Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
new file mode 100644
index 0000000..10a5a76
--- /dev/null
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -0,0 +1,3096 @@
+/*
+ * Compaq Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/smp_lock.h>
+#include <linux/pci.h>
+#include "cpqphp.h"
+
+static u32 configure_new_device(struct controller* ctrl, struct pci_func *func,
+ u8 behind_bridge, struct resource_lists *resources);
+static int configure_new_function(struct controller* ctrl, struct pci_func *func,
+ u8 behind_bridge, struct resource_lists *resources);
+static void interrupt_event_handler(struct controller *ctrl);
+
+static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
+static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */
+static int event_finished;
+static unsigned long pushbutton_pending; /* = 0 */
+
+/* things needed for the long_delay function */
+static struct semaphore delay_sem;
+static wait_queue_head_t delay_wait;
+
+/* delay is in jiffies to wait for */
+static void long_delay(int delay)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ /* only allow 1 customer into the delay queue at once
+ * yes this makes some people wait even longer, but who really cares?
+ * this is for _huge_ delays to make the hardware happy as the
+ * signals bounce around
+ */
+ down (&delay_sem);
+
+ init_waitqueue_head(&delay_wait);
+
+ add_wait_queue(&delay_wait, &wait);
+ msleep_interruptible(jiffies_to_msecs(delay));
+ remove_wait_queue(&delay_wait, &wait);
+
+ up(&delay_sem);
+}
+
+
+/* FIXME: The following line needs to be somewhere else... */
+#define WRONG_BUS_FREQUENCY 0x07
+static u8 handle_switch_change(u8 change, struct controller * ctrl)
+{
+ int hp_slot;
+ u8 rc = 0;
+ u16 temp_word;
+ struct pci_func *func;
+ struct event_info *taskInfo;
+
+ if (!change)
+ return 0;
+
+ /* Switch Change */
+ dbg("cpqsbd: Switch interrupt received.\n");
+
+ for (hp_slot = 0; hp_slot < 6; hp_slot++) {
+ if (change & (0x1L << hp_slot)) {
+ /**********************************
+ * this one changed.
+ **********************************/
+ func = cpqhp_slot_find(ctrl->bus,
+ (hp_slot + ctrl->slot_device_offset), 0);
+
+ /* this is the structure that tells the worker thread
+ *what to do */
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+
+ temp_word = ctrl->ctrl_int_comp >> 16;
+ func->presence_save = (temp_word >> hp_slot) & 0x01;
+ func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
+
+ if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+ /**********************************
+ * Switch opened
+ **********************************/
+
+ func->switch_save = 0;
+
+ taskInfo->event_type = INT_SWITCH_OPEN;
+ } else {
+ /**********************************
+ * Switch closed
+ **********************************/
+
+ func->switch_save = 0x10;
+
+ taskInfo->event_type = INT_SWITCH_CLOSE;
+ }
+ }
+ }
+
+ return rc;
+}
+
+/**
+ * cpqhp_find_slot: find the struct slot of given device
+ * @ctrl: scan lots of this controller
+ * @device: the device id to find
+ */
+static struct slot *cpqhp_find_slot(struct controller *ctrl, u8 device)
+{
+ struct slot *slot = ctrl->slot;
+
+ while (slot && (slot->device != device)) {
+ slot = slot->next;
+ }
+
+ return slot;
+}
+
+
+static u8 handle_presence_change(u16 change, struct controller * ctrl)
+{
+ int hp_slot;
+ u8 rc = 0;
+ u8 temp_byte;
+ u16 temp_word;
+ struct pci_func *func;
+ struct event_info *taskInfo;
+ struct slot *p_slot;
+
+ if (!change)
+ return 0;
+
+ /**********************************
+ * Presence Change
+ **********************************/
+ dbg("cpqsbd: Presence/Notify input change.\n");
+ dbg(" Changed bits are 0x%4.4x\n", change );
+
+ for (hp_slot = 0; hp_slot < 6; hp_slot++) {
+ if (change & (0x0101 << hp_slot)) {
+ /**********************************
+ * this one changed.
+ **********************************/
+ func = cpqhp_slot_find(ctrl->bus,
+ (hp_slot + ctrl->slot_device_offset), 0);
+
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+
+ p_slot = cpqhp_find_slot(ctrl, hp_slot + (readb(ctrl->hpc_reg + SLOT_MASK) >> 4));
+ if (!p_slot)
+ return 0;
+
+ /* If the switch closed, must be a button
+ * If not in button mode, nevermind */
+ if (func->switch_save && (ctrl->push_button == 1)) {
+ temp_word = ctrl->ctrl_int_comp >> 16;
+ temp_byte = (temp_word >> hp_slot) & 0x01;
+ temp_byte |= (temp_word >> (hp_slot + 7)) & 0x02;
+
+ if (temp_byte != func->presence_save) {
+ /**************************************
+ * button Pressed (doesn't do anything)
+ **************************************/
+ dbg("hp_slot %d button pressed\n", hp_slot);
+ taskInfo->event_type = INT_BUTTON_PRESS;
+ } else {
+ /**********************************
+ * button Released - TAKE ACTION!!!!
+ **********************************/
+ dbg("hp_slot %d button released\n", hp_slot);
+ taskInfo->event_type = INT_BUTTON_RELEASE;
+
+ /* Cancel if we are still blinking */
+ if ((p_slot->state == BLINKINGON_STATE)
+ || (p_slot->state == BLINKINGOFF_STATE)) {
+ taskInfo->event_type = INT_BUTTON_CANCEL;
+ dbg("hp_slot %d button cancel\n", hp_slot);
+ } else if ((p_slot->state == POWERON_STATE)
+ || (p_slot->state == POWEROFF_STATE)) {
+ /* info(msg_button_ignore, p_slot->number); */
+ taskInfo->event_type = INT_BUTTON_IGNORE;
+ dbg("hp_slot %d button ignore\n", hp_slot);
+ }
+ }
+ } else {
+ /* Switch is open, assume a presence change
+ * Save the presence state */
+ temp_word = ctrl->ctrl_int_comp >> 16;
+ func->presence_save = (temp_word >> hp_slot) & 0x01;
+ func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
+
+ if ((!(ctrl->ctrl_int_comp & (0x010000 << hp_slot))) ||
+ (!(ctrl->ctrl_int_comp & (0x01000000 << hp_slot)))) {
+ /* Present */
+ taskInfo->event_type = INT_PRESENCE_ON;
+ } else {
+ /* Not Present */
+ taskInfo->event_type = INT_PRESENCE_OFF;
+ }
+ }
+ }
+ }
+
+ return rc;
+}
+
+
+static u8 handle_power_fault(u8 change, struct controller * ctrl)
+{
+ int hp_slot;
+ u8 rc = 0;
+ struct pci_func *func;
+ struct event_info *taskInfo;
+
+ if (!change)
+ return 0;
+
+ /**********************************
+ * power fault
+ **********************************/
+
+ info("power fault interrupt\n");
+
+ for (hp_slot = 0; hp_slot < 6; hp_slot++) {
+ if (change & (0x01 << hp_slot)) {
+ /**********************************
+ * this one changed.
+ **********************************/
+ func = cpqhp_slot_find(ctrl->bus,
+ (hp_slot + ctrl->slot_device_offset), 0);
+
+ taskInfo = &(ctrl->event_queue[ctrl->next_event]);
+ ctrl->next_event = (ctrl->next_event + 1) % 10;
+ taskInfo->hp_slot = hp_slot;
+
+ rc++;
+
+ if (ctrl->ctrl_int_comp & (0x00000100 << hp_slot)) {
+ /**********************************
+ * power fault Cleared
+ **********************************/
+ func->status = 0x00;
+
+ taskInfo->event_type = INT_POWER_FAULT_CLEAR;
+ } else {
+ /**********************************
+ * power fault
+ **********************************/
+ taskInfo->event_type = INT_POWER_FAULT;
+
+ if (ctrl->rev < 4) {
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_off (ctrl, hp_slot);
+ set_SOGO (ctrl);
+
+ /* this is a fatal condition, we want
+ * to crash the machine to protect from
+ * data corruption. simulated_NMI
+ * shouldn't ever return */
+ /* FIXME
+ simulated_NMI(hp_slot, ctrl); */
+
+ /* The following code causes a software
+ * crash just in case simulated_NMI did
+ * return */
+ /*FIXME
+ panic(msg_power_fault); */
+ } else {
+ /* set power fault status for this board */
+ func->status = 0xFF;
+ info("power fault bit %x set\n", hp_slot);
+ }
+ }
+ }
+ }
+
+ return rc;
+}
+
+
+/**
+ * sort_by_size: sort nodes on the list by their length, smallest first.
+ * @head: list to sort
+ *
+ */
+static int sort_by_size(struct pci_resource **head)
+{
+ struct pci_resource *current_res;
+ struct pci_resource *next_res;
+ int out_of_order = 1;
+
+ if (!(*head))
+ return 1;
+
+ if (!((*head)->next))
+ return 0;
+
+ while (out_of_order) {
+ out_of_order = 0;
+
+ /* Special case for swapping list head */
+ if (((*head)->next) &&
+ ((*head)->length > (*head)->next->length)) {
+ out_of_order++;
+ current_res = *head;
+ *head = (*head)->next;
+ current_res->next = (*head)->next;
+ (*head)->next = current_res;
+ }
+
+ current_res = *head;
+
+ while (current_res->next && current_res->next->next) {
+ if (current_res->next->length > current_res->next->next->length) {
+ out_of_order++;
+ next_res = current_res->next;
+ current_res->next = current_res->next->next;
+ current_res = current_res->next;
+ next_res->next = current_res->next;
+ current_res->next = next_res;
+ } else
+ current_res = current_res->next;
+ }
+ } /* End of out_of_order loop */
+
+ return 0;
+}
+
+
+/**
+ * sort_by_max_size: sort nodes on the list by their length, largest first.
