diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h
new file mode 100644
index 0000000..5bc039d
--- /dev/null
+++ b/drivers/pci/hotplug/ibmphp.h
@@ -0,0 +1,763 @@
+#ifndef __IBMPHP_H
+#define __IBMPHP_H
+
+/*
+ * IBM Hot Plug Controller Driver
+ *
+ * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
+ *
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001-2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gregkh@us.ibm.com>
+ *
+ */
+
+#include "pci_hotplug.h"
+
+extern int ibmphp_debug;
+
+#if !defined(MODULE)
+	#define MY_NAME "ibmphpd"
+#else
+	#define MY_NAME THIS_MODULE->name
+#endif
+#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
+#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt , MY_NAME , ## arg); } while (0)
+#define err(format, arg...) printk(KERN_ERR "%s: " format , MY_NAME , ## arg)
+#define info(format, arg...) printk(KERN_INFO "%s: " format , MY_NAME , ## arg)
+#define warn(format, arg...) printk(KERN_WARNING "%s: " format , MY_NAME , ## arg)
+
+
+/* EBDA stuff */
+
+/***********************************************************
+* SLOT CAPABILITY                                          *
+***********************************************************/
+
+#define EBDA_SLOT_133_MAX		0x20
+#define EBDA_SLOT_100_MAX		0x10
+#define EBDA_SLOT_66_MAX		0x02
+#define EBDA_SLOT_PCIX_CAP		0x08
+
+
+/************************************************************
+*  RESOURE TYPE                                             *
+************************************************************/
+
+#define EBDA_RSRC_TYPE_MASK		0x03
+#define EBDA_IO_RSRC_TYPE		0x00
+#define EBDA_MEM_RSRC_TYPE		0x01
+#define EBDA_PFM_RSRC_TYPE		0x03
+#define EBDA_RES_RSRC_TYPE		0x02
+
+
+/*************************************************************
+*  IO RESTRICTION TYPE                                       *
+*************************************************************/
+
+#define EBDA_IO_RESTRI_MASK		0x0c
+#define EBDA_NO_RESTRI			0x00
+#define EBDA_AVO_VGA_ADDR		0x04
+#define EBDA_AVO_VGA_ADDR_AND_ALIA	0x08
+#define EBDA_AVO_ISA_ADDR		0x0c
+
+
+/**************************************************************
+*  DEVICE TYPE DEF                                            *
+**************************************************************/
+
+#define EBDA_DEV_TYPE_MASK		0x10
+#define EBDA_PCI_DEV			0x10
+#define EBDA_NON_PCI_DEV		0x00
+
+
+/***************************************************************
+*  PRIMARY DEF DEFINITION                                      *
+***************************************************************/
+
+#define EBDA_PRI_DEF_MASK		0x20
+#define EBDA_PRI_PCI_BUS_INFO		0x20
+#define EBDA_NORM_DEV_RSRC_INFO		0x00
+
+
+//--------------------------------------------------------------
+// RIO TABLE DATA STRUCTURE
+//--------------------------------------------------------------
+
+struct rio_table_hdr {
+	u8 ver_num; 
+	u8 scal_count;
+	u8 riodev_count;
+	u16 offset;
+};
+
+//-------------------------------------------------------------
+// SCALABILITY DETAIL
+//-------------------------------------------------------------
+
+struct scal_detail {
+	u8 node_id;
+	u32 cbar;
+	u8 port0_node_connect;
+	u8 port0_port_connect;
+	u8 port1_node_connect;
+	u8 port1_port_connect;
+	u8 port2_node_connect;
+	u8 port2_port_connect;
+	u8 chassis_num;
+//	struct list_head scal_detail_list;
+};
+
+//--------------------------------------------------------------
