Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-i386/mach-default/apm.h b/include/asm-i386/mach-default/apm.h
new file mode 100644
index 0000000..1f730b8
--- /dev/null
+++ b/include/asm-i386/mach-default/apm.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-i386/mach-default/apm.h
+ *
+ * Machine specific APM BIOS functions for generic.
+ * Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_APM_H
+#define _ASM_APM_H
+
+#ifdef APM_ZERO_SEGS
+# define APM_DO_ZERO_SEGS \
+ "pushl %%ds\n\t" \
+ "pushl %%es\n\t" \
+ "xorl %%edx, %%edx\n\t" \
+ "mov %%dx, %%ds\n\t" \
+ "mov %%dx, %%es\n\t" \
+ "mov %%dx, %%fs\n\t" \
+ "mov %%dx, %%gs\n\t"
+# define APM_DO_POP_SEGS \
+ "popl %%es\n\t" \
+ "popl %%ds\n\t"
+#else
+# define APM_DO_ZERO_SEGS
+# define APM_DO_POP_SEGS
+#endif
+
+static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
+ u32 *eax, u32 *ebx, u32 *ecx,
+ u32 *edx, u32 *esi)
+{
+ /*
+ * N.B. We do NOT need a cld after the BIOS call
+ * because we always save and restore the flags.
+ */
+ __asm__ __volatile__(APM_DO_ZERO_SEGS
+ "pushl %%edi\n\t"
+ "pushl %%ebp\n\t"
+ "lcall *%%cs:apm_bios_entry\n\t"
+ "setc %%al\n\t"
+ "popl %%ebp\n\t"
+ "popl %%edi\n\t"
+ APM_DO_POP_SEGS
+ : "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
+ "=S" (*esi)
+ : "a" (func), "b" (ebx_in), "c" (ecx_in)
+ : "memory", "cc");
+}
+
+static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
+ u32 ecx_in, u32 *eax)
+{
+ int cx, dx, si;
+ u8 error;
+
+ /*
+ * N.B. We do NOT need a cld after the BIOS call
+ * because we always save and restore the flags.
+ */
+ __asm__ __volatile__(APM_DO_ZERO_SEGS
+ "pushl %%edi\n\t"
+ "pushl %%ebp\n\t"
+ "lcall *%%cs:apm_bios_entry\n\t"
+ "setc %%bl\n\t"
+ "popl %%ebp\n\t"
+ "popl %%edi\n\t"
+ APM_DO_POP_SEGS
+ : "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
+ "=S" (si)
+ : "a" (func), "b" (ebx_in), "c" (ecx_in)
+ : "memory", "cc");
+ return error;
+}
+
+#endif /* _ASM_APM_H */
diff --git a/include/asm-i386/mach-default/bios_ebda.h b/include/asm-i386/mach-default/bios_ebda.h
new file mode 100644
index 0000000..9cbd9a6
--- /dev/null
+++ b/include/asm-i386/mach-default/bios_ebda.h
@@ -0,0 +1,15 @@
+#ifndef _MACH_BIOS_EBDA_H
+#define _MACH_BIOS_EBDA_H
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+ unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
+ address <<= 4;
+ return address; /* 0 means none */
+}
+
+#endif /* _MACH_BIOS_EBDA_H */
diff --git a/include/asm-i386/mach-default/do_timer.h b/include/asm-i386/mach-default/do_timer.h
new file mode 100644
index 0000000..03dd13a
--- /dev/null
+++ b/include/asm-i386/mach-default/do_timer.h
@@ -0,0 +1,85 @@
+/* defines for inline arch setup functions */
+
+#include <asm/apic.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs: standard registers from interrupt
+ *
+ * Description:
+ * This hook is called immediately after the timer interrupt is ack'd.
+ * It's primary purpose is to allow architectures that don't possess
+ * individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ * timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+ do_timer(regs);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+ profile_tick(CPU_PROFILING, regs);
+#else
+ if (!using_apic_timer)
+ smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count: hardware timer interrupt count on overflow
+ *
+ * Description:
+ * This call is invoked when the jiffies count has not incremented but
+ * the hardware timer interrupt has. It means that a timer tick interrupt
+ * came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+ int i;
+
+ spin_lock(&i8259A_lock);
+ /*
+ * This is tricky when I/O APICs are used;
+ * see do_timer_interrupt().
