Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
new file mode 100644
index 0000000..f7304f0
--- /dev/null
+++ b/drivers/input/keyboard/atkbd.c
@@ -0,0 +1,1148 @@
+/*
+ * AT and PS/2 keyboard driver
+ *
+ * Copyright (c) 1999-2002 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This driver can handle standard AT keyboards and PS/2 keyboards in
+ * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb
+ * input-only controllers and AT keyboards connected over a one way RS232
+ * converter.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/workqueue.h>
+#include <linux/libps2.h>
+
+#define DRIVER_DESC "AT and PS/2 keyboard driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int atkbd_set = 2;
+module_param_named(set, atkbd_set, int, 0);
+MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)");
+
+#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__)
+static int atkbd_reset;
+#else
+static int atkbd_reset = 1;
+#endif
+module_param_named(reset, atkbd_reset, bool, 0);
+MODULE_PARM_DESC(reset, "Reset keyboard during initialization");
+
+static int atkbd_softrepeat;
+module_param_named(softrepeat, atkbd_softrepeat, bool, 0);
+MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat");
+
+static int atkbd_softraw = 1;
+module_param_named(softraw, atkbd_softraw, bool, 0);
+MODULE_PARM_DESC(softraw, "Use software generated rawmode");
+
+static int atkbd_scroll = 1;
+module_param_named(scroll, atkbd_scroll, bool, 0);
+MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
+
+static int atkbd_extra;
+module_param_named(extra, atkbd_extra, bool, 0);
+MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
+
+__obsolete_setup("atkbd_set=");
+__obsolete_setup("atkbd_reset");
+__obsolete_setup("atkbd_softrepeat=");
+
+/*
+ * Scancode to keycode tables. These are just the default setting, and
+ * are loadable via an userland utility.
+ */
+
+static unsigned char atkbd_set2_keycode[512] = {
+
+#ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
+
+/* XXX: need a more general approach */
+
+#include "hpps2atkbd.h" /* include the keyboard scancodes */
+
+#else
+ 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117,
+ 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0,
+ 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183,
+ 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185,
+ 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0,
+ 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85,
+ 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0,
+ 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
+
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125,
+ 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127,
+ 159, 0,115, 0,164, 0, 0,116,158, 0,150,166, 0, 0, 0,142,
+ 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0,
+ 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112,
+ 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0,
+
+ 0, 0, 0, 65, 99,
+#endif
+};
+
+static unsigned char atkbd_set3_keycode[512] = {
+
+ 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60,
+ 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62,
+ 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64,
+ 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66,
+ 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68,
+ 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70,
+ 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104,
+ 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183,
+
+ 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0,
+ 0,139,150,163,165,115,152,150,166,140,160,154,113,114,167,168,
+ 148,149,147,140
+};
+
+static unsigned char atkbd_unxlate_table[128] = {