+ * @head: list to sort
+ *
+ */
+static int sort_by_max_size(struct pci_resource **head)
+{
+ struct pci_resource *current_res;
+ struct pci_resource *next_res;
+ int out_of_order = 1;
+
+ if (!(*head))
+ return 1;
+
+ if (!((*head)->next))
+ return 0;
+
+ while (out_of_order) {
+ out_of_order = 0;
+
+ /* Special case for swapping list head */
+ if (((*head)->next) &&
+ ((*head)->length < (*head)->next->length)) {
+ out_of_order++;
+ current_res = *head;
+ *head = (*head)->next;
+ current_res->next = (*head)->next;
+ (*head)->next = current_res;
+ }
+
+ current_res = *head;
+
+ while (current_res->next && current_res->next->next) {
+ if (current_res->next->length < current_res->next->next->length) {
+ out_of_order++;
+ next_res = current_res->next;
+ current_res->next = current_res->next->next;
+ current_res = current_res->next;
+ next_res->next = current_res->next;
+ current_res->next = next_res;
+ } else
+ current_res = current_res->next;
+ }
+ } /* End of out_of_order loop */
+
+ return 0;
+}
+
+
+/**
+ * do_pre_bridge_resource_split: find node of resources that are unused
+ *
+ */
+static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head,
+ struct pci_resource **orig_head, u32 alignment)
+{
+ struct pci_resource *prevnode = NULL;
+ struct pci_resource *node;
+ struct pci_resource *split_node;
+ u32 rc;
+ u32 temp_dword;
+ dbg("do_pre_bridge_resource_split\n");
+
+ if (!(*head) || !(*orig_head))
+ return NULL;
+
+ rc = cpqhp_resource_sort_and_combine(head);
+
+ if (rc)
+ return NULL;
+
+ if ((*head)->base != (*orig_head)->base)
+ return NULL;
+
+ if ((*head)->length == (*orig_head)->length)
+ return NULL;
+
+
+ /* If we got here, there the bridge requires some of the resource, but
+ * we may be able to split some off of the front */
+
+ node = *head;
+
+ if (node->length & (alignment -1)) {
+ /* this one isn't an aligned length, so we'll make a new entry
+ * and split it up. */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+
+ temp_dword = (node->length | (alignment-1)) + 1 - alignment;
+
+ split_node->base = node->base;
+ split_node->length = temp_dword;
+
+ node->length -= temp_dword;
+ node->base += split_node->length;
+
+ /* Put it in the list */
+ *head = split_node;
+ split_node->next = node;
+ }
+
+ if (node->length < alignment)
+ return NULL;
+
+ /* Now unlink it */
+ if (*head == node) {
+ *head = node->next;
+ } else {
+ prevnode = *head;
+ while (prevnode->next != node)
+ prevnode = prevnode->next;
+
+ prevnode->next = node->next;
+ }
+ node->next = NULL;
+
+ return node;
+}
+
+
+/**
+ * do_bridge_resource_split: find one node of resources that aren't in use
+ *
+ */
+static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment)
+{
+ struct pci_resource *prevnode = NULL;
+ struct pci_resource *node;
+ u32 rc;
+ u32 temp_dword;
+
+ rc = cpqhp_resource_sort_and_combine(head);
+
+ if (rc)
+ return NULL;
+
+ node = *head;
+
+ while (node->next) {
+ prevnode = node;
+ node = node->next;
+ kfree(prevnode);
+ }
+
+ if (node->length < alignment)
+ goto error;
+
+ if (node->base & (alignment - 1)) {
+ /* Short circuit if adjusted size is too small */
+ temp_dword = (node->base | (alignment-1)) + 1;
+ if ((node->length - (temp_dword - node->base)) < alignment)
+ goto error;
+
+ node->length -= (temp_dword - node->base);
+ node->base = temp_dword;
+ }
+
+ if (node->length & (alignment - 1))
+ /* There's stuff in use after this node */
+ goto error;
+
+ return node;
+error:
+ kfree(node);
+ return NULL;
+}
+
+
+/**
+ * get_io_resource: find first node of given size not in ISA aliasing window.
+ * @head: list to search
+ * @size: size of node to find, must be a power of two.
+ *
+ * Description: this function sorts the resource list by size and then returns
+ * returns the first node of "size" length that is not in the ISA aliasing
+ * window. If it finds a node larger than "size" it will split it up.
+ *
+ */
+static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size)
+{
+ struct pci_resource *prevnode;
+ struct pci_resource *node;
+ struct pci_resource *split_node;
+ u32 temp_dword;
+
+ if (!(*head))
+ return NULL;
+
+ if ( cpqhp_resource_sort_and_combine(head) )
+ return NULL;
+
+ if ( sort_by_size(head) )
+ return NULL;
+
+ for (node = *head; node; node = node->next) {
+ if (node->length < size)
+ continue;
+
+ if (node->base & (size - 1)) {
+ /* this one isn't base aligned properly
+ * so we'll make a new entry and split it up */
+ temp_dword = (node->base | (size-1)) + 1;
+
+ /* Short circuit if adjusted size is too small */
+ if ((node->length - (temp_dword - node->base)) < size)
+ continue;
+
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+
+ split_node->base = node->base;
+ split_node->length = temp_dword - node->base;
+ node->base = temp_dword;
+ node->length -= split_node->length;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of non-aligned base */
+
+ /* Don't need to check if too small since we already did */
+ if (node->length > size) {
+ /* this one is longer than we need
+ * so we'll make a new entry and split it up */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+
+ split_node->base = node->base + size;
+ split_node->length = node->length - size;
+ node->length = size;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of too big on top end */
+
+ /* For IO make sure it's not in the ISA aliasing space */
+ if (node->base & 0x300L)
+ continue;
+
+ /* If we got here, then it is the right size
+ * Now take it out of the list and break */
+ if (*head == node) {
+ *head = node->next;
+ } else {
+ prevnode = *head;
+ while (prevnode->next != node)
+ prevnode = prevnode->next;
+
+ prevnode->next = node->next;
+ }
+ node->next = NULL;
+ break;
+ }
+
+ return node;
+}
+
+
+/**
+ * get_max_resource: get largest node which has at least the given size.
+ * @head: the list to search the node in
+ * @size: the minimum size of the node to find
+ *
+ * Description: Gets the largest node that is at least "size" big from the
+ * list pointed to by head. It aligns the node on top and bottom
+ * to "size" alignment before returning it.
+ */
+static struct pci_resource *get_max_resource(struct pci_resource **head, u32 size)
+{
+ struct pci_resource *max;
+ struct pci_resource *temp;
+ struct pci_resource *split_node;
+ u32 temp_dword;
+
+ if (cpqhp_resource_sort_and_combine(head))
+ return NULL;
+
+ if (sort_by_max_size(head))
+ return NULL;
+
+ for (max = *head; max; max = max->next) {
+ /* If not big enough we could probably just bail,
+ * instead we'll continue to the next. */
+ if (max->length < size)
+ continue;
+
+ if (max->base & (size - 1)) {
+ /* this one isn't base aligned properly
+ * so we'll make a new entry and split it up */
+ temp_dword = (max->base | (size-1)) + 1;
+
+ /* Short circuit if adjusted size is too small */
+ if ((max->length - (temp_dword - max->base)) < size)
+ continue;
+
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+
+ split_node->base = max->base;
+ split_node->length = temp_dword - max->base;
+ max->base = temp_dword;
+ max->length -= split_node->length;
+
+ split_node->next = max->next;
+ max->next = split_node;
+ }
+
+ if ((max->base + max->length) & (size - 1)) {
+ /* this one isn't end aligned properly at the top
+ * so we'll make a new entry and split it up */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+ temp_dword = ((max->base + max->length) & ~(size - 1));
+ split_node->base = temp_dword;
+ split_node->length = max->length + max->base
+ - split_node->base;
+ max->length -= split_node->length;
+
+ split_node->next = max->next;
+ max->next = split_node;
+ }
+
+ /* Make sure it didn't shrink too much when we aligned it */
+ if (max->length < size)
+ continue;
+
+ /* Now take it out of the list */
+ temp = *head;
+ if (temp == max) {
+ *head = max->next;
+ } else {
+ while (temp && temp->next != max) {
+ temp = temp->next;
+ }
+
+ temp->next = max->next;
+ }
+
+ max->next = NULL;
+ break;
+ }
+
+ return max;
+}
+
+
+/**
+ * get_resource: find resource of given size and split up larger ones.
+ * @head: the list to search for resources
+ * @size: the size limit to use
+ *
+ * Description: This function sorts the resource list by size and then
+ * returns the first node of "size" length. If it finds a node
+ * larger than "size" it will split it up.
+ *
+ * size must be a power of two.
+ */
+static struct pci_resource *get_resource(struct pci_resource **head, u32 size)
+{
+ struct pci_resource *prevnode;
+ struct pci_resource *node;
+ struct pci_resource *split_node;
+ u32 temp_dword;
+
+ if (cpqhp_resource_sort_and_combine(head))
+ return NULL;
+
+ if (sort_by_size(head))
+ return NULL;
+
+ for (node = *head; node; node = node->next) {
+ dbg("%s: req_size =%x node=%p, base=%x, length=%x\n",
+ __FUNCTION__, size, node, node->base, node->length);
+ if (node->length < size)
+ continue;
+
+ if (node->base & (size - 1)) {
+ dbg("%s: not aligned\n", __FUNCTION__);
+ /* this one isn't base aligned properly
+ * so we'll make a new entry and split it up */
+ temp_dword = (node->base | (size-1)) + 1;
+
+ /* Short circuit if adjusted size is too small */
+ if ((node->length - (temp_dword - node->base)) < size)
+ continue;
+
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+
+ split_node->base = node->base;
+ split_node->length = temp_dword - node->base;
+ node->base = temp_dword;
+ node->length -= split_node->length;
+
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of non-aligned base */
+
+ /* Don't need to check if too small since we already did */
+ if (node->length > size) {
+ dbg("%s: too big\n", __FUNCTION__);
+ /* this one is longer than we need
+ * so we'll make a new entry and split it up */
+ split_node = kmalloc(sizeof(*split_node), GFP_KERNEL);
+
+ if (!split_node)
+ return NULL;
+
+ split_node->base = node->base + size;
+ split_node->length = node->length - size;
+ node->length = size;
+
+ /* Put it in the list */
+ split_node->next = node->next;
+ node->next = split_node;
+ } /* End of too big on top end */
+
+ dbg("%s: got one!!!\n", __FUNCTION__);
+ /* If we got here, then it is the right size
+ * Now take it out of the list */
+ if (*head == node) {
+ *head = node->next;
+ } else {
+ prevnode = *head;
+ while (prevnode->next != node)
+ prevnode = prevnode->next;
+
+ prevnode->next = node->next;
+ }
+ node->next = NULL;
+ break;
+ }
+ return node;
+}
+
+
+/**
+ * cpqhp_resource_sort_and_combine: sort nodes by base addresses and clean up.
+ * @head: the list to sort and clean up
+ *
+ * Description: Sorts all of the nodes in the list in ascending order by
+ * their base addresses. Also does garbage collection by
+ * combining adjacent nodes.
