| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for the Diolan DLN-2 USB adapter |
| * |
| * Copyright (c) 2014 Intel Corporation |
| * |
| * Derived from: |
| * i2c-diolan-u2c.c |
| * Copyright (c) 2010-2011 Ericsson AB |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/i2c.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/dln2.h> |
| #include <linux/rculist.h> |
| |
| struct dln2_header { |
| __le16 size; |
| __le16 id; |
| __le16 echo; |
| __le16 handle; |
| }; |
| |
| struct dln2_response { |
| struct dln2_header hdr; |
| __le16 result; |
| }; |
| |
| #define DLN2_GENERIC_MODULE_ID 0x00 |
| #define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID) |
| #define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30) |
| #define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31) |
| |
| #define DLN2_HW_ID 0x200 |
| #define DLN2_USB_TIMEOUT 200 /* in ms */ |
| #define DLN2_MAX_RX_SLOTS 16 |
| #define DLN2_MAX_URBS 16 |
| #define DLN2_RX_BUF_SIZE 512 |
| |
| enum dln2_handle { |
| DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */ |
| DLN2_HANDLE_CTRL, |
| DLN2_HANDLE_GPIO, |
| DLN2_HANDLE_I2C, |
| DLN2_HANDLE_SPI, |
| DLN2_HANDLES |
| }; |
| |
| /* |
| * Receive context used between the receive demultiplexer and the transfer |
| * routine. While sending a request the transfer routine will look for a free |
| * receive context and use it to wait for a response and to receive the URB and |
| * thus the response data. |
| */ |
| struct dln2_rx_context { |
| /* completion used to wait for a response */ |
| struct completion done; |
| |
| /* if non-NULL the URB contains the response */ |
| struct urb *urb; |
| |
| /* if true then this context is used to wait for a response */ |
| bool in_use; |
| }; |
| |
| /* |
| * Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the |
| * handle header field to identify the module in dln2_dev.mod_rx_slots and then |
| * the echo header field to index the slots field and find the receive context |
| * for a particular request. |
| */ |
| struct dln2_mod_rx_slots { |
| /* RX slots bitmap */ |
| DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS); |
| |
| /* used to wait for a free RX slot */ |
| wait_queue_head_t wq; |
| |
| /* used to wait for an RX operation to complete */ |
| struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS]; |
| |
| /* avoid races between alloc/free_rx_slot and dln2_rx_transfer */ |
| spinlock_t lock; |
| }; |
| |
| struct dln2_dev { |
| struct usb_device *usb_dev; |
| struct usb_interface *interface; |
| u8 ep_in; |
| u8 ep_out; |
| |
| struct urb *rx_urb[DLN2_MAX_URBS]; |
| void *rx_buf[DLN2_MAX_URBS]; |
| |
| struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES]; |
| |
| struct list_head event_cb_list; |
| spinlock_t event_cb_lock; |
| |
| bool disconnect; |
| int active_transfers; |
| wait_queue_head_t disconnect_wq; |
| spinlock_t disconnect_lock; |
| }; |
| |
| struct dln2_event_cb_entry { |
| struct list_head list; |
| u16 id; |
| struct platform_device *pdev; |
| dln2_event_cb_t callback; |
| }; |
| |
| int dln2_register_event_cb(struct platform_device *pdev, u16 id, |
| dln2_event_cb_t event_cb) |
| { |
| struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent); |
| struct dln2_event_cb_entry *i, *entry; |
| unsigned long flags; |
| int ret = 0; |
| |
| entry = kzalloc(sizeof(*entry), GFP_KERNEL); |