+ 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
+ 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
+ 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
+ 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3,
+ 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105,
+ 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63,
+ 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111,
+ 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110
+};
+
+#define ATKBD_CMD_SETLEDS 0x10ed
+#define ATKBD_CMD_GSCANSET 0x11f0
+#define ATKBD_CMD_SSCANSET 0x10f0
+#define ATKBD_CMD_GETID 0x02f2
+#define ATKBD_CMD_SETREP 0x10f3
+#define ATKBD_CMD_ENABLE 0x00f4
+#define ATKBD_CMD_RESET_DIS 0x00f5
+#define ATKBD_CMD_SETALL_MBR 0x00fa
+#define ATKBD_CMD_RESET_BAT 0x02ff
+#define ATKBD_CMD_RESEND 0x00fe
+#define ATKBD_CMD_EX_ENABLE 0x10ea
+#define ATKBD_CMD_EX_SETLEDS 0x20eb
+#define ATKBD_CMD_OK_GETID 0x02e8
+
+#define ATKBD_RET_ACK 0xfa
+#define ATKBD_RET_NAK 0xfe
+#define ATKBD_RET_BAT 0xaa
+#define ATKBD_RET_EMUL0 0xe0
+#define ATKBD_RET_EMUL1 0xe1
+#define ATKBD_RET_RELEASE 0xf0
+#define ATKBD_RET_HANGUEL 0xf1
+#define ATKBD_RET_HANJA 0xf2
+#define ATKBD_RET_ERR 0xff
+
+#define ATKBD_KEY_UNKNOWN 0
+#define ATKBD_KEY_NULL 255
+
+#define ATKBD_SCR_1 254
+#define ATKBD_SCR_2 253
+#define ATKBD_SCR_4 252
+#define ATKBD_SCR_8 251
+#define ATKBD_SCR_CLICK 250
+#define ATKBD_SCR_LEFT 249
+#define ATKBD_SCR_RIGHT 248
+
+#define ATKBD_SPECIAL 248
+
+static struct {
+ unsigned char keycode;
+ unsigned char set2;
+} atkbd_scroll_keys[] = {
+ { ATKBD_SCR_1, 0xc5 },
+ { ATKBD_SCR_2, 0xa9 },
+ { ATKBD_SCR_4, 0xb6 },
+ { ATKBD_SCR_8, 0xa7 },
+ { ATKBD_SCR_CLICK, 0xe0 },
+ { ATKBD_SCR_LEFT, 0xcb },
+ { ATKBD_SCR_RIGHT, 0xd2 },
+};
+
+/*
+ * The atkbd control structure
+ */
+
+struct atkbd {
+
+ struct ps2dev ps2dev;
+
+ /* Written only during init */
+ char name[64];
+ char phys[32];
+ struct input_dev dev;
+
+ unsigned short id;
+ unsigned char keycode[512];
+ unsigned char set;
+ unsigned char translated;
+ unsigned char extra;
+ unsigned char write;
+ unsigned char softrepeat;
+ unsigned char softraw;
+ unsigned char scroll;
+ unsigned char enabled;
+
+ /* Accessed only from interrupt */
+ unsigned char emul;
+ unsigned char resend;
+ unsigned char release;
+ unsigned char bat_xl;
+ unsigned int last;
+ unsigned long time;
+};
+
+static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
+ ssize_t (*handler)(struct atkbd *, char *));
+static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
+ ssize_t (*handler)(struct atkbd *, const char *, size_t));
+#define ATKBD_DEFINE_ATTR(_name) \
+static ssize_t atkbd_show_##_name(struct atkbd *, char *); \
+static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \
+static ssize_t atkbd_do_show_##_name(struct device *d, char *b) \
+{ \
+ return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \
+} \
+static ssize_t atkbd_do_set_##_name(struct device *d, const char *b, size_t s) \
+{ \
+ return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \
+} \
+static struct device_attribute atkbd_attr_##_name = \
+ __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name);
+
+ATKBD_DEFINE_ATTR(extra);
+ATKBD_DEFINE_ATTR(scroll);
+ATKBD_DEFINE_ATTR(set);
+ATKBD_DEFINE_ATTR(softrepeat);
+ATKBD_DEFINE_ATTR(softraw);
+
+
+static void atkbd_report_key(struct input_dev *dev, struct pt_regs *regs, int code, int value)
+{
+ input_regs(dev, regs);
+ if (value == 3) {
+ input_report_key(dev, code, 1);
+ input_sync(dev);
+ input_report_key(dev, code, 0);
+ } else
+ input_event(dev, EV_KEY, code, value);
+ input_sync(dev);
+}
+
+/*
+ * atkbd_interrupt(). Here takes place processing of data received from
+ * the keyboard into events.
