x86/entry: Move C entry and exit code to arch/x86/entry/common.c
The entry and exit C helpers were confusingly scattered between
ptrace.c and signal.c, even though they aren't specific to
ptrace or signal handling. Move them together in a new file.
This change just moves code around. It doesn't change anything.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/324d686821266544d8572423cc281f961da445f4.1435952415.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
new file mode 100644
index 0000000..917d0c3
--- /dev/null
+++ b/arch/x86/entry/common.c
@@ -0,0 +1,253 @@
+/*
+ * common.c - C code for kernel entry and exit
+ * Copyright (c) 2015 Andrew Lutomirski
+ * GPL v2
+ *
+ * Based on asm and ptrace code by many authors. The code here originated
+ * in ptrace.c and signal.c.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/tracehook.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/signal.h>
+#include <linux/export.h>
+#include <linux/context_tracking.h>
+#include <linux/user-return-notifier.h>
+#include <linux/uprobes.h>
+
+#include <asm/desc.h>
+#include <asm/traps.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch)
+{
+#ifdef CONFIG_X86_64
+ if (arch == AUDIT_ARCH_X86_64) {
+ audit_syscall_entry(regs->orig_ax, regs->di,
+ regs->si, regs->dx, regs->r10);
+ } else
+#endif
+ {
+ audit_syscall_entry(regs->orig_ax, regs->bx,
+ regs->cx, regs->dx, regs->si);
+ }
+}
+
+/*
+ * We can return 0 to resume the syscall or anything else to go to phase
+ * 2. If we resume the syscall, we need to put something appropriate in
+ * regs->orig_ax.
+ *
+ * NB: We don't have full pt_regs here, but regs->orig_ax and regs->ax
+ * are fully functional.
+ *
+ * For phase 2's benefit, our return value is:
+ * 0: resume the syscall
+ * 1: go to phase 2; no seccomp phase 2 needed
+ * anything else: go to phase 2; pass return value to seccomp
+ */
+unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
+{
+ unsigned long ret = 0;
+ u32 work;
+
+ BUG_ON(regs != task_pt_regs(current));
+
+ work = ACCESS_ONCE(current_thread_info()->flags) &
+ _TIF_WORK_SYSCALL_ENTRY;
+
+ /*
+ * If TIF_NOHZ is set, we are required to call user_exit() before
+ * doing anything that could touch RCU.
+ */
+ if (work & _TIF_NOHZ) {
+ user_exit();
+ work &= ~_TIF_NOHZ;
+ }
+
+#ifdef CONFIG_SECCOMP
+ /*
+ * Do seccomp first -- it should minimize exposure of other
+ * code, and keeping seccomp fast is probably more valuable
+ * than the rest of this.
+ */
+ if (work & _TIF_SECCOMP) {
+ struct seccomp_data sd;
+
+ sd.arch = arch;
+ sd.nr = regs->orig_ax;
+ sd.instruction_pointer = regs->ip;
+#ifdef CONFIG_X86_64
+ if (arch == AUDIT_ARCH_X86_64) {
+ sd.args[0] = regs->di;
+ sd.args[1] = regs->si;
+ sd.args[2] = regs->dx;
+ sd.args[3] = regs->r10;
+ sd.args[4] = regs->r8;
+ sd.args[5] = regs->r9;
+ } else
+#endif
+ {
+ sd.args[0] = regs->bx;
+ sd.args[1] = regs->cx;
+ sd.args[2] = regs->dx;
+ sd.args[3] = regs->si;
+ sd.args[4] = regs->di;
+ sd.args[5] = regs->bp;
+ }
+
+ BUILD_BUG_ON(SECCOMP_PHASE1_OK != 0);
+ BUILD_BUG_ON(SECCOMP_PHASE1_SKIP != 1);
+
+ ret = seccomp_phase1(&sd);
+ if (ret == SECCOMP_PHASE1_SKIP) {
+ regs->orig_ax = -1;
+ ret = 0;
+ } else if (ret != SECCOMP_PHASE1_OK) {
+ return ret; /* Go directly to phase 2 */
+ }
+
+ work &= ~_TIF_SECCOMP;
+ }
+#endif
+
+ /* Do our best to finish without phase 2. */
+ if (work == 0)
+ return ret; /* seccomp and/or nohz only (ret == 0 here) */
+
+#ifdef CONFIG_AUDITSYSCALL
+ if (work == _TIF_SYSCALL_AUDIT) {
+ /*
+ * If there is no more work to be done except auditing,
+ * then audit in phase 1. Phase 2 always audits, so, if
+ * we audit here, then we can't go on to phase 2.
