Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h
new file mode 100644
index 0000000..43b6786
--- /dev/null
+++ b/include/sound/emu10k1.h
@@ -0,0 +1,1544 @@
+#ifndef __SOUND_EMU10K1_H
+#define __SOUND_EMU10K1_H
+
+/*
+ * Copyright (c) by Jaroslav Kysela <perex@suse.cz>,
+ * Creative Labs, Inc.
+ * Definitions for EMU10K1 (SB Live!) chips
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifdef __KERNEL__
+
+#include <sound/pcm.h>
+#include <sound/rawmidi.h>
+#include <sound/hwdep.h>
+#include <sound/ac97_codec.h>
+#include <sound/util_mem.h>
+#include <sound/pcm-indirect.h>
+#include <sound/timer.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+
+#ifndef PCI_VENDOR_ID_CREATIVE
+#define PCI_VENDOR_ID_CREATIVE 0x1102
+#endif
+#ifndef PCI_DEVICE_ID_CREATIVE_EMU10K1
+#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002
+#endif
+
+/* ------------------- DEFINES -------------------- */
+
+#define EMUPAGESIZE 4096
+#define MAXREQVOICES 8
+#define MAXPAGES 8192
+#define RESERVED 0
+#define NUM_MIDI 16
+#define NUM_G 64 /* use all channels */
+#define NUM_FXSENDS 4
+#define NUM_EFX_PLAYBACK 16
+
+/* FIXME? - according to the OSS driver the EMU10K1 needs a 29 bit DMA mask */
+#define EMU10K1_DMA_MASK 0x7fffffffUL /* 31bit */
+#define AUDIGY_DMA_MASK 0xffffffffUL /* 32bit */
+
+#define TMEMSIZE 256*1024
+#define TMEMSIZEREG 4
+
+#define IP_TO_CP(ip) ((ip == 0) ? 0 : (((0x00001000uL | (ip & 0x00000FFFL)) << (((ip >> 12) & 0x000FL) + 4)) & 0xFFFF0000uL))
+
+// Audigy specify registers are prefixed with 'A_'
+
+/************************************************************************************************/
+/* PCI function 0 registers, address = <val> + PCIBASE0 */
+/************************************************************************************************/
+
+#define PTR 0x00 /* Indexed register set pointer register */
+ /* NOTE: The CHANNELNUM and ADDRESS words can */
+ /* be modified independently of each other. */
+#define PTR_CHANNELNUM_MASK 0x0000003f /* For each per-channel register, indicates the */
+ /* channel number of the register to be */
+ /* accessed. For non per-channel registers the */
+ /* value should be set to zero. */
+#define PTR_ADDRESS_MASK 0x07ff0000 /* Register index */
+#define A_PTR_ADDRESS_MASK 0x0fff0000
+
+#define DATA 0x04 /* Indexed register set data register */
+
+#define IPR 0x08 /* Global interrupt pending register */
+ /* Clear pending interrupts by writing a 1 to */
+ /* the relevant bits and zero to the other bits */
+
+#define IPR_GPIOMSG 0x20000000 /* GPIO message interrupt (RE'd, still not sure
+ which INTE bits enable it) */
+
+/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
+#define IPR_A_MIDITRANSBUFEMPTY2 0x10000000 /* MIDI UART transmit buffer empty */
+#define IPR_A_MIDIRECVBUFEMPTY2 0x08000000 /* MIDI UART receive buffer empty */
+
+#define IPR_SPDIFBUFFULL 0x04000000 /* SPDIF capture related, 10k2 only? (RE) */
+#define IPR_SPDIFBUFHALFFULL 0x02000000 /* SPDIF capture related? (RE) */
+
+#define IPR_SAMPLERATETRACKER 0x01000000 /* Sample rate tracker lock status change */
+#define IPR_FXDSP 0x00800000 /* Enable FX DSP interrupts */
+#define IPR_FORCEINT 0x00400000 /* Force Sound Blaster interrupt */
+#define IPR_PCIERROR 0x00200000 /* PCI bus error */
+#define IPR_VOLINCR 0x00100000 /* Volume increment button pressed */
+#define IPR_VOLDECR 0x00080000 /* Volume decrement button pressed */
+#define IPR_MUTE 0x00040000 /* Mute button pressed */
+#define IPR_MICBUFFULL 0x00020000 /* Microphone buffer full */
+#define IPR_MICBUFHALFFULL 0x00010000 /* Microphone buffer half full */
+#define IPR_ADCBUFFULL 0x00008000 /* ADC buffer full */
+#define IPR_ADCBUFHALFFULL 0x00004000 /* ADC buffer half full */
+#define IPR_EFXBUFFULL 0x00002000 /* Effects buffer full */
+#define IPR_EFXBUFHALFFULL 0x00001000 /* Effects buffer half full */
+#define IPR_GPSPDIFSTATUSCHANGE 0x00000800 /* GPSPDIF channel status change */
+#define IPR_CDROMSTATUSCHANGE 0x00000400 /* CD-ROM channel status change */
+#define IPR_INTERVALTIMER 0x00000200 /* Interval timer terminal count */
+#define IPR_MIDITRANSBUFEMPTY 0x00000100 /* MIDI UART transmit buffer empty */
+#define IPR_MIDIRECVBUFEMPTY 0x00000080 /* MIDI UART receive buffer empty */
+#define IPR_CHANNELLOOP 0x00000040 /* Channel (half) loop interrupt(s) pending */
+#define IPR_CHANNELNUMBERMASK 0x0000003f /* When IPR_CHANNELLOOP is set, indicates the */
+ /* highest set channel in CLIPL, CLIPH, HLIPL, */
+ /* or HLIPH. When IP is written with CL set, */
+ /* the bit in H/CLIPL or H/CLIPH corresponding */
+ /* to the CIN value written will be cleared. */
+
+#define INTE 0x0c /* Interrupt enable register */
+#define INTE_VIRTUALSB_MASK 0xc0000000 /* Virtual Soundblaster I/O port capture */
+#define INTE_VIRTUALSB_220 0x00000000 /* Capture at I/O base address 0x220-0x22f */
+#define INTE_VIRTUALSB_240 0x40000000 /* Capture at I/O base address 0x240 */
+#define INTE_VIRTUALSB_260 0x80000000 /* Capture at I/O base address 0x260 */
+#define INTE_VIRTUALSB_280 0xc0000000 /* Capture at I/O base address 0x280 */
+#define INTE_VIRTUALMPU_MASK 0x30000000 /* Virtual MPU I/O port capture */
+#define INTE_VIRTUALMPU_300 0x00000000 /* Capture at I/O base address 0x300-0x301 */
+#define INTE_VIRTUALMPU_310 0x10000000 /* Capture at I/O base address 0x310 */
+#define INTE_VIRTUALMPU_320 0x20000000 /* Capture at I/O base address 0x320 */
+#define INTE_VIRTUALMPU_330 0x30000000 /* Capture at I/O base address 0x330 */
+#define INTE_MASTERDMAENABLE 0x08000000 /* Master DMA emulation at 0x000-0x00f */
+#define INTE_SLAVEDMAENABLE 0x04000000 /* Slave DMA emulation at 0x0c0-0x0df */
+#define INTE_MASTERPICENABLE 0x02000000 /* Master PIC emulation at 0x020-0x021 */
+#define INTE_SLAVEPICENABLE 0x01000000 /* Slave PIC emulation at 0x0a0-0x0a1 */
+#define INTE_VSBENABLE 0x00800000 /* Enable virtual Soundblaster */
+#define INTE_ADLIBENABLE 0x00400000 /* Enable AdLib emulation at 0x388-0x38b */
+#define INTE_MPUENABLE 0x00200000 /* Enable virtual MPU */
+#define INTE_FORCEINT 0x00100000 /* Continuously assert INTAN */
+
+#define INTE_MRHANDENABLE 0x00080000 /* Enable the "Mr. Hand" logic */
+ /* NOTE: There is no reason to use this under */
+ /* Linux, and it will cause odd hardware */
+ /* behavior and possibly random segfaults and */
+ /* lockups if enabled. */
+
+/* The next two interrupts are for the midi port on the Audigy Drive (A_MPU1) */
+#define INTE_A_MIDITXENABLE2 0x00020000 /* Enable MIDI transmit-buffer-empty interrupts */
+#define INTE_A_MIDIRXENABLE2 0x00010000 /* Enable MIDI receive-buffer-empty interrupts */
+
+
+#define INTE_SAMPLERATETRACKER 0x00002000 /* Enable sample rate tracker interrupts */
+ /* NOTE: This bit must always be enabled */
+#define INTE_FXDSPENABLE 0x00001000 /* Enable FX DSP interrupts */
+#define INTE_PCIERRORENABLE 0x00000800 /* Enable PCI bus error interrupts */
+#define INTE_VOLINCRENABLE 0x00000400 /* Enable volume increment button interrupts */
+#define INTE_VOLDECRENABLE 0x00000200 /* Enable volume decrement button interrupts */
+#define INTE_MUTEENABLE 0x00000100 /* Enable mute button interrupts */
+#define INTE_MICBUFENABLE 0x00000080 /* Enable microphone buffer interrupts */
+#define INTE_ADCBUFENABLE 0x00000040 /* Enable ADC buffer interrupts */
+#define INTE_EFXBUFENABLE 0x00000020 /* Enable Effects buffer interrupts */
+#define INTE_GPSPDIFENABLE 0x00000010 /* Enable GPSPDIF status interrupts */
+#define INTE_CDSPDIFENABLE 0x00000008 /* Enable CDSPDIF status interrupts */
+#define INTE_INTERVALTIMERENB 0x00000004 /* Enable interval timer interrupts */
+#define INTE_MIDITXENABLE 0x00000002 /* Enable MIDI transmit-buffer-empty interrupts */
+#define INTE_MIDIRXENABLE 0x00000001 /* Enable MIDI receive-buffer-empty interrupts */
+
+#define WC 0x10 /* Wall Clock register */
+#define WC_SAMPLECOUNTER_MASK 0x03FFFFC0 /* Sample periods elapsed since reset */