+ */
+
+static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
+ unsigned int flags, struct pt_regs *regs)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ unsigned int code = data;
+ int scroll = 0, hscroll = 0, click = -1;
+ int value;
+
+#ifdef ATKBD_DEBUG
+ printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
+#endif
+
+#if !defined(__i386__) && !defined (__x86_64__)
+ if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
+ printk(KERN_WARNING "atkbd.c: frame/parity error: %02x\n", flags);
+ serio_write(serio, ATKBD_CMD_RESEND);
+ atkbd->resend = 1;
+ goto out;
+ }
+
+ if (!flags && data == ATKBD_RET_ACK)
+ atkbd->resend = 0;
+#endif
+
+ if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
+ if (ps2_handle_ack(&atkbd->ps2dev, data))
+ goto out;
+
+ if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD))
+ if (ps2_handle_response(&atkbd->ps2dev, data))
+ goto out;
+
+ if (!atkbd->enabled)
+ goto out;
+
+ input_event(&atkbd->dev, EV_MSC, MSC_RAW, code);
+
+ if (atkbd->translated) {
+
+ if (atkbd->emul ||
+ !(code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1 ||
+ code == ATKBD_RET_HANGUEL || code == ATKBD_RET_HANJA ||
+ code == ATKBD_RET_ERR ||
+ (code == ATKBD_RET_BAT && !atkbd->bat_xl))) {
+ atkbd->release = code >> 7;
+ code &= 0x7f;
+ }
+
+ if (!atkbd->emul &&
+ (code & 0x7f) == (ATKBD_RET_BAT & 0x7f))
+ atkbd->bat_xl = !atkbd->release;
+ }
+
+ switch (code) {
+ case ATKBD_RET_BAT:
+ atkbd->enabled = 0;
+ serio_rescan(atkbd->ps2dev.serio);
+ goto out;
+ case ATKBD_RET_EMUL0:
+ atkbd->emul = 1;
+ goto out;
+ case ATKBD_RET_EMUL1:
+ atkbd->emul = 2;
+ goto out;
+ case ATKBD_RET_RELEASE:
+ atkbd->release = 1;
+ goto out;
+ case ATKBD_RET_HANGUEL:
+ atkbd_report_key(&atkbd->dev, regs, KEY_HANGUEL, 3);
+ goto out;
+ case ATKBD_RET_HANJA:
+ atkbd_report_key(&atkbd->dev, regs, KEY_HANJA, 3);
+ goto out;
+ case ATKBD_RET_ERR:
+ printk(KERN_DEBUG "atkbd.c: Keyboard on %s reports too many keys pressed.\n", serio->phys);
+ goto out;
+ }
+
+ if (atkbd->set != 3)
+ code = (code & 0x7f) | ((code & 0x80) << 1);
+ if (atkbd->emul) {
+ if (--atkbd->emul)
+ goto out;
+ code |= (atkbd->set != 3) ? 0x80 : 0x100;
+ }
+
+ if (atkbd->keycode[code] != ATKBD_KEY_NULL)
+ input_event(&atkbd->dev, EV_MSC, MSC_SCAN, code);
+
+ switch (atkbd->keycode[code]) {
+ case ATKBD_KEY_NULL:
+ break;
+ case ATKBD_KEY_UNKNOWN:
+ if (data == ATKBD_RET_ACK || data == ATKBD_RET_NAK) {
+ printk(KERN_WARNING "atkbd.c: Spurious %s on %s. Some program, "
+ "like XFree86, might be trying access hardware directly.\n",
+ data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
+ } else {
+ printk(KERN_WARNING "atkbd.c: Unknown key %s "
+ "(%s set %d, code %#x on %s).\n",
+ atkbd->release ? "released" : "pressed",
+ atkbd->translated ? "translated" : "raw",
+ atkbd->set, code, serio->phys);
+ printk(KERN_WARNING "atkbd.c: Use 'setkeycodes %s%02x <keycode>' "
+ "to make it known.\n",
+ code & 0x80 ? "e0" : "", code & 0x7f);
+ }
+ input_sync(&atkbd->dev);
+ break;
+ case ATKBD_SCR_1:
+ scroll = 1 - atkbd->release * 2;
+ break;
+ case ATKBD_SCR_2:
+ scroll = 2 - atkbd->release * 4;
+ break;
+ case ATKBD_SCR_4:
+ scroll = 4 - atkbd->release * 8;
+ break;
+ case ATKBD_SCR_8:
+ scroll = 8 - atkbd->release * 16;
+ break;
+ case ATKBD_SCR_CLICK:
+ click = !atkbd->release;
+ break;
+ case ATKBD_SCR_LEFT:
+ hscroll = -1;
+ break;
+ case ATKBD_SCR_RIGHT:
