ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
Actually, the base address of uart is different between EXYNOS4
and EXYNOS5 and this patch enables to support uart for EXYNOS4
and EXYNOS5 SoCs at runtime.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2117f02..f8a3770 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -44,6 +44,7 @@
# device support
+obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 02eed29..4a82cf0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -477,7 +477,10 @@
for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+ if (soc_is_exynos5250())
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
+ else
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
static DEFINE_SPINLOCK(eint_lock);
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
new file mode 100644
index 0000000..2e85c02
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base EXYNOS UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+#define EXYNOS_UART_RESOURCE(_series, _nr) \
+static struct resource exynos##_series##_uart##_nr##_resource[] = { \
+ [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \
+ [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \
+};
+
+EXYNOS_UART_RESOURCE(4, 0)
+EXYNOS_UART_RESOURCE(4, 1)
+EXYNOS_UART_RESOURCE(4, 2)
+EXYNOS_UART_RESOURCE(4, 3)
+
+struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos4_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos4_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart1_resource),
+ },
+ [2] = {
+ .resources = exynos4_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos4_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
+ },
+};
+
+EXYNOS_UART_RESOURCE(5, 0)
+EXYNOS_UART_RESOURCE(5, 1)
+EXYNOS_UART_RESOURCE(5, 2)
+EXYNOS_UART_RESOURCE(5, 3)
+
+struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos5_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos5_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [2] = {
+ .resources = exynos5_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos5_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart3_resource),
+ },
+};
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6cacf16..6c857ff 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,8 +21,13 @@
*/
.macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
+ mov \rp, #0x10000000
+ ldr \rp, [\rp, #0x0]
+ and \rp, \rp, #0xf00000
+ teq \rp, #0x500000 @@ EXYNOS5
+ ldreq \rp, =EXYNOS5_PA_UART
+ movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
+ ldr \rv, =S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 1d401c95..f78070e 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -173,4 +173,16 @@
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
+#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
+#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
+#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
+#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
+
+#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
+#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
+#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
+#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
+#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
+
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 2ad4e9c..ea513c6 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -153,7 +153,6 @@
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
-#define S3C_PA_UART EXYNOS4_PA_UART
#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
@@ -182,15 +181,18 @@
/* Compatibility UART */
+#define EXYNOS4_PA_UART0 0x13800000
+#define EXYNOS4_PA_UART1 0x13810000
+#define EXYNOS4_PA_UART2 0x13820000
+#define EXYNOS4_PA_UART3 0x13830000
+#define EXYNOS4_SZ_UART SZ_256
+
+#define EXYNOS5_PA_UART0 0x12C00000
+#define EXYNOS5_PA_UART1 0x12C10000
+#define EXYNOS5_PA_UART2 0x12C20000
+#define EXYNOS5_PA_UART3 0x12C30000
+#define EXYNOS5_SZ_UART SZ_256
+
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
-
-#define S5P_SZ_UART SZ_256
-
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 21d97bc..493f4f3 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - uncompress code
+ * EXYNOS - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,12 +12,20 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+#include <asm/mach-types.h>
+
#include <mach/map.h>
+
+volatile u8 *uart_base;
+
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
- /* we do not need to do any cpu detection here at the moment. */
+ if (machine_is_smdk5250())
+ uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
+ else
+ uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
/*
* For preventing FIFO overrun or infinite loop of UART console,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8167ce6..10e235cc7 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -40,6 +40,10 @@
help
Use the High Resolution timer support
+config S5P_DEV_UART
+ def_bool y
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
config S5P_PM
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 30d8c30..4bd8241 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,7 +12,6 @@
# Core files
-obj-y += dev-uart.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
@@ -23,5 +22,7 @@
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
+
+obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4214ea0..32cc67e 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -26,6 +26,8 @@
extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index ee48e12..7e068d1 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -37,7 +37,9 @@
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
+#ifdef S3C_PA_UART
#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)