg;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ prop = (char *)get_property(node, "AAPL,clock-id", NULL);
+ if (!prop)
+ return -ENODEV;
+ if (strncmp(prop, "usb0u048", 8) == 0)
+ number = 0;
+ else if (strncmp(prop, "usb1u148", 8) == 0)
+ number = 2;
+ else if (strncmp(prop, "usb2u248", 8) == 0)
+ number = 4;
+ else
+ return -ENODEV;
+
+ /* Sorry for the brute-force locking, but this is only used during
+ * sleep and the timing seem to be critical
+ */
+ LOCK(flags);
+ if (value) {
+ /* Turn ON */
+ if (number == 0) {
+ MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ UNLOCK(flags);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+ } else if (number == 2) {
+ MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+ } else if (number == 4) {
+ MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+ UNLOCK(flags);
+ (void)MACIO_IN32(KEYLARGO_FCR1);
+ mdelay(1);
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
+ }
+ if (number < 4) {
+ reg = MACIO_IN32(KEYLARGO_FCR4);
+ reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+ KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
+ reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+ KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
+ MACIO_OUT32(KEYLARGO_FCR4, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR4);
+ udelay(10);
+ } else {
+ reg = MACIO_IN32(KEYLARGO_FCR3);
+ reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
+ reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
+ MACIO_OUT32(KEYLARGO_FCR3, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR3);
+ udelay(10);
+ }
+ if (macio->type == macio_intrepid) {
+ /* wait for clock stopped bits to clear */
+ u32 test0 = 0, test1 = 0;
+ u32 status0, status1;
+ int timeout = 1000;
+
+ UNLOCK(flags);
+ switch (number) {
+ case 0:
+ test0 = UNI_N_CLOCK_STOPPED_USB0;
+ test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
+ break;
+ case 2:
+ test0 = UNI_N_CLOCK_STOPPED_USB1;
+ test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
+ break;
+ case 4:
+ test0 = UNI_N_CLOCK_STOPPED_USB2;
+ test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
+ break;
+ }
+ do {
+ if (--timeout <= 0) {
+ printk(KERN_ERR "core99_usb_enable: "
+ "Timeout waiting for clocks\n");
+ break;
+ }
+ mdelay(1);
+ status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
+ status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
+ } while ((status0 & test0) | (status1 & test1));
+ LOCK(flags);
+ }
+ } else {
+ /* Turn OFF */
+ if (number < 4) {
+ reg = MACIO_IN32(KEYLARGO_FCR4);
+ reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+ KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
+ reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+ KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
+ MACIO_OUT32(KEYLARGO_FCR4, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR4);
+ udelay(1);
+ } else {
+ reg = MACIO_IN32(KEYLARGO_FCR3);
+ reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
+ reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+ KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
+ MACIO_OUT32(KEYLARGO_FCR3, reg);
+ (void)MACIO_IN32(KEYLARGO_FCR3);
+ udelay(1);
+ }
+ if (number == 0) {
+ if (macio->type != macio_intrepid)
+ MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ } else if (number == 2) {
+ if (macio->type != macio_intrepid)
+ MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ } else if (number == 4) {
+ udelay(1);
+ MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+ (void)MACIO_IN32(KEYLARGO_FCR1);
+ }
+ udelay(1);
+ }
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static long
+core99_firewire_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct macio_chip *macio;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+ if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ } else {
+ UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+ (void)UN_IN(UNI_N_CLOCK_CNTL);
+ }
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long
+core99_firewire_cable_power(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+ struct macio_chip *macio;
+
+ /* Trick: we allow NULL node */
+ if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
+ return -ENODEV;
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+ if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
+ MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
+ udelay(10);
+ } else {
+ MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
+ MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
+ }
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long
+intrepid_aack_delay_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+
+ if (uninorth_rev < 0xd2)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (param)
+ UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+ else
+ UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+
+#endif /* CONFIG_POWER4 */
+
+static long
+core99_read_gpio(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+
+ return MACIO_IN8(param);
+}
+
+
+static long
+core99_write_gpio(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+
+ MACIO_OUT8(param, (u8)(value & 0xff));
+ return 0;
+}
+
+#ifdef CONFIG_POWER4
+static long g5_gmac_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+ unsigned long flags;
+
+ if (node == NULL)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+ mb();
+ k2_skiplist[0] = NULL;
+ } else {
+ k2_skiplist[0] = node;
+ mb();
+ MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+ }
+
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long g5_fw_enable(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+ unsigned long flags;
+
+ if (node == NULL)
+ return -ENODEV;
+
+ LOCK(flags);
+ if (value) {
+ MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+ mb();
+ k2_skiplist[1] = NULL;
+ } else {
+ k2_skiplist[1] = node;
+ mb();
+ MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+ }
+
+ UNLOCK(flags);
+ mdelay(1);
+
+ return 0;
+}
+
+static long g5_mpic_enable(struct device_node *node, long param, long value)
+{
+ unsigned long flags;
+
+ if (node->parent == NULL || strcmp(node->parent->name, "u3"))
+ return 0;
+
+ LOCK(flags);
+ UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
+ UNLOCK(flags);
+
+ return 0;
+}
+
+static long g5_eth_phy_reset(struct device_node *node, long param, long value)
+{
+ struct macio_chip *macio = &macio_chips[0];
+ struct device_node *phy;
+ int need_reset;
+
+ /*
+ * We must not reset the combo PHYs, only the BCM5221 found in
+ * the iMac G5.
+ */
+ phy = of_get_next_child(node, NULL);
+ if (!phy)
+ return -ENODEV;
+ need_reset = device_is_compatible(phy, "B5221");
+ of_node_put(phy);
+ if (!need_reset)
+ return 0;
+
+ /* PHY reset is GPIO 29, not in device-tree unfortunately */
+ MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
+ KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+ /* Thankfully, this is now always called at a time when we can
+ * schedule by sungem.
+ */
+ msleep(10);
+ MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
+
+ return 0;
+}
+
+static long g5_i2s_enable(struct device_node *node, long param, long value)
+{
+ /* Very crude implementation for now */
+ struct macio_chip *macio = &macio_chips[0];
+ unsigned long flags;
+
+ if (value == 0)
+ return 0; /* don't disable yet */
+
+ LOCK(flags);
+ MACIO_BIS(KEYLARGO_FCR3, KL3_CLK45_ENABLE | KL3_CLK49_ENABLE |
+ KL3_I2S0_CLK18_ENABLE);
+ udelay(10);
+ MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_I2S0_CELL_ENABLE |
+ K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE);
+ udelay(10);
+ MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_I2S0_RESET);
+ UNLOCK(flags);
+ udelay(10);
+
+ return 0;
+}
+
+
+#ifdef CONFIG_SMP
+static long g5_reset_cpu(struct device_node *node, long param, long value)
+{
+ unsigned int reset_io = 0;
+ unsigned long flags;
+ struct macio_chip *macio;
+ struct device_node *np;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo2)
+ return -ENODEV;
+
+ np = find_path_device("/cpus");
+ if (np == NULL)
+ return -ENODEV;
+ for (np = np->child; np != NULL; np = np->sibling) {
+ u32 *num = (u32 *)get_property(np, "reg", NULL);
+ u32 *rst = (u32 *)get_property(np, "soft-reset", NULL);
+ if (num == NULL || rst == NULL)
+ continue;
+ if (param == *num) {
+ reset_io = *rst;
+ break;
+ }
+ }
+ if (np == NULL || reset_io == 0)
+ return -ENODEV;
+
+ LOCK(flags);
+ MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+ (void)MACIO_IN8(reset_io);
+ udelay(1);
+ MACIO_OUT8(reset_io, 0);
+ (void)MACIO_IN8(reset_io);
+ UNLOCK(flags);
+
+ return 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * This can be called from pmac_smp so isn't static
+ *
+ * This takes the second CPU off the bus on dual CPU machines
+ * running UP
+ */
+void g5_phy_disable_cpu1(void)
+{
+ UN_OUT(U3_API_PHY_CONFIG_1, 0);
+}
+#endif /* CONFIG_POWER4 */
+
+#ifndef CONFIG_POWER4
+
+static void
+keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+ u32 temp;
+
+ if (sleep_mode) {
+ mdelay(1);
+ MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(1);
+ }
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE |
+ KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
+ KL0_IRDA_CLK19_ENABLE);
+
+ MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
+ MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+ KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
+ KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
+ KL1_UIDE_ENABLE);
+
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+ MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
+
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ if (macio->rev >= 2) {
+ temp |= KL3_SHUTDOWN_PLL2X;
+ if (sleep_mode)
+ temp |= KL3_SHUTDOWN_PLL_TOTAL;
+ }
+
+ temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+ KL3_SHUTDOWN_PLLKW35;
+ if (sleep_mode)
+ temp |= KL3_SHUTDOWN_PLLKW12;
+ temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
+ | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+ if (sleep_mode)
+ temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+ /* Flush posted writes & wait a bit */
+ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void
+pangea_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+ u32 temp;
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE |
+ KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+ KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+ KL1_UIDE_ENABLE);
+ if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+ MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+ MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+ KL3_SHUTDOWN_PLLKW35;
+ temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
+ | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
+ if (sleep_mode)
+ temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+ /* Flush posted writes & wait a bit */
+ (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void
+intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+ u32 temp;
+
+ MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+ KL0_SCC_CELL_ENABLE);
+
+ MACIO_BIC(KEYLARGO_FCR1,
+ /*KL1_USB2_CELL_ENABLE |*/
+ KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+ KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+ KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE);
+ if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+ MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+ temp = MACIO_IN32(KEYLARGO_FCR3);
+ temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
+ KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+ if (sleep_mode)
+ temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
+ MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+ /* Flush posted writes & wait a bit */
+ (void)MACIO_IN32(KEYLARGO_FCR0);
+ mdelay(10);
+}
+
+
+void pmac_tweak_clock_spreading(int enable)
+{
+ struct macio_chip *macio = &macio_chips[0];
+
+ /* Hack for doing clock spreading on some machines PowerBooks and
+ * iBooks. This implements the "platform-do-clockspreading" OF
+ * property as decoded manually on various models. For safety, we also
+ * check the product ID in the device-tree in cases we'll whack the i2c
+ * chip to make reasonably sure we won't set wrong values in there
+ *
+ * Of course, ultimately, we have to implement a real parser for
+ * the platform-do-* stuff...
+ */
+
+ if (macio->type == macio_intrepid) {
+ if (enable)
+ UN_OUT(UNI_N_CLOCK_SPREADING, 2);
+ else
+ UN_OUT(UNI_N_CLOCK_SPREADING, 0);
+ mdelay(40);
+ }
+
+ while (machine_is_compatible("PowerBook5,2") ||
+ machine_is_compatible("PowerBook5,3") ||
+ machine_is_compatible("PowerBook6,2") ||
+ machine_is_compatible("PowerBook6,3")) {
+ struct device_node *ui2c = of_find_node_by_type(NULL, "i2c");
+ struct device_node *dt = of_find_node_by_name(NULL, "device-tree");
+ u8 buffer[9];
+ u32 *productID;
+ int i, rc, changed = 0;
+
+ if (dt == NULL)
+ break;
+ productID = (u32 *)get_property(dt, "pid#", NULL);
+ if (productID == NULL)
+ break;
+ while(ui2c) {
+ struct device_node *p = of_get_parent(ui2c);
+ if (p && !strcmp(p->name, "uni-n"))
+ break;
+ ui2c = of_find_node_by_type(ui2c, "i2c");
+ }
+ if (ui2c == NULL)
+ break;
+ DBG("Trying to bump clock speed for PID: %08x...\n", *productID);
+ rc = pmac_low_i2c_open(ui2c, 1);
+ if (rc != 0)
+ break;
+ pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
+ rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
+ DBG("read result: %d,", rc);
+ if (rc != 0) {
+ pmac_low_i2c_close(ui2c);
+ break;
+ }
+ for (i=0; i<9; i++)
+ DBG(" %02x", buffer[i]);
+ DBG("\n");
+
+ switch(*productID) {
+ case 0x1182: /* AlBook 12" rev 2 */
+ case 0x1183: /* iBook G4 12" */
+ buffer[0] = (buffer[0] & 0x8f) | 0x70;
+ buffer[2] = (buffer[2] & 0x7f) | 0x00;
+ buffer[5] = (buffer[5] & 0x80) | 0x31;
+ buffer[6] = (buffer[6] & 0x40) | 0xb0;
+ buffer[7] = (buffer[7] & 0x00) | (enable ? 0xc0 : 0xba);
+ buffer[8] = (buffer[8] & 0x00) | 0x30;
+ changed = 1;
+ break;
+ case 0x3142: /* AlBook 15" (ATI M10) */
+ case 0x3143: /* AlBook 17" (ATI M10) */
+ buffer[0] = (buffer[0] & 0xaf) | 0x50;
+ buffer[2] = (buffer[2] & 0x7f) | 0x00;
+ buffer[5] = (buffer[5] & 0x80) | 0x31;
+ buffer[6] = (buffer[6] & 0x40) | 0xb0;
+ buffer[7] = (buffer[7] & 0x00) | (enable ? 0xd0 : 0xc0);
+ buffer[8] = (buffer[8] & 0x00) | 0x30;
+ changed = 1;
+ break;
+ default:
+ DBG("i2c-hwclock: Machine model not handled\n");
+ break;
+ }
+ if (!changed) {
+ pmac_low_i2c_close(ui2c);
+ break;
+ }
+ pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_stdsub);
+ rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_write, 0x80, buffer, 9);
+ DBG("write result: %d,", rc);
+ pmac_low_i2c_setmode(ui2c, pmac_low_i2c_mode_combined);
+ rc = pmac_low_i2c_xfer(ui2c, 0xd2 | pmac_low_i2c_read, 0x80, buffer, 9);
+ DBG("read result: %d,", rc);
+ if (rc != 0) {
+ pmac_low_i2c_close(ui2c);
+ break;
+ }
+ for (i=0; i<9; i++)
+ DBG(" %02x", buffer[i]);
+ pmac_low_i2c_close(ui2c);
+ break;
+ }
+}
+
+
+static int
+core99_sleep(void)
+{
+ struct macio_chip *macio;
+ int i;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ /* We power off the wireless slot in case it was not done
+ * by the driver. We don't power it on automatically however
+ */
+ if (macio->flags & MACIO_FLAG_AIRPORT_ON)
+ core99_airport_enable(macio->of_node, 0, 0);
+
+ /* We power off the FW cable. Should be done by the driver... */
+ if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
+ core99_firewire_enable(NULL, 0, 0);
+ core99_firewire_cable_power(NULL, 0, 0);
+ }
+
+ /* We make sure int. modem is off (in case driver lost it) */
+ if (macio->type == macio_keylargo)
+ core99_modem_enable(macio->of_node, 0, 0);
+ else
+ pangea_modem_enable(macio->of_node, 0, 0);
+
+ /* We make sure the sound is off as well */
+ core99_sound_chip_enable(macio->of_node, 0, 0);
+
+ /*
+ * Save various bits of KeyLargo
+ */
+
+ /* Save the state of the various GPIOs */
+ save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
+ save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
+ for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+ save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
+ for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+ save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
+
+ /* Save the FCRs */
+ if (macio->type == macio_keylargo)
+ save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
+ save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
+ save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
+ save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
+ save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
+ save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
+ if (macio->type == macio_pangea || macio->type == macio_intrepid)
+ save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
+
+ /* Save state & config of DBDMA channels */
+ dbdma_save(macio, save_dbdma);
+
+ /*
+ * Turn off as much as we can
+ */
+ if (macio->type == macio_pangea)
+ pangea_shutdown(macio, 1);
+ else if (macio->type == macio_intrepid)
+ intrepid_shutdown(macio, 1);
+ else if (macio->type == macio_keylargo)
+ keylargo_shutdown(macio, 1);
+
+ /*
+ * Put the host bridge to sleep
+ */
+
+ save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
+ /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
+ * enabled !
+ */
+ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
+ ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
+ udelay(100);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
+ mdelay(10);
+
+ /*
+ * FIXME: A bit of black magic with OpenPIC (don't ask me why)
+ */
+ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+ MACIO_BIS(0x506e0, 0x00400000);
+ MACIO_BIS(0x506e0, 0x80000000);
+ }
+ return 0;
+}
+
+static int
+core99_wake_up(void)
+{
+ struct macio_chip *macio;
+ int i;
+
+ macio = &macio_chips[0];
+ if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+ macio->type != macio_intrepid)
+ return -ENODEV;
+
+ /*
+ * Wakeup the host bridge
+ */
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+ udelay(10);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+ udelay(10);
+
+ /*
+ * Restore KeyLargo
+ */
+
+ if (macio->type == macio_keylargo) {
+ MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
+ (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+ }
+ MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
+ (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
+ (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
+ (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
+ (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+ MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
+ (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
+ if (macio->type == macio_pangea || macio->type == macio_intrepid) {
+ MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
+ (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
+ }
+
+ dbdma_restore(macio, save_dbdma);
+
+ MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
+ MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
+ for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+ MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
+ for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+ MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
+
+ /* FIXME more black magic with OpenPIC ... */
+ if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+ MACIO_BIC(0x506e0, 0x00400000);
+ MACIO_BIC(0x506e0, 0x80000000);
+ }
+
+ UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
+ udelay(100);
+
+ return 0;
+}
+
+static long
+core99_sleep_state(struct device_node *node, long param, long value)
+{
+ /* Param == 1 means to enter the "fake sleep" mode that is
+ * used for CPU speed switch
+ */
+ if (param == 1) {
+ if (value == 1) {
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
+ } else {
+ UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+ udelay(10);
+ UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+ udelay(10);
+ }
+ return 0;
+ }
+ if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+ return -EPERM;
+
+ if (value == 1)
+ return core99_sleep();
+ else if (value == 0)
+ return core99_wake_up();
+ return 0;
+}
+
+#endif /* CONFIG_POWER4 */
+
+static long
+generic_dev_can_wake(struct device_node *node, long param, long value)
+{
+ /* Todo: eventually check we are really dealing with on-board
+ * video device ...
+ */
+
+ if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
+ pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
+ return 0;
+}
+
+static long generic_get_mb_info(struct device_node *node, long param, long value)
+{
+ switch(param) {
+ case PMAC_MB_INFO_MODEL:
+ return pmac_mb.model_id;
+ case PMAC_MB_INFO_FLAGS:
+ return pmac_mb.board_flags;
+ case PMAC_MB_INFO_NAME:
+ /* hack hack hack... but should work */
+ *((const char **)value) = pmac_mb.model_name;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+
+/*
+ * Table definitions
+ */
+
+/* Used on any machine
+ */
+static struct feature_table_entry any_features[] = {
+ { PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
+ { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake },
+ { 0, NULL }
+};
+
+#ifndef CONFIG_POWER4
+
+/* OHare based motherboards. Currently, we only use these on the
+ * 2400,3400 and 3500 series powerbooks. Some older desktops seem
+ * to have issues with turning on/off those asic cells
+ */
+static struct feature_table_entry ohare_features[] = {
+ { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
+ { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
+ { PMAC_FTR_IDE_RESET, ohare_ide_reset},
+ { PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
+ { 0, NULL }
+};
+
+/* Heathrow desktop machines (Beige G3).
+ * Separated as some features couldn't be properly tested
+ * and the serial port control bits appear to confuse it.
+ */
+static struct feature_table_entry heathrow_desktop_features[] = {
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { 0, NULL }
+};
+
+/* Heathrow based laptop, that is the Wallstreet and mainstreet
+ * powerbooks.
+ */
+static struct feature_table_entry heathrow_laptop_features[] = {
+ { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
+ { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
+ { 0, NULL }
+};
+
+/* Paddington based machines
+ * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
+ */
+static struct feature_table_entry paddington_features[] = {
+ { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
+ { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
+ { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
+ { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
+ { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
+ { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
+ { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
+ { 0, NULL }
+};
+
+/* Core99 & MacRISC 2 machines (all machines released since the
+ * iBook (included), that is all AGP machines, except pangea
+ * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
+ * used on iBook2 & iMac "flow power".
+ */
+static struct feature_table_entry core99_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, core99_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* RackMac
+ */
+static struct feature_table_entry rackmac_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, core99_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* Pangea features
+ */
+static struct feature_table_entry pangea_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+/* Intrepid features
+ */
+static struct feature_table_entry intrepid_features[] = {
+ { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
+ { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
+ { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
+ { PMAC_FTR_IDE_RESET, core99_ide_reset },
+ { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
+ { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
+ { PMAC_FTR_USB_ENABLE, core99_usb_enable },
+ { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
+ { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
+ { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable },
+ { 0, NULL }
+};
+
+#else /* CONFIG_POWER4 */
+
+/* G5 features
+ */
+static struct feature_table_entry g5_features[] = {
+ { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable },
+ { PMAC_FTR_1394_ENABLE, g5_fw_enable },
+ { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable },
+ { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset },
+ { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable },
+#ifdef CONFIG_SMP
+ { PMAC_FTR_RESET_CPU, g5_reset_cpu },
+#endif /* CONFIG_SMP */
+ { PMAC_FTR_READ_GPIO, core99_read_gpio },
+ { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
+ { 0, NULL }
+};
+
+#endif /* CONFIG_POWER4 */
+
+static struct pmac_mb_def pmac_mb_defs[] = {
+#ifndef CONFIG_POWER4
+ /*
+ * Desktops
+ */
+
+ { "AAPL,8500", "PowerMac 8500/8600",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,9500", "PowerMac 9500/9600",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7200", "PowerMac 7200",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7300", "PowerMac 7200/7300",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,7500", "PowerMac 7500",
+ PMAC_TYPE_PSURGE, NULL,
+ 0
+ },
+ { "AAPL,ShinerESB", "Apple Network Server",
+ PMAC_TYPE_ANS, NULL,
+ 0
+ },
+ { "AAPL,e407", "Alchemy",
+ PMAC_TYPE_ALCHEMY, NULL,
+ 0
+ },
+ { "AAPL,e411", "Gazelle",
+ PMAC_TYPE_GAZELLE, NULL,
+ 0
+ },
+ { "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
+ PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
+ 0
+ },
+ { "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
+ PMAC_TYPE_SILK, heathrow_desktop_features,
+ 0
+ },
+ { "PowerMac1,1", "Blue&White G3",
+ PMAC_TYPE_YOSEMITE, paddington_features,
+ 0
+ },
+ { "PowerMac1,2", "PowerMac G4 PCI Graphics",
+ PMAC_TYPE_YIKES, paddington_features,
+ 0
+ },
+ { "PowerMac2,1", "iMac FireWire",
+ PMAC_TYPE_FW_IMAC, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac2,2", "iMac FireWire",
+ PMAC_TYPE_FW_IMAC, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,1", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,2", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,3", "PowerMac G4 AGP Graphics",
+ PMAC_TYPE_SAWTOOTH, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac3,4", "PowerMac G4 Silver",
+ PMAC_TYPE_QUICKSILVER, core99_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac3,5", "PowerMac G4 Silver",
+ PMAC_TYPE_QUICKSILVER, core99_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac3,6", "PowerMac G4 Windtunnel",
+ PMAC_TYPE_WINDTUNNEL, core99_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac4,1", "iMac \"Flower Power\"",
+ PMAC_TYPE_PANGEA_IMAC, pangea_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac4,2", "Flat panel iMac",
+ PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features,
+ PMAC_MB_CAN_SLEEP
+ },
+ { "PowerMac4,4", "eMac",
+ PMAC_TYPE_EMAC, core99_features,
+ PMAC_MB_MAY_SLEEP
+ },
+ { "PowerMac5,1", "PowerMac G4 Cube",
+ PMAC_TYPE_CUBE, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+ },
+ { "PowerMac6,1", "Flat panel iMac",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac6,3", "Flat panel iMac",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac6,4", "eMac",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP,
+ },
+ { "PowerMac10,1", "Mac mini",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER,
+ },
+ { "iMac,1", "iMac (first generation)",
+ PMAC_TYPE_ORIG_IMAC, paddington_features,
+ 0
+ },
+
+ /*
+ * Xserve's
+ */
+
+ { "RackMac1,1", "XServe",
+ PMAC_TYPE_RACKMAC, rackmac_features,
+ 0,
+ },
+ { "RackMac1,2", "XServe rev. 2",
+ PMAC_TYPE_RACKMAC, rackmac_features,
+ 0,
+ },
+
+ /*
+ * Laptops
+ */
+
+ { "AAPL,3400/2400", "PowerBook 3400",
+ PMAC_TYPE_HOOPER, ohare_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "AAPL,3500", "PowerBook 3500",
+ PMAC_TYPE_KANGA, ohare_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "AAPL,PowerBook1998", "PowerBook Wallstreet",
+ PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "PowerBook1,1", "PowerBook 101 (Lombard)",
+ PMAC_TYPE_101_PBOOK, paddington_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+ },
+ { "PowerBook2,1", "iBook (first generation)",
+ PMAC_TYPE_ORIG_IBOOK, core99_features,
+ PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+ },
+ { "PowerBook2,2", "iBook FireWire",
+ PMAC_TYPE_FW_IBOOK, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+ PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,1", "PowerBook Pismo",
+ PMAC_TYPE_PISMO, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+ PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,2", "PowerBook Titanium",
+ PMAC_TYPE_TITANIUM, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,3", "PowerBook Titanium II",
+ PMAC_TYPE_TITANIUM2, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,4", "PowerBook Titanium III",
+ PMAC_TYPE_TITANIUM3, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook3,5", "PowerBook Titanium IV",
+ PMAC_TYPE_TITANIUM4, core99_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook4,1", "iBook 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook4,2", "iBook 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook4,3", "iBook 2 rev. 2",
+ PMAC_TYPE_IBOOK2, pangea_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+ },
+ { "PowerBook5,1", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,2", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,3", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,4", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,5", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,6", "PowerBook G4 15\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook5,7", "PowerBook G4 17\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,1", "PowerBook G4 12\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,2", "PowerBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,3", "iBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,4", "PowerBook G4 12\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,5", "iBook G4",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+ { "PowerBook6,8", "PowerBook G4 12\"",
+ PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features,
+ PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+ },
+#else /* CONFIG_POWER4 */
+ { "PowerMac7,2", "PowerMac G5",
+ PMAC_TYPE_POWERMAC_G5, g5_features,
+ 0,
+ },
+#ifdef CONFIG_PPC64
+ { "PowerMac7,3", "PowerMac G5",
+ PMAC_TYPE_POWERMAC_G5, g5_features,
+ 0,
+ },
+ { "PowerMac8,1", "iMac G5",
+ PMAC_TYPE_IMAC_G5, g5_features,
+ 0,
+ },
+ { "PowerMac9,1", "PowerMac G5",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
+ { "RackMac3,1", "XServe G5",
+ PMAC_TYPE_XSERVE_G5, g5_features,
+ 0,
+ },
+#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_POWER4 */
+};
+
+/*
+ * The toplevel feature_call callback
+ */
+long pmac_do_feature_call(unsigned int selector, ...)
+{
+ struct device_node *node;
+ long param, value;
+ int i;
+ feature_call func = NULL;
+ va_list args;
+
+ if (pmac_mb.features)
+ for (i=0; pmac_mb.features[i].function; i++)
+ if (pmac_mb.features[i].selector == selector) {
+ func = pmac_mb.features[i].function;
+ break;
+ }
+ if (!func)
+ for (i=0; any_features[i].function; i++)
+ if (any_features[i].selector == selector) {
+ func = any_features[i].function;
+ break;
+ }
+ if (!func)
+ return -ENODEV;
+
+ va_start(args, selector);
+ node = (struct device_node*)va_arg(args, void*);
+ param = va_arg(args, long);
+ value = va_arg(args, long);
+ va_end(args);
+
+ return func(node, param, value);
+}
+
+static int __init probe_motherboard(void)
+{
+ int i;
+ struct macio_chip *macio = &macio_chips[0];
+ const char *model = NULL;
+ struct device_node *dt;
+
+ /* Lookup known motherboard type in device-tree. First try an
+ * exact match on the "model" property, then try a "compatible"
+ * match is none is found.
+ */
+ dt = find_devices("device-tree");
+ if (dt != NULL)
+ model = (const char *) get_property(dt, "model", NULL);
+ for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+ if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
+ pmac_mb = pmac_mb_defs[i];
+ goto found;
+ }
+ }
+ for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+ if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
+ pmac_mb = pmac_mb_defs[i];
+ goto found;
+ }
+ }
+
+ /* Fallback to selection depending on mac-io chip type */
+ switch(macio->type) {
+#ifndef CONFIG_POWER4
+ case macio_grand_central:
+ pmac_mb.model_id = PMAC_TYPE_PSURGE;
+ pmac_mb.model_name = "Unknown PowerSurge";
+ break;
+ case macio_ohare:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
+ pmac_mb.model_name = "Unknown OHare-based";
+ break;
+ case macio_heathrow:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
+ pmac_mb.model_name = "Unknown Heathrow-based";
+ pmac_mb.features = heathrow_desktop_features;
+ break;
+ case macio_paddington:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
+ pmac_mb.model_name = "Unknown Paddington-based";
+ pmac_mb.features = paddington_features;
+ break;
+ case macio_keylargo:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
+ pmac_mb.model_name = "Unknown Keylargo-based";
+ pmac_mb.features = core99_features;
+ break;
+ case macio_pangea:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
+ pmac_mb.model_name = "Unknown Pangea-based";
+ pmac_mb.features = pangea_features;
+ break;
+ case macio_intrepid:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
+ pmac_mb.model_name = "Unknown Intrepid-based";
+ pmac_mb.features = intrepid_features;
+ break;
+#else /* CONFIG_POWER4 */
+ case macio_keylargo2:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
+ pmac_mb.model_name = "Unknown K2-based";
+ pmac_mb.features = g5_features;
+ break;
+#endif /* CONFIG_POWER4 */
+ default:
+ return -ENODEV;
+ }
+found:
+#ifndef CONFIG_POWER4
+ /* Fixup Hooper vs. Comet */
+ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
+ u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
+ if (!mach_id_ptr)
+ return -ENODEV;
+ /* Here, I used to disable the media-bay on comet. It
+ * appears this is wrong, the floppy connector is actually
+ * a kind of media-bay and works with the current driver.
+ */
+ if (__raw_readl(mach_id_ptr) & 0x20000000UL)
+ pmac_mb.model_id = PMAC_TYPE_COMET;
+ iounmap(mach_id_ptr);
+ }
+#endif /* CONFIG_POWER4 */
+
+#ifdef CONFIG_6xx
+ /* Set default value of powersave_nap on machines that support it.
+ * It appears that uninorth rev 3 has a problem with it, we don't
+ * enable it on those. In theory, the flush-on-lock property is
+ * supposed to be set when not supported, but I'm not very confident
+ * that all Apple OF revs did it properly, I do it the paranoid way.