+ hscroll = 1;
+ break;
+ default:
+ value = atkbd->release ? 0 :
+ (1 + (!atkbd->softrepeat && test_bit(atkbd->keycode[code], atkbd->dev.key)));
+
+ switch (value) { /* Workaround Toshiba laptop multiple keypress */
+ case 0:
+ atkbd->last = 0;
+ break;
+ case 1:
+ atkbd->last = code;
+ atkbd->time = jiffies + msecs_to_jiffies(atkbd->dev.rep[REP_DELAY]) / 2;
+ break;
+ case 2:
+ if (!time_after(jiffies, atkbd->time) && atkbd->last == code)
+ value = 1;
+ break;
+ }
+
+ atkbd_report_key(&atkbd->dev, regs, atkbd->keycode[code], value);
+ }
+
+ if (atkbd->scroll) {
+ input_regs(&atkbd->dev, regs);
+ if (click != -1)
+ input_report_key(&atkbd->dev, BTN_MIDDLE, click);
+ input_report_rel(&atkbd->dev, REL_WHEEL, scroll);
+ input_report_rel(&atkbd->dev, REL_HWHEEL, hscroll);
+ input_sync(&atkbd->dev);
+ }
+
+ atkbd->release = 0;
+out:
+ return IRQ_HANDLED;
+}
+
+/*
+ * Event callback from the input module. Events that change the state of
+ * the hardware are processed here.
+ */
+
+static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ struct atkbd *atkbd = dev->private;
+ const short period[32] =
+ { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125,
+ 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 };
+ const short delay[4] =
+ { 250, 500, 750, 1000 };
+ unsigned char param[2];
+ int i, j;
+
+ if (!atkbd->write)
+ return -1;
+
+ switch (type) {
+
+ case EV_LED:
+
+ param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0)
+ | (test_bit(LED_NUML, dev->led) ? 2 : 0)
+ | (test_bit(LED_CAPSL, dev->led) ? 4 : 0);
+ ps2_schedule_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS);
+
+ if (atkbd->extra) {
+ param[0] = 0;
+ param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0)
+ | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0)
+ | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0)
+ | (test_bit(LED_MISC, dev->led) ? 0x10 : 0)
+ | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0);
+ ps2_schedule_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS);
+ }
+
+ return 0;
+
+
+ case EV_REP:
+
+ if (atkbd->softrepeat) return 0;
+
+ i = j = 0;
+ while (i < 32 && period[i] < dev->rep[REP_PERIOD]) i++;
+ while (j < 4 && delay[j] < dev->rep[REP_DELAY]) j++;
+ dev->rep[REP_PERIOD] = period[i];
+ dev->rep[REP_DELAY] = delay[j];
+ param[0] = i | (j << 5);
+ ps2_schedule_command(&atkbd->ps2dev, param, ATKBD_CMD_SETREP);
+
+ return 0;
+ }
+
+ return -1;
+}
+
+/*
+ * atkbd_enable() signals that interrupt handler is allowed to
+ * generate input events.
+ */
+
+static inline void atkbd_enable(struct atkbd *atkbd)
+{
+ serio_pause_rx(atkbd->ps2dev.serio);
+ atkbd->enabled = 1;
+ serio_continue_rx(atkbd->ps2dev.serio);
+}
+
+/*
+ * atkbd_disable() tells input handler that all incoming data except
+ * for ACKs and command response should be dropped.
+ */
+
+static inline void atkbd_disable(struct atkbd *atkbd)
+{
+ serio_pause_rx(atkbd->ps2dev.serio);
+ atkbd->enabled = 0;
+ serio_continue_rx(atkbd->ps2dev.serio);
+}
+
+/*
+ * atkbd_probe() probes for an AT keyboard on a serio port.
+ */
+
+static int atkbd_probe(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+ unsigned char param[2];
+
+/*
+ * Some systems, where the bit-twiddling when testing the io-lines of the
+ * controller may confuse the keyboard need a full reset of the keyboard. On
+ * these systems the BIOS also usually doesn't do it for us.
