[PATCH] USB: new devices for the Option driver
This patch extends the "option" driver with a few more devices, some of
which are actually connected to USB the "right" way -- as opposed to
doing it via PCMCIA and OHCI.
Signed-Off-By: Matthias Urlichs <smurf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 759d360..b0861b6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1,5 +1,5 @@
/*
- Option Card (PCMCIA to) USB to Serial Driver
+ USB Driver for GSM modems
Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
@@ -28,15 +28,34 @@
2005-09-10 v0.4.3 added HUAWEI E600 card and Audiovox AirCard
2005-09-20 v0.4.4 increased recv buffer size: the card sometimes
wants to send >2000 bytes.
- 2006-04-10 v0.4.2 fixed two array overrun errors :-/
+ 2006-04-10 v0.5 fixed two array overrun errors :-/
+ 2006-04-21 v0.5.1 added support for Sierra Wireless MC8755
+ 2006-05-15 v0.6 re-enable multi-port support
+ 2006-06-01 v0.6.1 add COBRA
+ 2006-06-01 v0.6.2 add backwards-compatibility stuff
+ 2006-06-01 v0.6.3 add Novatel Wireless
+ 2006-06-01 v0.7 Option => GSM
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+ This driver exists because the "normal" serial driver doesn't work too well
+ with GSM modems. Issues:
+ - data loss -- one single Receive URB is not nearly enough
+ - nonstandard flow (Option devices) and multiplex (Sierra) control
+ - controlling the baud rate doesn't make sense
+
+ This driver is named "option" because the most common device it's
+ used for is a PC-Card (with an internal OHCI-USB interface, behind
+ which the GSM interface sits), made by Option Inc.
+
+ Some of the "one port" devices actually exhibit multiple USB instances
+ on the USB bus. This is not a bug, these ports are used for different
+ device features.
*/
-#define DRIVER_VERSION "v0.4"
+#define DRIVER_VERSION "v0.7.0"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
-#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
+#define DRIVER_DESC "USB Driver for GSM modems"
#include <linux/config.h>
#include <linux/kernel.h>
@@ -74,22 +93,45 @@
static int option_send_setup(struct usb_serial_port *port);
/* Vendor and product IDs */
-#define OPTION_VENDOR_ID 0x0AF0
-#define HUAWEI_VENDOR_ID 0x12D1
-#define AUDIOVOX_VENDOR_ID 0x0F3D
+#define OPTION_VENDOR_ID 0x0AF0
+#define HUAWEI_VENDOR_ID 0x12D1
+#define AUDIOVOX_VENDOR_ID 0x0F3D
+#define SIERRAWIRELESS_VENDOR_ID 0x1199
+#define NOVATELWIRELESS_VENDOR_ID 0x1410
-#define OPTION_PRODUCT_OLD 0x5000
-#define OPTION_PRODUCT_FUSION 0x6000
-#define OPTION_PRODUCT_FUSION2 0x6300
-#define HUAWEI_PRODUCT_E600 0x1001
-#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
+#define OPTION_PRODUCT_OLD 0x5000
+#define OPTION_PRODUCT_FUSION 0x6000
+#define OPTION_PRODUCT_FUSION2 0x6300
+#define OPTION_PRODUCT_COBRA 0x6500
+#define HUAWEI_PRODUCT_E600 0x1001
+#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
+#define SIERRAWIRELESS_PRODUCT_MC8755 0x6802
+#define NOVATELWIRELESS_PRODUCT_U740 0x1400
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
+ { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
+ { } /* Terminating entry */
+};
+
+static struct usb_device_id option_ids1[] = {
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
+ { } /* Terminating entry */
+};
+static struct usb_device_id option_ids3[] = {
+ { USB_DEVICE(SIERRAWIRELESS_VENDOR_ID, SIERRAWIRELESS_PRODUCT_MC8755) },
{ } /* Terminating entry */
};
@@ -111,12 +153,39 @@
.owner = THIS_MODULE,
.name = "option",
},
- .description = "Option 3G data card",
- .id_table = option_ids,
+ .description = "GSM modem (3-port)",
+ .id_table = option_ids3,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
- .num_ports = 1, /* 3, but the card reports its ports separately */
+ .num_ports = 3,
+ .open = option_open,
+ .close = option_close,
+ .write = option_write,
+ .write_room = option_write_room,
+ .chars_in_buffer = option_chars_in_buffer,
+ .throttle = option_rx_throttle,
+ .unthrottle = option_rx_unthrottle,
+ .set_termios = option_set_termios,
+ .break_ctl = option_break_ctl,
+ .tiocmget = option_tiocmget,
+ .tiocmset = option_tiocmset,
+ .attach = option_startup,
+ .shutdown = option_shutdown,
+ .read_int_callback = option_instat_callback,
+};
+
+static struct usb_serial_driver option_1port_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "option",
+ },
+ .description = "GSM modem (1-port)",
+ .id_table = option_ids1,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1,
.open = option_open,
.close = option_close,
.write = option_write,
@@ -170,6 +239,9 @@
static int __init option_init(void)
{
int retval;
+ retval = usb_serial_register(&option_1port_device);
+ if (retval)
+ goto failed_1port_device_register;
retval = usb_serial_register(&option_3port_device);
if (retval)
goto failed_3port_device_register;
@@ -184,6 +256,8 @@
failed_driver_register:
usb_serial_deregister (&option_3port_device);
failed_3port_device_register:
+ usb_serial_deregister (&option_1port_device);
+failed_1port_device_register:
return retval;
}
@@ -191,6 +265,7 @@
{
usb_deregister (&option_driver);
usb_serial_deregister (&option_3port_device);
+ usb_serial_deregister (&option_1port_device);
}
module_init(option_init);
@@ -572,27 +647,30 @@
/* Setup urbs */
static void option_setup_urbs(struct usb_serial *serial)
{
- int j;
+ int i,j;
struct usb_serial_port *port;
struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
- port = serial->port[0];
- portdata = usb_get_serial_port_data(port);
+
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
/* Do indat endpoints first */
- for (j = 0; j < N_IN_URB; ++j) {
- portdata->in_urbs[j] = option_setup_urb (serial,
- port->bulk_in_endpointAddress, USB_DIR_IN, port,
- portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
- }
+ for (j = 0; j < N_IN_URB; ++j) {
+ portdata->in_urbs[j] = option_setup_urb (serial,
+ port->bulk_in_endpointAddress, USB_DIR_IN, port,
+ portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+ }
- /* outdat endpoints */
- for (j = 0; j < N_OUT_URB; ++j) {
- portdata->out_urbs[j] = option_setup_urb (serial,
- port->bulk_out_endpointAddress, USB_DIR_OUT, port,
- portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+ /* outdat endpoints */
+ for (j = 0; j < N_OUT_URB; ++j) {
+ portdata->out_urbs[j] = option_setup_urb (serial,
+ port->bulk_out_endpointAddress, USB_DIR_OUT, port,
+ portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+ }
}
}