wl18xx: clean up phy module parameters
Give all wl18xx phy module paramters -1 as a default value, indicating
the paramter was not set. Add previous default values to the default
18xx priv conf structure.
Remove the board_type field from wl18xx priv. The field with the same
name inside the phy conf is good enough for our purposes.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index 78b2e54..b2ccff7 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -45,16 +45,18 @@
static char *ht_mode_param = "wide";
static char *board_type_param = "hdk";
-static bool dc2dc_param = false;
-static int n_antennas_2_param = 1;
-static int n_antennas_5_param = 1;
static bool checksum_param = false;
static bool enable_11a_param = true;
-static int low_band_component = -1;
-static int low_band_component_type = -1;
-static int high_band_component = -1;
-static int high_band_component_type = -1;
-static int pwr_limit_reference_11_abg = -1;
+
+/* phy paramters */
+static int dc2dc_param = -1;
+static int n_antennas_2_param = -1;
+static int n_antennas_5_param = -1;
+static int low_band_component_param = -1;
+static int low_band_component_type_param = -1;
+static int high_band_component_param = -1;
+static int high_band_component_type_param = -1;
+static int pwr_limit_reference_11_abg_param = -1;
static const u8 wl18xx_rate_to_idx_2ghz[] = {
/* MCS rates are used only with 11n */
@@ -516,6 +518,9 @@
.low_power_val = 0x00,
.med_power_val = 0x0a,
.high_power_val = 0x1e,
+ .external_pa_dc2dc = 0,
+ .number_of_assembled_ant2_4 = 1,
+ .number_of_assembled_ant5 = 1,
},
};
@@ -1320,17 +1325,17 @@
goto out_free;
if (!strcmp(board_type_param, "fpga")) {
- priv->board_type = BOARD_TYPE_FPGA_18XX;
+ priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX;
} else if (!strcmp(board_type_param, "hdk")) {
- priv->board_type = BOARD_TYPE_HDK_18XX;
+ priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX;
/* HACK! Just for now we hardcode HDK to 0x06 */
priv->conf.phy.low_band_component_type = 0x06;
} else if (!strcmp(board_type_param, "dvp")) {
- priv->board_type = BOARD_TYPE_DVP_18XX;
+ priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX;
} else if (!strcmp(board_type_param, "evb")) {
- priv->board_type = BOARD_TYPE_EVB_18XX;
+ priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX;
} else if (!strcmp(board_type_param, "com8")) {
- priv->board_type = BOARD_TYPE_COM8_18XX;
+ priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX;
/* HACK! Just for now we hardcode COM8 to 0x06 */
priv->conf.phy.low_band_component_type = 0x06;
} else {
@@ -1339,38 +1344,26 @@
goto out_free;
}
- /*
- * If the module param is not set, update it with the one from
- * conf. If it is set, overwrite conf with it.
- */
- if (low_band_component == -1)
- low_band_component = priv->conf.phy.low_band_component;
- else
- priv->conf.phy.low_band_component = low_band_component;
- if (low_band_component_type == -1)
- low_band_component_type =
- priv->conf.phy.low_band_component_type;
- else
+ /* If the module param is set, update it in conf */
+ if (low_band_component_param != -1)
+ priv->conf.phy.low_band_component = low_band_component_param;
+ if (low_band_component_type_param != -1)
priv->conf.phy.low_band_component_type =
- low_band_component_type;
-
- if (high_band_component == -1)
- high_band_component = priv->conf.phy.high_band_component;
- else
- priv->conf.phy.high_band_component = high_band_component;
- if (high_band_component_type == -1)
- high_band_component_type =
- priv->conf.phy.high_band_component_type;
- else
+ low_band_component_type_param;
+ if (high_band_component_param != -1)
