i40e/i40evf: Add support for GSO partial with UDP_TUNNEL_CSUM and GRE_CSUM
This patch makes it so that i40e and i40evf can use GSO_PARTIAL to support
segmentation for frames with checksums enabled in outer headers. As a
result we can now send data over these types of tunnels at over 20Gb/s
versus the 12Gb/s that was previously possible on my system.
The advantage with the i40e parts is that this offload is mostly
transparent as the hardware still deals with the inner and/or outer IPv4
headers so the IP ID is still incrementing for both when this offload is
performed.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 4633235..ede8dfc 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1566,11 +1566,15 @@
}
if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE |
+ SKB_GSO_GRE_CSUM |
SKB_GSO_IPIP |
SKB_GSO_SIT |
SKB_GSO_UDP_TUNNEL |
SKB_GSO_UDP_TUNNEL_CSUM)) {
- if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM) {
+ if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
+ (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) {
+ l4.udp->len = 0;
+
/* determine offset of outer transport header */
l4_offset = l4.hdr - skb->data;
@@ -1705,6 +1709,7 @@
/* indicate if we need to offload outer UDP header */
if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
+ !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
(skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index b9b1dd8..9f0bd7a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2240,20 +2240,25 @@
NETIF_F_TSO_ECN |
NETIF_F_TSO6 |
NETIF_F_GSO_GRE |
+ NETIF_F_GSO_GRE_CSUM |
NETIF_F_GSO_IPIP |
NETIF_F_GSO_SIT |
NETIF_F_GSO_UDP_TUNNEL |
NETIF_F_GSO_UDP_TUNNEL_CSUM |
+ NETIF_F_GSO_PARTIAL |
NETIF_F_SCTP_CRC |
NETIF_F_RXHASH |
NETIF_F_RXCSUM |
0;
if (!(adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE))
- netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+ netdev->gso_partial_features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+
+ netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
/* record features VLANs can make use of */
- netdev->vlan_features |= netdev->hw_enc_features;
+ netdev->vlan_features |= netdev->hw_enc_features |
+ NETIF_F_TSO_MANGLEID;
/* Write features and hw_features separately to avoid polluting
* with, or dropping, features that are set when we registgered.
@@ -2261,6 +2266,7 @@
netdev->hw_features |= netdev->hw_enc_features;
netdev->features |= netdev->hw_enc_features | I40EVF_VLAN_FEATURES;
+ netdev->hw_enc_features |= NETIF_F_TSO_MANGLEID;
/* disable VLAN features if not supported */
if (!(vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN))