Merge 4.4-rc5 into usb-next as we want those fixes here for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 3a4abfc..0bd731c 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -134,19 +134,21 @@
enabled for the device. Developer can write y/Y/1 or n/N/0 to
the file to enable/disable the feature.
-What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm
-Date: June 2015
+What: /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u1
+ /sys/bus/usb/devices/.../power/usb3_hardware_lpm_u2
+Date: November 2015
Contact: Kevin Strasser <kevin.strasser@linux.intel.com>
+ Lu Baolu <baolu.lu@linux.intel.com>
Description:
If CONFIG_PM is set and a USB 3.0 lpm-capable device is plugged
in to a xHCI host which supports link PM, it will check if U1
and U2 exit latencies have been set in the BOS descriptor; if
- the check is is passed and the host supports USB3 hardware LPM,
+ the check is passed and the host supports USB3 hardware LPM,
USB3 hardware LPM will be enabled for the device and the USB
- device directory will contain a file named
- power/usb3_hardware_lpm. The file holds a string value (enable
- or disable) indicating whether or not USB3 hardware LPM is
- enabled for the device.
+ device directory will contain two files named
+ power/usb3_hardware_lpm_u1 and power/usb3_hardware_lpm_u2. These
+ files hold a string value (enable or disable) indicating whether
+ or not USB3 hardware LPM U1 or U2 is enabled for the device.
What: /sys/bus/usb/devices/.../removable
Date: February 2012
@@ -187,6 +189,17 @@
The file will read "hotplug", "wired" and "not used" if the
information is available, and "unknown" otherwise.
+What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
+Date: November 2015
+Contact: Lu Baolu <baolu.lu@linux.intel.com>
+Description:
+ Some USB3.0 devices are not friendly to USB3 LPM. usb3_lpm_permit
+ attribute allows enabling/disabling usb3 lpm of a port. It takes
+ effect both before and after a usb device is enumerated. Supported
+ values are "0" if both u1 and u2 are NOT permitted, "u1" if only u1
+ is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and
+ u2 are permitted.
+
What: /sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
Date: May 2013
Contact: Mathias Nyman <mathias.nyman@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
new file mode 100644
index 0000000..b3a7ffa
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
@@ -0,0 +1,51 @@
+MT8173 xHCI
+
+The device node for Mediatek SOC USB3.0 host controller
+
+Required properties:
+ - compatible : should contain "mediatek,mt8173-xhci"
+ - reg : specifies physical base address and size of the registers,
+ the first one for MAC, the second for IPPC
+ - interrupts : interrupt used by the controller
+ - power-domains : a phandle to USB power domain node to control USB's
+ mtcmos
+ - vusb33-supply : regulator of USB avdd3.3v
+
+ - clocks : a list of phandle + clock-specifier pairs, one for each
+ entry in clock-names
+ - clock-names : must contain
+ "sys_ck": for clock of xHCI MAC
+ "wakeup_deb_p0": for USB wakeup debounce clock of port0
+ "wakeup_deb_p1": for USB wakeup debounce clock of port1
+
+ - phys : a list of phandle + phy specifier pairs
+
+Optional properties:
+ - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
+ mode;
+ - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
+ control register, it depends on "mediatek,wakeup-src".
+ - vbus-supply : reference to the VBUS regulator;
+ - usb3-lpm-capable : supports USB3.0 LPM
+
+Example:
+usb30: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>,
+ <0 0x11280700 0 0x0100>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_ck",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&phy_port0 PHY_TYPE_USB3>,
+ <&phy_port1 PHY_TYPE_USB2>;
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ usb3-lpm-capable;
+ mediatek,syscon-wakeup = <&pericfg>;
+ mediatek,wakeup-src = <1>;
+};
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 86f67f0..0825732 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -3,8 +3,8 @@
Required properties:
- compatible: should be one of "generic-xhci",
"marvell,armada-375-xhci", "marvell,armada-380-xhci",
- "renesas,xhci-r8a7790", "renesas,xhci-r8a7791" (deprecated:
- "xhci-platform").
+ "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7793",
+ "renesas,xhci-r8a7795" (deprecated: "xhci-platform").
- reg: should contain address and length of the standard XHCI
register set for the device.
- interrupts: one XHCI interrupt should be described here.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 742f69d..fd333fb 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2575,8 +2575,6 @@
notsc [BUGS=X86-32] Disable Time Stamp Counter
- nousb [USB] Disable the USB subsystem
-
nowatchdog [KNL] Disable both lockup detectors, i.e.
soft-lockup and NMI watchdog (hard-lockup).