+#define WC_SAMPLECOUNTER 0x14060010
+#define WC_CURRENTCHANNEL 0x0000003F /* Channel [0..63] currently being serviced */
+ /* NOTE: Each channel takes 1/64th of a sample */
+ /* period to be serviced. */
+
+#define HCFG 0x14 /* Hardware config register */
+ /* NOTE: There is no reason to use the legacy */
+ /* SoundBlaster emulation stuff described below */
+ /* under Linux, and all kinds of weird hardware */
+ /* behavior can result if you try. Don't. */
+#define HCFG_LEGACYFUNC_MASK 0xe0000000 /* Legacy function number */
+#define HCFG_LEGACYFUNC_MPU 0x00000000 /* Legacy MPU */
+#define HCFG_LEGACYFUNC_SB 0x40000000 /* Legacy SB */
+#define HCFG_LEGACYFUNC_AD 0x60000000 /* Legacy AD */
+#define HCFG_LEGACYFUNC_MPIC 0x80000000 /* Legacy MPIC */
+#define HCFG_LEGACYFUNC_MDMA 0xa0000000 /* Legacy MDMA */
+#define HCFG_LEGACYFUNC_SPCI 0xc0000000 /* Legacy SPCI */
+#define HCFG_LEGACYFUNC_SDMA 0xe0000000 /* Legacy SDMA */
+#define HCFG_IOCAPTUREADDR 0x1f000000 /* The 4 LSBs of the captured I/O address. */
+#define HCFG_LEGACYWRITE 0x00800000 /* 1 = write, 0 = read */
+#define HCFG_LEGACYWORD 0x00400000 /* 1 = word, 0 = byte */
+#define HCFG_LEGACYINT 0x00200000 /* 1 = legacy event captured. Write 1 to clear. */
+ /* NOTE: The rest of the bits in this register */
+ /* _are_ relevant under Linux. */
+#define HCFG_CODECFORMAT_MASK 0x00070000 /* CODEC format */
+#define HCFG_CODECFORMAT_AC97 0x00000000 /* AC97 CODEC format -- Primary Output */
+#define HCFG_CODECFORMAT_I2S 0x00010000 /* I2S CODEC format -- Secondary (Rear) Output */
+#define HCFG_GPINPUT0 0x00004000 /* External pin112 */
+#define HCFG_GPINPUT1 0x00002000 /* External pin110 */
+#define HCFG_GPOUTPUT_MASK 0x00001c00 /* External pins which may be controlled */
+#define HCFG_GPOUT0 0x00001000 /* External pin? (spdif enable on 5.1) */
+#define HCFG_GPOUT1 0x00000800 /* External pin? (IR) */
+#define HCFG_GPOUT2 0x00000400 /* External pin? (IR) */
+#define HCFG_JOYENABLE 0x00000200 /* Internal joystick enable */
+#define HCFG_PHASETRACKENABLE 0x00000100 /* Phase tracking enable */
+ /* 1 = Force all 3 async digital inputs to use */
+ /* the same async sample rate tracker (ZVIDEO) */
+#define HCFG_AC3ENABLE_MASK 0x000000e0 /* AC3 async input control - Not implemented */
+#define HCFG_AC3ENABLE_ZVIDEO 0x00000080 /* Channels 0 and 1 replace ZVIDEO */
+#define HCFG_AC3ENABLE_CDSPDIF 0x00000040 /* Channels 0 and 1 replace CDSPDIF */
+#define HCFG_AC3ENABLE_GPSPDIF 0x00000020 /* Channels 0 and 1 replace GPSPDIF */
+#define HCFG_AUTOMUTE 0x00000010 /* When set, the async sample rate convertors */
+ /* will automatically mute their output when */
+ /* they are not rate-locked to the external */
+ /* async audio source */
+#define HCFG_LOCKSOUNDCACHE 0x00000008 /* 1 = Cancel bustmaster accesses to soundcache */
+ /* NOTE: This should generally never be used. */
+#define HCFG_LOCKTANKCACHE_MASK 0x00000004 /* 1 = Cancel bustmaster accesses to tankcache */
+ /* NOTE: This should generally never be used. */
+#define HCFG_LOCKTANKCACHE 0x01020014
+#define HCFG_MUTEBUTTONENABLE 0x00000002 /* 1 = Master mute button sets AUDIOENABLE = 0. */
+ /* NOTE: This is a 'cheap' way to implement a */
+ /* master mute function on the mute button, and */
+ /* in general should not be used unless a more */
+ /* sophisticated master mute function has not */
+ /* been written. */
+#define HCFG_AUDIOENABLE 0x00000001 /* 0 = CODECs transmit zero-valued samples */
+ /* Should be set to 1 when the EMU10K1 is */
+ /* completely initialized. */
+
+//For Audigy, MPU port move to 0x70-0x74 ptr register
+
+#define MUDATA 0x18 /* MPU401 data register (8 bits) */
+
+#define MUCMD 0x19 /* MPU401 command register (8 bits) */
+#define MUCMD_RESET 0xff /* RESET command */
+#define MUCMD_ENTERUARTMODE 0x3f /* Enter_UART_mode command */
+ /* NOTE: All other commands are ignored */
+
+#define MUSTAT MUCMD /* MPU401 status register (8 bits) */
+#define MUSTAT_IRDYN 0x80 /* 0 = MIDI data or command ACK */
+#define MUSTAT_ORDYN 0x40 /* 0 = MUDATA can accept a command or data */
+
+#define A_IOCFG 0x18 /* GPIO on Audigy card (16bits) */
+#define A_GPINPUT_MASK 0xff00
+#define A_GPOUTPUT_MASK 0x00ff
+
+// Audigy output/GPIO stuff taken from the kX drivers
+#define A_IOCFG_GPOUT0 0x0044 /* analog/digital */
+#define A_IOCFG_DISABLE_ANALOG 0x0040 /* = 'enable' for Audigy2 (chiprev=4) */
+#define A_IOCFG_ENABLE_DIGITAL 0x0004
+#define A_IOCFG_UNKNOWN_20 0x0020
+#define A_IOCFG_DISABLE_AC97_FRONT 0x0080 /* turn off ac97 front -> front (10k2.1) */
+#define A_IOCFG_GPOUT1 0x0002 /* IR? drive's internal bypass (?) */
+#define A_IOCFG_GPOUT2 0x0001 /* IR */
+#define A_IOCFG_MULTIPURPOSE_JACK 0x2000 /* center+lfe+rear_center (a2/a2ex) */
+ /* + digital for generic 10k2 */
+#define A_IOCFG_DIGITAL_JACK 0x1000 /* digital for a2 platinum */
+#define A_IOCFG_FRONT_JACK 0x4000
+#define A_IOCFG_REAR_JACK 0x8000
+#define A_IOCFG_PHONES_JACK 0x0100 /* LiveDrive */
+
+/* outputs:
+ * for audigy2 platinum: 0xa00
+ * for a2 platinum ex: 0x1c00
+ * for a1 platinum: 0x0
+ */
+
+#define TIMER 0x1a /* Timer terminal count register */
+ /* NOTE: After the rate is changed, a maximum */
+ /* of 1024 sample periods should be allowed */
+ /* before the new rate is guaranteed accurate. */
+#define TIMER_RATE_MASK 0x000003ff /* Timer interrupt rate in sample periods */
+ /* 0 == 1024 periods, [1..4] are not useful */
+#define TIMER_RATE 0x0a00001a
+
+#define AC97DATA 0x1c /* AC97 register set data register (16 bit) */
+
+#define AC97ADDRESS 0x1e /* AC97 register set address register (8 bit) */
+#define AC97ADDRESS_READY 0x80 /* Read-only bit, reflects CODEC READY signal */
+#define AC97ADDRESS_ADDRESS 0x7f /* Address of indexed AC97 register */
+
+/* Available on the Audigy 2 and Audigy 4 only. This is the P16V chip. */
+#define PTR2 0x20 /* Indexed register set pointer register */
+#define DATA2 0x24 /* Indexed register set data register */
+#define IPR2 0x28 /* P16V interrupt pending register */
+#define IPR2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
+#define IPR2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
+#define IPR2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
+#define IPR2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Capture Channel 0 half loop */
+ /* 0x00000100 Playback. Only in once per period.
+ * 0x00110000 Capture. Int on half buffer.
+ */
+#define INTE2 0x2c /* P16V Interrupt enable register. */
+#define INTE2_PLAYBACK_CH_0_LOOP 0x00001000 /* Playback Channel 0 loop */
+#define INTE2_PLAYBACK_CH_0_HALF_LOOP 0x00000100 /* Playback Channel 0 half loop */
+#define INTE2_PLAYBACK_CH_1_LOOP 0x00002000 /* Playback Channel 1 loop */
+#define INTE2_PLAYBACK_CH_1_HALF_LOOP 0x00000200 /* Playback Channel 1 half loop */
+#define INTE2_PLAYBACK_CH_2_LOOP 0x00004000 /* Playback Channel 2 loop */
+#define INTE2_PLAYBACK_CH_2_HALF_LOOP 0x00000400 /* Playback Channel 2 half loop */
+#define INTE2_PLAYBACK_CH_3_LOOP 0x00008000 /* Playback Channel 3 loop */
+#define INTE2_PLAYBACK_CH_3_HALF_LOOP 0x00000800 /* Playback Channel 3 half loop */
+#define INTE2_CAPTURE_CH_0_LOOP 0x00100000 /* Capture Channel 0 loop */
+#define INTE2_CAPTURE_CH_0_HALF_LOOP 0x00010000 /* Caputre Channel 0 half loop */
+#define HCFG2 0x34 /* Defaults: 0, win2000 sets it to 00004201 */
+ /* 0x00000000 2-channel output. */
+ /* 0x00000200 8-channel output. */
+ /* 0x00000004 pauses stream/irq fail. */
+ /* Rest of bits no nothing to sound output */
+ /* bit 0: Enable P16V audio.
+ * bit 1: Lock P16V record memory cache.
+ * bit 2: Lock P16V playback memory cache.
+ * bit 3: Dummy record insert zero samples.
+ * bit 8: Record 8-channel in phase.
+ * bit 9: Playback 8-channel in phase.
+ * bit 11-12: Playback mixer attenuation: 0=0dB, 1=-6dB, 2=-12dB, 3=Mute.
+ * bit 13: Playback mixer enable.
+ * bit 14: Route SRC48 mixer output to fx engine.
+ * bit 15: Enable IEEE 1394 chip.