| if (!entry) |
| return -ENOMEM; |
| |
| entry->id = id; |
| entry->callback = event_cb; |
| entry->pdev = pdev; |
| |
| spin_lock_irqsave(&dln2->event_cb_lock, flags); |
| |
| list_for_each_entry(i, &dln2->event_cb_list, list) { |
| if (i->id == id) { |
| ret = -EBUSY; |
| break; |
| } |
| } |
| |
| if (!ret) |
| list_add_rcu(&entry->list, &dln2->event_cb_list); |
| |
| spin_unlock_irqrestore(&dln2->event_cb_lock, flags); |
| |
| if (ret) |
| kfree(entry); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(dln2_register_event_cb); |
| |
| void dln2_unregister_event_cb(struct platform_device *pdev, u16 id) |
| { |
| struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent); |
| struct dln2_event_cb_entry *i; |
| unsigned long flags; |
| bool found = false; |
| |
| spin_lock_irqsave(&dln2->event_cb_lock, flags); |
| |
| list_for_each_entry(i, &dln2->event_cb_list, list) { |
| if (i->id == id) { |
| list_del_rcu(&i->list); |
| found = true; |
| break; |
| } |
| } |
| |
| spin_unlock_irqrestore(&dln2->event_cb_lock, flags); |
| |
| if (found) { |
| synchronize_rcu(); |
| kfree(i); |
| } |
| } |
| EXPORT_SYMBOL(dln2_unregister_event_cb); |
| |
| /* |
| * Returns true if a valid transfer slot is found. In this case the URB must not |
| * be resubmitted immediately in dln2_rx as we need the data when dln2_transfer |
| * is woke up. It will be resubmitted there. |
| */ |
| static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb, |
| u16 handle, u16 rx_slot) |
| { |
| struct device *dev = &dln2->interface->dev; |
| struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; |
| struct dln2_rx_context *rxc; |
| unsigned long flags; |
| bool valid_slot = false; |
| |
| if (rx_slot >= DLN2_MAX_RX_SLOTS) |
| goto out; |
| |
| rxc = &rxs->slots[rx_slot]; |
| |
| spin_lock_irqsave(&rxs->lock, flags); |
| if (rxc->in_use && !rxc->urb) { |
| rxc->urb = urb; |
| complete(&rxc->done); |
| valid_slot = true; |
| } |
| spin_unlock_irqrestore(&rxs->lock, flags); |
| |
| out: |
| if (!valid_slot) |
| dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot); |
| |
| return valid_slot; |
| } |
| |
| static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo, |
| void *data, int len) |
| { |
| struct dln2_event_cb_entry *i; |
| |
| rcu_read_lock(); |
| |
| list_for_each_entry_rcu(i, &dln2->event_cb_list, list) { |
| if (i->id == id) { |
| i->callback(i->pdev, echo, data, len); |
| break; |
| } |
| } |
| |
| rcu_read_unlock(); |
| } |
| |
| static void dln2_rx(struct urb *urb) |
| { |
| struct dln2_dev *dln2 = urb->context; |
| struct dln2_header *hdr = urb->transfer_buffer; |
| struct device *dev = &dln2->interface->dev; |
| u16 id, echo, handle, size; |
| u8 *data; |
| int len; |
| int err; |
| |
| switch (urb->status) { |
| case 0: |
| /* success */ |
| break; |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| case -EPIPE: |
| /* this urb is terminated, clean up */ |
| dev_dbg(dev, "urb shutting down with status %d\n", urb->status); |
| return; |
| default: |
| dev_dbg(dev, "nonzero urb status received %d\n", urb->status); |
| goto out; |
| } |
| |
| if (urb->actual_length < sizeof(struct dln2_header)) { |
| dev_err(dev, "short response: %d\n", urb->actual_length); |
| goto out; |
| } |
| |
| handle = le16_to_cpu(hdr->handle); |
| id = le16_to_cpu(hdr->id); |
| echo = le16_to_cpu(hdr->echo); |