@@ -3874,6 +3872,10 @@
usbcore.usbfs_snoop=
[USB] Set to log all usbfs traffic (default 0 = off).
+ usbcore.usbfs_snoop_max=
+ [USB] Maximum number of bytes to snoop in each URB
+ (default = 65536).
+
usbcore.blinkenlights=
[USB] Set to cycle leds on hubs (default 0 = off).
@@ -3894,6 +3896,8 @@
USB_REQ_GET_DESCRIPTOR request in milliseconds
(default 5000 = 5.0 seconds).
+ usbcore.nousb [USB] Disable the USB subsystem
+
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index 4a15c90..0a94ffe 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -537,17 +537,18 @@
can write y/Y/1 or n/N/0 to the file to enable/disable
USB2 hardware LPM manually. This is for test purpose mainly.
- power/usb3_hardware_lpm
+ power/usb3_hardware_lpm_u1
+ power/usb3_hardware_lpm_u2
When a USB 3.0 lpm-capable device is plugged in to a
xHCI host which supports link PM, it will check if U1
and U2 exit latencies have been set in the BOS
descriptor; if the check is is passed and the host
supports USB3 hardware LPM, USB3 hardware LPM will be
- enabled for the device and this file will be created.
- The file holds a string value (enable or disable)
- indicating whether or not USB3 hardware LPM is
- enabled for the device.
+ enabled for the device and these files will be created.
+ The files hold a string value (enable or disable)
+ indicating whether or not USB3 hardware LPM U1 or U2
+ is enabled for the device.
USB Port Power Control
----------------------
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 811cb76..9b1482a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&i2c1 {
@@ -408,3 +418,9 @@
&uart0 {
status = "okay";
};
+
+&usb30 {
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ mediatek,wakeup-src = <1>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 4dd5f93..c1fd275 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,7 @@
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8173-power.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
#include "mt8173-pinfunc.h"
@@ -510,6 +511,47 @@
status = "disabled";
};
+ usb30: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>,
+ <0 0x11280700 0 0x0100>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_ck",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&phy_port0 PHY_TYPE_USB3>,
+ <&phy_port1 PHY_TYPE_USB2>;
+ mediatek,syscon-wakeup = <&pericfg>;
+ status = "okay";
+ };
+
+ u3phy: usb-phy@11290000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11290000 0 0x800>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "u3phya_ref";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "okay";
+
+ phy_port0: port@11290800 {
+ reg = <0 0x11290800 0 0x800>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ phy_port1: port@11291000 {
+ reg = <0 0x11291000 0 0x800>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
mmsys: clock-controller@14000000 {
compatible = "mediatek,mt8173-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index d79ecc0..3889809 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -25,7 +25,8 @@
case CI_HDRC_CONTROLLER_RESET_EVENT:
dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
writel(0, USB_AHBBURST);
- writel(0, USB_AHBMODE);
+ /* use AHB transactor, allow posted data writes */
+ writel(0x8, USB_AHBMODE);
usb_phy_init(ci->usb_phy);
break;
case CI_HDRC_CONTROLLER_STOPPED_EVENT:
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 391a122..b292b45 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -349,14 +349,13 @@
if (node == NULL)
return -ENOMEM;
- node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
+ node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC,
&node->dma);
if (node->ptr == NULL) {
kfree(node);
return -ENOMEM;
}
- memset(node->ptr, 0, sizeof(struct ci_hw_td));
node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 38ae877c..e9f0de3 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -100,6 +100,11 @@
module_param(usbfs_snoop, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic");
+static unsigned usbfs_snoop_max = 65536;
+module_param(usbfs_snoop_max, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(usbfs_snoop_max,
+ "maximum number of bytes to print while snooping");
+
#define snoop(dev, format, arg...) \
do { \
if (usbfs_snoop) \
@@ -392,6 +397,7 @@
ep, t, d, length, timeout_or_status);
}
+ data_len = min(data_len, usbfs_snoop_max);
if (data && data_len > 0) {
print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE, 32, 1,
data, data_len, 1);
@@ -402,7 +408,8 @@
{
int i, size;
- if (!usbfs_snoop)
+ len = min(len, usbfs_snoop_max);
+ if (!usbfs_snoop || len == 0)
return;