+ */
+#define IPR3 0x38 /* Cdif interrupt pending register */
+#define INTE3 0x3c /* Cdif interrupt enable register. */
+/************************************************************************************************/
+/* PCI function 1 registers, address = <val> + PCIBASE1 */
+/************************************************************************************************/
+
+#define JOYSTICK1 0x00 /* Analog joystick port register */
+#define JOYSTICK2 0x01 /* Analog joystick port register */
+#define JOYSTICK3 0x02 /* Analog joystick port register */
+#define JOYSTICK4 0x03 /* Analog joystick port register */
+#define JOYSTICK5 0x04 /* Analog joystick port register */
+#define JOYSTICK6 0x05 /* Analog joystick port register */
+#define JOYSTICK7 0x06 /* Analog joystick port register */
+#define JOYSTICK8 0x07 /* Analog joystick port register */
+
+/* When writing, any write causes JOYSTICK_COMPARATOR output enable to be pulsed on write. */
+/* When reading, use these bitfields: */
+#define JOYSTICK_BUTTONS 0x0f /* Joystick button data */
+#define JOYSTICK_COMPARATOR 0xf0 /* Joystick comparator data */
+
+
+/********************************************************************************************************/
+/* Emu10k1 pointer-offset register set, accessed through the PTR and DATA registers */
+/********************************************************************************************************/
+
+#define CPF 0x00 /* Current pitch and fraction register */
+#define CPF_CURRENTPITCH_MASK 0xffff0000 /* Current pitch (linear, 0x4000 == unity pitch shift) */
+#define CPF_CURRENTPITCH 0x10100000
+#define CPF_STEREO_MASK 0x00008000 /* 1 = Even channel interleave, odd channel locked */
+#define CPF_STOP_MASK 0x00004000 /* 1 = Current pitch forced to 0 */
+#define CPF_FRACADDRESS_MASK 0x00003fff /* Linear fractional address of the current channel */
+
+#define PTRX 0x01 /* Pitch target and send A/B amounts register */
+#define PTRX_PITCHTARGET_MASK 0xffff0000 /* Pitch target of specified channel */
+#define PTRX_PITCHTARGET 0x10100001
+#define PTRX_FXSENDAMOUNT_A_MASK 0x0000ff00 /* Linear level of channel output sent to FX send bus A */
+#define PTRX_FXSENDAMOUNT_A 0x08080001
+#define PTRX_FXSENDAMOUNT_B_MASK 0x000000ff /* Linear level of channel output sent to FX send bus B */
+#define PTRX_FXSENDAMOUNT_B 0x08000001
+
+#define CVCF 0x02 /* Current volume and filter cutoff register */
+#define CVCF_CURRENTVOL_MASK 0xffff0000 /* Current linear volume of specified channel */
+#define CVCF_CURRENTVOL 0x10100002
+#define CVCF_CURRENTFILTER_MASK 0x0000ffff /* Current filter cutoff frequency of specified channel */
+#define CVCF_CURRENTFILTER 0x10000002
+
+#define VTFT 0x03 /* Volume target and filter cutoff target register */
+#define VTFT_VOLUMETARGET_MASK 0xffff0000 /* Volume target of specified channel */
+#define VTFT_VOLUMETARGET 0x10100003
+#define VTFT_FILTERTARGET_MASK 0x0000ffff /* Filter cutoff target of specified channel */
+#define VTFT_FILTERTARGET 0x10000003
+
+#define Z1 0x05 /* Filter delay memory 1 register */
+
+#define Z2 0x04 /* Filter delay memory 2 register */
+
+#define PSST 0x06 /* Send C amount and loop start address register */
+#define PSST_FXSENDAMOUNT_C_MASK 0xff000000 /* Linear level of channel output sent to FX send bus C */
+
+#define PSST_FXSENDAMOUNT_C 0x08180006
+
+#define PSST_LOOPSTARTADDR_MASK 0x00ffffff /* Loop start address of the specified channel */
+#define PSST_LOOPSTARTADDR 0x18000006
+
+#define DSL 0x07 /* Send D amount and loop start address register */
+#define DSL_FXSENDAMOUNT_D_MASK 0xff000000 /* Linear level of channel output sent to FX send bus D */
+
+#define DSL_FXSENDAMOUNT_D 0x08180007
+
+#define DSL_LOOPENDADDR_MASK 0x00ffffff /* Loop end address of the specified channel */
+#define DSL_LOOPENDADDR 0x18000007
+
+#define CCCA 0x08 /* Filter Q, interp. ROM, byte size, cur. addr register */
+#define CCCA_RESONANCE 0xf0000000 /* Lowpass filter resonance (Q) height */
+#define CCCA_INTERPROMMASK 0x0e000000 /* Selects passband of interpolation ROM */
+ /* 1 == full band, 7 == lowpass */
+ /* ROM 0 is used when pitch shifting downward or less */
+ /* then 3 semitones upward. Increasingly higher ROM */
+ /* numbers are used, typically in steps of 3 semitones, */
+ /* as upward pitch shifting is performed. */
+#define CCCA_INTERPROM_0 0x00000000 /* Select interpolation ROM 0 */
+#define CCCA_INTERPROM_1 0x02000000 /* Select interpolation ROM 1 */
+#define CCCA_INTERPROM_2 0x04000000 /* Select interpolation ROM 2 */
+#define CCCA_INTERPROM_3 0x06000000 /* Select interpolation ROM 3 */
+#define CCCA_INTERPROM_4 0x08000000 /* Select interpolation ROM 4 */
+#define CCCA_INTERPROM_5 0x0a000000 /* Select interpolation ROM 5 */
+#define CCCA_INTERPROM_6 0x0c000000 /* Select interpolation ROM 6 */
+#define CCCA_INTERPROM_7 0x0e000000 /* Select interpolation ROM 7 */
+#define CCCA_8BITSELECT 0x01000000 /* 1 = Sound memory for this channel uses 8-bit samples */
+#define CCCA_CURRADDR_MASK 0x00ffffff /* Current address of the selected channel */
+#define CCCA_CURRADDR 0x18000008
+
+#define CCR 0x09 /* Cache control register */
+#define CCR_CACHEINVALIDSIZE 0x07190009
+#define CCR_CACHEINVALIDSIZE_MASK 0xfe000000 /* Number of invalid samples cache for this channel */
+#define CCR_CACHELOOPFLAG 0x01000000 /* 1 = Cache has a loop service pending */
+#define CCR_INTERLEAVEDSAMPLES 0x00800000 /* 1 = A cache service will fetch interleaved samples */
+#define CCR_WORDSIZEDSAMPLES 0x00400000 /* 1 = A cache service will fetch word sized samples */
+#define CCR_READADDRESS 0x06100009
+#define CCR_READADDRESS_MASK 0x003f0000 /* Location of cache just beyond current cache service */
+#define CCR_LOOPINVALSIZE 0x0000fe00 /* Number of invalid samples in cache prior to loop */
+ /* NOTE: This is valid only if CACHELOOPFLAG is set */
+#define CCR_LOOPFLAG 0x00000100 /* Set for a single sample period when a loop occurs */
+#define CCR_CACHELOOPADDRHI 0x000000ff /* DSL_LOOPSTARTADDR's hi byte if CACHELOOPFLAG is set */
+
+#define CLP 0x0a /* Cache loop register (valid if CCR_CACHELOOPFLAG = 1) */
+ /* NOTE: This register is normally not used */
+#define CLP_CACHELOOPADDR 0x0000ffff /* Cache loop address (DSL_LOOPSTARTADDR [0..15]) */
+
+#define FXRT 0x0b /* Effects send routing register */
+ /* NOTE: It is illegal to assign the same routing to */
+ /* two effects sends. */
+#define FXRT_CHANNELA 0x000f0000 /* Effects send bus number for channel's effects send A */
+#define FXRT_CHANNELB 0x00f00000 /* Effects send bus number for channel's effects send B */
+#define FXRT_CHANNELC 0x0f000000 /* Effects send bus number for channel's effects send C */
+#define FXRT_CHANNELD 0xf0000000 /* Effects send bus number for channel's effects send D */
+
+#define MAPA 0x0c /* Cache map A */
+
+#define MAPB 0x0d /* Cache map B */
+
+#define MAP_PTE_MASK 0xffffe000 /* The 19 MSBs of the PTE indexed by the PTI */
+#define MAP_PTI_MASK 0x00001fff /* The 13 bit index to one of the 8192 PTE dwords */
+
+#define ENVVOL 0x10 /* Volume envelope register */
+#define ENVVOL_MASK 0x0000ffff /* Current value of volume envelope state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define ATKHLDV 0x11 /* Volume envelope hold and attack register */
+#define ATKHLDV_PHASE0 0x00008000 /* 0 = Begin attack phase */
+#define ATKHLDV_HOLDTIME_MASK 0x00007f00 /* Envelope hold time (127-n == n*88.2msec) */
+#define ATKHLDV_ATTACKTIME_MASK 0x0000007f /* Envelope attack time, log encoded */
+ /* 0 = infinite, 1 = 10.9msec, ... 0x7f = 5.5msec */
+
+#define DCYSUSV 0x12 /* Volume envelope sustain and decay register */
+#define DCYSUSV_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
+#define DCYSUSV_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
+#define DCYSUSV_CHANNELENABLE_MASK 0x00000080 /* 1 = Inhibit envelope engine from writing values in */
+ /* this channel and from writing to pitch, filter and */
+ /* volume targets. */
+#define DCYSUSV_DECAYTIME_MASK 0x0000007f /* Volume envelope decay time, log encoded */
+ /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
+
+#define LFOVAL1 0x13 /* Modulation LFO value */
+#define LFOVAL_MASK 0x0000ffff /* Current value of modulation LFO state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define ENVVAL 0x14 /* Modulation envelope register */
+#define ENVVAL_MASK 0x0000ffff /* Current value of modulation envelope state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define ATKHLDM 0x15 /* Modulation envelope hold and attack register */
+#define ATKHLDM_PHASE0 0x00008000 /* 0 = Begin attack phase */
+#define ATKHLDM_HOLDTIME 0x00007f00 /* Envelope hold time (127-n == n*42msec) */
+#define ATKHLDM_ATTACKTIME 0x0000007f /* Envelope attack time, log encoded */
+ /* 0 = infinite, 1 = 11msec, ... 0x7f = 5.5msec */
+
+#define DCYSUSM 0x16 /* Modulation envelope decay and sustain register */
+#define DCYSUSM_PHASE1_MASK 0x00008000 /* 0 = Begin attack phase, 1 = begin release phase */
