xhci: replace xhci_writel() with writel()
Function xhci_writel() is used to write a 32bit value in xHC registers residing
in MMIO address space. It takes as first argument a pointer to the xhci_hcd
although it does not use it. xhci_writel() internally simply calls writel().
This creates an illusion that xhci_writel() is an xhci specific function that
has to be called in a context where a pointer to xhci_hcd is available.
Remove xhci_writel() wrapper function and replace its calls with calls to
writel() to make the code more straight-forward.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 70ed7c9..9992fbf 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -342,7 +342,7 @@
}
/* Write 1 to disable the port */
- xhci_writel(xhci, port_status | PORT_PE, addr);
+ writel(port_status | PORT_PE, addr);
port_status = readl(addr);
xhci_dbg(xhci, "disable port, actual port %d status = 0x%x\n",
wIndex, port_status);
@@ -388,7 +388,7 @@
return;
}
/* Change bits are all write 1 to clear */
- xhci_writel(xhci, port_status | status, addr);
+ writel(port_status | status, addr);
port_status = readl(addr);
xhci_dbg(xhci, "clear port %s change, actual port %d status = 0x%x\n",
port_change_bit, wIndex, port_status);
@@ -419,7 +419,7 @@
temp = xhci_port_state_to_neutral(temp);
temp &= ~PORT_PLS_MASK;
temp |= PORT_LINK_STROBE | link_state;
- xhci_writel(xhci, temp, port_array[port_id]);
+ writel(temp, port_array[port_id]);
}
static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci,
@@ -445,7 +445,7 @@
else
temp &= ~PORT_WKOC_E;
- xhci_writel(xhci, temp, port_array[port_id]);
+ writel(temp, port_array[port_id]);
}
/* Test and clear port RWC bit */
@@ -458,7 +458,7 @@
if (temp & port_bit) {
temp = xhci_port_state_to_neutral(temp);
temp |= port_bit;
- xhci_writel(xhci, temp, port_array[port_id]);
+ writel(temp, port_array[port_id]);
}
}
@@ -838,8 +838,7 @@
temp |= PORT_CSC | PORT_PEC | PORT_WRC |
PORT_OCC | PORT_RC | PORT_PLC |
PORT_CEC;
- xhci_writel(xhci, temp | PORT_PE,
- port_array[wIndex]);
+ writel(temp | PORT_PE, port_array[wIndex]);
temp = readl(port_array[wIndex]);
break;
}
@@ -894,8 +893,7 @@
* However, khubd will ignore the roothub events until
* the roothub is registered.
*/
- xhci_writel(xhci, temp | PORT_POWER,
- port_array[wIndex]);
+ writel(temp | PORT_POWER, port_array[wIndex]);
temp = readl(port_array[wIndex]);
xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp);
@@ -910,7 +908,7 @@
break;
case USB_PORT_FEAT_RESET:
temp = (temp | PORT_RESET);
- xhci_writel(xhci, temp, port_array[wIndex]);
+ writel(temp, port_array[wIndex]);
temp = readl(port_array[wIndex]);
xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp);
@@ -925,7 +923,7 @@
break;
case USB_PORT_FEAT_BH_PORT_RESET:
temp |= PORT_WR;
- xhci_writel(xhci, temp, port_array[wIndex]);
+ writel(temp, port_array[wIndex]);
temp = readl(port_array[wIndex]);
break;
@@ -935,7 +933,7 @@
temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U1_TIMEOUT_MASK;
temp |= PORT_U1_TIMEOUT(timeout);
- xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
+ writel(temp, port_array[wIndex] + PORTPMSC);
break;
case USB_PORT_FEAT_U2_TIMEOUT:
if (hcd->speed != HCD_USB3)
@@ -943,7 +941,7 @@
temp = readl(port_array[wIndex] + PORTPMSC);
temp &= ~PORT_U2_TIMEOUT_MASK;
temp |= PORT_U2_TIMEOUT(timeout);
- xhci_writel(xhci, temp, port_array[wIndex] + PORTPMSC);
+ writel(temp, port_array[wIndex] + PORTPMSC);
break;
default:
goto error;
@@ -1007,8 +1005,7 @@
port_array[wIndex], temp);
break;
case USB_PORT_FEAT_POWER:
- xhci_writel(xhci, temp & ~PORT_POWER,
- port_array[wIndex]);
+ writel(temp & ~PORT_POWER, port_array[wIndex]);
spin_unlock_irqrestore(&xhci->lock, flags);
temp = usb_acpi_power_manageable(hcd->self.root_hub,
@@ -1156,7 +1153,7 @@
t1 = xhci_port_state_to_neutral(t1);
if (t1 != t2)
- xhci_writel(xhci, t2, port_array[port_index]);
+ writel(t2, port_array[port_index]);
}
hcd->state = HC_STATE_SUSPENDED;
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
@@ -1188,7 +1185,7 @@
/* delay the irqs */
temp = readl(&xhci->op_regs->command);
temp &= ~CMD_EIE;
- xhci_writel(xhci, temp, &xhci->op_regs->command);
+ writel(temp, &xhci->op_regs->command);
port_index = max_ports;
while (port_index--) {
@@ -1234,7 +1231,7 @@
if (slot_id)
xhci_ring_device(xhci, slot_id);
} else
- xhci_writel(xhci, temp, port_array[port_index]);
+ writel(temp, port_array[port_index]);
}
(void) readl(&xhci->op_regs->command);
@@ -1243,7 +1240,7 @@
/* re-enable irqs */
temp = readl(&xhci->op_regs->command);
temp |= CMD_EIE;
- xhci_writel(xhci, temp, &xhci->op_regs->command);
+ writel(temp, &xhci->op_regs->command);
temp = readl(&xhci->op_regs->command);
spin_unlock_irqrestore(&xhci->lock, flags);