+// RIO DETAIL 
+//--------------------------------------------------------------
+
+struct rio_detail {
+	u8 rio_node_id;
+	u32 bbar;
+	u8 rio_type;
+	u8 owner_id;
+	u8 port0_node_connect;
+	u8 port0_port_connect;
+	u8 port1_node_connect;
+	u8 port1_port_connect;
+	u8 first_slot_num;
+	u8 status;
+	u8 wpindex;
+	u8 chassis_num;
+	struct list_head rio_detail_list;
+};
+
+struct opt_rio {
+	u8 rio_type;
+	u8 chassis_num;
+	u8 first_slot_num;
+	u8 middle_num;
+	struct list_head opt_rio_list;
+};	
+
+struct opt_rio_lo {
+	u8 rio_type;
+	u8 chassis_num;
+	u8 first_slot_num;
+	u8 middle_num;
+	u8 pack_count;
+	struct list_head opt_rio_lo_list;
+};	
+
+/****************************************************************
+*  HPC DESCRIPTOR NODE                                          *
+****************************************************************/
+
+struct ebda_hpc_list {
+	u8 format;
+	u16 num_ctlrs;
+	short phys_addr;
+//      struct list_head ebda_hpc_list;
+};
+/*****************************************************************
+*   IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS           *
+*   STRUCTURE                                                    *
+*****************************************************************/
+
+struct ebda_hpc_slot {
+	u8 slot_num;
+	u32 slot_bus_num;
+	u8 ctl_index;
+	u8 slot_cap;
+};
+
+struct ebda_hpc_bus {
+	u32 bus_num;
+	u8 slots_at_33_conv;
+	u8 slots_at_66_conv;
+	u8 slots_at_66_pcix;
+	u8 slots_at_100_pcix;
+	u8 slots_at_133_pcix;
+};
+
+
+/********************************************************************
+*   THREE TYPE OF HOT PLUG CONTROLER                                *
+********************************************************************/
+
+struct isa_ctlr_access {
+	u16 io_start;
+	u16 io_end;
+};
+
+struct pci_ctlr_access {
+	u8 bus;
+	u8 dev_fun;
+};
+
+struct wpeg_i2c_ctlr_access {
+	ulong wpegbbar;
+	u8 i2c_addr;
+};
+
+#define HPC_DEVICE_ID		0x0246
+#define HPC_SUBSYSTEM_ID	0x0247
+#define HPC_PCI_OFFSET		0x40
+/*************************************************************************
+*   RSTC DESCRIPTOR NODE                                                 *
+*************************************************************************/
+
+struct ebda_rsrc_list {
+	u8 format;
+	u16 num_entries;
+	u16 phys_addr;
+	struct ebda_rsrc_list *next;
+};
+
+
+/***************************************************************************
+*   PCI RSRC NODE                                                          *
+***************************************************************************/
+
+struct ebda_pci_rsrc {
+	u8 rsrc_type;
+	u8 bus_num;
+	u8 dev_fun;
+	u32 start_addr;
+	u32 end_addr;
+	u8 marked;	/* for NVRAM */
+	struct list_head ebda_pci_rsrc_list;
+};
+
+
+/***********************************************************
+* BUS_INFO DATE STRUCTURE                                  *
+***********************************************************/
+
+struct bus_info {
+	u8 slot_min;
+	u8 slot_max;
+	u8 slot_count;
+	u8 busno;
+	u8 controller_id;
+	u8 current_speed;
+	u8 current_bus_mode;
+	u8 index;
+	u8 slots_at_33_conv;
+	u8 slots_at_66_conv;
+	u8 slots_at_66_pcix;
+	u8 slots_at_100_pcix;
+	u8 slots_at_133_pcix;
+	struct list_head bus_info_list;
+};
+
+
+/***********************************************************
+* GLOBAL VARIABLES                                         *