if (urb->num_sgs == 0) {
@@ -1709,8 +1716,12 @@
static int proc_reapurb(struct usb_dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
+
if (as) {
- int retval = processcompl(as, (void __user * __user *)arg);
+ int retval;
+
+ snoop(&ps->dev->dev, "reap %p\n", as->userurb);
+ retval = processcompl(as, (void __user * __user *)arg);
free_async(as);
return retval;
}
@@ -1726,6 +1737,7 @@
as = async_getcompleted(ps);
if (as) {
+ snoop(&ps->dev->dev, "reap %p\n", as->userurb);
retval = processcompl(as, (void __user * __user *)arg);
free_async(as);
} else {
@@ -1852,8 +1864,12 @@
static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
+
if (as) {
- int retval = processcompl_compat(as, (void __user * __user *)arg);
+ int retval;
+
+ snoop(&ps->dev->dev, "reap %p\n", as->userurb);
+ retval = processcompl_compat(as, (void __user * __user *)arg);
free_async(as);
return retval;
}
@@ -1869,6 +1885,7 @@
as = async_getcompleted(ps);
if (as) {
+ snoop(&ps->dev->dev, "reap %p\n", as->userurb);
retval = processcompl_compat(as, (void __user * __user *)arg);
free_async(as);
} else {
@@ -2273,7 +2290,7 @@
#endif
case USBDEVFS_DISCARDURB:
- snoop(&dev->dev, "%s: DISCARDURB\n", __func__);
+ snoop(&dev->dev, "%s: DISCARDURB %p\n", __func__, p);
ret = proc_unlinkurb(ps, p);
break;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 1c102d6..df0e3b9 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -3000,7 +3000,7 @@
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
-struct usb_mon_operations *mon_ops;
+const struct usb_mon_operations *mon_ops;
/*
* The registration is unlocked.
@@ -3010,7 +3010,7 @@
* symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
*/
-int usb_mon_register (struct usb_mon_operations *ops)
+int usb_mon_register(const struct usb_mon_operations *ops)
{
if (mon_ops)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a5cc032..5e32ce7 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3308,7 +3308,7 @@
/*
* There are some SS USB devices which take longer time for link training.
* XHCI specs 4.19.4 says that when Link training is successful, port
- * sets CSC bit to 1. So if SW reads port status before successful link
+ * sets CCS bit to 1. So if SW reads port status before successful link
* training, then it will not find device to be present.
* USB Analyzer log with such buggy devices show that in some cases
* device switch on the RX termination after long delay of host enabling
@@ -3319,14 +3319,17 @@
* routine implements a 2000 ms timeout for link training. If in a case
* link trains before timeout, loop will exit earlier.
*
+ * There are also some 2.0 hard drive based devices and 3.0 thumb
+ * drives that, when plugged into a 2.0 only port, take a long
+ * time to set CCS after VBUS enable.
+ *
* FIXME: If a device was connected before suspend, but was removed
* while system was asleep, then the loop in the following routine will
* only exit at timeout.
*
- * This routine should only be called when persist is enabled for a SS
- * device.
+ * This routine should only be called when persist is enabled.
*/
-static int wait_for_ss_port_enable(struct usb_device *udev,
+static int wait_for_connected(struct usb_device *udev,
struct usb_hub *hub, int *port1,
u16 *portchange, u16 *portstatus)
{
@@ -3339,6 +3342,7 @@
delay_ms += 20;
status = hub_port_status(hub, *port1, portstatus, portchange);
}
+ dev_dbg(&udev->dev, "Waited %dms for CONNECT\n", delay_ms);
return status;
}
@@ -3438,8 +3442,8 @@
}
}
- if (udev->persist_enabled && hub_is_superspeed(hub->hdev))
- status = wait_for_ss_port_enable(udev, hub, &port1, &portchange,
+ if (udev->persist_enabled)
+ status = wait_for_connected(udev, hub, &port1, &portchange,
&portstatus);
status = check_port_resume_type(udev,
@@ -3879,17 +3883,30 @@
return;
}
- if (usb_set_lpm_timeout(udev, state, timeout))
+ if (usb_set_lpm_timeout(udev, state, timeout)) {
/* If we can't set the parent hub U1/U2 timeout,
* device-initiated LPM won't be allowed either, so let the xHCI
* host know that this link state won't be enabled.
*/
hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state);
+ } else {
+ /* Only a configured device will accept the Set Feature
+ * U1/U2_ENABLE
+ */
+ if (udev->actconfig)
+ usb_set_device_initiated_lpm(udev, state, true);
- /* Only a configured device will accept the Set Feature U1/U2_ENABLE */
- else if (udev->actconfig)
- usb_set_device_initiated_lpm(udev, state, true);
-
+ /* As soon as usb_set_lpm_timeout(timeout) returns 0, the
+ * hub-initiated LPM is enabled. Thus, LPM is enabled no
+ * matter the result of usb_set_device_initiated_lpm().