+ */
+ while (uninorth_base && uninorth_rev > 3) {
+ struct device_node *np = find_path_device("/cpus");
+ if (!np || !np->child) {
+ printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
+ break;
+ }
+ np = np->child;
+ /* Nap mode not supported on SMP */
+ if (np->sibling)
+ break;
+ /* Nap mode not supported if flush-on-lock property is present */
+ if (get_property(np, "flush-on-lock", NULL))
+ break;
+ powersave_nap = 1;
+ printk(KERN_INFO "Processor NAP mode on idle enabled.\n");
+ break;
+ }
+
+ /* On CPUs that support it (750FX), lowspeed by default during
+ * NAP mode
+ */
+ powersave_lowspeed = 1;
+#endif /* CONFIG_6xx */
+#ifdef CONFIG_POWER4
+ powersave_nap = 1;
+#endif
+ /* Check for "mobile" machine */
+ if (model && (strncmp(model, "PowerBook", 9) == 0
+ || strncmp(model, "iBook", 5) == 0))
+ pmac_mb.board_flags |= PMAC_MB_MOBILE;
+
+
+ printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
+ return 0;
+}
+
+/* Initialize the Core99 UniNorth host bridge and memory controller
+ */
+static void __init probe_uninorth(void)
+{
+ unsigned long actrl;
+
+ /* Locate core99 Uni-N */
+ uninorth_node = of_find_node_by_name(NULL, "uni-n");
+ /* Locate G5 u3 */
+ if (uninorth_node == NULL) {
+ uninorth_node = of_find_node_by_name(NULL, "u3");
+ uninorth_u3 = 1;
+ }
+ if (uninorth_node && uninorth_node->n_addrs > 0) {
+ unsigned long address = uninorth_node->addrs[0].address;
+ uninorth_base = ioremap(address, 0x40000);
+ uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+ if (uninorth_u3)
+ u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+ } else
+ uninorth_node = NULL;
+
+ if (!uninorth_node)
+ return;
+
+ printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n",
+ uninorth_u3 ? "U3" : "UniNorth", uninorth_rev);
+ printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
+
+ /* Set the arbitrer QAck delay according to what Apple does
+ */
+ if (uninorth_rev < 0x11) {
+ actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
+ actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
+ UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+ UN_OUT(UNI_N_ARB_CTRL, actrl);
+ }
+
+ /* Some more magic as done by them in recent MacOS X on UniNorth
+ * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
+ * memory timeout
+ */
+ if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0)
+ UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
+}
+
+static void __init probe_one_macio(const char *name, const char *compat, int type)
+{
+ struct device_node* node;
+ int i;
+ volatile u32 __iomem * base;
+ u32* revp;
+
+ node = find_devices(name);
+ if (!node || !node->n_addrs)
+ return;
+ if (compat)
+ do {
+ if (device_is_compatible(node, compat))
+ break;
+ node = node->next;
+ } while (node);
+ if (!node)
+ return;
+ for(i=0; i<MAX_MACIO_CHIPS; i++) {
+ if (!macio_chips[i].of_node)
+ break;
+ if (macio_chips[i].of_node == node)
+ return;
+ }
+ if (i >= MAX_MACIO_CHIPS) {
+ printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
+ printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
+ return;
+ }
+ base = ioremap(node->addrs[0].address, node->addrs[0].size);
+ if (!base) {
+ printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
+ return;
+ }
+ if (type == macio_keylargo) {
+ u32 *did = (u32 *)get_property(node, "device-id", NULL);
+ if (*did == 0x00000025)
+ type = macio_pangea;
+ if (*did == 0x0000003e)
+ type = macio_intrepid;
+ }
+ macio_chips[i].of_node = node;
+ macio_chips[i].type = type;
+ macio_chips[i].base = base;
+ macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
+ macio_chips[i].name = macio_names[type];
+ revp = (u32 *)get_property(node, "revision-id", NULL);
+ if (revp)
+ macio_chips[i].rev = *revp;
+ printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
+ macio_names[type], macio_chips[i].rev, macio_chips[i].base);
+}
+
+static int __init
+probe_macios(void)
+{
+ /* Warning, ordering is important */
+ probe_one_macio("gc", NULL, macio_grand_central);
+ probe_one_macio("ohare", NULL, macio_ohare);
+ probe_one_macio("pci106b,7", NULL, macio_ohareII);
+ probe_one_macio("mac-io", "keylargo", macio_keylargo);
+ probe_one_macio("mac-io", "paddington", macio_paddington);
+ probe_one_macio("mac-io", "gatwick", macio_gatwick);
+ probe_one_macio("mac-io", "heathrow", macio_heathrow);
+ probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
+
+ /* Make sure the "main" macio chip appear first */
+ if (macio_chips[0].type == macio_gatwick
+ && macio_chips[1].type == macio_heathrow) {
+ struct macio_chip temp = macio_chips[0];
+ macio_chips[0] = macio_chips[1];
+ macio_chips[1] = temp;
+ }
+ if (macio_chips[0].type == macio_ohareII
+ && macio_chips[1].type == macio_ohare) {
+ struct macio_chip temp = macio_chips[0];
+ macio_chips[0] = macio_chips[1];
+ macio_chips[1] = temp;
+ }
+ macio_chips[0].lbus.index = 0;
+ macio_chips[1].lbus.index = 1;
+
+ return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
+}
+
+static void __init
+initial_serial_shutdown(struct device_node *np)
+{
+ int len;
+ struct slot_names_prop {
+ int count;
+ char name[1];
+ } *slots;
+ char *conn;
+ int port_type = PMAC_SCC_ASYNC;
+ int modem = 0;
+
+ slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ conn = get_property(np, "AAPL,connector", &len);
+ if (conn && (strcmp(conn, "infrared") == 0))
+ port_type = PMAC_SCC_IRDA;
+ else if (device_is_compatible(np, "cobalt"))
+ modem = 1;
+ else if (slots && slots->count > 0) {
+ if (strcmp(slots->name, "IrDA") == 0)
+ port_type = PMAC_SCC_IRDA;
+ else if (strcmp(slots->name, "Modem") == 0)
+ modem = 1;
+ }
+ if (modem)
+ pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
+ pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
+}
+
+static void __init
+set_initial_features(void)
+{
+ struct device_node *np;
+
+ /* That hack appears to be necessary for some StarMax motherboards
+ * but I'm not too sure it was audited for side-effects on other
+ * ohare based machines...
+ * Since I still have difficulties figuring the right way to
+ * differenciate them all and since that hack was there for a long
+ * time, I'll keep it around
+ */
+ if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
+ struct macio_chip *macio = &macio_chips[0];
+ MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+ } else if (macio_chips[0].type == macio_ohare) {
+ struct macio_chip *macio = &macio_chips[0];
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ } else if (macio_chips[1].type == macio_ohare) {
+ struct macio_chip *macio = &macio_chips[1];
+ MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+ }
+
+#ifdef CONFIG_POWER4
+ if (macio_chips[0].type == macio_keylargo2) {
+#ifndef CONFIG_SMP
+ /* On SMP machines running UP, we have the second CPU eating
+ * bus cycles. We need to take it off the bus. This is done
+ * from pmac_smp for SMP kernels running on one CPU
+ */
+ np = of_find_node_by_type(NULL, "cpu");
+ if (np != NULL)
+ np = of_find_node_by_type(np, "cpu");
+ if (np != NULL) {
+ g5_phy_disable_cpu1();
+ of_node_put(np);
+ }
+#endif /* CONFIG_SMP */
+ /* Enable GMAC for now for PCI probing. It will be disabled
+ * later on after PCI probe
+ */
+ np = of_find_node_by_name(NULL, "ethernet");
+ while(np) {
+ if (device_is_compatible(np, "K2-GMAC"))
+ g5_gmac_enable(np, 0, 1);
+ np = of_find_node_by_name(np, "ethernet");
+ }
+
+ /* Enable FW before PCI probe. Will be disabled later on
+ * Note: We should have a batter way to check that we are
+ * dealing with uninorth internal cell and not a PCI cell
+ * on the external PCI. The code below works though.
+ */
+ np = of_find_node_by_name(NULL, "firewire");
+ while(np) {
+ if (device_is_compatible(np, "pci106b,5811")) {
+ macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+ g5_fw_enable(np, 0, 1);
+ }
+ np = of_find_node_by_name(np, "firewire");
+ }
+ }
+#else /* CONFIG_POWER4 */
+
+ if (macio_chips[0].type == macio_keylargo ||
+ macio_chips[0].type == macio_pangea ||
+ macio_chips[0].type == macio_intrepid) {
+ /* Enable GMAC for now for PCI probing. It will be disabled
+ * later on after PCI probe
+ */
+ np = of_find_node_by_name(NULL, "ethernet");
+ while(np) {
+ if (np->parent
+ && device_is_compatible(np->parent, "uni-north")
+ && device_is_compatible(np, "gmac"))
+ core99_gmac_enable(np, 0, 1);
+ np = of_find_node_by_name(np, "ethernet");
+ }
+
+ /* Enable FW before PCI probe. Will be disabled later on
+ * Note: We should have a batter way to check that we are
+ * dealing with uninorth internal cell and not a PCI cell
+ * on the external PCI. The code below works though.
+ */
+ np = of_find_node_by_name(NULL, "firewire");
+ while(np) {
+ if (np->parent
+ && device_is_compatible(np->parent, "uni-north")
+ && (device_is_compatible(np, "pci106b,18") ||
+ device_is_compatible(np, "pci106b,30") ||
+ device_is_compatible(np, "pci11c1,5811"))) {
+ macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+ core99_firewire_enable(np, 0, 1);
+ }
+ np = of_find_node_by_name(np, "firewire");
+ }
+
+ /* Enable ATA-100 before PCI probe. */
+ np = of_find_node_by_name(NULL, "ata-6");
+ while(np) {
+ if (np->parent
+ && device_is_compatible(np->parent, "uni-north")
+ && device_is_compatible(np, "kauai-ata")) {
+ core99_ata100_enable(np, 1);
+ }
+ np = of_find_node_by_name(np, "ata-6");
+ }
+
+ /* Switch airport off */
+ np = find_devices("radio");
+ while(np) {
+ if (np && np->parent == macio_chips[0].of_node) {
+ macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
+ core99_airport_enable(np, 0, 0);
+ }
+ np = np->next;
+ }
+ }
+
+ /* On all machines that support sound PM, switch sound off */
+ if (macio_chips[0].of_node)
+ pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
+ macio_chips[0].of_node, 0, 0);
+
+ /* While on some desktop G3s, we turn it back on */
+ if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
+ && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
+ pmac_mb.model_id == PMAC_TYPE_SILK)) {
+ struct macio_chip *macio = &macio_chips[0];
+ MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+ MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+ }
+
+ /* Some machine models need the clock chip to be properly setup for
+ * clock spreading now. This should be a platform function but we
+ * don't do these at the moment
+ */
+ pmac_tweak_clock_spreading(1);
+
+#endif /* CONFIG_POWER4 */
+
+ /* On all machines, switch modem & serial ports off */
+ np = find_devices("ch-a");
+ while(np) {
+ initial_serial_shutdown(np);
+ np = np->next;
+ }
+ np = find_devices("ch-b");
+ while(np) {
+ initial_serial_shutdown(np);
+ np = np->next;
+ }
+}
+
+void __init
+pmac_feature_init(void)
+{
+ /* Detect the UniNorth memory controller */
+ probe_uninorth();
+
+ /* Probe mac-io controllers */
+ if (probe_macios()) {
+ printk(KERN_WARNING "No mac-io chip found\n");
+ return;
+ }
+
+ /* Setup low-level i2c stuffs */
+ pmac_init_low_i2c();
+
+ /* Probe machine type */
+ if (probe_motherboard())
+ printk(KERN_WARNING "Unknown PowerMac !\n");
+
+ /* Set some initial features (turn off some chips that will
+ * be later turned on)
+ */
+ set_initial_features();
+}
+
+int __init pmac_feature_late_init(void)
+{
+#if 0
+ struct device_node *np;
+
+ /* Request some resources late */
+ if (uninorth_node)
+ request_OF_resource(uninorth_node, 0, NULL);
+ np = find_devices("hammerhead");
+ if (np)
+ request_OF_resource(np, 0, NULL);
+ np = find_devices("interrupt-controller");
+ if (np)
+ request_OF_resource(np, 0, NULL);
+#endif
+ return 0;
+}
+
+device_initcall(pmac_feature_late_init);
+
+#if 0
+static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
+{
+ int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
+ int bits[8] = { 8,16,0,32,2,4,0,0 };
+ int freq = (frq >> 8) & 0xf;
+
+ if (freqs[freq] == 0)
+ printk("%s: Unknown HT link frequency %x\n", name, freq);
+ else
+ printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
+ name, freqs[freq],
+ bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
+}
+
+void __init pmac_check_ht_link(void)
+{
+#if 0 /* Disabled for now */
+ u32 ufreq, freq, ucfg, cfg;
+ struct device_node *pcix_node;
+ u8 px_bus, px_devfn;
+ struct pci_controller *px_hose;
+
+ (void)in_be32(u3_ht + U3_HT_LINK_COMMAND);
+ ucfg = cfg = in_be32(u3_ht + U3_HT_LINK_CONFIG);
+ ufreq = freq = in_be32(u3_ht + U3_HT_LINK_FREQ);
+ dump_HT_speeds("U3 HyperTransport", cfg, freq);
+
+ pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
+ if (pcix_node == NULL) {
+ printk("No PCI-X bridge found\n");
+ return;
+ }
+ if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
+ printk("PCI-X bridge found but not matched to pci\n");
+ return;
+ }
+ px_hose = pci_find_hose_for_OF_device(pcix_node);
+ if (px_hose == NULL) {
+ printk("PCI-X bridge found but not matched to host\n");
+ return;
+ }
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
+ dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
+ early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
+ dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
+#endif
+}
+
+#endif /* CONFIG_POWER4 */
+
+/*
+ * Early video resume hook
+ */
+
+static void (*pmac_early_vresume_proc)(void *data);
+static void *pmac_early_vresume_data;
+
+void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
+{
+ if (_machine != _MACH_Pmac)
+ return;
+ preempt_disable();
+ pmac_early_vresume_proc = proc;
+ pmac_early_vresume_data = data;
+ preempt_enable();
+}
+EXPORT_SYMBOL(pmac_set_early_video_resume);
+
+void pmac_call_early_video_resume(void)
+{
+ if (pmac_early_vresume_proc)
+ pmac_early_vresume_proc(pmac_early_vresume_data);
+}
+
+/*
+ * AGP related suspend/resume code
+ */
+
+static struct pci_dev *pmac_agp_bridge;
+static int (*pmac_agp_suspend)(struct pci_dev *bridge);
+static int (*pmac_agp_resume)(struct pci_dev *bridge);
+
+void pmac_register_agp_pm(struct pci_dev *bridge,
+ int (*suspend)(struct pci_dev *bridge),
+ int (*resume)(struct pci_dev *bridge))
+{
+ if (suspend || resume) {
+ pmac_agp_bridge = bridge;
+ pmac_agp_suspend = suspend;
+ pmac_agp_resume = resume;
+ return;
+ }
+ if (bridge != pmac_agp_bridge)
+ return;
+ pmac_agp_suspend = pmac_agp_resume = NULL;
+ return;
+}
+EXPORT_SYMBOL(pmac_register_agp_pm);
+
+void pmac_suspend_agp_for_card(struct pci_dev *dev)
+{
+ if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
+ return;
+ if (pmac_agp_bridge->bus != dev->bus)
+ return;
+ pmac_agp_suspend(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_suspend_agp_for_card);
+
+void pmac_resume_agp_for_card(struct pci_dev *dev)
+{
+ if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
+ return;
+ if (pmac_agp_bridge->bus != dev->bus)
+ return;
+ pmac_agp_resume(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_resume_agp_for_card);
diff --git a/arch/powerpc/platforms/powermac/pmac_low_i2c.c b/arch/powerpc/platforms/powermac/pmac_low_i2c.c
new file mode 100644
index 0000000..f3f39e8
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_low_i2c.c
@@ -0,0 +1,523 @@
+/*
+ * arch/ppc/platforms/pmac_low_i2c.c
+ *
+ * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file contains some low-level i2c access routines that
+ * need to be used by various bits of the PowerMac platform code
+ * at times where the real asynchronous & interrupt driven driver
+ * cannot be used. The API borrows some semantics from the darwin
+ * driver in order to ease the implementation of the platform
+ * properties parser
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <asm/keylargo.h>
+#include <asm/uninorth.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_low_i2c.h>
+
+#define MAX_LOW_I2C_HOST 4
+
+#ifdef DEBUG
+#define DBG(x...) do {\
+ printk(KERN_DEBUG "KW:" x); \
+ } while(0)
+#else
+#define DBG(x...)
+#endif
+
+struct low_i2c_host;
+
+typedef int (*low_i2c_func_t)(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len);
+
+struct low_i2c_host
+{
+ struct device_node *np; /* OF device node */
+ struct semaphore mutex; /* Access mutex for use by i2c-keywest */
+ low_i2c_func_t func; /* Access function */
+ unsigned int is_open : 1; /* Poor man's access control */
+ int mode; /* Current mode */
+ int channel; /* Current channel */
+ int num_channels; /* Number of channels */
+ void __iomem *base; /* For keywest-i2c, base address */
+ int bsteps; /* And register stepping */
+ int speed; /* And speed */
+};
+
+static struct low_i2c_host low_i2c_hosts[MAX_LOW_I2C_HOST];
+
+/* No locking is necessary on allocation, we are running way before
+ * anything can race with us
+ */
+static struct low_i2c_host *find_low_i2c_host(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < MAX_LOW_I2C_HOST; i++)
+ if (low_i2c_hosts[i].np == np)
+ return &low_i2c_hosts[i];
+ return NULL;
+}
+
+/*
+ *
+ * i2c-keywest implementation (UniNorth, U2, U3, Keylargo's)
+ *
+ */
+
+/*
+ * Keywest i2c definitions borrowed from drivers/i2c/i2c-keywest.h,
+ * should be moved somewhere in include/asm-ppc/
+ */
+/* Register indices */
+typedef enum {
+ reg_mode = 0,
+ reg_control,
+ reg_status,
+ reg_isr,
+ reg_ier,
+ reg_addr,
+ reg_subaddr,
+ reg_data
+} reg_t;
+
+
+/* Mode register */
+#define KW_I2C_MODE_100KHZ 0x00
+#define KW_I2C_MODE_50KHZ 0x01
+#define KW_I2C_MODE_25KHZ 0x02
+#define KW_I2C_MODE_DUMB 0x00
+#define KW_I2C_MODE_STANDARD 0x04
+#define KW_I2C_MODE_STANDARDSUB 0x08
+#define KW_I2C_MODE_COMBINED 0x0C
+#define KW_I2C_MODE_MODE_MASK 0x0C
+#define KW_I2C_MODE_CHAN_MASK 0xF0
+
+/* Control register */
+#define KW_I2C_CTL_AAK 0x01
+#define KW_I2C_CTL_XADDR 0x02
+#define KW_I2C_CTL_STOP 0x04
+#define KW_I2C_CTL_START 0x08
+
+/* Status register */
+#define KW_I2C_STAT_BUSY 0x01
+#define KW_I2C_STAT_LAST_AAK 0x02
+#define KW_I2C_STAT_LAST_RW 0x04
+#define KW_I2C_STAT_SDA 0x08
+#define KW_I2C_STAT_SCL 0x10
+
+/* IER & ISR registers */
+#define KW_I2C_IRQ_DATA 0x01
+#define KW_I2C_IRQ_ADDR 0x02
+#define KW_I2C_IRQ_STOP 0x04
+#define KW_I2C_IRQ_START 0x08
+#define KW_I2C_IRQ_MASK 0x0F
+
+/* State machine states */
+enum {
+ state_idle,
+ state_addr,
+ state_read,
+ state_write,
+ state_stop,
+ state_dead
+};
+
+#define WRONG_STATE(name) do {\
+ printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s (isr: %02x)\n", \
+ name, __kw_state_names[state], isr); \
+ } while(0)
+
+static const char *__kw_state_names[] = {
+ "state_idle",
+ "state_addr",
+ "state_read",
+ "state_write",
+ "state_stop",
+ "state_dead"
+};
+
+static inline u8 __kw_read_reg(struct low_i2c_host *host, reg_t reg)
+{
+ return readb(host->base + (((unsigned int)reg) << host->bsteps));
+}
+
+static inline void __kw_write_reg(struct low_i2c_host *host, reg_t reg, u8 val)
+{
+ writeb(val, host->base + (((unsigned)reg) << host->bsteps));
+ (void)__kw_read_reg(host, reg_subaddr);
+}
+
+#define kw_write_reg(reg, val) __kw_write_reg(host, reg, val)
+#define kw_read_reg(reg) __kw_read_reg(host, reg)
+
+
+/* Don't schedule, the g5 fan controller is too
+ * timing sensitive
+ */
+static u8 kw_wait_interrupt(struct low_i2c_host* host)
+{
+ int i, j;
+ u8 isr;
+
+ for (i = 0; i < 100000; i++) {
+ isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
+ if (isr != 0)
+ return isr;
+
+ /* This code is used with the timebase frozen, we cannot rely
+ * on udelay ! For now, just use a bogus loop
+ */
+ for (j = 1; j < 10000; j++)
+ mb();
+ }
+ return isr;
+}
+
+static int kw_handle_interrupt(struct low_i2c_host *host, int state, int rw, int *rc, u8 **data, int *len, u8 isr)
+{
+ u8 ack;
+
+ DBG("kw_handle_interrupt(%s, isr: %x)\n", __kw_state_names[state], isr);
+
+ if (isr == 0) {
+ if (state != state_stop) {
+ DBG("KW: Timeout !\n");
+ *rc = -EIO;
+ goto stop;
+ }
+ if (state == state_stop) {
+ ack = kw_read_reg(reg_status);
+ if (!(ack & KW_I2C_STAT_BUSY)) {
+ state = state_idle;
+ kw_write_reg(reg_ier, 0x00);
+ }
+ }
+ return state;
+ }
+
+ if (isr & KW_I2C_IRQ_ADDR) {
+ ack = kw_read_reg(reg_status);
+ if (state != state_addr) {
+ kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
+ WRONG_STATE("KW_I2C_IRQ_ADDR");
+ *rc = -EIO;
+ goto stop;
+ }
+ if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+ *rc = -ENODEV;
+ DBG("KW: NAK on address\n");
+ return state_stop;
+ } else {
+ if (rw) {
+ state = state_read;
+ if (*len > 1)
+ kw_write_reg(reg_control, KW_I2C_CTL_AAK);
+ } else {
+ state = state_write;
+ kw_write_reg(reg_data, **data);
+ (*data)++; (*len)--;
+ }
+ }
+ kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
+ }
+
+ if (isr & KW_I2C_IRQ_DATA) {
+ if (state == state_read) {
+ **data = kw_read_reg(reg_data);
+ (*data)++; (*len)--;
+ kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
+ if ((*len) == 0)
+ state = state_stop;
+ else if ((*len) == 1)
+ kw_write_reg(reg_control, 0);
+ } else if (state == state_write) {
+ ack = kw_read_reg(reg_status);
+ if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
+ DBG("KW: nack on data write\n");
+ *rc = -EIO;
+ goto stop;
+ } else if (*len) {
+ kw_write_reg(reg_data, **data);
+ (*data)++; (*len)--;
+ } else {
+ kw_write_reg(reg_control, KW_I2C_CTL_STOP);
+ state = state_stop;
+ *rc = 0;
+ }
+ kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
+ } else {
+ kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
+ WRONG_STATE("KW_I2C_IRQ_DATA");
+ if (state != state_stop) {
+ *rc = -EIO;
+ goto stop;
+ }
+ }
+ }
+
+ if (isr & KW_I2C_IRQ_STOP) {
+ kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
+ if (state != state_stop) {
+ WRONG_STATE("KW_I2C_IRQ_STOP");
+ *rc = -EIO;
+ }
+ return state_idle;
+ }
+
+ if (isr & KW_I2C_IRQ_START)
+ kw_write_reg(reg_isr, KW_I2C_IRQ_START);
+
+ return state;
+
+ stop:
+ kw_write_reg(reg_control, KW_I2C_CTL_STOP);
+ return state_stop;
+}
+
+static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, u8 *data, int len)
+{
+ u8 mode_reg = host->speed;
+ int state = state_addr;
+ int rc = 0;
+
+ /* Setup mode & subaddress if any */
+ switch(host->mode) {
+ case pmac_low_i2c_mode_dumb:
+ printk(KERN_ERR "low_i2c: Dumb mode not supported !\n");
+ return -EINVAL;
+ case pmac_low_i2c_mode_std:
+ mode_reg |= KW_I2C_MODE_STANDARD;
+ break;
+ case pmac_low_i2c_mode_stdsub:
+ mode_reg |= KW_I2C_MODE_STANDARDSUB;
+ break;
+ case pmac_low_i2c_mode_combined:
+ mode_reg |= KW_I2C_MODE_COMBINED;
+ break;
+ }
+
+ /* Setup channel & clear pending irqs */
+ kw_write_reg(reg_isr, kw_read_reg(reg_isr));
+ kw_write_reg(reg_mode, mode_reg | (host->channel << 4));
+ kw_write_reg(reg_status, 0);
+
+ /* Set up address and r/w bit */
+ kw_write_reg(reg_addr, addr);
+
+ /* Set up the sub address */
+ if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
+ || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
+ kw_write_reg(reg_subaddr, subaddr);
+
+ /* Start sending address & disable interrupt*/
+ kw_write_reg(reg_ier, 0 /*KW_I2C_IRQ_MASK*/);
+ kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
+
+ /* State machine, to turn into an interrupt handler */
+ while(state != state_idle) {
+ u8 isr = kw_wait_interrupt(host);
+ state = kw_handle_interrupt(host, state, addr & 1, &rc, &data, &len, isr);
+ }
+
+ return rc;
+}
+
+static void keywest_low_i2c_add(struct device_node *np)
+{
+ struct low_i2c_host *host = find_low_i2c_host(NULL);
+ u32 *psteps, *prate, steps, aoffset = 0;
+ struct device_node *parent;
+
+ if (host == NULL) {
+ printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
+ np->full_name);
+ return;
+ }
+ memset(host, 0, sizeof(*host));
+
+ init_MUTEX(&host->mutex);
+ host->np = of_node_get(np);
+ psteps = (u32 *)get_property(np, "AAPL,address-step", NULL);
+ steps = psteps ? (*psteps) : 0x10;
+ for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
+ steps >>= 1;
+ parent = of_get_parent(np);
+ host->num_channels = 1;
+ if (parent && parent->name[0] == 'u') {
+ host->num_channels = 2;
+ aoffset = 3;
+ }
+ /* Select interface rate */
+ host->speed = KW_I2C_MODE_100KHZ;
+ prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL);
+ if (prate) switch(*prate) {
+ case 100:
+ host->speed = KW_I2C_MODE_100KHZ;
+ break;
+ case 50:
+ host->speed = KW_I2C_MODE_50KHZ;
+ break;
+ case 25:
+ host->speed = KW_I2C_MODE_25KHZ;
+ break;
+ }
+
+ host->mode = pmac_low_i2c_mode_std;
+ host->base = ioremap(np->addrs[0].address + aoffset,
+ np->addrs[0].size);
+ host->func = keywest_low_i2c_func;
+}
+
+/*
+ *
+ * PMU implementation
+ *
+ */
+
+
+#ifdef CONFIG_ADB_PMU
+
+static int pmu_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 sub, u8 *data, int len)
+{
+ // TODO
+ return -ENODEV;
+}
+
+static void pmu_low_i2c_add(struct device_node *np)
+{
+ struct low_i2c_host *host = find_low_i2c_host(NULL);
+
+ if (host == NULL) {
+ printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
+ np->full_name);
+ return;
+ }
+ memset(host, 0, sizeof(*host));
+
+ init_MUTEX(&host->mutex);
+ host->np = of_node_get(np);
+ host->num_channels = 3;
+ host->mode = pmac_low_i2c_mode_std;
+ host->func = pmu_low_i2c_func;
+}
+
+#endif /* CONFIG_ADB_PMU */
+
+void __init pmac_init_low_i2c(void)
+{
+ struct device_node *np;
+
+ /* Probe keywest-i2c busses */
+ np = of_find_compatible_node(NULL, "i2c", "keywest-i2c");
+ while(np) {
+ keywest_low_i2c_add(np);
+ np = of_find_compatible_node(np, "i2c", "keywest-i2c");
+ }
+
+#ifdef CONFIG_ADB_PMU
+ /* Probe PMU busses */
+ np = of_find_node_by_name(NULL, "via-pmu");
+ if (np)
+ pmu_low_i2c_add(np);
+#endif /* CONFIG_ADB_PMU */
+
+ /* TODO: Add CUDA support as well */
+}
+
+int pmac_low_i2c_lock(struct device_node *np)
+{
+ struct low_i2c_host *host = find_low_i2c_host(np);
+
+ if (!host)
+ return -ENODEV;
+ down(&host->mutex);
+ return 0;
+}
+EXPORT_SYMBOL(pmac_low_i2c_lock);
+
+int pmac_low_i2c_unlock(struct device_node *np)
+{
+ struct low_i2c_host *host = find_low_i2c_host(np);
+
+ if (!host)
+ return -ENODEV;
+ up(&host->mutex);
+ return 0;
+}
+EXPORT_SYMBOL(pmac_low_i2c_unlock);
+
+
+int pmac_low_i2c_open(struct device_node *np, int channel)
+{
+ struct low_i2c_host *host = find_low_i2c_host(np);
+
+ if (!host)
+ return -ENODEV;
+
+ if (channel >= host->num_channels)
+ return -EINVAL;
+
+ down(&host->mutex);
+ host->is_open = 1;
+ host->channel = channel;
+
+ return 0;
+}
+EXPORT_SYMBOL(pmac_low_i2c_open);
+
+int pmac_low_i2c_close(struct device_node *np)
+{
+ struct low_i2c_host *host = find_low_i2c_host(np);
+
+ if (!host)
+ return -ENODEV;
+
+ host->is_open = 0;
+ up(&host->mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL(pmac_low_i2c_close);
+
+int pmac_low_i2c_setmode(struct device_node *np, int mode)
+{
+ struct low_i2c_host *host = find_low_i2c_host(np);
+
+ if (!host)
+ return -ENODEV;
+ WARN_ON(!host->is_open);
+ host->mode = mode;
+
+ return 0;
+}
+EXPORT_SYMBOL(pmac_low_i2c_setmode);
+
+int pmac_low_i2c_xfer(struct device_node *np, u8 addrdir, u8 subaddr, u8 *data, int len)
+{
+ struct low_i2c_host *host = find_low_i2c_host(np);
+
+ if (!host)
+ return -ENODEV;
+ WARN_ON(!host->is_open);
+
+ return host->func(host, addrdir, subaddr, data, len);
+}
+EXPORT_SYMBOL(pmac_low_i2c_xfer);
+
diff --git a/arch/powerpc/platforms/powermac/pmac_nvram.c b/arch/powerpc/platforms/powermac/pmac_nvram.c
new file mode 100644
index 0000000..8c9b008
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_nvram.c
@@ -0,0 +1,584 @@
+/*
+ * arch/ppc/platforms/pmac_nvram.c
+ *
+ * Copyright (C) 2002 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Todo: - add support for the OF persistent properties
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
+#include <linux/nvram.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/bootmem.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/nvram.h>
+
+#define DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define NVRAM_SIZE 0x2000 /* 8kB of non-volatile RAM */
+
+#define CORE99_SIGNATURE 0x5a
+#define CORE99_ADLER_START 0x14
+
+/* On Core99, nvram is either a sharp, a micron or an AMD flash */
+#define SM_FLASH_STATUS_DONE 0x80
+#define SM_FLASH_STATUS_ERR 0x38
+#define SM_FLASH_CMD_ERASE_CONFIRM 0xd0
+#define SM_FLASH_CMD_ERASE_SETUP 0x20
+#define SM_FLASH_CMD_RESET 0xff
+#define SM_FLASH_CMD_WRITE_SETUP 0x40
+#define SM_FLASH_CMD_CLEAR_STATUS 0x50
+#define SM_FLASH_CMD_READ_STATUS 0x70
+
+/* CHRP NVRAM header */
+struct chrp_header {
+ u8 signature;
+ u8 cksum;
+ u16 len;
+ char name[12];
+ u8 data[0];
+};
+
+struct core99_header {
+ struct chrp_header hdr;
+ u32 adler;
+ u32 generation;
+ u32 reserved[2];
+};
+
+/*
+ * Read and write the non-volatile RAM on PowerMacs and CHRP machines.
