Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h
new file mode 100644
index 0000000..32a1019
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_dev.h
@@ -0,0 +1,216 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ISLPCI_DEV_H
+#define _ISLPCI_DEV_H
+
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/list.h>
+
+#include "isl_38xx.h"
+#include "isl_oid.h"
+#include "islpci_mgt.h"
+
+/* some states might not be superflous and may be removed when
+ design is finalized (hvr) */
+typedef enum {
+ PRV_STATE_OFF = 0, /* this means hw_unavailable is != 0 */
+ PRV_STATE_PREBOOT, /* we are in a pre-boot state (empty RAM) */
+ PRV_STATE_BOOT, /* boot state (fw upload, run fw) */
+ PRV_STATE_POSTBOOT, /* after boot state, need reset now */
+ PRV_STATE_PREINIT, /* pre-init state */
+ PRV_STATE_INIT, /* init state (restore MIB backup to device) */
+ PRV_STATE_READY, /* driver&device are in operational state */
+ PRV_STATE_SLEEP /* device in sleep mode */
+} islpci_state_t;
+
+/* ACL using MAC address */
+struct mac_entry {
+ struct list_head _list;
+ char addr[ETH_ALEN];
+};
+
+struct islpci_acl {
+ enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
+ struct list_head mac_list; /* a list of mac_entry */
+ int size; /* size of queue */
+ struct semaphore sem; /* accessed in ioctls and trap_work */
+};
+
+struct islpci_membuf {
+ int size; /* size of memory */
+ void *mem; /* address of memory as seen by CPU */
+ dma_addr_t pci_addr; /* address of memory as seen by device */
+};
+
+#define MAX_BSS_WPA_IE_COUNT 64
+#define MAX_WPA_IE_LEN 64
+struct islpci_bss_wpa_ie {
+ struct list_head list;
+ unsigned long last_update;
+ u8 bssid[ETH_ALEN];
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+
+};
+
+typedef struct {
+ spinlock_t slock; /* generic spinlock; */
+
+ u32 priv_oid;
+
+ /* our mib cache */
+ u32 iw_mode;
+ struct rw_semaphore mib_sem;
+ void **mib;
+ char nickname[IW_ESSID_MAX_SIZE+1];
+
+ /* Take care of the wireless stats */
+ struct work_struct stats_work;
+ struct semaphore stats_sem;
+ /* remember when we last updated the stats */
+ unsigned long stats_timestamp;
+ /* The first is accessed under semaphore locking.
+ * The second is the clean one we return to iwconfig.
+ */
+ struct iw_statistics local_iwstatistics;
+ struct iw_statistics iwstatistics;
+
+ struct iw_spy_data spy_data; /* iwspy support */
+
+#if WIRELESS_EXT > 16
+ struct iw_public_data wireless_data;
+#endif /* WIRELESS_EXT > 16 */
+
+ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
+
+ struct islpci_acl acl;
+
+ /* PCI bus allocation & configuration members */
+ struct pci_dev *pdev; /* PCI structure information */
+ char firmware[33];
+
+ void __iomem *device_base; /* ioremapped device base address */
+
+ /* consistent DMA region */
+ void *driver_mem_address; /* base DMA address */
+ dma_addr_t device_host_address; /* base DMA address (bus address) */
+ dma_addr_t device_psm_buffer; /* host memory for PSM buffering (bus address) */
+
+ /* our network_device structure */
+ struct net_device *ndev;
+
+ /* device queue interface members */
+ struct isl38xx_cb *control_block; /* device control block
+ (== driver_mem_address!) */
+
+ /* Each queue has three indexes:
+ * free/index_mgmt/data_rx/tx (called index, see below),
+ * driver_curr_frag, and device_curr_frag (in the control block)
+ * All indexes are ever-increasing, but interpreted modulo the
+ * device queue size when used.
+ * index <= device_curr_frag <= driver_curr_frag at all times
+ * For rx queues, [index, device_curr_frag) contains fragments
+ * that the interrupt processing needs to handle (owned by driver).
+ * [device_curr_frag, driver_curr_frag) is the free space in the
+ * rx queue, waiting for data (owned by device). The driver
+ * increments driver_curr_frag to indicate to the device that more
+ * buffers are available.
+ * If device_curr_frag == driver_curr_frag, no more rx buffers are
+ * available, and the rx DMA engine of the device is halted.
+ * For tx queues, [index, device_curr_frag) contains fragments
+ * where tx is done; they need to be freed (owned by driver).
+ * [device_curr_frag, driver_curr_frag) contains the frames
+ * that are being transferred (owned by device). The driver
+ * increments driver_curr_frag to indicate that more tx work
+ * needs to be done.
+ */
+ u32 index_mgmt_rx; /* real index mgmt rx queue */
+ u32 index_mgmt_tx; /* read index mgmt tx queue */
+ u32 free_data_rx; /* free pointer data rx queue */
+ u32 free_data_tx; /* free pointer data tx queue */
+ u32 data_low_tx_full; /* full detected flag */
+
+ /* frame memory buffers for the device queues */
+ struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
+ struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
+ struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
+ struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
+ dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
+ dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
+
+ /* driver network interface members */
+ struct net_device_stats statistics;
+
+ /* wait for a reset interrupt */
+ wait_queue_head_t reset_done;
+
+ /* used by islpci_mgt_transaction */
+ struct semaphore mgmt_sem; /* serialize access to mailbox and wqueue */
+ struct islpci_mgmtframe *mgmt_received; /* mbox for incoming frame */
+ wait_queue_head_t mgmt_wqueue; /* waitqueue for mbox */
+
+ /* state machine */
+ islpci_state_t state;
+ int state_off; /* enumeration of off-state, if 0 then
+ * we're not in any off-state */
+
+ /* WPA stuff */
+ int wpa; /* WPA mode enabled */
+ struct list_head bss_wpa_list;
+ int num_bss_wpa;
+ struct semaphore wpa_sem;
+
+ struct work_struct reset_task;
+ int reset_task_pending;
+} islpci_private;
+
+static inline islpci_state_t
+islpci_get_state(islpci_private *priv)
+{
+ /* lock */
+ return priv->state;
+ /* unlock */
+}
+
+islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
+
+#define ISLPCI_TX_TIMEOUT (2*HZ)
+
+irqreturn_t islpci_interrupt(int, void *, struct pt_regs *);
+
+int prism54_post_setup(islpci_private *, int);
+int islpci_reset(islpci_private *, int);
+
+static inline void
+islpci_trigger(islpci_private *priv)
+{
+ isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
+ priv->device_base);
+}
+
+int islpci_free_memory(islpci_private *);
+struct net_device *islpci_setup(struct pci_dev *);
+#endif /* _ISLPCI_DEV_H */