+ *
+ * returns 0 if success
+ */
+int cpqhp_resource_sort_and_combine(struct pci_resource **head)
+{
+ struct pci_resource *node1;
+ struct pci_resource *node2;
+ int out_of_order = 1;
+
+ dbg("%s: head = %p, *head = %p\n", __FUNCTION__, head, *head);
+
+ if (!(*head))
+ return 1;
+
+ dbg("*head->next = %p\n",(*head)->next);
+
+ if (!(*head)->next)
+ return 0; /* only one item on the list, already sorted! */
+
+ dbg("*head->base = 0x%x\n",(*head)->base);
+ dbg("*head->next->base = 0x%x\n",(*head)->next->base);
+ while (out_of_order) {
+ out_of_order = 0;
+
+ /* Special case for swapping list head */
+ if (((*head)->next) &&
+ ((*head)->base > (*head)->next->base)) {
+ node1 = *head;
+ (*head) = (*head)->next;
+ node1->next = (*head)->next;
+ (*head)->next = node1;
+ out_of_order++;
+ }
+
+ node1 = (*head);
+
+ while (node1->next && node1->next->next) {
+ if (node1->next->base > node1->next->next->base) {
+ out_of_order++;
+ node2 = node1->next;
+ node1->next = node1->next->next;
+ node1 = node1->next;
+ node2->next = node1->next;
+ node1->next = node2;
+ } else
+ node1 = node1->next;
+ }
+ } /* End of out_of_order loop */
+
+ node1 = *head;
+
+ while (node1 && node1->next) {
+ if ((node1->base + node1->length) == node1->next->base) {
+ /* Combine */
+ dbg("8..\n");
+ node1->length += node1->next->length;
+ node2 = node1->next;
+ node1->next = node1->next->next;
+ kfree(node2);
+ } else
+ node1 = node1->next;
+ }
+
+ return 0;
+}
+
+
+irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data, struct pt_regs *regs)
+{
+ struct controller *ctrl = data;
+ u8 schedule_flag = 0;
+ u8 reset;
+ u16 misc;
+ u32 Diff;
+ u32 temp_dword;
+
+
+ misc = readw(ctrl->hpc_reg + MISC);
+ /***************************************
+ * Check to see if it was our interrupt
+ ***************************************/
+ if (!(misc & 0x000C)) {
+ return IRQ_NONE;
+ }
+
+ if (misc & 0x0004) {
+ /**********************************
+ * Serial Output interrupt Pending
+ **********************************/
+
+ /* Clear the interrupt */
+ misc |= 0x0004;
+ writew(misc, ctrl->hpc_reg + MISC);
+
+ /* Read to clear posted writes */
+ misc = readw(ctrl->hpc_reg + MISC);
+
+ dbg ("%s - waking up\n", __FUNCTION__);
+ wake_up_interruptible(&ctrl->queue);
+ }
+
+ if (misc & 0x0008) {
+ /* General-interrupt-input interrupt Pending */
+ Diff = readl(ctrl->hpc_reg + INT_INPUT_CLEAR) ^ ctrl->ctrl_int_comp;
+
+ ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ /* Clear the interrupt */
+ writel(Diff, ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ /* Read it back to clear any posted writes */
+ temp_dword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ if (!Diff)
+ /* Clear all interrupts */
+ writel(0xFFFFFFFF, ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ schedule_flag += handle_switch_change((u8)(Diff & 0xFFL), ctrl);
+ schedule_flag += handle_presence_change((u16)((Diff & 0xFFFF0000L) >> 16), ctrl);
+ schedule_flag += handle_power_fault((u8)((Diff & 0xFF00L) >> 8), ctrl);
+ }
+
+ reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE);
+ if (reset & 0x40) {
+ /* Bus reset has completed */
+ reset &= 0xCF;
+ writeb(reset, ctrl->hpc_reg + RESET_FREQ_MODE);
+ reset = readb(ctrl->hpc_reg + RESET_FREQ_MODE);
+ wake_up_interruptible(&ctrl->queue);
+ }
+
+ if (schedule_flag) {
+ up(&event_semaphore);
+ dbg("Signal event_semaphore\n");
+ }
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * cpqhp_slot_create - Creates a node and adds it to the proper bus.
+ * @busnumber - bus where new node is to be located
+ *
+ * Returns pointer to the new node or NULL if unsuccessful
+ */
+struct pci_func *cpqhp_slot_create(u8 busnumber)
+{
+ struct pci_func *new_slot;
+ struct pci_func *next;
+
+ new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
+
+ if (new_slot == NULL) {
+ /* I'm not dead yet!
+ * You will be. */
+ return new_slot;
+ }
+
+ memset(new_slot, 0, sizeof(struct pci_func));
+
+ new_slot->next = NULL;
+ new_slot->configured = 1;
+
+ if (cpqhp_slot_list[busnumber] == NULL) {
+ cpqhp_slot_list[busnumber] = new_slot;
+ } else {
+ next = cpqhp_slot_list[busnumber];
+ while (next->next != NULL)
+ next = next->next;
+ next->next = new_slot;
+ }
+ return new_slot;
+}
+
+
+/**
+ * slot_remove - Removes a node from the linked list of slots.
+ * @old_slot: slot to remove
+ *
+ * Returns 0 if successful, !0 otherwise.
+ */
+static int slot_remove(struct pci_func * old_slot)
+{
+ struct pci_func *next;
+
+ if (old_slot == NULL)
+ return 1;
+
+ next = cpqhp_slot_list[old_slot->bus];
+
+ if (next == NULL) {
+ return 1;
+ }
+
+ if (next == old_slot) {
+ cpqhp_slot_list[old_slot->bus] = old_slot->next;
+ cpqhp_destroy_board_resources(old_slot);
+ kfree(old_slot);
+ return 0;
+ }
+
+ while ((next->next != old_slot) && (next->next != NULL)) {
+ next = next->next;
+ }
+
+ if (next->next == old_slot) {
+ next->next = old_slot->next;
+ cpqhp_destroy_board_resources(old_slot);
+ kfree(old_slot);
+ return 0;
+ } else
+ return 2;
+}
+
+
+/**
+ * bridge_slot_remove - Removes a node from the linked list of slots.
+ * @bridge: bridge to remove
+ *
+ * Returns 0 if successful, !0 otherwise.
+ */
+static int bridge_slot_remove(struct pci_func *bridge)
+{
+ u8 subordinateBus, secondaryBus;
+ u8 tempBus;
+ struct pci_func *next;
+
+ secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF;
+ subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF;
+
+ for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) {
+ next = cpqhp_slot_list[tempBus];
+
+ while (!slot_remove(next)) {
+ next = cpqhp_slot_list[tempBus];
+ }
+ }
+
+ next = cpqhp_slot_list[bridge->bus];
+
+ if (next == NULL)
+ return 1;
+
+ if (next == bridge) {
+ cpqhp_slot_list[bridge->bus] = bridge->next;
+ goto out;
+ }
+
+ while ((next->next != bridge) && (next->next != NULL))
+ next = next->next;
+
+ if (next->next != bridge)
+ return 2;
+ next->next = bridge->next;
+out:
+ kfree(bridge);
+ return 0;
+}
+
+
+/**
+ * cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed
+ * @bus: bus to find
+ * @device: device to find
+ * @index: is 0 for first function found, 1 for the second...
+ *
+ * Returns pointer to the node if successful, %NULL otherwise.
+ */
+struct pci_func *cpqhp_slot_find(u8 bus, u8 device, u8 index)
+{
+ int found = -1;
+ struct pci_func *func;
+
+ func = cpqhp_slot_list[bus];
+
+ if ((func == NULL) || ((func->device == device) && (index == 0)))
+ return func;
+
+ if (func->device == device)
+ found++;
+
+ while (func->next != NULL) {
+ func = func->next;
+
+ if (func->device == device)
+ found++;
+
+ if (found == index)
+ return func;
+ }
+
+ return NULL;
+}
+
+
+/* DJZ: I don't think is_bridge will work as is.
+ * FIXME */
+static int is_bridge(struct pci_func * func)
+{
+ /* Check the header type */
+ if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01)
+ return 1;
+ else
+ return 0;
+}
+
+
+/**
+ * set_controller_speed - set the frequency and/or mode of a specific
+ * controller segment.
+ *
+ * @ctrl: controller to change frequency/mode for.
+ * @adapter_speed: the speed of the adapter we want to match.
+ * @hp_slot: the slot number where the adapter is installed.
+ *
+ * Returns 0 if we successfully change frequency and/or mode to match the
+ * adapter speed.
+ *
+ */
+static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
+{
+ struct slot *slot;
+ u8 reg;
+ u8 slot_power = readb(ctrl->hpc_reg + SLOT_POWER);
+ u16 reg16;
+ u32 leds = readl(ctrl->hpc_reg + LED_CONTROL);
+
+ if (ctrl->speed == adapter_speed)
+ return 0;
+
+ /* We don't allow freq/mode changes if we find another adapter running
+ * in another slot on this controller */
+ for(slot = ctrl->slot; slot; slot = slot->next) {
+ if (slot->device == (hp_slot + ctrl->slot_device_offset))
+ continue;
+ if (!slot->hotplug_slot && !slot->hotplug_slot->info)
+ continue;
+ if (slot->hotplug_slot->info->adapter_status == 0)
+ continue;
+ /* If another adapter is running on the same segment but at a
+ * lower speed/mode, we allow the new adapter to function at
+ * this rate if supported */
+ if (ctrl->speed < adapter_speed)
+ return 0;
+
+ return 1;
+ }
+
+ /* If the controller doesn't support freq/mode changes and the
+ * controller is running at a higher mode, we bail */
+ if ((ctrl->speed > adapter_speed) && (!ctrl->pcix_speed_capability))
+ return 1;
+
+ /* But we allow the adapter to run at a lower rate if possible */
+ if ((ctrl->speed < adapter_speed) && (!ctrl->pcix_speed_capability))
+ return 0;
+
+ /* We try to set the max speed supported by both the adapter and
+ * controller */
+ if (ctrl->speed_capability < adapter_speed) {
+ if (ctrl->speed == ctrl->speed_capability)
+ return 0;
+ adapter_speed = ctrl->speed_capability;
+ }
+
+ writel(0x0L, ctrl->hpc_reg + LED_CONTROL);
+ writeb(0x00, ctrl->hpc_reg + SLOT_ENABLE);
+
+ set_SOGO(ctrl);
+ wait_for_ctrl_irq(ctrl);
+
+ if (adapter_speed != PCI_SPEED_133MHz_PCIX)
+ reg = 0xF5;
+ else
+ reg = 0xF4;
+ pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
+
+ reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
+ reg16 &= ~0x000F;
+ switch(adapter_speed) {
+ case(PCI_SPEED_133MHz_PCIX):
+ reg = 0x75;
+ reg16 |= 0xB;
+ break;
+ case(PCI_SPEED_100MHz_PCIX):
+ reg = 0x74;
+ reg16 |= 0xA;
+ break;
+ case(PCI_SPEED_66MHz_PCIX):
+ reg = 0x73;
+ reg16 |= 0x9;
+ break;
+ case(PCI_SPEED_66MHz):
+ reg = 0x73;
+ reg16 |= 0x1;
+ break;
+ default: /* 33MHz PCI 2.2 */
+ reg = 0x71;
+ break;
+
+ }
+ reg16 |= 0xB << 12;
+ writew(reg16, ctrl->hpc_reg + NEXT_CURR_FREQ);
+
+ mdelay(5);
+
+ /* Reenable interrupts */
+ writel(0, ctrl->hpc_reg + INT_MASK);
+
+ pci_write_config_byte(ctrl->pci_dev, 0x41, reg);
+
+ /* Restart state machine */
+ reg = ~0xF;
+ pci_read_config_byte(ctrl->pci_dev, 0x43, ®);
+ pci_write_config_byte(ctrl->pci_dev, 0x43, reg);
+
+ /* Only if mode change...*/
+ if (((ctrl->speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
+ ((ctrl->speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
+ set_SOGO(ctrl);
+
+ wait_for_ctrl_irq(ctrl);
+ mdelay(1100);
+
+ /* Restore LED/Slot state */
+ writel(leds, ctrl->hpc_reg + LED_CONTROL);
+ writeb(slot_power, ctrl->hpc_reg + SLOT_ENABLE);
+
+ set_SOGO(ctrl);
+ wait_for_ctrl_irq(ctrl);
+
+ ctrl->speed = adapter_speed;
+ slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ info("Successfully changed frequency/mode for adapter in slot %d\n",
+ slot->number);
+ return 0;
+}
+
+/* the following routines constitute the bulk of the
+ hotplug controller logic
+ */
+
+
+/**
+ * board_replaced - Called after a board has been replaced in the system.