+ */
+static int nvram_naddrs;
+static volatile unsigned char *nvram_addr;
+static volatile unsigned char *nvram_data;
+static int nvram_mult, is_core_99;
+static int core99_bank = 0;
+static int nvram_partitions[3];
+static DEFINE_SPINLOCK(nv_lock);
+
+extern int pmac_newworld;
+extern int system_running;
+
+static int (*core99_write_bank)(int bank, u8* datas);
+static int (*core99_erase_bank)(int bank);
+
+static char *nvram_image;
+
+
+static unsigned char core99_nvram_read_byte(int addr)
+{
+ if (nvram_image == NULL)
+ return 0xff;
+ return nvram_image[addr];
+}
+
+static void core99_nvram_write_byte(int addr, unsigned char val)
+{
+ if (nvram_image == NULL)
+ return;
+ nvram_image[addr] = val;
+}
+
+
+static unsigned char direct_nvram_read_byte(int addr)
+{
+ return in_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult]);
+}
+
+static void direct_nvram_write_byte(int addr, unsigned char val)
+{
+ out_8(&nvram_data[(addr & (NVRAM_SIZE - 1)) * nvram_mult], val);
+}
+
+
+static unsigned char indirect_nvram_read_byte(int addr)
+{
+ unsigned char val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&nv_lock, flags);
+ out_8(nvram_addr, addr >> 5);
+ val = in_8(&nvram_data[(addr & 0x1f) << 4]);
+ spin_unlock_irqrestore(&nv_lock, flags);
+
+ return val;
+}
+
+static void indirect_nvram_write_byte(int addr, unsigned char val)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nv_lock, flags);
+ out_8(nvram_addr, addr >> 5);
+ out_8(&nvram_data[(addr & 0x1f) << 4], val);
+ spin_unlock_irqrestore(&nv_lock, flags);
+}
+
+
+#ifdef CONFIG_ADB_PMU
+
+static void pmu_nvram_complete(struct adb_request *req)
+{
+ if (req->arg)
+ complete((struct completion *)req->arg);
+}
+
+static unsigned char pmu_nvram_read_byte(int addr)
+{
+ struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL;
+ if (pmu_request(&req, pmu_nvram_complete, 3, PMU_READ_NVRAM,
+ (addr >> 8) & 0xff, addr & 0xff))
+ return 0xff;
+ if (system_state == SYSTEM_RUNNING)
+ wait_for_completion(&req_complete);
+ while (!req.complete)
+ pmu_poll();
+ return req.reply[0];
+}
+
+static void pmu_nvram_write_byte(int addr, unsigned char val)
+{
+ struct adb_request req;
+ DECLARE_COMPLETION(req_complete);
+
+ req.arg = system_state == SYSTEM_RUNNING ? &req_complete : NULL;
+ if (pmu_request(&req, pmu_nvram_complete, 4, PMU_WRITE_NVRAM,
+ (addr >> 8) & 0xff, addr & 0xff, val))
+ return;
+ if (system_state == SYSTEM_RUNNING)
+ wait_for_completion(&req_complete);
+ while (!req.complete)
+ pmu_poll();
+}
+
+#endif /* CONFIG_ADB_PMU */
+
+
+static u8 chrp_checksum(struct chrp_header* hdr)
+{
+ u8 *ptr;
+ u16 sum = hdr->signature;
+ for (ptr = (u8 *)&hdr->len; ptr < hdr->data; ptr++)
+ sum += *ptr;
+ while (sum > 0xFF)
+ sum = (sum & 0xFF) + (sum>>8);
+ return sum;
+}
+
+static u32 core99_calc_adler(u8 *buffer)
+{
+ int cnt;
+ u32 low, high;
+
+ buffer += CORE99_ADLER_START;
+ low = 1;
+ high = 0;
+ for (cnt=0; cnt<(NVRAM_SIZE-CORE99_ADLER_START); cnt++) {
+ if ((cnt % 5000) == 0) {
+ high %= 65521UL;
+ high %= 65521UL;
+ }
+ low += buffer[cnt];
+ high += low;
+ }
+ low %= 65521UL;
+ high %= 65521UL;
+
+ return (high << 16) | low;
+}
+
+static u32 core99_check(u8* datas)
+{
+ struct core99_header* hdr99 = (struct core99_header*)datas;
+
+ if (hdr99->hdr.signature != CORE99_SIGNATURE) {
+ DBG("Invalid signature\n");
+ return 0;
+ }
+ if (hdr99->hdr.cksum != chrp_checksum(&hdr99->hdr)) {
+ DBG("Invalid checksum\n");
+ return 0;
+ }
+ if (hdr99->adler != core99_calc_adler(datas)) {
+ DBG("Invalid adler\n");
+ return 0;
+ }
+ return hdr99->generation;
+}
+
+static int sm_erase_bank(int bank)
+{
+ int stat, i;
+ unsigned long timeout;
+
+ u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+
+ DBG("nvram: Sharp/Micron Erasing bank %d...\n", bank);
+
+ out_8(base, SM_FLASH_CMD_ERASE_SETUP);
+ out_8(base, SM_FLASH_CMD_ERASE_CONFIRM);
+ timeout = 0;
+ do {
+ if (++timeout > 1000000) {
+ printk(KERN_ERR "nvram: Sharp/Miron flash erase timeout !\n");
+ break;
+ }
+ out_8(base, SM_FLASH_CMD_READ_STATUS);
+ stat = in_8(base);
+ } while (!(stat & SM_FLASH_STATUS_DONE));
+
+ out_8(base, SM_FLASH_CMD_CLEAR_STATUS);
+ out_8(base, SM_FLASH_CMD_RESET);
+
+ for (i=0; i<NVRAM_SIZE; i++)
+ if (base[i] != 0xff) {
+ printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n");
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int sm_write_bank(int bank, u8* datas)
+{
+ int i, stat = 0;
+ unsigned long timeout;
+
+ u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+
+ DBG("nvram: Sharp/Micron Writing bank %d...\n", bank);
+
+ for (i=0; i<NVRAM_SIZE; i++) {
+ out_8(base+i, SM_FLASH_CMD_WRITE_SETUP);
+ udelay(1);
+ out_8(base+i, datas[i]);
+ timeout = 0;
+ do {
+ if (++timeout > 1000000) {
+ printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n");
+ break;
+ }
+ out_8(base, SM_FLASH_CMD_READ_STATUS);
+ stat = in_8(base);
+ } while (!(stat & SM_FLASH_STATUS_DONE));
+ if (!(stat & SM_FLASH_STATUS_DONE))
+ break;
+ }
+ out_8(base, SM_FLASH_CMD_CLEAR_STATUS);
+ out_8(base, SM_FLASH_CMD_RESET);
+ for (i=0; i<NVRAM_SIZE; i++)
+ if (base[i] != datas[i]) {
+ printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n");
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int amd_erase_bank(int bank)
+{
+ int i, stat = 0;
+ unsigned long timeout;
+
+ u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+
+ DBG("nvram: AMD Erasing bank %d...\n", bank);
+
+ /* Unlock 1 */
+ out_8(base+0x555, 0xaa);
+ udelay(1);
+ /* Unlock 2 */
+ out_8(base+0x2aa, 0x55);
+ udelay(1);
+
+ /* Sector-Erase */
+ out_8(base+0x555, 0x80);
+ udelay(1);
+ out_8(base+0x555, 0xaa);
+ udelay(1);
+ out_8(base+0x2aa, 0x55);
+ udelay(1);
+ out_8(base, 0x30);
+ udelay(1);
+
+ timeout = 0;
+ do {
+ if (++timeout > 1000000) {
+ printk(KERN_ERR "nvram: AMD flash erase timeout !\n");
+ break;
+ }
+ stat = in_8(base) ^ in_8(base);
+ } while (stat != 0);
+
+ /* Reset */
+ out_8(base, 0xf0);
+ udelay(1);
+
+ for (i=0; i<NVRAM_SIZE; i++)
+ if (base[i] != 0xff) {
+ printk(KERN_ERR "nvram: AMD flash erase failed !\n");
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static int amd_write_bank(int bank, u8* datas)
+{
+ int i, stat = 0;
+ unsigned long timeout;
+
+ u8* base = (u8 *)nvram_data + core99_bank*NVRAM_SIZE;
+
+ DBG("nvram: AMD Writing bank %d...\n", bank);
+
+ for (i=0; i<NVRAM_SIZE; i++) {
+ /* Unlock 1 */
+ out_8(base+0x555, 0xaa);
+ udelay(1);
+ /* Unlock 2 */
+ out_8(base+0x2aa, 0x55);
+ udelay(1);
+
+ /* Write single word */
+ out_8(base+0x555, 0xa0);
+ udelay(1);
+ out_8(base+i, datas[i]);
+
+ timeout = 0;
+ do {
+ if (++timeout > 1000000) {
+ printk(KERN_ERR "nvram: AMD flash write timeout !\n");
+ break;
+ }
+ stat = in_8(base) ^ in_8(base);
+ } while (stat != 0);
+ if (stat != 0)
+ break;
+ }
+
+ /* Reset */
+ out_8(base, 0xf0);
+ udelay(1);
+
+ for (i=0; i<NVRAM_SIZE; i++)
+ if (base[i] != datas[i]) {
+ printk(KERN_ERR "nvram: AMD flash write failed !\n");
+ return -ENXIO;
+ }
+ return 0;
+}
+
+static void __init lookup_partitions(void)
+{
+ u8 buffer[17];
+ int i, offset;
+ struct chrp_header* hdr;
+
+ if (pmac_newworld) {
+ nvram_partitions[pmac_nvram_OF] = -1;
+ nvram_partitions[pmac_nvram_XPRAM] = -1;
+ nvram_partitions[pmac_nvram_NR] = -1;
+ hdr = (struct chrp_header *)buffer;
+
+ offset = 0;
+ buffer[16] = 0;
+ do {
+ for (i=0;i<16;i++)
+ buffer[i] = nvram_read_byte(offset+i);
+ if (!strcmp(hdr->name, "common"))
+ nvram_partitions[pmac_nvram_OF] = offset + 0x10;
+ if (!strcmp(hdr->name, "APL,MacOS75")) {
+ nvram_partitions[pmac_nvram_XPRAM] = offset + 0x10;
+ nvram_partitions[pmac_nvram_NR] = offset + 0x110;
+ }
+ offset += (hdr->len * 0x10);
+ } while(offset < NVRAM_SIZE);
+ } else {
+ nvram_partitions[pmac_nvram_OF] = 0x1800;
+ nvram_partitions[pmac_nvram_XPRAM] = 0x1300;
+ nvram_partitions[pmac_nvram_NR] = 0x1400;
+ }
+ DBG("nvram: OF partition at 0x%x\n", nvram_partitions[pmac_nvram_OF]);
+ DBG("nvram: XP partition at 0x%x\n", nvram_partitions[pmac_nvram_XPRAM]);
+ DBG("nvram: NR partition at 0x%x\n", nvram_partitions[pmac_nvram_NR]);
+}
+
+static void core99_nvram_sync(void)
+{
+ struct core99_header* hdr99;
+ unsigned long flags;
+
+ if (!is_core_99 || !nvram_data || !nvram_image)
+ return;
+
+ spin_lock_irqsave(&nv_lock, flags);
+ if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE,
+ NVRAM_SIZE))
+ goto bail;
+
+ DBG("Updating nvram...\n");
+
+ hdr99 = (struct core99_header*)nvram_image;
+ hdr99->generation++;
+ hdr99->hdr.signature = CORE99_SIGNATURE;
+ hdr99->hdr.cksum = chrp_checksum(&hdr99->hdr);
+ hdr99->adler = core99_calc_adler(nvram_image);
+ core99_bank = core99_bank ? 0 : 1;
+ if (core99_erase_bank)
+ if (core99_erase_bank(core99_bank)) {
+ printk("nvram: Error erasing bank %d\n", core99_bank);
+ goto bail;
+ }
+ if (core99_write_bank)
+ if (core99_write_bank(core99_bank, nvram_image))
+ printk("nvram: Error writing bank %d\n", core99_bank);
+ bail:
+ spin_unlock_irqrestore(&nv_lock, flags);
+
+#ifdef DEBUG
+ mdelay(2000);
+#endif
+}
+
+void __init pmac_nvram_init(void)
+{
+ struct device_node *dp;
+
+ nvram_naddrs = 0;
+
+ dp = find_devices("nvram");
+ if (dp == NULL) {
+ printk(KERN_ERR "Can't find NVRAM device\n");
+ return;
+ }
+ nvram_naddrs = dp->n_addrs;
+ is_core_99 = device_is_compatible(dp, "nvram,flash");
+ if (is_core_99) {
+ int i;
+ u32 gen_bank0, gen_bank1;
+
+ if (nvram_naddrs < 1) {
+ printk(KERN_ERR "nvram: no address\n");
+ return;
+ }
+ nvram_image = alloc_bootmem(NVRAM_SIZE);
+ if (nvram_image == NULL) {
+ printk(KERN_ERR "nvram: can't allocate ram image\n");
+ return;
+ }
+ nvram_data = ioremap(dp->addrs[0].address, NVRAM_SIZE*2);
+ nvram_naddrs = 1; /* Make sure we get the correct case */
+
+ DBG("nvram: Checking bank 0...\n");
+
+ gen_bank0 = core99_check((u8 *)nvram_data);
+ gen_bank1 = core99_check((u8 *)nvram_data + NVRAM_SIZE);
+ core99_bank = (gen_bank0 < gen_bank1) ? 1 : 0;
+
+ DBG("nvram: gen0=%d, gen1=%d\n", gen_bank0, gen_bank1);
+ DBG("nvram: Active bank is: %d\n", core99_bank);
+
+ for (i=0; i<NVRAM_SIZE; i++)
+ nvram_image[i] = nvram_data[i + core99_bank*NVRAM_SIZE];
+
+ ppc_md.nvram_read_val = core99_nvram_read_byte;
+ ppc_md.nvram_write_val = core99_nvram_write_byte;
+ ppc_md.nvram_sync = core99_nvram_sync;
+ /*
+ * Maybe we could be smarter here though making an exclusive list
+ * of known flash chips is a bit nasty as older OF didn't provide us
+ * with a useful "compatible" entry. A solution would be to really
+ * identify the chip using flash id commands and base ourselves on
+ * a list of known chips IDs
+ */
+ if (device_is_compatible(dp, "amd-0137")) {
+ core99_erase_bank = amd_erase_bank;
+ core99_write_bank = amd_write_bank;
+ } else {
+ core99_erase_bank = sm_erase_bank;
+ core99_write_bank = sm_write_bank;
+ }
+ } else if (_machine == _MACH_chrp && nvram_naddrs == 1) {
+ nvram_data = ioremap(dp->addrs[0].address + isa_mem_base,
+ dp->addrs[0].size);
+ nvram_mult = 1;
+ ppc_md.nvram_read_val = direct_nvram_read_byte;
+ ppc_md.nvram_write_val = direct_nvram_write_byte;
+ } else if (nvram_naddrs == 1) {
+ nvram_data = ioremap(dp->addrs[0].address, dp->addrs[0].size);
+ nvram_mult = (dp->addrs[0].size + NVRAM_SIZE - 1) / NVRAM_SIZE;
+ ppc_md.nvram_read_val = direct_nvram_read_byte;
+ ppc_md.nvram_write_val = direct_nvram_write_byte;
+ } else if (nvram_naddrs == 2) {
+ nvram_addr = ioremap(dp->addrs[0].address, dp->addrs[0].size);
+ nvram_data = ioremap(dp->addrs[1].address, dp->addrs[1].size);
+ ppc_md.nvram_read_val = indirect_nvram_read_byte;
+ ppc_md.nvram_write_val = indirect_nvram_write_byte;
+ } else if (nvram_naddrs == 0 && sys_ctrler == SYS_CTRLER_PMU) {
+#ifdef CONFIG_ADB_PMU
+ nvram_naddrs = -1;
+ ppc_md.nvram_read_val = pmu_nvram_read_byte;
+ ppc_md.nvram_write_val = pmu_nvram_write_byte;
+#endif /* CONFIG_ADB_PMU */
+ } else {
+ printk(KERN_ERR "Don't know how to access NVRAM with %d addresses\n",
+ nvram_naddrs);
+ }
+ lookup_partitions();
+}
+
+int pmac_get_partition(int partition)
+{
+ return nvram_partitions[partition];
+}
+
+u8 pmac_xpram_read(int xpaddr)
+{
+ int offset = nvram_partitions[pmac_nvram_XPRAM];
+
+ if (offset < 0)
+ return 0xff;
+
+ return ppc_md.nvram_read_val(xpaddr + offset);
+}
+
+void pmac_xpram_write(int xpaddr, u8 data)
+{
+ int offset = nvram_partitions[pmac_nvram_XPRAM];
+
+ if (offset < 0)
+ return;
+
+ ppc_md.nvram_write_val(xpaddr + offset, data);
+}
+
+EXPORT_SYMBOL(pmac_get_partition);
+EXPORT_SYMBOL(pmac_xpram_read);
+EXPORT_SYMBOL(pmac_xpram_write);
diff --git a/arch/powerpc/platforms/powermac/pmac_pci.c b/arch/powerpc/platforms/powermac/pmac_pci.c
new file mode 100644
index 0000000..40bcd3e
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_pci.c
@@ -0,0 +1,1341 @@
+/*
+ * Support for PCI bridges found on Power Macintoshes.
+ * At present the "bandit" and "chaos" bridges are supported.
+ * Fortunately you access configuration space in the same
+ * way with either bridge.
+ *
+ * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+static int add_bridge(struct device_node *dev);
+extern void pmac_check_ht_link(void);
+
+/* XXX Could be per-controller, but I don't think we risk anything by
+ * assuming we won't have both UniNorth and Bandit */
+static int has_uninorth;
+#ifdef CONFIG_POWER4
+static struct pci_controller *u3_agp;
+#endif /* CONFIG_POWER4 */
+
+extern u8 pci_cache_line_size;
+extern int pcibios_assign_bus_offset;
+
+struct device_node *k2_skiplist[2];
+
+/*
+ * Magic constants for enabling cache coherency in the bandit/PSX bridge.
+ */
+#define BANDIT_DEVID_2 8
+#define BANDIT_REVID 3
+
+#define BANDIT_DEVNUM 11
+#define BANDIT_MAGIC 0x50
+#define BANDIT_COHERENT 0x40
+
+static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+ for (; node != 0;node = node->sibling) {
+ int * bus_range;
+ unsigned int *class_code;
+ int len;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down */
+ class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ bus_range = (int *) get_property(node, "bus-range", &len);
+ if (bus_range != NULL && len > 2 * sizeof(int)) {
+ if (bus_range[1] > higher)
+ higher = bus_range[1];
+ }
+ higher = fixup_one_level_bus_range(node->child, higher);
+ }
+ return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init fixup_bus_range(struct device_node *bridge)
+{
+ int * bus_range;
+ int len;
+
+ /* Lookup the "bus-range" property for the hose */
+ bus_range = (int *) get_property(bridge, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s\n",
+ bridge->full_name);
+ return;
+ }
+ bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+/*
+ * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
+ *
+ * The "Bandit" version is present in all early PCI PowerMacs,
+ * and up to the first ones using Grackle. Some machines may
+ * have 2 bandit controllers (2 PCI busses).
+ *
+ * "Chaos" is used in some "Bandit"-type machines as a bridge
+ * for the separate display bus. It is accessed the same
+ * way as bandit, but cannot be probed for devices. It therefore
+ * has its own config access functions.
+ *
+ * The "UniNorth" version is present in all Core99 machines
+ * (iBook, G4, new IMacs, and all the recent Apple machines).
+ * It contains 3 controllers in one ASIC.
+ *
+ * The U3 is the bridge used on G5 machines. It contains an
+ * AGP bus which is dealt with the old UniNorth access routines
+ * and a HyperTransport bus which uses its own set of access
+ * functions.
+ */
+
+#define MACRISC_CFA0(devfn, off) \
+ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
+ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
+ | (((unsigned long)(off)) & 0xFCUL))
+
+#define MACRISC_CFA1(bus, devfn, off) \
+ ((((unsigned long)(bus)) << 16) \
+ |(((unsigned long)(devfn)) << 8) \
+ |(((unsigned long)(off)) & 0xFCUL) \
+ |1UL)
+
+static unsigned long macrisc_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, u8 offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ if (dev_fn < (11 << 3))
+ return 0;
+ caddr = MACRISC_CFA0(dev_fn, offset);
+ } else
+ caddr = MACRISC_CFA1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= has_uninorth ? 0x07 : 0x03;
+ return ((unsigned long)hose->cfg_data) + offset;
+}
+
+static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr;
+
+ addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)addr);
+ break;
+ case 2:
+ *val = in_le16((u16 *)addr);
+ break;
+ default:
+ *val = in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr;
+
+ addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8((u8 *)addr, val);
+ (void) in_8((u8 *)addr);
+ break;
+ case 2:
+ out_le16((u16 *)addr, val);
+ (void) in_le16((u16 *)addr);
+ break;
+ default:
+ out_le32((u32 *)addr, val);
+ (void) in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops macrisc_pci_ops =
+{
+ macrisc_read_config,
+ macrisc_write_config
+};
+
+/*
+ * Verifiy that a specific (bus, dev_fn) exists on chaos
+ */
+static int
+chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+{
+ struct device_node *np;
+ u32 *vendor, *device;
+
+ np = pci_busdev_to_OF_node(bus, devfn);
+ if (np == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ vendor = (u32 *)get_property(np, "vendor-id", NULL);
+ device = (u32 *)get_property(np, "device-id", NULL);
+ if (vendor == NULL || device == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10)
+ && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ int result = chaos_validate_dev(bus, devfn, offset);
+ if (result == PCIBIOS_BAD_REGISTER_NUMBER)
+ *val = ~0U;
+ if (result != PCIBIOS_SUCCESSFUL)
+ return result;
+ return macrisc_read_config(bus, devfn, offset, len, val);
+}
+
+static int
+chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ int result = chaos_validate_dev(bus, devfn, offset);
+ if (result != PCIBIOS_SUCCESSFUL)
+ return result;
+ return macrisc_write_config(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops chaos_pci_ops =
+{
+ chaos_read_config,
+ chaos_write_config
+};
+
+#ifdef CONFIG_POWER4
+
+/*
+ * These versions of U3 HyperTransport config space access ops do not
+ * implement self-view of the HT host yet
+ */
+
+/*
+ * This function deals with some "special cases" devices.
+ *
+ * 0 -> No special case
+ * 1 -> Skip the device but act as if the access was successfull
+ * (return 0xff's on reads, eventually, cache config space
+ * accesses in a later version)
+ * -1 -> Hide the device (unsuccessful acess)
+ */
+static int u3_ht_skip_device(struct pci_controller *hose,
+ struct pci_bus *bus, unsigned int devfn)
+{
+ struct device_node *busdn, *dn;
+ int i;
+
+ /* We only allow config cycles to devices that are in OF device-tree
+ * as we are apparently having some weird things going on with some
+ * revs of K2 on recent G5s
+ */
+ if (bus->self)
+ busdn = pci_device_to_OF_node(bus->self);
+ else
+ busdn = hose->arch_data;
+ for (dn = busdn->child; dn; dn = dn->sibling)
+ if (dn->data && PCI_DN(dn)->devfn == devfn)
+ break;
+ if (dn == NULL)
+ return -1;
+
+ /*
+ * When a device in K2 is powered down, we die on config
+ * cycle accesses. Fix that here.
+ */
+ for (i=0; i<2; i++)
+ if (k2_skiplist[i] == dn)
+ return 1;
+
+ return 0;
+}
+
+#define U3_HT_CFA0(devfn, off) \
+ ((((unsigned long)devfn) << 8) | offset)
+#define U3_HT_CFA1(bus, devfn, off) \
+ (U3_HT_CFA0(devfn, off) \
+ + (((unsigned long)bus) << 16) \
+ + 0x01000000UL)
+
+static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 devfn, u8 offset)
+{
+ if (bus == hose->first_busno) {
+ /* For now, we don't self probe U3 HT bridge */
+ if (PCI_SLOT(devfn) == 0)
+ return 0;
+ return ((unsigned long)hose->cfg_data) + U3_HT_CFA0(devfn, offset);
+ } else
+ return ((unsigned long)hose->cfg_data) + U3_HT_CFA1(bus, devfn, offset);
+}
+
+static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr;
+
+ struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
+ if (np == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (u3_ht_skip_device(hose, bus, devfn)) {
+ case 0:
+ break;
+ case 1:
+ switch (len) {
+ case 1:
+ *val = 0xff; break;
+ case 2:
+ *val = 0xffff; break;
+ default:
+ *val = 0xfffffffful; break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)addr);
+ break;
+ case 2:
+ *val = in_le16((u16 *)addr);
+ break;
+ default:
+ *val = in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ unsigned long addr;
+
+ struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
+ if (np == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ switch (u3_ht_skip_device(hose, bus, devfn)) {
+ case 0:
+ break;
+ case 1:
+ return PCIBIOS_SUCCESSFUL;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8((u8 *)addr, val);
+ (void) in_8((u8 *)addr);
+ break;
+ case 2:
+ out_le16((u16 *)addr, val);
+ (void) in_le16((u16 *)addr);
+ break;
+ default:
+ out_le32((u32 *)addr, val);
+ (void) in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+ u3_ht_read_config,
+ u3_ht_write_config
+};
+
+#endif /* CONFIG_POWER4 */
+
+/*
+ * For a bandit bridge, turn on cache coherency if necessary.
+ * N.B. we could clean this up using the hose ops directly.
+ */
+static void __init
+init_bandit(struct pci_controller *bp)
+{
+ unsigned int vendev, magic;
+ int rev;
+
+ /* read the word at offset 0 in config space for device 11 */
+ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID);
+ udelay(2);
+ vendev = in_le32(bp->cfg_data);
+ if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) +
+ PCI_VENDOR_ID_APPLE) {
+ /* read the revision id */
+ out_le32(bp->cfg_addr,
+ (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID);
+ udelay(2);
+ rev = in_8(bp->cfg_data);
+ if (rev != BANDIT_REVID)
+ printk(KERN_WARNING
+ "Unknown revision %d for bandit\n", rev);
+ } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) {
+ printk(KERN_WARNING "bandit isn't? (%x)\n", vendev);
+ return;
+ }
+
+ /* read the word at offset 0x50 */
+ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC);
+ udelay(2);
+ magic = in_le32(bp->cfg_data);
+ if ((magic & BANDIT_COHERENT) != 0)
+ return;
+ magic |= BANDIT_COHERENT;
+ udelay(2);
+ out_le32(bp->cfg_data, magic);
+ printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
+}
+
+
+/*
+ * Tweak the PCI-PCI bridge chip on the blue & white G3s.
+ */
+static void __init
+init_p2pbridge(void)
+{
+ struct device_node *p2pbridge;
+ struct pci_controller* hose;
+ u8 bus, devfn;
+ u16 val;
+
+ /* XXX it would be better here to identify the specific
+ PCI-PCI bridge chip we have. */
+ if ((p2pbridge = find_devices("pci-bridge")) == 0
+ || p2pbridge->parent == NULL
+ || strcmp(p2pbridge->parent->name, "pci") != 0)
+ return;
+ if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
+ DBG("Can't find PCI infos for PCI<->PCI bridge\n");
+ return;
+ }
+ /* Warning: At this point, we have not yet renumbered all busses.
+ * So we must use OF walking to find out hose
+ */
+ hose = pci_find_hose_for_OF_device(p2pbridge);
+ if (!hose) {
+ DBG("Can't find hose for PCI<->PCI bridge\n");
+ return;
+ }
+ if (early_read_config_word(hose, bus, devfn,
+ PCI_BRIDGE_CONTROL, &val) < 0) {
+ printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n");
+ return;
+ }
+ val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
+ early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+}
+
+/*
+ * Some Apple desktop machines have a NEC PD720100A USB2 controller
+ * on the motherboard. Open Firmware, on these, will disable the
+ * EHCI part of it so it behaves like a pair of OHCI's. This fixup
+ * code re-enables it ;)
+ */
+static void __init
+fixup_nec_usb2(void)
+{
+ struct device_node *nec;
+
+ for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
+ struct pci_controller *hose;
+ u32 data, *prop;
+ u8 bus, devfn;
+
+ prop = (u32 *)get_property(nec, "vendor-id", NULL);
+ if (prop == NULL)
+ continue;
+ if (0x1033 != *prop)
+ continue;
+ prop = (u32 *)get_property(nec, "device-id", NULL);
+ if (prop == NULL)
+ continue;
+ if (0x0035 != *prop)
+ continue;
+ prop = (u32 *)get_property(nec, "reg", NULL);
+ if (prop == NULL)
+ continue;
+ devfn = (prop[0] >> 8) & 0xff;
+ bus = (prop[0] >> 16) & 0xff;
+ if (PCI_FUNC(devfn) != 0)
+ continue;
+ hose = pci_find_hose_for_OF_device(nec);
+ if (!hose)
+ continue;
+ early_read_config_dword(hose, bus, devfn, 0xe4, &data);
+ if (data & 1UL) {
+ printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n");
+ data &= ~1UL;
+ early_write_config_dword(hose, bus, devfn, 0xe4, data);
+ early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE,
+ nec->intrs[0].line);
+ }
+ }
+}
+
+void __init
+pmac_find_bridges(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht = NULL;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
+ return;
+ }
+ for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+ if (np->name == NULL)
+ continue;
+ if (strcmp(np->name, "bandit") == 0
+ || strcmp(np->name, "chaos") == 0
+ || strcmp(np->name, "pci") == 0) {
+ if (add_bridge(np) == 0)
+ of_node_get(np);
+ }
+ if (strcmp(np->name, "ht") == 0) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+ /* Probe HT last as it relies on the agp resources to be already
+ * setup
+ */
+ if (ht && add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ init_p2pbridge();
+ fixup_nec_usb2();
+
+ /* We are still having some issues with the Xserve G4, enabling
+ * some offset between bus number and domains for now when we
+ * assign all busses should help for now
+ */
+ if (pci_assign_all_busses)
+ pcibios_assign_bus_offset = 0x10;
+
+#ifdef CONFIG_POWER4
+ /* There is something wrong with DMA on U3/HT. I haven't figured out
+ * the details yet, but if I set the cache line size to 128 bytes like
+ * it should, I'm getting memory corruption caused by devices like
+ * sungem (even without the MWI bit set, but maybe sungem doesn't
+ * care). Right now, it appears that setting up a 64 bytes line size
+ * works properly, 64 bytes beeing the max transfer size of HT, I
+ * suppose this is related the way HT/PCI are hooked together. I still
+ * need to dive into more specs though to be really sure of what's
+ * going on. --BenH.
+ *
+ * Ok, apparently, it's just that HT can't do more than 64 bytes
+ * transactions. MWI seem to be meaningless there as well, it may
+ * be worth nop'ing out pci_set_mwi too though I haven't done that
+ * yet.
+ *
+ * Note that it's a bit different for whatever is in the AGP slot.
+ * For now, I don't care, but this can become a real issue, we
+ * should probably hook pci_set_mwi anyway to make sure it sets
+ * the real cache line size in there.
+ */
+ if (machine_is_compatible("MacRISC4"))
+ pci_cache_line_size = 16; /* 64 bytes */
+
+ pmac_check_ht_link();
+#endif /* CONFIG_POWER4 */
+}
+
+#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \
+ | (((o) & ~3) << 24))
+
+#define GRACKLE_PICR1_STG 0x00000040
+#define GRACKLE_PICR1_LOOPSNOOP 0x00000010
+
+/* N.B. this is called before bridges is initialized, so we can't
+ use grackle_pcibios_{read,write}_config_dword. */
+static inline void grackle_set_stg(struct pci_controller* bp, int enable)
+{
+ unsigned int val;
+
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ val = in_le32(bp->cfg_data);
+ val = enable? (val | GRACKLE_PICR1_STG) :
+ (val & ~GRACKLE_PICR1_STG);
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ out_le32(bp->cfg_data, val);
+ (void)in_le32(bp->cfg_data);
+}
+
+static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
+{
+ unsigned int val;
+
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ val = in_le32(bp->cfg_data);
+ val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) :
+ (val & ~GRACKLE_PICR1_LOOPSNOOP);
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ out_le32(bp->cfg_data, val);
+ (void)in_le32(bp->cfg_data);
+}
+
+static int __init
+setup_uninorth(struct pci_controller* hose, struct reg_property* addr)
+{
+ pci_assign_all_busses = 1;
+ has_uninorth = 1;
+ hose->ops = ¯isc_pci_ops;
+ hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ /* We "know" that the bridge at f2000000 has the PCI slots. */
+ return addr->address == 0xf2000000;
+}
+
+static void __init
+setup_bandit(struct pci_controller* hose, struct reg_property* addr)
+{
+ hose->ops = ¯isc_pci_ops;
+ hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ init_bandit(hose);
+}
+
+static void __init
+setup_chaos(struct pci_controller* hose, struct reg_property* addr)
+{
+ /* assume a `chaos' bridge */
+ hose->ops = &chaos_pci_ops;
+ hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+}
+
+#ifdef CONFIG_POWER4
+
+static void __init setup_u3_agp(struct pci_controller* hose)
+{
+ /* On G5, we move AGP up to high bus number so we don't need
+ * to reassign bus numbers for HT. If we ever have P2P bridges
+ * on AGP, we'll have to move pci_assign_all_busses to the
+ * pci_controller structure so we enable it for AGP and not for
+ * HT childs.
+ * We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->first_busno = 0xf0;
+ hose->last_busno = 0xff;
+ has_uninorth = 1;
+ hose->ops = ¯isc_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u3_agp = hose;
+}
+
+static void __init setup_u3_ht(struct pci_controller* hose)
+{
+ struct device_node *np = (struct device_node *)hose->arch_data;
+ int i, cur;
+
+ hose->ops = &u3_ht_pci_ops;
+
+ /* We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000);
+
+ /*
+ * /ht node doesn't expose a "ranges" property, so we "remove" regions that
+ * have been allocated to AGP. So far, this version of the code doesn't assign
+ * any of the 0xfxxxxxxx "fine" memory regions to /ht.
+ * We need to fix that sooner or later by either parsing all child "ranges"
+ * properties or figuring out the U3 address space decoding logic and
+ * then read its configuration register (if any).
