ath: Convert ath_print to ath_dbg
Remove ath/debug.h and the includes of these files.
Coalesce long formats.
Correct a few misspellings and missing "\n"s from these logging messages.
Remove unnecessary trailing space before a newline.
Remove ARRAY_SIZE casts, use printf type %zu
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index c477be0..70f3fa6 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -165,7 +165,7 @@
u32 nbuf = 0;
if (list_empty(&sc->rx.rxbuf)) {
- ath_print(common, ATH_DBG_QUEUE, "No free rx buf available\n");
+ ath_dbg(common, ATH_DBG_QUEUE, "No free rx buf available\n");
return;
}
@@ -327,8 +327,8 @@
common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
min(common->cachelsz, (u16)64));
- ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
- common->cachelsz, common->rx_bufsize);
+ ath_dbg(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+ common->cachelsz, common->rx_bufsize);
/* Initialize rx descriptors */
@@ -590,9 +590,8 @@
if (sc->ps_flags & PS_BEACON_SYNC) {
sc->ps_flags &= ~PS_BEACON_SYNC;
- ath_print(common, ATH_DBG_PS,
- "Reconfigure Beacon timers based on "
- "timestamp from the AP\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "Reconfigure Beacon timers based on timestamp from the AP\n");
ath_beacon_config(sc, NULL);
}
@@ -604,8 +603,8 @@
* a backup trigger for returning into NETWORK SLEEP state,
* so we are waiting for it as well.
*/
- ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
- "buffered broadcast/multicast frame(s)\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "Received DTIM beacon indicating buffered broadcast/multicast frame(s)\n");
sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
return;
}
@@ -617,8 +616,8 @@
* been delivered.
*/
sc->ps_flags &= ~PS_WAIT_FOR_CAB;
- ath_print(common, ATH_DBG_PS,
- "PS wait for CAB frames timed out\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "PS wait for CAB frames timed out\n");
}
}
@@ -643,15 +642,14 @@
* point.
*/
sc->ps_flags &= ~(PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON);
- ath_print(common, ATH_DBG_PS,
- "All PS CAB frames received, back to sleep\n");
+ ath_dbg(common, ATH_DBG_PS,
+ "All PS CAB frames received, back to sleep\n");
} else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
!is_multicast_ether_addr(hdr->addr1) &&
!ieee80211_has_morefrags(hdr->frame_control)) {
sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
- ath_print(common, ATH_DBG_PS,
- "Going back to sleep after having received "
- "PS-Poll data (0x%lx)\n",
+ ath_dbg(common, ATH_DBG_PS,
+ "Going back to sleep after having received PS-Poll data (0x%lx)\n",
sc->ps_flags & (PS_WAIT_FOR_BEACON |
PS_WAIT_FOR_CAB |
PS_WAIT_FOR_PSPOLL_DATA |
@@ -953,8 +951,9 @@
* No valid hardware bitrate found -- we should not get here
* because hardware has already validated this frame as OK.
*/
- ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
- "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
+ ath_dbg(common, ATH_DBG_XMIT,
+ "unsupported hw bitrate detected 0x%02x using 1 Mbit\n",
+ rx_stats->rs_rate);
return -EINVAL;
}