[media] tuners: remove dvb_frontend_parameters from set_params()
This is a big patch, yet trivial: now that all tuners use the DVBv5
way to pass parameters (e. g. via fe->dtv_property_cache), the
extra parameter can be removed from set_params() call.
After this change, very few DVBv3 specific stuff are left at the
tuners.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 70c3be6..81ef4b4 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -30,7 +30,7 @@
"if applicable for the device (default: 0=automatic/off).");
struct dib0700_adapter_state {
- int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
+ int (*set_param_save) (struct dvb_frontend *);
const struct firmware *frontend_firmware;
};
@@ -804,7 +804,7 @@
.charge_pump = 2,
};
-static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+static int dib7070_set_param_override(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -819,11 +819,10 @@
}
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
- return state->set_param_save(fe, fep);
+ return state->set_param_save(fe);
}
-static int dib7770_set_param_override(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *fep)
+static int dib7770_set_param_override(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -844,7 +843,7 @@
}
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
- return state->set_param_save(fe, fep);
+ return state->set_param_save(fe);
}
static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
@@ -1207,8 +1206,7 @@
}
};
-static int dib807x_set_param_override(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *fep)
+static int dib807x_set_param_override(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1227,7 +1225,7 @@
deb_info("WBD for DiB8000: %d\n", offset);
dib8000_set_wbd_ref(fe, offset);
- return state->set_param_save(fe, fep);
+ return state->set_param_save(fe);
}
static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
@@ -1506,8 +1504,7 @@
.fref_clock_ratio = 6,
};
-static int dib8096_set_param_override(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *fep)
+static int dib8096_set_param_override(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1518,7 +1515,7 @@
enum frontend_tune_state tune_state = CT_SHUTDOWN;
u16 ltgain, rf_gain_limit;
- ret = state->set_param_save(fe, fep);
+ ret = state->set_param_save(fe);
if (ret < 0)
return ret;
@@ -1823,8 +1820,7 @@
{0xffffffff, 0, 0, 0}, /* 60 MHz */
};
-static int dib8096p_agc_startup(struct dvb_frontend *fe,
- struct dvb_frontend_parameters *fep)
+static int dib8096p_agc_startup(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1834,7 +1830,7 @@
int better_sampling_freq = 0, ret;
struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0];
- ret = state->set_param_save(fe, fep);
+ ret = state->set_param_save(fe);
if (ret < 0)
return ret;
memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
@@ -2325,7 +2321,7 @@
return 0;
}
-static int dib7090_agc_startup(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
+static int dib7090_agc_startup(struct dvb_frontend *fe)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
struct dib0700_adapter_state *state = adap->priv;
@@ -2334,7 +2330,7 @@
struct dib7090p_best_adc adc;
int ret;
- ret = state->set_param_save(fe, fep);
+ ret = state->set_param_save(fe);
if (ret < 0)
return ret;