[SCSI] mpt2sas: MPI header version N is updated.
Updating MPI header version N.
Removed mpi_history.txt.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index d4e9d6f..e3728d7 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.13
+ * mpi2_cnfg.h Version: 02.00.14
*
* Version History
* ---------------
@@ -109,6 +109,18 @@
* Added Ethernet configuration pages.
* 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
* Added SAS PHY Page 4 structure and defines.
+ * 02-10-10 02.00.14 Modified the comments for the configuration page
+ * structures that contain an array of data. The host
+ * should use the "count" field in the page data (e.g. the
+ * NumPhys field) to determine the number of valid elements
+ * in the array.
+ * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
+ * Added PowerManagementCapabilities to IO Unit Page 7.
+ * Added PortWidthModGroup field to
+ * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
+ * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
* --------------------------------------------------------------------------
*/
@@ -373,8 +385,9 @@
#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
-#define MPI2_MFGPAGE_DEVID_SAS2208_7 (0x0086)
-#define MPI2_MFGPAGE_DEVID_SAS2208_8 (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
+#define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
/* Manufacturing Page 0 */
@@ -540,7 +553,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
@@ -618,7 +631,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
@@ -731,7 +744,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
+ * one and check the value returned for GPIOCount at runtime.
*/
#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
@@ -760,7 +773,7 @@
/*
* Upper layer code (drivers, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumDmaEngines at runtime.
+ * one and check the value returned for NumDmaEngines at runtime.
*/
#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
@@ -823,7 +836,7 @@
U8 PCIeWidth; /* 0x06 */
U8 PCIeSpeed; /* 0x07 */
U32 ProcessorState; /* 0x08 */
- U32 Reserved2; /* 0x0C */
+ U32 PowerManagementCapabilities; /* 0x0C */
U16 IOCTemperature; /* 0x10 */
U8 IOCTemperatureUnits; /* 0x12 */
U8 IOCSpeed; /* 0x13 */
@@ -831,7 +844,7 @@
} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
-#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00)
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x01)
/* defines for IO Unit Page 7 PCIeWidth field */
#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
@@ -852,6 +865,14 @@
#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
+/* defines for IO Unit Page 7 PowerManagementCapabilities field */
+#define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
+#define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
+#define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008)
+#define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004)
+
+
/* defines for IO Unit Page 7 IOCTemperatureUnits field */
#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
@@ -1195,7 +1216,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
@@ -1269,7 +1290,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
+ * one and check the value returned for NumPhysDisks at runtime.
*/
#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
@@ -1471,7 +1492,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength or NumPhysDiskPaths at runtime.
+ * one and check the value returned for NumPhysDiskPaths at runtime.
*/
#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
@@ -1633,7 +1654,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT0_PHY_MAX
#define MPI2_SAS_IOUNIT0_PHY_MAX (1)
@@ -1704,7 +1725,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT1_PHY_MAX
#define MPI2_SAS_IOUNIT1_PHY_MAX (1)
@@ -1795,7 +1816,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * four and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT4_PHY_MAX
#define MPI2_SAS_IOUNIT4_PHY_MAX (4)
@@ -1833,7 +1854,7 @@
typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
U8 ControlFlags; /* 0x00 */
- U8 Reserved1; /* 0x01 */
+ U8 PortWidthModGroup; /* 0x01 */
U16 InactivityTimerExponent; /* 0x02 */
U8 SATAPartialTimeout; /* 0x04 */
U8 Reserved2; /* 0x05 */
@@ -1853,6 +1874,9 @@
#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
+/* defines for PortWidthModeGroup field */
+#define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
+
/* defines for InactivityTimerExponent field */
#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
@@ -1874,7 +1898,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumPhys at runtime.
*/
#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
@@ -1892,7 +1916,132 @@
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
-#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00)
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
+
+
+/* SAS IO Unit Page 6 */
+
+typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
+ U8 CurrentStatus; /* 0x00 */
+ U8 CurrentModulation; /* 0x01 */
+ U8 CurrentUtilization; /* 0x02 */
+ U8 Reserved1; /* 0x03 */
+ U32 Reserved2; /* 0x04 */
+} MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+ MPI2_POINTER PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
+ Mpi2SasIOUnit6PortWidthModGroupStatus_t,
+ MPI2_POINTER pMpi2SasIOUnit6PortWidthModGroupStatus_t;
+
+/* defines for CurrentStatus field */
+#define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
+#define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
+#define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
+#define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
+#define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
+#define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
+#define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
+
+/* defines for CurrentModulation field */
+#define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
+#define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
+#define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
+#define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
+#define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+ U8 NumGroups; /* 0x10 */
+ U8 Reserved3; /* 0x11 */
+ U16 Reserved4; /* 0x12 */
+ MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
+ PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /* 0x14 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_6,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
+ Mpi2SasIOUnitPage6_t, MPI2_POINTER pMpi2SasIOUnitPage6_t;
+
+#define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
+
+
+/* SAS IO Unit Page 7 */
+
+typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
+ U8 Flags; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U8 Threshold75Pct; /* 0x04 */
+ U8 Threshold50Pct; /* 0x05 */
+ U8 Threshold25Pct; /* 0x06 */
+ U8 Reserved3; /* 0x07 */
+} MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+ MPI2_POINTER PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
+ Mpi2SasIOUnit7PortWidthModGroupSettings_t,
+ MPI2_POINTER pMpi2SasIOUnit7PortWidthModGroupSettings_t;
+
+/* defines for Flags field */
+#define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check the value returned for NumGroups at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
+#define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U8 SamplingInterval; /* 0x08 */
+ U8 WindowLength; /* 0x09 */
+ U16 Reserved1; /* 0x0A */
+ U32 Reserved2; /* 0x0C */
+ U32 Reserved3; /* 0x10 */
+ U8 NumGroups; /* 0x14 */
+ U8 Reserved4; /* 0x15 */
+ U16 Reserved5; /* 0x16 */
+ MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
+ PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX]; /* 0x18 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_7,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
+ Mpi2SasIOUnitPage7_t, MPI2_POINTER pMpi2SasIOUnitPage7_t;
+
+#define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
+
+
+/* SAS IO Unit Page 8 */
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U32 PowerManagementCapabilities;/* 0x0C */
+ U32 Reserved2; /* 0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_8,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
+ Mpi2SasIOUnitPage8_t, MPI2_POINTER pMpi2SasIOUnitPage8_t;
+
+#define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
+
+/* defines for PowerManagementCapabilities field */
+#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800)
+#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200)
+#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002)
+#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001)
@@ -2182,7 +2331,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ * one and check the value returned for NumPhyEvents at runtime.
*/
#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
@@ -2274,7 +2423,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ * one and check the value returned for NumPhyEvents at runtime.
*/
#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
@@ -2385,7 +2534,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumLogEntries at runtime.
*/
#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
#define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
@@ -2435,7 +2584,7 @@
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.ExtPageLength or NumPhys at runtime.
+ * one and check the value returned for NumElements at runtime.
*/
#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)