+***********************************************************/
+extern struct list_head ibmphp_ebda_pci_rsrc_head;
+extern struct list_head ibmphp_slot_head;
+/***********************************************************
+* FUNCTION PROTOTYPES                                      *
+***********************************************************/
+
+extern void ibmphp_free_ebda_hpc_queue (void);
+extern int ibmphp_access_ebda (void);
+extern struct slot *ibmphp_get_slot_from_physical_num (u8);
+extern int ibmphp_get_total_hp_slots (void);
+extern void ibmphp_free_ibm_slot (struct slot *);
+extern void ibmphp_free_bus_info_queue (void);
+extern void ibmphp_free_ebda_pci_rsrc_queue (void);
+extern struct bus_info *ibmphp_find_same_bus_num (u32);
+extern int ibmphp_get_bus_index (u8);
+extern u16 ibmphp_get_total_controllers (void);
+extern int ibmphp_register_pci (void);
+
+/* passed parameters */
+#define MEM		0
+#define IO		1
+#define PFMEM		2
+
+/* bit masks */
+#define RESTYPE		0x03
+#define IOMASK		0x00	/* will need to take its complement */
+#define MMASK		0x01
+#define PFMASK		0x03
+#define PCIDEVMASK	0x10	/* we should always have PCI devices */
+#define PRIMARYBUSMASK	0x20
+
+/* pci specific defines */
+#define PCI_VENDOR_ID_NOTVALID		0xFFFF
+#define PCI_HEADER_TYPE_MULTIDEVICE	0x80
+#define PCI_HEADER_TYPE_MULTIBRIDGE	0x81
+
+#define LATENCY		0x64
+#define CACHE		64
+#define DEVICEENABLE	0x015F		/* CPQ has 0x0157 */
+
+#define IOBRIDGE	0x1000		/* 4k */
+#define MEMBRIDGE	0x100000	/* 1M */
+
+/* irqs */
+#define SCSI_IRQ	0x09
+#define LAN_IRQ		0x0A
+#define OTHER_IRQ	0x0B
+
+/* Data Structures */
+
+/* type is of the form x x xx xx
+ *                     | |  |  |_ 00 - I/O, 01 - Memory, 11 - PFMemory
+ *                     | |  - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid
+ *                     | |    VGA and their aliases, 11 - Avoid ISA
+ *                     | - 1 - PCI device, 0 - non pci device
+ *                     - 1 - Primary PCI Bus Information (0 if Normal device)
+ * the IO restrictions [2:3] are only for primary buses
+ */
+
+
+/* we need this struct because there could be several resource blocks
+ * allocated per primary bus in the EBDA
+ */
+struct range_node {
+	int rangeno;
+	u32 start;
+	u32 end;
+	struct range_node *next;
+};
+
+struct bus_node {
+	u8 busno;
+	int noIORanges;
+	struct range_node *rangeIO;
+	int noMemRanges;
+	struct range_node *rangeMem;
+	int noPFMemRanges;
+	struct range_node *rangePFMem;
+	int needIOUpdate;
+	int needMemUpdate;
+	int needPFMemUpdate;
+	struct resource_node *firstIO;	/* first IO resource on the Bus */
+	struct resource_node *firstMem;	/* first memory resource on the Bus */
+	struct resource_node *firstPFMem;	/* first prefetchable memory resource on the Bus */
+	struct resource_node *firstPFMemFromMem;	/* when run out of pfmem available, taking from Mem */
+	struct list_head bus_list;
+};
+
+struct resource_node {
+	int rangeno;
+	u8 busno;
+	u8 devfunc;
+	u32 start;
+	u32 end;
+	u32 len;
+	int type;		/* MEM, IO, PFMEM */
+	u8 fromMem;		/* this is to indicate that the range is from
+				 * from the Memory bucket rather than from PFMem */
+	struct resource_node *next;
+	struct resource_node *nextRange;	/* for the other mem range on bus */
+};
+
+struct res_needed {
+	u32 mem;
+	u32 pfmem;
+	u32 io;
+	u8 not_correct;		/* needed for return */
+	int devices[32];	/* for device numbers behind this bridge */
+};
