Merge tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next
Pull omap fbdev changes from Tomi Valkeinen:
- DT support for the panel drivers that were still missing it
- TI AM43xx support
- TI OMAP5 support
* tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (46 commits)
OMAPDSS: move 'compatible' converter to omapdss driver
OMAPDSS: HDMI: fix devm_ioremap_resource error checks
OMAPDSS: HDMI: remove unused defines
OMAPDSS: HDMI: cleanup WP ioremaps
OMAPDSS: panel NEC-NL8048HL11 DT support
Doc/DT: Add DT binding documentation for TPO td043mtea1 panel
OMAPDSS: Panel TPO-TD043MTEA1 DT support
Doc/DT: Add DT binding documentation for SHARP LS037V7DW01
OMAPDSS: panel sharp-ls037v7dw01 DT support
OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod
Doc/DT: Add binding doc for lgphilips,lb035q02.txt
OMAPDSS: panel-lgphilips-lb035q02: Add DT support
OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO
OMAPDSS: panel-dpi: enable-gpio
OMAPDSS: Fix writes to DISPC_POL_FREQ
Doc/DT: Add OMAP5 DSS DT bindings
OMAPDSS: HDMI: cleanup ioremaps
OMAPDSS: HDMI: Add OMAP5 HDMI support
OMAPDSS: HDMI: PLL changes for OMAP5
...
diff --git a/Documentation/devicetree/bindings/video/hdmi-connector.txt b/Documentation/devicetree/bindings/video/hdmi-connector.txt
index ccccc19..acd5668 100644
--- a/Documentation/devicetree/bindings/video/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/video/hdmi-connector.txt
@@ -7,6 +7,7 @@
Optional properties:
- label: a symbolic name for the connector
+- hpd-gpios: HPD GPIO number
Required nodes:
- Video port for HDMI input
diff --git a/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
new file mode 100644
index 0000000..1a1e653
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt
@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+=========================
+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+ compatible = "lgphilips,lb035q02";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+
+ enable-gpios = <&gpio7 7 0>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/video/panel-dpi.txt b/Documentation/devicetree/bindings/video/panel-dpi.txt
new file mode 100644
index 0000000..a40180b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dpi.txt
@@ -0,0 +1,45 @@
+Generic MIPI DPI Panel
+======================
+
+Required properties:
+- compatible: "panel-dpi"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: panel enable gpio
+
+Required nodes:
+- "panel-timing" containing video timings
+ (Documentation/devicetree/bindings/video/display-timing.txt)
+- Video port for DPI input
+
+Example
+-------
+
+lcd0: display@0 {
+ compatible = "samsung,lte430wq-f0c", "panel-dpi";
+ label = "lcd";
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
new file mode 100644
index 0000000..0cc8981
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
@@ -0,0 +1,43 @@
+SHARP LS037V7DW01 TFT-LCD panel
+===================================
+
+Required properties:
+- compatible: "sharp,ls037v7dw01"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: a GPIO spec for the optional enable pin.
+ This pin is the INI pin as specified in the LS037V7DW01.pdf file.
+- reset-gpios: a GPIO spec for the optional reset pin.
+ This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
+- mode-gpios: a GPIO
+ ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
+
+Required nodes:
+- Video port for DPI input
+
+This panel can have zero to five GPIOs to configure to change configuration
+between QVGA and VGA mode and the scan direction. As these pins can be also
+configured with external pulls, all the GPIOs are considered optional with holes
+in the array.
+
+Example
+-------
+
+Example when connected to a omap2+ based device:
+
+lcd0: display {
+ compatible = "sharp,ls037v7dw01";
+ power-supply = <&lcd_3v3>;
+ enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
+ reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
+ mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
+ &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
+ &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
index f85d6fc..b8c29fb 100644
--- a/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
+++ b/Documentation/devicetree/bindings/video/ti,omap4-dss.txt
@@ -109,3 +109,7 @@
Optional nodes:
- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+ D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/video/ti,omap5-dss.txt b/Documentation/devicetree/bindings/video/ti,omap5-dss.txt
new file mode 100644
index 0000000..38ffc8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,omap5-dss.txt
@@ -0,0 +1,96 @@
+Texas Instruments OMAP5 Display Subsystem
+=========================================
+
+See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
+description about OMAP Display Subsystem bindings.
+
+DSS Core
+--------
+
+Required properties:
+- compatible: "ti,omap5-dss"
+- reg: address and length of the register space
+- ti,hwmods: "dss_core"
+- clocks: handle to fclk
+- clock-names: "fck"
+
+Required nodes:
+- DISPC
+
+Optional nodes:
+- DSS Submodules: RFBI, DSI, HDMI
+- Video port for DPI output
+
+DPI Endpoint required properties:
+- data-lines: number of lines used
+
+
+DISPC
+-----
+
+Required properties:
+- compatible: "ti,omap5-dispc"
+- reg: address and length of the register space
+- ti,hwmods: "dss_dispc"
+- interrupts: the DISPC interrupt
+- clocks: handle to fclk
+- clock-names: "fck"
+
+
+RFBI
+----
+
+Required properties:
+- compatible: "ti,omap5-rfbi"
+- reg: address and length of the register space
+- ti,hwmods: "dss_rfbi"
+- clocks: handles to fclk and iclk
+- clock-names: "fck", "ick"
+
+Optional nodes:
+- Video port for RFBI output
+- RFBI controlled peripherals
+
+
+DSI
+---
+
+Required properties:
+- compatible: "ti,omap5-dsi"
+- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
+- reg-names: "proto", "phy", "pll"
+- interrupts: the DSI interrupt line
+- ti,hwmods: "dss_dsi1" or "dss_dsi2"
+- vdd-supply: power supply for DSI
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for DSI output
+- DSI controlled peripherals
+
+DSI Endpoint required properties:
+- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
+ DATA1+, DATA1-, ...
+
+
+HDMI
+----
+
+Required properties:
+- compatible: "ti,omap5-hdmi"
+- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
+ 'core'
+- reg-names: "wp", "pll", "phy", "core"
+- interrupts: the HDMI interrupt line
+- ti,hwmods: "dss_hdmi"
+- vdda-supply: vdda power supply
+- clocks: handles to fclk and pll clock
+- clock-names: "fck", "sys_clk"
+
+Optional nodes:
+- Video port for HDMI output
+
+HDMI Endpoint optional properties:
+- lanes: list of 8 pin numbers for the HDMI lanes: CLK+, CLK-, D0+, D0-,
+ D1+, D1-, D2+, D2-. (default: 0,1,2,3,4,5,6,7)
diff --git a/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
new file mode 100644
index 0000000..7175dc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+ compatible = "toppoly,td028ttec1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
+
diff --git a/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt b/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt
new file mode 100644
index 0000000..ec6d629
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt
@@ -0,0 +1,33 @@
+TPO TD043MTEA1 Panel
+====================
+
+Required properties:
+- compatible: "tpo,td043mtea1"
+- reset-gpios: panel reset gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+ compatible = "tpo,td043mtea1";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+
+ label = "lcd";
+
+ reset-gpios = <&gpio7 7 0>;
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 16d33d8..bf852d7 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -279,6 +279,8 @@
return OMAPDSS_VER_OMAP4;
else if (soc_is_omap54xx())
return OMAPDSS_VER_OMAP5;
+ else if (soc_is_am43xx())
+ return OMAPDSS_VER_AM43xx;
else
return OMAPDSS_VER_UNKNOWN;
}
@@ -555,65 +557,9 @@
return r;
}
-/* list of 'compatible' nodes to convert to omapdss specific */
-static const char * const dss_compat_conv_list[] __initconst = {
- "composite-connector",
- "dvi-connector",
- "hdmi-connector",
- "panel-dpi",
- "panel-dsi-cm",
- "sony,acx565akm",
- "svideo-connector",
- "ti,tfp410",
- "ti,tpd12s015",
-};
-
-/* prepend compatible string with "omapdss," */
-static __init void omapdss_omapify_node(struct device_node *node,
- const char *compat)
-{
- char *new_compat;
- struct property *prop;
-
- new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat);
-
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-
- if (!prop) {
- pr_err("omapdss_omapify_node: kzalloc failed\n");
- return;
- }
-
- prop->name = "compatible";
- prop->value = new_compat;
- prop->length = strlen(new_compat) + 1;
-
- of_update_property(node, prop);
-}
-
-/*
- * As omapdss panel drivers are omapdss specific, but we want to define the
- * DT-data in generic manner, we convert the compatible strings of the panel
- * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both
- * correct DT data and omapdss specific drivers.
- *
- * When we get generic panel drivers to the kernel, this will be removed.
- */
void __init omapdss_early_init_of(void)
{
- int i;
- for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) {
- const char *compat = dss_compat_conv_list[i];
- struct device_node *node = NULL;
-
- while ((node = of_find_compatible_node(node, NULL, compat))) {
- if (!of_device_is_available(node))
- continue;
-
- omapdss_omapify_node(node, compat);
- }
- }
}
struct device_node * __init omapdss_find_dss_of_node(void)
@@ -632,6 +578,10 @@
if (node)
return node;
+ node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss");
+ if (node)
+ return node;
+
return NULL;
}
diff --git a/drivers/video/fbdev/omap2/Makefile b/drivers/video/fbdev/omap2/Makefile
index bf8127d..f8745ec 100644
--- a/drivers/video/fbdev/omap2/Makefile
+++ b/drivers/video/fbdev/omap2/Makefile
@@ -1,5 +1,5 @@
obj-$(CONFIG_OMAP2_VRFB) += vrfb.o
-obj-$(CONFIG_OMAP2_DSS) += dss/
+obj-y += dss/
obj-y += displays-new/
obj-$(CONFIG_FB_OMAP2) += omapfb/
diff --git a/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
index 29ed21b..4420ccb 100644
--- a/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <drm/drm_edid.h>
@@ -43,6 +44,8 @@
struct device *dev;
struct omap_video_timings timings;
+
+ int hpd_gpio;
};
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
@@ -161,7 +164,10 @@
struct panel_drv_data *ddata = to_panel_data(dssdev);
struct omap_dss_device *in = ddata->in;
- return in->ops.hdmi->detect(in);
+ if (gpio_is_valid(ddata->hpd_gpio))
+ return gpio_get_value_cansleep(ddata->hpd_gpio);
+ else
+ return in->ops.hdmi->detect(in);
}
static int hdmic_audio_enable(struct omap_dss_device *dssdev)
@@ -288,6 +294,8 @@
pdata = dev_get_platdata(&pdev->dev);
+ ddata->hpd_gpio = -ENODEV;
+
in = omap_dss_find_output(pdata->source);
if (in == NULL) {
dev_err(&pdev->dev, "Failed to find video source\n");
@@ -307,6 +315,14 @@
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct device_node *node = pdev->dev.of_node;
struct omap_dss_device *in;
+ int gpio;
+
+ /* HPD GPIO */
+ gpio = of_get_named_gpio(node, "hpd-gpios", 0);
+ if (gpio_is_valid(gpio))
+ ddata->hpd_gpio = gpio;
+ else
+ ddata->hpd_gpio = -ENODEV;
in = omapdss_of_find_source_for_first_ep(node);
if (IS_ERR(in)) {
@@ -344,6 +360,13 @@
return -ENODEV;
}
+ if (gpio_is_valid(ddata->hpd_gpio)) {
+ r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
+ GPIOF_DIR_IN, "hdmi_hpd");
+ if (r)
+ goto err_reg;
+ }
+
ddata->timings = hdmic_default_timings;
dssdev = &ddata->dssdev;
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index 5f8f7e7..3636b61 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
@@ -13,9 +13,12 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
+#include <video/of_display_timing.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
@@ -25,8 +28,10 @@
struct omap_video_timings videomode;
+ /* used for non-DT boot, to be removed */
int backlight_gpio;
- int enable_gpio;
+
+ struct gpio_desc *enable_gpio;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -70,15 +75,16 @@
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
if (r)
return r;
- if (gpio_is_valid(ddata->enable_gpio))
- gpio_set_value_cansleep(ddata->enable_gpio, 1);
+ if (ddata->enable_gpio)
+ gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -96,8 +102,8 @@
if (!omapdss_device_is_enabled(dssdev))
return;
- if (gpio_is_valid(ddata->enable_gpio))
- gpio_set_value_cansleep(ddata->enable_gpio, 0);
+ if (ddata->enable_gpio)
+ gpiod_set_value_cansleep(ddata->enable_gpio, 0);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -156,6 +162,7 @@
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev, *in;
struct videomode vm;
+ int r;
pdata = dev_get_platdata(&pdev->dev);
@@ -176,10 +183,65 @@
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
- ddata->enable_gpio = pdata->enable_gpio;
+ r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
+ GPIOF_OUT_INIT_LOW, "panel enable");
+ if (r)
+ goto err_gpio;
+
+ ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
ddata->backlight_gpio = pdata->backlight_gpio;
return 0;
+
+err_gpio:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int panel_dpi_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+ int r;
+ struct display_timing timing;
+ struct videomode vm;
+ struct gpio_desc *gpio;
+
+ gpio = devm_gpiod_get(&pdev->dev, "enable");
+
+ if (IS_ERR(gpio)) {
+ if (PTR_ERR(gpio) != -ENOENT)
+ return PTR_ERR(gpio);
+ else
+ gpio = NULL;
+ } else {
+ gpiod_direction_output(gpio, 0);
+ }
+
+ ddata->enable_gpio = gpio;
+
+ ddata->backlight_gpio = -ENOENT;
+
+ r = of_get_display_timing(node, "panel-timing", &timing);
+ if (r) {
+ dev_err(&pdev->dev, "failed to get video timing\n");
+ return r;
+ }
+
+ videomode_from_timing(&timing, &vm);
+ videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
}
static int panel_dpi_probe(struct platform_device *pdev)
@@ -198,17 +260,14 @@
r = panel_dpi_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = panel_dpi_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
- if (gpio_is_valid(ddata->enable_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->enable_gpio,
- GPIOF_OUT_INIT_LOW, "panel enable");
- if (r)
- goto err_gpio;
- }
-
if (gpio_is_valid(ddata->backlight_gpio)) {
r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
GPIOF_OUT_INIT_LOW, "panel backlight");
@@ -254,12 +313,20 @@
return 0;
}
+static const struct of_device_id panel_dpi_of_match[] = {
+ { .compatible = "omapdss,panel-dpi", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
+
static struct platform_driver panel_dpi_driver = {
.probe = panel_dpi_probe,
.remove = __exit_p(panel_dpi_remove),
.driver = {
.name = "panel-dpi",
.owner = THIS_MODULE,
+ .of_match_table = panel_dpi_of_match,
},
};
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 2e6b513..cc5b512 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
@@ -50,9 +50,10 @@
struct omap_video_timings videomode;
- int reset_gpio;
+ /* used for non-DT boot, to be removed */
int backlight_gpio;
- int enable_gpio;
+
+ struct gpio_desc *enable_gpio;
};
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
@@ -158,15 +159,16 @@
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
if (r)
return r;
- if (gpio_is_valid(ddata->enable_gpio))
- gpio_set_value_cansleep(ddata->enable_gpio, 1);
+ if (ddata->enable_gpio)
+ gpiod_set_value_cansleep(ddata->enable_gpio, 1);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 1);
@@ -184,8 +186,8 @@
if (!omapdss_device_is_enabled(dssdev))
return;
- if (gpio_is_valid(ddata->enable_gpio))
- gpio_set_value_cansleep(ddata->enable_gpio, 0);
+ if (ddata->enable_gpio)
+ gpiod_set_value_cansleep(ddata->enable_gpio, 0);
if (gpio_is_valid(ddata->backlight_gpio))
gpio_set_value_cansleep(ddata->backlight_gpio, 0);
@@ -243,6 +245,7 @@
const struct panel_lb035q02_platform_data *pdata;
struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
struct omap_dss_device *dssdev, *in;
+ int r;
pdata = dev_get_platdata(&spi->dev);
@@ -260,10 +263,48 @@
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
- ddata->enable_gpio = pdata->enable_gpio;
+ r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+ GPIOF_OUT_INIT_LOW, "panel enable");
+ if (r)
+ goto err_gpio;
+
+ ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
ddata->backlight_gpio = pdata->backlight_gpio;
return 0;
+err_gpio:
+ omap_dss_put_device(ddata->in);
+ return r;
+}
+
+static int lb035q02_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+ struct gpio_desc *gpio;
+
+ gpio = devm_gpiod_get(&spi->dev, "enable");
+ if (IS_ERR(gpio)) {
+ dev_err(&spi->dev, "failed to parse enable gpio\n");
+ return PTR_ERR(gpio);
+ } else {
+ gpiod_direction_output(gpio, 0);
+ ddata->enable_gpio = gpio;
+ }
+
+ ddata->backlight_gpio = -ENOENT;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
}
static int lb035q02_panel_spi_probe(struct spi_device *spi)
@@ -284,17 +325,14 @@
r = lb035q02_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = lb035q02_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
- if (gpio_is_valid(ddata->enable_gpio)) {
- r = devm_gpio_request_one(&spi->dev, ddata->enable_gpio,
- GPIOF_OUT_INIT_LOW, "panel enable");
- if (r)
- goto err_gpio;
- }
-
if (gpio_is_valid(ddata->backlight_gpio)) {
r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
GPIOF_OUT_INIT_LOW, "panel backlight");
@@ -342,17 +380,26 @@
return 0;
}
+static const struct of_device_id lb035q02_of_match[] = {
+ { .compatible = "omapdss,lgphilips,lb035q02", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, lb035q02_of_match);
+
static struct spi_driver lb035q02_spi_driver = {
.probe = lb035q02_panel_spi_probe,
.remove = lb035q02_panel_spi_remove,
.driver = {
.name = "panel_lgphilips_lb035q02",
.owner = THIS_MODULE,
+ .of_match_table = lb035q02_of_match,
},
};
module_spi_driver(lb035q02_spi_driver);
+MODULE_ALIAS("spi:lgphilips,lb035q02");
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
index 996fa00..3595f11 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
@@ -16,6 +16,7 @@
#include <linux/spi/spi.h>
#include <linux/fb.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -156,7 +157,8 @@
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
@@ -258,6 +260,34 @@
return 0;
}
+static int nec_8048_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+ int gpio;
+
