Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/linux/atmsap.h b/include/linux/atmsap.h
new file mode 100644
index 0000000..799b104
--- /dev/null
+++ b/include/linux/atmsap.h
@@ -0,0 +1,162 @@
+/* atmsap.h - ATM Service Access Point addressing definitions */
+
+/* Written 1995-1999 by Werner Almesberger, EPFL LRC/ICA */
+
+
+#ifndef _LINUX_ATMSAP_H
+#define _LINUX_ATMSAP_H
+
+#include <linux/atmapi.h>
+
+/*
+ * BEGIN_xx and END_xx markers are used for automatic generation of
+ * documentation. Do not change them.
+ */
+
+
+/*
+ * Layer 2 protocol identifiers
+ */
+
+/* BEGIN_L2 */
+#define ATM_L2_NONE 0 /* L2 not specified */
+#define ATM_L2_ISO1745 0x01 /* Basic mode ISO 1745 */
+#define ATM_L2_Q291 0x02 /* ITU-T Q.291 (Rec. I.441) */
+#define ATM_L2_X25_LL 0x06 /* ITU-T X.25, link layer */
+#define ATM_L2_X25_ML 0x07 /* ITU-T X.25, multilink */
+#define ATM_L2_LAPB 0x08 /* Extended LAPB, half-duplex (Rec. T.71) */
+#define ATM_L2_HDLC_ARM 0x09 /* HDLC ARM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_NRM 0x0a /* HDLC NRM (ISO/IEC 4335) */
+#define ATM_L2_HDLC_ABM 0x0b /* HDLC ABM (ISO/IEC 4335) */
+#define ATM_L2_ISO8802 0x0c /* LAN LLC (ISO/IEC 8802/2) */
+#define ATM_L2_X75 0x0d /* ITU-T X.75, SLP */
+#define ATM_L2_Q922 0x0e /* ITU-T Q.922 */
+#define ATM_L2_USER 0x10 /* user-specified */
+#define ATM_L2_ISO7776 0x11 /* ISO 7776 DTE-DTE */
+/* END_L2 */
+
+
+/*
+ * Layer 3 protocol identifiers
+ */
+
+/* BEGIN_L3 */
+#define ATM_L3_NONE 0 /* L3 not specified */
+#define ATM_L3_X25 0x06 /* ITU-T X.25, packet layer */
+#define ATM_L3_ISO8208 0x07 /* ISO/IEC 8208 */
+#define ATM_L3_X223 0x08 /* ITU-T X.223 | ISO/IEC 8878 */
+#define ATM_L3_ISO8473 0x09 /* ITU-T X.233 | ISO/IEC 8473 */
+#define ATM_L3_T70 0x0a /* ITU-T T.70 minimum network layer */
+#define ATM_L3_TR9577 0x0b /* ISO/IEC TR 9577 */
+#define ATM_L3_H310 0x0c /* ITU-T Recommendation H.310 */
+#define ATM_L3_H321 0x0d /* ITU-T Recommendation H.321 */
+#define ATM_L3_USER 0x10 /* user-specified */
+/* END_L3 */
+
+
+/*
+ * High layer identifiers
+ */
+
+/* BEGIN_HL */
+#define ATM_HL_NONE 0 /* HL not specified */
+#define ATM_HL_ISO 0x01 /* ISO */
+#define ATM_HL_USER 0x02 /* user-specific */
+#define ATM_HL_HLP 0x03 /* high layer profile - UNI 3.0 only */
+#define ATM_HL_VENDOR 0x04 /* vendor-specific application identifier */
+/* END_HL */
+
+
+/*
+ * ITU-T coded mode of operation
+ */
+
+/* BEGIN_IMD */
+#define ATM_IMD_NONE 0 /* mode not specified */
+#define ATM_IMD_NORMAL 1 /* normal mode of operation */
+#define ATM_IMD_EXTENDED 2 /* extended mode of operation */
+/* END_IMD */
+
+/*
+ * H.310 code points
+ */
+
+#define ATM_TT_NONE 0 /* terminal type not specified */
+#define ATM_TT_RX 1 /* receive only */
+#define ATM_TT_TX 2 /* send only */
+#define ATM_TT_RXTX 3 /* receive and send */
+
+#define ATM_MC_NONE 0 /* no multiplexing */
+#define ATM_MC_TS 1 /* transport stream (TS) */
+#define ATM_MC_TS_FEC 2 /* transport stream with forward error corr. */
+#define ATM_MC_PS 3 /* program stream (PS) */
+#define ATM_MC_PS_FEC 4 /* program stream with forward error corr. */
+#define ATM_MC_H221 5 /* ITU-T Rec. H.221 */
+
+/*
+ * SAP structures
+ */
+
+#define ATM_MAX_HLI 8 /* maximum high-layer information length */
+
+
+struct atm_blli {
+ unsigned char l2_proto; /* layer 2 protocol */
+ union {
+ struct {
+ unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */
+ /* absent */
+ unsigned char window; /* window size (k), 1-127 (0 to omit) */
+ } itu; /* ITU-T encoding */
+ unsigned char user; /* user-specified l2 information */
+ } l2;
+ unsigned char l3_proto; /* layer 3 protocol */
+ union {
+ struct {
+ unsigned char mode; /* mode of operation (ATM_IMD_xxx), 0 if */
+ /* absent */
+ unsigned char def_size; /* default packet size (log2), 4-12 (0 to */
+ /* omit) */
+ unsigned char window;/* packet window size, 1-127 (0 to omit) */
+ } itu; /* ITU-T encoding */
+ unsigned char user; /* user specified l3 information */
+ struct { /* if l3_proto = ATM_L3_H310 */
+ unsigned char term_type; /* terminal type */
+ unsigned char fw_mpx_cap; /* forward multiplexing capability */
+ /* only if term_type != ATM_TT_NONE */
+ unsigned char bw_mpx_cap; /* backward multiplexing capability */
+ /* only if term_type != ATM_TT_NONE */
+ } h310;
+ struct { /* if l3_proto = ATM_L3_TR9577 */
+ unsigned char ipi; /* initial protocol id */
+ unsigned char snap[5];/* IEEE 802.1 SNAP identifier */
+ /* (only if ipi == NLPID_IEEE802_1_SNAP) */
+ } tr9577;
+ } l3;
+} __ATM_API_ALIGN;
+
+
+struct atm_bhli {
+ unsigned char hl_type; /* high layer information type */
+ unsigned char hl_length; /* length (only if hl_type == ATM_HL_USER || */
+ /* hl_type == ATM_HL_ISO) */
+ unsigned char hl_info[ATM_MAX_HLI];/* high layer information */
+};
+
+
+#define ATM_MAX_BLLI 3 /* maximum number of BLLI elements */
+
+
+struct atm_sap {
+ struct atm_bhli bhli; /* local SAP, high-layer information */
+ struct atm_blli blli[ATM_MAX_BLLI] __ATM_API_ALIGN;
+ /* local SAP, low-layer info */
+};
+
+
+static __inline__ int blli_in_use(struct atm_blli blli)
+{
+ return blli.l2_proto || blli.l3_proto;
+}
+
+#endif