+ */
+ i = inb(0x20);
+ spin_unlock(&i8259A_lock);
+
+ /* assumption about timer being IRQ0 */
+ if (i & 0x01) {
+ /*
+ * We cannot detect lost timer interrupts ...
+ * well, that's why we call them lost, don't we? :)
+ * [hmm, on the Pentium and Alpha we can ... sort of]
+ */
+ count -= LATCH;
+ } else {
+#ifdef BUGGY_NEPTUN_TIMER
+ /*
+ * for the Neptun bug we know that the 'latch'
+ * command doesn't latch the high and low value
+ * of the counter atomically. Thus we have to
+ * substract 256 from the counter
+ * ... funny, isnt it? :)
+ */
+
+ count -= 256;
+#else
+ printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+ }
+ return count;
+}
diff --git a/include/asm-i386/mach-default/entry_arch.h b/include/asm-i386/mach-default/entry_arch.h
new file mode 100644
index 0000000..bc86146
--- /dev/null
+++ b/include/asm-i386/mach-default/entry_arch.h
@@ -0,0 +1,34 @@
+/*
+ * This file is designed to contain the BUILD_INTERRUPT specifications for
+ * all of the extra named interrupt vectors used by the architecture.
+ * Usually this is the Inter Process Interrupts (IPIs)
+ */
+
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
+#endif
+
+#endif
diff --git a/include/asm-i386/mach-default/io_ports.h b/include/asm-i386/mach-default/io_ports.h
new file mode 100644
index 0000000..a96d9f6
--- /dev/null
+++ b/include/asm-i386/mach-default/io_ports.h
@@ -0,0 +1,30 @@
+/*
+ * arch/i386/mach-generic/io_ports.h
+ *
+ * Machine specific IO port address definition for generic.
+ * Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_IO_PORTS_H
+#define _MACH_IO_PORTS_H
+
+/* i8253A PIT registers */
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+#define PIT_CH2 0x42
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD 0x20
+#define PIC_MASTER_IMR 0x21
+#define PIC_MASTER_ISR PIC_MASTER_CMD
+#define PIC_MASTER_POLL PIC_MASTER_ISR
+#define PIC_MASTER_OCW3 PIC_MASTER_ISR
+#define PIC_SLAVE_CMD 0xa0
+#define PIC_SLAVE_IMR 0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR 2
+#define MASTER_ICW4_DEFAULT 0x01
+#define SLAVE_ICW4_DEFAULT 0x01
+#define PIC_ICW4_AEOI 2
+
+#endif /* !_MACH_IO_PORTS_H */
diff --git a/include/asm-i386/mach-default/irq_vectors.h b/include/asm-i386/mach-default/irq_vectors.h
new file mode 100644
index 0000000..881c63c
--- /dev/null
+++ b/include/asm-i386/mach-default/irq_vectors.h
@@ -0,0 +1,96 @@
+/*
+ * This file should contain #defines for all of the interrupt vector
+ * numbers used by this architecture.
+ *
+ * In addition, there are some standard defines:
+ *
+ * FIRST_EXTERNAL_VECTOR:
+ * The first free place for external interrupts
+ *
+ * SYSCALL_VECTOR:
+ * The IRQ vector a syscall makes the user to kernel transition
+ * under.
+ *
+ * TIMER_IRQ:
+ * The IRQ number the timer interrupt comes in at.
+ *
+ * NR_IRQS:
+ * The total number of interrupt vectors (including all the
+ * architecture specific interrupts) needed.
+ *
+ */
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR 0x20
+
+#define SYSCALL_VECTOR 0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ * some of the following vectors are 'rare', they are merged
+ * into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ * TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ * Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR 0xff
+#define ERROR_APIC_VECTOR 0xfe
+#define INVALIDATE_TLB_VECTOR 0xfd
+#define RESCHEDULE_VECTOR 0xfc
+#define CALL_FUNCTION_VECTOR 0xfb
+
+#define THERMAL_APIC_VECTOR 0xf0
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR 0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR 0x31
+#define FIRST_SYSTEM_VECTOR 0xef
+
+#define TIMER_IRQ 0
+
+/*
+ * 16 8259A IRQ's, 208 potential APIC interrupt sources.