+ gpio = of_get_named_gpio(node, "reset-gpios", 0);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(&spi->dev, "failed to parse enable gpio\n");
+ return gpio;
+ }
+ ddata->res_gpio = gpio;
+
+ /* XXX the panel spec doesn't mention any QVGA pin?? */
+ ddata->qvga_gpio = -ENOENT;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int nec_8048_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -289,6 +319,10 @@
r = nec_8048_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = nec_8048_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -377,11 +411,19 @@
#define NEC_8048_PM_OPS NULL
#endif
+static const struct of_device_id nec_8048_of_match[] = {
+ { .compatible = "omapdss,nec,nl8048hl11", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, nec_8048_of_match);
+
static struct spi_driver nec_8048_driver = {
.driver = {
.name = "panel-nec-nl8048hl11",
.owner = THIS_MODULE,
.pm = NEC_8048_PM_OPS,
+ .of_match_table = nec_8048_of_match,
},
.probe = nec_8048_probe,
.remove = nec_8048_remove,
@@ -389,6 +431,7 @@
module_spi_driver(nec_8048_driver);
+MODULE_ALIAS("spi:nec,nl8048hl11");
MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index b2f710b..f1f72ce 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
@@ -12,25 +12,28 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-
+#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
+ struct regulator *vcc;
int data_lines;
struct omap_video_timings videomode;
- int resb_gpio;
- int ini_gpio;
- int mo_gpio;
- int lr_gpio;
- int ud_gpio;
+ struct gpio_desc *resb_gpio; /* low = reset active min 20 us */
+ struct gpio_desc *ini_gpio; /* high = power on */
+ struct gpio_desc *mo_gpio; /* low = 480x640, high = 240x320 */
+ struct gpio_desc *lr_gpio; /* high = conventional horizontal scanning */
+ struct gpio_desc *ud_gpio; /* high = conventional vertical scanning */
};
static const struct omap_video_timings sharp_ls_timings = {
@@ -95,21 +98,30 @@
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
+ if (ddata->vcc) {
+ r = regulator_enable(ddata->vcc);
+ if (r != 0)
+ return r;
+ }
+
r = in->ops.dpi->enable(in);
- if (r)
+ if (r) {
+ regulator_disable(ddata->vcc);
return r;
+ }
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
- if (gpio_is_valid(ddata->resb_gpio))
- gpio_set_value_cansleep(ddata->resb_gpio, 1);
+ if (ddata->resb_gpio)
+ gpiod_set_value_cansleep(ddata->resb_gpio, 1);
- if (gpio_is_valid(ddata->ini_gpio))
- gpio_set_value_cansleep(ddata->ini_gpio, 1);
+ if (ddata->ini_gpio)
+ gpiod_set_value_cansleep(ddata->ini_gpio, 1);
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
@@ -124,11 +136,11 @@
if (!omapdss_device_is_enabled(dssdev))
return;
- if (gpio_is_valid(ddata->ini_gpio))
- gpio_set_value_cansleep(ddata->ini_gpio, 0);
+ if (ddata->ini_gpio)
+ gpiod_set_value_cansleep(ddata->ini_gpio, 0);
- if (gpio_is_valid(ddata->resb_gpio))
- gpio_set_value_cansleep(ddata->resb_gpio, 0);
+ if (ddata->resb_gpio)
+ gpiod_set_value_cansleep(ddata->resb_gpio, 0);
/* wait at least 5 vsyncs after disabling the LCD */
@@ -136,6 +148,9 @@
in->ops.dpi->disable(in);
+ if (ddata->vcc)
+ regulator_disable(ddata->vcc);
+
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
@@ -182,11 +197,32 @@
.get_resolution = omapdss_default_get_resolution,
};
+static int sharp_ls_get_gpio(struct device *dev, int gpio, unsigned long flags,
+ char *desc, struct gpio_desc **gpiod)
+{
+ struct gpio_desc *gd;
+ int r;
+
+ *gpiod = NULL;
+
+ r = devm_gpio_request_one(dev, gpio, flags, desc);
+ if (r)
+ return r == -ENOENT ? 0 : r;
+
+ gd = gpio_to_desc(gpio);
+ if (IS_ERR(gd))
+ return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
+
+ *gpiod = gd;
+ return 0;
+}
+
static int sharp_ls_probe_pdata(struct platform_device *pdev)
{
const struct panel_sharp_ls037v7dw01_platform_data *pdata;
struct panel_drv_data *ddata = platform_get_drvdata(pdev);
struct omap_dss_device *dssdev, *in;
+ int r;
pdata = dev_get_platdata(&pdev->dev);
@@ -204,11 +240,95 @@
dssdev = &ddata->dssdev;
dssdev->name = pdata->name;
- ddata->resb_gpio = pdata->resb_gpio;
- ddata->ini_gpio = pdata->ini_gpio;
- ddata->mo_gpio = pdata->mo_gpio;
- ddata->lr_gpio = pdata->lr_gpio;
- ddata->ud_gpio = pdata->ud_gpio;
+ r = sharp_ls_get_gpio(&pdev->dev, pdata->mo_gpio, GPIOF_OUT_INIT_LOW,
+ "lcd MO", &ddata->mo_gpio);
+ if (r)
+ return r;
+ r = sharp_ls_get_gpio(&pdev->dev, pdata->lr_gpio, GPIOF_OUT_INIT_HIGH,
+ "lcd LR", &ddata->lr_gpio);
+ if (r)
+ return r;
+ r = sharp_ls_get_gpio(&pdev->dev, pdata->ud_gpio, GPIOF_OUT_INIT_HIGH,
+ "lcd UD", &ddata->ud_gpio);
+ if (r)
+ return r;
+ r = sharp_ls_get_gpio(&pdev->dev, pdata->resb_gpio, GPIOF_OUT_INIT_LOW,
+ "lcd RESB", &ddata->resb_gpio);
+ if (r)
+ return r;
+ r = sharp_ls_get_gpio(&pdev->dev, pdata->ini_gpio, GPIOF_OUT_INIT_LOW,
+ "lcd INI", &ddata->ini_gpio);
+ if (r)
+ return r;
+
+ return 0;
+}
+
+static int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
+ const char *desc, struct gpio_desc **gpiod)
+{
+ struct gpio_desc *gd;
+ int r;
+
+ *gpiod = NULL;
+
+ gd = devm_gpiod_get_index(dev, desc, index);
+ if (IS_ERR(gd))
+ return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
+
+ r = gpiod_direction_output(gd, val);
+ if (r)
+ return r;
+
+ *gpiod = gd;
+ return 0;
+}
+
+static int sharp_ls_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+ int r;
+
+ ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
+ if (IS_ERR(ddata->vcc)) {
+ dev_err(&pdev->dev, "failed to get regulator\n");
+ return PTR_ERR(ddata->vcc);
+ }
+
+ /* lcd INI */
+ r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
+ if (r)
+ return r;
+
+ /* lcd RESB */
+ r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
+ if (r)
+ return r;
+
+ /* lcd MO */
+ r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
+ if (r)
+ return r;
+
+ /* lcd LR */
+ r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
+ if (r)
+ return r;
+
+ /* lcd UD */
+ r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
+ if (r)
+ return r;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
return 0;
}
@@ -229,45 +349,14 @@
r = sharp_ls_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = sharp_ls_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
- if (gpio_is_valid(ddata->mo_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->mo_gpio,
- GPIOF_OUT_INIT_LOW, "lcd MO");
- if (r)
- goto err_gpio;
- }
-
- if (gpio_is_valid(ddata->lr_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->lr_gpio,
- GPIOF_OUT_INIT_HIGH, "lcd LR");
- if (r)
- goto err_gpio;
- }
-
- if (gpio_is_valid(ddata->ud_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->ud_gpio,
- GPIOF_OUT_INIT_HIGH, "lcd UD");
- if (r)
- goto err_gpio;
- }
-
- if (gpio_is_valid(ddata->resb_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->resb_gpio,
- GPIOF_OUT_INIT_LOW, "lcd RESB");
- if (r)
- goto err_gpio;
- }
-
- if (gpio_is_valid(ddata->ini_gpio)) {
- r = devm_gpio_request_one(&pdev->dev, ddata->ini_gpio,
- GPIOF_OUT_INIT_LOW, "lcd INI");
- if (r)
- goto err_gpio;
- }
-
ddata->videomode = sharp_ls_timings;
dssdev = &ddata->dssdev;
@@ -287,7 +376,6 @@
return 0;
err_reg:
-err_gpio:
omap_dss_put_device(ddata->in);
return r;
}
@@ -308,12 +396,20 @@
return 0;
}
+static const struct of_device_id sharp_ls_of_match[] = {
+ { .compatible = "omapdss,sharp,ls037v7dw01", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
+
static struct platform_driver sharp_ls_driver = {
.probe = sharp_ls_probe,
.remove = __exit_p(sharp_ls_remove),
.driver = {
.name = "panel-sharp-ls037v7dw01",
.owner = THIS_MODULE,
+ .of_match_table = sharp_ls_of_match,
},
};
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc..728808b 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
@@ -206,7 +206,8 @@
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
@@ -389,6 +390,23 @@
return 0;
}
+static int td028ttec1_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int td028ttec1_panel_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -418,6 +436,10 @@
r = td028ttec1_panel_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = td028ttec1_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -463,6 +485,13 @@
return 0;
}
+static const struct of_device_id td028ttec1_of_match[] = {
+ { .compatible = "omapdss,toppoly,td028ttec1", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
static struct spi_driver td028ttec1_spi_driver = {
.probe = td028ttec1_panel_probe,
.remove = td028ttec1_panel_remove,
@@ -470,11 +499,13 @@
.driver = {
.name = "panel-tpo-td028ttec1",
.owner = THIS_MODULE,
+ .of_match_table = td028ttec1_of_match,
},
};
module_spi_driver(td028ttec1_spi_driver);
+MODULE_ALIAS("spi:toppoly,td028ttec1");
MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
index 875b402..de78ab0 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
@@ -17,6 +17,7 @@
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/of_gpio.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
@@ -376,7 +377,8 @@
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
r = in->ops.dpi->enable(in);
@@ -489,6 +491,31 @@
return 0;
}
+static int tpo_td043_probe_of(struct spi_device *spi)
+{
+ struct device_node *node = spi->dev.of_node;
+ struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+ struct omap_dss_device *in;
+ int gpio;
+
+ gpio = of_get_named_gpio(node, "reset-gpios", 0);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(&spi->dev, "failed to parse enable gpio\n");
+ return gpio;
+ }
+ ddata->nreset_gpio = gpio;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&spi->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int tpo_td043_probe(struct spi_device *spi)
{
struct panel_drv_data *ddata;
@@ -518,6 +545,10 @@
r = tpo_td043_probe_pdata(spi);
if (r)
return r;
+ } else if (spi->dev.of_node) {
+ r = tpo_td043_probe_of(spi);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -629,11 +660,19 @@
static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
tpo_td043_spi_suspend, tpo_td043_spi_resume);
+static const struct of_device_id tpo_td043_of_match[] = {
+ { .compatible = "omapdss,tpo,td043mtea1", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
+
static struct spi_driver tpo_td043_spi_driver = {
.driver = {
.name = "panel-tpo-td043mtea1",
.owner = THIS_MODULE,
.pm = &tpo_td043_spi_pm,
+ .of_match_table = tpo_td043_of_match,
},
.probe = tpo_td043_probe,
.remove = tpo_td043_remove,
@@ -641,6 +680,7 @@
module_spi_driver(tpo_td043_spi_driver);
+MODULE_ALIAS("spi:tpo,td043mtea1");
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/dss/Kconfig b/drivers/video/fbdev/omap2/dss/Kconfig
index dde4281..285bcd1 100644
--- a/drivers/video/fbdev/omap2/dss/Kconfig
+++ b/drivers/video/fbdev/omap2/dss/Kconfig
@@ -1,6 +1,10 @@
+config OMAP2_DSS_INIT
+ bool
+
menuconfig OMAP2_DSS
tristate "OMAP2+ Display Subsystem support"
select VIDEOMODE_HELPERS
+ select OMAP2_DSS_INIT
help
OMAP2+ Display Subsystem support.
@@ -59,16 +63,32 @@
help
OMAP Video Encoder support for S-Video and composite TV-out.
+config OMAP2_DSS_HDMI_COMMON
+ bool
+
config OMAP4_DSS_HDMI
- bool "HDMI support"
+ bool "HDMI support for OMAP4"
default y
+ select OMAP2_DSS_HDMI_COMMON
help
- HDMI Interface. This adds the High Definition Multimedia Interface.
- See http://www.hdmi.org/ for HDMI specification.
+ HDMI support for OMAP4 based SoCs.
config OMAP4_DSS_HDMI_AUDIO
bool
+config OMAP5_DSS_HDMI
+ bool "HDMI support for OMAP5"
+ default n
+ select OMAP2_DSS_HDMI_COMMON
+ help
+ HDMI Interface for OMAP5 and similar cores. This adds the High
+ Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
+ specification.
+
+config OMAP5_DSS_HDMI_AUDIO
+ depends on OMAP5_DSS_HDMI
+ bool
+
config OMAP2_DSS_SDI
bool "SDI support"
default n
diff --git a/drivers/video/fbdev/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 8aec8bd..245f933 100644
--- a/drivers/video/fbdev/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_OMAP2_DSS_INIT) += omapdss-boot-init.o
obj-$(CONFIG_OMAP2_DSS) += omapdss.o
# Core DSS files
omapdss-y := core.o dss.o dss_features.o dispc.o dispc_coefs.o display.o \
@@ -10,6 +11,8 @@
omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
-omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi_common.o hdmi_wp.o hdmi_pll.o \
- hdmi_phy.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += hdmi_common.o hdmi_wp.o hdmi_pll.o \
+ hdmi_phy.o
+omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi4.o hdmi4_core.o
+omapdss-$(CONFIG_OMAP5_DSS_HDMI) += hdmi5.o hdmi5_core.o
ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG
diff --git a/drivers/video/fbdev/omap2/dss/core.c b/drivers/video/fbdev/omap2/dss/core.c
index ffa45c8..6b74f73 100644
--- a/drivers/video/fbdev/omap2/dss/core.c
+++ b/drivers/video/fbdev/omap2/dss/core.c
@@ -268,6 +268,9 @@
#ifdef CONFIG_OMAP4_DSS_HDMI
hdmi4_init_platform_driver,
#endif
+#ifdef CONFIG_OMAP5_DSS_HDMI
+ hdmi5_init_platform_driver,
+#endif
};
static void (*dss_output_drv_unreg_funcs[])(void) __exitdata = {
@@ -289,6 +292,9 @@
#ifdef CONFIG_OMAP4_DSS_HDMI
hdmi4_uninit_platform_driver,
#endif
+#ifdef CONFIG_OMAP5_DSS_HDMI
+ hdmi5_uninit_platform_driver,
+#endif
};
static bool dss_output_drv_loaded[ARRAY_SIZE(dss_output_drv_reg_funcs)];
diff --git a/drivers/video/fbdev/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index f18397c..7aa33b0 100644
--- a/drivers/video/fbdev/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -2577,9 +2577,9 @@
channel = dispc_ovl_get_channel_out(plane);
- DSSDBG("dispc_ovl_setup %d, pa %x, pa_uv %x, sw %d, %d,%d, %dx%d -> "
- "%dx%d, cmode %x, rot %d, mir %d, chan %d repl %d\n",
- plane, oi->paddr, oi->p_uv_addr, oi->screen_width, oi->pos_x,
+ DSSDBG("dispc_ovl_setup %d, pa %pad, pa_uv %pad, sw %d, %d,%d, %dx%d ->"
+ " %dx%d, cmode %x, rot %d, mir %d, chan %d repl %d\n",
+ plane, &oi->paddr, &oi->p_uv_addr, oi->screen_width, oi->pos_x,
oi->pos_y, oi->width, oi->height, oi->out_width, oi->out_height,
oi->color_mode, oi->rotation, oi->mirror, channel, replication);
@@ -2945,13 +2945,13 @@
BUG();
}
- l = dispc_read_reg(DISPC_POL_FREQ(channel));
- l |= FLD_VAL(onoff, 17, 17);
- l |= FLD_VAL(rf, 16, 16);
- l |= FLD_VAL(de_level, 15, 15);
- l |= FLD_VAL(ipc, 14, 14);
- l |= FLD_VAL(hsync_level, 13, 13);
- l |= FLD_VAL(vsync_level, 12, 12);
+ l = FLD_VAL(onoff, 17, 17) |
+ FLD_VAL(rf, 16, 16) |
+ FLD_VAL(de_level, 15, 15) |
+ FLD_VAL(ipc, 14, 14) |
+ FLD_VAL(hsync_level, 13, 13) |
+ FLD_VAL(vsync_level, 12, 12);
+
dispc_write_reg(DISPC_POL_FREQ(channel), l);
}
@@ -3656,6 +3656,7 @@
case OMAPDSS_VER_OMAP34xx_ES3:
case OMAPDSS_VER_OMAP3630:
case OMAPDSS_VER_AM35xx:
+ case OMAPDSS_VER_AM43xx:
src = &omap34xx_rev3_0_dispc_feats;
break;
@@ -3829,6 +3830,7 @@
{ .compatible = "ti,omap2-dispc", },
{ .compatible = "ti,omap3-dispc", },
{ .compatible = "ti,omap4-dispc", },
+ { .compatible = "ti,omap5-dispc", },
{},
};
diff --git a/drivers/video/fbdev/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 157921d..9368972 100644
--- a/drivers/video/fbdev/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
@@ -67,6 +67,7 @@
case OMAPDSS_VER_OMAP34xx_ES3:
case OMAPDSS_VER_OMAP3630:
case OMAPDSS_VER_AM35xx:
+ case OMAPDSS_VER_AM43xx:
return NULL;
case OMAPDSS_VER_OMAP4430_ES1:
@@ -103,6 +104,8 @@
return OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC;
case OMAP_DSS_CHANNEL_LCD2:
return OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC;
+ case OMAP_DSS_CHANNEL_LCD3:
+ return OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC;
default:
/* this shouldn't happen */
WARN_ON(1);
@@ -595,6 +598,7 @@
case OMAPDSS_VER_OMAP34xx_ES3:
case OMAPDSS_VER_OMAP3630:
case OMAPDSS_VER_AM35xx:
+ case OMAPDSS_VER_AM43xx:
return OMAP_DSS_CHANNEL_LCD;
case OMAPDSS_VER_OMAP4430_ES1:
diff --git a/drivers/video/fbdev/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index 8be9b04..4755a34 100644
--- a/drivers/video/fbdev/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -1161,6 +1161,7 @@
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct regulator *vdds_dsi;
+ int r;
if (dsi->vdds_dsi_reg != NULL)
return 0;
@@ -1173,6 +1174,15 @@
return PTR_ERR(vdds_dsi);
}
+ if (regulator_can_change_voltage(vdds_dsi)) {
+ r = regulator_set_voltage(vdds_dsi, 1800000, 1800000);
+ if (r) {
+ devm_regulator_put(vdds_dsi);
+ DSSERR("can't set the DSI regulator voltage\n");
+ return r;
+ }
+ }
+
dsi->vdds_dsi_reg = vdds_dsi;
return 0;
@@ -5122,6 +5132,7 @@
{
switch (omapdss_get_version()) {
case OMAPDSS_VER_OMAP24xx:
+ case OMAPDSS_VER_AM43xx:
DSSWARN("DSI not supported\n");
return OMAP_DSS_CHANNEL_LCD;
@@ -5723,9 +5734,16 @@
{ },
};
+static const struct dsi_module_id_data dsi_of_data_omap5[] = {
+ { .address = 0x58004000, .id = 0, },
+ { .address = 0x58009000, .id = 1, },
+ { },
+};
+
static const struct of_device_id dsi_of_match[] = {
{ .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
{ .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
+ { .compatible = "ti,omap5-dsi", .data = dsi_of_data_omap5, },
{},
};
diff --git a/drivers/video/fbdev/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index d55266c..6daeb7e 100644
--- a/drivers/video/fbdev/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -728,6 +728,13 @@
.dpi_select_source = &dss_dpi_select_source_omap5,
};
+static const struct dss_features am43xx_dss_feats __initconst = {
+ .fck_div_max = 0,
+ .dss_fck_multiplier = 0,
+ .parent_clk_name = NULL,
+ .dpi_select_source = &dss_dpi_select_source_omap2_omap3,
+};
+
static int __init dss_init_features(struct platform_device *pdev)
{
const struct dss_features *src;
@@ -764,6 +771,10 @@
src = &omap54xx_dss_feats;
break;
+ case OMAPDSS_VER_AM43xx:
+ src = &am43xx_dss_feats;
+ break;
+
default:
return -ENODEV;
}
@@ -784,12 +795,8 @@
return 0;
port = omapdss_of_get_next_port(parent, NULL);
- if (!port) {
-#ifdef CONFIG_OMAP2_DSS_DPI
- dpi_init_port(pdev, parent);
-#endif
+ if (!port)
return 0;
- }
do {
u32 reg;
@@ -813,7 +820,7 @@
return 0;
}
-static void dss_uninit_ports(void)
+static void __exit dss_uninit_ports(void)
{
#ifdef CONFIG_OMAP2_DSS_DPI
dpi_uninit_port();
@@ -946,6 +953,7 @@
{ .compatible = "ti,omap2-dss", },
{ .compatible = "ti,omap3-dss", },
{ .compatible = "ti,omap4-dss", },
+ { .compatible = "ti,omap5-dss", },
{},
};
diff --git a/drivers/video/fbdev/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 560078f..8ff22c1 100644
--- a/drivers/video/fbdev/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -419,6 +419,9 @@