+ *
+ * This is only used if we don't have resources for hot add
+ * Turns power on for the board
+ * Checks to see if board is the same
+ * If board is same, reconfigures it
+ * If board isn't same, turns it back off.
+ *
+ */
+static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
+{
+ u8 hp_slot;
+ u8 temp_byte;
+ u8 adapter_speed;
+ u32 index;
+ u32 rc = 0;
+ u32 src = 8;
+
+ hp_slot = func->device - ctrl->slot_device_offset;
+
+ if (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot)) {
+ /**********************************
+ * The switch is open.
+ **********************************/
+ rc = INTERLOCK_OPEN;
+ } else if (is_slot_enabled (ctrl, hp_slot)) {
+ /**********************************
+ * The board is already on
+ **********************************/
+ rc = CARD_FUNCTIONING;
+ } else {
+ down(&ctrl->crit_sect);
+
+ /* turn on board without attaching to the bus */
+ enable_slot_power (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Change bits in slot power register to force another shift out
+ * NOTE: this is to work around the timer bug */
+ temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
+ writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
+ writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ adapter_speed = get_adapter_speed(ctrl, hp_slot);
+ if (ctrl->speed != adapter_speed)
+ if (set_controller_speed(ctrl, adapter_speed, hp_slot))
+ rc = WRONG_BUS_FREQUENCY;
+
+ /* turn off board without attaching to the bus */
+ disable_slot_power (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+
+ if (rc)
+ return rc;
+
+ down(&ctrl->crit_sect);
+
+ slot_enable (ctrl, hp_slot);
+ green_LED_blink (ctrl, hp_slot);
+
+ amber_LED_off (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+
+ /* Wait for ~1 second because of hot plug spec */
+ long_delay(1*HZ);
+
+ /* Check for a power fault */
+ if (func->status == 0xFF) {
+ /* power fault occurred, but it was benign */
+ rc = POWER_FAILURE;
+ func->status = 0;
+ } else
+ rc = cpqhp_valid_replace(ctrl, func);
+
+ if (!rc) {
+ /* It must be the same board */
+
+ rc = cpqhp_configure_board(ctrl, func);
+
+ if (rc || src) {
+ /* If configuration fails, turn it off
+ * Get slot won't work for devices behind
+ * bridges, but in this case it will always be
+ * called for the "base" bus/dev/func of an
+ * adapter. */
+
+ down(&ctrl->crit_sect);
+
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_off (ctrl, hp_slot);
+ slot_disable (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+
+ if (rc)
+ return rc;
+ else
+ return 1;
+ }
+
+ func->status = 0;
+ func->switch_save = 0x10;
+
+ index = 1;
+ while (((func = cpqhp_slot_find(func->bus, func->device, index)) != NULL) && !rc) {
+ rc |= cpqhp_configure_board(ctrl, func);
+ index++;
+ }
+
+ if (rc) {
+ /* If configuration fails, turn it off
+ * Get slot won't work for devices behind
+ * bridges, but in this case it will always be
+ * called for the "base" bus/dev/func of an
+ * adapter. */
+
+ down(&ctrl->crit_sect);
+
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_off (ctrl, hp_slot);
+ slot_disable (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+
+ return rc;
+ }
+ /* Done configuring so turn LED on full time */
+
+ down(&ctrl->crit_sect);
+
+ green_LED_on (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+ rc = 0;
+ } else {
+ /* Something is wrong
+
+ * Get slot won't work for devices behind bridges, but
+ * in this case it will always be called for the "base"
+ * bus/dev/func of an adapter. */
+
+ down(&ctrl->crit_sect);
+
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_off (ctrl, hp_slot);
+ slot_disable (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+ }
+
+ }
+ return rc;
+
+}
+
+
+/**
+ * board_added - Called after a board has been added to the system.
+ *
+ * Turns power on for the board
+ * Configures board
+ *
+ */
+static u32 board_added(struct pci_func *func, struct controller *ctrl)
+{
+ u8 hp_slot;
+ u8 temp_byte;
+ u8 adapter_speed;
+ int index;
+ u32 temp_register = 0xFFFFFFFF;
+ u32 rc = 0;
+ struct pci_func *new_slot = NULL;
+ struct slot *p_slot;
+ struct resource_lists res_lists;
+
+ hp_slot = func->device - ctrl->slot_device_offset;
+ dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n",
+ __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot);
+
+ down(&ctrl->crit_sect);
+
+ /* turn on board without attaching to the bus */
+ enable_slot_power(ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Change bits in slot power register to force another shift out
+ * NOTE: this is to work around the timer bug */
+ temp_byte = readb(ctrl->hpc_reg + SLOT_POWER);
+ writeb(0x00, ctrl->hpc_reg + SLOT_POWER);
+ writeb(temp_byte, ctrl->hpc_reg + SLOT_POWER);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ adapter_speed = get_adapter_speed(ctrl, hp_slot);
+ if (ctrl->speed != adapter_speed)
+ if (set_controller_speed(ctrl, adapter_speed, hp_slot))
+ rc = WRONG_BUS_FREQUENCY;
+
+ /* turn off board without attaching to the bus */
+ disable_slot_power (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq(ctrl);
+
+ up(&ctrl->crit_sect);
+
+ if (rc)
+ return rc;
+
+ p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+ /* turn on board and blink green LED */
+
+ dbg("%s: before down\n", __FUNCTION__);
+ down(&ctrl->crit_sect);
+ dbg("%s: after down\n", __FUNCTION__);
+
+ dbg("%s: before slot_enable\n", __FUNCTION__);
+ slot_enable (ctrl, hp_slot);
+
+ dbg("%s: before green_LED_blink\n", __FUNCTION__);
+ green_LED_blink (ctrl, hp_slot);
+
+ dbg("%s: before amber_LED_blink\n", __FUNCTION__);
+ amber_LED_off (ctrl, hp_slot);
+
+ dbg("%s: before set_SOGO\n", __FUNCTION__);
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ dbg("%s: before wait_for_ctrl_irq\n", __FUNCTION__);
+ wait_for_ctrl_irq (ctrl);
+ dbg("%s: after wait_for_ctrl_irq\n", __FUNCTION__);
+
+ dbg("%s: before up\n", __FUNCTION__);
+ up(&ctrl->crit_sect);
+ dbg("%s: after up\n", __FUNCTION__);
+
+ /* Wait for ~1 second because of hot plug spec */
+ dbg("%s: before long_delay\n", __FUNCTION__);
+ long_delay(1*HZ);
+ dbg("%s: after long_delay\n", __FUNCTION__);
+
+ dbg("%s: func status = %x\n", __FUNCTION__, func->status);
+ /* Check for a power fault */
+ if (func->status == 0xFF) {
+ /* power fault occurred, but it was benign */
+ temp_register = 0xFFFFFFFF;
+ dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register);
+ rc = POWER_FAILURE;
+ func->status = 0;
+ } else {
+ /* Get vendor/device ID u32 */
+ ctrl->pci_bus->number = func->bus;
+ rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), PCI_VENDOR_ID, &temp_register);
+ dbg("%s: pci_read_config_dword returns %d\n", __FUNCTION__, rc);
+ dbg("%s: temp_register is %x\n", __FUNCTION__, temp_register);
+
+ if (rc != 0) {
+ /* Something's wrong here */
+ temp_register = 0xFFFFFFFF;
+ dbg("%s: temp register set to %x by error\n", __FUNCTION__, temp_register);
+ }
+ /* Preset return code. It will be changed later if things go okay. */
+ rc = NO_ADAPTER_PRESENT;
+ }
+
+ /* All F's is an empty slot or an invalid board */
+ if (temp_register != 0xFFFFFFFF) { /* Check for a board in the slot */
+ res_lists.io_head = ctrl->io_head;
+ res_lists.mem_head = ctrl->mem_head;
+ res_lists.p_mem_head = ctrl->p_mem_head;
+ res_lists.bus_head = ctrl->bus_head;
+ res_lists.irqs = NULL;
+
+ rc = configure_new_device(ctrl, func, 0, &res_lists);
+
+ dbg("%s: back from configure_new_device\n", __FUNCTION__);
+ ctrl->io_head = res_lists.io_head;
+ ctrl->mem_head = res_lists.mem_head;
+ ctrl->p_mem_head = res_lists.p_mem_head;
+ ctrl->bus_head = res_lists.bus_head;
+
+ cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
+ cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
+ cpqhp_resource_sort_and_combine(&(ctrl->io_head));
+ cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
+
+ if (rc) {
+ down(&ctrl->crit_sect);
+
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_off (ctrl, hp_slot);
+ slot_disable (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+ return rc;
+ } else {
+ cpqhp_save_slot_config(ctrl, func);
+ }
+
+
+ func->status = 0;
+ func->switch_save = 0x10;
+ func->is_a_board = 0x01;
+
+ /* next, we will instantiate the linux pci_dev structures (with
+ * appropriate driver notification, if already present) */
+ dbg("%s: configure linux pci_dev structure\n", __FUNCTION__);
+ index = 0;
+ do {
+ new_slot = cpqhp_slot_find(ctrl->bus, func->device, index++);
+ if (new_slot && !new_slot->pci_dev) {
+ cpqhp_configure_device(ctrl, new_slot);
+ }
+ } while (new_slot);
+
+ down(&ctrl->crit_sect);
+
+ green_LED_on (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+ } else {
+ down(&ctrl->crit_sect);
+
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_off (ctrl, hp_slot);
+ slot_disable (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+
+ return rc;
+ }
+ return 0;
+}
+
+
+/**
+ * remove_board - Turns off slot and LED's
+ *
+ */
+static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl)
+{
+ int index;
+ u8 skip = 0;
+ u8 device;
+ u8 hp_slot;
+ u8 temp_byte;
+ u32 rc;
+ struct resource_lists res_lists;
+ struct pci_func *temp_func;
+
+ if (cpqhp_unconfigure_device(func))
+ return 1;
+
+ device = func->device;
+
+ hp_slot = func->device - ctrl->slot_device_offset;
+ dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
+
+ /* When we get here, it is safe to change base address registers.