+ priv->conf.phy.high_band_component = high_band_component_param;
+ if (high_band_component_type_param != -1)
priv->conf.phy.high_band_component_type =
- high_band_component_type;
-
- if (pwr_limit_reference_11_abg == -1)
- pwr_limit_reference_11_abg =
- priv->conf.phy.pwr_limit_reference_11_abg;
- else
+ high_band_component_type_param;
+ if (pwr_limit_reference_11_abg_param != -1)
priv->conf.phy.pwr_limit_reference_11_abg =
- pwr_limit_reference_11_abg;
+ pwr_limit_reference_11_abg_param;
+ if (n_antennas_2_param != -1)
+ priv->conf.phy.number_of_assembled_ant2_4 = n_antennas_2_param;
+ if (n_antennas_5_param != -1)
+ priv->conf.phy.number_of_assembled_ant5 = n_antennas_5_param;
+ if (dc2dc_param != -1)
+ priv->conf.phy.external_pa_dc2dc = dc2dc_param;
if (!checksum_param) {
wl18xx_ops.set_rx_csum = NULL;
@@ -1422,38 +1415,45 @@
MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or "
"dvp");
-module_param_named(dc2dc, dc2dc_param, bool, S_IRUSR);
-MODULE_PARM_DESC(dc2dc, "External DC2DC: boolean (defaults to false)");
-
-module_param_named(n_antennas_2, n_antennas_2_param, uint, S_IRUSR);
-MODULE_PARM_DESC(n_antennas_2, "Number of installed 2.4GHz antennas: 1 (default) or 2");
-
-module_param_named(n_antennas_5, n_antennas_5_param, uint, S_IRUSR);
-MODULE_PARM_DESC(n_antennas_5, "Number of installed 5GHz antennas: 1 (default) or 2");
-
module_param_named(checksum, checksum_param, bool, S_IRUSR);
MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)");
module_param_named(enable_11a, enable_11a_param, bool, S_IRUSR);
MODULE_PARM_DESC(enable_11a, "Enable 11a (5GHz): boolean (defaults to true)");
-module_param(low_band_component, uint, S_IRUSR);
+module_param_named(dc2dc, dc2dc_param, int, S_IRUSR);
+MODULE_PARM_DESC(dc2dc, "External DC2DC: u8 (defaults to 0)");
+
+module_param_named(n_antennas_2, n_antennas_2_param, int, S_IRUSR);
+MODULE_PARM_DESC(n_antennas_2,
+ "Number of installed 2.4GHz antennas: 1 (default) or 2");
+
+module_param_named(n_antennas_5, n_antennas_5_param, int, S_IRUSR);
+MODULE_PARM_DESC(n_antennas_5,
+ "Number of installed 5GHz antennas: 1 (default) or 2");
+
+module_param_named(low_band_component, low_band_component_param, int,
+ S_IRUSR);
MODULE_PARM_DESC(low_band_component, "Low band component: u8 "
"(default is 0x01)");
-module_param(low_band_component_type, uint, S_IRUSR);
+module_param_named(low_band_component_type, low_band_component_type_param,
+ int, S_IRUSR);
MODULE_PARM_DESC(low_band_component_type, "Low band component type: u8 "
"(default is 0x05 or 0x06 depending on the board_type)");
-module_param(high_band_component, uint, S_IRUSR);
+module_param_named(high_band_component, high_band_component_param, int,
+ S_IRUSR);
MODULE_PARM_DESC(high_band_component, "High band component: u8, "
"(default is 0x01)");
-module_param(high_band_component_type, uint, S_IRUSR);
+module_param_named(high_band_component_type, high_band_component_type_param,
+ int, S_IRUSR);
MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 "
"(default is 0x09)");
-module_param(pwr_limit_reference_11_abg, uint, S_IRUSR);
+module_param_named(pwr_limit_reference_11_abg,
+ pwr_limit_reference_11_abg_param, int, S_IRUSR);
MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 "
"(default is 0xc8)");
diff --git a/drivers/net/wireless/ti/wl18xx/wl18xx.h b/drivers/net/wireless/ti/wl18xx/wl18xx.h
index b9c4309..bc67a47 100644
--- a/drivers/net/wireless/ti/wl18xx/wl18xx.h
+++ b/drivers/net/wireless/ti/wl18xx/wl18xx.h
@@ -35,8 +35,6 @@
/* Index of last released Tx desc in FW */
u8 last_fw_rls_idx;
- u8 board_type;
-
/* number of VIFs requiring extra spare mem-blocks */
int extra_spare_vif_count;
};