+ */
+ hose->io_base_phys = 0xf4000000;
+ hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
+ isa_io_base = (unsigned long) hose->io_base_virt;
+ hose->io_resource.name = np->full_name;
+ hose->io_resource.start = 0;
+ hose->io_resource.end = 0x003fffff;
+ hose->io_resource.flags = IORESOURCE_IO;
+ hose->pci_mem_offset = 0;
+ hose->first_busno = 0;
+ hose->last_busno = 0xef;
+ hose->mem_resources[0].name = np->full_name;
+ hose->mem_resources[0].start = 0x80000000;
+ hose->mem_resources[0].end = 0xefffffff;
+ hose->mem_resources[0].flags = IORESOURCE_MEM;
+
+ if (u3_agp == NULL) {
+ DBG("U3 has no AGP, using full resource range\n");
+ return;
+ }
+
+ /* We "remove" the AGP resources from the resources allocated to HT, that
+ * is we create "holes". However, that code does assumptions that so far
+ * happen to be true (cross fingers...), typically that resources in the
+ * AGP node are properly ordered
+ */
+ cur = 0;
+ for (i=0; i<3; i++) {
+ struct resource *res = &u3_agp->mem_resources[i];
+ if (res->flags != IORESOURCE_MEM)
+ continue;
+ /* We don't care about "fine" resources */
+ if (res->start >= 0xf0000000)
+ continue;
+ /* Check if it's just a matter of "shrinking" us in one direction */
+ if (hose->mem_resources[cur].start == res->start) {
+ DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
+ cur, hose->mem_resources[cur].start, res->end + 1);
+ hose->mem_resources[cur].start = res->end + 1;
+ continue;
+ }
+ if (hose->mem_resources[cur].end == res->end) {
+ DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
+ cur, hose->mem_resources[cur].end, res->start - 1);
+ hose->mem_resources[cur].end = res->start - 1;
+ continue;
+ }
+ /* No, it's not the case, we need a hole */
+ if (cur == 2) {
+ /* not enough resources to make a hole, we drop part of the range */
+ printk(KERN_WARNING "Running out of resources for /ht host !\n");
+ hose->mem_resources[cur].end = res->start - 1;
+ continue;
+ }
+ cur++;
+ DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
+ cur-1, res->start - 1, cur, res->end + 1);
+ hose->mem_resources[cur].name = np->full_name;
+ hose->mem_resources[cur].flags = IORESOURCE_MEM;
+ hose->mem_resources[cur].start = res->end + 1;
+ hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
+ hose->mem_resources[cur-1].end = res->start - 1;
+ }
+}
+
+#endif /* CONFIG_POWER4 */
+
+void __init
+setup_grackle(struct pci_controller *hose)
+{
+ setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+ if (machine_is_compatible("AAPL,PowerBook1998"))
+ grackle_set_loop_snoop(hose, 1);
+#if 0 /* Disabled for now, HW problems ??? */
+ grackle_set_stg(hose, 1);
+#endif
+}
+
+static void __init pmac_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary)
+{
+ static unsigned int static_lc_ranges[2024];
+ unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
+ unsigned int size;
+ int rlen = 0, orig_rlen;
+ int memno = 0;
+ struct resource *res;
+ int np, na = prom_n_addr_cells(dev);
+
+ np = na + 5;
+
+ /* First we try to merge ranges to fix a problem with some pmacs
+ * that can have more than 3 ranges, fortunately using contiguous
+ * addresses -- BenH
+ */
+ dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+ if (!dt_ranges)
+ return;
+ /* lc_ranges = alloc_bootmem(rlen);*/
+ lc_ranges = static_lc_ranges;
+ if (!lc_ranges)
+ return; /* what can we do here ? */
+ memcpy(lc_ranges, dt_ranges, rlen);
+ orig_rlen = rlen;
+
+ /* Let's work on a copy of the "ranges" property instead of damaging
+ * the device-tree image in memory
+ */
+ ranges = lc_ranges;
+ prev = NULL;
+ while ((rlen -= np * sizeof(unsigned int)) >= 0) {
+ if (prev) {
+ if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
+ (prev[2] + prev[na+4]) == ranges[2] &&
+ (prev[na+2] + prev[na+4]) == ranges[na+2]) {
+ prev[na+4] += ranges[na+4];
+ ranges[0] = 0;
+ ranges += np;
+ continue;
+ }
+ }
+ prev = ranges;
+ ranges += np;
+ }
+
+ /*
+ * The ranges property is laid out as an array of elements,
+ * each of which comprises:
+ * cells 0 - 2: a PCI address
+ * cells 3 or 3+4: a CPU physical address
+ * (size depending on dev->n_addr_cells)
+ * cells 4+5 or 5+6: the size of the range
+ */
+ ranges = lc_ranges;
+ rlen = orig_rlen;
+ while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
+ res = NULL;
+ size = ranges[na+4];
+ switch (ranges[0] >> 24) {
+ case 1: /* I/O space */
+ if (ranges[2] != 0)
+ break;
+ hose->io_base_phys = ranges[na+2];
+ /* limit I/O space to 16MB */
+ if (size > 0x01000000)
+ size = 0x01000000;
+ hose->io_base_virt = ioremap(ranges[na+2], size);
+ if (primary)
+ isa_io_base = (unsigned long) hose->io_base_virt;
+ res = &hose->io_resource;
+ res->flags = IORESOURCE_IO;
+ res->start = ranges[2];
+ break;
+ case 2: /* memory space */
+ memno = 0;
+ if (ranges[1] == 0 && ranges[2] == 0
+ && ranges[na+4] <= (16 << 20)) {
+ /* 1st 16MB, i.e. ISA memory area */
+#if 0
+ if (primary)
+ isa_mem_base = ranges[na+2];
+#endif
+ memno = 1;
+ }
+ while (memno < 3 && hose->mem_resources[memno].flags)
+ ++memno;
+ if (memno == 0)
+ hose->pci_mem_offset = ranges[na+2] - ranges[2];
+ if (memno < 3) {
+ res = &hose->mem_resources[memno];
+ res->flags = IORESOURCE_MEM;
+ res->start = ranges[na+2];
+ }
+ break;
+ }
+ if (res != NULL) {
+ res->name = dev->full_name;
+ res->end = res->start + size - 1;
+ res->parent = NULL;
+ res->sibling = NULL;
+ res->child = NULL;
+ }
+ ranges += np;
+ }
+}
+
+/*
+ * We assume that if we have a G3 powermac, we have one bridge called
+ * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
+ * if we have one or more bandit or chaos bridges, we don't have a MPC106.
+ */
+static int __init add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct reg_property *addr;
+ char* disp_name;
+ int *bus_range;
+ int primary = 1;
+
+ DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+ addr = (struct reg_property *) get_property(dev, "reg", &len);
+ if (addr == NULL || len < sizeof(*addr)) {
+ printk(KERN_WARNING "Can't use %s: no address\n",
+ dev->full_name);
+ return -ENODEV;
+ }
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
+ dev->full_name);
+ }
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+ hose->arch_data = dev;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ disp_name = NULL;
+#ifdef CONFIG_POWER4
+ if (device_is_compatible(dev, "u3-agp")) {
+ setup_u3_agp(hose, addr);
+ disp_name = "U3-AGP";
+ primary = 0;
+ } else if (device_is_compatible(dev, "u3-ht")) {
+ setup_u3_ht(hose, addr);
+ disp_name = "U3-HT";
+ primary = 1;
+ } else
+#endif /* CONFIG_POWER4 */
+ if (device_is_compatible(dev, "uni-north")) {
+ primary = setup_uninorth(hose, addr);
+ disp_name = "UniNorth";
+ } else if (strcmp(dev->name, "pci") == 0) {
+ /* XXX assume this is a mpc106 (grackle) */
+ setup_grackle(hose);
+ disp_name = "Grackle (MPC106)";
+ } else if (strcmp(dev->name, "bandit") == 0) {
+ setup_bandit(hose, addr);
+ disp_name = "Bandit";
+ } else if (strcmp(dev->name, "chaos") == 0) {
+ setup_chaos(hose, addr);
+ disp_name = "Chaos";
+ primary = 0;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n",
+ disp_name, addr->address, hose->first_busno, hose->last_busno);
+ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Fixup "bus-range" OF property */
+ fixup_bus_range(dev);
+
+ return 0;
+}
+
+static void __init
+pcibios_fixup_OF_interrupts(void)
+{
+ struct pci_dev* dev = NULL;
+
+ /*
+ * Open Firmware often doesn't initialize the
+ * PCI_INTERRUPT_LINE config register properly, so we
+ * should find the device node and apply the interrupt
+ * obtained from the OF device-tree
+ */
+ for_each_pci_dev(dev) {
+ struct device_node *node;
+ node = pci_device_to_OF_node(dev);
+ /* this is the node, see if it has interrupts */
+ if (node && node->n_intrs > 0)
+ dev->irq = node->intrs[0].line;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+}
+
+void __init
+pmac_pcibios_fixup(void)
+{
+ /* Fixup interrupts according to OF tree */
+ pcibios_fixup_OF_interrupts();
+}
+
+int
+pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
+{
+ struct device_node* node;
+ int updatecfg = 0;
+ int uninorth_child;
+
+ node = pci_device_to_OF_node(dev);
+
+ /* We don't want to enable USB controllers absent from the OF tree
+ * (iBook second controller)
+ */
+ if (dev->vendor == PCI_VENDOR_ID_APPLE
+ && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10))
+ && !node) {
+ printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+
+ if (!node)
+ return 0;
+
+ uninorth_child = node->parent &&
+ device_is_compatible(node->parent, "uni-north");
+
+ /* Firewire & GMAC were disabled after PCI probe, the driver is
+ * claiming them, we must re-enable them now.
+ */
+ if (uninorth_child && !strcmp(node->name, "firewire") &&
+ (device_is_compatible(node, "pci106b,18") ||
+ device_is_compatible(node, "pci106b,30") ||
+ device_is_compatible(node, "pci11c1,5811"))) {
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
+ updatecfg = 1;
+ }
+ if (uninorth_child && !strcmp(node->name, "ethernet") &&
+ device_is_compatible(node, "gmac")) {
+ pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
+ updatecfg = 1;
+ }
+
+ if (updatecfg) {
+ u16 cmd;
+
+ /*
+ * Make sure PCI is correctly configured
+ *
+ * We use old pci_bios versions of the function since, by
+ * default, gmac is not powered up, and so will be absent
+ * from the kernel initial PCI lookup.
+ *
+ * Should be replaced by 2.4 new PCI mechanisms and really
+ * register the device.
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
+ }
+
+ return 0;
+}
+
+/* We power down some devices after they have been probed. They'll
+ * be powered back on later on
+ */
+void __init
+pmac_pcibios_after_init(void)
+{
+ struct device_node* nd;
+
+#ifdef CONFIG_BLK_DEV_IDE
+ struct pci_dev *dev = NULL;
+
+ /* OF fails to initialize IDE controllers on macs
+ * (and maybe other machines)
+ *
+ * Ideally, this should be moved to the IDE layer, but we need
+ * to check specifically with Andre Hedrick how to do it cleanly
+ * since the common IDE code seem to care about the fact that the
+ * BIOS may have disabled a controller.
+ *
+ * -- BenH
+ */
+ for_each_pci_dev(dev) {
+ if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE)
+ pci_enable_device(dev);
+ }
+#endif /* CONFIG_BLK_DEV_IDE */
+
+ nd = find_devices("firewire");
+ while (nd) {
+ if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
+ device_is_compatible(nd, "pci106b,30") ||
+ device_is_compatible(nd, "pci11c1,5811"))
+ && device_is_compatible(nd->parent, "uni-north")) {
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
+ }
+ nd = nd->next;
+ }
+ nd = find_devices("ethernet");
+ while (nd) {
+ if (nd->parent && device_is_compatible(nd, "gmac")
+ && device_is_compatible(nd->parent, "uni-north"))
+ pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
+ nd = nd->next;
+ }
+}
+
+#ifdef CONFIG_PPC64
+static void __init pmac_fixup_phb_resources(void)
+{
+ struct pci_controller *hose, *tmp;
+
+ list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
+ unsigned long offset = (unsigned long)hose->io_base_virt - pci_io_base;
+ hose->io_resource.start += offset;
+ hose->io_resource.end += offset;
+ printk(KERN_INFO "PCI Host %d, io start: %lx; io end: %lx\n",
+ hose->global_number,
+ hose->io_resource.start, hose->io_resource.end);
+ }
+}
+
+void __init pmac_pci_init(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht = NULL;
+
+ /* Probe root PCI hosts, that is on U3 the AGP host and the
+ * HyperTransport host. That one is actually "kept" around
+ * and actually added last as it's resource management relies
+ * on the AGP resources to have been setup first
+ */
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
+ return;
+ }
+ for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+ if (np->name == NULL)
+ continue;
+ if (strcmp(np->name, "pci") == 0) {
+ if (add_bridge(np) == 0)
+ of_node_get(np);
+ }
+ if (strcmp(np->name, "ht") == 0) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+ /* Now setup the HyperTransport host if we found any
+ */
+ if (ht && add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ /* Fixup the IO resources on our host bridges as the common code
+ * does it only for childs of the host bridges
+ */
+ pmac_fixup_phb_resources();
+
+ /* Setup the linkage between OF nodes and PHBs */
+ pci_devs_phb_init();
+
+ /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
+ * assume there is no P2P bridge on the AGP bus, which should be a
+ * safe assumptions hopefully.
+ */
+ if (u3_agp) {
+ struct device_node *np = u3_agp->arch_data;
+ PCI_DN(np)->busno = 0xf0;
+ for (np = np->child; np; np = np->sibling)
+ PCI_DN(np)->busno = 0xf0;
+ }
+
+ pmac_check_ht_link();
+
+ /* Tell pci.c to not use the common resource allocation mecanism */
+ pci_probe_only = 1;
+
+ /* Allow all IO */
+ io_page_mask = -1;
+}
+#endif
+
+#ifdef CONFIG_PPC32
+void pmac_pci_fixup_cardbus(struct pci_dev* dev)
+{
+ if (_machine != _MACH_Pmac)
+ return;
+ /*
+ * Fix the interrupt routing on the various cardbus bridges
+ * used on powerbooks
+ */
+ if (dev->vendor != PCI_VENDOR_ID_TI)
+ return;
+ if (dev->device == PCI_DEVICE_ID_TI_1130 ||
+ dev->device == PCI_DEVICE_ID_TI_1131) {
+ u8 val;
+ /* Enable PCI interrupt */
+ if (pci_read_config_byte(dev, 0x91, &val) == 0)
+ pci_write_config_byte(dev, 0x91, val | 0x30);
+ /* Disable ISA interrupt mode */
+ if (pci_read_config_byte(dev, 0x92, &val) == 0)
+ pci_write_config_byte(dev, 0x92, val & ~0x06);
+ }
+ if (dev->device == PCI_DEVICE_ID_TI_1210 ||
+ dev->device == PCI_DEVICE_ID_TI_1211 ||
+ dev->device == PCI_DEVICE_ID_TI_1410 ||
+ dev->device == PCI_DEVICE_ID_TI_1510) {
+ u8 val;
+ /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA
+ signal out the MFUNC0 pin */
+ if (pci_read_config_byte(dev, 0x8c, &val) == 0)
+ pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2);
+ /* Disable ISA interrupt mode */
+ if (pci_read_config_byte(dev, 0x92, &val) == 0)
+ pci_write_config_byte(dev, 0x92, val & ~0x06);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus);
+
+void pmac_pci_fixup_pciata(struct pci_dev* dev)
+{
+ u8 progif = 0;
+
+ /*
+ * On PowerMacs, we try to switch any PCI ATA controller to
+ * fully native mode
+ */
+ if (_machine != _MACH_Pmac)
+ return;
+ /* Some controllers don't have the class IDE */
+ if (dev->vendor == PCI_VENDOR_ID_PROMISE)
+ switch(dev->device) {
+ case PCI_DEVICE_ID_PROMISE_20246:
+ case PCI_DEVICE_ID_PROMISE_20262:
+ case PCI_DEVICE_ID_PROMISE_20263:
+ case PCI_DEVICE_ID_PROMISE_20265:
+ case PCI_DEVICE_ID_PROMISE_20267:
+ case PCI_DEVICE_ID_PROMISE_20268:
+ case PCI_DEVICE_ID_PROMISE_20269:
+ case PCI_DEVICE_ID_PROMISE_20270:
+ case PCI_DEVICE_ID_PROMISE_20271:
+ case PCI_DEVICE_ID_PROMISE_20275:
+ case PCI_DEVICE_ID_PROMISE_20276:
+ case PCI_DEVICE_ID_PROMISE_20277:
+ goto good;
+ }
+ /* Others, check PCI class */
+ if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ good:
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ if ((progif & 5) != 5) {
+ printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+ (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
+ if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+ (progif & 5) != 5)
+ printk(KERN_ERR "Rewrite of PROGIF failed !\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
+#endif
+
+/*
+ * Disable second function on K2-SATA, it's broken
+ * and disable IO BARs on first one
+ */
+static void fixup_k2_sata(struct pci_dev* dev)
+{
+ int i;
+ u16 cmd;
+
+ if (PCI_FUNC(dev->devfn) > 0) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ for (i = 0; i < 6; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ }
+ } else {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~PCI_COMMAND_IO;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ for (i = 0; i < 5; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
+
diff --git a/arch/powerpc/platforms/powermac/pmac_pic.c b/arch/powerpc/platforms/powermac/pmac_pic.c
new file mode 100644
index 0000000..bf3e189
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_pic.c
@@ -0,0 +1,655 @@
+/*
+ * Support for the interrupt controllers found on Power Macintosh,
+ * currently Apple's "Grand Central" interrupt controller in all
+ * it's incarnations. OpenPIC support used on newer machines is
+ * in a separate file
+ *
+ * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
+ *
+ * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/xmon.h>
+#include <asm/pmac_feature.h>
+#include <asm/mpic.h>
+
+#include "pmac_pic.h"
+
+/*
+ * XXX this should be in xmon.h, but putting it there means xmon.h
+ * has to include <linux/interrupt.h> (to get irqreturn_t), which
+ * causes all sorts of problems. -- paulus
+ */
+extern irqreturn_t xmon_irq(int, void *, struct pt_regs *);
+
+struct pmac_irq_hw {
+ unsigned int event;
+ unsigned int enable;
+ unsigned int ack;
+ unsigned int level;
+};
+
+/* Default addresses */
+static volatile struct pmac_irq_hw *pmac_irq_hw[4] = {
+ (struct pmac_irq_hw *) 0xf3000020,
+ (struct pmac_irq_hw *) 0xf3000010,
+ (struct pmac_irq_hw *) 0xf4000020,
+ (struct pmac_irq_hw *) 0xf4000010,
+};
+
+#define GC_LEVEL_MASK 0x3ff00000
+#define OHARE_LEVEL_MASK 0x1ff00000
+#define HEATHROW_LEVEL_MASK 0x1ff00000
+
+static int max_irqs;
+static int max_real_irqs;
+static u32 level_mask[4];
+
+static DEFINE_SPINLOCK(pmac_pic_lock);
+
+
+#define GATWICK_IRQ_POOL_SIZE 10
+static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE];
+
+/*
+ * Mark an irq as "lost". This is only used on the pmac
+ * since it can lose interrupts (see pmac_set_irq_mask).
+ * -- Cort
+ */
+void
+__set_lost(unsigned long irq_nr, int nokick)
+{
+ if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) {
+ atomic_inc(&ppc_n_lost_interrupts);
+ if (!nokick)
+ set_dec(1);
+ }
+}
+
+static void
+pmac_mask_and_ack_irq(unsigned int irq_nr)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+ unsigned long flags;
+
+ if ((unsigned)irq_nr >= max_irqs)
+ return;
+
+ clear_bit(irq_nr, ppc_cached_irq_mask);
+ if (test_and_clear_bit(irq_nr, ppc_lost_interrupts))
+ atomic_dec(&ppc_n_lost_interrupts);
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ do {
+ /* make sure ack gets to controller before we enable
+ interrupts */
+ mb();
+ } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+ != (ppc_cached_irq_mask[i] & bit));
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+ unsigned long flags;
+
+ if ((unsigned)irq_nr >= max_irqs)
+ return;
+
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ /* enable unmasked interrupts */
+ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]);
+
+ do {
+ /* make sure mask gets to controller before we
+ return to user */
+ mb();
+ } while((in_le32(&pmac_irq_hw[i]->enable) & bit)
+ != (ppc_cached_irq_mask[i] & bit));
+
+ /*
+ * Unfortunately, setting the bit in the enable register
+ * when the device interrupt is already on *doesn't* set
+ * the bit in the flag register or request another interrupt.
+ */
+ if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level))
+ __set_lost((ulong)irq_nr, nokicklost);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
+}
+
+/* When an irq gets requested for the first client, if it's an
+ * edge interrupt, we clear any previous one on the controller
+ */
+static unsigned int pmac_startup_irq(unsigned int irq_nr)
+{
+ unsigned long bit = 1UL << (irq_nr & 0x1f);
+ int i = irq_nr >> 5;
+
+ if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
+ out_le32(&pmac_irq_hw[i]->ack, bit);
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+
+ return 0;
+}
+
+static void pmac_mask_irq(unsigned int irq_nr)
+{
+ clear_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+ mb();
+}
+
+static void pmac_unmask_irq(unsigned int irq_nr)
+{
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 0);
+}
+
+static void pmac_end_irq(unsigned int irq_nr)
+{
+ if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && irq_desc[irq_nr].action) {
+ set_bit(irq_nr, ppc_cached_irq_mask);
+ pmac_set_irq_mask(irq_nr, 1);
+ }
+}
+
+
+struct hw_interrupt_type pmac_pic = {
+ .typename = " PMAC-PIC ",
+ .startup = pmac_startup_irq,
+ .enable = pmac_unmask_irq,
+ .disable = pmac_mask_irq,
+ .ack = pmac_mask_and_ack_irq,
+ .end = pmac_end_irq,
+};
+
+struct hw_interrupt_type gatwick_pic = {
+ .typename = " GATWICK ",
+ .startup = pmac_startup_irq,
+ .enable = pmac_unmask_irq,
+ .disable = pmac_mask_irq,
+ .ack = pmac_mask_and_ack_irq,
+ .end = pmac_end_irq,
+};
+
+static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs)
+{
+ int irq, bits;
+
+ for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) {
+ int i = irq >> 5;
+ bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+ /* We must read level interrupts from the level register */
+ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits &= ppc_cached_irq_mask[i];
+ if (bits == 0)
+ continue;
+ irq += __ilog2(bits);
+ __do_IRQ(irq, regs);
+ return IRQ_HANDLED;
+ }
+ printk("gatwick irq not from gatwick pic\n");
+ return IRQ_NONE;
+}
+
+int
+pmac_get_irq(struct pt_regs *regs)
+{
+ int irq;
+ unsigned long bits = 0;
+
+#ifdef CONFIG_SMP
+ void psurge_smp_message_recv(struct pt_regs *);
+
+ /* IPI's are a hack on the powersurge -- Cort */
+ if ( smp_processor_id() != 0 ) {
+ psurge_smp_message_recv(regs);
+ return -2; /* ignore, already handled */
+ }
+#endif /* CONFIG_SMP */
+ for (irq = max_real_irqs; (irq -= 32) >= 0; ) {
+ int i = irq >> 5;
+ bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i];
+ /* We must read level interrupts from the level register */
+ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]);
+ bits &= ppc_cached_irq_mask[i];
+ if (bits == 0)
+ continue;
+ irq += __ilog2(bits);
+ break;
+ }
+
+ return irq;
+}
+
+/* This routine will fix some missing interrupt values in the device tree
+ * on the gatwick mac-io controller used by some PowerBooks
+ */
+static void __init
+pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base)
+{
+ struct device_node *node;
+ int count;
+
+ memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool));
+ node = gw->child;
+ count = 0;
+ while(node)
+ {
+ /* Fix SCC */
+ if (strcasecmp(node->name, "escc") == 0)
+ if (node->child) {
+ if (node->child->n_intrs < 3) {
+ node->child->intrs = &gatwick_int_pool[count];
+ count += 3;
+ }
+ node->child->n_intrs = 3;
+ node->child->intrs[0].line = 15+irq_base;
+ node->child->intrs[1].line = 4+irq_base;
+ node->child->intrs[2].line = 5+irq_base;
+ printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n",
+ node->child->intrs[0].line,
+ node->child->intrs[1].line,
+ node->child->intrs[2].line);
+ }
+ /* Fix media-bay & left SWIM */
+ if (strcasecmp(node->name, "media-bay") == 0) {
+ struct device_node* ya_node;
+
+ if (node->n_intrs == 0)
+ node->intrs = &gatwick_int_pool[count++];
+ node->n_intrs = 1;
+ node->intrs[0].line = 29+irq_base;
+ printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n",
+ node->intrs[0].line);
+
+ ya_node = node->child;
+ while(ya_node)
+ {
+ if (strcasecmp(ya_node->name, "floppy") == 0) {
+ if (ya_node->n_intrs < 2) {
+ ya_node->intrs = &gatwick_int_pool[count];
+ count += 2;
+ }
+ ya_node->n_intrs = 2;
+ ya_node->intrs[0].line = 19+irq_base;
+ ya_node->intrs[1].line = 1+irq_base;
+ printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n",
+ ya_node->intrs[0].line, ya_node->intrs[1].line);
+ }
+ if (strcasecmp(ya_node->name, "ata4") == 0) {
+ if (ya_node->n_intrs < 2) {
+ ya_node->intrs = &gatwick_int_pool[count];
+ count += 2;
+ }
+ ya_node->n_intrs = 2;
+ ya_node->intrs[0].line = 14+irq_base;
+ ya_node->intrs[1].line = 3+irq_base;
+ printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n",
+ ya_node->intrs[0].line, ya_node->intrs[1].line);
+ }
+ ya_node = ya_node->sibling;
+ }
+ }
+ node = node->sibling;
+ }
+ if (count > 10) {
+ printk("WARNING !! Gatwick interrupt pool overflow\n");
+ printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE);
+ printk(" requested = %d\n", count);
+ }
+}
+
+/*
+ * The PowerBook 3400/2400/3500 can have a combo ethernet/modem
+ * card which includes an ohare chip that acts as a second interrupt
+ * controller. If we find this second ohare, set it up and fix the
+ * interrupt value in the device tree for the ethernet chip.
+ */
+static int __init enable_second_ohare(void)
+{
+ unsigned char bus, devfn;
+ unsigned short cmd;
+ unsigned long addr;
+ struct device_node *irqctrler = find_devices("pci106b,7");
+ struct device_node *ether;
+
+ if (irqctrler == NULL || irqctrler->n_addrs <= 0)
+ return -1;
+ addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40);
+ pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20);
+ max_irqs = 64;
+ if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) {
+ struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler);
+ if (!hose)
+ printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+ else {
+ early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ cmd &= ~PCI_COMMAND_IO;
+ early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+ }
+ }
+
+ /* Fix interrupt for the modem/ethernet combo controller. The number
+ in the device tree (27) is bogus (correct for the ethernet-only
+ board but not the combo ethernet/modem board).
+ The real interrupt is 28 on the second controller -> 28+32 = 60.
+ */
+ ether = find_devices("pci1011,14");
+ if (ether && ether->n_intrs > 0) {
+ ether->intrs[0].line = 60;
+ printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n",
+ ether->intrs[0].line);
+ }
+
+ /* Return the interrupt number of the cascade */
+ return irqctrler->intrs[0].line;
+}
+
+static int pmac_u3_cascade(struct pt_regs *regs, void *data)
+{
+ return mpic_get_one_irq((struct mpic *)data, regs);
+}
+
+#ifdef CONFIG_XMON
+static struct irqaction xmon_action = {
+ .handler = xmon_irq,
+ .flags = 0,
+ .mask = CPU_MASK_NONE,
+ .name = "NMI - XMON"
+};
+#endif
+
+static struct irqaction gatwick_cascade_action = {
+ .handler = gatwick_action,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cascade",
+};
+
+void __init pmac_pic_init(void)
+{
+ int i;
+ struct device_node *irqctrler = NULL;
+ struct device_node *irqctrler2 = NULL;
+ struct device_node *np;
+ unsigned long addr;
+ int irq_cascade = -1;
+ struct mpic *mpic1, *mpic2;
+
+ /* We first try to detect Apple's new Core99 chipset, since mac-io
+ * is quite different on those machines and contains an IBM MPIC2.
+ */
+ np = find_type_devices("open-pic");
+ while (np) {
+ if (np->parent && !strcmp(np->parent->name, "u3"))
+ irqctrler2 = np;
+ else
+ irqctrler = np;
+ np = np->next;
+ }
+ if (irqctrler != NULL && irqctrler->n_addrs > 0) {
+ unsigned char senses[128];
+
+ printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n",
+ (unsigned int)irqctrler->addrs[0].address);
+
+ prom_get_irq_senses(senses, 0, 128);
+ mpic1 = mpic_alloc(irqctrler->addrs[0].address,
+ MPIC_PRIMARY | MPIC_WANTS_RESET,
+ 0, 0, 128, 256, senses, 128, " K2-MPIC ");
+ BUG_ON(mpic1 == NULL);
+ mpic_init(mpic1);
+
+ if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 &&
+ irqctrler2->n_addrs > 0) {
+ printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n",
+ (u32)irqctrler2->addrs[0].address,
+ irqctrler2->intrs[0].line);
+
+ pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0);
+ prom_get_irq_senses(senses, 128, 128 + 128);
+
+ /* We don't need to set MPIC_BROKEN_U3 here since we don't have
+ * hypertransport interrupts routed to it
+ */
+ mpic2 = mpic_alloc(irqctrler2->addrs[0].address,
+ MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
+ 0, 128, 128, 0, senses, 128, " U3-MPIC ");
+ BUG_ON(mpic2 == NULL);
+ mpic_init(mpic2);
+ mpic_setup_cascade(irqctrler2->intrs[0].line,
+ pmac_u3_cascade, mpic2);
+ }
+ }
+
+ /* Get the level/edge settings, assume if it's not
+ * a Grand Central nor an OHare, then it's an Heathrow
+ * (or Paddington).
+ */
+ if (find_devices("gc"))
+ level_mask[0] = GC_LEVEL_MASK;
+ else if (find_devices("ohare")) {
+ level_mask[0] = OHARE_LEVEL_MASK;
+ /* We might have a second cascaded ohare */
+ level_mask[1] = OHARE_LEVEL_MASK;
+ } else {
+ level_mask[0] = HEATHROW_LEVEL_MASK;
+ level_mask[1] = 0;
+ /* We might have a second cascaded heathrow */
+ level_mask[2] = HEATHROW_LEVEL_MASK;
+ level_mask[3] = 0;
+ }
+
+ /*
+ * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts,
+ * 1998 G3 Series PowerBooks have 128,
+ * other powermacs have 32.
+ * The combo ethernet/modem card for the Powerstar powerbooks
+ * (2400/3400/3500, ohare based) has a second ohare chip
+ * effectively making a total of 64.
+ */
+ max_irqs = max_real_irqs = 32;
+ irqctrler = find_devices("mac-io");
+ if (irqctrler)
+ {
+ max_real_irqs = 64;
+ if (irqctrler->next)
+ max_irqs = 128;
+ else
+ max_irqs = 64;
+ }
+ for ( i = 0; i < max_real_irqs ; i++ )
+ irq_desc[i].handler = &pmac_pic;
+
+ /* get addresses of first controller */
+ if (irqctrler) {
+ if (irqctrler->n_addrs > 0) {
+ addr = (unsigned long)
+ ioremap(irqctrler->addrs[0].address, 0x40);
+ for (i = 0; i < 2; ++i)
+ pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+ (addr + (2 - i) * 0x10);
+ }
+
+ /* get addresses of second controller */
+ irqctrler = irqctrler->next;
+ if (irqctrler && irqctrler->n_addrs > 0) {
+ addr = (unsigned long)
+ ioremap(irqctrler->addrs[0].address, 0x40);
+ for (i = 2; i < 4; ++i)
+ pmac_irq_hw[i] = (volatile struct pmac_irq_hw*)
+ (addr + (4 - i) * 0x10);
+ irq_cascade = irqctrler->intrs[0].line;
+ if (device_is_compatible(irqctrler, "gatwick"))
+ pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs);
+ }
+ } else {
+ /* older powermacs have a GC (grand central) or ohare at
+ f3000000, with interrupt control registers at f3000020. */
+ addr = (unsigned long) ioremap(0xf3000000, 0x40);
+ pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20);
+ }
+
+ /* PowerBooks 3400 and 3500 can have a second controller in a second
+ ohare chip, on the combo ethernet/modem card */
+ if (machine_is_compatible("AAPL,3400/2400")
+ || machine_is_compatible("AAPL,3500"))
+ irq_cascade = enable_second_ohare();
+
+ /* disable all interrupts in all controllers */
+ for (i = 0; i * 32 < max_irqs; ++i)
+ out_le32(&pmac_irq_hw[i]->enable, 0);
+ /* mark level interrupts */
+ for (i = 0; i < max_irqs; i++)
+ if (level_mask[i >> 5] & (1UL << (i & 0x1f)))
+ irq_desc[i].status = IRQ_LEVEL;
+
+ /* get interrupt line of secondary interrupt controller */
+ if (irq_cascade >= 0) {
+ printk(KERN_INFO "irq: secondary controller on irq %d\n",
+ (int)irq_cascade);
+ for ( i = max_real_irqs ; i < max_irqs ; i++ )
+ irq_desc[i].handler = &gatwick_pic;
+ setup_irq(irq_cascade, &gatwick_cascade_action);
+ }
+ printk("System has %d possible interrupts\n", max_irqs);
+ if (max_irqs != max_real_irqs)
+ printk(KERN_DEBUG "%d interrupts on main controller\n",
+ max_real_irqs);
+
+#ifdef CONFIG_XMON
+ setup_irq(20, &xmon_action);
+#endif /* CONFIG_XMON */
+}
+
+#ifdef CONFIG_PM
+/*
+ * These procedures are used in implementing sleep on the powerbooks.