+ * We will attempt to save the base address register lengths */
+ if (replace_flag || !ctrl->add_support)
+ rc = cpqhp_save_base_addr_length(ctrl, func);
+ else if (!func->bus_head && !func->mem_head &&
+ !func->p_mem_head && !func->io_head) {
+ /* Here we check to see if we've saved any of the board's
+ * resources already. If so, we'll skip the attempt to
+ * determine what's being used. */
+ index = 0;
+ temp_func = cpqhp_slot_find(func->bus, func->device, index++);
+ while (temp_func) {
+ if (temp_func->bus_head || temp_func->mem_head
+ || temp_func->p_mem_head || temp_func->io_head) {
+ skip = 1;
+ break;
+ }
+ temp_func = cpqhp_slot_find(temp_func->bus, temp_func->device, index++);
+ }
+
+ if (!skip)
+ rc = cpqhp_save_used_resources(ctrl, func);
+ }
+ /* Change status to shutdown */
+ if (func->is_a_board)
+ func->status = 0x01;
+ func->configured = 0;
+
+ down(&ctrl->crit_sect);
+
+ green_LED_off (ctrl, hp_slot);
+ slot_disable (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* turn off SERR for slot */
+ temp_byte = readb(ctrl->hpc_reg + SLOT_SERR);
+ temp_byte &= ~(0x01 << hp_slot);
+ writeb(temp_byte, ctrl->hpc_reg + SLOT_SERR);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+
+ if (!replace_flag && ctrl->add_support) {
+ while (func) {
+ res_lists.io_head = ctrl->io_head;
+ res_lists.mem_head = ctrl->mem_head;
+ res_lists.p_mem_head = ctrl->p_mem_head;
+ res_lists.bus_head = ctrl->bus_head;
+
+ cpqhp_return_board_resources(func, &res_lists);
+
+ ctrl->io_head = res_lists.io_head;
+ ctrl->mem_head = res_lists.mem_head;
+ ctrl->p_mem_head = res_lists.p_mem_head;
+ ctrl->bus_head = res_lists.bus_head;
+
+ cpqhp_resource_sort_and_combine(&(ctrl->mem_head));
+ cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head));
+ cpqhp_resource_sort_and_combine(&(ctrl->io_head));
+ cpqhp_resource_sort_and_combine(&(ctrl->bus_head));
+
+ if (is_bridge(func)) {
+ bridge_slot_remove(func);
+ } else
+ slot_remove(func);
+
+ func = cpqhp_slot_find(ctrl->bus, device, 0);
+ }
+
+ /* Setup slot structure with entry for empty slot */
+ func = cpqhp_slot_create(ctrl->bus);
+
+ if (func == NULL)
+ return 1;
+
+ func->bus = ctrl->bus;
+ func->device = device;
+ func->function = 0;
+ func->configured = 0;
+ func->switch_save = 0x10;
+ func->is_a_board = 0;
+ func->p_task_event = NULL;
+ }
+
+ return 0;
+}
+
+static void pushbutton_helper_thread(unsigned long data)
+{
+ pushbutton_pending = data;
+ up(&event_semaphore);
+}
+
+
+/* this is the main worker thread */
+static int event_thread(void* data)
+{
+ struct controller *ctrl;
+ lock_kernel();
+ daemonize("phpd_event");
+
+ unlock_kernel();
+
+ while (1) {
+ dbg("!!!!event_thread sleeping\n");
+ down_interruptible (&event_semaphore);
+ dbg("event_thread woken finished = %d\n", event_finished);
+ if (event_finished) break;
+ /* Do stuff here */
+ if (pushbutton_pending)
+ cpqhp_pushbutton_thread(pushbutton_pending);
+ else
+ for (ctrl = cpqhp_ctrl_list; ctrl; ctrl=ctrl->next)
+ interrupt_event_handler(ctrl);
+ }
+ dbg("event_thread signals exit\n");
+ up(&event_exit);
+ return 0;
+}
+
+
+int cpqhp_event_start_thread(void)
+{
+ int pid;
+
+ /* initialize our semaphores */
+ init_MUTEX(&delay_sem);
+ init_MUTEX_LOCKED(&event_semaphore);
+ init_MUTEX_LOCKED(&event_exit);
+ event_finished=0;
+
+ pid = kernel_thread(event_thread, NULL, 0);
+ if (pid < 0) {
+ err ("Can't start up our event thread\n");
+ return -1;
+ }
+ dbg("Our event thread pid = %d\n", pid);
+ return 0;
+}
+
+
+void cpqhp_event_stop_thread(void)
+{
+ event_finished = 1;
+ dbg("event_thread finish command given\n");
+ up(&event_semaphore);
+ dbg("wait for event_thread to exit\n");
+ down(&event_exit);
+}
+
+
+static int update_slot_info(struct controller *ctrl, struct slot *slot)
+{
+ struct hotplug_slot_info *info;
+ int result;
+
+ info = kmalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->power_status = get_slot_enabled(ctrl, slot);
+ info->attention_status = cpq_get_attention_status(ctrl, slot);
+ info->latch_status = cpq_get_latch_status(ctrl, slot);
+ info->adapter_status = get_presence_status(ctrl, slot);
+ result = pci_hp_change_slot_info(slot->hotplug_slot, info);
+ kfree (info);
+ return result;
+}
+
+static void interrupt_event_handler(struct controller *ctrl)
+{
+ int loop = 0;
+ int change = 1;
+ struct pci_func *func;
+ u8 hp_slot;
+ struct slot *p_slot;
+
+ while (change) {
+ change = 0;
+
+ for (loop = 0; loop < 10; loop++) {
+ /* dbg("loop %d\n", loop); */
+ if (ctrl->event_queue[loop].event_type != 0) {
+ hp_slot = ctrl->event_queue[loop].hp_slot;
+
+ func = cpqhp_slot_find(ctrl->bus, (hp_slot + ctrl->slot_device_offset), 0);
+ if (!func)
+ return;
+
+ p_slot = cpqhp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+ if (!p_slot)
+ return;
+
+ dbg("hp_slot %d, func %p, p_slot %p\n",
+ hp_slot, func, p_slot);
+
+ if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
+ dbg("button pressed\n");
+ } else if (ctrl->event_queue[loop].event_type ==
+ INT_BUTTON_CANCEL) {
+ dbg("button cancel\n");
+ del_timer(&p_slot->task_event);
+
+ down(&ctrl->crit_sect);
+
+ if (p_slot->state == BLINKINGOFF_STATE) {
+ /* slot is on */
+ dbg("turn on green LED\n");
+ green_LED_on (ctrl, hp_slot);
+ } else if (p_slot->state == BLINKINGON_STATE) {
+ /* slot is off */
+ dbg("turn off green LED\n");
+ green_LED_off (ctrl, hp_slot);
+ }
+
+ info(msg_button_cancel, p_slot->number);
+
+ p_slot->state = STATIC_STATE;
+
+ amber_LED_off (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+ }
+ /*** button Released (No action on press...) */
+ else if (ctrl->event_queue[loop].event_type == INT_BUTTON_RELEASE) {
+ dbg("button release\n");
+
+ if (is_slot_enabled (ctrl, hp_slot)) {
+ dbg("slot is on\n");
+ p_slot->state = BLINKINGOFF_STATE;
+ info(msg_button_off, p_slot->number);
+ } else {
+ dbg("slot is off\n");
+ p_slot->state = BLINKINGON_STATE;
+ info(msg_button_on, p_slot->number);
+ }
+ down(&ctrl->crit_sect);
+
+ dbg("blink green LED and turn off amber\n");
+
+ amber_LED_off (ctrl, hp_slot);
+ green_LED_blink (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+
+ up(&ctrl->crit_sect);
+ init_timer(&p_slot->task_event);
+ p_slot->hp_slot = hp_slot;
+ p_slot->ctrl = ctrl;
+/* p_slot->physical_slot = physical_slot; */
+ p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
+ p_slot->task_event.function = pushbutton_helper_thread;
+ p_slot->task_event.data = (u32) p_slot;
+
+ dbg("add_timer p_slot = %p\n", p_slot);
+ add_timer(&p_slot->task_event);
+ }
+ /***********POWER FAULT */
+ else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
+ dbg("power fault\n");
+ } else {
+ /* refresh notification */
+ if (p_slot)
+ update_slot_info(ctrl, p_slot);
+ }
+
+ ctrl->event_queue[loop].event_type = 0;
+
+ change = 1;
+ }
+ } /* End of FOR loop */
+ }
+
+ return;
+}
+
+
+/**
+ * cpqhp_pushbutton_thread
+ *
+ * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Handles all pending events and exits.