+
+/* functions */
+
+extern int ibmphp_rsrc_init (void);
+extern int ibmphp_add_resource (struct resource_node *);
+extern int ibmphp_remove_resource (struct resource_node *);
+extern int ibmphp_find_resource (struct bus_node *, u32, struct resource_node **, int);
+extern int ibmphp_check_resource (struct resource_node *, u8);
+extern int ibmphp_remove_bus (struct bus_node *, u8);
+extern void ibmphp_free_resources (void);
+extern int ibmphp_add_pfmem_from_mem (struct resource_node *);
+extern struct bus_node *ibmphp_find_res_bus (u8);
+extern void ibmphp_print_test (void);	/* for debugging purposes */
+
+extern void ibmphp_hpc_initvars (void);
+extern int ibmphp_hpc_readslot (struct slot *, u8, u8 *);
+extern int ibmphp_hpc_writeslot (struct slot *, u8);
+extern void ibmphp_lock_operations (void);
+extern void ibmphp_unlock_operations (void);
+extern int ibmphp_hpc_start_poll_thread (void);
+extern void ibmphp_hpc_stop_poll_thread (void);
+
+//----------------------------------------------------------------------------
+
+
+//----------------------------------------------------------------------------
+// HPC return codes
+//----------------------------------------------------------------------------
+#define FALSE				0x00
+#define TRUE				0x01
+#define HPC_ERROR			0xFF
+
+//-----------------------------------------------------------------------------
+// BUS INFO
+//-----------------------------------------------------------------------------
+#define BUS_SPEED			0x30
+#define BUS_MODE			0x40
+#define BUS_MODE_PCIX			0x01
+#define BUS_MODE_PCI			0x00
+#define BUS_SPEED_2			0x20
+#define BUS_SPEED_1			0x10
+#define BUS_SPEED_33			0x00
+#define BUS_SPEED_66			0x01
+#define BUS_SPEED_100			0x02
+#define BUS_SPEED_133			0x03
+#define BUS_SPEED_66PCIX		0x04
+#define BUS_SPEED_66UNKNOWN		0x05
+#define BUS_STATUS_AVAILABLE		0x01
+#define BUS_CONTROL_AVAILABLE		0x02
+#define SLOT_LATCH_REGS_SUPPORTED	0x10
+
+#define PRGM_MODEL_REV_LEVEL		0xF0
+#define MAX_ADAPTER_NONE		0x09
+
+//----------------------------------------------------------------------------
+// HPC 'write' operations/commands
+//----------------------------------------------------------------------------
+//	Command			Code	State	Write to reg
+//					Machine	at index
+//-------------------------	----	-------	------------
+#define HPC_CTLR_ENABLEIRQ	0x00	// N	15
+#define HPC_CTLR_DISABLEIRQ	0x01	// N	15
+#define HPC_SLOT_OFF		0x02	// Y	0-14
+#define HPC_SLOT_ON		0x03	// Y	0-14
+#define HPC_SLOT_ATTNOFF	0x04	// N	0-14
+#define HPC_SLOT_ATTNON		0x05	// N	0-14
+#define HPC_CTLR_CLEARIRQ	0x06	// N	15
+#define HPC_CTLR_RESET		0x07	// Y	15
+#define HPC_CTLR_IRQSTEER	0x08	// N	15
+#define HPC_BUS_33CONVMODE	0x09	// Y	31-34
+#define HPC_BUS_66CONVMODE	0x0A	// Y	31-34
+#define HPC_BUS_66PCIXMODE	0x0B	// Y	31-34
+#define HPC_BUS_100PCIXMODE	0x0C	// Y	31-34
+#define HPC_BUS_133PCIXMODE	0x0D	// Y	31-34
+#define HPC_ALLSLOT_OFF		0x11	// Y	15
+#define HPC_ALLSLOT_ON		0x12	// Y	15
+#define HPC_SLOT_BLINKLED	0x13	// N	0-14
+
+//----------------------------------------------------------------------------
+// read commands
+//----------------------------------------------------------------------------
+#define READ_SLOTSTATUS		0x01
+#define READ_EXTSLOTSTATUS	0x02
+#define READ_BUSSTATUS		0x03
+#define READ_CTLRSTATUS		0x04
+#define READ_ALLSTAT		0x05
+#define READ_ALLSLOT		0x06
+#define READ_SLOTLATCHLOWREG	0x07