+ * The only difference is whether device is able to initiate
+ * LPM.
+ */
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 1;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 1;
+ }
}
/*
@@ -3929,6 +3946,18 @@
dev_warn(&udev->dev, "Could not disable xHCI %s timeout, "
"bus schedule bandwidth may be impacted.\n",
usb3_lpm_names[state]);
+
+ /* As soon as usb_set_lpm_timeout(0) return 0, hub initiated LPM
+ * is disabled. Hub will disallows link to enter U1/U2 as well,
+ * even device is initiating LPM. Hence LPM is disabled if hub LPM
+ * timeout set to 0, no matter device-initiated LPM is disabled or
+ * not.
+ */
+ if (state == USB3_LPM_U1)
+ udev->usb3_lpm_u1_enabled = 0;
+ else if (state == USB3_LPM_U2)
+ udev->usb3_lpm_u2_enabled = 0;
+
return 0;
}
@@ -3963,8 +3992,6 @@
if (usb_disable_link_state(hcd, udev, USB3_LPM_U2))
goto enable_lpm;
- udev->usb3_lpm_enabled = 0;
-
return 0;
enable_lpm:
@@ -4001,6 +4028,8 @@
void usb_enable_lpm(struct usb_device *udev)
{
struct usb_hcd *hcd;
+ struct usb_hub *hub;
+ struct usb_port *port_dev;
if (!udev || !udev->parent ||
udev->speed != USB_SPEED_SUPER ||
@@ -4020,10 +4049,17 @@
if (udev->lpm_disable_count > 0)
return;
- usb_enable_link_state(hcd, udev, USB3_LPM_U1);
- usb_enable_link_state(hcd, udev, USB3_LPM_U2);
+ hub = usb_hub_to_struct_hub(udev->parent);
+ if (!hub)
+ return;
- udev->usb3_lpm_enabled = 1;
+ port_dev = hub->ports[udev->portnum - 1];
+
+ if (port_dev->usb3_lpm_u1_permit)
+ usb_enable_link_state(hcd, udev, USB3_LPM_U1);
+
+ if (port_dev->usb3_lpm_u2_permit)
+ usb_enable_link_state(hcd, udev, USB3_LPM_U2);
}
EXPORT_SYMBOL_GPL(usb_enable_lpm);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 688817f..45d070d 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -92,6 +92,8 @@
* @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
* @portnum: port index num based one
* @is_superspeed cache super-speed status
+ * @usb3_lpm_u1_permit: whether USB3 U1 LPM is permitted.
+ * @usb3_lpm_u2_permit: whether USB3 U2 LPM is permitted.
*/
struct usb_port {
struct usb_device *child;
@@ -104,6 +106,8 @@
struct mutex status_lock;
u8 portnum;
unsigned int is_superspeed:1;
+ unsigned int usb3_lpm_u1_permit:1;
+ unsigned int usb3_lpm_u2_permit:1;
};
#define to_usb_port(_dev) \
@@ -155,4 +159,3 @@
{
return hub_port_debounce(hub, port1, false);
}
-
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index 5487fe308..460c855 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -50,6 +50,72 @@
}
static DEVICE_ATTR_RO(connect_type);
+static ssize_t usb3_lpm_permit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_port *port_dev = to_usb_port(dev);
+ const char *p;
+
+ if (port_dev->usb3_lpm_u1_permit) {
+ if (port_dev->usb3_lpm_u2_permit)
+ p = "u1_u2";
+ else
+ p = "u1";
+ } else {
+ if (port_dev->usb3_lpm_u2_permit)
+ p = "u2";
+ else
+ p = "0";
+ }
+
+ return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t usb3_lpm_permit_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_port *port_dev = to_usb_port(dev);
+ struct usb_device *udev = port_dev->child;
+ struct usb_hcd *hcd;
+
+ if (!strncmp(buf, "u1_u2", 5)) {
+ port_dev->usb3_lpm_u1_permit = 1;
+ port_dev->usb3_lpm_u2_permit = 1;
+
+ } else if (!strncmp(buf, "u1", 2)) {
+ port_dev->usb3_lpm_u1_permit = 1;
+ port_dev->usb3_lpm_u2_permit = 0;
+
+ } else if (!strncmp(buf, "u2", 2)) {
+ port_dev->usb3_lpm_u1_permit = 0;
+ port_dev->usb3_lpm_u2_permit = 1;
+
+ } else if (!strncmp(buf, "0", 1)) {
+ port_dev->usb3_lpm_u1_permit = 0;
+ port_dev->usb3_lpm_u2_permit = 0;
+ } else
+ return -EINVAL;
+
+ /* If device is connected to the port, disable or enable lpm
+ * to make new u1 u2 setting take effect immediately.
