ath5k: cleanup channel to eprom_mode function
Stop returning negative values from ath5k_eeprom_mode_from_channel.
Yell loudly about that case in that function instead and return the
default/zero/mode A. This cleans up the callers, but needs to pass ah
down to ath5k_eeprom_mode_from_channel for ATH5K_WARN. For that
purpose we also need the declaration to be moved to ath5k.h.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 3150def..2d691b8 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1523,7 +1523,8 @@
/* EEPROM access functions */
int ath5k_eeprom_init(struct ath5k_hw *ah);
void ath5k_eeprom_detach(struct ath5k_hw *ah);
-
+int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel);
/* Protocol Control Unit Functions */
/* Helpers */
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index b7e0258..94d34ee 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1779,7 +1779,8 @@
}
int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
{
switch (channel->hw_value) {
case AR5K_MODE_11A:
@@ -1789,6 +1790,7 @@
case AR5K_MODE_11B:
return AR5K_EEPROM_MODE_11B;
default:
- return -1;
+ ATH5K_WARN(ah, "channel is not A/B/G!");
+ return AR5K_EEPROM_MODE_11A;
}
}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index 94a9bbe..693296e 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -493,6 +493,3 @@
/* Antenna raw switch tables */
u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
};
-
-int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index a78afa9..d6bc7cb 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1612,11 +1612,7 @@
ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
- ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
- if (WARN_ON(ee_mode < 0)) {
- ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
- return;
- }
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel);
/* completed NF calibration, test threshold */
nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -2317,12 +2313,7 @@
def_ant = ah->ah_def_ant;
- ee_mode = ath5k_eeprom_mode_from_channel(channel);
- if (ee_mode < 0) {
- ATH5K_ERR(ah,
- "invalid channel: %d\n", channel->center_freq);
- return;
- }
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
switch (ant_mode) {
case AR5K_ANTMODE_DEFAULT:
@@ -3622,12 +3613,7 @@
return -EINVAL;
}
- ee_mode = ath5k_eeprom_mode_from_channel(channel);
- if (ee_mode < 0) {
- ATH5K_ERR(ah,
- "invalid channel: %d\n", channel->center_freq);
- return -EINVAL;
- }
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
/* Initialize TX power table */
switch (ah->ah_radio) {
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index e2d8b2c..a3399c4 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -984,9 +984,7 @@
if (ah->ah_version == AR5K_AR5210)
return;
- ee_mode = ath5k_eeprom_mode_from_channel(channel);
- if (WARN_ON(ee_mode < 0))
- return;
+ ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
/* Adjust power delta for channel 14 */
if (channel->center_freq == 2484)