Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/ppc64/oprofile/op_model_rs64.c
new file mode 100644
index 0000000..bcec506
--- /dev/null
+++ b/arch/ppc64/oprofile/op_model_rs64.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+
+#define dbg(args...)
+
+#include "op_impl.h"
+
+static void ctrl_write(unsigned int i, unsigned int val)
+{
+ unsigned int tmp = 0;
+ unsigned long shift = 0, mask = 0;
+
+ dbg("ctrl_write %d %x\n", i, val);
+
+ switch(i) {
+ case 0:
+ tmp = mfspr(SPRN_MMCR0);
+ shift = 6;
+ mask = 0x7F;
+ break;
+ case 1:
+ tmp = mfspr(SPRN_MMCR0);
+ shift = 0;
+ mask = 0x3F;
+ break;
+ case 2:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 4;
+ mask = 0x1F;
+ break;
+ case 3:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 9;
+ mask = 0x1F;
+ break;
+ case 4:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 14;
+ mask = 0x1F;
+ break;
+ case 5:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 19;
+ mask = 0x1F;
+ break;
+ case 6:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 24;
+ mask = 0x1F;
+ break;
+ case 7:
+ tmp = mfspr(SPRN_MMCR1);
+ shift = 31 - 28;
+ mask = 0xF;
+ break;
+ }
+
+ tmp = tmp & ~(mask << shift);
+ tmp |= val << shift;
+
+ switch(i) {
+ case 0:
+ case 1:
+ mtspr(SPRN_MMCR0, tmp);
+ break;
+ default:
+ mtspr(SPRN_MMCR1, tmp);
+ }
+
+ dbg("ctrl_write mmcr0 %lx mmcr1 %lx\n", mfspr(SPRN_MMCR0),
+ mfspr(SPRN_MMCR1));
+}
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int num_counters;
+
+static void rs64_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys,
+ int num_ctrs)
+{
+ int i;
+
+ num_counters = num_ctrs;
+
+ for (i = 0; i < num_counters; ++i)
+ reset_value[i] = 0x80000000UL - ctr[i].count;
+
+ /* XXX setup user and kernel profiling */
+}
+
+static void rs64_cpu_setup(void *unused)
+{
+ unsigned int mmcr0;
+
+ /* reset MMCR0 and set the freeze bit */
+ mmcr0 = MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ /* reset MMCR1, MMCRA */
+ mtspr(SPRN_MMCR1, 0);
+
+ if (cpu_has_feature(CPU_FTR_MMCRA))
+ mtspr(SPRN_MMCRA, 0);
+
+ mmcr0 |= MMCR0_FCM1|MMCR0_PMXE|MMCR0_FCECE;
+ /* Only applies to POWER3, but should be safe on RS64 */
+ mmcr0 |= MMCR0_PMC1CE|MMCR0_PMCjCE;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ dbg("setup on cpu %d, mmcr0 %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCR0));
+ dbg("setup on cpu %d, mmcr1 %lx\n", smp_processor_id(),
+ mfspr(SPRN_MMCR1));
+}
+
+static void rs64_start(struct op_counter_config *ctr)
+{
+ int i;
+ unsigned int mmcr0;
+
+ /* set the PMM bit (see comment below) */
+ mtmsrd(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ if (ctr[i].enabled) {
+ ctr_write(i, reset_value[i]);
+ ctrl_write(i, ctr[i].event);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+
+ /*
+ * now clear the freeze bit, counting will not start until we
+ * rfid from this excetion, because only at that point will
+ * the PMM bit be cleared
+ */
+ mmcr0 &= ~MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ dbg("start on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
+}
+
+static void rs64_stop(void)
+{
+ unsigned int mmcr0;
+
+ /* freeze counters */
+ mmcr0 = mfspr(SPRN_MMCR0);
+ mmcr0 |= MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+
+ dbg("stop on cpu %d, mmcr0 %x\n", smp_processor_id(), mmcr0);
+
+ mb();
+}
+
+static void rs64_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ unsigned int mmcr0;
+ int val;
+ int i;
+ unsigned long pc = mfspr(SPRN_SIAR);
+ int is_kernel = (pc >= KERNELBASE);
+
+ /* set the PMM bit (see comment below) */
+ mtmsrd(mfmsr() | MSR_PMM);
+
+ for (i = 0; i < num_counters; ++i) {
+ val = ctr_read(i);
+ if (val < 0) {
+ if (ctr[i].enabled) {
+ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+ }
+ }
+ }
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+
+ /* reset the perfmon trigger */
+ mmcr0 |= MMCR0_PMXE;
+
+ /*
+ * now clear the freeze bit, counting will not start until we
+ * rfid from this exception, because only at that point will
+ * the PMM bit be cleared
+ */
+ mmcr0 &= ~MMCR0_FC;
+ mtspr(SPRN_MMCR0, mmcr0);
+}
+
+struct op_ppc64_model op_model_rs64 = {
+ .reg_setup = rs64_reg_setup,
+ .cpu_setup = rs64_cpu_setup,
+ .start = rs64_start,
+ .stop = rs64_stop,
+ .handle_interrupt = rs64_handle_interrupt,
+};