+ */
+ if (udev) {
+ hcd = bus_to_hcd(udev->bus);
+ if (!hcd)
+ return -EINVAL;
+ usb_lock_device(udev);
+ mutex_lock(hcd->bandwidth_mutex);
+ if (!usb_disable_lpm(udev))
+ usb_enable_lpm(udev);
+ mutex_unlock(hcd->bandwidth_mutex);
+ usb_unlock_device(udev);
+ }
+
+ return count;
+}
+static DEVICE_ATTR_RW(usb3_lpm_permit);
+
static struct attribute *port_dev_attrs[] = {
&dev_attr_connect_type.attr,
NULL,
@@ -64,6 +130,21 @@
NULL,
};
+static struct attribute *port_dev_usb3_attrs[] = {
+ &dev_attr_usb3_lpm_permit.attr,
+ NULL,
+};
+
+static struct attribute_group port_dev_usb3_attr_grp = {
+ .attrs = port_dev_usb3_attrs,
+};
+
+static const struct attribute_group *port_dev_usb3_group[] = {
+ &port_dev_attr_grp,
+ &port_dev_usb3_attr_grp,
+ NULL,
+};
+
static void usb_port_device_release(struct device *dev)
{
struct usb_port *port_dev = to_usb_port(dev);
@@ -401,6 +482,7 @@
int usb_hub_create_port_device(struct usb_hub *hub, int port1)
{
struct usb_port *port_dev;
+ struct usb_device *hdev = hub->hdev;
int retval;
port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL);
@@ -417,7 +499,12 @@
port_dev->portnum = port1;
set_bit(port1, hub->power_bits);
port_dev->dev.parent = hub->intfdev;
- port_dev->dev.groups = port_dev_group;
+ if (hub_is_superspeed(hdev)) {
+ port_dev->usb3_lpm_u1_permit = 1;
+ port_dev->usb3_lpm_u2_permit = 1;
+ port_dev->dev.groups = port_dev_usb3_group;
+ } else
+ port_dev->dev.groups = port_dev_group;
port_dev->dev.type = &usb_port_device_type;
port_dev->dev.driver = &usb_port_driver;
if (hub_is_superspeed(hub->hdev))
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index d9ec2de6c..65b6e6b 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -531,7 +531,7 @@
}
static DEVICE_ATTR_RW(usb2_lpm_besl);
-static ssize_t usb3_hardware_lpm_show(struct device *dev,
+static ssize_t usb3_hardware_lpm_u1_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usb_device *udev = to_usb_device(dev);
@@ -539,7 +539,7 @@
usb_lock_device(udev);
- if (udev->usb3_lpm_enabled)
+ if (udev->usb3_lpm_u1_enabled)
p = "enabled";
else
p = "disabled";
@@ -548,7 +548,26 @@
return sprintf(buf, "%s\n", p);
}
-static DEVICE_ATTR_RO(usb3_hardware_lpm);
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u1);
+
+static ssize_t usb3_hardware_lpm_u2_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ const char *p;
+
+ usb_lock_device(udev);
+
+ if (udev->usb3_lpm_u2_enabled)
+ p = "enabled";
+ else
+ p = "disabled";
+
+ usb_unlock_device(udev);
+
+ return sprintf(buf, "%s\n", p);
+}
+static DEVICE_ATTR_RO(usb3_hardware_lpm_u2);
static struct attribute *usb2_hardware_lpm_attr[] = {
&dev_attr_usb2_hardware_lpm.attr,
@@ -562,7 +581,8 @@
};
static struct attribute *usb3_hardware_lpm_attr[] = {
- &dev_attr_usb3_hardware_lpm.attr,
+ &dev_attr_usb3_hardware_lpm_u1.attr,
+ &dev_attr_usb3_hardware_lpm_u2.attr,
NULL,
};
static struct attribute_group usb3_hardware_lpm_attr_group = {
@@ -592,7 +612,8 @@
if (udev->usb2_hw_lpm_capable == 1)
rc = sysfs_merge_group(&dev->kobj,
&usb2_hardware_lpm_attr_group);
- if (udev->lpm_capable == 1)
+ if (udev->speed == USB_SPEED_SUPER &&
+ udev->lpm_capable == 1)
rc = sysfs_merge_group(&dev->kobj,
&usb3_hardware_lpm_attr_group);
}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index f8bbd0b..77e4c9b 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -49,12 +49,7 @@
static bool nousb; /* Disable USB when built into kernel image */
-/* To disable USB, kernel command line is 'nousb' not 'usbcore.nousb' */
-#ifdef MODULE
module_param(nousb, bool, 0444);
-#else
-core_param(nousb, nousb, bool, 0444);
-#endif
/*
* for external read access to <nousb>
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index b9429bc..39b7136 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -253,13 +253,12 @@
dma_addr_t paddr;
struct gr_dma_desc *dma_desc;
- dma_desc = dma_pool_alloc(ep->dev->desc_pool, gfp_flags, &paddr);
+ dma_desc = dma_pool_zalloc(ep->dev->desc_pool, gfp_flags, &paddr);
if (!dma_desc) {
dev_err(ep->dev->dev, "Could not allocate from DMA pool\n");
return NULL;
}
- memset(dma_desc, 0, sizeof(*dma_desc));
dma_desc->paddr = paddr;
return dma_desc;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3bb0887..daa563f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -41,6 +41,15 @@
If unsure, say N.
