ath9k: Cleanup Powersave flags
sc_flags has slowly become a kitchen sink over time.
Move powersave related flags to a separate variable.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 477365e..17b0a6d 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -364,10 +364,10 @@
if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0)
return; /* not from our current AP */
- sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
+ sc->ps_flags &= ~PS_WAIT_FOR_BEACON;
- if (sc->sc_flags & SC_OP_BEACON_SYNC) {
- sc->sc_flags &= ~SC_OP_BEACON_SYNC;
+ if (sc->ps_flags & PS_BEACON_SYNC) {
+ sc->ps_flags &= ~PS_BEACON_SYNC;
ath_print(common, ATH_DBG_PS,
"Reconfigure Beacon timers based on "
"timestamp from the AP\n");
@@ -384,17 +384,17 @@
*/
ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
"buffered broadcast/multicast frame(s)\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
+ sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
return;
}
- if (sc->sc_flags & SC_OP_WAIT_FOR_CAB) {
+ if (sc->ps_flags & PS_WAIT_FOR_CAB) {
/*
* This can happen if a broadcast frame is dropped or the AP
* fails to send a frame indicating that all CAB frames have
* been delivered.
*/
- sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
+ sc->ps_flags &= ~PS_WAIT_FOR_CAB;
ath_print(common, ATH_DBG_PS,
"PS wait for CAB frames timed out\n");
}
@@ -408,10 +408,10 @@
hdr = (struct ieee80211_hdr *)skb->data;
/* Process Beacon and CAB receive in PS state */
- if ((sc->sc_flags & SC_OP_WAIT_FOR_BEACON) &&
+ if ((sc->ps_flags & PS_WAIT_FOR_BEACON) &&
ieee80211_is_beacon(hdr->frame_control))
ath_rx_ps_beacon(sc, skb);
- else if ((sc->sc_flags & SC_OP_WAIT_FOR_CAB) &&
+ else if ((sc->ps_flags & PS_WAIT_FOR_CAB) &&
(ieee80211_is_data(hdr->frame_control) ||
ieee80211_is_action(hdr->frame_control)) &&
is_multicast_ether_addr(hdr->addr1) &&
@@ -420,20 +420,20 @@
* No more broadcast/multicast frames to be received at this
* point.
*/
- sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
+ sc->ps_flags &= ~PS_WAIT_FOR_CAB;
ath_print(common, ATH_DBG_PS,
"All PS CAB frames received, back to sleep\n");
- } else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
+ } else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
- sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
+ sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
ath_print(common, ATH_DBG_PS,
"Going back to sleep after having received "
"PS-Poll data (0x%x)\n",
- sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA |
- SC_OP_WAIT_FOR_TX_ACK));
+ sc->ps_flags & (PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA |
+ PS_WAIT_FOR_TX_ACK));
}
}
@@ -631,9 +631,9 @@
sc->rx.rxotherant = 0;
}
- if (unlikely(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
- SC_OP_WAIT_FOR_CAB |
- SC_OP_WAIT_FOR_PSPOLL_DATA)))
+ if (unlikely(sc->ps_flags & (PS_WAIT_FOR_BEACON |
+ PS_WAIT_FOR_CAB |
+ PS_WAIT_FOR_PSPOLL_DATA)))
ath_rx_ps(sc, skb);
ath_rx_send_to_mac80211(hw, sc, skb, rxs);