+ * sleep_save_intrs() saves the states of all interrupt enables
+ * and disables all interrupts except for the nominated one.
+ * sleep_restore_intrs() restores the states of all interrupt enables.
+ */
+unsigned long sleep_save_mask[2];
+
+/* This used to be passed by the PMU driver but that link got
+ * broken with the new driver model. We use this tweak for now...
+ */
+static int pmacpic_find_viaint(void)
+{
+ int viaint = -1;
+
+#ifdef CONFIG_ADB_PMU
+ struct device_node *np;
+
+ if (pmu_get_model() != PMU_OHARE_BASED)
+ goto not_found;
+ np = of_find_node_by_name(NULL, "via-pmu");
+ if (np == NULL)
+ goto not_found;
+ viaint = np->intrs[0].line;
+#endif /* CONFIG_ADB_PMU */
+
+not_found:
+ return viaint;
+}
+
+static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+ int viaint = pmacpic_find_viaint();
+
+ sleep_save_mask[0] = ppc_cached_irq_mask[0];
+ sleep_save_mask[1] = ppc_cached_irq_mask[1];
+ ppc_cached_irq_mask[0] = 0;
+ ppc_cached_irq_mask[1] = 0;
+ if (viaint > 0)
+ set_bit(viaint, ppc_cached_irq_mask);
+ out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]);
+ if (max_real_irqs > 32)
+ out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]);
+ (void)in_le32(&pmac_irq_hw[0]->event);
+ /* make sure mask gets to controller before we return to caller */
+ mb();
+ (void)in_le32(&pmac_irq_hw[0]->enable);
+
+ return 0;
+}
+
+static int pmacpic_resume(struct sys_device *sysdev)
+{
+ int i;
+
+ out_le32(&pmac_irq_hw[0]->enable, 0);
+ if (max_real_irqs > 32)
+ out_le32(&pmac_irq_hw[1]->enable, 0);
+ mb();
+ for (i = 0; i < max_real_irqs; ++i)
+ if (test_bit(i, sleep_save_mask))
+ pmac_unmask_irq(i);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct sysdev_class pmacpic_sysclass = {
+ set_kset_name("pmac_pic"),
+};
+
+static struct sys_device device_pmacpic = {
+ .id = 0,
+ .cls = &pmacpic_sysclass,
+};
+
+static struct sysdev_driver driver_pmacpic = {
+#ifdef CONFIG_PM
+ .suspend = &pmacpic_suspend,
+ .resume = &pmacpic_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init init_pmacpic_sysfs(void)
+{
+ if (max_irqs == 0)
+ return -ENODEV;
+
+ printk(KERN_DEBUG "Registering pmac pic with sysfs...\n");
+ sysdev_class_register(&pmacpic_sysclass);
+ sysdev_register(&device_pmacpic);
+ sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic);
+ return 0;
+}
+
+subsys_initcall(init_pmacpic_sysfs);
+
diff --git a/arch/powerpc/platforms/powermac/pmac_pic.h b/arch/powerpc/platforms/powermac/pmac_pic.h
new file mode 100644
index 0000000..664103d
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_pic.h
@@ -0,0 +1,11 @@
+#ifndef __PPC_PLATFORMS_PMAC_PIC_H
+#define __PPC_PLATFORMS_PMAC_PIC_H
+
+#include <linux/irq.h>
+
+extern struct hw_interrupt_type pmac_pic;
+
+void pmac_pic_init(void);
+int pmac_get_irq(struct pt_regs *regs);
+
+#endif /* __PPC_PLATFORMS_PMAC_PIC_H */
diff --git a/arch/powerpc/platforms/powermac/pmac_setup.c b/arch/powerpc/platforms/powermac/pmac_setup.c
new file mode 100644
index 0000000..dbc921a0
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_setup.c
@@ -0,0 +1,662 @@
+/*
+ * arch/ppc/platforms/setup.c
+ *
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Adapted for Power Macintosh by Paul Mackerras
+ * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * Derived from "arch/alpha/kernel/setup.c"
+ * Copyright (C) 1995 Linus Torvalds
+ *
+ * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/bitops.h>
+#include <linux/suspend.h>
+
+#include <asm/reg.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/ohare.h>
+#include <asm/mediabay.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/bootx.h>
+#include <asm/cputable.h>
+#include <asm/btext.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/of_device.h>
+#include <asm/mmu_context.h>
+
+#include "pmac_pic.h"
+
+#undef SHOW_GATWICK_IRQS
+
+extern long pmac_time_init(void);
+extern unsigned long pmac_get_rtc_time(void);
+extern int pmac_set_rtc_time(unsigned long nowtime);
+extern void pmac_read_rtc_time(void);
+extern void pmac_calibrate_decr(void);
+extern void pmac_pcibios_fixup(void);
+extern void pmac_find_bridges(void);
+extern unsigned long pmac_ide_get_base(int index);
+extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
+ unsigned long data_port, unsigned long ctrl_port, int *irq);
+
+extern void pmac_nvram_update(void);
+extern unsigned char pmac_nvram_read_byte(int addr);
+extern void pmac_nvram_write_byte(int addr, unsigned char val);
+extern int pmac_pci_enable_device_hook(struct pci_dev *dev, int initial);
+extern void pmac_pcibios_after_init(void);
+extern int of_show_percpuinfo(struct seq_file *m, int i);
+
+unsigned char drive_info;
+
+int ppc_override_l2cr = 0;
+int ppc_override_l2cr_value;
+int has_l2cache = 0;
+
+static int current_root_goodness = -1;
+
+extern int pmac_newworld;
+
+#define DEFAULT_ROOT_DEVICE Root_SDA1 /* sda1 - slightly silly choice */
+
+extern void zs_kgdb_hook(int tty_num);
+static void ohare_init(void);
+#ifdef CONFIG_BOOTX_TEXT
+static void pmac_progress(char *s, unsigned short hex);
+#endif
+
+sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
+
+#ifdef CONFIG_SMP
+extern struct smp_ops_t psurge_smp_ops;
+extern struct smp_ops_t core99_smp_ops;
+#endif /* CONFIG_SMP */
+
+static int
+pmac_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *np;
+ char *pp;
+ int plen;
+ int mbmodel = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
+ NULL, PMAC_MB_INFO_MODEL, 0);
+ unsigned int mbflags = (unsigned int)pmac_call_feature(PMAC_FTR_GET_MB_INFO,
+ NULL, PMAC_MB_INFO_FLAGS, 0);
+ char* mbname;
+
+ if (pmac_call_feature(PMAC_FTR_GET_MB_INFO, NULL, PMAC_MB_INFO_NAME, (int)&mbname) != 0)
+ mbname = "Unknown";
+
+ /* find motherboard type */
+ seq_printf(m, "machine\t\t: ");
+ np = find_devices("device-tree");
+ if (np != NULL) {
+ pp = (char *) get_property(np, "model", NULL);
+ if (pp != NULL)
+ seq_printf(m, "%s\n", pp);
+ else
+ seq_printf(m, "PowerMac\n");
+ pp = (char *) get_property(np, "compatible", &plen);
+ if (pp != NULL) {
+ seq_printf(m, "motherboard\t:");
+ while (plen > 0) {
+ int l = strlen(pp) + 1;
+ seq_printf(m, " %s", pp);
+ plen -= l;
+ pp += l;
+ }
+ seq_printf(m, "\n");
+ }
+ } else
+ seq_printf(m, "PowerMac\n");
+
+ /* print parsed model */
+ seq_printf(m, "detected as\t: %d (%s)\n", mbmodel, mbname);
+ seq_printf(m, "pmac flags\t: %08x\n", mbflags);
+
+ /* find l2 cache info */
+ np = find_devices("l2-cache");
+ if (np == 0)
+ np = find_type_devices("cache");
+ if (np != 0) {
+ unsigned int *ic = (unsigned int *)
+ get_property(np, "i-cache-size", NULL);
+ unsigned int *dc = (unsigned int *)
+ get_property(np, "d-cache-size", NULL);
+ seq_printf(m, "L2 cache\t:");
+ has_l2cache = 1;
+ if (get_property(np, "cache-unified", NULL) != 0 && dc) {
+ seq_printf(m, " %dK unified", *dc / 1024);
+ } else {
+ if (ic)
+ seq_printf(m, " %dK instruction", *ic / 1024);
+ if (dc)
+ seq_printf(m, "%s %dK data",
+ (ic? " +": ""), *dc / 1024);
+ }
+ pp = get_property(np, "ram-type", NULL);
+ if (pp)
+ seq_printf(m, " %s", pp);
+ seq_printf(m, "\n");
+ }
+
+ /* find ram info */
+ np = find_devices("memory");
+ if (np != 0) {
+ int n;
+ struct reg_property *reg = (struct reg_property *)
+ get_property(np, "reg", &n);
+
+ if (reg != 0) {
+ unsigned long total = 0;
+
+ for (n /= sizeof(struct reg_property); n > 0; --n)
+ total += (reg++)->size;
+ seq_printf(m, "memory\t\t: %luMB\n", total >> 20);
+ }
+ }
+
+ /* Checks "l2cr-value" property in the registry */
+ np = find_devices("cpus");
+ if (np == 0)
+ np = find_type_devices("cpu");
+ if (np != 0) {
+ unsigned int *l2cr = (unsigned int *)
+ get_property(np, "l2cr-value", NULL);
+ if (l2cr != 0) {
+ seq_printf(m, "l2cr override\t: 0x%x\n", *l2cr);
+ }
+ }
+
+ /* Indicate newworld/oldworld */
+ seq_printf(m, "pmac-generation\t: %s\n",
+ pmac_newworld ? "NewWorld" : "OldWorld");
+
+
+ return 0;
+}
+
+static int
+pmac_show_percpuinfo(struct seq_file *m, int i)
+{
+#ifdef CONFIG_CPU_FREQ_PMAC
+ extern unsigned int pmac_get_one_cpufreq(int i);
+ unsigned int freq = pmac_get_one_cpufreq(i);
+ if (freq != 0) {
+ seq_printf(m, "clock\t\t: %dMHz\n", freq/1000);
+ return 0;
+ }
+#endif /* CONFIG_CPU_FREQ_PMAC */
+ return of_show_percpuinfo(m, i);
+}
+
+static volatile u32 *sysctrl_regs;
+
+void __init
+pmac_setup_arch(void)
+{
+ struct device_node *cpu;
+ int *fp;
+ unsigned long pvr;
+
+ pvr = PVR_VER(mfspr(SPRN_PVR));
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ cpu = find_type_devices("cpu");
+ if (cpu != 0) {
+ fp = (int *) get_property(cpu, "clock-frequency", NULL);
+ if (fp != 0) {
+ if (pvr == 4 || pvr >= 8)
+ /* 604, G3, G4 etc. */
+ loops_per_jiffy = *fp / HZ;
+ else
+ /* 601, 603, etc. */
+ loops_per_jiffy = *fp / (2*HZ);
+ } else
+ loops_per_jiffy = 50000000 / HZ;
+ }
+
+ /* this area has the CPU identification register
+ and some registers used by smp boards */
+ sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000);
+ ohare_init();
+
+ /* Lookup PCI hosts */
+ pmac_find_bridges();
+
+ /* Checks "l2cr-value" property in the registry */
+ if (cpu_has_feature(CPU_FTR_L2CR)) {
+ struct device_node *np = find_devices("cpus");
+ if (np == 0)
+ np = find_type_devices("cpu");
+ if (np != 0) {
+ unsigned int *l2cr = (unsigned int *)
+ get_property(np, "l2cr-value", NULL);
+ if (l2cr != 0) {
+ ppc_override_l2cr = 1;
+ ppc_override_l2cr_value = *l2cr;
+ _set_L2CR(0);
+ _set_L2CR(ppc_override_l2cr_value);
+ }
+ }
+ }
+
+ if (ppc_override_l2cr)
+ printk(KERN_INFO "L2CR overriden (0x%x), backside cache is %s\n",
+ ppc_override_l2cr_value, (ppc_override_l2cr_value & 0x80000000)
+ ? "enabled" : "disabled");
+
+#ifdef CONFIG_KGDB
+ zs_kgdb_hook(0);
+#endif
+
+#ifdef CONFIG_ADB_CUDA
+ find_via_cuda();
+#else
+ if (find_devices("via-cuda")) {
+ printk("WARNING ! Your machine is Cuda based but your kernel\n");
+ printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n");
+ }
+#endif
+#ifdef CONFIG_ADB_PMU
+ find_via_pmu();
+#else
+ if (find_devices("via-pmu")) {
+ printk("WARNING ! Your machine is PMU based but your kernel\n");
+ printk(" wasn't compiled with CONFIG_ADB_PMU option !\n");
+ }
+#endif
+#ifdef CONFIG_NVRAM
+ pmac_nvram_init();
+#endif
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+ ROOT_DEV = DEFAULT_ROOT_DEVICE;
+
+#ifdef CONFIG_SMP
+ /* Check for Core99 */
+ if (find_devices("uni-n") || find_devices("u3"))
+ ppc_md.smp_ops = &core99_smp_ops;
+ else
+ ppc_md.smp_ops = &psurge_smp_ops;
+#endif /* CONFIG_SMP */
+
+ pci_create_OF_bus_map();
+}
+
+static void __init ohare_init(void)
+{
+ /*
+ * Turn on the L2 cache.
+ * We assume that we have a PSX memory controller iff
+ * we have an ohare I/O controller.
+ */
+ if (find_devices("ohare") != NULL) {
+ if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) {
+ if (sysctrl_regs[4] & 0x10)
+ sysctrl_regs[4] |= 0x04000020;
+ else
+ sysctrl_regs[4] |= 0x04000000;
+ if(has_l2cache)
+ printk(KERN_INFO "Level 2 cache enabled\n");
+ }
+ }
+}
+
+extern char *bootpath;
+extern char *bootdevice;
+void *boot_host;
+int boot_target;
+int boot_part;
+extern dev_t boot_dev;
+
+#ifdef CONFIG_SCSI
+void __init
+note_scsi_host(struct device_node *node, void *host)
+{
+ int l;
+ char *p;
+
+ l = strlen(node->full_name);
+ if (bootpath != NULL && bootdevice != NULL
+ && strncmp(node->full_name, bootdevice, l) == 0
+ && (bootdevice[l] == '/' || bootdevice[l] == 0)) {
+ boot_host = host;
+ /*
+ * There's a bug in OF 1.0.5. (Why am I not surprised.)
+ * If you pass a path like scsi/sd@1:0 to canon, it returns
+ * something like /bandit@F2000000/gc@10/53c94@10000/sd@0,0
+ * That is, the scsi target number doesn't get preserved.
+ * So we pick the target number out of bootpath and use that.
+ */
+ p = strstr(bootpath, "/sd@");
+ if (p != NULL) {
+ p += 4;
+ boot_target = simple_strtoul(p, NULL, 10);
+ p = strchr(p, ':');
+ if (p != NULL)
+ boot_part = simple_strtoul(p + 1, NULL, 10);
+ }
+ }
+}
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
+static dev_t __init
+find_ide_boot(void)
+{
+ char *p;
+ int n;
+ dev_t __init pmac_find_ide_boot(char *bootdevice, int n);
+
+ if (bootdevice == NULL)
+ return 0;
+ p = strrchr(bootdevice, '/');
+ if (p == NULL)
+ return 0;
+ n = p - bootdevice;
+
+ return pmac_find_ide_boot(bootdevice, n);
+}
+#endif /* CONFIG_BLK_DEV_IDE && CONFIG_BLK_DEV_IDE_PMAC */
+
+static void __init
+find_boot_device(void)
+{
+#if defined(CONFIG_BLK_DEV_IDE) && defined(CONFIG_BLK_DEV_IDE_PMAC)
+ boot_dev = find_ide_boot();
+#endif
+}
+
+static int initializing = 1;
+/* TODO: Merge the suspend-to-ram with the common code !!!
+ * currently, this is a stub implementation for suspend-to-disk
+ * only
+ */
+
+#ifdef CONFIG_SOFTWARE_SUSPEND
+
+static int pmac_pm_prepare(suspend_state_t state)
+{
+ printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
+
+ return 0;
+}
+
+static int pmac_pm_enter(suspend_state_t state)
+{
+ printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
+
+ /* Giveup the lazy FPU & vec so we don't have to back them
+ * up from the low level code
+ */
+ enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+ if (cur_cpu_spec[0]->cpu_features & CPU_FTR_ALTIVEC)
+ enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+ return 0;
+}
+
+static int pmac_pm_finish(suspend_state_t state)
+{
+ printk(KERN_DEBUG "%s(%d)\n", __FUNCTION__, state);
+
+ /* Restore userland MMU context */
+ set_context(current->active_mm->context, current->active_mm->pgd);
+
+ return 0;
+}
+
+static struct pm_ops pmac_pm_ops = {
+ .pm_disk_mode = PM_DISK_SHUTDOWN,
+ .prepare = pmac_pm_prepare,
+ .enter = pmac_pm_enter,
+ .finish = pmac_pm_finish,
+};
+
+#endif /* CONFIG_SOFTWARE_SUSPEND */
+
+static int pmac_late_init(void)
+{
+ initializing = 0;
+#ifdef CONFIG_SOFTWARE_SUSPEND
+ pm_set_ops(&pmac_pm_ops);
+#endif /* CONFIG_SOFTWARE_SUSPEND */
+ return 0;
+}
+
+late_initcall(pmac_late_init);
+
+/* can't be __init - can be called whenever a disk is first accessed */
+void
+note_bootable_part(dev_t dev, int part, int goodness)
+{
+ static int found_boot = 0;
+ char *p;
+
+ if (!initializing)
+ return;
+ if ((goodness <= current_root_goodness) &&
+ ROOT_DEV != DEFAULT_ROOT_DEVICE)
+ return;
+ p = strstr(saved_command_line, "root=");
+ if (p != NULL && (p == saved_command_line || p[-1] == ' '))
+ return;
+
+ if (!found_boot) {
+ find_boot_device();
+ found_boot = 1;
+ }
+ if (!boot_dev || dev == boot_dev) {
+ ROOT_DEV = dev + part;
+ boot_dev = 0;
+ current_root_goodness = goodness;
+ }
+}
+
+static void
+pmac_restart(char *cmd)
+{
+#ifdef CONFIG_ADB_CUDA
+ struct adb_request req;
+#endif /* CONFIG_ADB_CUDA */
+
+ switch (sys_ctrler) {
+#ifdef CONFIG_ADB_CUDA
+ case SYS_CTRLER_CUDA:
+ cuda_request(&req, NULL, 2, CUDA_PACKET,
+ CUDA_RESET_SYSTEM);
+ for (;;)
+ cuda_poll();
+ break;
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_ADB_PMU
+ case SYS_CTRLER_PMU:
+ pmu_restart();
+ break;
+#endif /* CONFIG_ADB_PMU */
+ default: ;
+ }
+}
+
+static void
+pmac_power_off(void)
+{
+#ifdef CONFIG_ADB_CUDA
+ struct adb_request req;
+#endif /* CONFIG_ADB_CUDA */
+
+ switch (sys_ctrler) {
+#ifdef CONFIG_ADB_CUDA
+ case SYS_CTRLER_CUDA:
+ cuda_request(&req, NULL, 2, CUDA_PACKET,
+ CUDA_POWERDOWN);
+ for (;;)
+ cuda_poll();
+ break;
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_ADB_PMU
+ case SYS_CTRLER_PMU:
+ pmu_shutdown();
+ break;
+#endif /* CONFIG_ADB_PMU */
+ default: ;
+ }
+}
+
+static void
+pmac_halt(void)
+{
+ pmac_power_off();
+}
+
+void __init
+pmac_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* isa_io_base gets set in pmac_find_bridges */
+ isa_mem_base = PMAC_ISA_MEM_BASE;
+ pci_dram_offset = PMAC_PCI_DRAM_OFFSET;
+ ISA_DMA_THRESHOLD = ~0L;
+ DMA_MODE_READ = 1;
+ DMA_MODE_WRITE = 2;
+
+ ppc_md.setup_arch = pmac_setup_arch;
+ ppc_md.show_cpuinfo = pmac_show_cpuinfo;
+ ppc_md.show_percpuinfo = pmac_show_percpuinfo;
+ ppc_md.irq_canonicalize = NULL;
+ ppc_md.init_IRQ = pmac_pic_init;
+ ppc_md.get_irq = pmac_get_irq; /* Changed later on ... */
+
+ ppc_md.pcibios_fixup = pmac_pcibios_fixup;
+ ppc_md.pcibios_enable_device_hook = pmac_pci_enable_device_hook;
+ ppc_md.pcibios_after_init = pmac_pcibios_after_init;
+ ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
+
+ ppc_md.restart = pmac_restart;
+ ppc_md.power_off = pmac_power_off;
+ ppc_md.halt = pmac_halt;
+
+ ppc_md.time_init = pmac_time_init;
+ ppc_md.set_rtc_time = pmac_set_rtc_time;
+ ppc_md.get_rtc_time = pmac_get_rtc_time;
+ ppc_md.calibrate_decr = pmac_calibrate_decr;
+
+ ppc_md.feature_call = pmac_do_feature_call;
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+ ppc_ide_md.ide_init_hwif = pmac_ide_init_hwif_ports;
+ ppc_ide_md.default_io_base = pmac_ide_get_base;
+#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
+
+#ifdef CONFIG_BOOTX_TEXT
+ ppc_md.progress = pmac_progress;
+#endif /* CONFIG_BOOTX_TEXT */
+
+ if (ppc_md.progress) ppc_md.progress("pmac_init(): exit", 0);
+
+}
+
+#ifdef CONFIG_BOOTX_TEXT
+static void __init
+pmac_progress(char *s, unsigned short hex)
+{
+ if (boot_text_mapped) {
+ btext_drawstring(s);
+ btext_drawchar('\n');
+ }
+}
+#endif /* CONFIG_BOOTX_TEXT */
+
+static int __init
+pmac_declare_of_platform_devices(void)
+{
+ struct device_node *np;
+
+ np = find_devices("uni-n");
+ if (np) {
+ for (np = np->child; np != NULL; np = np->sibling)
+ if (strncmp(np->name, "i2c", 3) == 0) {
+ of_platform_device_create(np, "uni-n-i2c",
+ NULL);
+ break;
+ }
+ }
+ np = find_devices("u3");
+ if (np) {
+ for (np = np->child; np != NULL; np = np->sibling)
+ if (strncmp(np->name, "i2c", 3) == 0) {
+ of_platform_device_create(np, "u3-i2c",
+ NULL);
+ break;
+ }
+ }
+
+ np = find_devices("valkyrie");
+ if (np)
+ of_platform_device_create(np, "valkyrie", NULL);
+ np = find_devices("platinum");
+ if (np)
+ of_platform_device_create(np, "platinum", NULL);
+
+ return 0;
+}
+
+device_initcall(pmac_declare_of_platform_devices);
diff --git a/arch/powerpc/platforms/powermac/pmac_sleep.S b/arch/powerpc/platforms/powermac/pmac_sleep.S
new file mode 100644
index 0000000..88419c7
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_sleep.S
@@ -0,0 +1,396 @@
+/*
+ * This file contains sleep low-level functions for PowerBook G3.
+ * Copyright (C) 1999 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ * and Paul Mackerras (paulus@samba.org).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+#define MAGIC 0x4c617273 /* 'Lars' */
+
+/*
+ * Structure for storing CPU registers on the stack.
+ */
+#define SL_SP 0
+#define SL_PC 4
+#define SL_MSR 8
+#define SL_SDR1 0xc
+#define SL_SPRG0 0x10 /* 4 sprg's */
+#define SL_DBAT0 0x20
+#define SL_IBAT0 0x28
+#define SL_DBAT1 0x30
+#define SL_IBAT1 0x38
+#define SL_DBAT2 0x40
+#define SL_IBAT2 0x48
+#define SL_DBAT3 0x50
+#define SL_IBAT3 0x58
+#define SL_TB 0x60
+#define SL_R2 0x68
+#define SL_CR 0x6c
+#define SL_R12 0x70 /* r12 to r31 */
+#define SL_SIZE (SL_R12 + 80)
+
+ .section .text
+ .align 5
+
+#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC)
+
+/* This gets called by via-pmu.c late during the sleep process.
+ * The PMU was already send the sleep command and will shut us down
+ * soon. We need to save all that is needed and setup the wakeup
+ * vector that will be called by the ROM on wakeup
+ */
+_GLOBAL(low_sleep_handler)
+#ifndef CONFIG_6xx
+ blr
+#else
+ mflr r0
+ stw r0,4(r1)
+ stwu r1,-SL_SIZE(r1)
+ mfcr r0
+ stw r0,SL_CR(r1)
+ stw r2,SL_R2(r1)
+ stmw r12,SL_R12(r1)
+
+ /* Save MSR & SDR1 */
+ mfmsr r4
+ stw r4,SL_MSR(r1)
+ mfsdr1 r4
+ stw r4,SL_SDR1(r1)
+
+ /* Get a stable timebase and save it */
+1: mftbu r4
+ stw r4,SL_TB(r1)
+ mftb r5
+ stw r5,SL_TB+4(r1)
+ mftbu r3
+ cmpw r3,r4
+ bne 1b
+
+ /* Save SPRGs */
+ mfsprg r4,0
+ stw r4,SL_SPRG0(r1)
+ mfsprg r4,1
+ stw r4,SL_SPRG0+4(r1)
+ mfsprg r4,2
+ stw r4,SL_SPRG0+8(r1)
+ mfsprg r4,3
+ stw r4,SL_SPRG0+12(r1)
+
+ /* Save BATs */
+ mfdbatu r4,0
+ stw r4,SL_DBAT0(r1)
+ mfdbatl r4,0
+ stw r4,SL_DBAT0+4(r1)
+ mfdbatu r4,1
+ stw r4,SL_DBAT1(r1)
+ mfdbatl r4,1
+ stw r4,SL_DBAT1+4(r1)
+ mfdbatu r4,2
+ stw r4,SL_DBAT2(r1)
+ mfdbatl r4,2
+ stw r4,SL_DBAT2+4(r1)
+ mfdbatu r4,3
+ stw r4,SL_DBAT3(r1)
+ mfdbatl r4,3
+ stw r4,SL_DBAT3+4(r1)
+ mfibatu r4,0
+ stw r4,SL_IBAT0(r1)
+ mfibatl r4,0
+ stw r4,SL_IBAT0+4(r1)
+ mfibatu r4,1
+ stw r4,SL_IBAT1(r1)
+ mfibatl r4,1
+ stw r4,SL_IBAT1+4(r1)
+ mfibatu r4,2
+ stw r4,SL_IBAT2(r1)
+ mfibatl r4,2
+ stw r4,SL_IBAT2+4(r1)
+ mfibatu r4,3
+ stw r4,SL_IBAT3(r1)
+ mfibatl r4,3
+ stw r4,SL_IBAT3+4(r1)
+
+ /* Backup various CPU config stuffs */
+ bl __save_cpu_setup
+
+ /* The ROM can wake us up via 2 different vectors:
+ * - On wallstreet & lombard, we must write a magic
+ * value 'Lars' at address 4 and a pointer to a
+ * memory location containing the PC to resume from
+ * at address 0.
+ * - On Core99, we must store the wakeup vector at
+ * address 0x80 and eventually it's parameters
+ * at address 0x84. I've have some trouble with those
+ * parameters however and I no longer use them.
+ */
+ lis r5,grackle_wake_up@ha
+ addi r5,r5,grackle_wake_up@l
+ tophys(r5,r5)
+ stw r5,SL_PC(r1)
+ lis r4,KERNELBASE@h
+ tophys(r5,r1)
+ addi r5,r5,SL_PC
+ lis r6,MAGIC@ha
+ addi r6,r6,MAGIC@l
+ stw r5,0(r4)
+ stw r6,4(r4)
+ /* Setup stuffs at 0x80-0x84 for Core99 */
+ lis r3,core99_wake_up@ha
+ addi r3,r3,core99_wake_up@l
+ tophys(r3,r3)
+ stw r3,0x80(r4)
+ stw r5,0x84(r4)
+ /* Store a pointer to our backup storage into
+ * a kernel global
+ */
+ lis r3,sleep_storage@ha
+ addi r3,r3,sleep_storage@l
+ stw r5,0(r3)
+
+ .globl low_cpu_die
+low_cpu_die:
+ /* Flush & disable all caches */
+ bl flush_disable_caches
+
+ /* Turn off data relocation. */
+ mfmsr r3 /* Save MSR in r7 */
+ rlwinm r3,r3,0,28,26 /* Turn off DR bit */
+ sync
+ mtmsr r3
+ isync
+
+BEGIN_FTR_SECTION
+ /* Flush any pending L2 data prefetches to work around HW bug */
+ sync
+ lis r3,0xfff0
+ lwz r0,0(r3) /* perform cache-inhibited load to ROM */
+ sync /* (caches are disabled at this point) */
+END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
+
+/*
+ * Set the HID0 and MSR for sleep.
+ */
+ mfspr r2,SPRN_HID0
+ rlwinm r2,r2,0,10,7 /* clear doze, nap */
+ oris r2,r2,HID0_SLEEP@h
+ sync
+ isync
+ mtspr SPRN_HID0,r2
+ sync
+
+/* This loop puts us back to sleep in case we have a spurrious
+ * wakeup so that the host bridge properly stays asleep. The
+ * CPU will be turned off, either after a known time (about 1
+ * second) on wallstreet & lombard, or as soon as the CPU enters
+ * SLEEP mode on core99
+ */
+ mfmsr r2
+ oris r2,r2,MSR_POW@h
+1: sync
+ mtmsr r2
+ isync
+ b 1b
+
+/*
+ * Here is the resume code.
+ */
+
+
+/*
+ * Core99 machines resume here
+ * r4 has the physical address of SL_PC(sp) (unused)
+ */
+_GLOBAL(core99_wake_up)
+ /* Make sure HID0 no longer contains any sleep bit and that data cache
+ * is disabled
+ */
+ mfspr r3,SPRN_HID0
+ rlwinm r3,r3,0,11,7 /* clear SLEEP, NAP, DOZE bits */
+ rlwinm 3,r3,0,18,15 /* clear DCE, ICE */
+ mtspr SPRN_HID0,r3
+ sync
+ isync
+
+ /* sanitize MSR */
+ mfmsr r3
+ ori r3,r3,MSR_EE|MSR_IP
+ xori r3,r3,MSR_EE|MSR_IP
+ sync
+ isync
+ mtmsr r3
+ sync
+ isync
+
+ /* Recover sleep storage */
+ lis r3,sleep_storage@ha
+ addi r3,r3,sleep_storage@l
+ tophys(r3,r3)
+ lwz r1,0(r3)
+
+ /* Pass thru to older resume code ... */
+/*
+ * Here is the resume code for older machines.
+ * r1 has the physical address of SL_PC(sp).