+ * Right now the APIC is mostly only used for SMP.
+ * 256 vectors is an architectural limit. (we can have
+ * more than 256 devices theoretically, but they will
+ * have to use shared interrupts)
+ * Since vectors 0x00-0x1f are used/reserved for the CPU,
+ * the usable vector space is 0x20-0xff (224 vectors)
+ */
+
+/*
+ * The maximum number of vectors supported by i386 processors
+ * is limited to 256. For processors other than i386, NR_VECTORS
+ * should be changed accordingly.
+ */
+#define NR_VECTORS 256
+
+#include "irq_vectors_limits.h"
+
+#define FPU_IRQ 13
+
+#define FIRST_VM86_IRQ 3
+#define LAST_VM86_IRQ 15
+#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15)
+
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-i386/mach-default/irq_vectors_limits.h b/include/asm-i386/mach-default/irq_vectors_limits.h
new file mode 100644
index 0000000..b330026
--- /dev/null
+++ b/include/asm-i386/mach-default/irq_vectors_limits.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IRQ_VECTORS_LIMITS_H
+#define _ASM_IRQ_VECTORS_LIMITS_H
+
+#ifdef CONFIG_PCI_MSI
+#define NR_IRQS FIRST_SYSTEM_VECTOR
+#define NR_IRQ_VECTORS NR_IRQS
+#else
+#ifdef CONFIG_X86_IO_APIC
+#define NR_IRQS 224
+# if (224 >= 32 * NR_CPUS)
+# define NR_IRQ_VECTORS NR_IRQS
+# else
+# define NR_IRQ_VECTORS (32 * NR_CPUS)
+# endif
+#else
+#define NR_IRQS 16
+#define NR_IRQ_VECTORS NR_IRQS
+#endif
+#endif
+
+#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-i386/mach-default/mach_apic.h b/include/asm-i386/mach-default/mach_apic.h
new file mode 100644
index 0000000..627f1cd0
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_apic.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <mach_apicdef.h>
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE (APIC_DFR_FLAT)
+
+static inline cpumask_t target_cpus(void)
+{
+#ifdef CONFIG_SMP
+ return cpu_online_map;
+#else
+ return cpumask_of_cpu(0);
+#endif
+}
+#define TARGET_CPUS (target_cpus())
+
+#define NO_BALANCE_IRQ (0)
+#define esr_disable (0)
+
+#define NO_IOAPIC_CHECK (0)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 1 /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+ return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+ return physid_isset(bit, phys_cpu_present_map);
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116). So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+ unsigned long val;
+
+ apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+ val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+ val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+ apic_write_around(APIC_LDR, val);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+ return phys_map;
+}
+
+static inline void clustered_apic_check(void)
+{
+ printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
+ "Flat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+ return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+ return 0;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+ return 1 << cpu;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+ if (mps_cpu < get_physical_broadcast())
+ return mps_cpu;
+ else
+ return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+ return physid_mask_of_physid(phys_apicid);
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m,
+ struct mpc_config_translation *translation_record)
+{
+ printk("Processor #%d %ld:%ld APIC version %d\n",
+ m->mpc_apicid,
+ (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+ m->mpc_apicver);
+ return (m->mpc_apicid);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+ return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+static inline int apic_id_registered(void)
+{
+ return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+ return cpus_addr(cpumask)[0];
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+ return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-default/mach_apicdef.h b/include/asm-i386/mach-default/mach_apicdef.h
new file mode 100644
index 0000000..7bcb350
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define APIC_ID_MASK (0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x)
+{
+ return (((x)>>24)&0xF);
+}
+
+#define GET_APIC_ID(x) get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-default/mach_ipi.h b/include/asm-i386/mach-default/mach_ipi.h
new file mode 100644
index 0000000..6f2b17a
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_ipi.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_bitmask(cpumask_t mask, int vector);
+void __send_IPI_shortcut(unsigned int shortcut, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+ send_IPI_mask_bitmask(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+ /*
+ * if there are no other CPUs in the system then we get an APIC send
+ * error if we try to broadcast, thus avoid sending IPIs in this case.
