Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c
new file mode 100644
index 0000000..3db2446
--- /dev/null
+++ b/arch/m68knommu/platform/68360/config.c
@@ -0,0 +1,208 @@
+/*
+ * linux/arch/m68knommu/platform/68360/config.c
+ *
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
+ * Copyright (C) 1993 Hamish Macdonald
+ * Copyright (C) 1999 D. Jeff Dionne <jeff@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <stdarg.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+
+#include <asm/setup.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/irq.h>
+#include <asm/machdep.h>
+#include <asm/m68360.h>
+
+#ifdef CONFIG_UCQUICC
+#include <asm/bootstd.h>
+#endif
+
+extern void m360_cpm_reset(void);
+
+// Mask to select if the PLL prescaler is enabled.
+#define MCU_PREEN ((unsigned short)(0x0001 << 13))
+
+#if defined(CONFIG_UCQUICC)
+#define OSCILLATOR (unsigned long int)33000000
+#endif
+
+unsigned long int system_clock;
+
+void M68360_init_IRQ(void);
+
+extern QUICC *pquicc;
+
+/* TODO DON"T Hard Code this */
+/* calculate properly using the right PLL and prescaller */
+// unsigned int system_clock = 33000000l;
+extern unsigned long int system_clock; //In kernel setup.c
+
+extern void config_M68360_irq(void);
+
+void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *))
+{
+ unsigned char prescaler;
+ unsigned short tgcr_save;
+ int return_value;
+
+#if 0
+ /* Restart mode, Enable int, 32KHz, Enable timer */
+ TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
+ /* Set prescaler (Divide 32KHz by 32)*/
+ TPRER = 31;
+ /* Set compare register 32Khz / 32 / 10 = 100 */
+ TCMP = 10;
+
+ request_irq(IRQ_MACHSPEC | 1, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
+#endif
+
+ /* General purpose quicc timers: MC68360UM p7-20 */
+
+ /* Set up timer 1 (in [1..4]) to do 100Hz */
+ tgcr_save = pquicc->timer_tgcr & 0xfff0;
+ pquicc->timer_tgcr = tgcr_save; /* stop and reset timer 1 */
+ /* pquicc->timer_tgcr |= 0x4444; */ /* halt timers when FREEZE (ie bdm freeze) */
+
+ prescaler = 8;
+ pquicc->timer_tmr1 = 0x001a | /* or=1, frr=1, iclk=01b */
+ (unsigned short)((prescaler - 1) << 8);
+
+ pquicc->timer_tcn1 = 0x0000; /* initial count */
+ /* calculate interval for 100Hz based on the _system_clock: */
+ pquicc->timer_trr1 = (system_clock/ prescaler) / HZ; /* reference count */
+
+ pquicc->timer_ter1 = 0x0003; /* clear timer events */
+
+ /* enable timer 1 interrupt in CIMR */
+// request_irq(IRQ_MACHSPEC | CPMVEC_TIMER1, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
+ //return_value = request_irq( CPMVEC_TIMER1, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
+ return_value = request_irq(CPMVEC_TIMER1 , timer_routine, IRQ_FLG_LOCK,
+ "Timer", NULL);
+
+ /* Start timer 1: */
+ tgcr_save = (pquicc->timer_tgcr & 0xfff0) | 0x0001;
+ pquicc->timer_tgcr = tgcr_save;
+}
+
+
+void BSP_tick(void)
+{
+ /* Reset Timer1 */
+ /* TSTAT &= 0; */
+
+ pquicc->timer_ter1 = 0x0002; /* clear timer event */
+}
+
+unsigned long BSP_gettimeoffset (void)
+{
+ return 0;
+}
+
+void BSP_gettod (int *yearp, int *monp, int *dayp,
+ int *hourp, int *minp, int *secp)
+{
+}
+
+int BSP_hwclk(int op, struct hwclk_time *t)
+{
+ if (!op) {
+ /* read */
+ } else {
+ /* write */
+ }
+ return 0;
+}
+
+int BSP_set_clock_mmss (unsigned long nowtime)
+{
+#if 0
+ short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
+
+ tod->second1 = real_seconds / 10;
+ tod->second2 = real_seconds % 10;
+ tod->minute1 = real_minutes / 10;
+ tod->minute2 = real_minutes % 10;
+#endif
+ return 0;
+}
+
+void BSP_reset (void)
+{
+ local_irq_disable();
+ asm volatile ("
+ moveal #_start, %a0;
+ moveb #0, 0xFFFFF300;
+ moveal 0(%a0), %sp;
+ moveal 4(%a0), %a0;
+ jmp (%a0);
+ ");
+}
+
+unsigned char *scc1_hwaddr;
+static int errno;
+
+#if defined (CONFIG_UCQUICC)
+_bsc0(char *, getserialnum)
+_bsc1(unsigned char *, gethwaddr, int, a)
+_bsc1(char *, getbenv, char *, a)
+#endif
+
+
+void config_BSP(char *command, int len)
+{
+ unsigned char *p;
+
+ m360_cpm_reset();
+
+ /* Calculate the real system clock value. */
+ {
+ unsigned int local_pllcr = (unsigned int)(pquicc->sim_pllcr);
+ if( local_pllcr & MCU_PREEN ) // If the prescaler is dividing by 128
+ {
+ int mf = (int)(pquicc->sim_pllcr & 0x0fff);
+ system_clock = (OSCILLATOR / 128) * (mf + 1);
+ }
+ else
+ {
+ int mf = (int)(pquicc->sim_pllcr & 0x0fff);
+ system_clock = (OSCILLATOR) * (mf + 1);
+ }
+ }
+
+ printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
+
+#if defined(CONFIG_UCQUICC) && 0
+ printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
+ p = scc1_hwaddr = gethwaddr(0);
+ printk(KERN_INFO "uCquicc hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ p[0], p[1], p[2], p[3], p[4], p[5]);
+
+ p = getbenv("APPEND");
+ if (p)
+ strcpy(p,command);
+ else
+ command[0] = 0;
+#else
+ scc1_hwaddr = "\00\01\02\03\04\05";
+#endif
+
+ mach_sched_init = BSP_sched_init;
+ mach_tick = BSP_tick;
+ mach_gettimeoffset = BSP_gettimeoffset;
+ mach_gettod = BSP_gettod;
+ mach_hwclk = NULL;
+ mach_set_clock_mmss = NULL;
+ mach_reset = BSP_reset;
+}