+ */
+ do_audit_syscall_entry(regs, arch);
+ return 0;
+ }
+#endif
+
+ return 1; /* Something is enabled that we can't handle in phase 1 */
+}
+
+/* Returns the syscall nr to run (which should match regs->orig_ax). */
+long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch,
+ unsigned long phase1_result)
+{
+ long ret = 0;
+ u32 work = ACCESS_ONCE(current_thread_info()->flags) &
+ _TIF_WORK_SYSCALL_ENTRY;
+
+ BUG_ON(regs != task_pt_regs(current));
+
+ /*
+ * If we stepped into a sysenter/syscall insn, it trapped in
+ * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+ * If user-mode had set TF itself, then it's still clear from
+ * do_debug() and we need to set it again to restore the user
+ * state. If we entered on the slow path, TF was already set.
+ */
+ if (work & _TIF_SINGLESTEP)
+ regs->flags |= X86_EFLAGS_TF;
+
+#ifdef CONFIG_SECCOMP
+ /*
+ * Call seccomp_phase2 before running the other hooks so that
+ * they can see any changes made by a seccomp tracer.
+ */
+ if (phase1_result > 1 && seccomp_phase2(phase1_result)) {
+ /* seccomp failures shouldn't expose any additional code. */
+ return -1;
+ }
+#endif
+
+ if (unlikely(work & _TIF_SYSCALL_EMU))
+ ret = -1L;
+
+ if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) &&
+ tracehook_report_syscall_entry(regs))
+ ret = -1L;
+
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_enter(regs, regs->orig_ax);
+
+ do_audit_syscall_entry(regs, arch);
+
+ return ret ?: regs->orig_ax;
+}
+
+long syscall_trace_enter(struct pt_regs *regs)
+{
+ u32 arch = is_ia32_task() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64;
+ unsigned long phase1_result = syscall_trace_enter_phase1(regs, arch);
+
+ if (phase1_result == 0)
+ return regs->orig_ax;
+ else
+ return syscall_trace_enter_phase2(regs, arch, phase1_result);
+}
+
+void syscall_trace_leave(struct pt_regs *regs)
+{
+ bool step;
+
+ /*
+ * We may come here right after calling schedule_user()
+ * or do_notify_resume(), in which case we can be in RCU
+ * user mode.
+ */
+ user_exit();
+
+ audit_syscall_exit(regs);
+
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_exit(regs, regs->ax);
+
+ /*
+ * If TIF_SYSCALL_EMU is set, we only get here because of
+ * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
+ * We already reported this syscall instruction in
+ * syscall_trace_enter().
+ */
+ step = unlikely(test_thread_flag(TIF_SINGLESTEP)) &&
+ !test_thread_flag(TIF_SYSCALL_EMU);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
+
+ user_enter();
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+__visible void
+do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
+{
+ user_exit();
+
+ if (thread_info_flags & _TIF_UPROBE)
+ uprobe_notify_resume(regs);
+
+ /* deal with pending signal delivery */
+ if (thread_info_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+ if (thread_info_flags & _TIF_USER_RETURN_NOTIFY)
+ fire_user_return_notifiers();
+
+ user_enter();
+}