ARM: omap: move platform_data definitions
Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.
This moves such data out of the omap include directories
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: "Benoît Cousson" <b-cousson@ti.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Jean Pihet <j-pihet@ti.com>
Cc: J Keerthy <j-keerthy@ti.com>
Cc: linux-omap@vger.kernel.org
diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h
new file mode 100644
index 0000000..1881412
--- /dev/null
+++ b/include/linux/platform_data/asoc-ti-mcbsp.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/spinlock.h>
+#include <linux/clk.h>
+
+#define MCBSP_CONFIG_TYPE2 0x2
+#define MCBSP_CONFIG_TYPE3 0x3
+#define MCBSP_CONFIG_TYPE4 0x4
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+ void (*request)(unsigned int);
+ void (*free)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+ struct omap_mcbsp_ops *ops;
+ u16 buffer_size;
+ u8 reg_size;
+ u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
+ bool has_ccr; /* Transceiver has configuration control registers */
+ int (*enable_st_clock)(unsigned int, bool);
+ int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src);
+ int (*mux_signal)(struct device *dev, const char *signal, const char *src);
+};
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+ const char *sidetone;
+};
+
+#endif
diff --git a/include/linux/platform_data/dsp-omap.h b/include/linux/platform_data/dsp-omap.h
new file mode 100644
index 0000000..5927709
--- /dev/null
+++ b/include/linux/platform_data/dsp-omap.h
@@ -0,0 +1,34 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+ void (*dsp_set_min_opp) (u8 opp_id);
+ u8 (*dsp_get_opp) (void);
+ void (*cpu_set_freq) (unsigned long f);
+ unsigned long (*cpu_get_freq) (void);
+ unsigned long mpu_speed[6];
+
+ /* functions to write and read PRCM registers */
+ void (*dsp_prm_write)(u32, s16 , u16);
+ u32 (*dsp_prm_read)(s16 , u16);
+ u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+ void (*dsp_cm_write)(u32, s16 , u16);
+ u32 (*dsp_cm_read)(s16 , u16);
+ u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+ void (*set_bootaddr)(u32);
+ void (*set_bootmode)(u8);
+
+ phys_addr_t phys_mempool_base;
+ phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h
new file mode 100644
index 0000000..a6b21ed
--- /dev/null
+++ b/include/linux/platform_data/keypad-omap.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/keypad.h
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg) 0
+#define omap_writew(val, reg) do {} while (0)
+#endif
+#include <linux/input/matrix_keypad.h>
+
+struct omap_kp_platform_data {
+ int rows;
+ int cols;
+ const struct matrix_keymap_data *keymap_data;
+ bool rep;
+ unsigned long delay;
+ bool dbounce;
+ /* specific to OMAP242x*/
+ unsigned int *row_gpios;
+ unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT 14
+#define GROUP_0 (0 << GROUP_SHIFT)
+#define GROUP_1 (1 << GROUP_SHIFT)
+#define GROUP_2 (2 << GROUP_SHIFT)
+#define GROUP_3 (3 << GROUP_SHIFT)
+#define GROUP_MASK GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
+
+
+#endif
+
diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h
new file mode 100644
index 0000000..8e52c65
--- /dev/null
+++ b/include/linux/platform_data/lcd-mipid.h
@@ -0,0 +1,29 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+ MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+ MIPID_TEST_SUCCESS,
+ MIPID_TEST_INVALID,
+ MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+ int nreset_gpio;
+ int data_lines;
+
+ void (*shutdown)(struct mipid_platform_data *pdata);
+ void (*set_bklight_level)(struct mipid_platform_data *pdata,
+ int level);
+ int (*get_bklight_level)(struct mipid_platform_data *pdata);
+ int (*get_bklight_max)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
new file mode 100644
index 0000000..1a68c1e
--- /dev/null
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/gpmc.h>
+#include <linux/mtd/partitions.h>
+
+enum nand_io {
+ NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */
+ NAND_OMAP_POLLED, /* polled mode, without prefetch */
+ NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */
+ NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */
+};
+
+struct omap_nand_platform_data {
+ int cs;
+ struct mtd_partition *parts;
+ struct gpmc_timings *gpmc_t;
+ int nr_parts;
+ bool dev_ready;
+ enum nand_io xfer_type;
+ int devsize;
+ enum omap_ecc ecc_opt;
+ struct gpmc_nand_regs reg;
+};
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE 4
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+ return 0;
+}
+#endif
diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h
new file mode 100644
index 0000000..2858667
--- /dev/null
+++ b/include/linux/platform_data/mtd-onenand-omap2.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
+struct onenand_freq_info {
+ u16 maf_id;
+ u16 dev_id;
+ u16 ver_id;
+};
+
+struct omap_onenand_platform_data {
+ int cs;
+ int gpio_irq;
+ struct mtd_partition *parts;
+ int nr_parts;
+ int (*onenand_setup)(void __iomem *, int *freq_ptr);
+ int (*get_freq)(const struct onenand_freq_info *freq_info,
+ bool *clk_dep);
+ int dma_channel;
+ u8 flags;
+ u8 regulator_can_sleep;
+ u8 skip_initial_unlocking;
+};
+
+#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h
new file mode 100644
index 0000000..b10eac8
--- /dev/null
+++ b/include/linux/platform_data/remoteproc-omap.h
@@ -0,0 +1,57 @@
+/*
+ * Remote Processor - omap-specific bits
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_REMOTEPROC_H
+#define _PLAT_REMOTEPROC_H
+
+struct rproc_ops;
+struct platform_device;
+
+/*
+ * struct omap_rproc_pdata - omap remoteproc's platform data
+ * @name: the remoteproc's name
+ * @oh_name: omap hwmod device
+ * @oh_name_opt: optional, secondary omap hwmod device
+ * @firmware: name of firmware file to load
+ * @mbox_name: name of omap mailbox device to use with this rproc
+ * @ops: start/stop rproc handlers
+ * @device_enable: omap-specific handler for enabling a device
+ * @device_shutdown: omap-specific handler for shutting down a device
+ */
+struct omap_rproc_pdata {
+ const char *name;
+ const char *oh_name;
+ const char *oh_name_opt;
+ const char *firmware;
+ const char *mbox_name;
+ const struct rproc_ops *ops;
+ int (*device_enable) (struct platform_device *pdev);
+ int (*device_shutdown) (struct platform_device *pdev);
+};
+
+#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
+
+void __init omap_rproc_reserve_cma(void);
+
+#else
+
+void __init omap_rproc_reserve_cma(void)
+{
+}
+
+#endif
+
+#endif /* _PLAT_REMOTEPROC_H */
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
new file mode 100644
index 0000000..a357eb2
--- /dev/null
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -0,0 +1,23 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
+struct omap2_mcspi_platform_config {
+ unsigned short num_cs;
+ unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+ unsigned short num_chipselect;
+};
+
+struct omap2_mcspi_device_config {
+ unsigned turbo_mode:1;
+};
+
+#endif
diff --git a/include/linux/platform_data/voltage-omap.h b/include/linux/platform_data/voltage-omap.h
new file mode 100644
index 0000000..5be4d5d
--- /dev/null
+++ b/include/linux/platform_data/voltage-omap.h
@@ -0,0 +1,39 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Copyright (C) 2011, Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
+#define __ARCH_ARM_OMAP_VOLTAGE_H
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
+struct voltagedomain;
+
+struct voltagedomain *voltdm_lookup(const char *name);
+int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
+unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
+#endif
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index 3101e62..4a496eb 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -23,7 +23,7 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
-#include <plat/voltage.h>
+#include <linux/platform_data/voltage-omap.h>
/*
* Different Smartreflex IPs version. The v1 is the 65nm version used in