+#define DCYSUSM_SUSTAINLEVEL_MASK 0x00007f00 /* 127 = full, 0 = off, 0.75dB increments */
+#define DCYSUSM_DECAYTIME_MASK 0x0000007f /* Envelope decay time, log encoded */
+ /* 0 = 43.7msec, 1 = 21.8msec, 0x7f = 22msec */
+
+#define LFOVAL2 0x17 /* Vibrato LFO register */
+#define LFOVAL2_MASK 0x0000ffff /* Current value of vibrato LFO state variable */
+ /* 0x8000-n == 666*n usec delay */
+
+#define IP 0x18 /* Initial pitch register */
+#define IP_MASK 0x0000ffff /* Exponential initial pitch shift */
+ /* 4 bits of octave, 12 bits of fractional octave */
+#define IP_UNITY 0x0000e000 /* Unity pitch shift */
+
+#define IFATN 0x19 /* Initial filter cutoff and attenuation register */
+#define IFATN_FILTERCUTOFF_MASK 0x0000ff00 /* Initial filter cutoff frequency in exponential units */
+ /* 6 most significant bits are semitones */
+ /* 2 least significant bits are fractions */
+#define IFATN_FILTERCUTOFF 0x08080019
+#define IFATN_ATTENUATION_MASK 0x000000ff /* Initial attenuation in 0.375dB steps */
+#define IFATN_ATTENUATION 0x08000019
+
+
+#define PEFE 0x1a /* Pitch envelope and filter envelope amount register */
+#define PEFE_PITCHAMOUNT_MASK 0x0000ff00 /* Pitch envlope amount */
+ /* Signed 2's complement, +/- one octave peak extremes */
+#define PEFE_PITCHAMOUNT 0x0808001a
+#define PEFE_FILTERAMOUNT_MASK 0x000000ff /* Filter envlope amount */
+ /* Signed 2's complement, +/- six octaves peak extremes */
+#define PEFE_FILTERAMOUNT 0x0800001a
+#define FMMOD 0x1b /* Vibrato/filter modulation from LFO register */
+#define FMMOD_MODVIBRATO 0x0000ff00 /* Vibrato LFO modulation depth */
+ /* Signed 2's complement, +/- one octave extremes */
+#define FMMOD_MOFILTER 0x000000ff /* Filter LFO modulation depth */
+ /* Signed 2's complement, +/- three octave extremes */
+
+
+#define TREMFRQ 0x1c /* Tremolo amount and modulation LFO frequency register */
+#define TREMFRQ_DEPTH 0x0000ff00 /* Tremolo depth */
+ /* Signed 2's complement, with +/- 12dB extremes */
+
+#define TREMFRQ_FREQUENCY 0x000000ff /* Tremolo LFO frequency */
+ /* ??Hz steps, maximum of ?? Hz. */
+#define FM2FRQ2 0x1d /* Vibrato amount and vibrato LFO frequency register */
+#define FM2FRQ2_DEPTH 0x0000ff00 /* Vibrato LFO vibrato depth */
+ /* Signed 2's complement, +/- one octave extremes */
+#define FM2FRQ2_FREQUENCY 0x000000ff /* Vibrato LFO frequency */
+ /* 0.039Hz steps, maximum of 9.85 Hz. */
+
+#define TEMPENV 0x1e /* Tempory envelope register */
+#define TEMPENV_MASK 0x0000ffff /* 16-bit value */
+ /* NOTE: All channels contain internal variables; do */
+ /* not write to these locations. */
+
+/* 1f something */
+
+#define CD0 0x20 /* Cache data 0 register */
+#define CD1 0x21 /* Cache data 1 register */
+#define CD2 0x22 /* Cache data 2 register */
+#define CD3 0x23 /* Cache data 3 register */
+#define CD4 0x24 /* Cache data 4 register */
+#define CD5 0x25 /* Cache data 5 register */
+#define CD6 0x26 /* Cache data 6 register */
+#define CD7 0x27 /* Cache data 7 register */
+#define CD8 0x28 /* Cache data 8 register */
+#define CD9 0x29 /* Cache data 9 register */
+#define CDA 0x2a /* Cache data A register */
+#define CDB 0x2b /* Cache data B register */
+#define CDC 0x2c /* Cache data C register */
+#define CDD 0x2d /* Cache data D register */
+#define CDE 0x2e /* Cache data E register */
+#define CDF 0x2f /* Cache data F register */
+
+/* 0x30-3f seem to be the same as 0x20-2f */
+
+#define PTB 0x40 /* Page table base register */
+#define PTB_MASK 0xfffff000 /* Physical address of the page table in host memory */
+
+#define TCB 0x41 /* Tank cache base register */
+#define TCB_MASK 0xfffff000 /* Physical address of the bottom of host based TRAM */
+
+#define ADCCR 0x42 /* ADC sample rate/stereo control register */
+#define ADCCR_RCHANENABLE 0x00000010 /* Enables right channel for writing to the host */
+#define ADCCR_LCHANENABLE 0x00000008 /* Enables left channel for writing to the host */
+ /* NOTE: To guarantee phase coherency, both channels */
+ /* must be disabled prior to enabling both channels. */
+#define A_ADCCR_RCHANENABLE 0x00000020
+#define A_ADCCR_LCHANENABLE 0x00000010
+
+#define A_ADCCR_SAMPLERATE_MASK 0x0000000F /* Audigy sample rate convertor output rate */
+#define ADCCR_SAMPLERATE_MASK 0x00000007 /* Sample rate convertor output rate */
+#define ADCCR_SAMPLERATE_48 0x00000000 /* 48kHz sample rate */
+#define ADCCR_SAMPLERATE_44 0x00000001 /* 44.1kHz sample rate */
+#define ADCCR_SAMPLERATE_32 0x00000002 /* 32kHz sample rate */
+#define ADCCR_SAMPLERATE_24 0x00000003 /* 24kHz sample rate */
+#define ADCCR_SAMPLERATE_22 0x00000004 /* 22.05kHz sample rate */
+#define ADCCR_SAMPLERATE_16 0x00000005 /* 16kHz sample rate */
+#define ADCCR_SAMPLERATE_11 0x00000006 /* 11.025kHz sample rate */
+#define ADCCR_SAMPLERATE_8 0x00000007 /* 8kHz sample rate */
+#define A_ADCCR_SAMPLERATE_12 0x00000006 /* 12kHz sample rate */
+#define A_ADCCR_SAMPLERATE_11 0x00000007 /* 11.025kHz sample rate */
+#define A_ADCCR_SAMPLERATE_8 0x00000008 /* 8kHz sample rate */
+
+#define FXWC 0x43 /* FX output write channels register */
+ /* When set, each bit enables the writing of the */
+ /* corresponding FX output channel (internal registers */
+ /* 0x20-0x3f) to host memory. This mode of recording */
+ /* is 16bit, 48KHz only. All 32 channels can be enabled */
+ /* simultaneously. */
+
+#define FXWC_DEFAULTROUTE_C (1<<0) /* left emu out? */
+#define FXWC_DEFAULTROUTE_B (1<<1) /* right emu out? */
+#define FXWC_DEFAULTROUTE_A (1<<12)
+#define FXWC_DEFAULTROUTE_D (1<<13)
+#define FXWC_ADCLEFT (1<<18)
+#define FXWC_CDROMSPDIFLEFT (1<<18)
+#define FXWC_ADCRIGHT (1<<19)
+#define FXWC_CDROMSPDIFRIGHT (1<<19)
+#define FXWC_MIC (1<<20)
+#define FXWC_ZOOMLEFT (1<<20)
+#define FXWC_ZOOMRIGHT (1<<21)
+#define FXWC_SPDIFLEFT (1<<22) /* 0x00400000 */
+#define FXWC_SPDIFRIGHT (1<<23) /* 0x00800000 */
+
+#define TCBS 0x44 /* Tank cache buffer size register */
+#define TCBS_MASK 0x00000007 /* Tank cache buffer size field */
+#define TCBS_BUFFSIZE_16K 0x00000000
+#define TCBS_BUFFSIZE_32K 0x00000001
+#define TCBS_BUFFSIZE_64K 0x00000002
+#define TCBS_BUFFSIZE_128K 0x00000003
+#define TCBS_BUFFSIZE_256K 0x00000004
+#define TCBS_BUFFSIZE_512K 0x00000005
+#define TCBS_BUFFSIZE_1024K 0x00000006
+#define TCBS_BUFFSIZE_2048K 0x00000007
+
+#define MICBA 0x45 /* AC97 microphone buffer address register */
+#define MICBA_MASK 0xfffff000 /* 20 bit base address */
+
+#define ADCBA 0x46 /* ADC buffer address register */
+#define ADCBA_MASK 0xfffff000 /* 20 bit base address */
+
+#define FXBA 0x47 /* FX Buffer Address */
+#define FXBA_MASK 0xfffff000 /* 20 bit base address */
+
+/* 0x48 something - word access, defaults to 3f */
+
+#define MICBS 0x49 /* Microphone buffer size register */
+
+#define ADCBS 0x4a /* ADC buffer size register */
+
+#define FXBS 0x4b /* FX buffer size register */
+
+/* register: 0x4c..4f: ffff-ffff current amounts, per-channel */
+
+/* The following mask values define the size of the ADC, MIX and FX buffers in bytes */
+#define ADCBS_BUFSIZE_NONE 0x00000000
+#define ADCBS_BUFSIZE_384 0x00000001
+#define ADCBS_BUFSIZE_448 0x00000002
+#define ADCBS_BUFSIZE_512 0x00000003
+#define ADCBS_BUFSIZE_640 0x00000004
+#define ADCBS_BUFSIZE_768 0x00000005
+#define ADCBS_BUFSIZE_896 0x00000006
+#define ADCBS_BUFSIZE_1024 0x00000007
+#define ADCBS_BUFSIZE_1280 0x00000008
+#define ADCBS_BUFSIZE_1536 0x00000009
+#define ADCBS_BUFSIZE_1792 0x0000000a
+#define ADCBS_BUFSIZE_2048 0x0000000b
+#define ADCBS_BUFSIZE_2560 0x0000000c
+#define ADCBS_BUFSIZE_3072 0x0000000d
+#define ADCBS_BUFSIZE_3584 0x0000000e
+#define ADCBS_BUFSIZE_4096 0x0000000f
+#define ADCBS_BUFSIZE_5120 0x00000010
+#define ADCBS_BUFSIZE_6144 0x00000011
+#define ADCBS_BUFSIZE_7168 0x00000012
+#define ADCBS_BUFSIZE_8192 0x00000013
+#define ADCBS_BUFSIZE_10240 0x00000014
+#define ADCBS_BUFSIZE_12288 0x00000015
+#define ADCBS_BUFSIZE_14366 0x00000016
+#define ADCBS_BUFSIZE_16384 0x00000017
+#define ADCBS_BUFSIZE_20480 0x00000018
+#define ADCBS_BUFSIZE_24576 0x00000019
+#define ADCBS_BUFSIZE_28672 0x0000001a
+#define ADCBS_BUFSIZE_32768 0x0000001b
+#define ADCBS_BUFSIZE_40960 0x0000001c
+#define ADCBS_BUFSIZE_49152 0x0000001d
+#define ADCBS_BUFSIZE_57344 0x0000001e
+#define ADCBS_BUFSIZE_65536 0x0000001f
+
+
+#define CDCS 0x50 /* CD-ROM digital channel status register */
+
+#define GPSCS 0x51 /* General Purpose SPDIF channel status register*/
+
+#define DBG 0x52 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define REG53 0x53 /* DO NOT PROGRAM THIS REGISTER!!! MAY DESTROY CHIP */
+
+#define A_DBG 0x53
+#define A_DBG_SINGLE_STEP 0x00020000 /* Set to zero to start dsp */
+#define A_DBG_ZC 0x40000000 /* zero tram counter */
+#define A_DBG_STEP_ADDR 0x000003ff
+#define A_DBG_SATURATION_OCCURED 0x20000000
+#define A_DBG_SATURATION_ADDR 0x0ffc0000
+
+// NOTE: 0x54,55,56: 64-bit
+#define SPCS0 0x54 /* SPDIF output Channel Status 0 register */
+
+#define SPCS1 0x55 /* SPDIF output Channel Status 1 register */
+
+#define SPCS2 0x56 /* SPDIF output Channel Status 2 register */
