Merge tag 'fixes-for-v3.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Pull USB gadget fixes from Felipe:
usb: musb: fix for v3.12-rc
A single patch fixing musb start when using peripheral
only configurations. It turns out that musb_start() needs
to be called for peripheral too, so that function is
factored out of musb_virthub.c and into musb_core.c since
it's shared for both roles.
Signed-of-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 18e877f..cd70cc8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -922,6 +922,52 @@
}
/*
+ * Program the HDRC to start (enable interrupts, dma, etc.).
+ */
+void musb_start(struct musb *musb)
+{
+ void __iomem *regs = musb->mregs;
+ u8 devctl = musb_readb(regs, MUSB_DEVCTL);
+
+ dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
+
+ /* Set INT enable registers, enable interrupts */
+ musb->intrtxe = musb->epmask;
+ musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
+ musb->intrrxe = musb->epmask & 0xfffe;
+ musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
+ musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
+
+ musb_writeb(regs, MUSB_TESTMODE, 0);
+
+ /* put into basic highspeed mode and start session */
+ musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+ | MUSB_POWER_HSENAB
+ /* ENSUSPEND wedges tusb */
+ /* | MUSB_POWER_ENSUSPEND */
+ );
+
+ musb->is_active = 0;
+ devctl = musb_readb(regs, MUSB_DEVCTL);
+ devctl &= ~MUSB_DEVCTL_SESSION;
+
+ /* session started after:
+ * (a) ID-grounded irq, host mode;
+ * (b) vbus present/connect IRQ, peripheral mode;
+ * (c) peripheral initiates, using SRP
+ */
+ if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+ (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
+ musb->is_active = 1;
+ } else {
+ devctl |= MUSB_DEVCTL_SESSION;
+ }
+
+ musb_platform_enable(musb);
+ musb_writeb(regs, MUSB_DEVCTL, devctl);
+}
+
+/*
* Make the HDRC stop (disable interrupts, etc.);
* reversible by musb_start
* called on gadget driver unregister
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 65f3917..1c5bf75 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -503,6 +503,7 @@
extern const char musb_driver_name[];
extern void musb_stop(struct musb *musb);
+extern void musb_start(struct musb *musb);
extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
extern void musb_read_fifo(struct musb_hw_ep *ep, u16 len, u8 *dst);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index b19ed21..07bf4df 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1858,6 +1858,8 @@
musb->xceiv->state = OTG_STATE_B_IDLE;
spin_unlock_irqrestore(&musb->lock, flags);
+ musb_start(musb);
+
/* REVISIT: funcall to other code, which also
* handles power budgeting ... this way also
* ensures HdrcStart is indirectly called.
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index a523950..d1d6b83 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -44,52 +44,6 @@
#include "musb_core.h"
-/*
-* Program the HDRC to start (enable interrupts, dma, etc.).
-*/
-static void musb_start(struct musb *musb)
-{
- void __iomem *regs = musb->mregs;
- u8 devctl = musb_readb(regs, MUSB_DEVCTL);
-
- dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
-
- /* Set INT enable registers, enable interrupts */
- musb->intrtxe = musb->epmask;
- musb_writew(regs, MUSB_INTRTXE, musb->intrtxe);
- musb->intrrxe = musb->epmask & 0xfffe;
- musb_writew(regs, MUSB_INTRRXE, musb->intrrxe);
- musb_writeb(regs, MUSB_INTRUSBE, 0xf7);
-
- musb_writeb(regs, MUSB_TESTMODE, 0);
-
- /* put into basic highspeed mode and start session */
- musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
- | MUSB_POWER_HSENAB
- /* ENSUSPEND wedges tusb */
- /* | MUSB_POWER_ENSUSPEND */
- );
-
- musb->is_active = 0;
- devctl = musb_readb(regs, MUSB_DEVCTL);
- devctl &= ~MUSB_DEVCTL_SESSION;
-
- /* session started after:
- * (a) ID-grounded irq, host mode;
- * (b) vbus present/connect IRQ, peripheral mode;
- * (c) peripheral initiates, using SRP
- */
- if (musb->port_mode != MUSB_PORT_MODE_HOST &&
- (devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
- musb->is_active = 1;
- } else {
- devctl |= MUSB_DEVCTL_SESSION;
- }
-
- musb_platform_enable(musb);
- musb_writeb(regs, MUSB_DEVCTL, devctl);
-}
-
static void musb_port_suspend(struct musb *musb, bool do_suspend)
{
struct usb_otg *otg = musb->xceiv->otg;