+ */
+
+ if (atkbd_reset)
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT))
+ printk(KERN_WARNING "atkbd.c: keyboard reset failed on %s\n", ps2dev->serio->phys);
+
+/*
+ * Then we check the keyboard ID. We should get 0xab83 under normal conditions.
+ * Some keyboards report different values, but the first byte is always 0xab or
+ * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this
+ * should make sure we don't try to set the LEDs on it.
+ */
+
+ param[0] = param[1] = 0xa5; /* initialize with invalid values */
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) {
+
+/*
+ * If the get ID command failed, we check if we can at least set the LEDs on
+ * the keyboard. This should work on every keyboard out there. It also turns
+ * the LEDs off, which we want anyway.
+ */
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+ atkbd->id = 0xabba;
+ return 0;
+ }
+
+ if (param[0] != 0xab && param[0] != 0xac && /* Regular and NCD Sun keyboards */
+ param[0] != 0x2b && param[0] != 0x5d && /* Trust keyboard, raw and translated */
+ param[0] != 0x60 && param[0] != 0x47) /* NMB SGI keyboard, raw and translated */
+ return -1;
+
+ atkbd->id = (param[0] << 8) | param[1];
+
+ if (atkbd->id == 0xaca1 && atkbd->translated) {
+ printk(KERN_ERR "atkbd.c: NCD terminal keyboards are only supported on non-translating\n");
+ printk(KERN_ERR "atkbd.c: controllers. Use i8042.direct=1 to disable translation.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * atkbd_select_set checks if a keyboard has a working Set 3 support, and
+ * sets it into that. Unfortunately there are keyboards that can be switched
+ * to Set 3, but don't work well in that (BTC Multimedia ...)
+ */
+
+static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+ unsigned char param[2];
+
+ atkbd->extra = 0;
+/*
+ * For known special keyboards we can go ahead and set the correct set.
+ * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and
+ * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards.
+ */
+
+ if (atkbd->translated)
+ return 2;
+
+ if (atkbd->id == 0xaca1) {
+ param[0] = 3;
+ ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET);
+ return 3;
+ }
+
+ if (allow_extra) {
+ param[0] = 0x71;
+ if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) {
+ atkbd->extra = 1;
+ return 2;
+ }
+ }
+
+ if (target_set != 3)
+ return 2;
+
+ if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) {
+ atkbd->id = param[0] << 8 | param[1];
+ return 2;
+ }
+
+ param[0] = 3;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
+ return 2;
+
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET))
+ return 2;
+
+ if (param[0] != 3) {
+ param[0] = 2;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET))
+ return 2;
+ }
+
+ ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR);
+
+ return 3;
+}
+
+static int atkbd_activate(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+ unsigned char param[1];
+
+/*
+ * Set the LEDs to a defined state.
+ */
+
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+
+/*
+ * Set autorepeat to fastest possible.
+ */
+
+ param[0] = 0;
+ if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
+ return -1;
+
+/*
+ * Enable the keyboard to receive keystrokes.
+ */
+
+ if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) {
+ printk(KERN_ERR "atkbd.c: Failed to enable keyboard on %s\n",
+ ps2dev->serio->phys);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a
+ * reboot.
+ */
+
+static void atkbd_cleanup(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
+}
+
+
+/*
+ * atkbd_disconnect() closes and frees.