int hdmi4_init_platform_driver(void) __init;
void hdmi4_uninit_platform_driver(void) __exit;
+int hdmi5_init_platform_driver(void) __init;
+void hdmi5_uninit_platform_driver(void) __exit;
+
/* RFBI */
int rfbi_init_platform_driver(void) __init;
void rfbi_uninit_platform_driver(void) __exit;
diff --git a/drivers/video/fbdev/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
index 7f89691..15088df 100644
--- a/drivers/video/fbdev/omap2/dss/dss_features.c
+++ b/drivers/video/fbdev/omap2/dss/dss_features.c
@@ -93,6 +93,17 @@
[FEAT_REG_DSIPLL_REGM_DSI] = { 26, 23 },
};
+static const struct dss_reg_field am43xx_dss_reg_fields[] = {
+ [FEAT_REG_FIRHINC] = { 12, 0 },
+ [FEAT_REG_FIRVINC] = { 28, 16 },
+ [FEAT_REG_FIFOLOWTHRESHOLD] = { 11, 0 },
+ [FEAT_REG_FIFOHIGHTHRESHOLD] = { 27, 16 },
+ [FEAT_REG_FIFOSIZE] = { 10, 0 },
+ [FEAT_REG_HORIZONTALACCU] = { 9, 0 },
+ [FEAT_REG_VERTICALACCU] = { 25, 16 },
+ [FEAT_REG_DISPC_CLK_SWITCH] = { 0, 0 },
+};
+
static const struct dss_reg_field omap4_dss_reg_fields[] = {
[FEAT_REG_FIRHINC] = { 12, 0 },
[FEAT_REG_FIRVINC] = { 28, 16 },
@@ -149,6 +160,11 @@
OMAP_DISPLAY_TYPE_VENC,
};
+static const enum omap_display_type am43xx_dss_supported_displays[] = {
+ /* OMAP_DSS_CHANNEL_LCD */
+ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI,
+};
+
static const enum omap_display_type omap4_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI,
@@ -200,6 +216,11 @@
OMAP_DSS_OUTPUT_VENC,
};
+static const enum omap_dss_output_id am43xx_dss_supported_outputs[] = {
+ /* OMAP_DSS_CHANNEL_LCD */
+ OMAP_DSS_OUTPUT_DPI | OMAP_DSS_OUTPUT_DBI,
+};
+
static const enum omap_dss_output_id omap4_dss_supported_outputs[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DSS_OUTPUT_DBI | OMAP_DSS_OUTPUT_DSI1,
@@ -444,6 +465,13 @@
[FEAT_PARAM_LINEWIDTH] = { 1, 1024 },
};
+static const struct dss_param_range am43xx_dss_param_range[] = {
+ [FEAT_PARAM_DSS_FCK] = { 0, 200000000 },
+ [FEAT_PARAM_DSS_PCD] = { 2, 255 },
+ [FEAT_PARAM_DOWNSCALE] = { 1, 4 },
+ [FEAT_PARAM_LINEWIDTH] = { 1, 1024 },
+};
+
static const struct dss_param_range omap4_dss_param_range[] = {
[FEAT_PARAM_DSS_FCK] = { 0, 186000000 },
[FEAT_PARAM_DSS_PCD] = { 1, 255 },
@@ -520,6 +548,21 @@
FEAT_OMAP3_DSI_FIFO_BUG,
};
+static const enum dss_feat_id am43xx_dss_feat_list[] = {
+ FEAT_LCDENABLEPOL,
+ FEAT_LCDENABLESIGNAL,
+ FEAT_PCKFREEENABLE,
+ FEAT_FUNCGATED,
+ FEAT_LINEBUFFERSPLIT,
+ FEAT_ROWREPEATENABLE,
+ FEAT_RESIZECONF,
+ FEAT_CPR,
+ FEAT_PRELOAD,
+ FEAT_FIR_COEF_V,
+ FEAT_ALPHA_FIXED_ZORDER,
+ FEAT_FIFO_MERGE,
+};
+
static const enum dss_feat_id omap3630_dss_feat_list[] = {
FEAT_LCDENABLEPOL,
FEAT_LCDENABLESIGNAL,
@@ -595,6 +638,7 @@
static const enum dss_feat_id omap5_dss_feat_list[] = {
FEAT_MGR_LCD2,
+ FEAT_MGR_LCD3,
FEAT_CORE_CLK_DIV,
FEAT_LCD_CLK_SRC,
FEAT_DSI_DCS_CMD_CONFIG_VC,
@@ -682,6 +726,26 @@
.burst_size_unit = 8,
};
+static const struct omap_dss_features am43xx_dss_features = {
+ .reg_fields = am43xx_dss_reg_fields,
+ .num_reg_fields = ARRAY_SIZE(am43xx_dss_reg_fields),
+
+ .features = am43xx_dss_feat_list,
+ .num_features = ARRAY_SIZE(am43xx_dss_feat_list),
+
+ .num_mgrs = 1,
+ .num_ovls = 3,
+ .supported_displays = am43xx_dss_supported_displays,
+ .supported_outputs = am43xx_dss_supported_outputs,
+ .supported_color_modes = omap3_dss_supported_color_modes,
+ .overlay_caps = omap3430_dss_overlay_caps,
+ .clksrc_names = omap2_dss_clk_source_names,
+ .dss_params = am43xx_dss_param_range,
+ .supported_rotation_types = OMAP_DSS_ROT_DMA,
+ .buffer_size_unit = 1,
+ .burst_size_unit = 8,
+};
+
static const struct omap_dss_features omap3630_dss_features = {
.reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
@@ -777,7 +841,7 @@
.features = omap5_dss_feat_list,
.num_features = ARRAY_SIZE(omap5_dss_feat_list),
- .num_mgrs = 3,
+ .num_mgrs = 4,
.num_ovls = 4,
.supported_displays = omap5_dss_supported_displays,
.supported_outputs = omap5_dss_supported_outputs,
@@ -928,6 +992,10 @@
omap_current_dss_features = &am35xx_dss_features;
break;
+ case OMAPDSS_VER_AM43xx:
+ omap_current_dss_features = &am43xx_dss_features;
+ break;
+
default:
DSSWARN("Unsupported OMAP version");
break;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index e25681f..fbee078 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
@@ -80,6 +80,7 @@
#define HDMI_TXPHY_DIGITAL_CTRL 0x4
#define HDMI_TXPHY_POWER_CTRL 0x8
#define HDMI_TXPHY_PAD_CFG_CTRL 0xC
+#define HDMI_TXPHY_BIST_CONTROL 0x1C
enum hdmi_pll_pwr {
HDMI_PLLPWRCMD_ALLOFF = 0,
@@ -351,7 +352,8 @@
struct hdmi_phy_data {
void __iomem *base;
- int irq;
+ u8 lane_function[4];
+ u8 lane_polarity[4];
};
struct hdmi_core_data {
@@ -360,13 +362,13 @@
struct hdmi_core_infoframe_avi avi_cfg;
};
-static inline void hdmi_write_reg(void __iomem *base_addr, const u16 idx,
+static inline void hdmi_write_reg(void __iomem *base_addr, const u32 idx,
u32 val)
{
__raw_writel(val, base_addr + idx);
}
-static inline u32 hdmi_read_reg(void __iomem *base_addr, const u16 idx)
+static inline u32 hdmi_read_reg(void __iomem *base_addr, const u32 idx)
{
return __raw_readl(base_addr + idx);
}
@@ -417,18 +419,19 @@
int hdmi_pll_init(struct platform_device *pdev, struct hdmi_pll_data *pll);
/* HDMI PHY funcs */
-int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
- struct hdmi_config *cfg);
-void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp);
+int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg);
void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s);
int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy);
+int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes);
/* HDMI common funcs */
const struct hdmi_config *hdmi_default_timing(void);
const struct hdmi_config *hdmi_get_timings(int mode, int code);
struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing);
+int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
+ struct hdmi_phy_data *phy);
-#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts);
int hdmi_wp_audio_enable(struct hdmi_wp_data *wp, bool enable);
int hdmi_wp_audio_core_req_enable(struct hdmi_wp_data *wp, bool enable);
diff --git a/drivers/video/fbdev/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
index f5f7944..626aad2 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4.c
@@ -81,8 +81,40 @@
WARN_ON(r < 0 && r != -ENOSYS);
}
+static irqreturn_t hdmi_irq_handler(int irq, void *data)
+{
+ struct hdmi_wp_data *wp = data;
+ u32 irqstatus;
+
+ irqstatus = hdmi_wp_get_irqstatus(wp);
+ hdmi_wp_set_irqstatus(wp, irqstatus);
+
+ if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
+ irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+ /*
+ * If we get both connect and disconnect interrupts at the same
+ * time, turn off the PHY, clear interrupts, and restart, which
+ * raises connect interrupt if a cable is connected, or nothing
+ * if cable is not connected.
+ */
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
+
+ hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
+ HDMI_IRQ_LINK_DISCONNECT);
+
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+ } else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
+ } else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+ }
+
+ return IRQ_HANDLED;
+}
+
static int hdmi_init_regulator(void)
{
+ int r;
struct regulator *reg;
if (hdmi.vdda_hdmi_dac_reg != NULL)
@@ -96,6 +128,15 @@
return PTR_ERR(reg);
}
+ if (regulator_can_change_voltage(reg)) {
+ r = regulator_set_voltage(reg, 1800000, 1800000);
+ if (r) {
+ devm_regulator_put(reg);
+ DSSWARN("can't set the regulator voltage\n");
+ return r;
+ }
+ }
+
hdmi.vdda_hdmi_dac_reg = reg;
return 0;
@@ -140,11 +181,16 @@
struct omap_video_timings *p;
struct omap_overlay_manager *mgr = hdmi.output.manager;
unsigned long phy;
+ struct hdmi_wp_data *wp = &hdmi.wp;
r = hdmi_power_on_core(dssdev);
if (r)
return r;
+ /* disable and clear irqs */
+ hdmi_wp_clear_irqenable(wp, 0xffffffff);
+ hdmi_wp_set_irqstatus(wp, 0xffffffff);
+
p = &hdmi.cfg.timings;
DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
@@ -161,12 +207,16 @@
goto err_pll_enable;
}
- r = hdmi_phy_enable(&hdmi.phy, &hdmi.wp, &hdmi.cfg);
+ r = hdmi_phy_configure(&hdmi.phy, &hdmi.cfg);
if (r) {
- DSSDBG("Failed to start PHY\n");
- goto err_phy_enable;
+ DSSDBG("Failed to configure PHY\n");
+ goto err_phy_cfg;
}
+ r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+ if (r)
+ goto err_phy_pwr;
+
hdmi4_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
/* bypass TV gamma table */
@@ -183,13 +233,17 @@
if (r)
goto err_mgr_enable;
+ hdmi_wp_set_irqenable(wp,
+ HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
+
return 0;
err_mgr_enable:
hdmi_wp_video_stop(&hdmi.wp);
err_vid_enable:
- hdmi_phy_disable(&hdmi.phy, &hdmi.wp);
-err_phy_enable:
+err_phy_cfg:
+ hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+err_phy_pwr:
hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
err_pll_enable:
hdmi_power_off_core(dssdev);
@@ -200,10 +254,14 @@
{
struct omap_overlay_manager *mgr = hdmi.output.manager;
+ hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
+
dss_mgr_disable(mgr);
hdmi_wp_video_stop(&hdmi.wp);
- hdmi_phy_disable(&hdmi.phy, &hdmi.wp);
+
+ hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+
hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
hdmi_power_off_core(dssdev);
@@ -600,15 +658,44 @@
omapdss_unregister_output(out);
}
+static int hdmi_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *ep;
+ int r;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return 0;
+
+ r = hdmi_parse_lanes_of(pdev, ep, &hdmi.phy);
+ if (r)
+ goto err;
+
+ of_node_put(ep);
+ return 0;
+
+err:
+ of_node_put(ep);
+ return r;
+}
+
/* HDMI HW IP initialisation */
static int omapdss_hdmihw_probe(struct platform_device *pdev)
{
int r;
+ int irq;
hdmi.pdev = pdev;
mutex_init(&hdmi.lock);
+ if (pdev->dev.of_node) {
+ r = hdmi_probe_of(pdev);
+ if (r)
+ return r;
+ }
+
r = hdmi_wp_init(pdev, &hdmi.wp);
if (r)
return r;
@@ -631,6 +718,20 @@
return r;
}
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ DSSERR("platform_get_irq failed\n");
+ return -ENODEV;
+ }
+
+ r = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, hdmi_irq_handler,
+ IRQF_ONESHOT, "OMAP HDMI", &hdmi.wp);
+ if (r) {
+ DSSERR("HDMI IRQ request failed\n");
+ return r;
+ }
+
pm_runtime_enable(&pdev->dev);
hdmi_init_output(pdev);
diff --git a/drivers/video/fbdev/omap2/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
index 2eb04dc..8bde7b7 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
@@ -998,38 +998,20 @@
#endif
-#define CORE_OFFSET 0x400
-#define CORE_SIZE 0xc00
-
int hdmi4_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
{
struct resource *res;
- struct resource temp_res;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
if (!res) {
- DSSDBG("can't get CORE mem resource by name\n");
- /*
- * if hwmod/DT doesn't have the memory resource information
- * split into HDMI sub blocks by name, we try again by getting
- * the platform's first resource. this code will be removed when
- * the driver can get the mem resources by name
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DSSERR("can't get CORE mem resource\n");
- return -EINVAL;
- }
-
- temp_res.start = res->start + CORE_OFFSET;
- temp_res.end = temp_res.start + CORE_SIZE - 1;
- res = &temp_res;
+ DSSERR("can't get CORE mem resource\n");
+ return -EINVAL;
}
- core->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!core->base) {
+ core->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(core->base)) {
DSSERR("can't ioremap CORE\n");
- return -ENOMEM;
+ return PTR_ERR(core->base);
}
return 0;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5.c b/drivers/video/fbdev/omap2/dss/hdmi5.c
new file mode 100644
index 0000000..c468b9e
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi5.c
@@ -0,0 +1,829 @@
+/*
+ * HDMI driver for OMAP5
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors:
+ * Yong Zhi
+ * Mythri pk
+ * Archit Taneja <archit@ti.com>
+ * Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define DSS_SUBSYS_NAME "HDMI"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <video/omapdss.h>
+
+#include "hdmi5_core.h"
+#include "dss.h"
+#include "dss_features.h"
+
+static struct {
+ struct mutex lock;
+ struct platform_device *pdev;
+
+ struct hdmi_wp_data wp;
+ struct hdmi_pll_data pll;
+ struct hdmi_phy_data phy;
+ struct hdmi_core_data core;
+
+ struct hdmi_config cfg;
+
+ struct clk *sys_clk;
+ struct regulator *vdda_reg;
+
+ bool core_enabled;
+
+ struct omap_dss_device output;
+} hdmi;
+
+static int hdmi_runtime_get(void)
+{
+ int r;
+
+ DSSDBG("hdmi_runtime_get\n");
+
+ r = pm_runtime_get_sync(&hdmi.pdev->dev);
+ WARN_ON(r < 0);
+ if (r < 0)
+ return r;
+
+ return 0;
+}
+
+static void hdmi_runtime_put(void)
+{
+ int r;
+
+ DSSDBG("hdmi_runtime_put\n");
+
+ r = pm_runtime_put_sync(&hdmi.pdev->dev);
+ WARN_ON(r < 0 && r != -ENOSYS);
+}
+
+static irqreturn_t hdmi_irq_handler(int irq, void *data)
+{
+ struct hdmi_wp_data *wp = data;
+ u32 irqstatus;
+
+ irqstatus = hdmi_wp_get_irqstatus(wp);
+ hdmi_wp_set_irqstatus(wp, irqstatus);
+
+ if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
+ irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+ u32 v;
+ /*
+ * If we get both connect and disconnect interrupts at the same
+ * time, turn off the PHY, clear interrupts, and restart, which
+ * raises connect interrupt if a cable is connected, or nothing
+ * if cable is not connected.
+ */
+
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
+
+ /*
+ * We always get bogus CONNECT & DISCONNECT interrupts when
+ * setting the PHY to LDOON. To ignore those, we force the RXDET
+ * line to 0 until the PHY power state has been changed.
+ */
+ v = hdmi_read_reg(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL);
+ v = FLD_MOD(v, 1, 15, 15); /* FORCE_RXDET_HIGH */
+ v = FLD_MOD(v, 0, 14, 7); /* RXDET_LINE */
+ hdmi_write_reg(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL, v);
+
+ hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
+ HDMI_IRQ_LINK_DISCONNECT);
+
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+
+ REG_FLD_MOD(hdmi.phy.base, HDMI_TXPHY_PAD_CFG_CTRL, 0, 15, 15);
+
+ } else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
+ } else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
+ hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int hdmi_init_regulator(void)
+{
+ int r;
+ struct regulator *reg;
+
+ if (hdmi.vdda_reg != NULL)
+ return 0;
+
+ reg = devm_regulator_get(&hdmi.pdev->dev, "vdda");
+ if (IS_ERR(reg)) {
+ DSSERR("can't get VDDA regulator\n");
+ return PTR_ERR(reg);
+ }
+
+ if (regulator_can_change_voltage(reg)) {
+ r = regulator_set_voltage(reg, 1800000, 1800000);
+ if (r) {
+ devm_regulator_put(reg);
+ DSSWARN("can't set the regulator voltage\n");
+ return r;
+ }
+ }
+
+ hdmi.vdda_reg = reg;
+
+ return 0;
+}
+
+static int hdmi_power_on_core(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ r = regulator_enable(hdmi.vdda_reg);
+ if (r)
+ return r;
+
+ r = hdmi_runtime_get();
+ if (r)
+ goto err_runtime_get;
+
+ /* Make selection of HDMI in DSS */
+ dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK);
+
+ hdmi.core_enabled = true;
+
+ return 0;
+
+err_runtime_get:
+ regulator_disable(hdmi.vdda_reg);
+
+ return r;
+}
+
+static void hdmi_power_off_core(struct omap_dss_device *dssdev)
+{
+ hdmi.core_enabled = false;
+
+ hdmi_runtime_put();
+ regulator_disable(hdmi.vdda_reg);
+}
+
+static int hdmi_power_on_full(struct omap_dss_device *dssdev)
+{
+ int r;
+ struct omap_video_timings *p;
+ struct omap_overlay_manager *mgr = hdmi.output.manager;
+ unsigned long phy;
+
+ r = hdmi_power_on_core(dssdev);
+ if (r)
+ return r;
+
+ p = &hdmi.cfg.timings;
+
+ DSSDBG("hdmi_power_on x_res= %d y_res = %d\n", p->x_res, p->y_res);
+
+ /* the functions below use kHz pixel clock. TODO: change to Hz */
+ phy = p->pixelclock / 1000;
+
+ hdmi_pll_compute(&hdmi.pll, clk_get_rate(hdmi.sys_clk), phy);
+
+ /* disable and clear irqs */
+ hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
+ hdmi_wp_set_irqstatus(&hdmi.wp,
+ hdmi_wp_get_irqstatus(&hdmi.wp));
+
+ /* config the PLL and PHY hdmi_set_pll_pwrfirst */
+ r = hdmi_pll_enable(&hdmi.pll, &hdmi.wp);
+ if (r) {
+ DSSDBG("Failed to lock PLL\n");
+ goto err_pll_enable;
+ }
+
+ r = hdmi_phy_configure(&hdmi.phy, &hdmi.cfg);
+ if (r) {
+ DSSDBG("Failed to start PHY\n");
+ goto err_phy_cfg;
+ }
+
+ r = hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_LDOON);
+ if (r)
+ goto err_phy_pwr;
+
+ hdmi5_configure(&hdmi.core, &hdmi.wp, &hdmi.cfg);
+
+ /* bypass TV gamma table */
+ dispc_enable_gamma_table(0);
+
+ /* tv size */
+ dss_mgr_set_timings(mgr, p);
+
+ r = hdmi_wp_video_start(&hdmi.wp);
+ if (r)
+ goto err_vid_enable;
+
+ r = dss_mgr_enable(mgr);
+ if (r)
+ goto err_mgr_enable;
+
+ hdmi_wp_set_irqenable(&hdmi.wp,
+ HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
+
+ return 0;
+
+err_mgr_enable:
+ hdmi_wp_video_stop(&hdmi.wp);
+err_vid_enable:
+ hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+err_phy_pwr:
+err_phy_cfg:
+ hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
+err_pll_enable:
+ hdmi_power_off_core(dssdev);
+ return -EIO;
+}
+
+static void hdmi_power_off_full(struct omap_dss_device *dssdev)
+{
+ struct omap_overlay_manager *mgr = hdmi.output.manager;
+
+ hdmi_wp_clear_irqenable(&hdmi.wp, 0xffffffff);
+
+ dss_mgr_disable(mgr);
+
+ hdmi_wp_video_stop(&hdmi.wp);
+
+ hdmi_wp_set_phy_pwr(&hdmi.wp, HDMI_PHYPWRCMD_OFF);
+
+ hdmi_pll_disable(&hdmi.pll, &hdmi.wp);
+
+ hdmi_power_off_core(dssdev);
+}
+
+static int hdmi_display_check_timing(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct omap_dss_device *out = &hdmi.output;
+
+ if (!dispc_mgr_timings_ok(out->dispc_channel, timings))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void hdmi_display_set_timing(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ struct hdmi_cm cm;
+ const struct hdmi_config *t;
+
+ mutex_lock(&hdmi.lock);
+
+ cm = hdmi_get_code(timings);
+ hdmi.cfg.cm = cm;
+
+ t = hdmi_get_timings(cm.mode, cm.code);
+ if (t != NULL) {
+ hdmi.cfg = *t;
+
+ dispc_set_tv_pclk(t->timings.pixelclock);
+ } else {
+ hdmi.cfg.timings = *timings;
+ hdmi.cfg.cm.code = 0;
+ hdmi.cfg.cm.mode = HDMI_DVI;
+
+ dispc_set_tv_pclk(timings->pixelclock);
+ }
+
+ DSSDBG("using mode: %s, code %d\n", hdmi.cfg.cm.mode == HDMI_DVI ?