+ *
+ */
+void cpqhp_pushbutton_thread(unsigned long slot)
+{
+ u8 hp_slot;
+ u8 device;
+ struct pci_func *func;
+ struct slot *p_slot = (struct slot *) slot;
+ struct controller *ctrl = (struct controller *) p_slot->ctrl;
+
+ pushbutton_pending = 0;
+ hp_slot = p_slot->hp_slot;
+
+ device = p_slot->device;
+
+ if (is_slot_enabled(ctrl, hp_slot)) {
+ p_slot->state = POWEROFF_STATE;
+ /* power Down board */
+ func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
+ dbg("In power_down_board, func = %p, ctrl = %p\n", func, ctrl);
+ if (!func) {
+ dbg("Error! func NULL in %s\n", __FUNCTION__);
+ return ;
+ }
+
+ if (func != NULL && ctrl != NULL) {
+ if (cpqhp_process_SS(ctrl, func) != 0) {
+ amber_LED_on (ctrl, hp_slot);
+ green_LED_on (ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+ }
+ }
+
+ p_slot->state = STATIC_STATE;
+ } else {
+ p_slot->state = POWERON_STATE;
+ /* slot is off */
+
+ func = cpqhp_slot_find(p_slot->bus, p_slot->device, 0);
+ dbg("In add_board, func = %p, ctrl = %p\n", func, ctrl);
+ if (!func) {
+ dbg("Error! func NULL in %s\n", __FUNCTION__);
+ return ;
+ }
+
+ if (func != NULL && ctrl != NULL) {
+ if (cpqhp_process_SI(ctrl, func) != 0) {
+ amber_LED_on(ctrl, hp_slot);
+ green_LED_off(ctrl, hp_slot);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+ }
+ }
+
+ p_slot->state = STATIC_STATE;
+ }
+
+ return;
+}
+
+
+int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func)
+{
+ u8 device, hp_slot;
+ u16 temp_word;
+ u32 tempdword;
+ int rc;
+ struct slot* p_slot;
+ int physical_slot = 0;
+
+ tempdword = 0;
+
+ device = func->device;
+ hp_slot = device - ctrl->slot_device_offset;
+ p_slot = cpqhp_find_slot(ctrl, device);
+ if (p_slot)
+ physical_slot = p_slot->number;
+
+ /* Check to see if the interlock is closed */
+ tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ if (tempdword & (0x01 << hp_slot)) {
+ return 1;
+ }
+
+ if (func->is_a_board) {
+ rc = board_replaced(func, ctrl);
+ } else {
+ /* add board */
+ slot_remove(func);
+
+ func = cpqhp_slot_create(ctrl->bus);
+ if (func == NULL)
+ return 1;
+
+ func->bus = ctrl->bus;
+ func->device = device;
+ func->function = 0;
+ func->configured = 0;
+ func->is_a_board = 1;
+
+ /* We have to save the presence info for these slots */
+ temp_word = ctrl->ctrl_int_comp >> 16;
+ func->presence_save = (temp_word >> hp_slot) & 0x01;
+ func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
+
+ if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+ func->switch_save = 0;
+ } else {
+ func->switch_save = 0x10;
+ }
+
+ rc = board_added(func, ctrl);
+ if (rc) {
+ if (is_bridge(func)) {
+ bridge_slot_remove(func);
+ } else
+ slot_remove(func);
+
+ /* Setup slot structure with entry for empty slot */
+ func = cpqhp_slot_create(ctrl->bus);
+
+ if (func == NULL)
+ return 1;
+
+ func->bus = ctrl->bus;
+ func->device = device;
+ func->function = 0;
+ func->configured = 0;
+ func->is_a_board = 0;
+
+ /* We have to save the presence info for these slots */
+ temp_word = ctrl->ctrl_int_comp >> 16;
+ func->presence_save = (temp_word >> hp_slot) & 0x01;
+ func->presence_save |=
+ (temp_word >> (hp_slot + 7)) & 0x02;
+
+ if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
+ func->switch_save = 0;
+ } else {
+ func->switch_save = 0x10;
+ }
+ }
+ }
+
+ if (rc) {
+ dbg("%s: rc = %d\n", __FUNCTION__, rc);
+ }
+
+ if (p_slot)
+ update_slot_info(ctrl, p_slot);
+
+ return rc;
+}
+
+
+int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
+{
+ u8 device, class_code, header_type, BCR;
+ u8 index = 0;
+ u8 replace_flag;
+ u32 rc = 0;
+ unsigned int devfn;
+ struct slot* p_slot;
+ struct pci_bus *pci_bus = ctrl->pci_bus;
+ int physical_slot=0;
+
+ device = func->device;
+ func = cpqhp_slot_find(ctrl->bus, device, index++);
+ p_slot = cpqhp_find_slot(ctrl, device);
+ if (p_slot) {
+ physical_slot = p_slot->number;
+ }
+
+ /* Make sure there are no video controllers here */
+ while (func && !rc) {
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Check the Class Code */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+ if (rc)
+ return rc;
+
+ if (class_code == PCI_BASE_CLASS_DISPLAY) {
+ /* Display/Video adapter (not supported) */
+ rc = REMOVE_NOT_SUPPORTED;
+ } else {
+ /* See if it's a bridge */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type);
+ if (rc)
+ return rc;
+
+ /* If it's a bridge, check the VGA Enable bit */
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR);
+ if (rc)
+ return rc;
+
+ /* If the VGA Enable bit is set, remove isn't
+ * supported */
+ if (BCR & PCI_BRIDGE_CTL_VGA) {
+ rc = REMOVE_NOT_SUPPORTED;
+ }
+ }
+ }
+
+ func = cpqhp_slot_find(ctrl->bus, device, index++);
+ }
+
+ func = cpqhp_slot_find(ctrl->bus, device, 0);
+ if ((func != NULL) && !rc) {
+ /* FIXME: Replace flag should be passed into process_SS */
+ replace_flag = !(ctrl->add_support);
+ rc = remove_board(func, replace_flag, ctrl);
+ } else if (!rc) {
+ rc = 1;
+ }
+
+ if (p_slot)
+ update_slot_info(ctrl, p_slot);
+
+ return rc;
+}
+
+/**
+ * switch_leds: switch the leds, go from one site to the other.
+ * @ctrl: controller to use
+ * @num_of_slots: number of slots to use
+ * @direction: 1 to start from the left side, 0 to start right.
+ */
+static void switch_leds(struct controller *ctrl, const int num_of_slots,
+ u32 *work_LED, const int direction)
+{
+ int loop;
+
+ for (loop = 0; loop < num_of_slots; loop++) {
+ if (direction)
+ *work_LED = *work_LED >> 1;
+ else
+ *work_LED = *work_LED << 1;
+ writel(*work_LED, ctrl->hpc_reg + LED_CONTROL);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOGO interrupt */
+ wait_for_ctrl_irq(ctrl);
+
+ /* Get ready for next iteration */
+ long_delay((2*HZ)/10);
+ }
+}
+
+/**
+ * hardware_test - runs hardware tests
+ *
+ * For hot plug ctrl folks to play with.
+ * test_num is the number written to the "test" file in sysfs
+ *
+ */
+int cpqhp_hardware_test(struct controller *ctrl, int test_num)
+{
+ u32 save_LED;
+ u32 work_LED;
+ int loop;
+ int num_of_slots;
+
+ num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0f;
+
+ switch (test_num) {
+ case 1:
+ /* Do stuff here! */
+
+ /* Do that funky LED thing */
+ /* so we can restore them later */
+ save_LED = readl(ctrl->hpc_reg + LED_CONTROL);
+ work_LED = 0x01010101;
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+ work_LED = 0x01010000;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+ work_LED = 0x00000101;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ switch_leds(ctrl, num_of_slots, &work_LED, 0);
+ switch_leds(ctrl, num_of_slots, &work_LED, 1);
+
+ work_LED = 0x01010000;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ for (loop = 0; loop < num_of_slots; loop++) {
+ set_SOGO(ctrl);
+
+ /* Wait for SOGO interrupt */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Get ready for next iteration */
+ long_delay((3*HZ)/10);
+ work_LED = work_LED >> 16;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOGO interrupt */
+ wait_for_ctrl_irq (ctrl);
+
+ /* Get ready for next iteration */
+ long_delay((3*HZ)/10);
+ work_LED = work_LED << 16;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ work_LED = work_LED << 1;
+ writel(work_LED, ctrl->hpc_reg + LED_CONTROL);
+ }
+
+ /* put it back the way it was */
+ writel(save_LED, ctrl->hpc_reg + LED_CONTROL);
+
+ set_SOGO(ctrl);
+
+ /* Wait for SOBS to be unset */
+ wait_for_ctrl_irq (ctrl);
+ break;
+ case 2:
+ /* Do other stuff here! */
+ break;
+ case 3:
+ /* and more... */
+ break;
+ }
+ return 0;
+}
+
+
+/**
+ * configure_new_device - Configures the PCI header information of one board.
+ *
+ * @ctrl: pointer to controller structure
+ * @func: pointer to function structure
+ * @behind_bridge: 1 if this is a recursive call, 0 if not
+ * @resources: pointer to set of resource lists
+ *
+ * Returns 0 if success
+ *
+ */
+static u32 configure_new_device(struct controller * ctrl, struct pci_func * func,
+ u8 behind_bridge, struct resource_lists * resources)
+{
+ u8 temp_byte, function, max_functions, stop_it;
+ int rc;
+ u32 ID;
+ struct pci_func *new_slot;
+ int index;
+
+ new_slot = func;
+
+ dbg("%s\n", __FUNCTION__);
+ /* Check for Multi-function device */
+ ctrl->pci_bus->number = func->bus;
+ rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(func->device, func->function), 0x0E, &temp_byte);
+ if (rc) {
+ dbg("%s: rc = %d\n", __FUNCTION__, rc);
+ return rc;
+ }
+
+ if (temp_byte & 0x80) /* Multi-function device */
+ max_functions = 8;
+ else
+ max_functions = 1;
+
+ function = 0;
+
+ do {
+ rc = configure_new_function(ctrl, new_slot, behind_bridge, resources);
+
+ if (rc) {
+ dbg("configure_new_function failed %d\n",rc);
+ index = 0;
+
+ while (new_slot) {
+ new_slot = cpqhp_slot_find(new_slot->bus, new_slot->device, index++);
+
+ if (new_slot)
+ cpqhp_return_board_resources(new_slot, resources);
+ }
+
+ return rc;
+ }
+
+ function++;
+
+ stop_it = 0;
+
+ /* The following loop skips to the next present function
+ * and creates a board structure */
+
+ while ((function < max_functions) && (!stop_it)) {
+ pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
+
+ if (ID == 0xFFFFFFFF) { /* There's nothing there. */
+ function++;
+ } else { /* There's something there */
+ /* Setup slot structure. */
+ new_slot = cpqhp_slot_create(func->bus);
+
+ if (new_slot == NULL)
+ return 1;
+
+ new_slot->bus = func->bus;
+ new_slot->device = func->device;
+ new_slot->function = function;
+ new_slot->is_a_board = 1;
+ new_slot->status = 0;
+
+ stop_it++;
+ }
+ }
+
+ } while (function < max_functions);
+ dbg("returning from configure_new_device\n");
+
+ return 0;
+}
+
+
+/*
+ Configuration logic that involves the hotplug data structures and
+ their bookkeeping
+ */
+
+
+/**
+ * configure_new_function - Configures the PCI header information of one device
+ *
+ * @ctrl: pointer to controller structure
+ * @func: pointer to function structure
+ * @behind_bridge: 1 if this is a recursive call, 0 if not
+ * @resources: pointer to set of resource lists
+ *
+ * Calls itself recursively for bridged devices.