| size = le16_to_cpu(hdr->size); |
| |
| if (size != urb->actual_length) { |
| dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n", |
| handle, id, echo, size, urb->actual_length); |
| goto out; |
| } |
| |
| if (handle >= DLN2_HANDLES) { |
| dev_warn(dev, "invalid handle %d\n", handle); |
| goto out; |
| } |
| |
| data = urb->transfer_buffer + sizeof(struct dln2_header); |
| len = urb->actual_length - sizeof(struct dln2_header); |
| |
| if (handle == DLN2_HANDLE_EVENT) { |
| dln2_run_event_callbacks(dln2, id, echo, data, len); |
| } else { |
| /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */ |
| if (dln2_transfer_complete(dln2, urb, handle, echo)) |
| return; |
| } |
| |
| out: |
| err = usb_submit_urb(urb, GFP_ATOMIC); |
| if (err < 0) |
| dev_err(dev, "failed to resubmit RX URB: %d\n", err); |
| } |
| |
| static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf, |
| int *obuf_len, gfp_t gfp) |
| { |
| int len; |
| void *buf; |
| struct dln2_header *hdr; |
| |
| len = *obuf_len + sizeof(*hdr); |
| buf = kmalloc(len, gfp); |
| if (!buf) |
| return NULL; |
| |
| hdr = (struct dln2_header *)buf; |
| hdr->id = cpu_to_le16(cmd); |
| hdr->size = cpu_to_le16(len); |
| hdr->echo = cpu_to_le16(echo); |
| hdr->handle = cpu_to_le16(handle); |
| |
| memcpy(buf + sizeof(*hdr), obuf, *obuf_len); |
| |
| *obuf_len = len; |
| |
| return buf; |
| } |
| |
| static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo, |
| const void *obuf, int obuf_len) |
| { |
| int ret = 0; |
| int len = obuf_len; |
| void *buf; |
| int actual; |
| |
| buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = usb_bulk_msg(dln2->usb_dev, |
| usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out), |
| buf, len, &actual, DLN2_USB_TIMEOUT); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot) |
| { |
| struct dln2_mod_rx_slots *rxs; |
| unsigned long flags; |
| |
| if (dln2->disconnect) { |
| *slot = -ENODEV; |
| return true; |
| } |
| |
| rxs = &dln2->mod_rx_slots[handle]; |
| |
| spin_lock_irqsave(&rxs->lock, flags); |
| |
| *slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS); |
| |
| if (*slot < DLN2_MAX_RX_SLOTS) { |
| struct dln2_rx_context *rxc = &rxs->slots[*slot]; |
| |
| set_bit(*slot, rxs->bmap); |
| rxc->in_use = true; |
| } |
| |
| spin_unlock_irqrestore(&rxs->lock, flags); |
| |
| return *slot < DLN2_MAX_RX_SLOTS; |
| } |
| |
| static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle) |
| { |
| int ret; |
| int slot; |
| |
| /* |
| * No need to timeout here, the wait is bounded by the timeout in |
| * _dln2_transfer. |
| */ |
| ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq, |
| find_free_slot(dln2, handle, &slot)); |
| if (ret < 0) |
| return ret; |
| |
| return slot; |
| } |
| |
| static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot) |
| { |
| struct dln2_mod_rx_slots *rxs; |
| struct urb *urb = NULL; |
| unsigned long flags; |
| struct dln2_rx_context *rxc; |
| |
| rxs = &dln2->mod_rx_slots[handle]; |
| |
| spin_lock_irqsave(&rxs->lock, flags); |
| |
| clear_bit(slot, rxs->bmap); |
| |
| rxc = &rxs->slots[slot]; |
| rxc->in_use = false; |
| urb = rxc->urb; |
| rxc->urb = NULL; |
| reinit_completion(&rxc->done); |
| |
| spin_unlock_irqrestore(&rxs->lock, flags); |
| |
| if (urb) { |
| int err; |
| struct device *dev = &dln2->interface->dev; |
| |
| err = usb_submit_urb(urb, GFP_KERNEL); |
