rtlwifi: rtl8192cu: remove _InitBeaconParameters().
_InitBeaconParameters() and rtl92cu_init_beacon_parameters() is
same routine. I remove both functions. then i add
_rtl92cu_init_beacon_parameters() in the hw.c.
_rtl92cu_init_beacon_parameters() is same routine with
_InitBeaconParameters().
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 6a4ef05..767358a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -840,6 +840,26 @@
rtl92c_set_data_filter(hw, value16);
}
+static void _rtl92cu_init_beacon_parameters(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+
+ rtl_write_word(rtlpriv, REG_BCN_CTRL, 0x1010);
+
+ /* TODO: Remove these magic number */
+ rtl_write_word(rtlpriv, REG_TBTT_PROHIBIT, 0x6404);
+ rtl_write_byte(rtlpriv, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);
+ rtl_write_byte(rtlpriv, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME);
+ /* Change beacon AIFS to the largest number
+ * beacause test chip does not contension before sending beacon.
+ */
+ if (IS_NORMAL_CHIP(rtlhal->version))
+ rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660F);
+ else
+ rtl_write_word(rtlpriv, REG_BCNTCFG, 0x66FF);
+}
+
static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -887,7 +907,7 @@
_rtl92cu_init_usb_aggregation(hw);
rtlpriv->cfg->ops->set_bw_mode(hw, NL80211_CHAN_HT20);
rtl92c_set_min_space(hw, IS_92C_SERIAL(rtlhal->version));
- rtl92c_init_beacon_parameters(hw, rtlhal->version);
+ _rtl92cu_init_beacon_parameters(hw);
rtl92c_init_ampdu_aggregation(hw);
rtl92c_init_beacon_max_error(hw);
return err;
@@ -1453,25 +1473,6 @@
return 0;
}
-static void _InitBeaconParameters(struct ieee80211_hw *hw)
-{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
-
- rtl_write_word(rtlpriv, REG_BCN_CTRL, 0x1010);
-
- /* TODO: Remove these magic number */
- rtl_write_word(rtlpriv, REG_TBTT_PROHIBIT, 0x6404);
- rtl_write_byte(rtlpriv, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);
- rtl_write_byte(rtlpriv, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME);
- /* Change beacon AIFS to the largest number
- * beacause test chip does not contension before sending beacon. */
- if (IS_NORMAL_CHIP(rtlhal->version))
- rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660F);
- else
- rtl_write_word(rtlpriv, REG_BCNTCFG, 0x66FF);
-}
-
static void _beacon_function_enable(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1492,7 +1493,7 @@
atim_window = 2; /*FIX MERGE */
rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
- _InitBeaconParameters(hw);
+ _rtl92cu_init_beacon_parameters(hw);
rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
/*
* Force beacon frame transmission even after receiving beacon frame