+ */
+
+static void atkbd_disconnect(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ atkbd_disable(atkbd);
+
+ /* make sure we don't have a command in flight */
+ synchronize_kernel();
+ flush_scheduled_work();
+
+ device_remove_file(&serio->dev, &atkbd_attr_extra);
+ device_remove_file(&serio->dev, &atkbd_attr_scroll);
+ device_remove_file(&serio->dev, &atkbd_attr_set);
+ device_remove_file(&serio->dev, &atkbd_attr_softrepeat);
+ device_remove_file(&serio->dev, &atkbd_attr_softraw);
+
+ input_unregister_device(&atkbd->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(atkbd);
+}
+
+
+/*
+ * atkbd_set_device_attrs() initializes keyboard's keycode table
+ * according to the selected scancode set
+ */
+
+static void atkbd_set_keycode_table(struct atkbd *atkbd)
+{
+ int i, j;
+
+ memset(atkbd->keycode, 0, sizeof(atkbd->keycode));
+
+ if (atkbd->translated) {
+ for (i = 0; i < 128; i++) {
+ atkbd->keycode[i] = atkbd_set2_keycode[atkbd_unxlate_table[i]];
+ atkbd->keycode[i | 0x80] = atkbd_set2_keycode[atkbd_unxlate_table[i] | 0x80];
+ if (atkbd->scroll)
+ for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++)
+ if ((atkbd_unxlate_table[i] | 0x80) == atkbd_scroll_keys[j].set2)
+ atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode;
+ }
+ } else if (atkbd->set == 3) {
+ memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode));
+ } else {
+ memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode));
+
+ if (atkbd->scroll)
+ for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++)
+ atkbd->keycode[atkbd_scroll_keys[i].set2] = atkbd_scroll_keys[i].keycode;
+ }
+}
+
+/*
+ * atkbd_set_device_attrs() sets up keyboard's input device structure
+ */
+
+static void atkbd_set_device_attrs(struct atkbd *atkbd)
+{
+ int i;
+
+ memset(&atkbd->dev, 0, sizeof(struct input_dev));
+
+ init_input_dev(&atkbd->dev);
+
+ atkbd->dev.name = atkbd->name;
+ atkbd->dev.phys = atkbd->phys;
+ atkbd->dev.id.bustype = BUS_I8042;
+ atkbd->dev.id.vendor = 0x0001;
+ atkbd->dev.id.product = atkbd->translated ? 1 : atkbd->set;
+ atkbd->dev.id.version = atkbd->id;
+ atkbd->dev.event = atkbd_event;
+ atkbd->dev.private = atkbd;
+ atkbd->dev.dev = &atkbd->ps2dev.serio->dev;
+
+ atkbd->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_MSC);
+
+ if (atkbd->write) {
+ atkbd->dev.evbit[0] |= BIT(EV_LED);
+ atkbd->dev.ledbit[0] = BIT(LED_NUML) | BIT(LED_CAPSL) | BIT(LED_SCROLLL);
+ }
+
+ if (atkbd->extra)
+ atkbd->dev.ledbit[0] |= BIT(LED_COMPOSE) | BIT(LED_SUSPEND) |
+ BIT(LED_SLEEP) | BIT(LED_MUTE) | BIT(LED_MISC);
+
+ if (!atkbd->softrepeat) {
+ atkbd->dev.rep[REP_DELAY] = 250;
+ atkbd->dev.rep[REP_PERIOD] = 33;
+ }
+
+ atkbd->dev.mscbit[0] = atkbd->softraw ? BIT(MSC_SCAN) : BIT(MSC_RAW) | BIT(MSC_SCAN);
+
+ if (atkbd->scroll) {
+ atkbd->dev.evbit[0] |= BIT(EV_REL);
+ atkbd->dev.relbit[0] = BIT(REL_WHEEL) | BIT(REL_HWHEEL);
+ set_bit(BTN_MIDDLE, atkbd->dev.keybit);
+ }
+
+ atkbd->dev.keycode = atkbd->keycode;
+ atkbd->dev.keycodesize = sizeof(unsigned char);
+ atkbd->dev.keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
+
+ for (i = 0; i < 512; i++)
+ if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
+ set_bit(atkbd->keycode[i], atkbd->dev.keybit);
+}
+
+/*
+ * atkbd_connect() is called when the serio module finds an interface
+ * that isn't handled yet by an appropriate device driver. We check if
+ * there is an AT keyboard out there and if yes, we register ourselves
+ * to the input module.
