usb: chipidea: add runtime power management support
Add runtime power management support.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index a57dc88..63d2b39 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -491,6 +491,13 @@
irqreturn_t ret = IRQ_NONE;
u32 otgsc = 0;
+ if (ci->in_lpm) {
+ disable_irq_nosync(irq);
+ ci->wakeup_int = true;
+ pm_runtime_get(ci->dev);
+ return IRQ_HANDLED;
+ }
+
if (ci->is_otg) {
otgsc = hw_read_otgsc(ci, ~0);
if (ci_otg_is_fsm_mode(ci)) {
@@ -673,6 +680,8 @@
ci->platdata = dev_get_platdata(dev);
ci->imx28_write_fix = !!(ci->platdata->flags &
CI_HDRC_IMX28_WRITE_FIX);
+ ci->supports_runtime_pm = !!(ci->platdata->flags &
+ CI_HDRC_SUPPORTS_RUNTIME_PM);
ret = hw_device_init(ci, base);
if (ret < 0) {
@@ -788,6 +797,14 @@
if (ret)
goto stop;
+ if (ci->supports_runtime_pm) {
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+ pm_runtime_mark_last_busy(ci->dev);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ }
+
if (ci_otg_is_fsm_mode(ci))
ci_hdrc_otg_fsm_start(ci);
@@ -807,6 +824,12 @@
{
struct ci_hdrc *ci = platform_get_drvdata(pdev);
+ if (ci->supports_runtime_pm) {
+ pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+ }
+
dbg_remove_files(ci);
ci_role_destroy(ci);
ci_hdrc_enter_lpm(ci, true);
@@ -815,13 +838,14 @@
return 0;
}
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
static void ci_controller_suspend(struct ci_hdrc *ci)
{
+ disable_irq(ci->irq);
ci_hdrc_enter_lpm(ci, true);
-
- if (ci->usb_phy)
- usb_phy_set_suspend(ci->usb_phy, 1);
+ usb_phy_set_suspend(ci->usb_phy, 1);
+ ci->in_lpm = true;
+ enable_irq(ci->irq);
}
static int ci_controller_resume(struct device *dev)
@@ -830,23 +854,49 @@
dev_dbg(dev, "at %s\n", __func__);
- ci_hdrc_enter_lpm(ci, false);
+ if (!ci->in_lpm) {
+ WARN_ON(1);
+ return 0;
+ }
+ ci_hdrc_enter_lpm(ci, false);
if (ci->usb_phy) {
usb_phy_set_suspend(ci->usb_phy, 0);
usb_phy_set_wakeup(ci->usb_phy, false);
hw_wait_phy_stable();
}
+ ci->in_lpm = false;
+ if (ci->wakeup_int) {
+ ci->wakeup_int = false;
+ pm_runtime_mark_last_busy(ci->dev);
+ pm_runtime_put_autosuspend(ci->dev);
+ enable_irq(ci->irq);
+ }
+
return 0;
}
+#ifdef CONFIG_PM_SLEEP
static int ci_suspend(struct device *dev)
{
struct ci_hdrc *ci = dev_get_drvdata(dev);
if (ci->wq)
flush_workqueue(ci->wq);
+ /*
+ * Controller needs to be active during suspend, otherwise the core
+ * may run resume when the parent is at suspend if other driver's
+ * suspend fails, it occurs before parent's suspend has not started,
+ * but the core suspend has finished.
+ */
+ if (ci->in_lpm)
+ pm_runtime_resume(dev);
+
+ if (ci->in_lpm) {
+ WARN_ON(1);
+ return 0;
+ }
ci_controller_suspend(ci);
@@ -855,13 +905,51 @@
static int ci_resume(struct device *dev)
{
- return ci_controller_resume(dev);
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
+ int ret;
+
+ ret = ci_controller_resume(dev);
+ if (ret)
+ return ret;
+
+ if (ci->supports_runtime_pm) {
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ }
+
+ return ret;
}
#endif /* CONFIG_PM_SLEEP */
+static int ci_runtime_suspend(struct device *dev)
+{
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "at %s\n", __func__);
+
+ if (ci->in_lpm) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ usb_phy_set_wakeup(ci->usb_phy, true);
+ ci_controller_suspend(ci);
+
+ return 0;
+}
+
+static int ci_runtime_resume(struct device *dev)
+{
+ return ci_controller_resume(dev);
+}
+
+#endif /* CONFIG_PM */
static const struct dev_pm_ops ci_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ci_suspend, ci_resume)
+ SET_RUNTIME_PM_OPS(ci_runtime_suspend, ci_runtime_resume, NULL)
};
+
static struct platform_driver ci_hdrc_driver = {
.probe = ci_hdrc_probe,
.remove = ci_hdrc_remove,