+
+#define SPCS_CLKACCYMASK 0x30000000 /* Clock accuracy */
+#define SPCS_CLKACCY_1000PPM 0x00000000 /* 1000 parts per million */
+#define SPCS_CLKACCY_50PPM 0x10000000 /* 50 parts per million */
+#define SPCS_CLKACCY_VARIABLE 0x20000000 /* Variable accuracy */
+#define SPCS_SAMPLERATEMASK 0x0f000000 /* Sample rate */
+#define SPCS_SAMPLERATE_44 0x00000000 /* 44.1kHz sample rate */
+#define SPCS_SAMPLERATE_48 0x02000000 /* 48kHz sample rate */
+#define SPCS_SAMPLERATE_32 0x03000000 /* 32kHz sample rate */
+#define SPCS_CHANNELNUMMASK 0x00f00000 /* Channel number */
+#define SPCS_CHANNELNUM_UNSPEC 0x00000000 /* Unspecified channel number */
+#define SPCS_CHANNELNUM_LEFT 0x00100000 /* Left channel */
+#define SPCS_CHANNELNUM_RIGHT 0x00200000 /* Right channel */
+#define SPCS_SOURCENUMMASK 0x000f0000 /* Source number */
+#define SPCS_SOURCENUM_UNSPEC 0x00000000 /* Unspecified source number */
+#define SPCS_GENERATIONSTATUS 0x00008000 /* Originality flag (see IEC-958 spec) */
+#define SPCS_CATEGORYCODEMASK 0x00007f00 /* Category code (see IEC-958 spec) */
+#define SPCS_MODEMASK 0x000000c0 /* Mode (see IEC-958 spec) */
+#define SPCS_EMPHASISMASK 0x00000038 /* Emphasis */
+#define SPCS_EMPHASIS_NONE 0x00000000 /* No emphasis */
+#define SPCS_EMPHASIS_50_15 0x00000008 /* 50/15 usec 2 channel */
+#define SPCS_COPYRIGHT 0x00000004 /* Copyright asserted flag -- do not modify */
+#define SPCS_NOTAUDIODATA 0x00000002 /* 0 = Digital audio, 1 = not audio */
+#define SPCS_PROFESSIONAL 0x00000001 /* 0 = Consumer (IEC-958), 1 = pro (AES3-1992) */
+
+/* The 32-bit CLIx and SOLx registers all have one bit per channel control/status */
+#define CLIEL 0x58 /* Channel loop interrupt enable low register */
+
+#define CLIEH 0x59 /* Channel loop interrupt enable high register */
+
+#define CLIPL 0x5a /* Channel loop interrupt pending low register */
+
+#define CLIPH 0x5b /* Channel loop interrupt pending high register */
+
+#define SOLEL 0x5c /* Stop on loop enable low register */
+
+#define SOLEH 0x5d /* Stop on loop enable high register */
+
+#define SPBYPASS 0x5e /* SPDIF BYPASS mode register */
+#define SPBYPASS_SPDIF0_MASK 0x00000003 /* SPDIF 0 bypass mode */
+#define SPBYPASS_SPDIF1_MASK 0x0000000c /* SPDIF 1 bypass mode */
+/* bypass mode: 0 - DSP; 1 - SPDIF A, 2 - SPDIF B, 3 - SPDIF C */
+#define SPBYPASS_FORMAT 0x00000f00 /* If 1, SPDIF XX uses 24 bit, if 0 - 20 bit */
+
+#define AC97SLOT 0x5f /* additional AC97 slots enable bits */
+#define AC97SLOT_REAR_RIGHT 0x01 /* Rear left */
+#define AC97SLOT_REAR_LEFT 0x02 /* Rear right */
+#define AC97SLOT_CNTR 0x10 /* Center enable */
+#define AC97SLOT_LFE 0x20 /* LFE enable */
+
+// NOTE: 0x60,61,62: 64-bit
+#define CDSRCS 0x60 /* CD-ROM Sample Rate Converter status register */
+
+#define GPSRCS 0x61 /* General Purpose SPDIF sample rate cvt status */
+
+#define ZVSRCS 0x62 /* ZVideo sample rate converter status */
+ /* NOTE: This one has no SPDIFLOCKED field */
+ /* Assumes sample lock */
+
+/* These three bitfields apply to CDSRCS, GPSRCS, and (except as noted) ZVSRCS. */
+#define SRCS_SPDIFLOCKED 0x02000000 /* SPDIF stream locked */
+#define SRCS_RATELOCKED 0x01000000 /* Sample rate locked */
+#define SRCS_ESTSAMPLERATE 0x0007ffff /* Do not modify this field. */
+
+/* Note that these values can vary +/- by a small amount */
+#define SRCS_SPDIFRATE_44 0x0003acd9
+#define SRCS_SPDIFRATE_48 0x00040000
+#define SRCS_SPDIFRATE_96 0x00080000
+
+#define MICIDX 0x63 /* Microphone recording buffer index register */
+#define MICIDX_MASK 0x0000ffff /* 16-bit value */
+#define MICIDX_IDX 0x10000063
+
+#define ADCIDX 0x64 /* ADC recording buffer index register */
+#define ADCIDX_MASK 0x0000ffff /* 16 bit index field */
+#define ADCIDX_IDX 0x10000064
+
+#define A_ADCIDX 0x63
+#define A_ADCIDX_IDX 0x10000063
+
+#define A_MICIDX 0x64
+#define A_MICIDX_IDX 0x10000064
+
+#define FXIDX 0x65 /* FX recording buffer index register */
+#define FXIDX_MASK 0x0000ffff /* 16-bit value */
+#define FXIDX_IDX 0x10000065
+
+/* The 32-bit HLIx and HLIPx registers all have one bit per channel control/status */
+#define HLIEL 0x66 /* Channel half loop interrupt enable low register */
+
+#define HLIEH 0x67 /* Channel half loop interrupt enable high register */
+
+#define HLIPL 0x68 /* Channel half loop interrupt pending low register */
+
+#define HLIPH 0x69 /* Channel half loop interrupt pending high register */
+
+// 0x6a,6b,6c used for some recording
+// 0x6d unused
+// 0x6e,6f - tanktable base / offset
+
+/* This is the MPU port on the card (via the game port) */
+#define A_MUDATA1 0x70
+#define A_MUCMD1 0x71
+#define A_MUSTAT1 A_MUCMD1
+
+/* This is the MPU port on the Audigy Drive */
+#define A_MUDATA2 0x72
+#define A_MUCMD2 0x73
+#define A_MUSTAT2 A_MUCMD2
+
+/* The next two are the Audigy equivalent of FXWC */
+/* the Audigy can record any output (16bit, 48kHz, up to 64 channel simultaneously) */
+/* Each bit selects a channel for recording */
+#define A_FXWC1 0x74 /* Selects 0x7f-0x60 for FX recording */
+#define A_FXWC2 0x75 /* Selects 0x9f-0x80 for FX recording */
+
+#define A_SPDIF_SAMPLERATE 0x76 /* Set the sample rate of SPDIF output */
+#define A_SPDIF_RATE_MASK 0x000000c0
+#define A_SPDIF_48000 0x00000000
+#define A_SPDIF_44100 0x00000080
+#define A_SPDIF_96000 0x00000040
+
+/* 0x77,0x78,0x79 "something i2s-related" - default to 0x01080000 on my audigy 2 ZS --rlrevell */
+/* 0x7a, 0x7b - lookup tables */
+
+#define A_FXRT2 0x7c
+#define A_FXRT_CHANNELE 0x0000003f /* Effects send bus number for channel's effects send E */
+#define A_FXRT_CHANNELF 0x00003f00 /* Effects send bus number for channel's effects send F */
+#define A_FXRT_CHANNELG 0x003f0000 /* Effects send bus number for channel's effects send G */
+#define A_FXRT_CHANNELH 0x3f000000 /* Effects send bus number for channel's effects send H */
+
+#define A_SENDAMOUNTS 0x7d
+#define A_FXSENDAMOUNT_E_MASK 0xFF000000
+#define A_FXSENDAMOUNT_F_MASK 0x00FF0000
+#define A_FXSENDAMOUNT_G_MASK 0x0000FF00
+#define A_FXSENDAMOUNT_H_MASK 0x000000FF
+/* 0x7c, 0x7e "high bit is used for filtering" */
+
+/* The send amounts for this one are the same as used with the emu10k1 */
+#define A_FXRT1 0x7e
+#define A_FXRT_CHANNELA 0x0000003f
+#define A_FXRT_CHANNELB 0x00003f00
+#define A_FXRT_CHANNELC 0x003f0000
+#define A_FXRT_CHANNELD 0x3f000000
+
+
+/* Each FX general purpose register is 32 bits in length, all bits are used */
+#define FXGPREGBASE 0x100 /* FX general purpose registers base */
+#define A_FXGPREGBASE 0x400 /* Audigy GPRs, 0x400 to 0x5ff */
+
+#define A_TANKMEMCTLREGBASE 0x100 /* Tank memory control registers base - only for Audigy */
+#define A_TANKMEMCTLREG_MASK 0x1f /* only 5 bits used - only for Audigy */
+
+/* Tank audio data is logarithmically compressed down to 16 bits before writing to TRAM and is */
+/* decompressed back to 20 bits on a read. There are a total of 160 locations, the last 32 */
+/* locations are for external TRAM. */
+#define TANKMEMDATAREGBASE 0x200 /* Tank memory data registers base */
+#define TANKMEMDATAREG_MASK 0x000fffff /* 20 bit tank audio data field */
+
+/* Combined address field and memory opcode or flag field. 160 locations, last 32 are external */
+#define TANKMEMADDRREGBASE 0x300 /* Tank memory address registers base */
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
+#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
+#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
+#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
+#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
+
+#define MICROCODEBASE 0x400 /* Microcode data base address */
+
+/* Each DSP microcode instruction is mapped into 2 doublewords */
+/* NOTE: When writing, always write the LO doubleword first. Reads can be in either order. */
+#define LOWORD_OPX_MASK 0x000ffc00 /* Instruction operand X */
+#define LOWORD_OPY_MASK 0x000003ff /* Instruction operand Y */
+#define HIWORD_OPCODE_MASK 0x00f00000 /* Instruction opcode */
+#define HIWORD_RESULT_MASK 0x000ffc00 /* Instruction result */
+#define HIWORD_OPA_MASK 0x000003ff /* Instruction operand A */
+
+
+/* Audigy Soundcard have a different instruction format */
+#define A_MICROCODEBASE 0x600
+#define A_LOWORD_OPY_MASK 0x000007ff
+#define A_LOWORD_OPX_MASK 0x007ff000
+#define A_HIWORD_OPCODE_MASK 0x0f000000
+#define A_HIWORD_RESULT_MASK 0x007ff000
+#define A_HIWORD_OPA_MASK 0x000007ff
+
+
+/* ------------------- STRUCTURES -------------------- */
+
+typedef struct _snd_emu10k1 emu10k1_t;
+typedef struct _snd_emu10k1_voice emu10k1_voice_t;
+typedef struct _snd_emu10k1_pcm emu10k1_pcm_t;
+
+typedef enum {
+ EMU10K1_EFX,
+ EMU10K1_PCM,
+ EMU10K1_SYNTH,
+ EMU10K1_MIDI
+} emu10k1_voice_type_t;
+
+struct _snd_emu10k1_voice {
+ emu10k1_t *emu;
+ int number;
+ unsigned int use: 1,
+ pcm: 1,
+ efx: 1,
+ synth: 1,
+ midi: 1;
+ void (*interrupt)(emu10k1_t *emu, emu10k1_voice_t *pvoice);
+
+ emu10k1_pcm_t *epcm;
+};
+
+typedef enum {
+ PLAYBACK_EMUVOICE,
+ PLAYBACK_EFX,
+ CAPTURE_AC97ADC,