+ */
+
+static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct atkbd *atkbd;
+ int err;
+
+ if (!(atkbd = kmalloc(sizeof(struct atkbd), GFP_KERNEL)))
+ return - ENOMEM;
+
+ memset(atkbd, 0, sizeof(struct atkbd));
+
+ ps2_init(&atkbd->ps2dev, serio);
+
+ switch (serio->id.type) {
+
+ case SERIO_8042_XL:
+ atkbd->translated = 1;
+ case SERIO_8042:
+ if (serio->write)
+ atkbd->write = 1;
+ break;
+ }
+
+ atkbd->softraw = atkbd_softraw;
+ atkbd->softrepeat = atkbd_softrepeat;
+ atkbd->scroll = atkbd_scroll;
+
+ if (!atkbd->write)
+ atkbd->softrepeat = 1;
+
+ if (atkbd->softrepeat)
+ atkbd->softraw = 1;
+
+ serio_set_drvdata(serio, atkbd);
+
+ err = serio_open(serio, drv);
+ if (err) {
+ serio_set_drvdata(serio, NULL);
+ kfree(atkbd);
+ return err;
+ }
+
+ if (atkbd->write) {
+
+ if (atkbd_probe(atkbd)) {
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(atkbd);
+ return -ENODEV;
+ }
+
+ atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
+ atkbd_activate(atkbd);
+
+ } else {
+ atkbd->set = 2;
+ atkbd->id = 0xab00;
+ }
+
+ if (atkbd->extra)
+ sprintf(atkbd->name, "AT Set 2 Extra keyboard");
+ else
+ sprintf(atkbd->name, "AT %s Set %d keyboard",
+ atkbd->translated ? "Translated" : "Raw", atkbd->set);
+
+ sprintf(atkbd->phys, "%s/input0", serio->phys);
+
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+
+ input_register_device(&atkbd->dev);
+
+ device_create_file(&serio->dev, &atkbd_attr_extra);
+ device_create_file(&serio->dev, &atkbd_attr_scroll);
+ device_create_file(&serio->dev, &atkbd_attr_set);
+ device_create_file(&serio->dev, &atkbd_attr_softrepeat);
+ device_create_file(&serio->dev, &atkbd_attr_softraw);
+
+ atkbd_enable(atkbd);
+
+ printk(KERN_INFO "input: %s on %s\n", atkbd->name, serio->phys);
+
+ return 0;
+}
+
+/*
+ * atkbd_reconnect() tries to restore keyboard into a sane state and is
+ * most likely called on resume.
+ */
+
+static int atkbd_reconnect(struct serio *serio)
+{
+ struct atkbd *atkbd = serio_get_drvdata(serio);
+ struct serio_driver *drv = serio->drv;
+ unsigned char param[1];
+
+ if (!atkbd || !drv) {
+ printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n");
+ return -1;
+ }
+
+ atkbd_disable(atkbd);
+
+ if (atkbd->write) {
+ param[0] = (test_bit(LED_SCROLLL, atkbd->dev.led) ? 1 : 0)
+ | (test_bit(LED_NUML, atkbd->dev.led) ? 2 : 0)
+ | (test_bit(LED_CAPSL, atkbd->dev.led) ? 4 : 0);
+
+ if (atkbd_probe(atkbd))
+ return -1;
+ if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra))
+ return -1;
+
+ atkbd_activate(atkbd);
+
+ if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS))
+ return -1;
+ }
+
+ atkbd_enable(atkbd);
+
+ return 0;
+}
+
+static struct serio_device_id atkbd_serio_ids[] = {
+ {
+ .type = SERIO_8042,
+ .proto = SERIO_ANY,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ {
+ .type = SERIO_8042_XL,
+ .proto = SERIO_ANY,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_PS2SER,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, atkbd_serio_ids);
+
+static struct serio_driver atkbd_drv = {
+ .driver = {
+ .name = "atkbd",
+ },
+ .description = DRIVER_DESC,
+ .id_table = atkbd_serio_ids,
+ .interrupt = atkbd_interrupt,
+ .connect = atkbd_connect,
+ .reconnect = atkbd_reconnect,
+ .disconnect = atkbd_disconnect,
+ .cleanup = atkbd_cleanup,
+};
+
+static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
+ ssize_t (*handler)(struct atkbd *, char *))
+{
+ struct serio *serio = to_serio_port(dev);
+ int retval;
+
+ retval = serio_pin_driver(serio);
+ if (retval)
+ return retval;
+
+ if (serio->drv != &atkbd_drv) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ retval = handler((struct atkbd *)serio_get_drvdata(serio), buf);
+
+out:
+ serio_unpin_driver(serio);