+ */
+
+grackle_wake_up:
+
+ /* Restore the kernel's segment registers before
+ * we do any r1 memory access as we are not sure they
+ * are in a sane state above the first 256Mb region
+ */
+ li r0,16 /* load up segment register values */
+ mtctr r0 /* for context 0 */
+ lis r3,0x2000 /* Ku = 1, VSID = 0 */
+ li r4,0
+3: mtsrin r3,r4
+ addi r3,r3,0x111 /* increment VSID */
+ addis r4,r4,0x1000 /* address of next segment */
+ bdnz 3b
+ sync
+ isync
+
+ subi r1,r1,SL_PC
+
+ /* Restore various CPU config stuffs */
+ bl __restore_cpu_setup
+
+ /* Make sure all FPRs have been initialized */
+ bl reloc_offset
+ bl __init_fpu_registers
+
+ /* Invalidate & enable L1 cache, we don't care about
+ * whatever the ROM may have tried to write to memory
+ */
+ bl __inval_enable_L1
+
+ /* Restore the BATs, and SDR1. Then we can turn on the MMU. */
+ lwz r4,SL_SDR1(r1)
+ mtsdr1 r4
+ lwz r4,SL_SPRG0(r1)
+ mtsprg 0,r4
+ lwz r4,SL_SPRG0+4(r1)
+ mtsprg 1,r4
+ lwz r4,SL_SPRG0+8(r1)
+ mtsprg 2,r4
+ lwz r4,SL_SPRG0+12(r1)
+ mtsprg 3,r4
+
+ lwz r4,SL_DBAT0(r1)
+ mtdbatu 0,r4
+ lwz r4,SL_DBAT0+4(r1)
+ mtdbatl 0,r4
+ lwz r4,SL_DBAT1(r1)
+ mtdbatu 1,r4
+ lwz r4,SL_DBAT1+4(r1)
+ mtdbatl 1,r4
+ lwz r4,SL_DBAT2(r1)
+ mtdbatu 2,r4
+ lwz r4,SL_DBAT2+4(r1)
+ mtdbatl 2,r4
+ lwz r4,SL_DBAT3(r1)
+ mtdbatu 3,r4
+ lwz r4,SL_DBAT3+4(r1)
+ mtdbatl 3,r4
+ lwz r4,SL_IBAT0(r1)
+ mtibatu 0,r4
+ lwz r4,SL_IBAT0+4(r1)
+ mtibatl 0,r4
+ lwz r4,SL_IBAT1(r1)
+ mtibatu 1,r4
+ lwz r4,SL_IBAT1+4(r1)
+ mtibatl 1,r4
+ lwz r4,SL_IBAT2(r1)
+ mtibatu 2,r4
+ lwz r4,SL_IBAT2+4(r1)
+ mtibatl 2,r4
+ lwz r4,SL_IBAT3(r1)
+ mtibatu 3,r4
+ lwz r4,SL_IBAT3+4(r1)
+ mtibatl 3,r4
+
+BEGIN_FTR_SECTION
+ li r4,0
+ mtspr SPRN_DBAT4U,r4
+ mtspr SPRN_DBAT4L,r4
+ mtspr SPRN_DBAT5U,r4
+ mtspr SPRN_DBAT5L,r4
+ mtspr SPRN_DBAT6U,r4
+ mtspr SPRN_DBAT6L,r4
+ mtspr SPRN_DBAT7U,r4
+ mtspr SPRN_DBAT7L,r4
+ mtspr SPRN_IBAT4U,r4
+ mtspr SPRN_IBAT4L,r4
+ mtspr SPRN_IBAT5U,r4
+ mtspr SPRN_IBAT5L,r4
+ mtspr SPRN_IBAT6U,r4
+ mtspr SPRN_IBAT6L,r4
+ mtspr SPRN_IBAT7U,r4
+ mtspr SPRN_IBAT7L,r4
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+
+ /* Flush all TLBs */
+ lis r4,0x1000
+1: addic. r4,r4,-0x1000
+ tlbie r4
+ blt 1b
+ sync
+
+ /* restore the MSR and turn on the MMU */
+ lwz r3,SL_MSR(r1)
+ bl turn_on_mmu
+
+ /* get back the stack pointer */
+ tovirt(r1,r1)
+
+ /* Restore TB */
+ li r3,0
+ mttbl r3
+ lwz r3,SL_TB(r1)
+ lwz r4,SL_TB+4(r1)
+ mttbu r3
+ mttbl r4
+
+ /* Restore the callee-saved registers and return */
+ lwz r0,SL_CR(r1)
+ mtcr r0
+ lwz r2,SL_R2(r1)
+ lmw r12,SL_R12(r1)
+ addi r1,r1,SL_SIZE
+ lwz r0,4(r1)
+ mtlr r0
+ blr
+
+turn_on_mmu:
+ mflr r4
+ tovirt(r4,r4)
+ mtsrr0 r4
+ mtsrr1 r3
+ sync
+ isync
+ rfi
+
+#endif /* defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ) */
+
+ .section .data
+ .balign L1_CACHE_LINE_SIZE
+sleep_storage:
+ .long 0
+ .balign L1_CACHE_LINE_SIZE, 0
+
+#endif /* CONFIG_6xx */
+ .section .text
diff --git a/arch/powerpc/platforms/powermac/pmac_smp.c b/arch/powerpc/platforms/powermac/pmac_smp.c
new file mode 100644
index 0000000..995e909
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_smp.c
@@ -0,0 +1,716 @@
+/*
+ * SMP support for power macintosh.
+ *
+ * We support both the old "powersurge" SMP architecture
+ * and the current Core99 (G4 PowerMac) machines.
+ *
+ * Note that we don't support the very first rev. of
+ * Apple/DayStar 2 CPUs board, the one with the funky
+ * watchdog. Hopefully, none of these should be there except
+ * maybe internally to Apple. I should probably still add some
+ * code to detect this card though and disable SMP. --BenH.
+ *
+ * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
+ * and Ben Herrenschmidt <benh@kernel.crashing.org>.
+ *
+ * Support for DayStar quad CPU cards
+ * Copyright (C) XLR8, Inc. 1994-2000
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+#include <linux/cpu.h>
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/smp.h>
+#include <asm/residual.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/open_pic.h>
+#include <asm/cacheflush.h>
+#include <asm/keylargo.h>
+
+/*
+ * Powersurge (old powermac SMP) support.
+ */
+
+extern void __secondary_start_pmac_0(void);
+
+/* Addresses for powersurge registers */
+#define HAMMERHEAD_BASE 0xf8000000
+#define HHEAD_CONFIG 0x90
+#define HHEAD_SEC_INTR 0xc0
+
+/* register for interrupting the primary processor on the powersurge */
+/* N.B. this is actually the ethernet ROM! */
+#define PSURGE_PRI_INTR 0xf3019000
+
+/* register for storing the start address for the secondary processor */
+/* N.B. this is the PCI config space address register for the 1st bridge */
+#define PSURGE_START 0xf2800000
+
+/* Daystar/XLR8 4-CPU card */
+#define PSURGE_QUAD_REG_ADDR 0xf8800000
+
+#define PSURGE_QUAD_IRQ_SET 0
+#define PSURGE_QUAD_IRQ_CLR 1
+#define PSURGE_QUAD_IRQ_PRIMARY 2
+#define PSURGE_QUAD_CKSTOP_CTL 3
+#define PSURGE_QUAD_PRIMARY_ARB 4
+#define PSURGE_QUAD_BOARD_ID 6
+#define PSURGE_QUAD_WHICH_CPU 7
+#define PSURGE_QUAD_CKSTOP_RDBK 8
+#define PSURGE_QUAD_RESET_CTL 11
+
+#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v)))
+#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
+#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
+#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
+
+/* virtual addresses for the above */
+static volatile u8 __iomem *hhead_base;
+static volatile u8 __iomem *quad_base;
+static volatile u32 __iomem *psurge_pri_intr;
+static volatile u8 __iomem *psurge_sec_intr;
+static volatile u32 __iomem *psurge_start;
+
+/* values for psurge_type */
+#define PSURGE_NONE -1
+#define PSURGE_DUAL 0
+#define PSURGE_QUAD_OKEE 1
+#define PSURGE_QUAD_COTTON 2
+#define PSURGE_QUAD_ICEGRASS 3
+
+/* what sort of powersurge board we have */
+static int psurge_type = PSURGE_NONE;
+
+/* L2 and L3 cache settings to pass from CPU0 to CPU1 */
+volatile static long int core99_l2_cache;
+volatile static long int core99_l3_cache;
+
+/* Timebase freeze GPIO */
+static unsigned int core99_tb_gpio;
+
+/* Sync flag for HW tb sync */
+static volatile int sec_tb_reset = 0;
+static unsigned int pri_tb_hi, pri_tb_lo;
+static unsigned int pri_tb_stamp;
+
+static void __devinit core99_init_caches(int cpu)
+{
+ if (!cpu_has_feature(CPU_FTR_L2CR))
+ return;
+
+ if (cpu == 0) {
+ core99_l2_cache = _get_L2CR();
+ printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+ } else {
+ printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+ _set_L2CR(0);
+ _set_L2CR(core99_l2_cache);
+ printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
+ }
+
+ if (!cpu_has_feature(CPU_FTR_L3CR))
+ return;
+
+ if (cpu == 0){
+ core99_l3_cache = _get_L3CR();
+ printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+ } else {
+ printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+ _set_L3CR(0);
+ _set_L3CR(core99_l3_cache);
+ printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
+ }
+}
+
+/*
+ * Set and clear IPIs for powersurge.
+ */
+static inline void psurge_set_ipi(int cpu)
+{
+ if (psurge_type == PSURGE_NONE)
+ return;
+ if (cpu == 0)
+ in_be32(psurge_pri_intr);
+ else if (psurge_type == PSURGE_DUAL)
+ out_8(psurge_sec_intr, 0);
+ else
+ PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
+}
+
+static inline void psurge_clr_ipi(int cpu)
+{
+ if (cpu > 0) {
+ switch(psurge_type) {
+ case PSURGE_DUAL:
+ out_8(psurge_sec_intr, ~0);
+ case PSURGE_NONE:
+ break;
+ default:
+ PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
+ }
+ }
+}
+
+/*
+ * On powersurge (old SMP powermac architecture) we don't have
+ * separate IPIs for separate messages like openpic does. Instead
+ * we have a bitmap for each processor, where a 1 bit means that
+ * the corresponding message is pending for that processor.
+ * Ideally each cpu's entry would be in a different cache line.
+ * -- paulus.
+ */
+static unsigned long psurge_smp_message[NR_CPUS];
+
+void psurge_smp_message_recv(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ int msg;
+
+ /* clear interrupt */
+ psurge_clr_ipi(cpu);
+
+ if (num_online_cpus() < 2)
+ return;
+
+ /* make sure there is a message there */
+ for (msg = 0; msg < 4; msg++)
+ if (test_and_clear_bit(msg, &psurge_smp_message[cpu]))
+ smp_message_recv(msg, regs);
+}
+
+irqreturn_t psurge_primary_intr(int irq, void *d, struct pt_regs *regs)
+{
+ psurge_smp_message_recv(regs);
+ return IRQ_HANDLED;
+}
+
+static void smp_psurge_message_pass(int target, int msg, unsigned long data,
+ int wait)
+{
+ int i;
+
+ if (num_online_cpus() < 2)
+ return;
+
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_online(i))
+ continue;
+ if (target == MSG_ALL
+ || (target == MSG_ALL_BUT_SELF && i != smp_processor_id())
+ || target == i) {
+ set_bit(msg, &psurge_smp_message[i]);
+ psurge_set_ipi(i);
+ }
+ }
+}
+
+/*
+ * Determine a quad card presence. We read the board ID register, we
+ * force the data bus to change to something else, and we read it again.
+ * It it's stable, then the register probably exist (ugh !)
+ */
+static int __init psurge_quad_probe(void)
+{
+ int type;
+ unsigned int i;
+
+ type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
+ if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
+ || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+ return PSURGE_DUAL;
+
+ /* looks OK, try a slightly more rigorous test */
+ /* bogus is not necessarily cacheline-aligned,
+ though I don't suppose that really matters. -- paulus */
+ for (i = 0; i < 100; i++) {
+ volatile u32 bogus[8];
+ bogus[(0+i)%8] = 0x00000000;
+ bogus[(1+i)%8] = 0x55555555;
+ bogus[(2+i)%8] = 0xFFFFFFFF;
+ bogus[(3+i)%8] = 0xAAAAAAAA;
+ bogus[(4+i)%8] = 0x33333333;
+ bogus[(5+i)%8] = 0xCCCCCCCC;
+ bogus[(6+i)%8] = 0xCCCCCCCC;
+ bogus[(7+i)%8] = 0x33333333;
+ wmb();
+ asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
+ mb();
+ if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+ return PSURGE_DUAL;
+ }
+ return type;
+}
+
+static void __init psurge_quad_init(void)
+{
+ int procbits;
+
+ if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
+ procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
+ if (psurge_type == PSURGE_QUAD_ICEGRASS)
+ PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+ else
+ PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
+ mdelay(33);
+ out_8(psurge_sec_intr, ~0);
+ PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
+ PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+ if (psurge_type != PSURGE_QUAD_ICEGRASS)
+ PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
+ PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
+ mdelay(33);
+ PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
+ mdelay(33);
+ PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
+ mdelay(33);
+}
+
+static int __init smp_psurge_probe(void)
+{
+ int i, ncpus;
+
+ /* We don't do SMP on the PPC601 -- paulus */
+ if (PVR_VER(mfspr(SPRN_PVR)) == 1)
+ return 1;
+
+ /*
+ * The powersurge cpu board can be used in the generation
+ * of powermacs that have a socket for an upgradeable cpu card,
+ * including the 7500, 8500, 9500, 9600.
+ * The device tree doesn't tell you if you have 2 cpus because
+ * OF doesn't know anything about the 2nd processor.
+ * Instead we look for magic bits in magic registers,
+ * in the hammerhead memory controller in the case of the
+ * dual-cpu powersurge board. -- paulus.
+ */
+ if (find_devices("hammerhead") == NULL)
+ return 1;
+
+ hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
+ quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
+ psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
+
+ psurge_type = psurge_quad_probe();
+ if (psurge_type != PSURGE_DUAL) {
+ psurge_quad_init();
+ /* All released cards using this HW design have 4 CPUs */
+ ncpus = 4;
+ } else {
+ iounmap(quad_base);
+ if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
+ /* not a dual-cpu card */
+ iounmap(hhead_base);
+ psurge_type = PSURGE_NONE;
+ return 1;
+ }
+ ncpus = 2;
+ }
+
+ psurge_start = ioremap(PSURGE_START, 4);
+ psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
+
+ /* this is not actually strictly necessary -- paulus. */
+ for (i = 1; i < ncpus; ++i)
+ smp_hw_index[i] = i;
+
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
+
+ return ncpus;
+}
+
+static void __init smp_psurge_kick_cpu(int nr)
+{
+ unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
+ unsigned long a;
+
+ /* may need to flush here if secondary bats aren't setup */
+ for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
+ asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
+ asm volatile("sync");
+
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+
+ out_be32(psurge_start, start);
+ mb();
+
+ psurge_set_ipi(nr);
+ udelay(10);
+ psurge_clr_ipi(nr);
+
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+}
+
+/*
+ * With the dual-cpu powersurge board, the decrementers and timebases
+ * of both cpus are frozen after the secondary cpu is started up,
+ * until we give the secondary cpu another interrupt. This routine
+ * uses this to get the timebases synchronized.
+ * -- paulus.
+ */
+static void __init psurge_dual_sync_tb(int cpu_nr)
+{
+ int t;
+
+ set_dec(tb_ticks_per_jiffy);
+ set_tb(0, 0);
+ last_jiffy_stamp(cpu_nr) = 0;
+
+ if (cpu_nr > 0) {
+ mb();
+ sec_tb_reset = 1;
+ return;
+ }
+
+ /* wait for the secondary to have reset its TB before proceeding */
+ for (t = 10000000; t > 0 && !sec_tb_reset; --t)
+ ;
+
+ /* now interrupt the secondary, starting both TBs */
+ psurge_set_ipi(1);
+
+ smp_tb_synchronized = 1;
+}
+
+static struct irqaction psurge_irqaction = {
+ .handler = psurge_primary_intr,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "primary IPI",
+};
+
+static void __init smp_psurge_setup_cpu(int cpu_nr)
+{
+
+ if (cpu_nr == 0) {
+ /* If we failed to start the second CPU, we should still
+ * send it an IPI to start the timebase & DEC or we might
+ * have them stuck.
+ */
+ if (num_online_cpus() < 2) {
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
+ return;
+ }
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ if (setup_irq(30, &psurge_irqaction))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
+ }
+
+ if (psurge_type == PSURGE_DUAL)
+ psurge_dual_sync_tb(cpu_nr);
+}
+
+void __init smp_psurge_take_timebase(void)
+{
+ /* Dummy implementation */
+}
+
+void __init smp_psurge_give_timebase(void)
+{
+ /* Dummy implementation */
+}
+
+static int __init smp_core99_probe(void)
+{
+#ifdef CONFIG_6xx
+ extern int powersave_nap;
+#endif
+ struct device_node *cpus, *firstcpu;
+ int i, ncpus = 0, boot_cpu = -1;
+ u32 *tbprop = NULL;
+
+ if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+ cpus = firstcpu = find_type_devices("cpu");
+ while(cpus != NULL) {
+ u32 *regprop = (u32 *)get_property(cpus, "reg", NULL);
+ char *stateprop = (char *)get_property(cpus, "state", NULL);
+ if (regprop != NULL && stateprop != NULL &&
+ !strncmp(stateprop, "running", 7))
+ boot_cpu = *regprop;
+ ++ncpus;
+ cpus = cpus->next;
+ }
+ if (boot_cpu == -1)
+ printk(KERN_WARNING "Couldn't detect boot CPU !\n");
+ if (boot_cpu != 0)
+ printk(KERN_WARNING "Boot CPU is %d, unsupported setup !\n", boot_cpu);
+
+ if (machine_is_compatible("MacRISC4")) {
+ extern struct smp_ops_t core99_smp_ops;
+
+ core99_smp_ops.take_timebase = smp_generic_take_timebase;
+ core99_smp_ops.give_timebase = smp_generic_give_timebase;
+ } else {
+ if (firstcpu != NULL)
+ tbprop = (u32 *)get_property(firstcpu, "timebase-enable", NULL);
+ if (tbprop)
+ core99_tb_gpio = *tbprop;
+ else
+ core99_tb_gpio = KL_GPIO_TB_ENABLE;
+ }
+
+ if (ncpus > 1) {
+ mpic_request_ipis();
+ for (i = 1; i < ncpus; ++i)
+ smp_hw_index[i] = i;
+#ifdef CONFIG_6xx
+ powersave_nap = 0;
+#endif
+ core99_init_caches(0);
+ }
+
+ return ncpus;
+}
+
+static void __devinit smp_core99_kick_cpu(int nr)
+{
+ unsigned long save_vector, new_vector;
+ unsigned long flags;
+
+ volatile unsigned long *vector
+ = ((volatile unsigned long *)(KERNELBASE+0x100));
+ if (nr < 0 || nr > 3)
+ return;
+ if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+ local_irq_save(flags);
+ local_irq_disable();
+
+ /* Save reset vector */
+ save_vector = *vector;
+
+ /* Setup fake reset vector that does
+ * b __secondary_start_pmac_0 + nr*8 - KERNELBASE
+ */
+ new_vector = (unsigned long) __secondary_start_pmac_0 + nr * 8;
+ *vector = 0x48000002 + new_vector - KERNELBASE;
+
+ /* flush data cache and inval instruction cache */
+ flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+ /* Put some life in our friend */
+ pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+ /* FIXME: We wait a bit for the CPU to take the exception, I should
+ * instead wait for the entry code to set something for me. Well,
+ * ideally, all that crap will be done in prom.c and the CPU left
+ * in a RAM-based wait loop like CHRP.
+ */
+ mdelay(1);
+
+ /* Restore our exception vector */
+ *vector = save_vector;
+ flush_icache_range((unsigned long) vector, (unsigned long) vector + 4);
+
+ local_irq_restore(flags);
+ if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+}
+
+static void __devinit smp_core99_setup_cpu(int cpu_nr)
+{
+ /* Setup L2/L3 */
+ if (cpu_nr != 0)
+ core99_init_caches(cpu_nr);
+
+ /* Setup openpic */
+ mpic_setup_this_cpu();
+
+ if (cpu_nr == 0) {
+#ifdef CONFIG_POWER4
+ extern void g5_phy_disable_cpu1(void);
+
+ /* If we didn't start the second CPU, we must take
+ * it off the bus
+ */
+ if (machine_is_compatible("MacRISC4") &&
+ num_online_cpus() < 2)
+ g5_phy_disable_cpu1();
+#endif /* CONFIG_POWER4 */
+ if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+ }
+}
+
+/* not __init, called in sleep/wakeup code */
+void smp_core99_take_timebase(void)
+{
+ unsigned long flags;
+
+ /* tell the primary we're here */
+ sec_tb_reset = 1;
+ mb();
+
+ /* wait for the primary to set pri_tb_hi/lo */
+ while (sec_tb_reset < 2)
+ mb();
+
+ /* set our stuff the same as the primary */
+ local_irq_save(flags);
+ set_dec(1);
+ set_tb(pri_tb_hi, pri_tb_lo);
+ last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
+ mb();
+
+ /* tell the primary we're done */
+ sec_tb_reset = 0;
+ mb();
+ local_irq_restore(flags);
+}
+
+/* not __init, called in sleep/wakeup code */
+void smp_core99_give_timebase(void)
+{
+ unsigned long flags;
+ unsigned int t;
+
+ /* wait for the secondary to be in take_timebase */
+ for (t = 100000; t > 0 && !sec_tb_reset; --t)
+ udelay(10);
+ if (!sec_tb_reset) {
+ printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
+ return;
+ }
+
+ /* freeze the timebase and read it */
+ /* disable interrupts so the timebase is disabled for the
+ shortest possible time */
+ local_irq_save(flags);
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+ pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+ mb();
+ pri_tb_hi = get_tbu();
+ pri_tb_lo = get_tbl();
+ pri_tb_stamp = last_jiffy_stamp(smp_processor_id());
+ mb();
+
+ /* tell the secondary we're ready */
+ sec_tb_reset = 2;
+ mb();
+
+ /* wait for the secondary to have taken it */
+ for (t = 100000; t > 0 && sec_tb_reset; --t)
+ udelay(10);
+ if (sec_tb_reset)
+ printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
+ else
+ smp_tb_synchronized = 1;
+
+ /* Now, restart the timebase by leaving the GPIO to an open collector */
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
+ pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+ local_irq_restore(flags);
+}
+
+void smp_core99_message_pass(int target, int msg, unsigned long data, int wait)
+{
+ cpumask_t mask = CPU_MASK_ALL;
+ /* make sure we're sending something that translates to an IPI */
+ if (msg > 0x3) {
+ printk("SMP %d: smp_message_pass: unknown msg %d\n",
+ smp_processor_id(), msg);
+ return;
+ }
+ switch (target) {
+ case MSG_ALL:
+ mpic_send_ipi(msg, mask);
+ break;
+ case MSG_ALL_BUT_SELF:
+ cpu_clear(smp_processor_id(), mask);
+ mpic_send_ipi(msg, mask);
+ break;
+ default:
+ mpic_send_ipi(msg, cpumask_of_cpu(target));
+ break;
+ }
+}
+
+
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops = {
+ .message_pass = smp_psurge_message_pass,
+ .probe = smp_psurge_probe,
+ .kick_cpu = smp_psurge_kick_cpu,
+ .setup_cpu = smp_psurge_setup_cpu,
+ .give_timebase = smp_psurge_give_timebase,
+ .take_timebase = smp_psurge_take_timebase,
+};
+
+/* Core99 Macs (dual G4s) */
+struct smp_ops_t core99_smp_ops = {
+ .message_pass = smp_core99_message_pass,
+ .probe = smp_core99_probe,
+ .kick_cpu = smp_core99_kick_cpu,
+ .setup_cpu = smp_core99_setup_cpu,
+ .give_timebase = smp_core99_give_timebase,
+ .take_timebase = smp_core99_take_timebase,
+};
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+int __cpu_disable(void)
+{
+ cpu_clear(smp_processor_id(), cpu_online_map);
+
+ /* XXX reset cpu affinity here */
+ openpic_set_priority(0xf);
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ mb();
+ udelay(20);
+ asm volatile("mtdec %0" : : "r" (0x7fffffff));
+ return 0;
+}
+
+extern void low_cpu_die(void) __attribute__((noreturn)); /* in pmac_sleep.S */
+static int cpu_dead[NR_CPUS];
+
+void cpu_die(void)
+{
+ local_irq_disable();
+ cpu_dead[smp_processor_id()] = 1;
+ mb();
+ low_cpu_die();
+}
+
+void __cpu_die(unsigned int cpu)
+{
+ int timeout;
+
+ timeout = 1000;
+ while (!cpu_dead[cpu]) {
+ if (--timeout == 0) {
+ printk("CPU %u refused to die!\n", cpu);
+ break;
+ }
+ msleep(1);
+ }
+ cpu_callin_map[cpu] = 0;
+ cpu_dead[cpu] = 0;
+}
+
+#endif
diff --git a/arch/powerpc/platforms/powermac/pmac_time.c b/arch/powerpc/platforms/powermac/pmac_time.c
new file mode 100644
index 0000000..ff6adff
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/pmac_time.c
@@ -0,0 +1,291 @@
+/*
+ * Support for periodic interrupts (100 per second) and for getting
+ * the current time from the RTC on Power Macintoshes.
+ *
+ * We use the decrementer register for our periodic interrupts.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/hardirq.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/nvram.h>
+
+/* Apparently the RTC stores seconds since 1 Jan 1904 */
+#define RTC_OFFSET 2082844800
+
+/*
+ * Calibrate the decrementer frequency with the VIA timer 1.
+ */
+#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
+
+/* VIA registers */
+#define RS 0x200 /* skip between registers */
+#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
+#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
+#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
+#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
+#define ACR (11*RS) /* Auxiliary control register */
+#define IFR (13*RS) /* Interrupt flag register */
+
+/* Bits in ACR */
+#define T1MODE 0xc0 /* Timer 1 mode */
+#define T1MODE_CONT 0x40 /* continuous interrupts */
+
+/* Bits in IFR and IER */
+#define T1_INT 0x40 /* Timer 1 interrupt */
+
+extern struct timezone sys_tz;
+
+long __init
+pmac_time_init(void)
+{
+#ifdef CONFIG_NVRAM
+ s32 delta = 0;
+ int dst;
+
+ delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
+ delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
+ delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
+ if (delta & 0x00800000UL)
+ delta |= 0xFF000000UL;
+ dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
+ printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
+ dst ? "on" : "off");
+ return delta;
+#else
+ return 0;
+#endif
+}
+
+unsigned long
+pmac_get_rtc_time(void)
+{
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
+ struct adb_request req;
+ unsigned long now;
+#endif
+
+ /* Get the time from the RTC */
+ switch (sys_ctrler) {
+#ifdef CONFIG_ADB_CUDA
+ case SYS_CTRLER_CUDA:
+ if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
+ return 0;
+ while (!req.complete)
+ cuda_poll();
+ if (req.reply_len != 7)
+ printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ now = (req.reply[3] << 24) + (req.reply[4] << 16)
+ + (req.reply[5] << 8) + req.reply[6];
+ return now - RTC_OFFSET;
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_ADB_PMU
+ case SYS_CTRLER_PMU:
+ if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
+ return 0;
+ while (!req.complete)
+ pmu_poll();
+ if (req.reply_len != 4)
+ printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ now = (req.reply[0] << 24) + (req.reply[1] << 16)
+ + (req.reply[2] << 8) + req.reply[3];
+ return now - RTC_OFFSET;
+#endif /* CONFIG_ADB_PMU */
+ default: ;
+ }
+ return 0;
+}
+
+int
+pmac_set_rtc_time(unsigned long nowtime)
+{
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
+ struct adb_request req;
+#endif
+
+ nowtime += RTC_OFFSET;
+
+ switch (sys_ctrler) {
+#ifdef CONFIG_ADB_CUDA
+ case SYS_CTRLER_CUDA:
+ if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
+ nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
+ return 0;
+ while (!req.complete)
+ cuda_poll();
+ if ((req.reply_len != 3) && (req.reply_len != 7))
+ printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ return 1;
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_ADB_PMU
+ case SYS_CTRLER_PMU:
+ if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
+ nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
+ return 0;
+ while (!req.complete)
+ pmu_poll();
+ if (req.reply_len != 0)
+ printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ return 1;
+#endif /* CONFIG_ADB_PMU */
+ default:
+ return 0;
+ }
+}
+
+/*
+ * Calibrate the decrementer register using VIA timer 1.
+ * This is used both on powermacs and CHRP machines.
+ */
+int __init
+via_calibrate_decr(void)
+{
+ struct device_node *vias;
+ volatile unsigned char __iomem *via;
+ int count = VIA_TIMER_FREQ_6 / 100;
+ unsigned int dstart, dend;
+
+ vias = find_devices("via-cuda");
+ if (vias == 0)
+ vias = find_devices("via-pmu");
+ if (vias == 0)
+ vias = find_devices("via");
+ if (vias == 0 || vias->n_addrs == 0)
+ return 0;
+ via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
+
+ /* set timer 1 for continuous interrupts */
+ out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
+ /* set the counter to a small value */
+ out_8(&via[T1CH], 2);
+ /* set the latch to `count' */
+ out_8(&via[T1LL], count);
+ out_8(&via[T1LH], count >> 8);
+ /* wait until it hits 0 */
+ while ((in_8(&via[IFR]) & T1_INT) == 0)
+ ;
+ dstart = get_dec();
+ /* clear the interrupt & wait until it hits 0 again */
+ in_8(&via[T1CL]);
+ while ((in_8(&via[IFR]) & T1_INT) == 0)
+ ;
+ dend = get_dec();
+
+ tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100));
+ tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
+
+ printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
+ tb_ticks_per_jiffy, dstart - dend);
+
+ iounmap(via);
+
+ return 1;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Reset the time after a sleep.
+ */
+static int
+time_sleep_notify(struct pmu_sleep_notifier *self, int when)
+{
+ static unsigned long time_diff;
+ unsigned long flags;
+ unsigned long seq;
+
+ switch (when) {
+ case PBOOK_SLEEP_NOW:
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ time_diff = xtime.tv_sec - pmac_get_rtc_time();
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+ break;
+ case PBOOK_WAKE:
+ write_seqlock_irqsave(&xtime_lock, flags);
+ xtime.tv_sec = pmac_get_rtc_time() + time_diff;
+ xtime.tv_nsec = 0;
+ last_rtc_update = xtime.tv_sec;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ break;
+ }
+ return PBOOK_SLEEP_OK;
+}
+
+static struct pmu_sleep_notifier time_sleep_notifier = {
+ time_sleep_notify, SLEEP_LEVEL_MISC,
+};
+#endif /* CONFIG_PM */
+
+/*
+ * Query the OF and get the decr frequency.
+ * This was taken from the pmac time_init() when merging the prep/pmac
+ * time functions.
+ */
+void __init
+pmac_calibrate_decr(void)
+{
+ struct device_node *cpu;
+ unsigned int freq, *fp;
+
+#ifdef CONFIG_PM
+ pmu_register_sleep_notifier(&time_sleep_notifier);
+#endif /* CONFIG_PM */
+
+ /* We assume MacRISC2 machines have correct device-tree
+ * calibration. That's better since the VIA itself seems
+ * to be slightly off. --BenH
+ */
+ if (!machine_is_compatible("MacRISC2") &&
+ !machine_is_compatible("MacRISC3") &&
+ !machine_is_compatible("MacRISC4"))
+ if (via_calibrate_decr())
+ return;
+
+ /* Special case: QuickSilver G4s seem to have a badly calibrated
+ * timebase-frequency in OF, VIA is much better on these. We should
+ * probably implement calibration based on the KL timer on these
+ * machines anyway... -BenH
+ */
+ if (machine_is_compatible("PowerMac3,5"))
+ if (via_calibrate_decr())
+ return;
+ /*
+ * The cpu node should have a timebase-frequency property
+ * to tell us the rate at which the decrementer counts.
+ */
+ cpu = find_type_devices("cpu");
+ if (cpu == 0)
+ panic("can't find cpu node in time_init");
+ fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
+ if (fp == 0)
+ panic("can't get cpu timebase frequency");
+ freq = *fp;
+ printk("time_init: decrementer frequency = %u.%.6u MHz\n",
+ freq/1000000, freq%1000000);
+ tb_ticks_per_jiffy = freq / HZ;
+ tb_to_us = mulhwu_scale_factor(freq, 1000000);
+}
diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig
new file mode 100644
index 0000000..673ac47
--- /dev/null
+++ b/arch/powerpc/platforms/prep/Kconfig
@@ -0,0 +1,22 @@
+
+config PREP_RESIDUAL
+ bool "Support for PReP Residual Data"
+ depends on PPC_PREP
+ help
+ Some PReP systems have residual data passed to the kernel by the
+ firmware. This allows detection of memory size, devices present and
+ other useful pieces of information. Sometimes this information is
+ not present or incorrect, in which case it could lead to the machine
+ behaving incorrectly. If this happens, either disable PREP_RESIDUAL
+ or pass the 'noresidual' option to the kernel.
+
+ If you are running a PReP system, say Y here, otherwise say N.
+
+config PROC_PREPRESIDUAL
+ bool "Support for reading of PReP Residual Data in /proc"
+ depends on PREP_RESIDUAL && PROC_FS
+ help
+ Enabling this option will create a /proc/residual file which allows
+ you to get at the residual data on PReP systems. You will need a tool
+ (lsresidual) to parse it. If you aren't on a PReP system, you don't
+ want this.
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
new file mode 100644
index 0000000..7a3b6fc
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -0,0 +1,47 @@
+
+config PPC_SPLPAR
+ depends on PPC_PSERIES
+ bool "Support for shared-processor logical partitions"
+ default n
+ help
+ Enabling this option will make the kernel run more efficiently
+ on logically-partitioned pSeries systems which use shared
+ processors, that is, which share physical processors between
+ two or more partitions.
+
+config HMT
+ bool "Hardware multithreading"
+ depends on SMP && PPC_PSERIES && BROKEN
+ help
+ This option enables hardware multithreading on RS64 cpus.
+ pSeries systems p620 and p660 have such a cpu type.