+ "DVI" : "HDMI", hdmi.cfg.cm.code);
+
+ mutex_unlock(&hdmi.lock);
+}
+
+static void hdmi_display_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ const struct hdmi_config *cfg;
+ struct hdmi_cm cm = hdmi.cfg.cm;
+
+ cfg = hdmi_get_timings(cm.mode, cm.code);
+ if (cfg == NULL)
+ cfg = hdmi_default_timing();
+
+ memcpy(timings, &cfg->timings, sizeof(cfg->timings));
+}
+
+static void hdmi_dump_regs(struct seq_file *s)
+{
+ mutex_lock(&hdmi.lock);
+
+ if (hdmi_runtime_get()) {
+ mutex_unlock(&hdmi.lock);
+ return;
+ }
+
+ hdmi_wp_dump(&hdmi.wp, s);
+ hdmi_pll_dump(&hdmi.pll, s);
+ hdmi_phy_dump(&hdmi.phy, s);
+ hdmi5_core_dump(&hdmi.core, s);
+
+ hdmi_runtime_put();
+ mutex_unlock(&hdmi.lock);
+}
+
+static int read_edid(u8 *buf, int len)
+{
+ int r;
+ int idlemode;
+
+ mutex_lock(&hdmi.lock);
+
+ r = hdmi_runtime_get();
+ BUG_ON(r);
+
+ idlemode = REG_GET(hdmi.wp.base, HDMI_WP_SYSCONFIG, 3, 2);
+ /* No-idle mode */
+ REG_FLD_MOD(hdmi.wp.base, HDMI_WP_SYSCONFIG, 1, 3, 2);
+
+ r = hdmi5_read_edid(&hdmi.core, buf, len);
+
+ REG_FLD_MOD(hdmi.wp.base, HDMI_WP_SYSCONFIG, idlemode, 3, 2);
+
+ hdmi_runtime_put();
+ mutex_unlock(&hdmi.lock);
+
+ return r;
+}
+
+static int hdmi_display_enable(struct omap_dss_device *dssdev)
+{
+ struct omap_dss_device *out = &hdmi.output;
+ int r = 0;
+
+ DSSDBG("ENTER hdmi_display_enable\n");
+
+ mutex_lock(&hdmi.lock);
+
+ if (out == NULL || out->manager == NULL) {
+ DSSERR("failed to enable display: no output/manager\n");
+ r = -ENODEV;
+ goto err0;
+ }
+
+ r = hdmi_power_on_full(dssdev);
+ if (r) {
+ DSSERR("failed to power on device\n");
+ goto err0;
+ }
+
+ mutex_unlock(&hdmi.lock);
+ return 0;
+
+err0:
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+
+static void hdmi_display_disable(struct omap_dss_device *dssdev)
+{
+ DSSDBG("Enter hdmi_display_disable\n");
+
+ mutex_lock(&hdmi.lock);
+
+ hdmi_power_off_full(dssdev);
+
+ mutex_unlock(&hdmi.lock);
+}
+
+static int hdmi_core_enable(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+
+ DSSDBG("ENTER omapdss_hdmi_core_enable\n");
+
+ mutex_lock(&hdmi.lock);
+
+ r = hdmi_power_on_core(dssdev);
+ if (r) {
+ DSSERR("failed to power on device\n");
+ goto err0;
+ }
+
+ mutex_unlock(&hdmi.lock);
+ return 0;
+
+err0:
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+
+static void hdmi_core_disable(struct omap_dss_device *dssdev)
+{
+ DSSDBG("Enter omapdss_hdmi_core_disable\n");
+
+ mutex_lock(&hdmi.lock);
+
+ hdmi_power_off_core(dssdev);
+
+ mutex_unlock(&hdmi.lock);
+}
+
+static int hdmi_get_clocks(struct platform_device *pdev)
+{
+ struct clk *clk;
+
+ clk = devm_clk_get(&pdev->dev, "sys_clk");
+ if (IS_ERR(clk)) {
+ DSSERR("can't get sys_clk\n");
+ return PTR_ERR(clk);
+ }
+
+ hdmi.sys_clk = clk;
+
+ return 0;
+}
+
+static int hdmi_connect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ struct omap_overlay_manager *mgr;
+ int r;
+
+ r = hdmi_init_regulator();
+ if (r)
+ return r;
+
+ mgr = omap_dss_get_overlay_manager(dssdev->dispc_channel);
+ if (!mgr)
+ return -ENODEV;
+
+ r = dss_mgr_connect(mgr, dssdev);
+ if (r)
+ return r;
+
+ r = omapdss_output_set_device(dssdev, dst);
+ if (r) {
+ DSSERR("failed to connect output to new device: %s\n",
+ dst->name);
+ dss_mgr_disconnect(mgr, dssdev);
+ return r;
+ }
+
+ return 0;
+}
+
+static void hdmi_disconnect(struct omap_dss_device *dssdev,
+ struct omap_dss_device *dst)
+{
+ WARN_ON(dst != dssdev->dst);
+
+ if (dst != dssdev->dst)
+ return;
+
+ omapdss_output_unset_device(dssdev);
+
+ if (dssdev->manager)
+ dss_mgr_disconnect(dssdev->manager, dssdev);
+}
+
+static int hdmi_read_edid(struct omap_dss_device *dssdev,
+ u8 *edid, int len)
+{
+ bool need_enable;
+ int r;
+
+ need_enable = hdmi.core_enabled == false;
+
+ if (need_enable) {
+ r = hdmi_core_enable(dssdev);
+ if (r)
+ return r;
+ }
+
+ r = read_edid(edid, len);
+
+ if (need_enable)
+ hdmi_core_disable(dssdev);
+
+ return r;
+}
+
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+static int hdmi_audio_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ mutex_lock(&hdmi.lock);
+
+ if (!hdmi_mode_has_audio(hdmi.cfg.cm.mode)) {
+ r = -EPERM;
+ goto err;
+ }
+
+ r = hdmi_wp_audio_enable(&hdmi.wp, true);
+ if (r)
+ goto err;
+
+ mutex_unlock(&hdmi.lock);
+ return 0;
+
+err:
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+
+static void hdmi_audio_disable(struct omap_dss_device *dssdev)
+{
+ hdmi_wp_audio_enable(&hdmi.wp, false);
+}
+
+static int hdmi_audio_start(struct omap_dss_device *dssdev)
+{
+ return hdmi_wp_audio_core_req_enable(&hdmi.wp, true);
+}
+
+static void hdmi_audio_stop(struct omap_dss_device *dssdev)
+{
+ hdmi_wp_audio_core_req_enable(&hdmi.wp, false);
+}
+
+static bool hdmi_audio_supported(struct omap_dss_device *dssdev)
+{
+ bool r;
+
+ mutex_lock(&hdmi.lock);
+
+ r = hdmi_mode_has_audio(hdmi.cfg.cm.mode);
+
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+
+static int hdmi_audio_config(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio)
+{
+ int r;
+ u32 pclk = hdmi.cfg.timings.pixelclock;
+
+ mutex_lock(&hdmi.lock);
+
+ if (!hdmi_mode_has_audio(hdmi.cfg.cm.mode)) {
+ r = -EPERM;
+ goto err;
+ }
+
+ r = hdmi5_audio_config(&hdmi.core, &hdmi.wp, audio, pclk);
+ if (r)
+ goto err;
+
+ mutex_unlock(&hdmi.lock);
+ return 0;
+
+err:
+ mutex_unlock(&hdmi.lock);
+ return r;
+}
+#else
+static int hdmi_audio_enable(struct omap_dss_device *dssdev)
+{
+ return -EPERM;
+}
+
+static void hdmi_audio_disable(struct omap_dss_device *dssdev)
+{
+}
+
+static int hdmi_audio_start(struct omap_dss_device *dssdev)
+{
+ return -EPERM;
+}
+
+static void hdmi_audio_stop(struct omap_dss_device *dssdev)
+{
+}
+
+static bool hdmi_audio_supported(struct omap_dss_device *dssdev)
+{
+ return false;
+}
+
+static int hdmi_audio_config(struct omap_dss_device *dssdev,
+ struct omap_dss_audio *audio)
+{
+ return -EPERM;
+}
+#endif
+
+static const struct omapdss_hdmi_ops hdmi_ops = {
+ .connect = hdmi_connect,
+ .disconnect = hdmi_disconnect,
+
+ .enable = hdmi_display_enable,
+ .disable = hdmi_display_disable,
+
+ .check_timings = hdmi_display_check_timing,
+ .set_timings = hdmi_display_set_timing,
+ .get_timings = hdmi_display_get_timings,
+
+ .read_edid = hdmi_read_edid,
+
+ .audio_enable = hdmi_audio_enable,
+ .audio_disable = hdmi_audio_disable,
+ .audio_start = hdmi_audio_start,
+ .audio_stop = hdmi_audio_stop,
+ .audio_supported = hdmi_audio_supported,
+ .audio_config = hdmi_audio_config,
+};
+
+static void hdmi_init_output(struct platform_device *pdev)
+{
+ struct omap_dss_device *out = &hdmi.output;
+
+ out->dev = &pdev->dev;
+ out->id = OMAP_DSS_OUTPUT_HDMI;
+ out->output_type = OMAP_DISPLAY_TYPE_HDMI;
+ out->name = "hdmi.0";
+ out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
+ out->ops.hdmi = &hdmi_ops;
+ out->owner = THIS_MODULE;
+
+ omapdss_register_output(out);
+}
+
+static void __exit hdmi_uninit_output(struct platform_device *pdev)
+{
+ struct omap_dss_device *out = &hdmi.output;
+
+ omapdss_unregister_output(out);
+}
+
+static int hdmi_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *ep;
+ int r;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return 0;
+
+ r = hdmi_parse_lanes_of(pdev, ep, &hdmi.phy);
+ if (r)
+ goto err;
+
+ of_node_put(ep);
+ return 0;
+
+err:
+ of_node_put(ep);
+ return r;
+}
+
+/* HDMI HW IP initialisation */
+static int omapdss_hdmihw_probe(struct platform_device *pdev)
+{
+ int r;
+ int irq;
+
+ hdmi.pdev = pdev;
+
+ mutex_init(&hdmi.lock);
+
+ if (pdev->dev.of_node) {
+ r = hdmi_probe_of(pdev);
+ if (r)
+ return r;
+ }
+
+ r = hdmi_wp_init(pdev, &hdmi.wp);
+ if (r)
+ return r;
+
+ r = hdmi_pll_init(pdev, &hdmi.pll);
+ if (r)
+ return r;
+
+ r = hdmi_phy_init(pdev, &hdmi.phy);
+ if (r)
+ return r;
+
+ r = hdmi5_core_init(pdev, &hdmi.core);
+ if (r)
+ return r;
+
+ r = hdmi_get_clocks(pdev);
+ if (r) {
+ DSSERR("can't get clocks\n");
+ return r;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ DSSERR("platform_get_irq failed\n");
+ return -ENODEV;
+ }
+
+ r = devm_request_threaded_irq(&pdev->dev, irq,
+ NULL, hdmi_irq_handler,
+ IRQF_ONESHOT, "OMAP HDMI", &hdmi.wp);
+ if (r) {
+ DSSERR("HDMI IRQ request failed\n");
+ return r;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+
+ hdmi_init_output(pdev);
+
+ dss_debugfs_create_file("hdmi", hdmi_dump_regs);
+
+ return 0;
+}
+
+static int __exit omapdss_hdmihw_remove(struct platform_device *pdev)
+{
+ hdmi_uninit_output(pdev);
+
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static int hdmi_runtime_suspend(struct device *dev)
+{
+ clk_disable_unprepare(hdmi.sys_clk);
+
+ dispc_runtime_put();
+
+ return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+ int r;
+
+ r = dispc_runtime_get();
+ if (r < 0)
+ return r;
+
+ clk_prepare_enable(hdmi.sys_clk);
+
+ return 0;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+ .runtime_suspend = hdmi_runtime_suspend,
+ .runtime_resume = hdmi_runtime_resume,
+};
+
+static const struct of_device_id hdmi_of_match[] = {
+ { .compatible = "ti,omap5-hdmi", },
+ {},
+};
+
+static struct platform_driver omapdss_hdmihw_driver = {
+ .probe = omapdss_hdmihw_probe,
+ .remove = __exit_p(omapdss_hdmihw_remove),
+ .driver = {
+ .name = "omapdss_hdmi5",
+ .owner = THIS_MODULE,
+ .pm = &hdmi_pm_ops,
+ .of_match_table = hdmi_of_match,
+ },
+};
+
+int __init hdmi5_init_platform_driver(void)
+{
+ return platform_driver_register(&omapdss_hdmihw_driver);
+}
+
+void __exit hdmi5_uninit_platform_driver(void)
+{
+ platform_driver_unregister(&omapdss_hdmihw_driver);
+}
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5_core.c b/drivers/video/fbdev/omap2/dss/hdmi5_core.c
new file mode 100644
index 0000000..7528c7a
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi5_core.c
@@ -0,0 +1,922 @@
+/*
+ * OMAP5 HDMI CORE IP driver library
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ *
+ * Authors:
+ * Yong Zhi
+ * Mythri pk
+ * Archit Taneja <archit@ti.com>
+ * Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <drm/drm_edid.h>
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+#include <sound/asound.h>
+#include <sound/asoundef.h>
+#endif
+
+#include "hdmi5_core.h"
+
+/* only 24 bit color depth used for now */
+static const struct csc_table csc_table_deepcolor[] = {
+ /* HDMI_DEEP_COLOR_24BIT */
+ [0] = { 7036, 0, 0, 32, 0, 7036, 0, 32, 0, 0, 7036, 32, },
+ /* HDMI_DEEP_COLOR_30BIT */
+ [1] = { 7015, 0, 0, 128, 0, 7015, 0, 128, 0, 0, 7015, 128, },
+ /* HDMI_DEEP_COLOR_36BIT */
+ [2] = { 7010, 0, 0, 512, 0, 7010, 0, 512, 0, 0, 7010, 512, },
+ /* FULL RANGE */
+ [3] = { 8192, 0, 0, 0, 0, 8192, 0, 0, 0, 0, 8192, 0, },
+};
+
+static void hdmi_core_ddc_init(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+ const unsigned long long iclk = 266000000; /* DSS L3 ICLK */
+ const unsigned ss_scl_high = 4000; /* ns */
+ const unsigned ss_scl_low = 4700; /* ns */
+ const unsigned fs_scl_high = 600; /* ns */
+ const unsigned fs_scl_low = 1300; /* ns */
+ const unsigned sda_hold = 300; /* ns */
+ const unsigned sfr_div = 10;
+ unsigned long long sfr;
+ unsigned v;
+
+ sfr = iclk / sfr_div; /* SFR_DIV */
+ sfr /= 1000; /* SFR clock in kHz */
+
+ /* Reset */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SOFTRSTZ, 0, 0, 0);
+ if (hdmi_wait_for_bit_change(base, HDMI_CORE_I2CM_SOFTRSTZ,
+ 0, 0, 1) != 1)
+ DSSERR("HDMI I2CM reset failed\n");
+
+ /* Standard (0) or Fast (1) Mode */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_DIV, 0, 3, 3);
+
+ /* Standard Mode SCL High counter */
+ v = DIV_ROUND_UP_ULL(ss_scl_high * sfr, 1000000);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR,
+ (v >> 8) & 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR,
+ v & 0xff, 7, 0);
+
+ /* Standard Mode SCL Low counter */
+ v = DIV_ROUND_UP_ULL(ss_scl_low * sfr, 1000000);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR,
+ (v >> 8) & 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR,
+ v & 0xff, 7, 0);
+
+ /* Fast Mode SCL High Counter */
+ v = DIV_ROUND_UP_ULL(fs_scl_high * sfr, 1000000);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR,
+ (v >> 8) & 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR,
+ v & 0xff, 7, 0);
+
+ /* Fast Mode SCL Low Counter */
+ v = DIV_ROUND_UP_ULL(fs_scl_low * sfr, 1000000);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR,
+ (v >> 8) & 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR,
+ v & 0xff, 7, 0);
+
+ /* SDA Hold Time */
+ v = DIV_ROUND_UP_ULL(sda_hold * sfr, 1000000);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SDA_HOLD_ADDR, v & 0xff, 7, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SLAVE, 0x50, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGADDR, 0x30, 6, 0);
+
+ /* NACK_POL to high */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 7, 7);
+
+ /* NACK_MASK to unmasked */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x0, 6, 6);
+
+ /* ARBITRATION_POL to high */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 3, 3);
+
+ /* ARBITRATION_MASK to unmasked */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x0, 2, 2);
+
+ /* DONE_POL to high */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 3, 3);
+
+ /* DONE_MASK to unmasked */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x0, 2, 2);
+}
+
+static void hdmi_core_ddc_uninit(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+
+ /* Mask I2C interrupts */
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
+}
+
+static int hdmi_core_ddc_edid(struct hdmi_core_data *core, u8 *pedid, u8 ext)
+{
+ void __iomem *base = core->base;
+ u8 cur_addr;
+ char checksum = 0;
+ const int retries = 1000;
+ u8 seg_ptr = ext / 2;
+ u8 edidbase = ((ext % 2) * 0x80);
+
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_SEGPTR, seg_ptr, 7, 0);
+
+ /*
+ * TODO: We use polling here, although we probably should use proper
+ * interrupts.