+ CAPTURE_AC97MIC,
+ CAPTURE_EFX
+} snd_emu10k1_pcm_type_t;
+
+struct _snd_emu10k1_pcm {
+ emu10k1_t *emu;
+ snd_emu10k1_pcm_type_t type;
+ snd_pcm_substream_t *substream;
+ emu10k1_voice_t *voices[NUM_EFX_PLAYBACK];
+ emu10k1_voice_t *extra;
+ unsigned short running;
+ unsigned short first_ptr;
+ snd_util_memblk_t *memblk;
+ unsigned int start_addr;
+ unsigned int ccca_start_addr;
+ unsigned int capture_ipr; /* interrupt acknowledge mask */
+ unsigned int capture_inte; /* interrupt enable mask */
+ unsigned int capture_ba_reg; /* buffer address register */
+ unsigned int capture_bs_reg; /* buffer size register */
+ unsigned int capture_idx_reg; /* buffer index register */
+ unsigned int capture_cr_val; /* control value */
+ unsigned int capture_cr_val2; /* control value2 (for audigy) */
+ unsigned int capture_bs_val; /* buffer size value */
+ unsigned int capture_bufsize; /* buffer size in bytes */
+};
+
+typedef struct {
+ /* mono, left, right x 8 sends (4 on emu10k1) */
+ unsigned char send_routing[3][8];
+ unsigned char send_volume[3][8];
+ unsigned short attn[3];
+ emu10k1_pcm_t *epcm;
+} emu10k1_pcm_mixer_t;
+
+#define snd_emu10k1_compose_send_routing(route) \
+((route[0] | (route[1] << 4) | (route[2] << 8) | (route[3] << 12)) << 16)
+
+#define snd_emu10k1_compose_audigy_fxrt1(route) \
+((unsigned int)route[0] | ((unsigned int)route[1] << 8) | ((unsigned int)route[2] << 16) | ((unsigned int)route[3] << 24))
+
+#define snd_emu10k1_compose_audigy_fxrt2(route) \
+((unsigned int)route[4] | ((unsigned int)route[5] << 8) | ((unsigned int)route[6] << 16) | ((unsigned int)route[7] << 24))
+
+typedef struct snd_emu10k1_memblk {
+ snd_util_memblk_t mem;
+ /* private part */
+ int first_page, last_page, pages, mapped_page;
+ unsigned int map_locked;
+ struct list_head mapped_link;
+ struct list_head mapped_order_link;
+} emu10k1_memblk_t;
+
+#define snd_emu10k1_memblk_offset(blk) (((blk)->mapped_page << PAGE_SHIFT) | ((blk)->mem.offset & (PAGE_SIZE - 1)))
+
+#define EMU10K1_MAX_TRAM_BLOCKS_PER_CODE 16
+
+typedef struct {
+ struct list_head list; /* list link container */
+ unsigned int vcount;
+ unsigned int count; /* count of GPR (1..16) */
+ unsigned short gpr[32]; /* GPR number(s) */
+ unsigned int value[32];
+ unsigned int min; /* minimum range */
+ unsigned int max; /* maximum range */
+ unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */
+ snd_kcontrol_t *kcontrol;
+} snd_emu10k1_fx8010_ctl_t;
+
+typedef void (snd_fx8010_irq_handler_t)(emu10k1_t *emu, void *private_data);
+
+typedef struct _snd_emu10k1_fx8010_irq {
+ struct _snd_emu10k1_fx8010_irq *next;
+ snd_fx8010_irq_handler_t *handler;
+ unsigned short gpr_running;
+ void *private_data;
+} snd_emu10k1_fx8010_irq_t;
+
+typedef struct {
+ unsigned int valid: 1,
+ opened: 1,
+ active: 1;
+ unsigned int channels; /* 16-bit channels count */
+ unsigned int tram_start; /* initial ring buffer position in TRAM (in samples) */
+ unsigned int buffer_size; /* count of buffered samples */
+ unsigned short gpr_size; /* GPR containing size of ring buffer in samples (host) */
+ unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
+ unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */
+ unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
+ unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */
+ unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */
+ unsigned char etram[32]; /* external TRAM address & data */
+ snd_pcm_indirect_t pcm_rec;
+ unsigned int tram_pos;
+ unsigned int tram_shift;
+ snd_emu10k1_fx8010_irq_t *irq;
+} snd_emu10k1_fx8010_pcm_t;
+
+typedef struct {
+ unsigned short fxbus_mask; /* used FX buses (bitmask) */
+ unsigned short extin_mask; /* used external inputs (bitmask) */
+ unsigned short extout_mask; /* used external outputs (bitmask) */
+ unsigned short pad1;
+ unsigned int itram_size; /* internal TRAM size in samples */
+ struct snd_dma_buffer etram_pages; /* external TRAM pages and size */
+ unsigned int dbg; /* FX debugger register */
+ unsigned char name[128];
+ int gpr_size; /* size of allocated GPR controls */
+ int gpr_count; /* count of used kcontrols */
+ struct list_head gpr_ctl; /* GPR controls */
+ struct semaphore lock;
+ snd_emu10k1_fx8010_pcm_t pcm[8];
+ spinlock_t irq_lock;
+ snd_emu10k1_fx8010_irq_t *irq_handlers;
+} snd_emu10k1_fx8010_t;
+
+#define emu10k1_gpr_ctl(n) list_entry(n, snd_emu10k1_fx8010_ctl_t, list)
+
+typedef struct {
+ struct _snd_emu10k1 *emu;
+ snd_rawmidi_t *rmidi;
+ snd_rawmidi_substream_t *substream_input;
+ snd_rawmidi_substream_t *substream_output;
+ unsigned int midi_mode;
+ spinlock_t input_lock;
+ spinlock_t output_lock;
+ spinlock_t open_lock;
+ int tx_enable, rx_enable;
+ int port;
+ int ipr_tx, ipr_rx;
+ void (*interrupt)(emu10k1_t *emu, unsigned int status);
+} emu10k1_midi_t;
+
+typedef struct {
+ u32 vendor;
+ u32 device;
+ u32 subsystem;
+ unsigned char emu10k1_chip; /* Original SB Live. Not SB Live 24bit. */
+ unsigned char emu10k2_chip; /* Audigy 1 or Audigy 2. */
+ unsigned char ca0102_chip; /* Audigy 1 or Audigy 2. Not SB Audigy 2 Value. */
+ unsigned char ca0108_chip; /* Audigy 2 Value */
+ unsigned char ca0151_chip; /* P16V */
+ unsigned char spk71; /* Has 7.1 speakers */
+ unsigned char spdif_bug; /* Has Spdif phasing bug */
+ unsigned char ac97_chip; /* Has an AC97 chip */
+ unsigned char ecard; /* APS EEPROM */
+ char * driver;
+ char * name;
+} emu_chip_details_t;
+
+struct _snd_emu10k1 {
+ int irq;
+
+ unsigned long port; /* I/O port number */
+ unsigned int APS: 1, /* APS flag */
+ no_ac97: 1, /* no AC'97 */
+ tos_link: 1, /* tos link detected */
+ rear_ac97: 1, /* rear channels are on AC'97 */
+ spk71:1; /* 7.1 configuration (Audigy 2 ZS) */
+ const emu_chip_details_t *card_capabilities; /* Contains profile of card capabilities */
+ unsigned int audigy; /* is Audigy? */
+ unsigned int revision; /* chip revision */
+ unsigned int serial; /* serial number */
+ unsigned short model; /* subsystem id */
+ unsigned int card_type; /* EMU10K1_CARD_* */
+ unsigned int ecard_ctrl; /* ecard control bits */
+ unsigned long dma_mask; /* PCI DMA mask */
+ int max_cache_pages; /* max memory size / PAGE_SIZE */
+ struct snd_dma_buffer silent_page; /* silent page */
+ struct snd_dma_buffer ptb_pages; /* page table pages */
+ struct snd_dma_device p16v_dma_dev;
+ struct snd_dma_buffer p16v_buffer;
+
+ snd_util_memhdr_t *memhdr; /* page allocation list */
+ emu10k1_memblk_t *reserved_page; /* reserved page */
+
+ struct list_head mapped_link_head;
+ struct list_head mapped_order_link_head;
+ void **page_ptr_table;
+ unsigned long *page_addr_table;
+ spinlock_t memblk_lock;
+
+ unsigned int spdif_bits[3]; /* s/pdif out setup */
+
+ snd_emu10k1_fx8010_t fx8010; /* FX8010 info */
+ int gpr_base;
+
+ ac97_t *ac97;
+
+ struct pci_dev *pci;
+ snd_card_t *card;
+ snd_pcm_t *pcm;
+ snd_pcm_t *pcm_mic;
+ snd_pcm_t *pcm_efx;
+ snd_pcm_t *pcm_p16v;
+
+ spinlock_t synth_lock;
+ void *synth;
+ int (*get_synth_voice)(emu10k1_t *emu);
+
+ spinlock_t reg_lock;
+ spinlock_t emu_lock;
+ spinlock_t voice_lock;
+ struct semaphore ptb_lock;
+
+ emu10k1_voice_t voices[NUM_G];
+ emu10k1_voice_t p16v_voices[4];
+ int p16v_device_offset;
+ emu10k1_pcm_mixer_t pcm_mixer[32];
+ emu10k1_pcm_mixer_t efx_pcm_mixer[NUM_EFX_PLAYBACK];
+ snd_kcontrol_t *ctl_send_routing;
+ snd_kcontrol_t *ctl_send_volume;
+ snd_kcontrol_t *ctl_attn;
+ snd_kcontrol_t *ctl_efx_send_routing;
+ snd_kcontrol_t *ctl_efx_send_volume;
+ snd_kcontrol_t *ctl_efx_attn;
+
+ void (*hwvol_interrupt)(emu10k1_t *emu, unsigned int status);
+ void (*capture_interrupt)(emu10k1_t *emu, unsigned int status);
+ void (*capture_mic_interrupt)(emu10k1_t *emu, unsigned int status);
+ void (*capture_efx_interrupt)(emu10k1_t *emu, unsigned int status);
+ void (*spdif_interrupt)(emu10k1_t *emu, unsigned int status);
+ void (*dsp_interrupt)(emu10k1_t *emu);
+
+ snd_pcm_substream_t *pcm_capture_substream;
+ snd_pcm_substream_t *pcm_capture_mic_substream;
+ snd_pcm_substream_t *pcm_capture_efx_substream;
+ snd_pcm_substream_t *pcm_playback_efx_substream;
+
+ snd_timer_t *timer;
+
+ emu10k1_midi_t midi;
+ emu10k1_midi_t midi2; /* for audigy */
+
+ unsigned int efx_voices_mask[2];
+ unsigned int next_free_voice;
+};
+
+int snd_emu10k1_create(snd_card_t * card,
+ struct pci_dev *pci,
+ unsigned short extin_mask,
+ unsigned short extout_mask,
+ long max_cache_bytes,
+ int enable_ir,
+ emu10k1_t ** remu);
+
+int snd_emu10k1_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_pcm_mic(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_pcm_efx(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_p16v_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_p16v_free(emu10k1_t * emu);
+int snd_p16v_mixer(emu10k1_t * emu);
+int snd_emu10k1_pcm_multi(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_fx8010_pcm(emu10k1_t * emu, int device, snd_pcm_t ** rpcm);
+int snd_emu10k1_mixer(emu10k1_t * emu);
+int snd_emu10k1_timer(emu10k1_t * emu, int device);
