xhci: Introduce xhci_init_driver()
Since the struct hc_driver is mostly the same across the xhci-pci,
xhci-plat, and the upcoming xhci-tegra driver, introduce the function
xhci_init_driver() which will populate the hc_driver with the default
xHCI operations. The caller must supply a setup function which will
be used as the hc_driver's reset callback.
Note that xhci-plat also overrides the default ->start() callback so
that it can do rcar-specific initialization.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c22a3e1..605852d 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -40,6 +40,8 @@
static const char hcd_name[] = "xhci_hcd";
+static struct hc_driver __read_mostly xhci_pci_hc_driver;
+
/* called after powerup, by probe or system-pm "wakeup" */
static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
{
@@ -324,68 +326,6 @@
}
#endif /* CONFIG_PM */
-static const struct hc_driver xhci_pci_hc_driver = {
- .description = hcd_name,
- .product_desc = "xHCI Host Controller",
- .hcd_priv_size = sizeof(struct xhci_hcd *),
-
- /*
- * generic hardware linkage
- */
- .irq = xhci_irq,
- .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED,
-
- /*
- * basic lifecycle operations
- */
- .reset = xhci_pci_setup,
- .start = xhci_run,
-#ifdef CONFIG_PM
- .pci_suspend = xhci_pci_suspend,
- .pci_resume = xhci_pci_resume,
-#endif
- .stop = xhci_stop,
- .shutdown = xhci_shutdown,
-
- /*
- * managing i/o requests and associated device resources
- */
- .urb_enqueue = xhci_urb_enqueue,
- .urb_dequeue = xhci_urb_dequeue,
- .alloc_dev = xhci_alloc_dev,
- .free_dev = xhci_free_dev,
- .alloc_streams = xhci_alloc_streams,
- .free_streams = xhci_free_streams,
- .add_endpoint = xhci_add_endpoint,
- .drop_endpoint = xhci_drop_endpoint,
- .endpoint_reset = xhci_endpoint_reset,
- .check_bandwidth = xhci_check_bandwidth,
- .reset_bandwidth = xhci_reset_bandwidth,
- .address_device = xhci_address_device,
- .enable_device = xhci_enable_device,
- .update_hub_device = xhci_update_hub_device,
- .reset_device = xhci_discover_or_reset_device,
-
- /*
- * scheduling support
- */
- .get_frame_number = xhci_get_frame,
-
- /* Root hub support */
- .hub_control = xhci_hub_control,
- .hub_status_data = xhci_hub_status_data,
- .bus_suspend = xhci_bus_suspend,
- .bus_resume = xhci_bus_resume,
- /*
- * call back when device connected and addressed
- */
- .update_device = xhci_update_device,
- .set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
- .enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
- .disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
- .find_raw_port_number = xhci_find_raw_port_number,
-};
-
/*-------------------------------------------------------------------------*/
/* PCI driver selection metadata; PCI hotplugging uses this */
@@ -417,6 +357,11 @@
int __init xhci_register_pci(void)
{
+ xhci_init_driver(&xhci_pci_hc_driver, xhci_pci_setup);
+#ifdef CONFIG_PM
+ xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
+ xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+#endif
return pci_register_driver(&xhci_pci_driver);
}