+ * Returns 0 if success
+ *
+ */
+static int configure_new_function(struct controller *ctrl, struct pci_func *func,
+ u8 behind_bridge,
+ struct resource_lists *resources)
+{
+ int cloop;
+ u8 IRQ = 0;
+ u8 temp_byte;
+ u8 device;
+ u8 class_code;
+ u16 command;
+ u16 temp_word;
+ u32 temp_dword;
+ u32 rc;
+ u32 temp_register;
+ u32 base;
+ u32 ID;
+ unsigned int devfn;
+ struct pci_resource *mem_node;
+ struct pci_resource *p_mem_node;
+ struct pci_resource *io_node;
+ struct pci_resource *bus_node;
+ struct pci_resource *hold_mem_node;
+ struct pci_resource *hold_p_mem_node;
+ struct pci_resource *hold_IO_node;
+ struct pci_resource *hold_bus_node;
+ struct irq_mapping irqs;
+ struct pci_func *new_slot;
+ struct pci_bus *pci_bus;
+ struct resource_lists temp_resources;
+
+ pci_bus = ctrl->pci_bus;
+ pci_bus->number = func->bus;
+ devfn = PCI_DEVFN(func->device, func->function);
+
+ /* Check for Bridge */
+ rc = pci_bus_read_config_byte(pci_bus, devfn, PCI_HEADER_TYPE, &temp_byte);
+ if (rc)
+ return rc;
+
+ if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { /* PCI-PCI Bridge */
+ /* set Primary bus */
+ dbg("set Primary bus = %d\n", func->bus);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_PRIMARY_BUS, func->bus);
+ if (rc)
+ return rc;
+
+ /* find range of busses to use */
+ dbg("find ranges of buses to use\n");
+ bus_node = get_max_resource(&(resources->bus_head), 1);
+
+ /* If we don't have any busses to allocate, we can't continue */
+ if (!bus_node)
+ return -ENOMEM;
+
+ /* set Secondary bus */
+ temp_byte = bus_node->base;
+ dbg("set Secondary bus = %d\n", bus_node->base);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SECONDARY_BUS, temp_byte);
+ if (rc)
+ return rc;
+
+ /* set subordinate bus */
+ temp_byte = bus_node->base + bus_node->length - 1;
+ dbg("set subordinate bus = %d\n", bus_node->base + bus_node->length - 1);
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
+ if (rc)
+ return rc;
+
+ /* set subordinate Latency Timer and base Latency Timer */
+ temp_byte = 0x40;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_SEC_LATENCY_TIMER, temp_byte);
+ if (rc)
+ return rc;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_LATENCY_TIMER, temp_byte);
+ if (rc)
+ return rc;
+
+ /* set Cache Line size */
+ temp_byte = 0x08;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_CACHE_LINE_SIZE, temp_byte);
+ if (rc)
+ return rc;
+
+ /* Setup the IO, memory, and prefetchable windows */
+ io_node = get_max_resource(&(resources->io_head), 0x1000);
+ if (!io_node)
+ return -ENOMEM;
+ mem_node = get_max_resource(&(resources->mem_head), 0x100000);
+ if (!mem_node)
+ return -ENOMEM;
+ p_mem_node = get_max_resource(&(resources->p_mem_head), 0x100000);
+ if (!p_mem_node)
+ return -ENOMEM;
+ dbg("Setup the IO, memory, and prefetchable windows\n");
+ dbg("io_node\n");
+ dbg("(base, len, next) (%x, %x, %p)\n", io_node->base,
+ io_node->length, io_node->next);
+ dbg("mem_node\n");
+ dbg("(base, len, next) (%x, %x, %p)\n", mem_node->base,
+ mem_node->length, mem_node->next);
+ dbg("p_mem_node\n");
+ dbg("(base, len, next) (%x, %x, %p)\n", p_mem_node->base,
+ p_mem_node->length, p_mem_node->next);
+
+ /* set up the IRQ info */
+ if (!resources->irqs) {
+ irqs.barber_pole = 0;
+ irqs.interrupt[0] = 0;
+ irqs.interrupt[1] = 0;
+ irqs.interrupt[2] = 0;
+ irqs.interrupt[3] = 0;
+ irqs.valid_INT = 0;
+ } else {
+ irqs.barber_pole = resources->irqs->barber_pole;
+ irqs.interrupt[0] = resources->irqs->interrupt[0];
+ irqs.interrupt[1] = resources->irqs->interrupt[1];
+ irqs.interrupt[2] = resources->irqs->interrupt[2];
+ irqs.interrupt[3] = resources->irqs->interrupt[3];
+ irqs.valid_INT = resources->irqs->valid_INT;
+ }
+
+ /* set up resource lists that are now aligned on top and bottom
+ * for anything behind the bridge. */
+ temp_resources.bus_head = bus_node;
+ temp_resources.io_head = io_node;
+ temp_resources.mem_head = mem_node;
+ temp_resources.p_mem_head = p_mem_node;
+ temp_resources.irqs = &irqs;
+
+ /* Make copies of the nodes we are going to pass down so that
+ * if there is a problem,we can just use these to free resources */
+ hold_bus_node = kmalloc(sizeof(*hold_bus_node), GFP_KERNEL);
+ hold_IO_node = kmalloc(sizeof(*hold_IO_node), GFP_KERNEL);
+ hold_mem_node = kmalloc(sizeof(*hold_mem_node), GFP_KERNEL);
+ hold_p_mem_node = kmalloc(sizeof(*hold_p_mem_node), GFP_KERNEL);
+
+ if (!hold_bus_node || !hold_IO_node || !hold_mem_node || !hold_p_mem_node) {
+ kfree(hold_bus_node);
+ kfree(hold_IO_node);
+ kfree(hold_mem_node);
+ kfree(hold_p_mem_node);
+
+ return 1;
+ }
+
+ memcpy(hold_bus_node, bus_node, sizeof(struct pci_resource));
+
+ bus_node->base += 1;
+ bus_node->length -= 1;
+ bus_node->next = NULL;
+
+ /* If we have IO resources copy them and fill in the bridge's
+ * IO range registers */
+ if (io_node) {
+ memcpy(hold_IO_node, io_node, sizeof(struct pci_resource));
+ io_node->next = NULL;
+
+ /* set IO base and Limit registers */
+ temp_byte = io_node->base >> 8;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_BASE, temp_byte);
+
+ temp_byte = (io_node->base + io_node->length - 1) >> 8;
+ rc = pci_bus_write_config_byte(pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+ } else {
+ kfree(hold_IO_node);
+ hold_IO_node = NULL;
+ }
+
+ /* If we have memory resources copy them and fill in the
+ * bridge's memory range registers. Otherwise, fill in the
+ * range registers with values that disable them. */
+ if (mem_node) {
+ memcpy(hold_mem_node, mem_node, sizeof(struct pci_resource));
+ mem_node->next = NULL;
+
+ /* set Mem base and Limit registers */
+ temp_word = mem_node->base >> 16;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+ temp_word = (mem_node->base + mem_node->length - 1) >> 16;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+ } else {
+ temp_word = 0xFFFF;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word(pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+ kfree(hold_mem_node);
+ hold_mem_node = NULL;
+ }
+
+ /* If we have prefetchable memory resources copy them and
+ * fill in the bridge's memory range registers. Otherwise,
+ * fill in the range registers with values that disable them. */
+ if (p_mem_node) {
+ memcpy(hold_p_mem_node, p_mem_node, sizeof(struct pci_resource));
+ p_mem_node->next = NULL;
+
+ /* set Pre Mem base and Limit registers */
+ temp_word = p_mem_node->base >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+ temp_word = (p_mem_node->base + p_mem_node->length - 1) >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+ } else {
+ temp_word = 0xFFFF;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+ kfree(hold_p_mem_node);
+ hold_p_mem_node = NULL;
+ }
+
+ /* Adjust this to compensate for extra adjustment in first loop */
+ irqs.barber_pole--;
+
+ rc = 0;
+
+ /* Here we actually find the devices and configure them */
+ for (device = 0; (device <= 0x1F) && !rc; device++) {
+ irqs.barber_pole = (irqs.barber_pole + 1) & 0x03;
+
+ ID = 0xFFFFFFFF;
+ pci_bus->number = hold_bus_node->base;
+ pci_bus_read_config_dword (pci_bus, PCI_DEVFN(device, 0), 0x00, &ID);
+ pci_bus->number = func->bus;
+
+ if (ID != 0xFFFFFFFF) { /* device present */
+ /* Setup slot structure. */
+ new_slot = cpqhp_slot_create(hold_bus_node->base);
+
+ if (new_slot == NULL) {
+ rc = -ENOMEM;
+ continue;
+ }
+
+ new_slot->bus = hold_bus_node->base;
+ new_slot->device = device;
+ new_slot->function = 0;
+ new_slot->is_a_board = 1;
+ new_slot->status = 0;
+
+ rc = configure_new_device(ctrl, new_slot, 1, &temp_resources);
+ dbg("configure_new_device rc=0x%x\n",rc);
+ } /* End of IF (device in slot?) */
+ } /* End of FOR loop */
+
+ if (rc)
+ goto free_and_out;
+ /* save the interrupt routing information */
+ if (resources->irqs) {
+ resources->irqs->interrupt[0] = irqs.interrupt[0];
+ resources->irqs->interrupt[1] = irqs.interrupt[1];
+ resources->irqs->interrupt[2] = irqs.interrupt[2];
+ resources->irqs->interrupt[3] = irqs.interrupt[3];
+ resources->irqs->valid_INT = irqs.valid_INT;
+ } else if (!behind_bridge) {
+ /* We need to hook up the interrupts here */
+ for (cloop = 0; cloop < 4; cloop++) {
+ if (irqs.valid_INT & (0x01 << cloop)) {
+ rc = cpqhp_set_irq(func->bus, func->device,
+ 0x0A + cloop, irqs.interrupt[cloop]);
+ if (rc)
+ goto free_and_out;
+ }
+ } /* end of for loop */
+ }
+ /* Return unused bus resources
+ * First use the temporary node to store information for
+ * the board */
+ if (hold_bus_node && bus_node && temp_resources.bus_head) {
+ hold_bus_node->length = bus_node->base - hold_bus_node->base;
+
+ hold_bus_node->next = func->bus_head;
+ func->bus_head = hold_bus_node;
+
+ temp_byte = temp_resources.bus_head->base - 1;
+
+ /* set subordinate bus */
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_SUBORDINATE_BUS, temp_byte);
+
+ if (temp_resources.bus_head->length == 0) {
+ kfree(temp_resources.bus_head);
+ temp_resources.bus_head = NULL;
+ } else {
+ return_resource(&(resources->bus_head), temp_resources.bus_head);
+ }
+ }
+
+ /* If we have IO space available and there is some left,
+ * return the unused portion */
+ if (hold_IO_node && temp_resources.io_head) {
+ io_node = do_pre_bridge_resource_split(&(temp_resources.io_head),
+ &hold_IO_node, 0x1000);
+
+ /* Check if we were able to split something off */
+ if (io_node) {
+ hold_IO_node->base = io_node->base + io_node->length;
+
+ temp_byte = (hold_IO_node->base) >> 8;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_BASE, temp_byte);
+
+ return_resource(&(resources->io_head), io_node);
+ }
+
+ io_node = do_bridge_resource_split(&(temp_resources.io_head), 0x1000);
+
+ /* Check if we were able to split something off */
+ if (io_node) {
+ /* First use the temporary node to store
+ * information for the board */
+ hold_IO_node->length = io_node->base - hold_IO_node->base;
+
+ /* If we used any, add it to the board's list */
+ if (hold_IO_node->length) {
+ hold_IO_node->next = func->io_head;
+ func->io_head = hold_IO_node;
+
+ temp_byte = (io_node->base - 1) >> 8;
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_IO_LIMIT, temp_byte);
+