+
+config EEH
+ bool "PCI Extended Error Handling (EEH)" if EMBEDDED
+ depends on PPC_PSERIES
+ default y if !EMBEDDED
+
+config PPC_RTAS
+ bool
+ depends on PPC_PSERIES || PPC_BPA
+ default y
+
+config RTAS_PROC
+ bool "Proc interface to RTAS"
+ depends on PPC_RTAS
+ default y
+
+config RTAS_FLASH
+ tristate "Firmware flash interface"
+ depends on PPC64 && RTAS_PROC
+
+config SCANLOG
+ tristate "Scanlog dump interface"
+ depends on RTAS_PROC && PPC_PSERIES
+
+config LPARCFG
+ tristate "LPAR Configuration Data"
+ depends on PPC_PSERIES || PPC_ISERIES
+ help
+ Provide system capacity information via human readable
+ <key word>=<value> pairs through a /proc/ppc64/lparcfg interface.
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
new file mode 100644
index 0000000..26bdcd9
--- /dev/null
+++ b/arch/powerpc/sysdev/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MPIC) += mpic.o
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
new file mode 100644
index 0000000..c660e7d
--- /dev/null
+++ b/arch/powerpc/sysdev/mpic.c
@@ -0,0 +1,904 @@
+/*
+ * arch/powerpc/kernel/mpic.c
+ *
+ * Driver for interrupt controllers following the OpenPIC standard, the
+ * common implementation beeing IBM's MPIC. This driver also can deal
+ * with various broken implementations of this HW.
+ *
+ * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/bootmem.h>
+#include <linux/spinlock.h>
+#include <linux/pci.h>
+
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/mpic.h>
+#include <asm/smp.h>
+
+#ifdef DEBUG
+#define DBG(fmt...) printk(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static struct mpic *mpics;
+static struct mpic *mpic_primary;
+static DEFINE_SPINLOCK(mpic_lock);
+
+
+/*
+ * Register accessor functions
+ */
+
+
+static inline u32 _mpic_read(unsigned int be, volatile u32 __iomem *base,
+ unsigned int reg)
+{
+ if (be)
+ return in_be32(base + (reg >> 2));
+ else
+ return in_le32(base + (reg >> 2));
+}
+
+static inline void _mpic_write(unsigned int be, volatile u32 __iomem *base,
+ unsigned int reg, u32 value)
+{
+ if (be)
+ out_be32(base + (reg >> 2), value);
+ else
+ out_le32(base + (reg >> 2), value);
+}
+
+static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi)
+{
+ unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0;
+ unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10);
+
+ if (mpic->flags & MPIC_BROKEN_IPI)
+ be = !be;
+ return _mpic_read(be, mpic->gregs, offset);
+}
+
+static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value)
+{
+ unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10);
+
+ _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value);
+}
+
+static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg)
+{
+ unsigned int cpu = 0;
+
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+
+ return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg);
+}
+
+static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value)
+{
+ unsigned int cpu = 0;
+
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+
+ _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg, value);
+}
+
+static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigned int reg)
+{
+ unsigned int isu = src_no >> mpic->isu_shift;
+ unsigned int idx = src_no & mpic->isu_mask;
+
+ return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu],
+ reg + (idx * MPIC_IRQ_STRIDE));
+}
+
+static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
+ unsigned int reg, u32 value)
+{
+ unsigned int isu = src_no >> mpic->isu_shift;
+ unsigned int idx = src_no & mpic->isu_mask;
+
+ _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu],
+ reg + (idx * MPIC_IRQ_STRIDE), value);
+}
+
+#define mpic_read(b,r) _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r))
+#define mpic_write(b,r,v) _mpic_write(mpic->flags & MPIC_BIG_ENDIAN,(b),(r),(v))
+#define mpic_ipi_read(i) _mpic_ipi_read(mpic,(i))
+#define mpic_ipi_write(i,v) _mpic_ipi_write(mpic,(i),(v))
+#define mpic_cpu_read(i) _mpic_cpu_read(mpic,(i))
+#define mpic_cpu_write(i,v) _mpic_cpu_write(mpic,(i),(v))
+#define mpic_irq_read(s,r) _mpic_irq_read(mpic,(s),(r))
+#define mpic_irq_write(s,r,v) _mpic_irq_write(mpic,(s),(r),(v))
+
+
+/*
+ * Low level utility functions
+ */
+
+
+
+/* Check if we have one of those nice broken MPICs with a flipped endian on
+ * reads from IPI registers
+ */
+static void __init mpic_test_broken_ipi(struct mpic *mpic)
+{
+ u32 r;
+
+ mpic_write(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0, MPIC_VECPRI_MASK);
+ r = mpic_read(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0);
+
+ if (r == le32_to_cpu(MPIC_VECPRI_MASK)) {
+ printk(KERN_INFO "mpic: Detected reversed IPI registers\n");
+ mpic->flags |= MPIC_BROKEN_IPI;
+ }
+}
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+
+/* Test if an interrupt is sourced from HyperTransport (used on broken U3s)
+ * to force the edge setting on the MPIC and do the ack workaround.
+ */
+static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source_no)
+{
+ if (source_no >= 128 || !mpic->fixups)
+ return 0;
+ return mpic->fixups[source_no].base != NULL;
+}
+
+static inline void mpic_apic_end_irq(struct mpic *mpic, unsigned int source_no)
+{
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source_no];
+ u32 tmp;
+
+ spin_lock(&mpic->fixup_lock);
+ writeb(0x11 + 2 * fixup->irq, fixup->base);
+ tmp = readl(fixup->base + 2);
+ writel(tmp | 0x80000000ul, fixup->base + 2);
+ /* config writes shouldn't be posted but let's be safe ... */
+ (void)readl(fixup->base + 2);
+ spin_unlock(&mpic->fixup_lock);
+}
+
+
+static void __init mpic_amd8111_read_irq(struct mpic *mpic, u8 __iomem *devbase)
+{
+ int i, irq;
+ u32 tmp;
+
+ printk(KERN_INFO "mpic: - Workarounds on AMD 8111 @ %p\n", devbase);
+
+ for (i=0; i < 24; i++) {
+ writeb(0x10 + 2*i, devbase + 0xf2);
+ tmp = readl(devbase + 0xf4);
+ if ((tmp & 0x1) || !(tmp & 0x20))
+ continue;
+ irq = (tmp >> 16) & 0xff;
+ mpic->fixups[irq].irq = i;
+ mpic->fixups[irq].base = devbase + 0xf2;
+ }
+}
+
+static void __init mpic_amd8131_read_irq(struct mpic *mpic, u8 __iomem *devbase)
+{
+ int i, irq;
+ u32 tmp;
+
+ printk(KERN_INFO "mpic: - Workarounds on AMD 8131 @ %p\n", devbase);
+
+ for (i=0; i < 4; i++) {
+ writeb(0x10 + 2*i, devbase + 0xba);
+ tmp = readl(devbase + 0xbc);
+ if ((tmp & 0x1) || !(tmp & 0x20))
+ continue;
+ irq = (tmp >> 16) & 0xff;
+ mpic->fixups[irq].irq = i;
+ mpic->fixups[irq].base = devbase + 0xba;
+ }
+}
+
+static void __init mpic_scan_ioapics(struct mpic *mpic)
+{
+ unsigned int devfn;
+ u8 __iomem *cfgspace;
+
+ printk(KERN_INFO "mpic: Setting up IO-APICs workarounds for U3\n");
+
+ /* Allocate fixups array */
+ mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
+ BUG_ON(mpic->fixups == NULL);
+ memset(mpic->fixups, 0, 128 * sizeof(struct mpic_irq_fixup));
+
+ /* Init spinlock */
+ spin_lock_init(&mpic->fixup_lock);
+
+ /* Map u3 config space. We assume all IO-APICs are on the primary bus
+ * and slot will never be above "0xf" so we only need to map 32k
+ */
+ cfgspace = (unsigned char __iomem *)ioremap(0xf2000000, 0x8000);
+ BUG_ON(cfgspace == NULL);
+
+ /* Now we scan all slots. We do a very quick scan, we read the header type,
+ * vendor ID and device ID only, that's plenty enough
+ */
+ for (devfn = 0; devfn < PCI_DEVFN(0x10,0); devfn ++) {
+ u8 __iomem *devbase = cfgspace + (devfn << 8);
+ u8 hdr_type = readb(devbase + PCI_HEADER_TYPE);
+ u32 l = readl(devbase + PCI_VENDOR_ID);
+ u16 vendor_id, device_id;
+ int multifunc = 0;
+
+ DBG("devfn %x, l: %x\n", devfn, l);
+
+ /* If no device, skip */
+ if (l == 0xffffffff || l == 0x00000000 ||
+ l == 0x0000ffff || l == 0xffff0000)
+ goto next;
+
+ /* Check if it's a multifunction device (only really used
+ * to function 0 though
+ */
+ multifunc = !!(hdr_type & 0x80);
+ vendor_id = l & 0xffff;
+ device_id = (l >> 16) & 0xffff;
+
+ /* If a known device, go to fixup setup code */
+ if (vendor_id == PCI_VENDOR_ID_AMD && device_id == 0x7460)
+ mpic_amd8111_read_irq(mpic, devbase);
+ if (vendor_id == PCI_VENDOR_ID_AMD && device_id == 0x7450)
+ mpic_amd8131_read_irq(mpic, devbase);
+ next:
+ /* next device, if function 0 */
+ if ((PCI_FUNC(devfn) == 0) && !multifunc)
+ devfn += 7;
+ }
+}
+
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+
+/* Find an mpic associated with a given linux interrupt */
+static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi)
+{
+ struct mpic *mpic = mpics;
+
+ while(mpic) {
+ /* search IPIs first since they may override the main interrupts */
+ if (irq >= mpic->ipi_offset && irq < (mpic->ipi_offset + 4)) {
+ if (is_ipi)
+ *is_ipi = 1;
+ return mpic;
+ }
+ if (irq >= mpic->irq_offset &&
+ irq < (mpic->irq_offset + mpic->irq_count)) {
+ if (is_ipi)
+ *is_ipi = 0;
+ return mpic;
+ }
+ mpic = mpic -> next;
+ }
+ return NULL;
+}
+
+/* Convert a cpu mask from logical to physical cpu numbers. */
+static inline u32 mpic_physmask(u32 cpumask)
+{
+ int i;
+ u32 mask = 0;
+
+ for (i = 0; i < NR_CPUS; ++i, cpumask >>= 1)
+ mask |= (cpumask & 1) << get_hard_smp_processor_id(i);
+ return mask;
+}
+
+#ifdef CONFIG_SMP
+/* Get the mpic structure from the IPI number */
+static inline struct mpic * mpic_from_ipi(unsigned int ipi)
+{
+ return container_of(irq_desc[ipi].handler, struct mpic, hc_ipi);
+}
+#endif
+
+/* Get the mpic structure from the irq number */
+static inline struct mpic * mpic_from_irq(unsigned int irq)
+{
+ return container_of(irq_desc[irq].handler, struct mpic, hc_irq);
+}
+
+/* Send an EOI */
+static inline void mpic_eoi(struct mpic *mpic)
+{
+ mpic_cpu_write(MPIC_CPU_EOI, 0);
+ (void)mpic_cpu_read(MPIC_CPU_WHOAMI);
+}
+
+#ifdef CONFIG_SMP
+static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct mpic *mpic = dev_id;
+
+ smp_message_recv(irq - mpic->ipi_offset, regs);
+ return IRQ_HANDLED;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * Linux descriptor level callbacks
+ */
+
+
+static void mpic_enable_irq(unsigned int irq)
+{
+ unsigned int loops = 100000;
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = irq - mpic->irq_offset;
+
+ DBG("%s: enable_irq: %d (src %d)\n", mpic->name, irq, src);
+
+ mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
+ mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & ~MPIC_VECPRI_MASK);
+
+ /* make sure mask gets to controller before we return to user */
+ do {
+ if (!loops--) {
+ printk(KERN_ERR "mpic_enable_irq timeout\n");
+ break;
+ }
+ } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
+}
+
+static void mpic_disable_irq(unsigned int irq)
+{
+ unsigned int loops = 100000;
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = irq - mpic->irq_offset;
+
+ DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src);
+
+ mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI,
+ mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | MPIC_VECPRI_MASK);
+
+ /* make sure mask gets to controller before we return to user */
+ do {
+ if (!loops--) {
+ printk(KERN_ERR "mpic_enable_irq timeout\n");
+ break;
+ }
+ } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
+}
+
+static void mpic_end_irq(unsigned int irq)
+{
+ struct mpic *mpic = mpic_from_irq(irq);
+
+ DBG("%s: end_irq: %d\n", mpic->name, irq);
+
+ /* We always EOI on end_irq() even for edge interrupts since that
+ * should only lower the priority, the MPIC should have properly
+ * latched another edge interrupt coming in anyway
+ */
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ if (mpic->flags & MPIC_BROKEN_U3) {
+ unsigned int src = irq - mpic->irq_offset;
+ if (mpic_is_ht_interrupt(mpic, src))
+ mpic_apic_end_irq(mpic, src);
+ }
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ mpic_eoi(mpic);
+}
+
+#ifdef CONFIG_SMP
+
+static void mpic_enable_ipi(unsigned int irq)
+{
+ struct mpic *mpic = mpic_from_ipi(irq);
+ unsigned int src = irq - mpic->ipi_offset;
+
+ DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src);
+ mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK);
+}
+
+static void mpic_disable_ipi(unsigned int irq)
+{
+ /* NEVER disable an IPI... that's just plain wrong! */
+}
+
+static void mpic_end_ipi(unsigned int irq)
+{
+ struct mpic *mpic = mpic_from_ipi(irq);
+
+ /*
+ * IPIs are marked IRQ_PER_CPU. This has the side effect of
+ * preventing the IRQ_PENDING/IRQ_INPROGRESS logic from
+ * applying to them. We EOI them late to avoid re-entering.
+ * We mark IPI's with SA_INTERRUPT as they must run with
+ * irqs disabled.
+ */
+ mpic_eoi(mpic);
+}
+
+#endif /* CONFIG_SMP */
+
+static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask)
+{
+ struct mpic *mpic = mpic_from_irq(irq);
+
+ cpumask_t tmp;
+
+ cpus_and(tmp, cpumask, cpu_online_map);
+
+ mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION,
+ mpic_physmask(cpus_addr(tmp)[0]));
+}
+
+
+/*
+ * Exported functions
+ */
+
+
+struct mpic * __init mpic_alloc(unsigned long phys_addr,
+ unsigned int flags,
+ unsigned int isu_size,
+ unsigned int irq_offset,
+ unsigned int irq_count,
+ unsigned int ipi_offset,
+ unsigned char *senses,
+ unsigned int senses_count,
+ const char *name)
+{
+ struct mpic *mpic;
+ u32 reg;
+ const char *vers;
+ int i;
+
+ mpic = alloc_bootmem(sizeof(struct mpic));
+ if (mpic == NULL)
+ return NULL;
+
+
+ memset(mpic, 0, sizeof(struct mpic));
+ mpic->name = name;
+
+ mpic->hc_irq.typename = name;
+ mpic->hc_irq.enable = mpic_enable_irq;
+ mpic->hc_irq.disable = mpic_disable_irq;
+ mpic->hc_irq.end = mpic_end_irq;
+ if (flags & MPIC_PRIMARY)
+ mpic->hc_irq.set_affinity = mpic_set_affinity;
+#ifdef CONFIG_SMP
+ mpic->hc_ipi.typename = name;
+ mpic->hc_ipi.enable = mpic_enable_ipi;
+ mpic->hc_ipi.disable = mpic_disable_ipi;
+ mpic->hc_ipi.end = mpic_end_ipi;
+#endif /* CONFIG_SMP */
+
+ mpic->flags = flags;
+ mpic->isu_size = isu_size;
+ mpic->irq_offset = irq_offset;
+ mpic->irq_count = irq_count;
+ mpic->ipi_offset = ipi_offset;
+ mpic->num_sources = 0; /* so far */
+ mpic->senses = senses;
+ mpic->senses_count = senses_count;
+
+ /* Map the global registers */
+ mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
+ mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2);
+ BUG_ON(mpic->gregs == NULL);
+
+ /* Reset */
+ if (flags & MPIC_WANTS_RESET) {
+ mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0,
+ mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+ | MPIC_GREG_GCONF_RESET);
+ while( mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+ & MPIC_GREG_GCONF_RESET)
+ mb();
+ }
+
+ /* Read feature register, calculate num CPUs and, for non-ISU
+ * MPICs, num sources as well. On ISU MPICs, sources are counted
+ * as ISUs are added
+ */
+ reg = mpic_read(mpic->gregs, MPIC_GREG_FEATURE_0);
+ mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+ >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
+ if (isu_size == 0)
+ mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+ >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+
+ /* Map the per-CPU registers */
+ for (i = 0; i < mpic->num_cpus; i++) {
+ mpic->cpuregs[i] = ioremap(phys_addr + MPIC_CPU_BASE +
+ i * MPIC_CPU_STRIDE, 0x1000);
+ BUG_ON(mpic->cpuregs[i] == NULL);
+ }
+
+ /* Initialize main ISU if none provided */
+ if (mpic->isu_size == 0) {
+ mpic->isu_size = mpic->num_sources;
+ mpic->isus[0] = ioremap(phys_addr + MPIC_IRQ_BASE,
+ MPIC_IRQ_STRIDE * mpic->isu_size);
+ BUG_ON(mpic->isus[0] == NULL);
+ }
+ mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
+ mpic->isu_mask = (1 << mpic->isu_shift) - 1;
+
+ /* Display version */
+ switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
+ case 1:
+ vers = "1.0";
+ break;
+ case 2:
+ vers = "1.2";
+ break;
+ case 3:
+ vers = "1.3";
+ break;
+ default:
+ vers = "<unknown>";
+ break;
+ }
+ printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %lx, max %d CPUs\n",
+ name, vers, phys_addr, mpic->num_cpus);
+ printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n", mpic->isu_size,
+ mpic->isu_shift, mpic->isu_mask);
+
+ mpic->next = mpics;
+ mpics = mpic;
+
+ if (flags & MPIC_PRIMARY)
+ mpic_primary = mpic;
+
+ return mpic;
+}
+
+void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
+ unsigned long phys_addr)
+{
+ unsigned int isu_first = isu_num * mpic->isu_size;
+
+ BUG_ON(isu_num >= MPIC_MAX_ISU);
+
+ mpic->isus[isu_num] = ioremap(phys_addr, MPIC_IRQ_STRIDE * mpic->isu_size);
+ if ((isu_first + mpic->isu_size) > mpic->num_sources)
+ mpic->num_sources = isu_first + mpic->isu_size;
+}
+
+void __init mpic_setup_cascade(unsigned int irq, mpic_cascade_t handler,
+ void *data)
+{
+ struct mpic *mpic = mpic_find(irq, NULL);
+ unsigned long flags;
+
+ /* Synchronization here is a bit dodgy, so don't try to replace cascade
+ * interrupts on the fly too often ... but normally it's set up at boot.
+ */
+ spin_lock_irqsave(&mpic_lock, flags);
+ if (mpic->cascade)
+ mpic_disable_irq(mpic->cascade_vec + mpic->irq_offset);
+ mpic->cascade = NULL;
+ wmb();
+ mpic->cascade_vec = irq - mpic->irq_offset;
+ mpic->cascade_data = data;
+ wmb();
+ mpic->cascade = handler;
+ mpic_enable_irq(irq);
+ spin_unlock_irqrestore(&mpic_lock, flags);
+}
+
+void __init mpic_init(struct mpic *mpic)
+{
+ int i;
+
+ BUG_ON(mpic->num_sources == 0);
+
+ printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
+
+ /* Set current processor priority to max */
+ mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+
+ /* Initialize timers: just disable them all */
+ for (i = 0; i < 4; i++) {
+ mpic_write(mpic->tmregs,
+ i * MPIC_TIMER_STRIDE + MPIC_TIMER_DESTINATION, 0);
+ mpic_write(mpic->tmregs,
+ i * MPIC_TIMER_STRIDE + MPIC_TIMER_VECTOR_PRI,
+ MPIC_VECPRI_MASK |
+ (MPIC_VEC_TIMER_0 + i));
+ }
+
+ /* Initialize IPIs to our reserved vectors and mark them disabled for now */
+ mpic_test_broken_ipi(mpic);
+ for (i = 0; i < 4; i++) {
+ mpic_ipi_write(i,
+ MPIC_VECPRI_MASK |
+ (10 << MPIC_VECPRI_PRIORITY_SHIFT) |
+ (MPIC_VEC_IPI_0 + i));
+#ifdef CONFIG_SMP
+ if (!(mpic->flags & MPIC_PRIMARY))
+ continue;
+ irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU;
+ irq_desc[mpic->ipi_offset+i].handler = &mpic->hc_ipi;
+
+#endif /* CONFIG_SMP */
+ }
+
+ /* Initialize interrupt sources */
+ if (mpic->irq_count == 0)
+ mpic->irq_count = mpic->num_sources;
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ /* Do the ioapic fixups on U3 broken mpic */
+ DBG("MPIC flags: %x\n", mpic->flags);
+ if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
+ mpic_scan_ioapics(mpic);
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ for (i = 0; i < mpic->num_sources; i++) {
+ /* start with vector = source number, and masked */
+ u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT);
+ int level = 0;
+
+ /* if it's an IPI, we skip it */
+ if ((mpic->irq_offset + i) >= (mpic->ipi_offset + i) &&
+ (mpic->irq_offset + i) < (mpic->ipi_offset + i + 4))
+ continue;
+
+ /* do senses munging */
+ if (mpic->senses && i < mpic->senses_count) {
+ if (mpic->senses[i] & IRQ_SENSE_LEVEL)
+ vecpri |= MPIC_VECPRI_SENSE_LEVEL;
+ if (mpic->senses[i] & IRQ_POLARITY_POSITIVE)
+ vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+ } else
+ vecpri |= MPIC_VECPRI_SENSE_LEVEL;
+
+ /* remember if it was a level interrupts */
+ level = (vecpri & MPIC_VECPRI_SENSE_LEVEL);
+
+ /* deal with broken U3 */
+ if (mpic->flags & MPIC_BROKEN_U3) {
+#ifdef CONFIG_MPIC_BROKEN_U3
+ if (mpic_is_ht_interrupt(mpic, i)) {
+ vecpri &= ~(MPIC_VECPRI_SENSE_MASK |
+ MPIC_VECPRI_POLARITY_MASK);
+ vecpri |= MPIC_VECPRI_POLARITY_POSITIVE;
+ }
+#else
+ printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n");
+#endif
+ }
+
+ DBG("setup source %d, vecpri: %08x, level: %d\n", i, vecpri,
+ (level != 0));
+
+ /* init hw */
+ mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri);
+ mpic_irq_write(i, MPIC_IRQ_DESTINATION,
+ 1 << hard_smp_processor_id());
+
+ /* init linux descriptors */
+ if (i < mpic->irq_count) {
+ irq_desc[mpic->irq_offset+i].status = level ? IRQ_LEVEL : 0;
+ irq_desc[mpic->irq_offset+i].handler = &mpic->hc_irq;
+ }
+ }
+
+ /* Init spurrious vector */
+ mpic_write(mpic->gregs, MPIC_GREG_SPURIOUS, MPIC_VEC_SPURRIOUS);
+
+ /* Disable 8259 passthrough */
+ mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0,
+ mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0)
+ | MPIC_GREG_GCONF_8259_PTHROU_DIS);
+
+ /* Set current processor priority to 0 */
+ mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0);
+}
+
+
+
+void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
+{
+ int is_ipi;
+ struct mpic *mpic = mpic_find(irq, &is_ipi);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&mpic_lock, flags);
+ if (is_ipi) {
+ reg = mpic_ipi_read(irq - mpic->ipi_offset) & MPIC_VECPRI_PRIORITY_MASK;
+ mpic_ipi_write(irq - mpic->ipi_offset,
+ reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
+ } else {
+ reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI)
+ & MPIC_VECPRI_PRIORITY_MASK;
+ mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI,
+ reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
+ }
+ spin_unlock_irqrestore(&mpic_lock, flags);
+}
+
+unsigned int mpic_irq_get_priority(unsigned int irq)
+{
+ int is_ipi;
+ struct mpic *mpic = mpic_find(irq, &is_ipi);
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&mpic_lock, flags);
+ if (is_ipi)
+ reg = mpic_ipi_read(irq - mpic->ipi_offset);
+ else
+ reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI);
+ spin_unlock_irqrestore(&mpic_lock, flags);
+ return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
+}
+
+void mpic_setup_this_cpu(void)
+{
+#ifdef CONFIG_SMP
+ struct mpic *mpic = mpic_primary;
+ unsigned long flags;
+ u32 msk = 1 << hard_smp_processor_id();
+ unsigned int i;
+
+ BUG_ON(mpic == NULL);
+
+ DBG("%s: setup_this_cpu(%d)\n", mpic->name, hard_smp_processor_id());
+
+ spin_lock_irqsave(&mpic_lock, flags);
+
+ /* let the mpic know we want intrs. default affinity is 0xffffffff
+ * until changed via /proc. That's how it's done on x86. If we want
+ * it differently, then we should make sure we also change the default
+ * values of irq_affinity in irq.c.
+ */
+ if (distribute_irqs) {
+ for (i = 0; i < mpic->num_sources ; i++)
+ mpic_irq_write(i, MPIC_IRQ_DESTINATION,
+ mpic_irq_read(i, MPIC_IRQ_DESTINATION) | msk);
+ }
+
+ /* Set current processor priority to 0 */
+ mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0);
+
+ spin_unlock_irqrestore(&mpic_lock, flags);
+#endif /* CONFIG_SMP */
+}
+
+int mpic_cpu_get_priority(void)
+{
+ struct mpic *mpic = mpic_primary;
+
+ return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI);
+}
+
+void mpic_cpu_set_priority(int prio)
+{
+ struct mpic *mpic = mpic_primary;
+
+ prio &= MPIC_CPU_TASKPRI_MASK;
+ mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio);
+}
+
+/*
+ * XXX: someone who knows mpic should check this.
+ * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
+ * or can we reset the mpic in the new kernel?
+ */
+void mpic_teardown_this_cpu(int secondary)
+{
+ struct mpic *mpic = mpic_primary;
+ unsigned long flags;
+ u32 msk = 1 << hard_smp_processor_id();
+ unsigned int i;
+
+ BUG_ON(mpic == NULL);
+
+ DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id());
+ spin_lock_irqsave(&mpic_lock, flags);
+
+ /* let the mpic know we don't want intrs. */
+ for (i = 0; i < mpic->num_sources ; i++)
+ mpic_irq_write(i, MPIC_IRQ_DESTINATION,
+ mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk);
+
+ /* Set current processor priority to max */
+ mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf);
+
+ spin_unlock_irqrestore(&mpic_lock, flags);
+}
+
+
+void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
+{
+ struct mpic *mpic = mpic_primary;
+
+ BUG_ON(mpic == NULL);
+
+ DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
+
+ mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10,
+ mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
+}
+
+int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
+{
+ u32 irq;
+
+ irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+ DBG("%s: get_one_irq(): %d\n", mpic->name, irq);
+
+ if (mpic->cascade && irq == mpic->cascade_vec) {
+ DBG("%s: cascading ...\n", mpic->name);
+ irq = mpic->cascade(regs, mpic->cascade_data);
+ mpic_eoi(mpic);
+ return irq;
+ }
+ if (unlikely(irq == MPIC_VEC_SPURRIOUS))
+ return -1;
+ if (irq < MPIC_VEC_IPI_0)
+ return irq + mpic->irq_offset;
+ DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0);
+ return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset;
+}
+
+int mpic_get_irq(struct pt_regs *regs)
+{
+ struct mpic *mpic = mpic_primary;
+
+ BUG_ON(mpic == NULL);
+
+ return mpic_get_one_irq(mpic, regs);
+}
+
+
+#ifdef CONFIG_SMP
+void mpic_request_ipis(void)
+{
+ struct mpic *mpic = mpic_primary;
+
+ BUG_ON(mpic == NULL);
+
+ printk("requesting IPIs ... \n");
+
+ /* IPIs are marked SA_INTERRUPT as they must run with irqs disabled */
+ request_irq(mpic->ipi_offset+0, mpic_ipi_action, SA_INTERRUPT,
+ "IPI0 (call function)", mpic);
+ request_irq(mpic->ipi_offset+1, mpic_ipi_action, SA_INTERRUPT,
+ "IPI1 (reschedule)", mpic);
+ request_irq(mpic->ipi_offset+2, mpic_ipi_action, SA_INTERRUPT,
+ "IPI2 (unused)", mpic);
+ request_irq(mpic->ipi_offset+3, mpic_ipi_action, SA_INTERRUPT,
+ "IPI3 (debugger break)", mpic);
+
+ printk("IPIs requested... \n");
+}
+#endif /* CONFIG_SMP */
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index ce166e3..0649540 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -1,6 +1,7 @@
#
# Makefile for the linux kernel.
#
+ifneq ($(CONFIG_PPC_MERGE),y)
extra-$(CONFIG_PPC_STD_MMU) := head.o
extra-$(CONFIG_40x) := head_4xx.o
@@ -37,3 +38,23 @@
# These are here while we do the architecture merge
vecemu-y += ../../powerpc/kernel/vecemu.o
+
+else
+obj-y := entry.o irq.o idle.o time.o misc.o \
+ signal.o ptrace.o align.o \
+ syscalls.o setup.o \
+ cputable.o perfmon.o
+obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o
+obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o
+obj-$(CONFIG_POWER4) += cpu_setup_power4.o
+obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += ppc-stub.o
+obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
+obj-$(CONFIG_TAU) += temp.o
+ifndef CONFIG_E200
+obj-$(CONFIG_FSL_BOOKE) += perfmon_fsl_booke.o
+endif
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+endif
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 77fecfba..1b891b8 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -83,6 +83,8 @@
unsigned long r5, unsigned long r6, unsigned long r7);
extern void chrp_init(unsigned long r3, unsigned long r4,
unsigned long r5, unsigned long r6, unsigned long r7);
+
+dev_t boot_dev;
#endif /* CONFIG_PPC_MULTIPLATFORM */
#ifdef CONFIG_MAGIC_SYSRQ
@@ -405,11 +407,13 @@
_machine = _MACH_prep;
}
+#ifdef CONFIG_PPC_PREP
/* not much more to do here, if prep */
if (_machine == _MACH_prep) {
prep_init(r3, r4, r5, r6, r7);
return;
}
+#endif
/* prom_init has already been called from __start */
if (boot_infos)
@@ -480,12 +484,16 @@
#endif /* CONFIG_ADB */
switch (_machine) {
+#ifdef CONFIG_PPC_PMAC
case _MACH_Pmac:
pmac_init(r3, r4, r5, r6, r7);
break;
+#endif
+#ifdef CONFIG_PPC_CHRP
case _MACH_chrp:
chrp_init(r3, r4, r5, r6, r7);
break;
+#endif
}
}
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index fccafbc..8bc734f 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -89,9 +89,6 @@
#define cached_21 (((char *)(ppc_cached_irq_mask))[3])
#define cached_A1 (((char *)(ppc_cached_irq_mask))[2])
-/* for the mac fs */
-dev_t boot_dev;
-
#ifdef CONFIG_SOUND_CS4232
long ppc_cs4232_dma, ppc_cs4232_dma2;
#endif
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index b8d08f3..1b0a849 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -5,6 +5,7 @@
CFLAGS_prom_init.o += -fPIC
CFLAGS_btext.o += -fPIC
+ifneq ($(CONFIG_PPC_MERGE),y)
wdt-mpc8xx-$(CONFIG_8xx_WDT) += m8xx_wdt.o
obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
@@ -109,3 +110,16 @@
ifeq ($(CONFIG_PPC_MPC52xx),y)
obj-$(CONFIG_PCI) += mpc52xx_pci.o
endif
+
+else
+# Stuff still needed by the merged powerpc sources
+
+obj-$(CONFIG_PPCBUG_NVRAM) += prep_nvram.o
+obj-$(CONFIG_PPC_OF) += prom_init.o prom.o of_device.o
+obj-$(CONFIG_PPC_PMAC) += indirect_pci.o
+obj-$(CONFIG_PPC_CHRP) += indirect_pci.o i8259.o
+obj-$(CONFIG_PPC_PREP) += indirect_pci.o i8259.o todc_time.o
+obj-$(CONFIG_BOOTX_TEXT) += btext.o
+obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o ppc_sys.o
+
+endif
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 7671945..5034618 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -405,7 +405,7 @@
bright_req_2.complete = 1;
batt_req.complete = 1;
-#ifdef CONFIG_PPC32
+#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
if (pmu_kind == PMU_KEYLARGO_BASED)
openpic_set_irq_priority(vias->intrs[0].line,
OPENPIC_PRIORITY_DEFAULT + 1);
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index a345355..5b6b0b6 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -629,12 +629,4 @@
if (entry)
entry->proc_fops = &proc_sysrq_trigger_operations;
#endif
-#ifdef CONFIG_PPC32
- {
- extern struct file_operations ppc_htab_operations;
- entry = create_proc_entry("ppc_htab", S_IRUGO|S_IWUSR, NULL);
- if (entry)
- entry->proc_fops = &ppc_htab_operations;
- }
-#endif
}
diff --git a/include/asm-powerpc/kdebug.h b/include/asm-powerpc/kdebug.h
new file mode 100644
index 0000000..7c55abf
--- /dev/null
+++ b/include/asm-powerpc/kdebug.h
@@ -0,0 +1,42 @@
+#ifndef _POWERPC_KDEBUG_H
+#define _POWERPC_KDEBUG_H 1
+
+/* nearly identical to x86_64/i386 code */
+
+#include <linux/notifier.h>
+
+struct pt_regs;
+
+struct die_args {
+ struct pt_regs *regs;
+ const char *str;
+ long err;
+ int trapnr;
+ int signr;
+};
+
+/*
+ Note - you should never unregister because that can race with NMIs.