| if (err < 0) |
| dev_err(dev, "failed to resubmit RX URB: %d\n", err); |
| } |
| |
| wake_up_interruptible(&rxs->wq); |
| } |
| |
| static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd, |
| const void *obuf, unsigned obuf_len, |
| void *ibuf, unsigned *ibuf_len) |
| { |
| int ret = 0; |
| int rx_slot; |
| struct dln2_response *rsp; |
| struct dln2_rx_context *rxc; |
| struct device *dev = &dln2->interface->dev; |
| const unsigned long timeout = msecs_to_jiffies(DLN2_USB_TIMEOUT); |
| struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle]; |
| int size; |
| |
| spin_lock(&dln2->disconnect_lock); |
| if (!dln2->disconnect) |
| dln2->active_transfers++; |
| else |
| ret = -ENODEV; |
| spin_unlock(&dln2->disconnect_lock); |
| |
| if (ret) |
| return ret; |
| |
| rx_slot = alloc_rx_slot(dln2, handle); |
| if (rx_slot < 0) { |
| ret = rx_slot; |
| goto out_decr; |
| } |
| |
| ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len); |
| if (ret < 0) { |
| dev_err(dev, "USB write failed: %d\n", ret); |
| goto out_free_rx_slot; |
| } |
| |
| rxc = &rxs->slots[rx_slot]; |
| |
| ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout); |
| if (ret <= 0) { |
| if (!ret) |
| ret = -ETIMEDOUT; |
| goto out_free_rx_slot; |
| } else { |
| ret = 0; |
| } |
| |
| if (dln2->disconnect) { |
| ret = -ENODEV; |
| goto out_free_rx_slot; |
| } |
| |
| /* if we got here we know that the response header has been checked */ |
| rsp = rxc->urb->transfer_buffer; |
| size = le16_to_cpu(rsp->hdr.size); |
| |
| if (size < sizeof(*rsp)) { |
| ret = -EPROTO; |
| goto out_free_rx_slot; |
| } |
| |
| if (le16_to_cpu(rsp->result) > 0x80) { |
| dev_dbg(dev, "%d received response with error %d\n", |
| handle, le16_to_cpu(rsp->result)); |
| ret = -EREMOTEIO; |
| goto out_free_rx_slot; |
| } |
| |
| if (!ibuf) |
| goto out_free_rx_slot; |
| |
| if (*ibuf_len > size - sizeof(*rsp)) |
| *ibuf_len = size - sizeof(*rsp); |
| |
| memcpy(ibuf, rsp + 1, *ibuf_len); |
| |
| out_free_rx_slot: |
| free_rx_slot(dln2, handle, rx_slot); |
| out_decr: |
| spin_lock(&dln2->disconnect_lock); |
| dln2->active_transfers--; |
| spin_unlock(&dln2->disconnect_lock); |
| if (dln2->disconnect) |
| wake_up(&dln2->disconnect_wq); |
| |
| return ret; |
| } |
| |
| int dln2_transfer(struct platform_device *pdev, u16 cmd, |
| const void *obuf, unsigned obuf_len, |
| void *ibuf, unsigned *ibuf_len) |
| { |
| struct dln2_platform_data *dln2_pdata; |
| struct dln2_dev *dln2; |
| u16 handle; |
| |
| dln2 = dev_get_drvdata(pdev->dev.parent); |
| dln2_pdata = dev_get_platdata(&pdev->dev); |
| handle = dln2_pdata->handle; |
| |
| return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf, |
| ibuf_len); |
| } |
| EXPORT_SYMBOL(dln2_transfer); |
| |
| static int dln2_check_hw(struct dln2_dev *dln2) |
| { |
| int ret; |
| __le32 hw_type; |
| int len = sizeof(hw_type); |
| |
| ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER, |
| NULL, 0, &hw_type, &len); |
| if (ret < 0) |
| return ret; |
| if (len < sizeof(hw_type)) |
| return -EREMOTEIO; |
| |
| if (le32_to_cpu(hw_type) != DLN2_HW_ID) { |
| dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n", |
| le32_to_cpu(hw_type)); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int dln2_print_serialno(struct dln2_dev *dln2) |
| { |
| int ret; |
| __le32 serial_no; |
| int len = sizeof(serial_no); |