+#define READ_REVLEVEL		0x08
+#define READ_HPCOPTIONS		0x09
+//----------------------------------------------------------------------------
+// slot status
+//----------------------------------------------------------------------------
+#define HPC_SLOT_POWER		0x01
+#define HPC_SLOT_CONNECT	0x02
+#define HPC_SLOT_ATTN		0x04
+#define HPC_SLOT_PRSNT2		0x08
+#define HPC_SLOT_PRSNT1		0x10
+#define HPC_SLOT_PWRGD		0x20
+#define HPC_SLOT_BUS_SPEED	0x40
+#define HPC_SLOT_LATCH		0x80
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_POWER status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_POWER_OFF	0x00
+#define HPC_SLOT_POWER_ON	0x01
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_CONNECT status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_CONNECTED	0x00
+#define HPC_SLOT_DISCONNECTED	0x01
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_ATTN status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_ATTN_OFF	0x00
+#define HPC_SLOT_ATTN_ON	0x01
+#define HPC_SLOT_ATTN_BLINK	0x02
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_PRSNT status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_EMPTY		0x00
+#define HPC_SLOT_PRSNT_7	0x01
+#define HPC_SLOT_PRSNT_15	0x02
+#define HPC_SLOT_PRSNT_25	0x03
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_PWRGD status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_PWRGD_FAULT_NONE	0x00
+#define HPC_SLOT_PWRGD_GOOD		0x01
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_BUS_SPEED status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_BUS_SPEED_OK	0x00
+#define HPC_SLOT_BUS_SPEED_MISM	0x01
+
+//----------------------------------------------------------------------------
+// HPC_SLOT_LATCH status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_LATCH_OPEN	0x01	// NOTE : in PCI spec bit off = open
+#define HPC_SLOT_LATCH_CLOSED	0x00	// NOTE : in PCI spec bit on  = closed
+
+
+//----------------------------------------------------------------------------
+// extended slot status
+//----------------------------------------------------------------------------
+#define HPC_SLOT_PCIX		0x01
+#define HPC_SLOT_SPEED1		0x02
+#define HPC_SLOT_SPEED2		0x04
+#define HPC_SLOT_BLINK_ATTN	0x08
+#define HPC_SLOT_RSRVD1		0x10
+#define HPC_SLOT_RSRVD2		0x20
+#define HPC_SLOT_BUS_MODE	0x40
+#define HPC_SLOT_RSRVD3		0x80
+
+//----------------------------------------------------------------------------
+// HPC_XSLOT_PCIX_CAP status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_PCIX_NO	0x00
+#define HPC_SLOT_PCIX_YES	0x01
+
+//----------------------------------------------------------------------------
+// HPC_XSLOT_SPEED status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_SPEED_33	0x00
+#define HPC_SLOT_SPEED_66	0x01
+#define HPC_SLOT_SPEED_133	0x02
+
+//----------------------------------------------------------------------------
+// HPC_XSLOT_ATTN_BLINK status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_ATTN_BLINK_OFF	0x00
+#define HPC_SLOT_ATTN_BLINK_ON	0x01
+
+//----------------------------------------------------------------------------
+// HPC_XSLOT_BUS_MODE status return codes
+//----------------------------------------------------------------------------
+#define HPC_SLOT_BUS_MODE_OK	0x00
+#define HPC_SLOT_BUS_MODE_MISM	0x01
+
+//----------------------------------------------------------------------------
+// Controller status
+//----------------------------------------------------------------------------