+ return retval;
+}
+
+static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count,
+ ssize_t (*handler)(struct atkbd *, const char *, size_t))
+{
+ struct serio *serio = to_serio_port(dev);
+ struct atkbd *atkbd;
+ int retval;
+
+ retval = serio_pin_driver(serio);
+ if (retval)
+ return retval;
+
+ if (serio->drv != &atkbd_drv) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ atkbd = serio_get_drvdata(serio);
+ atkbd_disable(atkbd);
+ retval = handler(atkbd, buf, count);
+ atkbd_enable(atkbd);
+
+out:
+ serio_unpin_driver(serio);
+ return retval;
+}
+
+static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0);
+}
+
+static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ unsigned long value;
+ char *rest;
+
+ if (!atkbd->write)
+ return -EIO;
+
+ value = simple_strtoul(buf, &rest, 10);
+ if (*rest || value > 1)
+ return -EINVAL;
+
+ if (atkbd->extra != value) {
+ /* unregister device as it's properties will change */
+ input_unregister_device(&atkbd->dev);
+ atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
+ atkbd_activate(atkbd);
+ atkbd_set_device_attrs(atkbd);
+ input_register_device(&atkbd->dev);
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0);
+}
+
+static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ unsigned long value;
+ char *rest;
+
+ value = simple_strtoul(buf, &rest, 10);
+ if (*rest || value > 1)
+ return -EINVAL;
+
+ if (atkbd->scroll != value) {
+ /* unregister device as it's properties will change */
+ input_unregister_device(&atkbd->dev);
+ atkbd->scroll = value;
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+ input_register_device(&atkbd->dev);
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->set);
+}
+
+static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ unsigned long value;
+ char *rest;
+
+ if (!atkbd->write)
+ return -EIO;
+
+ value = simple_strtoul(buf, &rest, 10);
+ if (*rest || (value != 2 && value != 3))
+ return -EINVAL;
+
+ if (atkbd->set != value) {
+ /* unregister device as it's properties will change */
+ input_unregister_device(&atkbd->dev);
+ atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+ atkbd_activate(atkbd);
+ atkbd_set_keycode_table(atkbd);
+ atkbd_set_device_attrs(atkbd);
+ input_register_device(&atkbd->dev);
+ }
+ return count;
+}
+
+static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0);
+}
+
+static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ unsigned long value;
+ char *rest;
+
+ if (!atkbd->write)
+ return -EIO;
+
+ value = simple_strtoul(buf, &rest, 10);
+ if (*rest || value > 1)
+ return -EINVAL;
+
+ if (atkbd->softrepeat != value) {
+ /* unregister device as it's properties will change */
+ input_unregister_device(&atkbd->dev);
+ atkbd->softrepeat = value;
+ if (atkbd->softrepeat)
+ atkbd->softraw = 1;
+ atkbd_set_device_attrs(atkbd);
+ input_register_device(&atkbd->dev);
+ }
+
+ return count;
+}
+
+
+static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf)
+{
+ return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0);
+}
+
+static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count)
+{
+ unsigned long value;
+ char *rest;
+
+ value = simple_strtoul(buf, &rest, 10);
+ if (*rest || value > 1)
+ return -EINVAL;
+
+ if (atkbd->softraw != value) {
+ /* unregister device as it's properties will change */
+ input_unregister_device(&atkbd->dev);
+ atkbd->softraw = value;
+ atkbd_set_device_attrs(atkbd);
+ input_register_device(&atkbd->dev);
+ }
+ return count;
+}
+
+
+static int __init atkbd_init(void)
+{
+ serio_register_driver(&atkbd_drv);
+ return 0;
+}
+
+static void __exit atkbd_exit(void)
+{
+ serio_unregister_driver(&atkbd_drv);
+}
+
+module_init(atkbd_init);
+module_exit(atkbd_exit);