| struct device *dev = &dln2->interface->dev; |
| |
| ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0, |
| &serial_no, &len); |
| if (ret < 0) |
| return ret; |
| if (len < sizeof(serial_no)) |
| return -EREMOTEIO; |
| |
| dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no)); |
| |
| return 0; |
| } |
| |
| static int dln2_hw_init(struct dln2_dev *dln2) |
| { |
| int ret; |
| |
| ret = dln2_check_hw(dln2); |
| if (ret < 0) |
| return ret; |
| |
| return dln2_print_serialno(dln2); |
| } |
| |
| static void dln2_free_rx_urbs(struct dln2_dev *dln2) |
| { |
| int i; |
| |
| for (i = 0; i < DLN2_MAX_URBS; i++) { |
| usb_free_urb(dln2->rx_urb[i]); |
| kfree(dln2->rx_buf[i]); |
| } |
| } |
| |
| static void dln2_stop_rx_urbs(struct dln2_dev *dln2) |
| { |
| int i; |
| |
| for (i = 0; i < DLN2_MAX_URBS; i++) |
| usb_kill_urb(dln2->rx_urb[i]); |
| } |
| |
| static void dln2_free(struct dln2_dev *dln2) |
| { |
| dln2_free_rx_urbs(dln2); |
| usb_put_dev(dln2->usb_dev); |
| kfree(dln2); |
| } |
| |
| static int dln2_setup_rx_urbs(struct dln2_dev *dln2, |
| struct usb_host_interface *hostif) |
| { |
| int i; |
| const int rx_max_size = DLN2_RX_BUF_SIZE; |
| |
| for (i = 0; i < DLN2_MAX_URBS; i++) { |
| dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL); |
| if (!dln2->rx_buf[i]) |
| return -ENOMEM; |
| |
| dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL); |
| if (!dln2->rx_urb[i]) |
| return -ENOMEM; |
| |
| usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev, |
| usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in), |
| dln2->rx_buf[i], rx_max_size, dln2_rx, dln2); |
| } |
| |
| return 0; |
| } |
| |
| static int dln2_start_rx_urbs(struct dln2_dev *dln2, gfp_t gfp) |
| { |
| struct device *dev = &dln2->interface->dev; |
| int ret; |
| int i; |
| |
| for (i = 0; i < DLN2_MAX_URBS; i++) { |
| ret = usb_submit_urb(dln2->rx_urb[i], gfp); |
| if (ret < 0) { |
| dev_err(dev, "failed to submit RX URB: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct dln2_platform_data dln2_pdata_gpio = { |
| .handle = DLN2_HANDLE_GPIO, |
| }; |
| |
| /* Only one I2C port seems to be supported on current hardware */ |
| static struct dln2_platform_data dln2_pdata_i2c = { |
| .handle = DLN2_HANDLE_I2C, |
| .port = 0, |
| }; |
| |
| /* Only one SPI port supported */ |
| static struct dln2_platform_data dln2_pdata_spi = { |
| .handle = DLN2_HANDLE_SPI, |
| .port = 0, |
| }; |
| |
| static const struct mfd_cell dln2_devs[] = { |
| { |
| .name = "dln2-gpio", |
| .platform_data = &dln2_pdata_gpio, |
| .pdata_size = sizeof(struct dln2_platform_data), |
| }, |
| { |
| .name = "dln2-i2c", |
| .platform_data = &dln2_pdata_i2c, |
| .pdata_size = sizeof(struct dln2_platform_data), |
| }, |
| { |
| .name = "dln2-spi", |
| .platform_data = &dln2_pdata_spi, |
| .pdata_size = sizeof(struct dln2_platform_data), |
| }, |
| }; |
| |
| static void dln2_stop(struct dln2_dev *dln2) |
| { |
| int i, j; |
| |
| /* don't allow starting new transfers */ |
| spin_lock(&dln2->disconnect_lock); |
| dln2->disconnect = true; |
| spin_unlock(&dln2->disconnect_lock); |
| |
| /* cancel in progress transfers */ |
| for (i = 0; i < DLN2_HANDLES; i++) { |
| struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i]; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&rxs->lock, flags); |
| |
| /* cancel all response waiters */ |