+int snd_emu10k1_fx8010_new(emu10k1_t *emu, int device, snd_hwdep_t ** rhwdep);
+
+irqreturn_t snd_emu10k1_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+
+/* initialization */
+void snd_emu10k1_voice_init(emu10k1_t * emu, int voice);
+int snd_emu10k1_init_efx(emu10k1_t *emu);
+void snd_emu10k1_free_efx(emu10k1_t *emu);
+int snd_emu10k1_fx8010_tram_setup(emu10k1_t *emu, u32 size);
+
+/* I/O functions */
+unsigned int snd_emu10k1_ptr_read(emu10k1_t * emu, unsigned int reg, unsigned int chn);
+void snd_emu10k1_ptr_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data);
+unsigned int snd_emu10k1_ptr20_read(emu10k1_t * emu, unsigned int reg, unsigned int chn);
+void snd_emu10k1_ptr20_write(emu10k1_t *emu, unsigned int reg, unsigned int chn, unsigned int data);
+unsigned int snd_emu10k1_efx_read(emu10k1_t *emu, unsigned int pc);
+void snd_emu10k1_intr_enable(emu10k1_t *emu, unsigned int intrenb);
+void snd_emu10k1_intr_disable(emu10k1_t *emu, unsigned int intrenb);
+void snd_emu10k1_voice_intr_enable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_intr_disable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_intr_ack(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_enable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_disable(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_half_loop_intr_ack(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_set_loop_stop(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_voice_clear_loop_stop(emu10k1_t *emu, unsigned int voicenum);
+void snd_emu10k1_wait(emu10k1_t *emu, unsigned int wait);
+static inline unsigned int snd_emu10k1_wc(emu10k1_t *emu) { return (inl(emu->port + WC) >> 6) & 0xfffff; }
+unsigned short snd_emu10k1_ac97_read(ac97_t *ac97, unsigned short reg);
+void snd_emu10k1_ac97_write(ac97_t *ac97, unsigned short reg, unsigned short data);
+unsigned int snd_emu10k1_rate_to_pitch(unsigned int rate);
+
+/* memory allocation */
+snd_util_memblk_t *snd_emu10k1_alloc_pages(emu10k1_t *emu, snd_pcm_substream_t *substream);
+int snd_emu10k1_free_pages(emu10k1_t *emu, snd_util_memblk_t *blk);
+snd_util_memblk_t *snd_emu10k1_synth_alloc(emu10k1_t *emu, unsigned int size);
+int snd_emu10k1_synth_free(emu10k1_t *emu, snd_util_memblk_t *blk);
+int snd_emu10k1_synth_bzero(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, int size);
+int snd_emu10k1_synth_copy_from_user(emu10k1_t *emu, snd_util_memblk_t *blk, int offset, const char __user *data, int size);
+int snd_emu10k1_memblk_map(emu10k1_t *emu, emu10k1_memblk_t *blk);
+
+/* voice allocation */
+int snd_emu10k1_voice_alloc(emu10k1_t *emu, emu10k1_voice_type_t type, int pair, emu10k1_voice_t **rvoice);
+int snd_emu10k1_voice_free(emu10k1_t *emu, emu10k1_voice_t *pvoice);
+
+/* MIDI uart */
+int snd_emu10k1_midi(emu10k1_t * emu);
+int snd_emu10k1_audigy_midi(emu10k1_t * emu);
+
+/* proc interface */
+int snd_emu10k1_proc_init(emu10k1_t * emu);
+
+/* fx8010 irq handler */
+int snd_emu10k1_fx8010_register_irq_handler(emu10k1_t *emu,
+ snd_fx8010_irq_handler_t *handler,
+ unsigned char gpr_running,
+ void *private_data,
+ snd_emu10k1_fx8010_irq_t **r_irq);
+int snd_emu10k1_fx8010_unregister_irq_handler(emu10k1_t *emu,
+ snd_emu10k1_fx8010_irq_t *irq);
+
+#endif /* __KERNEL__ */
+
+/*
+ * ---- FX8010 ----
+ */
+
+#define EMU10K1_CARD_CREATIVE 0x00000000
+#define EMU10K1_CARD_EMUAPS 0x00000001
+
+#define EMU10K1_FX8010_PCM_COUNT 8
+
+/* instruction set */
+#define iMAC0 0x00 /* R = A + (X * Y >> 31) ; saturation */
+#define iMAC1 0x01 /* R = A + (-X * Y >> 31) ; saturation */
+#define iMAC2 0x02 /* R = A + (X * Y >> 31) ; wraparound */
+#define iMAC3 0x03 /* R = A + (-X * Y >> 31) ; wraparound */
+#define iMACINT0 0x04 /* R = A + X * Y ; saturation */
+#define iMACINT1 0x05 /* R = A + X * Y ; wraparound (31-bit) */
+#define iACC3 0x06 /* R = A + X + Y ; saturation */
+#define iMACMV 0x07 /* R = A, acc += X * Y >> 31 */
+#define iANDXOR 0x08 /* R = (A & X) ^ Y */
+#define iTSTNEG 0x09 /* R = (A >= Y) ? X : ~X */
+#define iLIMITGE 0x0a /* R = (A >= Y) ? X : Y */
+#define iLIMITLT 0x0b /* R = (A < Y) ? X : Y */
+#define iLOG 0x0c /* R = linear_data, A (log_data), X (max_exp), Y (format_word) */
+#define iEXP 0x0d /* R = log_data, A (linear_data), X (max_exp), Y (format_word) */
+#define iINTERP 0x0e /* R = A + (X * (Y - A) >> 31) ; saturation */
+#define iSKIP 0x0f /* R = A (cc_reg), X (count), Y (cc_test) */
+
+/* GPRs */
+#define FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x0f */
+#define EXTIN(x) (0x10 + (x)) /* x = 0x00 - 0x0f */
+#define EXTOUT(x) (0x20 + (x)) /* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
+#define FXBUS2(x) (0x30 + (x)) /* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
+ /* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
+
+#define C_00000000 0x40
+#define C_00000001 0x41
+#define C_00000002 0x42
+#define C_00000003 0x43
+#define C_00000004 0x44
+#define C_00000008 0x45
+#define C_00000010 0x46
+#define C_00000020 0x47
+#define C_00000100 0x48
+#define C_00010000 0x49
+#define C_00080000 0x4a
+#define C_10000000 0x4b
+#define C_20000000 0x4c
+#define C_40000000 0x4d
+#define C_80000000 0x4e
+#define C_7fffffff 0x4f
+#define C_ffffffff 0x50
+#define C_fffffffe 0x51
+#define C_c0000000 0x52
+#define C_4f1bbcdc 0x53
+#define C_5a7ef9db 0x54
+#define C_00100000 0x55 /* ?? */
+#define GPR_ACCU 0x56 /* ACCUM, accumulator */
+#define GPR_COND 0x57 /* CCR, condition register */
+#define GPR_NOISE0 0x58 /* noise source */
+#define GPR_NOISE1 0x59 /* noise source */
+#define GPR_IRQ 0x5a /* IRQ register */
+#define GPR_DBAC 0x5b /* TRAM Delay Base Address Counter */
+#define GPR(x) (FXGPREGBASE + (x)) /* free GPRs: x = 0x00 - 0xff */
+#define ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
+#define ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
+#define ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0x7f */
+#define ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x80 + (x)) /* x = 0x00 - 0x1f */
+
+#define A_ITRAM_DATA(x) (TANKMEMDATAREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_DATA(x) (TANKMEMDATAREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+#define A_ITRAM_ADDR(x) (TANKMEMADDRREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_ADDR(x) (TANKMEMADDRREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+#define A_ITRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
+#define A_ETRAM_CTL(x) (A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
+
+#define A_FXBUS(x) (0x00 + (x)) /* x = 0x00 - 0x3f FX buses */
+#define A_EXTIN(x) (0x40 + (x)) /* x = 0x00 - 0x0f physical ins */
+#define A_P16VIN(x) (0x50 + (x)) /* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
+#define A_EXTOUT(x) (0x60 + (x)) /* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown */
+#define A_FXBUS2(x) (0x80 + (x)) /* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
+#define A_EMU32OUTH(x) (0xa0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
+#define A_EMU32OUTL(x) (0xb0 + (x)) /* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
+#define A_GPR(x) (A_FXGPREGBASE + (x))
+
+/* cc_reg constants */
+#define CC_REG_NORMALIZED C_00000001
+#define CC_REG_BORROW C_00000002
+#define CC_REG_MINUS C_00000004
+#define CC_REG_ZERO C_00000008
+#define CC_REG_SATURATE C_00000010
+#define CC_REG_NONZERO C_00000100
+
+/* FX buses */
+#define FXBUS_PCM_LEFT 0x00
+#define FXBUS_PCM_RIGHT 0x01
+#define FXBUS_PCM_LEFT_REAR 0x02
+#define FXBUS_PCM_RIGHT_REAR 0x03
+#define FXBUS_MIDI_LEFT 0x04
+#define FXBUS_MIDI_RIGHT 0x05
+#define FXBUS_PCM_CENTER 0x06
+#define FXBUS_PCM_LFE 0x07
+#define FXBUS_PCM_LEFT_FRONT 0x08
+#define FXBUS_PCM_RIGHT_FRONT 0x09
+#define FXBUS_MIDI_REVERB 0x0c
+#define FXBUS_MIDI_CHORUS 0x0d
+#define FXBUS_PCM_LEFT_SIDE 0x0e
+#define FXBUS_PCM_RIGHT_SIDE 0x0f
+#define FXBUS_PT_LEFT 0x14
+#define FXBUS_PT_RIGHT 0x15
+
+/* Inputs */
+#define EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
+#define EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
+#define EXTIN_SPDIF_CD_L 0x02 /* internal S/PDIF CD - onboard - left */
+#define EXTIN_SPDIF_CD_R 0x03 /* internal S/PDIF CD - onboard - right */
+#define EXTIN_ZOOM_L 0x04 /* Zoom Video I2S - left */
+#define EXTIN_ZOOM_R 0x05 /* Zoom Video I2S - right */
+#define EXTIN_TOSLINK_L 0x06 /* LiveDrive - TOSLink Optical - left */
+#define EXTIN_TOSLINK_R 0x07 /* LiveDrive - TOSLink Optical - right */
+#define EXTIN_LINE1_L 0x08 /* LiveDrive - Line/Mic 1 - left */
+#define EXTIN_LINE1_R 0x09 /* LiveDrive - Line/Mic 1 - right */
+#define EXTIN_COAX_SPDIF_L 0x0a /* LiveDrive - Coaxial S/PDIF - left */
+#define EXTIN_COAX_SPDIF_R 0x0b /* LiveDrive - Coaxial S/PDIF - right */
+#define EXTIN_LINE2_L 0x0c /* LiveDrive - Line/Mic 2 - left */
+#define EXTIN_LINE2_R 0x0d /* LiveDrive - Line/Mic 2 - right */
+
+/* Outputs */
+#define EXTOUT_AC97_L 0x00 /* AC'97 playback channel - left */
+#define EXTOUT_AC97_R 0x01 /* AC'97 playback channel - right */
+#define EXTOUT_TOSLINK_L 0x02 /* LiveDrive - TOSLink Optical - left */