+ If you really want to do it first unregister - then synchronize_sched -
+ then free.
+ */
+int register_die_notifier(struct notifier_block *nb);
+extern struct notifier_block *powerpc_die_chain;
+
+/* Grossly misnamed. */
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_IABR_MATCH,
+ DIE_DABR_MATCH,
+ DIE_BPT,
+ DIE_SSTEP,
+ DIE_PAGE_FAULT,
+};
+
+static inline int notify_die(enum die_val val,char *str,struct pt_regs *regs,long err,int trap, int sig)
+{
+ struct die_args args = { .regs=regs, .str=str, .err=err, .trapnr=trap,.signr=sig };
+ return notifier_call_chain(&powerpc_die_chain, val, &args);
+}
+
+#endif
diff --git a/include/asm-powerpc/kprobes.h b/include/asm-powerpc/kprobes.h
new file mode 100644
index 0000000..d9129d2
--- /dev/null
+++ b/include/asm-powerpc/kprobes.h
@@ -0,0 +1,67 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ * Kernel Probes (KProbes)
+ * include/asm-ppc64/kprobes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ * Probes initial implementation ( includes suggestions from
+ * Rusty Russell).
+ * 2004-Nov Modified for PPC64 by Ananth N Mavinakayanahalli
+ * <ananth@in.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct pt_regs;
+
+typedef unsigned int kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION 0x7fe00008 /* trap */
+#define MAX_INSN_SIZE 1
+
+#define IS_TW(instr) (((instr) & 0xfc0007fe) == 0x7c000008)
+#define IS_TD(instr) (((instr) & 0xfc0007fe) == 0x7c000088)
+#define IS_TDI(instr) (((instr) & 0xfc000000) == 0x08000000)
+#define IS_TWI(instr) (((instr) & 0xfc000000) == 0x0c000000)
+
+#define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)((func_descr_t *)pentry)
+
+#define is_trap(instr) (IS_TW(instr) || IS_TD(instr) || \
+ IS_TWI(instr) || IS_TDI(instr))
+
+#define ARCH_SUPPORTS_KRETPROBES
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+ /* copy of original instruction */
+ kprobe_opcode_t *insn;
+};
+
+#ifdef CONFIG_KPROBES
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+#else /* !CONFIG_KPROBES */
+static inline int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ return 0;
+}
+#endif
+#endif /* _ASM_KPROBES_H */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
new file mode 100644
index 0000000..f1e24f4
--- /dev/null
+++ b/include/asm-powerpc/mpic.h
@@ -0,0 +1,279 @@
+#include <linux/irq.h>
+
+/*
+ * Global registers
+ */
+
+#define MPIC_GREG_BASE 0x01000
+
+#define MPIC_GREG_FEATURE_0 0x00000
+#define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000
+#define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16
+#define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00
+#define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8
+#define MPIC_GREG_FEATURE_VERSION_MASK 0xff
+#define MPIC_GREG_FEATURE_1 0x00010
+#define MPIC_GREG_GLOBAL_CONF_0 0x00020
+#define MPIC_GREG_GCONF_RESET 0x80000000
+#define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000
+#define MPIC_GREG_GCONF_BASE_MASK 0x000fffff
+#define MPIC_GREG_GLOBAL_CONF_1 0x00030
+#define MPIC_GREG_VENDOR_0 0x00040
+#define MPIC_GREG_VENDOR_1 0x00050
+#define MPIC_GREG_VENDOR_2 0x00060
+#define MPIC_GREG_VENDOR_3 0x00070
+#define MPIC_GREG_VENDOR_ID 0x00080
+#define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000
+#define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16
+#define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00
+#define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8
+#define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff
+#define MPIC_GREG_PROCESSOR_INIT 0x00090
+#define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0
+#define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0
+#define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0
+#define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0
+#define MPIC_GREG_SPURIOUS 0x000e0
+#define MPIC_GREG_TIMER_FREQ 0x000f0
+
+/*
+ *
+ * Timer registers
+ */
+#define MPIC_TIMER_BASE 0x01100
+#define MPIC_TIMER_STRIDE 0x40
+
+#define MPIC_TIMER_CURRENT_CNT 0x00000
+#define MPIC_TIMER_BASE_CNT 0x00010
+#define MPIC_TIMER_VECTOR_PRI 0x00020
+#define MPIC_TIMER_DESTINATION 0x00030
+
+/*
+ * Per-Processor registers
+ */
+
+#define MPIC_CPU_THISBASE 0x00000
+#define MPIC_CPU_BASE 0x20000
+#define MPIC_CPU_STRIDE 0x01000
+
+#define MPIC_CPU_IPI_DISPATCH_0 0x00040
+#define MPIC_CPU_IPI_DISPATCH_1 0x00050
+#define MPIC_CPU_IPI_DISPATCH_2 0x00060
+#define MPIC_CPU_IPI_DISPATCH_3 0x00070
+#define MPIC_CPU_CURRENT_TASK_PRI 0x00080
+#define MPIC_CPU_TASKPRI_MASK 0x0000000f
+#define MPIC_CPU_WHOAMI 0x00090
+#define MPIC_CPU_WHOAMI_MASK 0x0000001f
+#define MPIC_CPU_INTACK 0x000a0
+#define MPIC_CPU_EOI 0x000b0
+
+/*
+ * Per-source registers
+ */
+
+#define MPIC_IRQ_BASE 0x10000
+#define MPIC_IRQ_STRIDE 0x00020
+#define MPIC_IRQ_VECTOR_PRI 0x00000
+#define MPIC_VECPRI_MASK 0x80000000
+#define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */
+#define MPIC_VECPRI_PRIORITY_MASK 0x000f0000
+#define MPIC_VECPRI_PRIORITY_SHIFT 16
+#define MPIC_VECPRI_VECTOR_MASK 0x000007ff
+#define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000
+#define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000
+#define MPIC_VECPRI_POLARITY_MASK 0x00800000
+#define MPIC_VECPRI_SENSE_LEVEL 0x00400000
+#define MPIC_VECPRI_SENSE_EDGE 0x00000000
+#define MPIC_VECPRI_SENSE_MASK 0x00400000
+#define MPIC_IRQ_DESTINATION 0x00010
+
+#define MPIC_MAX_IRQ_SOURCES 2048
+#define MPIC_MAX_CPUS 32
+#define MPIC_MAX_ISU 32
+
+/*
+ * Special vector numbers (internal use only)
+ */
+#define MPIC_VEC_SPURRIOUS 255
+#define MPIC_VEC_IPI_3 254
+#define MPIC_VEC_IPI_2 253
+#define MPIC_VEC_IPI_1 252
+#define MPIC_VEC_IPI_0 251
+
+/* unused */
+#define MPIC_VEC_TIMER_3 250
+#define MPIC_VEC_TIMER_2 249
+#define MPIC_VEC_TIMER_1 248
+#define MPIC_VEC_TIMER_0 247
+
+/* Type definition of the cascade handler */
+typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+/* Fixup table entry */
+struct mpic_irq_fixup
+{
+ u8 __iomem *base;
+ unsigned int irq;
+};
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+
+/* The instance data of a given MPIC */
+struct mpic
+{
+ /* The "linux" controller struct */
+ hw_irq_controller hc_irq;
+#ifdef CONFIG_SMP
+ hw_irq_controller hc_ipi;
+#endif
+ const char *name;
+ /* Flags */
+ unsigned int flags;
+ /* How many irq sources in a given ISU */
+ unsigned int isu_size;
+ unsigned int isu_shift;
+ unsigned int isu_mask;
+ /* Offset of irq vector numbers */
+ unsigned int irq_offset;
+ unsigned int irq_count;
+ /* Offset of ipi vector numbers */
+ unsigned int ipi_offset;
+ /* Number of sources */
+ unsigned int num_sources;
+ /* Number of CPUs */
+ unsigned int num_cpus;
+ /* cascade handler */
+ mpic_cascade_t cascade;
+ void *cascade_data;
+ unsigned int cascade_vec;
+ /* senses array */
+ unsigned char *senses;
+ unsigned int senses_count;
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ /* The fixup table */
+ struct mpic_irq_fixup *fixups;
+ spinlock_t fixup_lock;
+#endif
+
+ /* The various ioremap'ed bases */
+ volatile u32 __iomem *gregs;
+ volatile u32 __iomem *tmregs;
+ volatile u32 __iomem *cpuregs[MPIC_MAX_CPUS];
+ volatile u32 __iomem *isus[MPIC_MAX_ISU];
+
+ /* link */
+ struct mpic *next;
+};
+
+/* This is the primary controller, only that one has IPIs and
+ * has afinity control. A non-primary MPIC always uses CPU0
+ * registers only
+ */
+#define MPIC_PRIMARY 0x00000001
+/* Set this for a big-endian MPIC */
+#define MPIC_BIG_ENDIAN 0x00000002
+/* Broken U3 MPIC */
+#define MPIC_BROKEN_U3 0x00000004
+/* Broken IPI registers (autodetected) */
+#define MPIC_BROKEN_IPI 0x00000008
+/* MPIC wants a reset */
+#define MPIC_WANTS_RESET 0x00000010
+
+/* Allocate the controller structure and setup the linux irq descs
+ * for the range if interrupts passed in. No HW initialization is
+ * actually performed.
+ *
+ * @phys_addr: physial base address of the MPIC
+ * @flags: flags, see constants above
+ * @isu_size: number of interrupts in an ISU. Use 0 to use a
+ * standard ISU-less setup (aka powermac)
+ * @irq_offset: first irq number to assign to this mpic
+ * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0
+ * to match the number of sources
+ * @ipi_offset: first irq number to assign to this mpic IPI sources,
+ * used only on primary mpic
+ * @senses: array of sense values
+ * @senses_num: number of entries in the array
+ *
+ * Note about the sense array. If none is passed, all interrupts are
+ * setup to be level negative unless MPIC_BROKEN_U3 is set in which
+ * case they are edge positive (and the array is ignored anyway).
+ * The values in the array start at the first source of the MPIC,
+ * that is senses[0] correspond to linux irq "irq_offset".
+ */
+extern struct mpic *mpic_alloc(unsigned long phys_addr,
+ unsigned int flags,
+ unsigned int isu_size,
+ unsigned int irq_offset,
+ unsigned int irq_count,
+ unsigned int ipi_offset,
+ unsigned char *senses,
+ unsigned int senses_num,
+ const char *name);
+
+/* Assign ISUs, to call before mpic_init()
+ *
+ * @mpic: controller structure as returned by mpic_alloc()
+ * @isu_num: ISU number
+ * @phys_addr: physical address of the ISU
+ */
+extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
+ unsigned long phys_addr);
+
+/* Initialize the controller. After this has been called, none of the above
+ * should be called again for this mpic
+ */
+extern void mpic_init(struct mpic *mpic);
+
+/* Setup a cascade. Currently, only one cascade is supported this
+ * way, though you can always do a normal request_irq() and add
+ * other cascades this way. You should call this _after_ having
+ * added all the ISUs
+ *
+ * @irq_no: "linux" irq number of the cascade (that is offset'ed vector)
+ * @handler: cascade handler function
+ */
+extern void mpic_setup_cascade(unsigned int irq_no, mpic_cascade_t hanlder,
+ void *data);
+
+/*
+ * All of the following functions must only be used after the
+ * ISUs have been assigned and the controller fully initialized
+ * with mpic_init()
+ */
+
+
+/* Change/Read the priority of an interrupt. Default is 8 for irqs and
+ * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
+ * IPI number is then the offset'ed (linux irq number mapped to the IPI)
+ */
+extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
+extern unsigned int mpic_irq_get_priority(unsigned int irq);
+
+/* Setup a non-boot CPU */
+extern void mpic_setup_this_cpu(void);
+
+/* Clean up for kexec (or cpu offline or ...) */
+extern void mpic_teardown_this_cpu(int secondary);
+
+/* Get the current cpu priority for this cpu (0..15) */
+extern int mpic_cpu_get_priority(void);
+
+/* Set the current cpu priority for this cpu */
+extern void mpic_cpu_set_priority(int prio);
+
+/* Request IPIs on primary mpic */
+extern void mpic_request_ipis(void);
+
+/* Send an IPI (non offseted number 0..3) */
+extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
+
+/* Fetch interrupt from a given mpic */
+extern int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs);
+/* This one gets to the primary mpic */
+extern int mpic_get_irq(struct pt_regs *regs);
+
+/* global mpic for pSeries */
+extern struct mpic *pSeries_mpic;
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
new file mode 100644
index 0000000..f97a5f1
--- /dev/null
+++ b/include/asm-powerpc/reg.h
@@ -0,0 +1,446 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_PPC_REGS_H__
+#define __ASM_PPC_REGS_H__
+
+#include <linux/stringify.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif
+
+/* Machine State Register (MSR) Fields */
+#define MSR_SF (1<<63)
+#define MSR_ISF (1<<61)
+#define MSR_VEC (1<<25) /* Enable AltiVec */
+#define MSR_POW (1<<18) /* Enable Power Management */
+#define MSR_WE (1<<18) /* Wait State Enable */
+#define MSR_TGPR (1<<17) /* TLB Update registers in use */
+#define MSR_CE (1<<17) /* Critical Interrupt Enable */
+#define MSR_ILE (1<<16) /* Interrupt Little Endian */
+#define MSR_EE (1<<15) /* External Interrupt Enable */
+#define MSR_PR (1<<14) /* Problem State / Privilege Level */
+#define MSR_FP (1<<13) /* Floating Point enable */
+#define MSR_ME (1<<12) /* Machine Check Enable */
+#define MSR_FE0 (1<<11) /* Floating Exception mode 0 */
+#define MSR_SE (1<<10) /* Single Step */
+#define MSR_BE (1<<9) /* Branch Trace */
+#define MSR_DE (1<<9) /* Debug Exception Enable */
+#define MSR_FE1 (1<<8) /* Floating Exception mode 1 */
+#define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */
+#define MSR_IR (1<<5) /* Instruction Relocate */
+#define MSR_DR (1<<4) /* Data Relocate */
+#define MSR_PE (1<<3) /* Protection Enable */
+#define MSR_PX (1<<2) /* Protection Exclusive Mode */
+#define MSR_RI (1<<1) /* Recoverable Exception */
+#define MSR_LE (1<<0) /* Little Endian */
+
+/* Default MSR for kernel mode. */
+#ifdef CONFIG_APUS_FAST_EXCEPT
+#define MSR_KERNEL (MSR_ME|MSR_IP|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#ifndef MSR_KERNEL
+#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX 0x80000000 /* FPU exception summary */
+#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
+#define FPSCR_VX 0x20000000 /* Invalid operation summary */
+#define FPSCR_OX 0x10000000 /* Overflow exception summary */
+#define FPSCR_UX 0x08000000 /* Underflow exception summary */
+#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */
+#define FPSCR_XX 0x02000000 /* Inexact exception summary */
+#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
+#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
+#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
+#define FPSCR_FR 0x00040000 /* Fraction rounded */
+#define FPSCR_FI 0x00020000 /* Fraction inexact */
+#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
+#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
+#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
+#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
+#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
+#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
+#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
+#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
+#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
+#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
+#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
+#define FPSCR_RN 0x00000003 /* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR 0x009 /* Count Register */
+#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
+#define DABR_TRANSLATION (1UL << 2)
+#define SPRN_DAR 0x013 /* Data Address Register */
+#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
+#define DSISR_NOHPTE 0x40000000 /* no translation found */
+#define DSISR_PROTFAULT 0x08000000 /* protection fault */
+#define DSISR_ISSTORE 0x02000000 /* access was a store */
+#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
+#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
+#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
+#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
+#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
+
+#define SPRN_DEC 0x016 /* Decrement Register */
+#define SPRN_DER 0x095 /* Debug Enable Regsiter */
+#define DER_RSTE 0x40000000 /* Reset Interrupt */
+#define DER_CHSTPE 0x20000000 /* Check Stop */
+#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
+#define DER_EXTIE 0x02000000 /* External Interrupt */
+#define DER_ALIE 0x01000000 /* Alignment Interrupt */
+#define DER_PRIE 0x00800000 /* Program Interrupt */
+#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
+#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
+#define DER_SYSIE 0x00040000 /* System Call Interrupt */
+#define DER_TRE 0x00020000 /* Trace Interrupt */
+#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
+#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
+#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
+#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
+#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
+#define SPRN_EAR 0x11A /* External Address Register */
+#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
+#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
+#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
+#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
+#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
+#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
+#define HID0_SBCLK (1<<27)
+#define HID0_EICE (1<<26)
+#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
+#define HID0_ECLK (1<<25)
+#define HID0_PAR (1<<24)
+#define HID0_STEN (1<<24) /* Software table search enable - 745x */
+#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
+#define HID0_DOZE (1<<23)
+#define HID0_NAP (1<<22)
+#define HID0_SLEEP (1<<21)
+#define HID0_DPM (1<<20)
+#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
+#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
+#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
+#define HID0_ICE (1<<15) /* Instruction Cache Enable */
+#define HID0_DCE (1<<14) /* Data Cache Enable */
+#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
+#define HID0_DLOCK (1<<12) /* Data Cache Lock */
+#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
+#define HID0_DCI (1<<10) /* Data Cache Invalidate */
+#define HID0_SPD (1<<9) /* Speculative disable */
+#define HID0_DAPUEN (1<<8) /* Debug APU enable */
+#define HID0_SGE (1<<7) /* Store Gathering Enable */
+#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
+#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */
+#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
+#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
+#define HID0_ABE (1<<3) /* Address Broadcast Enable */
+#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
+#define HID0_BHTE (1<<2) /* Branch History Table Enable */
+#define HID0_BTCD (1<<1) /* Branch target cache disable */
+#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
+#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
+#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
+#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
+#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
+#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
+#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
+#define HID1_PS (1<<16) /* 750FX PLL selection */
+#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
+#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
+#define SPRN_HID4 0x3F4 /* 970 HID4 */
+#define SPRN_HID5 0x3F6 /* 970 HID5 */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
+#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
+#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
+#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
+#define ICTRL_EICP 0x00000100 /* enable icache par. check */
+#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
+#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
+#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2 0x3f8
+#define L2CR_L2E 0x80000000 /* L2 enable */
+#define L2CR_L2PE 0x40000000 /* L2 parity enable */
+#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
+#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
+#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
+#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
+#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
+#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
+#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
+#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
+#define L2CR_L2DO 0x00400000 /* L2 data only */
+#define L2CR_L2I 0x00200000 /* L2 global invalidate */
+#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
+#define L2CR_L2WT 0x00080000 /* L2 write-through */
+#define L2CR_L2TS 0x00040000 /* L2 test support */
+#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
+#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
+#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
+#define L2CR_L2DF 0x00004000 /* L2 differential clock */
+#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
+#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
+#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
+#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
+#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
+#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Regsiter */
+#define L3CR_L3E 0x80000000 /* L3 enable */
+#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
+#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
+#define L3CR_L3SIZ 0x10000000 /* L3 size */
+#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
+#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
+#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
+#define L3CR_L3IO 0x00400000 /* L3 instruction only */
+#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
+#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
+#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
+#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
+#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
+#define L3CR_L3I 0x00000400 /* L3 global invalidate */
+#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
+#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO 0x00000040 /* L3 data only mode */
+#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
+#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
+#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
+#define SPRN_LDSTDB 0x3f4 /* */
+#define SPRN_LR 0x008 /* Link Register */
+#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
+#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
+#ifndef SPRN_PIR
+#define SPRN_PIR 0x3FF /* Processor Identification Register */
+#endif
+#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
+#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
+#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
+#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PVR 0x11F /* Processor Version Register */
+#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
+#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
+#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
+#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
+#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
+#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
+#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
+#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
+#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
+#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
+#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
+#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
+#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
+#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
+#ifndef SPRN_SVR
+#define SPRN_SVR 0x11E /* System Version Register */
+#endif
+#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN (1 << 31)
+#define THRM1_TIV (1 << 30)
+#define THRM1_THRES(x) ((x&0x7f)<<23)
+#define THRM3_SITV(x) ((x&0x3fff)<<1)
+#define THRM1_TID (1<<2)
+#define THRM1_TIE (1<<1)
+#define THRM1_V (1<<0)
+#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
+#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
+#define THRM3_E (1<<0)
+#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
+#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
+#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
+#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
+#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
+#define SPRN_XER 0x001 /* Fixed Point Exception Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES (1 << 7)
+#define MMCR0_PMC1_ICACHEMISS (5 << 7)
+#define MMCR0_PMC1_DTLB (6 << 7)
+#define MMCR0_PMC2_DCACHEMISS 0x6
+#define MMCR0_PMC2_CYCLES 0x1
+#define MMCR0_PMC2_ITLB 0x7
+#define MMCR0_PMC2_LOADMISSTIME 0x5
+#define MMCR0_PMXE (1 << 26)
+
+/* Processor Version Register */
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr) (((pvr) >> 16) & 0xFFFF) /* Version field */
+#define PVR_REV(pvr) (((pvr) >> 0) & 0xFFFF) /* Revison field */
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr) (((pvr) >> 20) & 0xFFF) /* Family field */
+#define PVR_MEM(pvr) (((pvr) >> 16) & 0xF) /* Member field */
+#define PVR_CORE(pvr) (((pvr) >> 12) & 0xF) /* Core field */
+#define PVR_CFG(pvr) (((pvr) >> 8) & 0xF) /* Configuration field */
+#define PVR_MAJ(pvr) (((pvr) >> 4) & 0xF) /* Major revision field */
+#define PVR_MIN(pvr) (((pvr) >> 0) & 0xF) /* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA 0x00200000
+#define PVR_403GB 0x00200100
+#define PVR_403GC 0x00200200
+#define PVR_403GCX 0x00201400
+#define PVR_405GP 0x40110000
+#define PVR_STB03XXX 0x40310000
+#define PVR_NP405H 0x41410000
+#define PVR_NP405L 0x41610000
+#define PVR_601 0x00010000
+#define PVR_602 0x00050000
+#define PVR_603 0x00030000
+#define PVR_603e 0x00060000
+#define PVR_603ev 0x00070000
+#define PVR_603r 0x00071000
+#define PVR_604 0x00040000
+#define PVR_604e 0x00090000
+#define PVR_604r 0x000A0000
+#define PVR_620 0x00140000
+#define PVR_740 0x00080000
+#define PVR_750 PVR_740
+#define PVR_740P 0x10080000
+#define PVR_750P PVR_740P
+#define PVR_7400 0x000C0000
+#define PVR_7410 0x800C0000
+#define PVR_7450 0x80000000
+#define PVR_8540 0x80200000
+#define PVR_8560 0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821 0x00500000
+#define PVR_823 PVR_821
+#define PVR_850 PVR_821
+#define PVR_860 PVR_821
+#define PVR_8240 0x00810100
+#define PVR_8245 0x80811014
+#define PVR_8260 PVR_8240
+
+#if 0
+/* Segment Registers */
+#define SR0 0
+#define SR1 1
+#define SR2 2
+#define SR3 3
+#define SR4 4
+#define SR5 5
+#define SR6 6
+#define SR7 7
+#define SR8 8
+#define SR9 9
+#define SR10 10
+#define SR11 11
+#define SR12 12
+#define SR13 13
+#define SR14 14
+#define SR15 15
+#endif
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr() ({unsigned int rval; \
+ asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#define mtmsr(v) asm volatile("mtmsr %0" : : "r" (v))
+
+#define mfspr(rn) ({unsigned int rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval;})
+#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#define mfsrin(v) ({unsigned int rval; \
+ asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+ rval;})
+
+#define proc_trap() asm volatile("trap")
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PPC_REGS_H__ */
+#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h
new file mode 100644
index 0000000..be542ef
--- /dev/null
+++ b/include/asm-powerpc/system.h
@@ -0,0 +1,350 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef __PPC_SYSTEM_H
+#define __PPC_SYSTEM_H
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+
+#include <asm/hw_irq.h>
+#include <asm/ppc_asm.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory). The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ * across this point (nop on PPC).
+ *
+ * We have to use the sync instructions for mb(), since lwsync doesn't
+ * order loads with respect to previous stores. Lwsync is fine for
+ * rmb(), though. Note that lwsync is interpreted as sync by
+ * 32-bit and older 64-bit CPUs.
+ *
+ * For wmb(), we use sync since wmb is used in drivers to order
+ * stores to system memory with respect to writes to the device.
+ * However, smp_wmb() can be a lighter-weight eieio barrier on
+ * SMP since it is only used to order updates to system memory.
+ */
+#define mb() __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb() __asm__ __volatile__ ("lwsync" : : : "memory")
+#define wmb() __asm__ __volatile__ ("sync" : : : "memory")
+#define read_barrier_depends() do { } while(0)
+
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() __asm__ __volatile__ ("eieio" : : : "memory")
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while(0)
+#endif /* CONFIG_SMP */
+
+#ifdef __KERNEL__
+struct task_struct;
+struct pt_regs;
+
+#ifdef CONFIG_DEBUGGER
+
+extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
+extern int (*__debugger_bpt)(struct pt_regs *regs);
+extern int (*__debugger_sstep)(struct pt_regs *regs);
+extern int (*__debugger_iabr_match)(struct pt_regs *regs);
+extern int (*__debugger_dabr_match)(struct pt_regs *regs);
+extern int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+#define DEBUGGER_BOILERPLATE(__NAME) \
+static inline int __NAME(struct pt_regs *regs) \
+{ \
+ if (unlikely(__ ## __NAME)) \
+ return __ ## __NAME(regs); \
+ return 0; \
+}
+
+DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
+DEBUGGER_BOILERPLATE(debugger_bpt)
+DEBUGGER_BOILERPLATE(debugger_sstep)
+DEBUGGER_BOILERPLATE(debugger_iabr_match)
+DEBUGGER_BOILERPLATE(debugger_dabr_match)
+DEBUGGER_BOILERPLATE(debugger_fault_handler)
+
+#ifdef CONFIG_XMON
+extern void xmon_init(int enable);
+#endif
+
+#else
+static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
+static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
+static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
+static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
+#endif
+
+extern int set_dabr(unsigned long dabr);
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR() 0L
+#define _get_L3CR() 0L
+#define _set_L2CR(val) do { } while(0)
+#define _set_L3CR(val) do { } while(0)
+#endif
+
+extern void via_cuda_init(void);
+extern void pmac_nvram_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void enable_kernel_fp(void);
+extern void flush_fp_to_thread(struct task_struct *);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, unsigned long *fpscr);
+extern void cvt_df(double *from, float *to, unsigned long *fpscr);
+
+#ifdef CONFIG_ALTIVEC
+extern void flush_altivec_to_thread(struct task_struct *);
+#else
+static inline void flush_altivec_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_SPE
+extern void flush_spe_to_thread(struct task_struct *);
+#else
+static inline void flush_spe_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern void *cacheable_memcpy(void *, const void *, unsigned int);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern int die(const char *, struct pt_regs *, long);
+extern void _exception(int, struct pt_regs *, int, unsigned long);
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+#endif /* CONFIG_BOOKE_WDT */
+
+/* EBCDIC -> ASCII conversion for [0-9A-Z] on iSeries */
+extern unsigned char e2a(unsigned char);
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+ struct task_struct *);
+#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+ struct thread_struct *next);
+
+extern unsigned int rtas_data;
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __inline__ unsigned long
+__xchg_u32(volatile void *p, unsigned long val)
+{
+ unsigned long prev;
+
+ __asm__ __volatile__(
+ EIEIO_ON_SMP
+"1: lwarx %0,0,%2 \n"
+ PPC405_ERR77(0,%2)
+" stwcx. %3,0,%2 \n\
+ bne- 1b"
+ ISYNC_ON_SMP
+ : "=&r" (prev), "=m" (*(volatile unsigned int *)p)
+ : "r" (p), "r" (val), "m" (*(volatile unsigned int *)p)
+ : "cc", "memory");
+
+ return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __inline__ unsigned long
+__xchg_u64(volatile void *p, unsigned long val)
+{
+ unsigned long prev;
+
+ __asm__ __volatile__(
+ EIEIO_ON_SMP
+"1: ldarx %0,0,%2 \n"
+ PPC405_ERR77(0,%2)
+" stdcx. %3,0,%2 \n\
+ bne- 1b"
+ ISYNC_ON_SMP
+ : "=&r" (prev), "=m" (*(volatile unsigned long *)p)
+ : "r" (p), "r" (val), "m" (*(volatile unsigned long *)p)
+ : "cc", "memory");
+
+ return prev;
+}
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__xchg(volatile void *ptr, unsigned long x, unsigned int size)
+{
+ switch (size) {
+ case 4:
+ return __xchg_u32(ptr, x);
+#ifdef CONFIG_PPC64
+ case 8:
+ return __xchg_u64(ptr, x);
+#endif
+ }
+ __xchg_called_with_bad_pointer();
+ return x;
+}
+
+#define xchg(ptr,x) \
+ ({ \
+ __typeof__(*(ptr)) _x_ = (x); \
+ (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+ })
+
+#define tas(ptr) (xchg((ptr),1))
+
+/*
+ * Compare and exchange - if *p == old, set it to new,
+ * and return the old value of *p.
+ */
+#define __HAVE_ARCH_CMPXCHG 1
+
+static __inline__ unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
+{
+ unsigned int prev;
+
+ __asm__ __volatile__ (
+ EIEIO_ON_SMP
+"1: lwarx %0,0,%2 # __cmpxchg_u32\n\
+ cmpw 0,%0,%3\n\
+ bne- 2f\n"
+ PPC405_ERR77(0,%2)
+" stwcx. %4,0,%2\n\
+ bne- 1b"
+ ISYNC_ON_SMP
+ "\n\
+2:"
+ : "=&r" (prev), "=m" (*p)
+ : "r" (p), "r" (old), "r" (new), "m" (*p)
+ : "cc", "memory");
+
+ return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __inline__ unsigned long
+__cmpxchg_u64(volatile long *p, unsigned long old, unsigned long new)
+{
+ unsigned long prev;
+
+ __asm__ __volatile__ (
+ EIEIO_ON_SMP
+"1: ldarx %0,0,%2 # __cmpxchg_u64\n\
+ cmpd 0,%0,%3\n\
+ bne- 2f\n\
+ stdcx. %4,0,%2\n\
+ bne- 1b"
+ ISYNC_ON_SMP
+ "\n\
+2:"
+ : "=&r" (prev), "=m" (*p)
+ : "r" (p), "r" (old), "r" (new), "m" (*p)
+ : "cc", "memory");
+
+ return prev;
+}
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __inline__ unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+ unsigned int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+#ifdef CONFIG_PPC64
+ case 8:
+ return __cmpxchg_u64(ptr, old, new);
+#endif
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ({ \
+ __typeof__(*(ptr)) _o_ = (o); \
+ __typeof__(*(ptr)) _n_ = (n); \
+ (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
+ (unsigned long)_n_, sizeof(*(ptr))); \
+ })
+
+#ifdef CONFIG_PPC64
+/*
+ * We handle most unaligned accesses in hardware. On the other hand
+ * unaligned DMA can be very expensive on some ppc64 IO chips (it does
+ * powers of 2 writes until it reaches sufficient alignment).
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ */
+#define NET_IP_ALIGN 0
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_SYSTEM_H */
diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h
index 829481c..79c1be3 100644
--- a/include/asm-ppc/smp.h
+++ b/include/asm-ppc/smp.h
@@ -45,30 +45,21 @@
extern void __cpu_die(unsigned int cpu);
extern void cpu_die(void) __attribute__((noreturn));
-#define NO_PROC_ID 0xFF /* No processor magic marker */
-#define PROC_CHANGE_PENALTY 20
-
#define raw_smp_processor_id() (current_thread_info()->cpu)
extern int __cpu_up(unsigned int cpu);
extern int smp_hw_index[];
-#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
-
-struct klock_info_struct {
- unsigned long kernel_flag;
- unsigned char akp;
-};
-
-extern struct klock_info_struct klock_info;
-#define KLOCK_HELD 0xffffffff
-#define KLOCK_CLEAR 0x0
+#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()])
+#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)])
#endif /* __ASSEMBLY__ */
#else /* !(CONFIG_SMP) */
static inline void cpu_die(void) { }
+#define get_hard_smp_processor_id(cpu) 0
+#define hard_smp_processor_id() 0
#endif /* !(CONFIG_SMP) */