scsi_transport_srp: Block rport upon TL error even with fast_io_fail_tmo = off
The current behavior of the SRP transport layer when a transport layer
error is encountered is to block SCSI command processing only if
fast_io_fail_tmo != off. The current behavior of the FC transport
layer when a transport layer error is encountered is to block SCSI
command processing no matter which value fast_io_fail_tmo has been set
to. Make the behavior of the SRP transport layer consistent with that
of the FC transport layer to avoid confusion.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
diff --git a/drivers/scsi/scsi_transport_srp.c b/drivers/scsi/scsi_transport_srp.c
index 2700a5a..8b9cb22 100644
--- a/drivers/scsi/scsi_transport_srp.c
+++ b/drivers/scsi/scsi_transport_srp.c
@@ -67,7 +67,8 @@
*
* The combination of the timeout parameters must be such that SCSI commands
* are finished in a reasonable time. Hence do not allow the fast I/O fail
- * timeout to exceed SCSI_DEVICE_BLOCK_MAX_TIMEOUT. Furthermore, these
+ * timeout to exceed SCSI_DEVICE_BLOCK_MAX_TIMEOUT nor allow dev_loss_tmo to
+ * exceed that limit if failing I/O fast has been disabled. Furthermore, these
* parameters must be such that multipath can detect failed paths timely.
* Hence do not allow all three parameters to be disabled simultaneously.
*/
@@ -79,6 +80,9 @@
return -EINVAL;
if (fast_io_fail_tmo > SCSI_DEVICE_BLOCK_MAX_TIMEOUT)
return -EINVAL;
+ if (fast_io_fail_tmo < 0 &&
+ dev_loss_tmo > SCSI_DEVICE_BLOCK_MAX_TIMEOUT)
+ return -EINVAL;
if (dev_loss_tmo >= LONG_MAX / HZ)
return -EINVAL;
if (fast_io_fail_tmo >= 0 && dev_loss_tmo >= 0 &&
@@ -463,20 +467,20 @@
queue_delayed_work(system_long_wq,
&rport->reconnect_work,
1UL * delay * HZ);
- if (fast_io_fail_tmo >= 0 &&
- srp_rport_set_state(rport, SRP_RPORT_BLOCKED) == 0) {
+ if (srp_rport_set_state(rport, SRP_RPORT_BLOCKED) == 0) {
pr_debug("%s new state: %d\n",
dev_name(&shost->shost_gendev),
rport->state);
scsi_target_block(&shost->shost_gendev);
- queue_delayed_work(system_long_wq,
- &rport->fast_io_fail_work,
- 1UL * fast_io_fail_tmo * HZ);
+ if (fast_io_fail_tmo >= 0)
+ queue_delayed_work(system_long_wq,
+ &rport->fast_io_fail_work,
+ 1UL * fast_io_fail_tmo * HZ);
+ if (dev_loss_tmo >= 0)
+ queue_delayed_work(system_long_wq,
+ &rport->dev_loss_work,
+ 1UL * dev_loss_tmo * HZ);
}
- if (dev_loss_tmo >= 0)
- queue_delayed_work(system_long_wq,
- &rport->dev_loss_work,
- 1UL * dev_loss_tmo * HZ);
} else {
pr_debug("%s has already been deleted\n",
dev_name(&shost->shost_gendev));
@@ -578,9 +582,9 @@
spin_unlock_irq(shost->host_lock);
} else if (rport->state == SRP_RPORT_RUNNING) {
/*
- * srp_reconnect_rport() was invoked with fast_io_fail
- * off. Mark the port as failed and start the TL failure
- * timers if these had not yet been started.
+ * srp_reconnect_rport() has been invoked with fast_io_fail
+ * and dev_loss off. Mark the port as failed and start the TL
+ * failure timers if these had not yet been started.
*/
__rport_fail_io_fast(rport);
scsi_target_unblock(&shost->shost_gendev,