+ */
+ for (cur_addr = 0; cur_addr < 128; ++cur_addr) {
+ int i;
+
+ /* clear ERROR and DONE */
+ REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_ADDRESS,
+ edidbase + cur_addr, 7, 0);
+
+ if (seg_ptr)
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_OPERATION, 1, 1, 1);
+ else
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_OPERATION, 1, 0, 0);
+
+ for (i = 0; i < retries; ++i) {
+ u32 stat;
+
+ stat = REG_GET(base, HDMI_CORE_IH_I2CM_STAT0, 1, 0);
+
+ /* I2CM_ERROR */
+ if (stat & 1) {
+ DSSERR("HDMI I2C Master Error\n");
+ return -EIO;
+ }
+
+ /* I2CM_DONE */
+ if (stat & (1 << 1))
+ break;
+
+ usleep_range(250, 1000);
+ }
+
+ if (i == retries) {
+ DSSERR("HDMI I2C timeout reading EDID\n");
+ return -EIO;
+ }
+
+ pedid[cur_addr] = REG_GET(base, HDMI_CORE_I2CM_DATAI, 7, 0);
+ checksum += pedid[cur_addr];
+ }
+
+ return 0;
+
+}
+
+int hdmi5_read_edid(struct hdmi_core_data *core, u8 *edid, int len)
+{
+ int r, n, i;
+ int max_ext_blocks = (len / 128) - 1;
+
+ if (len < 128)
+ return -EINVAL;
+
+ hdmi_core_ddc_init(core);
+
+ r = hdmi_core_ddc_edid(core, edid, 0);
+ if (r)
+ goto out;
+
+ n = edid[0x7e];
+
+ if (n > max_ext_blocks)
+ n = max_ext_blocks;
+
+ for (i = 1; i <= n; i++) {
+ r = hdmi_core_ddc_edid(core, edid + i * EDID_LENGTH, i);
+ if (r)
+ goto out;
+ }
+
+out:
+ hdmi_core_ddc_uninit(core);
+
+ return r ? r : len;
+}
+
+void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s)
+{
+
+#define DUMPCORE(r) seq_printf(s, "%-35s %08x\n", #r,\
+ hdmi_read_reg(core->base, r))
+
+ DUMPCORE(HDMI_CORE_FC_INVIDCONF);
+ DUMPCORE(HDMI_CORE_FC_INHACTIV0);
+ DUMPCORE(HDMI_CORE_FC_INHACTIV1);
+ DUMPCORE(HDMI_CORE_FC_INHBLANK0);
+ DUMPCORE(HDMI_CORE_FC_INHBLANK1);
+ DUMPCORE(HDMI_CORE_FC_INVACTIV0);
+ DUMPCORE(HDMI_CORE_FC_INVACTIV1);
+ DUMPCORE(HDMI_CORE_FC_INVBLANK);
+ DUMPCORE(HDMI_CORE_FC_HSYNCINDELAY0);
+ DUMPCORE(HDMI_CORE_FC_HSYNCINDELAY1);
+ DUMPCORE(HDMI_CORE_FC_HSYNCINWIDTH0);
+ DUMPCORE(HDMI_CORE_FC_HSYNCINWIDTH1);
+ DUMPCORE(HDMI_CORE_FC_VSYNCINDELAY);
+ DUMPCORE(HDMI_CORE_FC_VSYNCINWIDTH);
+ DUMPCORE(HDMI_CORE_FC_CTRLDUR);
+ DUMPCORE(HDMI_CORE_FC_EXCTRLDUR);
+ DUMPCORE(HDMI_CORE_FC_EXCTRLSPAC);
+ DUMPCORE(HDMI_CORE_FC_CH0PREAM);
+ DUMPCORE(HDMI_CORE_FC_CH1PREAM);
+ DUMPCORE(HDMI_CORE_FC_CH2PREAM);
+ DUMPCORE(HDMI_CORE_FC_AVICONF0);
+ DUMPCORE(HDMI_CORE_FC_AVICONF1);
+ DUMPCORE(HDMI_CORE_FC_AVICONF2);
+ DUMPCORE(HDMI_CORE_FC_AVIVID);
+ DUMPCORE(HDMI_CORE_FC_PRCONF);
+
+ DUMPCORE(HDMI_CORE_MC_CLKDIS);
+ DUMPCORE(HDMI_CORE_MC_SWRSTZREQ);
+ DUMPCORE(HDMI_CORE_MC_FLOWCTRL);
+ DUMPCORE(HDMI_CORE_MC_PHYRSTZ);
+ DUMPCORE(HDMI_CORE_MC_LOCKONCLOCK);
+
+ DUMPCORE(HDMI_CORE_I2CM_SLAVE);
+ DUMPCORE(HDMI_CORE_I2CM_ADDRESS);
+ DUMPCORE(HDMI_CORE_I2CM_DATAO);
+ DUMPCORE(HDMI_CORE_I2CM_DATAI);
+ DUMPCORE(HDMI_CORE_I2CM_OPERATION);
+ DUMPCORE(HDMI_CORE_I2CM_INT);
+ DUMPCORE(HDMI_CORE_I2CM_CTLINT);
+ DUMPCORE(HDMI_CORE_I2CM_DIV);
+ DUMPCORE(HDMI_CORE_I2CM_SEGADDR);
+ DUMPCORE(HDMI_CORE_I2CM_SOFTRSTZ);
+ DUMPCORE(HDMI_CORE_I2CM_SEGPTR);
+ DUMPCORE(HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR);
+ DUMPCORE(HDMI_CORE_I2CM_SDA_HOLD_ADDR);
+}
+
+static void hdmi_core_init(struct hdmi_core_vid_config *video_cfg,
+ struct hdmi_core_infoframe_avi *avi_cfg,
+ struct hdmi_config *cfg)
+{
+ DSSDBG("hdmi_core_init\n");
+
+ /* video core */
+ video_cfg->data_enable_pol = 1; /* It is always 1*/
+ video_cfg->v_fc_config.timings.hsync_level = cfg->timings.hsync_level;
+ video_cfg->v_fc_config.timings.x_res = cfg->timings.x_res;
+ video_cfg->v_fc_config.timings.hsw = cfg->timings.hsw - 1;
+ video_cfg->v_fc_config.timings.hbp = cfg->timings.hbp;
+ video_cfg->v_fc_config.timings.hfp = cfg->timings.hfp;
+ video_cfg->hblank = cfg->timings.hfp +
+ cfg->timings.hbp + cfg->timings.hsw - 1;
+ video_cfg->v_fc_config.timings.vsync_level = cfg->timings.vsync_level;
+ video_cfg->v_fc_config.timings.y_res = cfg->timings.y_res;
+ video_cfg->v_fc_config.timings.vsw = cfg->timings.vsw;
+ video_cfg->v_fc_config.timings.vfp = cfg->timings.vfp;
+ video_cfg->v_fc_config.timings.vbp = cfg->timings.vbp;
+ video_cfg->vblank_osc = 0; /* Always 0 - need to confirm */
+ video_cfg->vblank = cfg->timings.vsw +
+ cfg->timings.vfp + cfg->timings.vbp;
+ video_cfg->v_fc_config.cm.mode = cfg->cm.mode;
+ video_cfg->v_fc_config.timings.interlace = cfg->timings.interlace;
+
+ /* info frame */
+ avi_cfg->db1_format = 0;
+ avi_cfg->db1_active_info = 0;
+ avi_cfg->db1_bar_info_dv = 0;
+ avi_cfg->db1_scan_info = 0;
+ avi_cfg->db2_colorimetry = 0;
+ avi_cfg->db2_aspect_ratio = 0;
+ avi_cfg->db2_active_fmt_ar = 0;
+ avi_cfg->db3_itc = 0;
+ avi_cfg->db3_ec = 0;
+ avi_cfg->db3_q_range = 0;
+ avi_cfg->db3_nup_scaling = 0;
+ avi_cfg->db4_videocode = 0;
+ avi_cfg->db5_pixel_repeat = 0;
+ avi_cfg->db6_7_line_eoftop = 0;
+ avi_cfg->db8_9_line_sofbottom = 0;
+ avi_cfg->db10_11_pixel_eofleft = 0;
+ avi_cfg->db12_13_pixel_sofright = 0;
+}
+
+/* DSS_HDMI_CORE_VIDEO_CONFIG */
+static void hdmi_core_video_config(struct hdmi_core_data *core,
+ struct hdmi_core_vid_config *cfg)
+{
+ void __iomem *base = core->base;
+ unsigned char r = 0;
+ bool vsync_pol, hsync_pol;
+
+ vsync_pol =
+ cfg->v_fc_config.timings.vsync_level == OMAPDSS_SIG_ACTIVE_HIGH;
+ hsync_pol =
+ cfg->v_fc_config.timings.hsync_level == OMAPDSS_SIG_ACTIVE_HIGH;
+
+ /* Set hsync, vsync and data-enable polarity */
+ r = hdmi_read_reg(base, HDMI_CORE_FC_INVIDCONF);
+ r = FLD_MOD(r, vsync_pol, 6, 6);
+ r = FLD_MOD(r, hsync_pol, 5, 5);
+ r = FLD_MOD(r, cfg->data_enable_pol, 4, 4);
+ r = FLD_MOD(r, cfg->vblank_osc, 1, 1);
+ r = FLD_MOD(r, cfg->v_fc_config.timings.interlace, 0, 0);
+ hdmi_write_reg(base, HDMI_CORE_FC_INVIDCONF, r);
+
+ /* set x resolution */
+ REG_FLD_MOD(base, HDMI_CORE_FC_INHACTIV1,
+ cfg->v_fc_config.timings.x_res >> 8, 4, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_INHACTIV0,
+ cfg->v_fc_config.timings.x_res & 0xFF, 7, 0);
+
+ /* set y resolution */
+ REG_FLD_MOD(base, HDMI_CORE_FC_INVACTIV1,
+ cfg->v_fc_config.timings.y_res >> 8, 4, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_INVACTIV0,
+ cfg->v_fc_config.timings.y_res & 0xFF, 7, 0);
+
+ /* set horizontal blanking pixels */
+ REG_FLD_MOD(base, HDMI_CORE_FC_INHBLANK1, cfg->hblank >> 8, 4, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_INHBLANK0, cfg->hblank & 0xFF, 7, 0);
+
+ /* set vertial blanking pixels */
+ REG_FLD_MOD(base, HDMI_CORE_FC_INVBLANK, cfg->vblank, 7, 0);
+
+ /* set horizontal sync offset */
+ REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINDELAY1,
+ cfg->v_fc_config.timings.hfp >> 8, 4, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINDELAY0,
+ cfg->v_fc_config.timings.hfp & 0xFF, 7, 0);
+
+ /* set vertical sync offset */
+ REG_FLD_MOD(base, HDMI_CORE_FC_VSYNCINDELAY,
+ cfg->v_fc_config.timings.vfp, 7, 0);
+
+ /* set horizontal sync pulse width */
+ REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINWIDTH1,
+ (cfg->v_fc_config.timings.hsw >> 8), 1, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_HSYNCINWIDTH0,
+ cfg->v_fc_config.timings.hsw & 0xFF, 7, 0);
+
+ /* set vertical sync pulse width */
+ REG_FLD_MOD(base, HDMI_CORE_FC_VSYNCINWIDTH,
+ cfg->v_fc_config.timings.vsw, 5, 0);
+
+ /* select DVI mode */
+ REG_FLD_MOD(base, HDMI_CORE_FC_INVIDCONF,
+ cfg->v_fc_config.cm.mode, 3, 3);
+}
+
+static void hdmi_core_config_video_packetizer(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+ int clr_depth = 0; /* 24 bit color depth */
+
+ /* COLOR_DEPTH */
+ REG_FLD_MOD(base, HDMI_CORE_VP_PR_CD, clr_depth, 7, 4);
+ /* BYPASS_EN */
+ REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 0 : 1, 6, 6);
+ /* PP_EN */
+ REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 1 : 0, 5, 5);
+ /* YCC422_EN */
+ REG_FLD_MOD(base, HDMI_CORE_VP_CONF, 0, 3, 3);
+ /* PP_STUFFING */
+ REG_FLD_MOD(base, HDMI_CORE_VP_STUFF, clr_depth ? 1 : 0, 1, 1);
+ /* YCC422_STUFFING */
+ REG_FLD_MOD(base, HDMI_CORE_VP_STUFF, 1, 2, 2);
+ /* OUTPUT_SELECTOR */
+ REG_FLD_MOD(base, HDMI_CORE_VP_CONF, clr_depth ? 0 : 2, 1, 0);
+}
+
+static void hdmi_core_config_csc(struct hdmi_core_data *core)
+{
+ int clr_depth = 0; /* 24 bit color depth */
+
+ /* CSC_COLORDEPTH */
+ REG_FLD_MOD(core->base, HDMI_CORE_CSC_SCALE, clr_depth, 7, 4);
+}
+
+static void hdmi_core_config_video_sampler(struct hdmi_core_data *core)
+{
+ int video_mapping = 1; /* for 24 bit color depth */
+
+ /* VIDEO_MAPPING */
+ REG_FLD_MOD(core->base, HDMI_CORE_TX_INVID0, video_mapping, 4, 0);
+}
+
+static void hdmi_core_aux_infoframe_avi_config(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+ struct hdmi_core_infoframe_avi avi = core->avi_cfg;
+
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_format, 1, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_active_info, 6, 6);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_bar_info_dv, 3, 2);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF0, avi.db1_scan_info, 5, 4);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF1, avi.db2_colorimetry, 7, 6);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF1, avi.db2_aspect_ratio, 5, 4);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF1, avi.db2_active_fmt_ar, 3, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_itc, 7, 7);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_ec, 6, 4);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_q_range, 3, 2);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVICONF2, avi.db3_nup_scaling, 1, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AVIVID, avi.db4_videocode, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_PRCONF, avi.db5_pixel_repeat, 3, 0);
+}
+
+static void hdmi_core_csc_config(struct hdmi_core_data *core,
+ struct csc_table csc_coeff)
+{
+ void __iomem *base = core->base;
+
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A1_MSB, csc_coeff.a1 >> 8 , 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A1_LSB, csc_coeff.a1, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A2_MSB, csc_coeff.a2 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A2_LSB, csc_coeff.a2, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A3_MSB, csc_coeff.a3 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A3_LSB, csc_coeff.a3, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A4_MSB, csc_coeff.a4 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_A4_LSB, csc_coeff.a4, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B1_MSB, csc_coeff.b1 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B1_LSB, csc_coeff.b1, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B2_MSB, csc_coeff.b2 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B2_LSB, csc_coeff.b2, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B3_MSB, csc_coeff.b3 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B3_LSB, csc_coeff.b3, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B4_MSB, csc_coeff.b4 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_B4_LSB, csc_coeff.b4, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C1_MSB, csc_coeff.c1 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C1_LSB, csc_coeff.c1, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C2_MSB, csc_coeff.c2 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C2_LSB, csc_coeff.c2, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C3_MSB, csc_coeff.c3 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C3_LSB, csc_coeff.c3, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C4_MSB, csc_coeff.c4 >> 8, 6, 0);
+ REG_FLD_MOD(base, HDMI_CORE_CSC_COEF_C4_LSB, csc_coeff.c4, 7, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_MC_FLOWCTRL, 0x1, 0, 0);
+}
+
+static void hdmi_core_configure_range(struct hdmi_core_data *core)
+{
+ struct csc_table csc_coeff = { 0 };
+
+ /* support limited range with 24 bit color depth for now */
+ csc_coeff = csc_table_deepcolor[0];
+ core->avi_cfg.db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_LR;
+
+ hdmi_core_csc_config(core, csc_coeff);
+ hdmi_core_aux_infoframe_avi_config(core);
+}
+
+static void hdmi_core_enable_video_path(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+
+ DSSDBG("hdmi_core_enable_video_path\n");
+
+ REG_FLD_MOD(base, HDMI_CORE_FC_CTRLDUR, 0x0C, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_EXCTRLDUR, 0x20, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_EXCTRLSPAC, 0x01, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_CH0PREAM, 0x0B, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_CH1PREAM, 0x16, 5, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_CH2PREAM, 0x21, 5, 0);
+ REG_FLD_MOD(base, HDMI_CORE_MC_CLKDIS, 0x00, 0, 0);
+ REG_FLD_MOD(base, HDMI_CORE_MC_CLKDIS, 0x00, 1, 1);
+}
+
+static void hdmi_core_mask_interrupts(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+
+ /* Master IRQ mask */
+ REG_FLD_MOD(base, HDMI_CORE_IH_MUTE, 0x3, 1, 0);
+
+ /* Mask all the interrupts in HDMI core */
+
+ REG_FLD_MOD(base, HDMI_CORE_VP_MASK, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_MASK0, 0xe7, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_MASK1, 0xfb, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_MASK2, 0x3, 1, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 0x3, 3, 2);
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 0x3, 1, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_CEC_MASK, 0x7f, 6, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
+ REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
+
+ REG_FLD_MOD(base, HDMI_CORE_PHY_MASK0, 0xf3, 7, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+
+ /* Clear all the current interrupt bits */
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xe7, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xfb, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0x3, 1, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0x7, 2, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0x7f, 6, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+}
+
+static void hdmi_core_enable_interrupts(struct hdmi_core_data *core)
+{
+ /* Unmute interrupts */
+ REG_FLD_MOD(core->base, HDMI_CORE_IH_MUTE, 0x0, 1, 0);
+}
+
+int hdmi5_core_handle_irqs(struct hdmi_core_data *core)
+{
+ void __iomem *base = core->base;
+
+ REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_IH_I2CMPHY_STAT0, 0xff, 7, 0);
+
+ return 0;
+}
+
+void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+ struct hdmi_config *cfg)
+{
+ struct omap_video_timings video_timing;
+ struct hdmi_video_format video_format;
+ struct hdmi_core_vid_config v_core_cfg;
+ struct hdmi_core_infoframe_avi *avi_cfg = &core->avi_cfg;
+
+ hdmi_core_mask_interrupts(core);
+
+ hdmi_core_init(&v_core_cfg, avi_cfg, cfg);
+
+ hdmi_wp_init_vid_fmt_timings(&video_format, &video_timing, cfg);
+
+ hdmi_wp_video_config_timing(wp, &video_timing);
+
+ /* video config */
+ video_format.packing_mode = HDMI_PACK_24b_RGB_YUV444_YUV422;
+
+ hdmi_wp_video_config_format(wp, &video_format);
+
+ hdmi_wp_video_config_interface(wp, &video_timing);
+
+ hdmi_core_configure_range(core);
+
+ /*
+ * configure core video part, set software reset in the core
+ */
+ v_core_cfg.packet_mode = HDMI_PACKETMODE24BITPERPIXEL;
+
+ hdmi_core_video_config(core, &v_core_cfg);
+
+ hdmi_core_config_video_packetizer(core);
+ hdmi_core_config_csc(core);
+ hdmi_core_config_video_sampler(core);
+
+ /*
+ * configure packet info frame video see doc CEA861-D page 65
+ */
+ avi_cfg->db1_format = HDMI_INFOFRAME_AVI_DB1Y_RGB;
+ avi_cfg->db1_active_info =
+ HDMI_INFOFRAME_AVI_DB1A_ACTIVE_FORMAT_OFF;
+ avi_cfg->db1_bar_info_dv = HDMI_INFOFRAME_AVI_DB1B_NO;
+ avi_cfg->db1_scan_info = HDMI_INFOFRAME_AVI_DB1S_0;
+ avi_cfg->db2_colorimetry = HDMI_INFOFRAME_AVI_DB2C_NO;
+ avi_cfg->db2_aspect_ratio = HDMI_INFOFRAME_AVI_DB2M_NO;
+ avi_cfg->db2_active_fmt_ar = HDMI_INFOFRAME_AVI_DB2R_SAME;
+ avi_cfg->db3_itc = HDMI_INFOFRAME_AVI_DB3ITC_NO;
+ avi_cfg->db3_ec = HDMI_INFOFRAME_AVI_DB3EC_XVYUV601;
+ avi_cfg->db3_q_range = HDMI_INFOFRAME_AVI_DB3Q_DEFAULT;
+ avi_cfg->db3_nup_scaling = HDMI_INFOFRAME_AVI_DB3SC_NO;
+ avi_cfg->db4_videocode = cfg->cm.code;
+ avi_cfg->db5_pixel_repeat = HDMI_INFOFRAME_AVI_DB5PR_NO;
+ avi_cfg->db6_7_line_eoftop = 0;
+ avi_cfg->db8_9_line_sofbottom = 0;
+ avi_cfg->db10_11_pixel_eofleft = 0;
+ avi_cfg->db12_13_pixel_sofright = 0;
+
+ hdmi_core_aux_infoframe_avi_config(core);
+
+ hdmi_core_enable_video_path(core);
+
+ hdmi_core_enable_interrupts(core);
+}
+
+
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+
+static void hdmi5_core_audio_config(struct hdmi_core_data *core,
+ struct hdmi_core_audio_config *cfg)
+{
+ void __iomem *base = core->base;
+ u8 val;
+
+ /* Mute audio before configuring */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0xf, 7, 4);
+
+ /* Set the N parameter */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_N1, cfg->n, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_AUD_N2, cfg->n >> 8, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_AUD_N3, cfg->n >> 16, 3, 0);
+
+ /*
+ * CTS manual mode. Automatic mode is not supported when using audio
+ * parallel interface.