| for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) { |
| struct dln2_rx_context *rxc = &rxs->slots[j]; |
| |
| if (rxc->in_use) |
| complete(&rxc->done); |
| } |
| |
| spin_unlock_irqrestore(&rxs->lock, flags); |
| } |
| |
| /* wait for transfers to end */ |
| wait_event(dln2->disconnect_wq, !dln2->active_transfers); |
| |
| dln2_stop_rx_urbs(dln2); |
| } |
| |
| static void dln2_disconnect(struct usb_interface *interface) |
| { |
| struct dln2_dev *dln2 = usb_get_intfdata(interface); |
| |
| dln2_stop(dln2); |
| |
| mfd_remove_devices(&interface->dev); |
| |
| dln2_free(dln2); |
| } |
| |
| static int dln2_probe(struct usb_interface *interface, |
| const struct usb_device_id *usb_id) |
| { |
| struct usb_host_interface *hostif = interface->cur_altsetting; |
| struct device *dev = &interface->dev; |
| struct dln2_dev *dln2; |
| int ret; |
| int i, j; |
| |
| if (hostif->desc.bInterfaceNumber != 0 || |
| hostif->desc.bNumEndpoints < 2) |
| return -ENODEV; |
| |
| dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL); |
| if (!dln2) |
| return -ENOMEM; |
| |
| dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress; |
| dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress; |
| dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface)); |
| dln2->interface = interface; |
| usb_set_intfdata(interface, dln2); |
| init_waitqueue_head(&dln2->disconnect_wq); |
| |
| for (i = 0; i < DLN2_HANDLES; i++) { |
| init_waitqueue_head(&dln2->mod_rx_slots[i].wq); |
| spin_lock_init(&dln2->mod_rx_slots[i].lock); |
| for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) |
| init_completion(&dln2->mod_rx_slots[i].slots[j].done); |
| } |
| |
| spin_lock_init(&dln2->event_cb_lock); |
| spin_lock_init(&dln2->disconnect_lock); |
| INIT_LIST_HEAD(&dln2->event_cb_list); |
| |
| ret = dln2_setup_rx_urbs(dln2, hostif); |
| if (ret) |
| goto out_free; |
| |
| ret = dln2_start_rx_urbs(dln2, GFP_KERNEL); |
| if (ret) |
| goto out_stop_rx; |
| |
| ret = dln2_hw_init(dln2); |
| if (ret < 0) { |
| dev_err(dev, "failed to initialize hardware\n"); |
| goto out_stop_rx; |
| } |
| |
| ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs)); |
| if (ret != 0) { |
| dev_err(dev, "failed to add mfd devices to core\n"); |
| goto out_stop_rx; |
| } |
| |
| return 0; |
| |
| out_stop_rx: |
| dln2_stop_rx_urbs(dln2); |
| |
| out_free: |
| dln2_free(dln2); |
| |
| return ret; |
| } |
| |
| static int dln2_suspend(struct usb_interface *iface, pm_message_t message) |
| { |
| struct dln2_dev *dln2 = usb_get_intfdata(iface); |
| |
| dln2_stop(dln2); |
| |
| return 0; |
| } |
| |
| static int dln2_resume(struct usb_interface *iface) |
| { |
| struct dln2_dev *dln2 = usb_get_intfdata(iface); |
| |
| dln2->disconnect = false; |
| |
| return dln2_start_rx_urbs(dln2, GFP_NOIO); |
| } |
| |
| static const struct usb_device_id dln2_table[] = { |
| { USB_DEVICE(0xa257, 0x2013) }, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, dln2_table); |
| |
| static struct usb_driver dln2_driver = { |
| .name = "dln2", |
| .probe = dln2_probe, |
| .disconnect = dln2_disconnect, |
| .id_table = dln2_table, |
| .suspend = dln2_suspend, |
| .resume = dln2_resume, |
| }; |
| |
| module_usb_driver(dln2_driver); |
| |
| MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>"); |
| MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter"); |
| MODULE_LICENSE("GPL v2"); |