+#define HPC_CTLR_WORKING	0x01
+#define HPC_CTLR_FINISHED	0x02
+#define HPC_CTLR_RESULT0	0x04
+#define HPC_CTLR_RESULT1	0x08
+#define HPC_CTLR_RESULE2	0x10
+#define HPC_CTLR_RESULT3	0x20
+#define HPC_CTLR_IRQ_ROUTG	0x40
+#define HPC_CTLR_IRQ_PENDG	0x80
+
+//----------------------------------------------------------------------------
+// HPC_CTLR_WROKING status return codes
+//----------------------------------------------------------------------------
+#define HPC_CTLR_WORKING_NO	0x00
+#define HPC_CTLR_WORKING_YES	0x01
+
+//----------------------------------------------------------------------------
+// HPC_CTLR_FINISHED status return codes
+//----------------------------------------------------------------------------
+#define HPC_CTLR_FINISHED_NO	0x00
+#define HPC_CTLR_FINISHED_YES	0x01
+
+//----------------------------------------------------------------------------
+// HPC_CTLR_RESULT status return codes
+//----------------------------------------------------------------------------
+#define HPC_CTLR_RESULT_SUCCESS	0x00
+#define HPC_CTLR_RESULT_FAILED	0x01
+#define HPC_CTLR_RESULT_RSVD	0x02
+#define HPC_CTLR_RESULT_NORESP	0x03
+
+
+//----------------------------------------------------------------------------
+// macro for slot info
+//----------------------------------------------------------------------------
+#define SLOT_POWER(s)	((u8) ((s & HPC_SLOT_POWER) \
+	? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF))
+
+#define SLOT_CONNECT(s)	((u8) ((s & HPC_SLOT_CONNECT) \
+	? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED))
+
+#define SLOT_ATTN(s,es)	((u8) ((es & HPC_SLOT_BLINK_ATTN) \
+	? HPC_SLOT_ATTN_BLINK \
+	: ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF)))
+
+#define SLOT_PRESENT(s)	((u8) ((s & HPC_SLOT_PRSNT1) \
+	? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \
+	: ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7)))
+
+#define SLOT_PWRGD(s)	((u8) ((s & HPC_SLOT_PWRGD) \
+	? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE))
+
+#define SLOT_BUS_SPEED(s)	((u8) ((s & HPC_SLOT_BUS_SPEED) \
+	? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK))
+
+#define SLOT_LATCH(s)	((u8) ((s & HPC_SLOT_LATCH) \
+	? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN))
+
+#define SLOT_PCIX(es)	((u8) ((es & HPC_SLOT_PCIX) \
+	? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO))
+
+#define SLOT_SPEED(es)	((u8) ((es & HPC_SLOT_SPEED2) \
+	? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133   \
+				: HPC_SLOT_SPEED_66)   \
+	: HPC_SLOT_SPEED_33))
+
+#define SLOT_BUS_MODE(es)	((u8) ((es & HPC_SLOT_BUS_MODE) \
+	? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK))
+
+//--------------------------------------------------------------------------
+// macro for bus info
+//---------------------------------------------------------------------------
+#define CURRENT_BUS_SPEED(s)	((u8) (s & BUS_SPEED_2) \
+	? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \
+	: ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33))
+
+#define CURRENT_BUS_MODE(s)	((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI)
+
+#define READ_BUS_STATUS(s)	((u8) (s->options & BUS_STATUS_AVAILABLE))
+
+#define READ_BUS_MODE(s)	((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20)
+
+#define SET_BUS_STATUS(s)	((u8) (s->options & BUS_CONTROL_AVAILABLE))
+