+ */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CTS3, 1, 4, 4);
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CTS1, cfg->cts, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CTS2, cfg->cts >> 8, 7, 0);
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CTS3, cfg->cts >> 16, 3, 0);
+
+ /* Layout of Audio Sample Packets: 2-channel or multichannels */
+ if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH)
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0, 0, 0);
+ else
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 1, 0, 0);
+
+ /* Configure IEC-609580 Validity bits */
+ /* Channel 0 is valid */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, 0, 0, 0);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, 0, 4, 4);
+
+ if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH)
+ val = 1;
+ else
+ val = 0;
+
+ /* Channels 1, 2 setting */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 1, 1);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 5, 5);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 2, 2);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 6, 6);
+ /* Channel 3 setting */
+ if (cfg->layout == HDMI_AUDIO_LAYOUT_6CH)
+ val = 1;
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 3, 3);
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSV, val, 7, 7);
+
+ /* Configure IEC-60958 User bits */
+ /* TODO: should be set by user. */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSU, 0, 7, 0);
+
+ /* Configure IEC-60958 Channel Status word */
+ /* CGMSA */
+ val = cfg->iec60958_cfg->status[5] & IEC958_AES5_CON_CGMSA;
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(0), val, 5, 4);
+
+ /* Copyright */
+ val = (cfg->iec60958_cfg->status[0] &
+ IEC958_AES0_CON_NOT_COPYRIGHT) >> 2;
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(0), val, 0, 0);
+
+ /* Category */
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(1),
+ cfg->iec60958_cfg->status[1]);
+
+ /* PCM audio mode */
+ val = (cfg->iec60958_cfg->status[0] & IEC958_AES0_CON_MODE) >> 6;
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(2), val, 6, 4);
+
+ /* Source number */
+ val = cfg->iec60958_cfg->status[2] & IEC958_AES2_CON_SOURCE;
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(2), val, 3, 4);
+
+ /* Channel number right 0 */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(3), 2, 3, 0);
+ /* Channel number right 1*/
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(3), 4, 7, 4);
+ /* Channel number right 2 */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(4), 6, 3, 0);
+ /* Channel number right 3*/
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(4), 8, 7, 4);
+ /* Channel number left 0 */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(5), 1, 3, 0);
+ /* Channel number left 1*/
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(5), 3, 7, 4);
+ /* Channel number left 2 */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(6), 5, 3, 0);
+ /* Channel number left 3*/
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCHNLS(6), 7, 7, 4);
+
+ /* Clock accuracy and sample rate */
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(7),
+ cfg->iec60958_cfg->status[3]);
+
+ /* Original sample rate and word length */
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDSCHNLS(8),
+ cfg->iec60958_cfg->status[4]);
+
+ /* Enable FIFO empty and full interrupts */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 3, 3, 2);
+
+ /* Configure GPA */
+ /* select HBR/SPDIF interfaces */
+ if (cfg->layout == HDMI_AUDIO_LAYOUT_2CH) {
+ /* select HBR/SPDIF interfaces */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+ /* enable two channels in GPA */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 3, 7, 0);
+ } else if (cfg->layout == HDMI_AUDIO_LAYOUT_6CH) {
+ /* select HBR/SPDIF interfaces */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+ /* enable six channels in GPA */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 0x3F, 7, 0);
+ } else {
+ /* select HBR/SPDIF interfaces */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_CONF0, 0, 5, 5);
+ /* enable eight channels in GPA */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF1, 0xFF, 7, 0);
+ }
+
+ /* disable HBR */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF2, 0, 0, 0);
+ /* enable PCUV */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_CONF2, 1, 1, 1);
+ /* enable GPA FIFO full and empty mask */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 3, 1, 0);
+ /* set polarity of GPA FIFO empty interrupts */
+ REG_FLD_MOD(base, HDMI_CORE_AUD_GP_POL, 1, 0, 0);
+
+ /* unmute audio */
+ REG_FLD_MOD(base, HDMI_CORE_FC_AUDSCONF, 0, 7, 4);
+}
+
+static void hdmi5_core_audio_infoframe_cfg(struct hdmi_core_data *core,
+ struct snd_cea_861_aud_if *info_aud)
+{
+ void __iomem *base = core->base;
+
+ /* channel count and coding type fields in AUDICONF0 are swapped */
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF0,
+ (info_aud->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CC) << 4 |
+ (info_aud->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CT) >> 4);
+
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF1, info_aud->db2_sf_ss);
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF2, info_aud->db4_ca);
+ hdmi_write_reg(base, HDMI_CORE_FC_AUDICONF3, info_aud->db5_dminh_lsv);
+}
+
+int hdmi5_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+ struct omap_dss_audio *audio, u32 pclk)
+{
+ struct hdmi_audio_format audio_format;
+ struct hdmi_audio_dma audio_dma;
+ struct hdmi_core_audio_config core_cfg;
+ int err, n, cts, channel_count;
+ unsigned int fs_nr;
+ bool word_length_16b = false;
+
+ if (!audio || !audio->iec || !audio->cea || !core)
+ return -EINVAL;
+
+ core_cfg.iec60958_cfg = audio->iec;
+
+ if (!(audio->iec->status[4] & IEC958_AES4_CON_MAX_WORDLEN_24) &&
+ (audio->iec->status[4] & IEC958_AES4_CON_WORDLEN_20_16))
+ word_length_16b = true;
+
+ /* only 16-bit word length supported atm */
+ if (!word_length_16b)
+ return -EINVAL;
+
+ switch (audio->iec->status[3] & IEC958_AES3_CON_FS) {
+ case IEC958_AES3_CON_FS_32000:
+ fs_nr = 32000;
+ break;
+ case IEC958_AES3_CON_FS_44100:
+ fs_nr = 44100;
+ break;
+ case IEC958_AES3_CON_FS_48000:
+ fs_nr = 48000;
+ break;
+ case IEC958_AES3_CON_FS_88200:
+ fs_nr = 88200;
+ break;
+ case IEC958_AES3_CON_FS_96000:
+ fs_nr = 96000;
+ break;
+ case IEC958_AES3_CON_FS_176400:
+ fs_nr = 176400;
+ break;
+ case IEC958_AES3_CON_FS_192000:
+ fs_nr = 192000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ err = hdmi_compute_acr(pclk, fs_nr, &n, &cts);
+ core_cfg.n = n;
+ core_cfg.cts = cts;
+
+ /* Audio channels settings */
+ channel_count = (audio->cea->db1_ct_cc & CEA861_AUDIO_INFOFRAME_DB1CC)
+ + 1;
+
+ if (channel_count == 2)
+ core_cfg.layout = HDMI_AUDIO_LAYOUT_2CH;
+ else if (channel_count == 6)
+ core_cfg.layout = HDMI_AUDIO_LAYOUT_6CH;
+ else
+ core_cfg.layout = HDMI_AUDIO_LAYOUT_8CH;
+
+ /* DMA settings */
+ if (word_length_16b)
+ audio_dma.transfer_size = 0x10;
+ else
+ audio_dma.transfer_size = 0x20;
+ audio_dma.block_size = 0xC0;
+ audio_dma.mode = HDMI_AUDIO_TRANSF_DMA;
+ audio_dma.fifo_threshold = 0x20; /* in number of samples */
+
+ /* audio FIFO format settings for 16-bit samples*/
+ audio_format.samples_per_word = HDMI_AUDIO_ONEWORD_TWOSAMPLES;
+ audio_format.sample_size = HDMI_AUDIO_SAMPLE_16BITS;
+ audio_format.justification = HDMI_AUDIO_JUSTIFY_LEFT;
+
+ /* only LPCM atm */
+ audio_format.type = HDMI_AUDIO_TYPE_LPCM;
+
+ /* disable start/stop signals of IEC 60958 blocks */
+ audio_format.en_sig_blk_strt_end = HDMI_AUDIO_BLOCK_SIG_STARTEND_ON;
+
+ /* configure DMA and audio FIFO format*/
+ hdmi_wp_audio_config_dma(wp, &audio_dma);
+ hdmi_wp_audio_config_format(wp, &audio_format);
+
+ /* configure the core */
+ hdmi5_core_audio_config(core, &core_cfg);
+
+ /* configure CEA 861 audio infoframe */
+ hdmi5_core_audio_infoframe_cfg(core, audio->cea);
+
+ return 0;
+}
+#endif
+
+int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
+{
+ struct resource *res;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
+ if (!res) {
+ DSSERR("can't get CORE IORESOURCE_MEM HDMI\n");
+ return -EINVAL;
+ }
+
+ core->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(core->base)) {
+ DSSERR("can't ioremap HDMI core\n");
+ return PTR_ERR(core->base);
+ }
+
+ return 0;
+}
diff --git a/drivers/video/fbdev/omap2/dss/hdmi5_core.h b/drivers/video/fbdev/omap2/dss/hdmi5_core.h
new file mode 100644
index 0000000..ce7e9f3
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/hdmi5_core.h
@@ -0,0 +1,306 @@
+/*
+ * HDMI driver definition for TI OMAP5 processors.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _HDMI5_CORE_H_
+#define _HDMI5_CORE_H_
+
+#include "hdmi.h"
+
+/* HDMI IP Core System */
+
+/* HDMI Identification */
+#define HDMI_CORE_DESIGN_ID 0x00000
+#define HDMI_CORE_REVISION_ID 0x00004
+#define HDMI_CORE_PRODUCT_ID0 0x00008
+#define HDMI_CORE_PRODUCT_ID1 0x0000C
+#define HDMI_CORE_CONFIG0_ID 0x00010
+#define HDMI_CORE_CONFIG1_ID 0x00014
+#define HDMI_CORE_CONFIG2_ID 0x00018
+#define HDMI_CORE_CONFIG3_ID 0x0001C
+
+/* HDMI Interrupt */
+#define HDMI_CORE_IH_FC_STAT0 0x00400
+#define HDMI_CORE_IH_FC_STAT1 0x00404
+#define HDMI_CORE_IH_FC_STAT2 0x00408
+#define HDMI_CORE_IH_AS_STAT0 0x0040C
+#define HDMI_CORE_IH_PHY_STAT0 0x00410
+#define HDMI_CORE_IH_I2CM_STAT0 0x00414
+#define HDMI_CORE_IH_CEC_STAT0 0x00418
+#define HDMI_CORE_IH_VP_STAT0 0x0041C
+#define HDMI_CORE_IH_I2CMPHY_STAT0 0x00420
+#define HDMI_CORE_IH_MUTE 0x007FC
+
+/* HDMI Video Sampler */
+#define HDMI_CORE_TX_INVID0 0x00800
+#define HDMI_CORE_TX_INSTUFFING 0x00804
+#define HDMI_CORE_TX_RGYDATA0 0x00808
+#define HDMI_CORE_TX_RGYDATA1 0x0080C
+#define HDMI_CORE_TX_RCRDATA0 0x00810
+#define HDMI_CORE_TX_RCRDATA1 0x00814
+#define HDMI_CORE_TX_BCBDATA0 0x00818
+#define HDMI_CORE_TX_BCBDATA1 0x0081C
+
+/* HDMI Video Packetizer */
+#define HDMI_CORE_VP_STATUS 0x02000
+#define HDMI_CORE_VP_PR_CD 0x02004
+#define HDMI_CORE_VP_STUFF 0x02008
+#define HDMI_CORE_VP_REMAP 0x0200C
+#define HDMI_CORE_VP_CONF 0x02010
+#define HDMI_CORE_VP_STAT 0x02014
+#define HDMI_CORE_VP_INT 0x02018
+#define HDMI_CORE_VP_MASK 0x0201C
+#define HDMI_CORE_VP_POL 0x02020
+
+/* Frame Composer */
+#define HDMI_CORE_FC_INVIDCONF 0x04000
+#define HDMI_CORE_FC_INHACTIV0 0x04004
+#define HDMI_CORE_FC_INHACTIV1 0x04008
+#define HDMI_CORE_FC_INHBLANK0 0x0400C
+#define HDMI_CORE_FC_INHBLANK1 0x04010
+#define HDMI_CORE_FC_INVACTIV0 0x04014
+#define HDMI_CORE_FC_INVACTIV1 0x04018
+#define HDMI_CORE_FC_INVBLANK 0x0401C
+#define HDMI_CORE_FC_HSYNCINDELAY0 0x04020
+#define HDMI_CORE_FC_HSYNCINDELAY1 0x04024
+#define HDMI_CORE_FC_HSYNCINWIDTH0 0x04028
+#define HDMI_CORE_FC_HSYNCINWIDTH1 0x0402C
+#define HDMI_CORE_FC_VSYNCINDELAY 0x04030
+#define HDMI_CORE_FC_VSYNCINWIDTH 0x04034
+#define HDMI_CORE_FC_INFREQ0 0x04038
+#define HDMI_CORE_FC_INFREQ1 0x0403C
+#define HDMI_CORE_FC_INFREQ2 0x04040
+#define HDMI_CORE_FC_CTRLDUR 0x04044
+#define HDMI_CORE_FC_EXCTRLDUR 0x04048
+#define HDMI_CORE_FC_EXCTRLSPAC 0x0404C
+#define HDMI_CORE_FC_CH0PREAM 0x04050
+#define HDMI_CORE_FC_CH1PREAM 0x04054
+#define HDMI_CORE_FC_CH2PREAM 0x04058
+#define HDMI_CORE_FC_AVICONF3 0x0405C
+#define HDMI_CORE_FC_GCP 0x04060
+#define HDMI_CORE_FC_AVICONF0 0x04064
+#define HDMI_CORE_FC_AVICONF1 0x04068
+#define HDMI_CORE_FC_AVICONF2 0x0406C
+#define HDMI_CORE_FC_AVIVID 0x04070
+#define HDMI_CORE_FC_AVIETB0 0x04074
+#define HDMI_CORE_FC_AVIETB1 0x04078
+#define HDMI_CORE_FC_AVISBB0 0x0407C
+#define HDMI_CORE_FC_AVISBB1 0x04080
+#define HDMI_CORE_FC_AVIELB0 0x04084
+#define HDMI_CORE_FC_AVIELB1 0x04088
+#define HDMI_CORE_FC_AVISRB0 0x0408C
+#define HDMI_CORE_FC_AVISRB1 0x04090
+#define HDMI_CORE_FC_AUDICONF0 0x04094
+#define HDMI_CORE_FC_AUDICONF1 0x04098
+#define HDMI_CORE_FC_AUDICONF2 0x0409C
+#define HDMI_CORE_FC_AUDICONF3 0x040A0
+#define HDMI_CORE_FC_VSDIEEEID0 0x040A4
+#define HDMI_CORE_FC_VSDSIZE 0x040A8
+#define HDMI_CORE_FC_VSDIEEEID1 0x040C0
+#define HDMI_CORE_FC_VSDIEEEID2 0x040C4
+#define HDMI_CORE_FC_VSDPAYLOAD(n) (n * 4 + 0x040C8)
+#define HDMI_CORE_FC_SPDVENDORNAME(n) (n * 4 + 0x04128)
+#define HDMI_CORE_FC_SPDPRODUCTNAME(n) (n * 4 + 0x04148)