+#define EXTOUT_TOSLINK_R 0x03 /* LiveDrive - TOSLink Optical - right */
+#define EXTOUT_AC97_CENTER 0x04 /* SB Live 5.1 - center */
+#define EXTOUT_AC97_LFE 0x05 /* SB Live 5.1 - LFE */
+#define EXTOUT_HEADPHONE_L 0x06 /* LiveDrive - Headphone - left */
+#define EXTOUT_HEADPHONE_R 0x07 /* LiveDrive - Headphone - right */
+#define EXTOUT_REAR_L 0x08 /* Rear channel - left */
+#define EXTOUT_REAR_R 0x09 /* Rear channel - right */
+#define EXTOUT_ADC_CAP_L 0x0a /* ADC Capture buffer - left */
+#define EXTOUT_ADC_CAP_R 0x0b /* ADC Capture buffer - right */
+#define EXTOUT_MIC_CAP 0x0c /* MIC Capture buffer */
+#define EXTOUT_AC97_REAR_L 0x0d /* SB Live 5.1 (c) 2003 - Rear Left */
+#define EXTOUT_AC97_REAR_R 0x0e /* SB Live 5.1 (c) 2003 - Rear Right */
+#define EXTOUT_ACENTER 0x11 /* Analog Center */
+#define EXTOUT_ALFE 0x12 /* Analog LFE */
+
+/* Audigy Inputs */
+#define A_EXTIN_AC97_L 0x00 /* AC'97 capture channel - left */
+#define A_EXTIN_AC97_R 0x01 /* AC'97 capture channel - right */
+#define A_EXTIN_SPDIF_CD_L 0x02 /* digital CD left */
+#define A_EXTIN_SPDIF_CD_R 0x03 /* digital CD left */
+#define A_EXTIN_OPT_SPDIF_L 0x04 /* audigy drive Optical SPDIF - left */
+#define A_EXTIN_OPT_SPDIF_R 0x05 /* right */
+#define A_EXTIN_LINE2_L 0x08 /* audigy drive line2/mic2 - left */
+#define A_EXTIN_LINE2_R 0x09 /* right */
+#define A_EXTIN_ADC_L 0x0a /* Philips ADC - left */
+#define A_EXTIN_ADC_R 0x0b /* right */
+#define A_EXTIN_AUX2_L 0x0c /* audigy drive aux2 - left */
+#define A_EXTIN_AUX2_R 0x0d /* - right */
+
+/* Audigiy Outputs */
+#define A_EXTOUT_FRONT_L 0x00 /* digital front left */
+#define A_EXTOUT_FRONT_R 0x01 /* right */
+#define A_EXTOUT_CENTER 0x02 /* digital front center */
+#define A_EXTOUT_LFE 0x03 /* digital front lfe */
+#define A_EXTOUT_HEADPHONE_L 0x04 /* headphone audigy drive left */
+#define A_EXTOUT_HEADPHONE_R 0x05 /* right */
+#define A_EXTOUT_REAR_L 0x06 /* digital rear left */
+#define A_EXTOUT_REAR_R 0x07 /* right */
+#define A_EXTOUT_AFRONT_L 0x08 /* analog front left */
+#define A_EXTOUT_AFRONT_R 0x09 /* right */
+#define A_EXTOUT_ACENTER 0x0a /* analog center */
+#define A_EXTOUT_ALFE 0x0b /* analog LFE */
+#define A_EXTOUT_ASIDE_L 0x0c /* analog side left - Audigy 2 ZS */
+#define A_EXTOUT_ASIDE_R 0x0d /* right - Audigy 2 ZS */
+#define A_EXTOUT_AREAR_L 0x0e /* analog rear left */
+#define A_EXTOUT_AREAR_R 0x0f /* right */
+#define A_EXTOUT_AC97_L 0x10 /* AC97 left (front) */
+#define A_EXTOUT_AC97_R 0x11 /* right */
+#define A_EXTOUT_ADC_CAP_L 0x16 /* ADC capture buffer left */
+#define A_EXTOUT_ADC_CAP_R 0x17 /* right */
+#define A_EXTOUT_MIC_CAP 0x18 /* Mic capture buffer */
+
+/* Audigy constants */
+#define A_C_00000000 0xc0
+#define A_C_00000001 0xc1
+#define A_C_00000002 0xc2
+#define A_C_00000003 0xc3
+#define A_C_00000004 0xc4
+#define A_C_00000008 0xc5
+#define A_C_00000010 0xc6
+#define A_C_00000020 0xc7
+#define A_C_00000100 0xc8
+#define A_C_00010000 0xc9
+#define A_C_00000800 0xca
+#define A_C_10000000 0xcb
+#define A_C_20000000 0xcc
+#define A_C_40000000 0xcd
+#define A_C_80000000 0xce
+#define A_C_7fffffff 0xcf
+#define A_C_ffffffff 0xd0
+#define A_C_fffffffe 0xd1
+#define A_C_c0000000 0xd2
+#define A_C_4f1bbcdc 0xd3
+#define A_C_5a7ef9db 0xd4
+#define A_C_00100000 0xd5
+#define A_GPR_ACCU 0xd6 /* ACCUM, accumulator */
+#define A_GPR_COND 0xd7 /* CCR, condition register */
+#define A_GPR_NOISE0 0xd8 /* noise source */
+#define A_GPR_NOISE1 0xd9 /* noise source */
+#define A_GPR_IRQ 0xda /* IRQ register */
+#define A_GPR_DBAC 0xdb /* TRAM Delay Base Address Counter - internal */
+#define A_GPR_DBACE 0xde /* TRAM Delay Base Address Counter - external */
+
+/* definitions for debug register */
+#define EMU10K1_DBG_ZC 0x80000000 /* zero tram counter */
+#define EMU10K1_DBG_SATURATION_OCCURED 0x02000000 /* saturation control */
+#define EMU10K1_DBG_SATURATION_ADDR 0x01ff0000 /* saturation address */
+#define EMU10K1_DBG_SINGLE_STEP 0x00008000 /* single step mode */
+#define EMU10K1_DBG_STEP 0x00004000 /* start single step */
+#define EMU10K1_DBG_CONDITION_CODE 0x00003e00 /* condition code */
+#define EMU10K1_DBG_SINGLE_STEP_ADDR 0x000001ff /* single step address */
+
+/* tank memory address line */
+#ifndef __KERNEL__
+#define TANKMEMADDRREG_ADDR_MASK 0x000fffff /* 20 bit tank address field */
+#define TANKMEMADDRREG_CLEAR 0x00800000 /* Clear tank memory */
+#define TANKMEMADDRREG_ALIGN 0x00400000 /* Align read or write relative to tank access */
+#define TANKMEMADDRREG_WRITE 0x00200000 /* Write to tank memory */
+#define TANKMEMADDRREG_READ 0x00100000 /* Read from tank memory */
+#endif
+
+typedef struct {
+ unsigned int card; /* card type */
+ unsigned int internal_tram_size; /* in samples */
+ unsigned int external_tram_size; /* in samples */
+ char fxbus_names[16][32]; /* names of FXBUSes */
+ char extin_names[16][32]; /* names of external inputs */
+ char extout_names[32][32]; /* names of external outputs */
+ unsigned int gpr_controls; /* count of GPR controls */
+} emu10k1_fx8010_info_t;
+
+#define EMU10K1_GPR_TRANSLATION_NONE 0
+#define EMU10K1_GPR_TRANSLATION_TABLE100 1
+#define EMU10K1_GPR_TRANSLATION_BASS 2
+#define EMU10K1_GPR_TRANSLATION_TREBLE 3
+#define EMU10K1_GPR_TRANSLATION_ONOFF 4
+
+typedef struct {
+ snd_ctl_elem_id_t id; /* full control ID definition */
+ unsigned int vcount; /* visible count */
+ unsigned int count; /* count of GPR (1..16) */
+ unsigned short gpr[32]; /* GPR number(s) */
+ unsigned int value[32]; /* initial values */
+ unsigned int min; /* minimum range */
+ unsigned int max; /* maximum range */
+ unsigned int translation; /* translation type (EMU10K1_GPR_TRANSLATION*) */
+} emu10k1_fx8010_control_gpr_t;
+
+typedef struct {
+ char name[128];
+
+ DECLARE_BITMAP(gpr_valid, 0x200); /* bitmask of valid initializers */
+ u_int32_t __user *gpr_map; /* initializers */
+
+ unsigned int gpr_add_control_count; /* count of GPR controls to add/replace */
+ emu10k1_fx8010_control_gpr_t __user *gpr_add_controls; /* GPR controls to add/replace */
+
+ unsigned int gpr_del_control_count; /* count of GPR controls to remove */
+ snd_ctl_elem_id_t __user *gpr_del_controls; /* IDs of GPR controls to remove */
+
+ unsigned int gpr_list_control_count; /* count of GPR controls to list */
+ unsigned int gpr_list_control_total; /* total count of GPR controls */
+ emu10k1_fx8010_control_gpr_t __user *gpr_list_controls; /* listed GPR controls */
+
+ DECLARE_BITMAP(tram_valid, 0x100); /* bitmask of valid initializers */
+ u_int32_t __user *tram_data_map; /* data initializers */
+ u_int32_t __user *tram_addr_map; /* map initializers */
+
+ DECLARE_BITMAP(code_valid, 1024); /* bitmask of valid instructions */
+ u_int32_t __user *code; /* one instruction - 64 bits */
+} emu10k1_fx8010_code_t;
+
+typedef struct {
+ unsigned int address; /* 31.bit == 1 -> external TRAM */
+ unsigned int size; /* size in samples (4 bytes) */
+ unsigned int *samples; /* pointer to samples (20-bit) */
+ /* NULL->clear memory */
+} emu10k1_fx8010_tram_t;
+
+typedef struct {
+ unsigned int substream; /* substream number */
+ unsigned int res1; /* reserved */
+ unsigned int channels; /* 16-bit channels count, zero = remove this substream */
+ unsigned int tram_start; /* ring buffer position in TRAM (in samples) */
+ unsigned int buffer_size; /* count of buffered samples */
+ unsigned short gpr_size; /* GPR containing size of ringbuffer in samples (host) */
+ unsigned short gpr_ptr; /* GPR containing current pointer in the ring buffer (host = reset, FX8010) */
+ unsigned short gpr_count; /* GPR containing count of samples between two interrupts (host) */
+ unsigned short gpr_tmpcount; /* GPR containing current count of samples to interrupt (host = set, FX8010) */
+ unsigned short gpr_trigger; /* GPR containing trigger (activate) information (host) */
+ unsigned short gpr_running; /* GPR containing info if PCM is running (FX8010) */
+ unsigned char pad; /* reserved */
+ unsigned char etram[32]; /* external TRAM address & data (one per channel) */
+ unsigned int res2; /* reserved */
+} emu10k1_fx8010_pcm_t;
+
+#define SNDRV_EMU10K1_IOCTL_INFO _IOR ('H', 0x10, emu10k1_fx8010_info_t)
+#define SNDRV_EMU10K1_IOCTL_CODE_POKE _IOW ('H', 0x11, emu10k1_fx8010_code_t)
+#define SNDRV_EMU10K1_IOCTL_CODE_PEEK _IOWR('H', 0x12, emu10k1_fx8010_code_t)
+#define SNDRV_EMU10K1_IOCTL_TRAM_SETUP _IOW ('H', 0x20, int)
+#define SNDRV_EMU10K1_IOCTL_TRAM_POKE _IOW ('H', 0x21, emu10k1_fx8010_tram_t)
+#define SNDRV_EMU10K1_IOCTL_TRAM_PEEK _IOWR('H', 0x22, emu10k1_fx8010_tram_t)
+#define SNDRV_EMU10K1_IOCTL_PCM_POKE _IOW ('H', 0x30, emu10k1_fx8010_pcm_t)
+#define SNDRV_EMU10K1_IOCTL_PCM_PEEK _IOWR('H', 0x31, emu10k1_fx8010_pcm_t)
+#define SNDRV_EMU10K1_IOCTL_STOP _IO ('H', 0x80)
+#define SNDRV_EMU10K1_IOCTL_CONTINUE _IO ('H', 0x81)
+#define SNDRV_EMU10K1_IOCTL_ZERO_TRAM_COUNTER _IO ('H', 0x82)
+#define SNDRV_EMU10K1_IOCTL_SINGLE_STEP _IOW ('H', 0x83, int)
+#define SNDRV_EMU10K1_IOCTL_DBG_READ _IOR ('H', 0x84, int)
+
+#endif /* __SOUND_EMU10K1_H */