+ */
+ if (!(num_online_cpus() > 1))
+ return;
+
+ __send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
+ return;
+}
+
+static inline void send_IPI_all(int vector)
+{
+ __send_IPI_shortcut(APIC_DEST_ALLINC, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-default/mach_mpparse.h b/include/asm-i386/mach-default/mach_mpparse.h
new file mode 100644
index 0000000..1d38324
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_mpparse.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_MACH_MPPARSE_H
+#define __ASM_MACH_MPPARSE_H
+
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+ struct mpc_config_translation *translation)
+{
+// Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
+}
+
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
+ struct mpc_config_translation *translation)
+{
+}
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+ return 0;
+}
+
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-i386/mach-default/mach_mpspec.h b/include/asm-i386/mach-default/mach_mpspec.h
new file mode 100644
index 0000000..6b5dadc
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_mpspec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#define MAX_MP_BUSSES 32
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-default/mach_reboot.h b/include/asm-i386/mach-default/mach_reboot.h
new file mode 100644
index 0000000..521e227
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_reboot.h
@@ -0,0 +1,30 @@
+/*
+ * arch/i386/mach-generic/mach_reboot.h
+ *
+ * Machine specific reboot functions for generic.
+ * Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_REBOOT_H
+#define _MACH_REBOOT_H
+
+static inline void kb_wait(void)
+{
+ int i;
+
+ for (i = 0; i < 0x10000; i++)
+ if ((inb_p(0x64) & 0x02) == 0)
+ break;
+}
+
+static inline void mach_reboot(void)
+{
+ int i;
+ for (i = 0; i < 100; i++) {
+ kb_wait();
+ udelay(50);
+ outb(0xfe, 0x64); /* pulse reset low */
+ udelay(50);
+ }
+}
+
+#endif /* !_MACH_REBOOT_H */
diff --git a/include/asm-i386/mach-default/mach_time.h b/include/asm-i386/mach-default/mach_time.h
new file mode 100644
index 0000000..b749aa4
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_time.h
@@ -0,0 +1,122 @@
+/*
+ * include/asm-i386/mach-default/mach_time.h
+ *
+ * Machine specific set RTC function for generic.
+ * Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/mc146818rtc.h>
+
+/* for check timing call set_rtc_mmss() 500ms */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+#define USEC_AFTER 500000
+#define USEC_BEFORE 500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ * sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+ int retval = 0;
+ int real_seconds, real_minutes, cmos_minutes;
+ unsigned char save_control, save_freq_select;
+
+ save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+ cmos_minutes = CMOS_READ(RTC_MINUTES);
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ BCD_TO_BIN(cmos_minutes);
+
+ /*
+ * since we're only adjusting minutes and seconds,
+ * don't interfere with hour overflow. This avoids
+ * messing with unknown time zones but requires your
+ * RTC not to be off by more than 15 minutes
+ */
+ real_seconds = nowtime % 60;
+ real_minutes = nowtime / 60;
+ if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+ real_minutes += 30; /* correct for half hour time zone */
+ real_minutes %= 60;
+
+ if (abs(real_minutes - cmos_minutes) < 30) {
+ if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ BIN_TO_BCD(real_seconds);
+ BIN_TO_BCD(real_minutes);
+ }
+ CMOS_WRITE(real_seconds,RTC_SECONDS);
+ CMOS_WRITE(real_minutes,RTC_MINUTES);
+ } else {
+ printk(KERN_WARNING
+ "set_rtc_mmss: can't update from %d to %d\n",
+ cmos_minutes, real_minutes);
+ retval = -1;
+ }
+
+ /* The following flags have to be released exactly in this order,
+ * otherwise the DS12887 (popular MC146818A clone with integrated
+ * battery and quartz) will not reset the oscillator and will not
+ * update precisely 500 ms later. You won't find this mentioned in
+ * the Dallas Semiconductor data sheets, but who believes data
+ * sheets anyway ... -- Markus Kuhn
+ */
+ CMOS_WRITE(save_control, RTC_CONTROL);
+ CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+ return retval;
+}
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ int i;
+
+ /* The Linux interpretation of the CMOS clock register contents:
+ * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+ * RTC registers show the second which has precisely just started.