+#define HDMI_CORE_FC_SPDDEVICEINF 0x04188
+#define HDMI_CORE_FC_AUDSCONF 0x0418C
+#define HDMI_CORE_FC_AUDSSTAT 0x04190
+#define HDMI_CORE_FC_AUDSV 0x04194
+#define HDMI_CORE_FC_AUDSU 0x04198
+#define HDMI_CORE_FC_AUDSCHNLS(n) (n * 4 + 0x0419C)
+#define HDMI_CORE_FC_CTRLQHIGH 0x041CC
+#define HDMI_CORE_FC_CTRLQLOW 0x041D0
+#define HDMI_CORE_FC_ACP0 0x041D4
+#define HDMI_CORE_FC_ACP(n) ((16-n) * 4 + 0x04208)
+#define HDMI_CORE_FC_ISCR1_0 0x04248
+#define HDMI_CORE_FC_ISCR1(n) ((16-n) * 4 + 0x0424C)
+#define HDMI_CORE_FC_ISCR2(n) ((15-n) * 4 + 0x0428C)
+#define HDMI_CORE_FC_DATAUTO0 0x042CC
+#define HDMI_CORE_FC_DATAUTO1 0x042D0
+#define HDMI_CORE_FC_DATAUTO2 0x042D4
+#define HDMI_CORE_FC_DATMAN 0x042D8
+#define HDMI_CORE_FC_DATAUTO3 0x042DC
+#define HDMI_CORE_FC_RDRB(n) (n * 4 + 0x042E0)
+#define HDMI_CORE_FC_STAT0 0x04340
+#define HDMI_CORE_FC_INT0 0x04344
+#define HDMI_CORE_FC_MASK0 0x04348
+#define HDMI_CORE_FC_POL0 0x0434C
+#define HDMI_CORE_FC_STAT1 0x04350
+#define HDMI_CORE_FC_INT1 0x04354
+#define HDMI_CORE_FC_MASK1 0x04358
+#define HDMI_CORE_FC_POL1 0x0435C
+#define HDMI_CORE_FC_STAT2 0x04360
+#define HDMI_CORE_FC_INT2 0x04364
+#define HDMI_CORE_FC_MASK2 0x04368
+#define HDMI_CORE_FC_POL2 0x0436C
+#define HDMI_CORE_FC_PRCONF 0x04380
+#define HDMI_CORE_FC_GMD_STAT 0x04400
+#define HDMI_CORE_FC_GMD_EN 0x04404
+#define HDMI_CORE_FC_GMD_UP 0x04408
+#define HDMI_CORE_FC_GMD_CONF 0x0440C
+#define HDMI_CORE_FC_GMD_HB 0x04410
+#define HDMI_CORE_FC_GMD_PB(n) (n * 4 + 0x04414)
+#define HDMI_CORE_FC_DBGFORCE 0x04800
+#define HDMI_CORE_FC_DBGAUD0CH0 0x04804
+#define HDMI_CORE_FC_DBGAUD1CH0 0x04808
+#define HDMI_CORE_FC_DBGAUD2CH0 0x0480C
+#define HDMI_CORE_FC_DBGAUD0CH1 0x04810
+#define HDMI_CORE_FC_DBGAUD1CH1 0x04814
+#define HDMI_CORE_FC_DBGAUD2CH1 0x04818
+#define HDMI_CORE_FC_DBGAUD0CH2 0x0481C
+#define HDMI_CORE_FC_DBGAUD1CH2 0x04820
+#define HDMI_CORE_FC_DBGAUD2CH2 0x04824
+#define HDMI_CORE_FC_DBGAUD0CH3 0x04828
+#define HDMI_CORE_FC_DBGAUD1CH3 0x0482C
+#define HDMI_CORE_FC_DBGAUD2CH3 0x04830
+#define HDMI_CORE_FC_DBGAUD0CH4 0x04834
+#define HDMI_CORE_FC_DBGAUD1CH4 0x04838
+#define HDMI_CORE_FC_DBGAUD2CH4 0x0483C
+#define HDMI_CORE_FC_DBGAUD0CH5 0x04840
+#define HDMI_CORE_FC_DBGAUD1CH5 0x04844
+#define HDMI_CORE_FC_DBGAUD2CH5 0x04848
+#define HDMI_CORE_FC_DBGAUD0CH6 0x0484C
+#define HDMI_CORE_FC_DBGAUD1CH6 0x04850
+#define HDMI_CORE_FC_DBGAUD2CH6 0x04854
+#define HDMI_CORE_FC_DBGAUD0CH7 0x04858
+#define HDMI_CORE_FC_DBGAUD1CH7 0x0485C
+#define HDMI_CORE_FC_DBGAUD2CH7 0x04860
+#define HDMI_CORE_FC_DBGTMDS0 0x04864
+#define HDMI_CORE_FC_DBGTMDS1 0x04868
+#define HDMI_CORE_FC_DBGTMDS2 0x0486C
+#define HDMI_CORE_PHY_MASK0 0x0C018
+#define HDMI_CORE_PHY_I2CM_INT_ADDR 0x0C09C
+#define HDMI_CORE_PHY_I2CM_CTLINT_ADDR 0x0C0A0
+
+/* HDMI Audio */
+#define HDMI_CORE_AUD_CONF0 0x0C400
+#define HDMI_CORE_AUD_CONF1 0x0C404
+#define HDMI_CORE_AUD_INT 0x0C408
+#define HDMI_CORE_AUD_N1 0x0C800
+#define HDMI_CORE_AUD_N2 0x0C804
+#define HDMI_CORE_AUD_N3 0x0C808
+#define HDMI_CORE_AUD_CTS1 0x0C80C
+#define HDMI_CORE_AUD_CTS2 0x0C810
+#define HDMI_CORE_AUD_CTS3 0x0C814
+#define HDMI_CORE_AUD_INCLKFS 0x0C818
+#define HDMI_CORE_AUD_CC08 0x0CC08
+#define HDMI_CORE_AUD_GP_CONF0 0x0D400
+#define HDMI_CORE_AUD_GP_CONF1 0x0D404
+#define HDMI_CORE_AUD_GP_CONF2 0x0D408
+#define HDMI_CORE_AUD_D010 0x0D010
+#define HDMI_CORE_AUD_GP_STAT 0x0D40C
+#define HDMI_CORE_AUD_GP_INT 0x0D410
+#define HDMI_CORE_AUD_GP_POL 0x0D414
+#define HDMI_CORE_AUD_GP_MASK 0x0D418
+
+/* HDMI Main Controller */
+#define HDMI_CORE_MC_CLKDIS 0x10004
+#define HDMI_CORE_MC_SWRSTZREQ 0x10008
+#define HDMI_CORE_MC_FLOWCTRL 0x10010
+#define HDMI_CORE_MC_PHYRSTZ 0x10014
+#define HDMI_CORE_MC_LOCKONCLOCK 0x10018
+
+/* HDMI COLOR SPACE CONVERTER */
+#define HDMI_CORE_CSC_CFG 0x10400
+#define HDMI_CORE_CSC_SCALE 0x10404
+#define HDMI_CORE_CSC_COEF_A1_MSB 0x10408
+#define HDMI_CORE_CSC_COEF_A1_LSB 0x1040C
+#define HDMI_CORE_CSC_COEF_A2_MSB 0x10410
+#define HDMI_CORE_CSC_COEF_A2_LSB 0x10414
+#define HDMI_CORE_CSC_COEF_A3_MSB 0x10418
+#define HDMI_CORE_CSC_COEF_A3_LSB 0x1041C
+#define HDMI_CORE_CSC_COEF_A4_MSB 0x10420
+#define HDMI_CORE_CSC_COEF_A4_LSB 0x10424
+#define HDMI_CORE_CSC_COEF_B1_MSB 0x10428
+#define HDMI_CORE_CSC_COEF_B1_LSB 0x1042C
+#define HDMI_CORE_CSC_COEF_B2_MSB 0x10430
+#define HDMI_CORE_CSC_COEF_B2_LSB 0x10434
+#define HDMI_CORE_CSC_COEF_B3_MSB 0x10438
+#define HDMI_CORE_CSC_COEF_B3_LSB 0x1043C
+#define HDMI_CORE_CSC_COEF_B4_MSB 0x10440
+#define HDMI_CORE_CSC_COEF_B4_LSB 0x10444
+#define HDMI_CORE_CSC_COEF_C1_MSB 0x10448
+#define HDMI_CORE_CSC_COEF_C1_LSB 0x1044C
+#define HDMI_CORE_CSC_COEF_C2_MSB 0x10450
+#define HDMI_CORE_CSC_COEF_C2_LSB 0x10454
+#define HDMI_CORE_CSC_COEF_C3_MSB 0x10458
+#define HDMI_CORE_CSC_COEF_C3_LSB 0x1045C
+#define HDMI_CORE_CSC_COEF_C4_MSB 0x10460
+#define HDMI_CORE_CSC_COEF_C4_LSB 0x10464
+
+/* HDMI HDCP */
+#define HDMI_CORE_HDCP_MASK 0x14020
+
+/* HDMI CEC */
+#define HDMI_CORE_CEC_MASK 0x17408
+
+/* HDMI I2C Master */
+#define HDMI_CORE_I2CM_SLAVE 0x157C8
+#define HDMI_CORE_I2CM_ADDRESS 0x157CC
+#define HDMI_CORE_I2CM_DATAO 0x157D0
+#define HDMI_CORE_I2CM_DATAI 0X157D4
+#define HDMI_CORE_I2CM_OPERATION 0x157D8
+#define HDMI_CORE_I2CM_INT 0x157DC
+#define HDMI_CORE_I2CM_CTLINT 0x157E0
+#define HDMI_CORE_I2CM_DIV 0x157E4
+#define HDMI_CORE_I2CM_SEGADDR 0x157E8
+#define HDMI_CORE_I2CM_SOFTRSTZ 0x157EC
+#define HDMI_CORE_I2CM_SEGPTR 0x157F0
+#define HDMI_CORE_I2CM_SS_SCL_HCNT_1_ADDR 0x157F4
+#define HDMI_CORE_I2CM_SS_SCL_HCNT_0_ADDR 0x157F8
+#define HDMI_CORE_I2CM_SS_SCL_LCNT_1_ADDR 0x157FC
+#define HDMI_CORE_I2CM_SS_SCL_LCNT_0_ADDR 0x15800
+#define HDMI_CORE_I2CM_FS_SCL_HCNT_1_ADDR 0x15804
+#define HDMI_CORE_I2CM_FS_SCL_HCNT_0_ADDR 0x15808
+#define HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR 0x1580C
+#define HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR 0x15810
+#define HDMI_CORE_I2CM_SDA_HOLD_ADDR 0x15814
+
+enum hdmi_core_packet_mode {
+ HDMI_PACKETMODERESERVEDVALUE = 0,
+ HDMI_PACKETMODE24BITPERPIXEL = 4,
+ HDMI_PACKETMODE30BITPERPIXEL = 5,
+ HDMI_PACKETMODE36BITPERPIXEL = 6,
+ HDMI_PACKETMODE48BITPERPIXEL = 7,
+};
+
+struct hdmi_core_vid_config {
+ struct hdmi_config v_fc_config;
+ enum hdmi_core_packet_mode packet_mode;
+ int data_enable_pol;
+ int vblank_osc;
+ int hblank;
+ int vblank;
+};
+
+struct csc_table {
+ u16 a1, a2, a3, a4;
+ u16 b1, b2, b3, b4;
+ u16 c1, c2, c3, c4;
+};
+
+int hdmi5_read_edid(struct hdmi_core_data *core, u8 *edid, int len);
+void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s);
+int hdmi5_core_handle_irqs(struct hdmi_core_data *core);
+void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+ struct hdmi_config *cfg);
+int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core);
+
+#if defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
+int hdmi5_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
+ struct omap_dss_audio *audio, u32 pclk);
+#endif
+#endif
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
index 0b12a3f..9a2c39c 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_common.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_common.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/err.h>
+#include <linux/of.h>
#include <video/omapdss.h>
#include "hdmi.h"
@@ -323,6 +324,46 @@
return cm;
}
+int hdmi_parse_lanes_of(struct platform_device *pdev, struct device_node *ep,
+ struct hdmi_phy_data *phy)
+{
+ struct property *prop;
+ int r, len;
+
+ prop = of_find_property(ep, "lanes", &len);
+ if (prop) {
+ u32 lanes[8];
+
+ if (len / sizeof(u32) != ARRAY_SIZE(lanes)) {
+ dev_err(&pdev->dev, "bad number of lanes\n");
+ return -EINVAL;
+ }
+
+ r = of_property_read_u32_array(ep, "lanes", lanes,
+ ARRAY_SIZE(lanes));
+ if (r) {
+ dev_err(&pdev->dev, "failed to read lane data\n");
+ return r;
+ }
+
+ r = hdmi_phy_parse_lanes(phy, lanes);
+ if (r) {
+ dev_err(&pdev->dev, "failed to parse lane data\n");
+ return r;
+ }
+ } else {
+ static const u32 default_lanes[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+ r = hdmi_phy_parse_lanes(phy, default_lanes);
+ if (WARN_ON(r)) {
+ dev_err(&pdev->dev, "failed to parse lane data\n");
+ return r;
+ }
+ }
+
+ return 0;
+}
+
#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
{
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index dd376ce..e007ac8 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
@@ -12,11 +12,22 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <video/omapdss.h>
#include "dss.h"
#include "hdmi.h"
+struct hdmi_phy_features {
+ bool bist_ctrl;
+ bool calc_freqout;
+ bool ldo_voltage;
+ unsigned long dcofreq_min;
+ unsigned long max_phy;
+};
+
+static const struct hdmi_phy_features *phy_feat;
+
void hdmi_phy_dump(struct hdmi_phy_data *phy, struct seq_file *s)
{
#define DUMPPHY(r) seq_printf(s, "%-35s %08x\n", #r,\
@@ -26,53 +37,104 @@
DUMPPHY(HDMI_TXPHY_DIGITAL_CTRL);
DUMPPHY(HDMI_TXPHY_POWER_CTRL);
DUMPPHY(HDMI_TXPHY_PAD_CFG_CTRL);
+ if (phy_feat->bist_ctrl)
+ DUMPPHY(HDMI_TXPHY_BIST_CONTROL);
}
-static irqreturn_t hdmi_irq_handler(int irq, void *data)
+int hdmi_phy_parse_lanes(struct hdmi_phy_data *phy, const u32 *lanes)
{
- struct hdmi_wp_data *wp = data;
- u32 irqstatus;
+ int i;
- irqstatus = hdmi_wp_get_irqstatus(wp);
- hdmi_wp_set_irqstatus(wp, irqstatus);
+ for (i = 0; i < 8; i += 2) {
+ u8 lane, pol;
+ int dx, dy;
- if ((irqstatus & HDMI_IRQ_LINK_CONNECT) &&
- irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
- /*
- * If we get both connect and disconnect interrupts at the same
- * time, turn off the PHY, clear interrupts, and restart, which
- * raises connect interrupt if a cable is connected, or nothing
- * if cable is not connected.
- */
- hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
+ dx = lanes[i];
+ dy = lanes[i + 1];
- hdmi_wp_set_irqstatus(wp, HDMI_IRQ_LINK_CONNECT |
- HDMI_IRQ_LINK_DISCONNECT);
+ if (dx < 0 || dx >= 8)
+ return -EINVAL;
- hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
- } else if (irqstatus & HDMI_IRQ_LINK_CONNECT) {
- hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_TXON);
- } else if (irqstatus & HDMI_IRQ_LINK_DISCONNECT) {
- hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
+ if (dy < 0 || dy >= 8)
+ return -EINVAL;
+
+ if (dx & 1) {
+ if (dy != dx - 1)
+ return -EINVAL;
+ pol = 1;
+ } else {
+ if (dy != dx + 1)
+ return -EINVAL;
+ pol = 0;
+ }
+
+ lane = dx / 2;
+
+ phy->lane_function[lane] = i / 2;
+ phy->lane_polarity[lane] = pol;
}
- return IRQ_HANDLED;
+ return 0;
}
-int hdmi_phy_enable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp,
- struct hdmi_config *cfg)
+static void hdmi_phy_configure_lanes(struct hdmi_phy_data *phy)
{
- u16 r = 0;
- u32 irqstatus;
+ static const u16 pad_cfg_list[] = {
+ 0x0123,
+ 0x0132,
+ 0x0312,
+ 0x0321,
+ 0x0231,
+ 0x0213,
+ 0x1023,
+ 0x1032,
+ 0x3012,
+ 0x3021,
+ 0x2031,
+ 0x2013,
+ 0x1203,
+ 0x1302,
+ 0x3102,
+ 0x3201,
+ 0x2301,
+ 0x2103,
+ 0x1230,
+ 0x1320,
+ 0x3120,
+ 0x3210,
+ 0x2310,
+ 0x2130,
+ };
- hdmi_wp_clear_irqenable(wp, 0xffffffff);
+ u16 lane_cfg = 0;
+ int i;
+ unsigned lane_cfg_val;
+ u16 pol_val = 0;
- irqstatus = hdmi_wp_get_irqstatus(wp);
- hdmi_wp_set_irqstatus(wp, irqstatus);
+ for (i = 0; i < 4; ++i)
+ lane_cfg |= phy->lane_function[i] << ((3 - i) * 4);
- r = hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
- if (r)
- return r;
+ pol_val |= phy->lane_polarity[0] << 0;
+ pol_val |= phy->lane_polarity[1] << 3;
+ pol_val |= phy->lane_polarity[2] << 2;
+ pol_val |= phy->lane_polarity[3] << 1;
+
+ for (i = 0; i < ARRAY_SIZE(pad_cfg_list); ++i)
+ if (pad_cfg_list[i] == lane_cfg)
+ break;
+
+ if (WARN_ON(i == ARRAY_SIZE(pad_cfg_list)))
+ i = 0;
+
+ lane_cfg_val = i;
+
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, lane_cfg_val, 26, 22);
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, pol_val, 30, 27);
+}
+
+int hdmi_phy_configure(struct hdmi_phy_data *phy, struct hdmi_config *cfg)
+{
+ u8 freqout;
/*
* Read address 0 in order to get the SCP reset done completed
@@ -81,80 +143,113 @@
hdmi_read_reg(phy->base, HDMI_TXPHY_TX_CTRL);
/*
+ * In OMAP5+, the HFBITCLK must be divided by 2 before issuing the
+ * HDMI_PHYPWRCMD_LDOON command.