+ return_resource(&(resources->io_head), io_node);
+ } else {
+ /* it doesn't need any IO */
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_IO_LIMIT, temp_word);
+
+ return_resource(&(resources->io_head), io_node);
+ kfree(hold_IO_node);
+ }
+ } else {
+ /* it used most of the range */
+ hold_IO_node->next = func->io_head;
+ func->io_head = hold_IO_node;
+ }
+ } else if (hold_IO_node) {
+ /* it used the whole range */
+ hold_IO_node->next = func->io_head;
+ func->io_head = hold_IO_node;
+ }
+ /* If we have memory space available and there is some left,
+ * return the unused portion */
+ if (hold_mem_node && temp_resources.mem_head) {
+ mem_node = do_pre_bridge_resource_split(&(temp_resources. mem_head),
+ &hold_mem_node, 0x100000);
+
+ /* Check if we were able to split something off */
+ if (mem_node) {
+ hold_mem_node->base = mem_node->base + mem_node->length;
+
+ temp_word = (hold_mem_node->base) >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_BASE, temp_word);
+
+ return_resource(&(resources->mem_head), mem_node);
+ }
+
+ mem_node = do_bridge_resource_split(&(temp_resources.mem_head), 0x100000);
+
+ /* Check if we were able to split something off */
+ if (mem_node) {
+ /* First use the temporary node to store
+ * information for the board */
+ hold_mem_node->length = mem_node->base - hold_mem_node->base;
+
+ if (hold_mem_node->length) {
+ hold_mem_node->next = func->mem_head;
+ func->mem_head = hold_mem_node;
+
+ /* configure end address */
+ temp_word = (mem_node->base - 1) >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+ /* Return unused resources to the pool */
+ return_resource(&(resources->mem_head), mem_node);
+ } else {
+ /* it doesn't need any Mem */
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_MEMORY_LIMIT, temp_word);
+
+ return_resource(&(resources->mem_head), mem_node);
+ kfree(hold_mem_node);
+ }
+ } else {
+ /* it used most of the range */
+ hold_mem_node->next = func->mem_head;
+ func->mem_head = hold_mem_node;
+ }
+ } else if (hold_mem_node) {
+ /* it used the whole range */
+ hold_mem_node->next = func->mem_head;
+ func->mem_head = hold_mem_node;
+ }
+ /* If we have prefetchable memory space available and there
+ * is some left at the end, return the unused portion */
+ if (hold_p_mem_node && temp_resources.p_mem_head) {
+ p_mem_node = do_pre_bridge_resource_split(&(temp_resources.p_mem_head),
+ &hold_p_mem_node, 0x100000);
+
+ /* Check if we were able to split something off */
+ if (p_mem_node) {
+ hold_p_mem_node->base = p_mem_node->base + p_mem_node->length;
+
+ temp_word = (hold_p_mem_node->base) >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_BASE, temp_word);
+
+ return_resource(&(resources->p_mem_head), p_mem_node);
+ }
+
+ p_mem_node = do_bridge_resource_split(&(temp_resources.p_mem_head), 0x100000);
+
+ /* Check if we were able to split something off */
+ if (p_mem_node) {
+ /* First use the temporary node to store
+ * information for the board */
+ hold_p_mem_node->length = p_mem_node->base - hold_p_mem_node->base;
+
+ /* If we used any, add it to the board's list */
+ if (hold_p_mem_node->length) {
+ hold_p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = hold_p_mem_node;
+
+ temp_word = (p_mem_node->base - 1) >> 16;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+ return_resource(&(resources->p_mem_head), p_mem_node);
+ } else {
+ /* it doesn't need any PMem */
+ temp_word = 0x0000;
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, temp_word);
+
+ return_resource(&(resources->p_mem_head), p_mem_node);
+ kfree(hold_p_mem_node);
+ }
+ } else {
+ /* it used the most of the range */
+ hold_p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = hold_p_mem_node;
+ }
+ } else if (hold_p_mem_node) {
+ /* it used the whole range */
+ hold_p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = hold_p_mem_node;
+ }
+ /* We should be configuring an IRQ and the bridge's base address
+ * registers if it needs them. Although we have never seen such
+ * a device */
+
+ /* enable card */
+ command = 0x0157; /* = PCI_COMMAND_IO |
+ * PCI_COMMAND_MEMORY |
+ * PCI_COMMAND_MASTER |
+ * PCI_COMMAND_INVALIDATE |
+ * PCI_COMMAND_PARITY |
+ * PCI_COMMAND_SERR */
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_COMMAND, command);
+
+ /* set Bridge Control Register */
+ command = 0x07; /* = PCI_BRIDGE_CTL_PARITY |
+ * PCI_BRIDGE_CTL_SERR |
+ * PCI_BRIDGE_CTL_NO_ISA */
+ rc = pci_bus_write_config_word (pci_bus, devfn, PCI_BRIDGE_CONTROL, command);
+ } else if ((temp_byte & 0x7F) == PCI_HEADER_TYPE_NORMAL) {
+ /* Standard device */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+
+ if (class_code == PCI_BASE_CLASS_DISPLAY) {
+ /* Display (video) adapter (not supported) */
+ return DEVICE_TYPE_NOT_SUPPORTED;
+ }
+ /* Figure out IO and memory needs */
+ for (cloop = 0x10; cloop <= 0x24; cloop += 4) {
+ temp_register = 0xFFFFFFFF;
+
+ dbg("CND: bus=%d, devfn=%d, offset=%d\n", pci_bus->number, devfn, cloop);
+ rc = pci_bus_write_config_dword (pci_bus, devfn, cloop, temp_register);
+
+ rc = pci_bus_read_config_dword (pci_bus, devfn, cloop, &temp_register);
+ dbg("CND: base = 0x%x\n", temp_register);
+
+ if (temp_register) { /* If this register is implemented */
+ if ((temp_register & 0x03L) == 0x01) {
+ /* Map IO */
+
+ /* set base = amount of IO space */
+ base = temp_register & 0xFFFFFFFC;
+ base = ~base + 1;
+
+ dbg("CND: length = 0x%x\n", base);
+ io_node = get_io_resource(&(resources->io_head), base);
+ dbg("Got io_node start = %8.8x, length = %8.8x next (%p)\n",
+ io_node->base, io_node->length, io_node->next);
+ dbg("func (%p) io_head (%p)\n", func, func->io_head);
+
+ /* allocate the resource to the board */
+ if (io_node) {
+ base = io_node->base;
+
+ io_node->next = func->io_head;
+ func->io_head = io_node;
+ } else
+ return -ENOMEM;
+ } else if ((temp_register & 0x0BL) == 0x08) {
+ /* Map prefetchable memory */
+ base = temp_register & 0xFFFFFFF0;
+ base = ~base + 1;
+
+ dbg("CND: length = 0x%x\n", base);
+ p_mem_node = get_resource(&(resources->p_mem_head), base);
+
+ /* allocate the resource to the board */
+ if (p_mem_node) {
+ base = p_mem_node->base;
+
+ p_mem_node->next = func->p_mem_head;
+ func->p_mem_head = p_mem_node;
+ } else
+ return -ENOMEM;
+ } else if ((temp_register & 0x0BL) == 0x00) {
+ /* Map memory */
+ base = temp_register & 0xFFFFFFF0;
+ base = ~base + 1;
+
+ dbg("CND: length = 0x%x\n", base);
+ mem_node = get_resource(&(resources->mem_head), base);
+
+ /* allocate the resource to the board */
+ if (mem_node) {
+ base = mem_node->base;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ } else
+ return -ENOMEM;
+ } else if ((temp_register & 0x0BL) == 0x04) {
+ /* Map memory */
+ base = temp_register & 0xFFFFFFF0;
+ base = ~base + 1;
+
+ dbg("CND: length = 0x%x\n", base);
+ mem_node = get_resource(&(resources->mem_head), base);
+
+ /* allocate the resource to the board */
+ if (mem_node) {
+ base = mem_node->base;
+
+ mem_node->next = func->mem_head;
+ func->mem_head = mem_node;
+ } else
+ return -ENOMEM;
+ } else if ((temp_register & 0x0BL) == 0x06) {
+ /* Those bits are reserved, we can't handle this */
+ return 1;
+ } else {
+ /* Requesting space below 1M */
+ return NOT_ENOUGH_RESOURCES;
+ }
+
+ rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
+
+ /* Check for 64-bit base */
+ if ((temp_register & 0x07L) == 0x04) {
+ cloop += 4;
+
+ /* Upper 32 bits of address always zero
+ * on today's systems */
+ /* FIXME this is probably not true on
+ * Alpha and ia64??? */
+ base = 0;
+ rc = pci_bus_write_config_dword(pci_bus, devfn, cloop, base);
+ }
+ }
+ } /* End of base register loop */
+ if (cpqhp_legacy_mode) {
+ /* Figure out which interrupt pin this function uses */
+ rc = pci_bus_read_config_byte (pci_bus, devfn,
+ PCI_INTERRUPT_PIN, &temp_byte);
+
+ /* If this function needs an interrupt and we are behind
+ * a bridge and the pin is tied to something that's
+ * alread mapped, set this one the same */
+ if (temp_byte && resources->irqs &&
+ (resources->irqs->valid_INT &
+ (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {
+ /* We have to share with something already set up */
+ IRQ = resources->irqs->interrupt[(temp_byte +
+ resources->irqs->barber_pole - 1) & 0x03];
+ } else {
+ /* Program IRQ based on card type */
+ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code);
+
+ if (class_code == PCI_BASE_CLASS_STORAGE) {
+ IRQ = cpqhp_disk_irq;
+ } else {
+ IRQ = cpqhp_nic_irq;
+ }
+ }
+
+ /* IRQ Line */
+ rc = pci_bus_write_config_byte (pci_bus, devfn, PCI_INTERRUPT_LINE, IRQ);
+ }
+
+ if (!behind_bridge) {
+ rc = cpqhp_set_irq(func->bus, func->device, temp_byte + 0x09, IRQ);
+ if (rc)
+ return 1;
+ } else {
+ /* TBD - this code may also belong in the other clause
+ * of this If statement */
+ resources->irqs->interrupt[(temp_byte + resources->irqs->barber_pole - 1) & 0x03] = IRQ;
+ resources->irqs->valid_INT |= 0x01 << (temp_byte + resources->irqs->barber_pole - 1) & 0x03;
+ }
+
+ /* Latency Timer */
+ temp_byte = 0x40;
+ rc = pci_bus_write_config_byte(pci_bus, devfn,
+ PCI_LATENCY_TIMER, temp_byte);
+
+ /* Cache Line size */
+ temp_byte = 0x08;
+ rc = pci_bus_write_config_byte(pci_bus, devfn,
+ PCI_CACHE_LINE_SIZE, temp_byte);
+
+ /* disable ROM base Address */
+ temp_dword = 0x00L;
+ rc = pci_bus_write_config_word(pci_bus, devfn,
+ PCI_ROM_ADDRESS, temp_dword);
+
+ /* enable card */
+ temp_word = 0x0157; /* = PCI_COMMAND_IO |
+ * PCI_COMMAND_MEMORY |
+ * PCI_COMMAND_MASTER |
+ * PCI_COMMAND_INVALIDATE |
+ * PCI_COMMAND_PARITY |
+ * PCI_COMMAND_SERR */
+ rc = pci_bus_write_config_word (pci_bus, devfn,
+ PCI_COMMAND, temp_word);
+ } else { /* End of Not-A-Bridge else */
+ /* It's some strange type of PCI adapter (Cardbus?) */
+ return DEVICE_TYPE_NOT_SUPPORTED;
+ }
+
+ func->configured = 1;
+
+ return 0;
+free_and_out:
+ cpqhp_destroy_resource_list (&temp_resources);
+
+ return_resource(&(resources-> bus_head), hold_bus_node);
+ return_resource(&(resources-> io_head), hold_IO_node);
+ return_resource(&(resources-> mem_head), hold_mem_node);
+ return_resource(&(resources-> p_mem_head), hold_p_mem_node);
+ return rc;
+}