USB: make transfer_buffer_lengths in struct urb field u32
Roel Kluin pointed out that transfer_buffer_lengths in struct urb was
declared as an 'int'. This patch changes this field to be 'u32' to
prevent any potential negative conversion and comparison errors.
This triggered a few compiler warning messages when these fields were
being used with the min macro, so they have also been fixed up in this
patch.
Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 3b42888..a56b24d 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1437,7 +1437,7 @@
}
if (urb->transfer_buffer_length > 1)
buf [1] = 0;
- urb->actual_length = min (2,
+ urb->actual_length = min_t(u32, 2,
urb->transfer_buffer_length);
value = 0;
status = 0;
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 4dda31b..a2b3054 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -772,7 +772,7 @@
break;
case PIPE_INTERRUPT:
urb->interval = ep->period;
- ep->length = min((int)ep->maxpacket,
+ ep->length = min_t(u32, ep->maxpacket,
urb->transfer_buffer_length);
/* urb submitted for already existing endpoint */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 5e942d9..713f4cf 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1394,7 +1394,7 @@
(int)urb->iso_frame_desc[td->iso_cnt].length);
} else {
buf = (u16 *)(urb->transfer_buffer + urb->actual_length);
- size = min((int)bufsize,
+ size = min_t(u32, bufsize,
urb->transfer_buffer_length - urb->actual_length);
}
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index e106e9d..a949259 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -230,7 +230,7 @@
writeb(usb_pipedevice(urb->pipe), data_reg);
sl811_write(sl811, bank + SL11H_HOSTCTLREG, control);
- ep->length = min((int)len,
+ ep->length = min_t(u32, len,
urb->transfer_buffer_length - urb->actual_length);
PACKET("IN%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "",
!!usb_gettoggle(urb->dev, ep->epnum, 0), ep, len);
@@ -255,7 +255,7 @@
buf = urb->transfer_buffer + urb->actual_length;
prefetch(buf);
- len = min((int)ep->maxpacket,
+ len = min_t(u32, ep->maxpacket,
urb->transfer_buffer_length - urb->actual_length);
if (!(control & SL11H_HCTLMASK_ISOCH)
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 79a7668..9d0675e 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -1568,7 +1568,7 @@
struct u132_target *target = &ftdi->target[ed];
struct u132_command *command = &ftdi->command[
COMMAND_MASK & ftdi->command_next];
- int remaining_length = urb->transfer_buffer_length -
+ u32 remaining_length = urb->transfer_buffer_length -
urb->actual_length;
command->header = 0x82 | (ed << 5);
if (remaining_length == 0) {
@@ -1702,7 +1702,7 @@
| (address << 0);
command->width = usb_maxpacket(urb->dev, urb->pipe,
usb_pipeout(urb->pipe));
- command->follows = min(1024,
+ command->follows = min_t(u32, 1024,
urb->transfer_buffer_length -
urb->actual_length);
command->value = 0;
@@ -1766,7 +1766,7 @@
mutex_lock(&ftdi->u132_lock);
command_size = ftdi->command_next - ftdi->command_head;
if (command_size < COMMAND_SIZE) {
- int remaining_length = urb->transfer_buffer_length -
+ u32 remaining_length = urb->transfer_buffer_length -
urb->actual_length;
struct u132_target *target = &ftdi->target[ed];
struct u132_command *command = &ftdi->command[