+ */
+ if (phy_feat->bist_ctrl)
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_BIST_CONTROL, 1, 11, 11);
+
+ if (phy_feat->calc_freqout) {
+ /* DCOCLK/10 is pixel clock, compare pclk with DCOCLK_MIN/10 */
+ u32 dco_min = phy_feat->dcofreq_min / 10;
+ u32 pclk = cfg->timings.pixelclock;
+
+ if (pclk < dco_min)
+ freqout = 0;
+ else if ((pclk >= dco_min) && (pclk < phy_feat->max_phy))
+ freqout = 1;
+ else
+ freqout = 2;
+ } else {
+ freqout = 1;
+ }
+
+ /*
* Write to phy address 0 to configure the clock
* use HFBITCLK write HDMI_TXPHY_TX_CONTROL_FREQOUT field
*/
- REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, 0x1, 31, 30);
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_TX_CTRL, freqout, 31, 30);
/* Write to phy address 1 to start HDMI line (TXVALID and TMDSCLKEN) */
hdmi_write_reg(phy->base, HDMI_TXPHY_DIGITAL_CTRL, 0xF0000000);
/* Setup max LDO voltage */
- REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
+ if (phy_feat->ldo_voltage)
+ REG_FLD_MOD(phy->base, HDMI_TXPHY_POWER_CTRL, 0xB, 3, 0);
- /* Write to phy address 3 to change the polarity control */
- REG_FLD_MOD(phy->base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27);
-
- r = request_threaded_irq(phy->irq, NULL, hdmi_irq_handler,
- IRQF_ONESHOT, "OMAP HDMI", wp);
- if (r) {
- DSSERR("HDMI IRQ request failed\n");
- hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
- return r;
- }
-
- hdmi_wp_set_irqenable(wp,
- HDMI_IRQ_LINK_CONNECT | HDMI_IRQ_LINK_DISCONNECT);
+ hdmi_phy_configure_lanes(phy);
return 0;
}
-void hdmi_phy_disable(struct hdmi_phy_data *phy, struct hdmi_wp_data *wp)
+static const struct hdmi_phy_features omap44xx_phy_feats = {
+ .bist_ctrl = false,
+ .calc_freqout = false,
+ .ldo_voltage = true,
+ .dcofreq_min = 500000000,
+ .max_phy = 185675000,
+};
+
+static const struct hdmi_phy_features omap54xx_phy_feats = {
+ .bist_ctrl = true,
+ .calc_freqout = true,
+ .ldo_voltage = false,
+ .dcofreq_min = 750000000,
+ .max_phy = 186000000,
+};
+
+static int hdmi_phy_init_features(struct platform_device *pdev)
{
- free_irq(phy->irq, wp);
+ struct hdmi_phy_features *dst;
+ const struct hdmi_phy_features *src;
- hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_OFF);
-}
-
-#define PHY_OFFSET 0x300
-#define PHY_SIZE 0x100
-
-int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
-{
- struct resource *res;
- struct resource temp_res;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
- if (!res) {
- DSSDBG("can't get PHY mem resource by name\n");
- /*
- * if hwmod/DT doesn't have the memory resource information
- * split into HDMI sub blocks by name, we try again by getting
- * the platform's first resource. this code will be removed when
- * the driver can get the mem resources by name
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DSSERR("can't get PHY mem resource\n");
- return -EINVAL;
- }
-
- temp_res.start = res->start + PHY_OFFSET;
- temp_res.end = temp_res.start + PHY_SIZE - 1;
- res = &temp_res;
- }
-
- phy->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!phy->base) {
- DSSERR("can't ioremap TX PHY\n");
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
+ if (!dst) {
+ dev_err(&pdev->dev, "Failed to allocate HDMI PHY Features\n");
return -ENOMEM;
}
- phy->irq = platform_get_irq(pdev, 0);
- if (phy->irq < 0) {
- DSSERR("platform_get_irq failed\n");
+ switch (omapdss_get_version()) {
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
+ src = &omap44xx_phy_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP5:
+ src = &omap54xx_phy_feats;
+ break;
+
+ default:
return -ENODEV;
}
+ memcpy(dst, src, sizeof(*dst));
+ phy_feat = dst;
+
+ return 0;
+}
+
+int hdmi_phy_init(struct platform_device *pdev, struct hdmi_phy_data *phy)
+{
+ int r;
+ struct resource *res;
+
+ r = hdmi_phy_init_features(pdev);
+ if (r)
+ return r;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
+ if (!res) {
+ DSSERR("can't get PHY mem resource\n");
+ return -EINVAL;
+ }
+
+ phy->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->base)) {
+ DSSERR("can't ioremap TX PHY\n");
+ return PTR_ERR(phy->base);
+ }
+
return 0;
}
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index 5fc7121..54df12a 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
@@ -23,6 +23,18 @@
#define HDMI_DEFAULT_REGN 16
#define HDMI_DEFAULT_REGM2 1
+struct hdmi_pll_features {
+ bool sys_reset;
+ /* this is a hack, need to replace it with a better computation of M2 */
+ bool bound_dcofreq;
+ unsigned long fint_min, fint_max;
+ u16 regm_max;
+ unsigned long dcofreq_low_min, dcofreq_low_max;
+ unsigned long dcofreq_high_min, dcofreq_high_max;
+};
+
+static const struct hdmi_pll_features *pll_feat;
+
void hdmi_pll_dump(struct hdmi_pll_data *pll, struct seq_file *s)
{
#define DUMPPLL(r) seq_printf(s, "%-35s %08x\n", #r,\
@@ -57,7 +69,11 @@
refclk = clkin / pi->regn;
- pi->regm2 = HDMI_DEFAULT_REGM2;
+ /* temorary hack to make sure DCO freq isn't calculated too low */
+ if (pll_feat->bound_dcofreq && phy <= 65000)
+ pi->regm2 = 3;
+ else
+ pi->regm2 = HDMI_DEFAULT_REGM2;
/*
* multiplier is pixel_clk/ref_clk
@@ -154,7 +170,7 @@
static int hdmi_pll_reset(struct hdmi_pll_data *pll)
{
/* SYSRESET controlled by power FSM */
- REG_FLD_MOD(pll->base, PLLCTRL_PLL_CONTROL, 0x0, 3, 3);
+ REG_FLD_MOD(pll->base, PLLCTRL_PLL_CONTROL, pll_feat->sys_reset, 3, 3);
/* READ 0x0 reset is in progress */
if (hdmi_wait_for_bit_change(pll->base, PLLCTRL_PLL_STATUS, 0, 0, 1)
@@ -194,38 +210,81 @@
hdmi_wp_set_pll_pwr(wp, HDMI_PLLPWRCMD_ALLOFF);
}
-#define PLL_OFFSET 0x200
-#define PLL_SIZE 0x100
+static const struct hdmi_pll_features omap44xx_pll_feats = {
+ .sys_reset = false,
+ .bound_dcofreq = false,
+ .fint_min = 500000,
+ .fint_max = 2500000,
+ .regm_max = 4095,
+ .dcofreq_low_min = 500000000,
+ .dcofreq_low_max = 1000000000,
+ .dcofreq_high_min = 1000000000,
+ .dcofreq_high_max = 2000000000,
+};
+
+static const struct hdmi_pll_features omap54xx_pll_feats = {
+ .sys_reset = true,
+ .bound_dcofreq = true,
+ .fint_min = 620000,
+ .fint_max = 2500000,
+ .regm_max = 2046,
+ .dcofreq_low_min = 750000000,
+ .dcofreq_low_max = 1500000000,
+ .dcofreq_high_min = 1250000000,
+ .dcofreq_high_max = 2500000000UL,
+};
+
+static int hdmi_pll_init_features(struct platform_device *pdev)
+{
+ struct hdmi_pll_features *dst;
+ const struct hdmi_pll_features *src;
+
+ dst = devm_kzalloc(&pdev->dev, sizeof(*dst), GFP_KERNEL);
+ if (!dst) {
+ dev_err(&pdev->dev, "Failed to allocate HDMI PHY Features\n");
+ return -ENOMEM;
+ }
+
+ switch (omapdss_get_version()) {
+ case OMAPDSS_VER_OMAP4430_ES1:
+ case OMAPDSS_VER_OMAP4430_ES2:
+ case OMAPDSS_VER_OMAP4:
+ src = &omap44xx_pll_feats;
+ break;
+
+ case OMAPDSS_VER_OMAP5:
+ src = &omap54xx_pll_feats;
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+ memcpy(dst, src, sizeof(*dst));
+ pll_feat = dst;
+
+ return 0;
+}
int hdmi_pll_init(struct platform_device *pdev, struct hdmi_pll_data *pll)
{
+ int r;
struct resource *res;
- struct resource temp_res;
+
+ r = hdmi_pll_init_features(pdev);
+ if (r)
+ return r;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll");
if (!res) {
- DSSDBG("can't get PLL mem resource by name\n");
- /*
- * if hwmod/DT doesn't have the memory resource information
- * split into HDMI sub blocks by name, we try again by getting
- * the platform's first resource. this code will be removed when
- * the driver can get the mem resources by name
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DSSERR("can't get PLL mem resource\n");
- return -EINVAL;
- }
-
- temp_res.start = res->start + PLL_OFFSET;
- temp_res.end = temp_res.start + PLL_SIZE - 1;
- res = &temp_res;
+ DSSERR("can't get PLL mem resource\n");
+ return -EINVAL;
}
- pll->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!pll->base) {
+ pll->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pll->base)) {
DSSERR("can't ioremap PLLCTRL\n");
- return -ENOMEM;
+ return PTR_ERR(pll->base);
}
return 0;
diff --git a/drivers/video/fbdev/omap2/dss/hdmi_wp.c b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
index f5f4ccf..496327e 100644
--- a/drivers/video/fbdev/omap2/dss/hdmi_wp.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
@@ -185,7 +185,7 @@
timings->interlace = param->timings.interlace;
}
-#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO)
+#if defined(CONFIG_OMAP4_DSS_HDMI_AUDIO) || defined(CONFIG_OMAP5_DSS_HDMI_AUDIO)
void hdmi_wp_audio_config_format(struct hdmi_wp_data *wp,
struct hdmi_audio_format *aud_fmt)
{
@@ -238,37 +238,20 @@
}
#endif
-#define WP_SIZE 0x200
-
int hdmi_wp_init(struct platform_device *pdev, struct hdmi_wp_data *wp)
{
struct resource *res;
- struct resource temp_res;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wp");
if (!res) {
- DSSDBG("can't get WP mem resource by name\n");
- /*
- * if hwmod/DT doesn't have the memory resource information
- * split into HDMI sub blocks by name, we try again by getting
- * the platform's first resource. this code will be removed when
- * the driver can get the mem resources by name
- */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- DSSERR("can't get WP mem resource\n");
- return -EINVAL;
- }
-
- temp_res.start = res->start;
- temp_res.end = temp_res.start + WP_SIZE - 1;
- res = &temp_res;
+ DSSERR("can't get WP mem resource\n");
+ return -EINVAL;
}
- wp->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!wp->base) {
+ wp->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(wp->base)) {
DSSERR("can't ioremap HDMI WP\n");
- return -ENOMEM;
+ return PTR_ERR(wp->base);
}
return 0;
diff --git a/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c b/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
new file mode 100644
index 0000000..99af9e8
--- /dev/null
+++ b/drivers/video/fbdev/omap2/dss/omapdss-boot-init.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) 2014 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * As omapdss panel drivers are omapdss specific, but we want to define the
+ * DT-data in generic manner, we convert the compatible strings of the panel and
+ * encoder nodes from "panel-foo" to "omapdss,panel-foo". This way we can have
+ * both correct DT data and omapdss specific drivers.
+ *
+ * When we get generic panel drivers to the kernel, this file will be removed.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+
+static struct list_head dss_conv_list __initdata;
+
+static const char prefix[] __initconst = "omapdss,";
+
+struct dss_conv_node {
+ struct list_head list;
+ struct device_node *node;
+ bool root;
+};
+
+static int __init omapdss_count_strings(const struct property *prop)
+{
+ const char *p = prop->value;
+ int l = 0, total = 0;
+ int i;
+
+ for (i = 0; total < prop->length; total += l, p += l, i++)
+ l = strlen(p) + 1;
+
+ return i;
+}
+
+static void __init omapdss_update_prop(struct device_node *node, char *compat,
+ int len)
+{
+ struct property *prop;
+
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return;
+
+ prop->name = "compatible";
+ prop->value = compat;
+ prop->length = len;
+
+ of_update_property(node, prop);
+}
+
+static void __init omapdss_prefix_strcpy(char *dst, int dst_len,
+ const char *src, int src_len)
+{
+ size_t total = 0;
+
+ while (total < src_len) {
+ size_t l = strlen(src) + 1;
+
+ strcpy(dst, prefix);
+ dst += strlen(prefix);
+
+ strcpy(dst, src);
+ dst += l;
+
+ src += l;
+ total += l;
+ }
+}
+
+/* prepend compatible property strings with "omapdss," */
+static void __init omapdss_omapify_node(struct device_node *node)
+{
+ struct property *prop;
+ char *new_compat;
+ int num_strs;
+ int new_len;
+
+ prop = of_find_property(node, "compatible", NULL);
+
+ if (!prop || !prop->value)
+ return;
+
+ if (strnlen(prop->value, prop->length) >= prop->length)
+ return;
+
+ /* is it already prefixed? */
+ if (strncmp(prefix, prop->value, strlen(prefix)) == 0)
+ return;
+
+ num_strs = omapdss_count_strings(prop);
+
+ new_len = prop->length + strlen(prefix) * num_strs;
+ new_compat = kmalloc(new_len, GFP_KERNEL);
+
+ omapdss_prefix_strcpy(new_compat, new_len, prop->value, prop->length);
+
+ omapdss_update_prop(node, new_compat, new_len);
+}
+
+static void __init omapdss_add_to_list(struct device_node *node, bool root)
+{
+ struct dss_conv_node *n = kmalloc(sizeof(struct dss_conv_node),
+ GFP_KERNEL);
+ n->node = node;
+ n->root = root;
+ list_add(&n->list, &dss_conv_list);
+}
+
+static bool __init omapdss_list_contains(const struct device_node *node)
+{
+ struct dss_conv_node *n;
+
+ list_for_each_entry(n, &dss_conv_list, list) {
+ if (n->node == node)
+ return true;
+ }
+
+ return false;
+}
+
+static void __init omapdss_walk_device(struct device_node *node, bool root)
+{
+ struct device_node *n;
+
+ omapdss_add_to_list(node, root);
+
+ /*
+ * of_graph_get_remote_port_parent() prints an error if there is no
+ * port/ports node. To avoid that, check first that there's the node.
+ */
+ n = of_get_child_by_name(node, "ports");
+ if (!n)
+ n = of_get_child_by_name(node, "port");
+ if (!n)
+ return;
+
+ of_node_put(n);
+
+ n = NULL;
+ while ((n = of_graph_get_next_endpoint(node, n)) != NULL) {
+ struct device_node *pn;
+
+ pn = of_graph_get_remote_port_parent(n);
+
+ if (!pn) {
+ of_node_put(n);
+ continue;
+ }
+
+ if (!of_device_is_available(pn) || omapdss_list_contains(pn)) {
+ of_node_put(pn);
+ of_node_put(n);
+ continue;
+ }
+
+ omapdss_walk_device(pn, false);
+
+ of_node_put(n);
+ }
+}
+
+static const struct of_device_id omapdss_of_match[] __initconst = {
+ { .compatible = "ti,omap2-dss", },
+ { .compatible = "ti,omap3-dss", },
+ { .compatible = "ti,omap4-dss", },
+ { .compatible = "ti,omap5-dss", },
+ {},
+};
+
+static int __init omapdss_boot_init(void)
+{
+ struct device_node *dss, *child;
+
+ INIT_LIST_HEAD(&dss_conv_list);
+
+ dss = of_find_matching_node(NULL, omapdss_of_match);
+
+ if (dss == NULL || !of_device_is_available(dss))
+ return 0;
+
+ omapdss_walk_device(dss, true);
+
+ for_each_available_child_of_node(dss, child) {
+ if (!of_find_property(child, "compatible", NULL)) {
+ of_node_put(child);
+ continue;
+ }
+
+ omapdss_walk_device(child, true);
+ }
+
+ while (!list_empty(&dss_conv_list)) {
+ struct dss_conv_node *n;
+
+ n = list_first_entry(&dss_conv_list, struct dss_conv_node,
+ list);
+
+ if (!n->root)
+ omapdss_omapify_node(n->node);
+
+ list_del(&n->list);
+ of_node_put(n->node);
+ kfree(n);
+ }
+
+ return 0;
+}
+
+subsys_initcall(omapdss_boot_init);
diff --git a/drivers/video/fbdev/omap2/dss/venc_panel.c b/drivers/video/fbdev/omap2/dss/venc_panel.c
deleted file mode 100644
index af68cd4..0000000
--- a/drivers/video/fbdev/omap2/dss/venc_panel.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2009 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * VENC panel driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/mutex.h>
-#include <linux/module.h>
-
-#include <video/omapdss.h>
-
-#include "dss.h"
-
-static struct {
- struct mutex lock;
-} venc_panel;
-
-static ssize_t display_output_type_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct omap_dss_device *dssdev = to_dss_device(dev);
- const char *ret;
-
- switch (dssdev->phy.venc.type) {
- case OMAP_DSS_VENC_TYPE_COMPOSITE:
- ret = "composite";
- break;
- case OMAP_DSS_VENC_TYPE_SVIDEO:
- ret = "svideo";
- break;
- default:
- return -EINVAL;
- }
-
- return snprintf(buf, PAGE_SIZE, "%s\n", ret);
-}
-
-static ssize_t display_output_type_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct omap_dss_device *dssdev = to_dss_device(dev);
- enum omap_dss_venc_type new_type;
-
- if (sysfs_streq("composite", buf))
- new_type = OMAP_DSS_VENC_TYPE_COMPOSITE;
- else if (sysfs_streq("svideo", buf))
- new_type = OMAP_DSS_VENC_TYPE_SVIDEO;
- else
- return -EINVAL;
-
- mutex_lock(&venc_panel.lock);
-
- if (dssdev->phy.venc.type != new_type) {
- dssdev->phy.venc.type = new_type;
- omapdss_venc_set_type(dssdev, new_type);
- if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
- omapdss_venc_display_disable(dssdev);
- omapdss_venc_display_enable(dssdev);
- }
- }
-
- mutex_unlock(&venc_panel.lock);
-
- return size;
-}
-
-static DEVICE_ATTR(output_type, S_IRUGO | S_IWUSR,
- display_output_type_show, display_output_type_store);
-
-static int venc_panel_probe(struct omap_dss_device *dssdev)
-{
- /* set default timings to PAL */
- const struct omap_video_timings default_timings = {
- .x_res = 720,
- .y_res = 574,
- .pixelclock = 13500000,
- .hsw = 64,
- .hfp = 12,
- .hbp = 68,
- .vsw = 5,
- .vfp = 5,
- .vbp = 41,
-
- .vsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
- .hsync_level = OMAPDSS_SIG_ACTIVE_HIGH,
-
- .interlace = true,
- };
-
- mutex_init(&venc_panel.lock);
-
- dssdev->panel.timings = default_timings;
-
- return device_create_file(dssdev->dev, &dev_attr_output_type);
-}
-
-static void venc_panel_remove(struct omap_dss_device *dssdev)
-{
- device_remove_file(dssdev->dev, &dev_attr_output_type);
-}
-
-static int venc_panel_enable(struct omap_dss_device *dssdev)
-{
- int r;
-
- dev_dbg(dssdev->dev, "venc_panel_enable\n");
-
- mutex_lock(&venc_panel.lock);
-
- if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
- r = -EINVAL;
- goto err;
- }
-
- omapdss_venc_set_timings(dssdev, &dssdev->panel.timings);
- omapdss_venc_set_type(dssdev, dssdev->phy.venc.type);
- omapdss_venc_invert_vid_out_polarity(dssdev,
- dssdev->phy.venc.invert_polarity);
-
- r = omapdss_venc_display_enable(dssdev);
- if (r)
- goto err;
-
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
- mutex_unlock(&venc_panel.lock);
-
- return 0;
-err:
- mutex_unlock(&venc_panel.lock);
-
- return r;
-}
-
-static void venc_panel_disable(struct omap_dss_device *dssdev)
-{
- dev_dbg(dssdev->dev, "venc_panel_disable\n");
-
- mutex_lock(&venc_panel.lock);
-
- if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED)
- goto end;
-
- omapdss_venc_display_disable(dssdev);
-
- dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-end:
- mutex_unlock(&venc_panel.lock);
-}
-
-static void venc_panel_set_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- dev_dbg(dssdev->dev, "venc_panel_set_timings\n");
-
- mutex_lock(&venc_panel.lock);
-
- omapdss_venc_set_timings(dssdev, timings);
- dssdev->panel.timings = *timings;
-
- mutex_unlock(&venc_panel.lock);
-}
-
-static int venc_panel_check_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
-{
- dev_dbg(dssdev->dev, "venc_panel_check_timings\n");
-
- return omapdss_venc_check_timings(dssdev, timings);
-}
-
-static u32 venc_panel_get_wss(struct omap_dss_device *dssdev)
-{
- dev_dbg(dssdev->dev, "venc_panel_get_wss\n");
-
- return omapdss_venc_get_wss(dssdev);
-}
-
-static int venc_panel_set_wss(struct omap_dss_device *dssdev, u32 wss)
-{
- dev_dbg(dssdev->dev, "venc_panel_set_wss\n");
-
- return omapdss_venc_set_wss(dssdev, wss);
-}
-
-static struct omap_dss_driver venc_driver = {
- .probe = venc_panel_probe,
- .remove = venc_panel_remove,
-
- .enable = venc_panel_enable,
- .disable = venc_panel_disable,
-
- .get_resolution = omapdss_default_get_resolution,
- .get_recommended_bpp = omapdss_default_get_recommended_bpp,
-
- .set_timings = venc_panel_set_timings,
- .check_timings = venc_panel_check_timings,
-
- .get_wss = venc_panel_get_wss,
- .set_wss = venc_panel_set_wss,
-
- .driver = {
- .name = "venc",
- .owner = THIS_MODULE,
- },
-};
-
-int venc_panel_init(void)
-{
- return omap_dss_register_driver(&venc_driver);
-}
-
-void venc_panel_exit(void)
-{
- omap_dss_unregister_driver(&venc_driver);
-}
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 6adb445..fc06c5b 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -319,6 +319,7 @@
OMAPDSS_VER_OMAP4430_ES2, /* OMAP4430 ES2.0, 2.1, 2.2 */
OMAPDSS_VER_OMAP4, /* All other OMAP4s */
OMAPDSS_VER_OMAP5,
+ OMAPDSS_VER_AM43xx,
};
/* Board specific data */
@@ -388,8 +389,8 @@
};
struct omap_overlay_info {
- u32 paddr;
- u32 p_uv_addr; /* for NV12 format */
+ dma_addr_t paddr;
+ dma_addr_t p_uv_addr; /* for NV12 format */
u16 screen_width;
u16 width;
u16 height;
@@ -964,9 +965,6 @@
bool replication, const struct omap_video_timings *mgr_timings,
bool mem_to_mem);
-#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
-#define to_dss_device(x) container_of((x), struct omap_dss_device, old_dev)
-
int omapdss_compat_init(void);
void omapdss_compat_uninit(void);