+ * Let's hope other operating systems interpret the RTC the same way.
+ */
+ /* read RTC exactly on falling edge of update flag */
+ for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
+ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+ break;
+ for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */
+ if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+ break;
+ do { /* Isn't this overkill ? UIP above should guarantee consistency */
+ sec = CMOS_READ(RTC_SECONDS);
+ min = CMOS_READ(RTC_MINUTES);
+ hour = CMOS_READ(RTC_HOURS);
+ day = CMOS_READ(RTC_DAY_OF_MONTH);
+ mon = CMOS_READ(RTC_MONTH);
+ year = CMOS_READ(RTC_YEAR);
+ } while (sec != CMOS_READ(RTC_SECONDS));
+ if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+ {
+ BCD_TO_BIN(sec);
+ BCD_TO_BIN(min);
+ BCD_TO_BIN(hour);
+ BCD_TO_BIN(day);
+ BCD_TO_BIN(mon);
+ BCD_TO_BIN(year);
+ }
+ if ((year += 1900) < 1970)
+ year += 100;
+
+ return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* !_MACH_TIME_H */
diff --git a/include/asm-i386/mach-default/mach_timer.h b/include/asm-i386/mach-default/mach_timer.h
new file mode 100644
index 0000000..4b9703b
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_timer.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-i386/mach-default/mach_timer.h
+ *
+ * Machine specific calibrate_tsc() for generic.
+ * Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC -------
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _MACH_TIMER_H
+#define _MACH_TIMER_H
+
+#define CALIBRATE_LATCH (5 * LATCH)
+
+static inline void mach_prepare_counter(void)
+{
+ /* Set the Gate high, disable speaker */
+ outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+ /*
+ * Now let's take care of CTC channel 2
+ *
+ * Set the Gate high, program CTC channel 2 for mode 0,
+ * (interrupt on terminal count mode), binary count,
+ * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+ *
+ * Some devices need a delay here.
+ */
+ outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
+ outb_p(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */
+ outb_p(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */
+}
+
+static inline void mach_countup(unsigned long *count_p)
+{
+ unsigned long count = 0;
+ do {
+ count++;
+ } while ((inb_p(0x61) & 0x20) == 0);
+ *count_p = count;
+}
+
+#endif /* !_MACH_TIMER_H */
diff --git a/include/asm-i386/mach-default/mach_traps.h b/include/asm-i386/mach-default/mach_traps.h
new file mode 100644
index 0000000..625438b
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_traps.h
@@ -0,0 +1,41 @@
+/*
+ * include/asm-i386/mach-default/mach_traps.h
+ *
+ * Machine specific NMI handling for generic.
+ * Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+#include <asm/mc146818rtc.h>
+
+static inline void clear_mem_error(unsigned char reason)
+{
+ reason = (reason & 0xf) | 4;
+ outb(reason, 0x61);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+ return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+ int old_reg = -1;
+
+ if (do_i_have_lock_cmos())
+ old_reg = current_lock_cmos_reg();
+ else
+ lock_cmos(0); /* register doesn't matter here */
+ outb(0x8f, 0x70);
+ inb(0x71); /* dummy */
+ outb(0x0f, 0x70);
+ inb(0x71); /* dummy */
+ if (old_reg >= 0)
+ outb(old_reg, 0x70);
+ else
+ unlock_cmos();
+}
+
+#endif /* !_MACH_TRAPS_H */
diff --git a/include/asm-i386/mach-default/mach_wakecpu.h b/include/asm-i386/mach-default/mach_wakecpu.h
new file mode 100644
index 0000000..673b85c
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_wakecpu.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_MACH_WAKECPU_H
+#define __ASM_MACH_WAKECPU_H
+
+/*
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#define WAKE_SECONDARY_VIA_INIT
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+ while (!atomic_read(deassert));
+ return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-i386/mach-default/pci-functions.h b/include/asm-i386/mach-default/pci-functions.h
new file mode 100644
index 0000000..ed0bab4
--- /dev/null
+++ b/include/asm-i386/mach-default/pci-functions.h
@@ -0,0 +1,19 @@
+/*
+ * PCI BIOS function numbering for conventional PCI BIOS
+ * systems
+ */
+
+#define PCIBIOS_PCI_FUNCTION_ID 0xb1XX
+#define PCIBIOS_PCI_BIOS_PRESENT 0xb101
+#define PCIBIOS_FIND_PCI_DEVICE 0xb102
+#define PCIBIOS_FIND_PCI_CLASS_CODE 0xb103
+#define PCIBIOS_GENERATE_SPECIAL_CYCLE 0xb106
+#define PCIBIOS_READ_CONFIG_BYTE 0xb108
+#define PCIBIOS_READ_CONFIG_WORD 0xb109
+#define PCIBIOS_READ_CONFIG_DWORD 0xb10a
+#define PCIBIOS_WRITE_CONFIG_BYTE 0xb10b
+#define PCIBIOS_WRITE_CONFIG_WORD 0xb10c
+#define PCIBIOS_WRITE_CONFIG_DWORD 0xb10d
+#define PCIBIOS_GET_ROUTING_OPTIONS 0xb10e
+#define PCIBIOS_SET_PCI_HW_INT 0xb10f
+
diff --git a/include/asm-i386/mach-default/setup_arch_post.h b/include/asm-i386/mach-default/setup_arch_post.h
new file mode 100644
index 0000000..2fc4888
--- /dev/null
+++ b/include/asm-i386/mach-default/setup_arch_post.h
@@ -0,0 +1,40 @@
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ *
+ * Description:
+ * This is included late in kernel/setup.c so that it can make
+ * use of all of the static functions.
+ **/
+
+static char * __init machine_specific_memory_setup(void)
+{
+ char *who;
+
+
+ who = "BIOS-e820";
+
+ /*
+ * Try to copy the BIOS-supplied E820-map.
+ *
+ * Otherwise fake a memory map; one section from 0k->640k,
+ * the next section from 1mb->appropriate_mem_k
+ */
+ sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+ if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+ unsigned long mem_size;
+
+ /* compare results from other methods and take the greater */
+ if (ALT_MEM_K < EXT_MEM_K) {
+ mem_size = EXT_MEM_K;
+ who = "BIOS-88";
+ } else {
+ mem_size = ALT_MEM_K;
+ who = "BIOS-e801";
+ }
+
+ e820.nr_map = 0;
+ add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+ add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+ }
+ return who;
+}
diff --git a/include/asm-i386/mach-default/setup_arch_pre.h b/include/asm-i386/mach-default/setup_arch_pre.h
new file mode 100644
index 0000000..fb42099e
--- /dev/null
+++ b/include/asm-i386/mach-default/setup_arch_pre.h
@@ -0,0 +1,5 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for generic */
+
+#define ARCH_SETUP
diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-i386/mach-default/smpboot_hooks.h
new file mode 100644
index 0000000..7f45f63
--- /dev/null
+++ b/include/asm-i386/mach-default/smpboot_hooks.h
@@ -0,0 +1,44 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+ io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+ CMOS_WRITE(0xa, 0xf);
+ local_flush_tlb();
+ Dprintk("1.\n");
+ *((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
+ Dprintk("2.\n");
+ *((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
+ Dprintk("3.\n");
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+ /*
+ * Install writable page 0 entry to set BIOS data area.
+ */
+ local_flush_tlb();
+
+ /*
+ * Paranoid: Set warm reset code and vector here back
+ * to default values.
+ */
+ CMOS_WRITE(0, 0xf);
+
+ *((volatile long *) phys_to_virt(0x467)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+ /*
+ * Here we can be sure that there is an IO-APIC in the system. Let's
+ * go and set it up:
+ */
+ if (!skip_ioapic_setup && nr_ioapics)
+ setup_IO_APIC();
+}