Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/rxrpc/packet.h b/include/rxrpc/packet.h
new file mode 100644
index 0000000..1447f0a
--- /dev/null
+++ b/include/rxrpc/packet.h
@@ -0,0 +1,127 @@
+/* packet.h: Rx packet layout and definitions
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _LINUX_RXRPC_PACKET_H
+#define _LINUX_RXRPC_PACKET_H
+
+#include <rxrpc/types.h>
+
+#define RXRPC_IPUDP_SIZE 28
+extern size_t RXRPC_MAX_PACKET_SIZE;
+#define RXRPC_MAX_PACKET_DATA_SIZE (RXRPC_MAX_PACKET_SIZE - sizeof(struct rxrpc_header))
+#define RXRPC_LOCAL_PACKET_SIZE RXRPC_MAX_PACKET_SIZE
+#define RXRPC_REMOTE_PACKET_SIZE (576 - RXRPC_IPUDP_SIZE)
+
+/*****************************************************************************/
+/*
+ * on-the-wire Rx packet header
+ * - all multibyte fields should be in network byte order
+ */
+struct rxrpc_header
+{
+ __be32 epoch; /* client boot timestamp */
+
+ __be32 cid; /* connection and channel ID */
+#define RXRPC_MAXCALLS 4 /* max active calls per conn */
+#define RXRPC_CHANNELMASK (RXRPC_MAXCALLS-1) /* mask for channel ID */
+#define RXRPC_CIDMASK (~RXRPC_CHANNELMASK) /* mask for connection ID */
+#define RXRPC_CIDSHIFT 2 /* shift for connection ID */
+
+ __be32 callNumber; /* call ID (0 for connection-level packets) */
+#define RXRPC_PROCESS_MAXCALLS (1<<2) /* maximum number of active calls per conn (power of 2) */
+
+ __be32 seq; /* sequence number of pkt in call stream */
+ __be32 serial; /* serial number of pkt sent to network */
+
+ uint8_t type; /* packet type */
+#define RXRPC_PACKET_TYPE_DATA 1 /* data */
+#define RXRPC_PACKET_TYPE_ACK 2 /* ACK */
+#define RXRPC_PACKET_TYPE_BUSY 3 /* call reject */
+#define RXRPC_PACKET_TYPE_ABORT 4 /* call/connection abort */
+#define RXRPC_PACKET_TYPE_ACKALL 5 /* ACK all outstanding packets on call */
+#define RXRPC_PACKET_TYPE_CHALLENGE 6 /* connection security challenge (SRVR->CLNT) */
+#define RXRPC_PACKET_TYPE_RESPONSE 7 /* connection secutity response (CLNT->SRVR) */
+#define RXRPC_PACKET_TYPE_DEBUG 8 /* debug info request */
+#define RXRPC_N_PACKET_TYPES 9 /* number of packet types (incl type 0) */
+
+ uint8_t flags; /* packet flags */
+#define RXRPC_CLIENT_INITIATED 0x01 /* signifies a packet generated by a client */
+#define RXRPC_REQUEST_ACK 0x02 /* request an unconditional ACK of this packet */
+#define RXRPC_LAST_PACKET 0x04 /* the last packet from this side for this call */
+#define RXRPC_MORE_PACKETS 0x08 /* more packets to come */
+#define RXRPC_JUMBO_PACKET 0x20 /* [DATA] this is a jumbo packet */
+#define RXRPC_SLOW_START_OK 0x20 /* [ACK] slow start supported */
+
+ uint8_t userStatus; /* app-layer defined status */
+ uint8_t securityIndex; /* security protocol ID */
+ __be16 _rsvd; /* reserved (used by kerberos security as cksum) */
+ __be16 serviceId; /* service ID */
+
+} __attribute__((packed));
+
+#define __rxrpc_header_off(X) offsetof(struct rxrpc_header,X)
+
+extern const char *rxrpc_pkts[];
+
+/*****************************************************************************/
+/*
+ * jumbo packet secondary header
+ * - can be mapped to read header by:
+ * - new_serial = serial + 1
+ * - new_seq = seq + 1
+ * - new_flags = j_flags
+ * - new__rsvd = j__rsvd
+ * - duplicating all other fields
+ */
+struct rxrpc_jumbo_header
+{
+ uint8_t flags; /* packet flags (as per rxrpc_header) */
+ uint8_t pad;
+ __be16 _rsvd; /* reserved (used by kerberos security as cksum) */
+};
+
+#define RXRPC_JUMBO_DATALEN 1412 /* non-terminal jumbo packet data length */
+
+/*****************************************************************************/
+/*
+ * on-the-wire Rx ACK packet data payload
+ * - all multibyte fields should be in network byte order
+ */
+struct rxrpc_ackpacket
+{
+ __be16 bufferSpace; /* number of packet buffers available */
+ __be16 maxSkew; /* diff between serno being ACK'd and highest serial no
+ * received */
+ __be32 firstPacket; /* sequence no of first ACK'd packet in attached list */
+ __be32 previousPacket; /* sequence no of previous packet received */
+ __be32 serial; /* serial no of packet that prompted this ACK */
+
+ uint8_t reason; /* reason for ACK */
+#define RXRPC_ACK_REQUESTED 1 /* ACK was requested on packet */
+#define RXRPC_ACK_DUPLICATE 2 /* duplicate packet received */
+#define RXRPC_ACK_OUT_OF_SEQUENCE 3 /* out of sequence packet received */
+#define RXRPC_ACK_EXCEEDS_WINDOW 4 /* packet received beyond end of ACK window */
+#define RXRPC_ACK_NOSPACE 5 /* packet discarded due to lack of buffer space */
+#define RXRPC_ACK_PING 6 /* keep alive ACK */
+#define RXRPC_ACK_PING_RESPONSE 7 /* response to RXRPC_ACK_PING */
+#define RXRPC_ACK_DELAY 8 /* nothing happened since received packet */
+#define RXRPC_ACK_IDLE 9 /* ACK due to fully received ACK window */
+
+ uint8_t nAcks; /* number of ACKs */
+#define RXRPC_MAXACKS 255
+
+ uint8_t acks[0]; /* list of ACK/NAKs */
+#define RXRPC_ACK_TYPE_NACK 0
+#define RXRPC_ACK_TYPE_ACK 1
+
+} __attribute__((packed));
+
+#endif /* _LINUX_RXRPC_PACKET_H */