+#define READ_SLOT_LATCH(s)	((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED))
+
+//----------------------------------------------------------------------------
+// macro for controller info
+//----------------------------------------------------------------------------
+#define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \
+	? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO))
+#define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \
+	? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO))
+#define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1)  \
+	? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \
+				: HPC_CTLR_RESULT_RSVD)  \
+	: ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \
+				: HPC_CTLR_RESULT_SUCCESS)))
+
+// command that affect the state machine of HPC
+#define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF)        || \
+				  (c == HPC_SLOT_ON)         || \
+				  (c == HPC_CTLR_RESET)      || \
+				  (c == HPC_BUS_33CONVMODE)  || \
+				  (c == HPC_BUS_66CONVMODE)  || \
+				  (c == HPC_BUS_66PCIXMODE)  || \
+				  (c == HPC_BUS_100PCIXMODE) || \
+				  (c == HPC_BUS_133PCIXMODE) || \
+				  (c == HPC_ALLSLOT_OFF)     || \
+				  (c == HPC_ALLSLOT_ON))
+
+
+/* Core part of the driver */
+
+#define ENABLE		1
+#define DISABLE		0
+
+#define CARD_INFO	0x07
+#define PCIX133		0x07
+#define PCIX66		0x05
+#define PCI66		0x04
+
+extern struct pci_bus *ibmphp_pci_bus;
+
+/* Variables */
+
+struct pci_func {
+	struct pci_dev *dev;	/* from the OS */
+	u8 busno;
+	u8 device;
+	u8 function;
+	struct resource_node *io[6];
+	struct resource_node *mem[6];
+	struct resource_node *pfmem[6];
+	struct pci_func *next;
+	int devices[32];	/* for bridge config */
+	u8 irq[4];		/* for interrupt config */
+	u8 bus;			/* flag for unconfiguring, to say if PPB */
+};
+
+struct slot {
+	u8 bus;
+	u8 device;
+	u8 number;
+	u8 real_physical_slot_num;
+	char name[100];
+	u32 capabilities;
+	u8 supported_speed;
+	u8 supported_bus_mode;
+	struct hotplug_slot *hotplug_slot;
+	struct controller *ctrl;
+	struct pci_func *func;
+	u8 irq[4];
+	u8 flag;		/* this is for disable slot and polling */
+	int bit_mode;		/* 0 = 32, 1 = 64 */
+	u8 ctlr_index;
+	struct bus_info *bus_on;
+	struct list_head ibm_slot_list;
+	u8 status;
+	u8 ext_status;
+	u8 busstatus;
+};
+
+struct controller {
+	struct ebda_hpc_slot *slots;
+	struct ebda_hpc_bus *buses;
+	struct pci_dev *ctrl_dev; /* in case where controller is PCI */
+	u8 starting_slot_num;	/* starting and ending slot #'s this ctrl controls*/
+	u8 ending_slot_num;
+	u8 revision;
+	u8 options;		/* which options HPC supports */
+	u8 status;
+	u8 ctlr_id;
+	u8 slot_count;
+	u8 bus_count;
+	u8 ctlr_relative_id;
+	u32 irq;
+	union {
+		struct isa_ctlr_access isa_ctlr;
+		struct pci_ctlr_access pci_ctlr;
+		struct wpeg_i2c_ctlr_access wpeg_ctlr;
+	} u;
+	u8 ctlr_type;
+	struct list_head ebda_hpc_list;
+};
+
+/* Functions */
+
+extern int ibmphp_init_devno (struct slot **);	/* This function is called from EBDA, so we need it not be static */
+extern int ibmphp_do_disable_slot (struct slot *slot_cur);
+extern int ibmphp_update_slot_info (struct slot *);	/* This function is called from HPC, so we need it to not be be static */
+extern int ibmphp_configure_card (struct pci_func *, u8);
+extern int ibmphp_unconfigure_card (struct slot **, int);
+extern struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
+
+#endif				//__IBMPHP_H
+