+config USB_XHCI_MTK
+ tristate "xHCI support for Mediatek MT65xx"
+ select MFD_SYSCON
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ ---help---
+ Say 'Y' to enable the support for the xHCI host controller
+ found in Mediatek MT65xx SoCs.
+ If unsure, say N.
+
config USB_XHCI_MVEBU
tristate "xHCI support for Marvell Armada 375/38x"
select USB_XHCI_PLATFORM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index e7558ab..65a06b4 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -13,6 +13,9 @@
xhci-hcd-y := xhci.o xhci-mem.o
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
xhci-hcd-y += xhci-trace.o
+ifneq ($(CONFIG_USB_XHCI_MTK), )
+ xhci-hcd-y += xhci-mtk-sch.o
+endif
xhci-plat-hcd-y := xhci-plat.o
ifneq ($(CONFIG_USB_XHCI_MVEBU), )
@@ -64,6 +67,7 @@
obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
diff --git a/drivers/usb/host/bcma-hcd.c b/drivers/usb/host/bcma-hcd.c
index 5398e3d..291aaa2 100644
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -21,6 +21,7 @@
*/
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/slab.h>
@@ -36,6 +37,7 @@
struct bcma_hcd_device {
struct platform_device *ehci_dev;
struct platform_device *ohci_dev;
+ struct gpio_desc *gpio_desc;
};
/* Wait for bitmask in a register to get set or cleared.
@@ -228,19 +230,12 @@
static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
{
- int gpio;
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
- if (!gpio_is_valid(gpio))
+ if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
return;
- if (val) {
- gpio_request(gpio, "bcma-hcd-gpio");
- gpio_set_value(gpio, 1);
- } else {
- gpio_set_value(gpio, 0);
- gpio_free(gpio);
- }
+ gpiod_set_value(usb_dev->gpio_desc, val);
}
static const struct usb_ehci_pdata ehci_pdata = {
@@ -314,7 +309,11 @@
if (!usb_dev)
return -ENOMEM;
- bcma_hci_platform_power_gpio(dev, true);
+ if (dev->dev.of_node)
+ usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
+ &dev->dev.of_node->fwnode);
+ if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
+ gpiod_direction_output(usb_dev->gpio_desc, 1);
switch (dev->id.id) {
case BCMA_CORE_NS_USB20:
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index b26b96e..b7d623f 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -436,7 +436,8 @@
scratch = hc32_to_cpup(ehci, &hw->hw_info1);
hw_curr = (mark == '*') ? hc32_to_cpup(ehci, &hw->hw_current) : 0;
temp = scnprintf (next, size,
- "qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)",
+ "qh/%p dev%d %cs ep%d %08x %08x (%08x%c %s nak%d)"
+ " [cur %08x next %08x buf[0] %08x]",
qh, scratch & 0x007f,
speed_char (scratch),
(scratch >> 8) & 0x000f,
@@ -444,7 +445,10 @@
hc32_to_cpup(ehci, &hw->hw_token), mark,
(cpu_to_hc32(ehci, QTD_TOGGLE) & hw->hw_token)
? "data1" : "data0",
- (hc32_to_cpup(ehci, &hw->hw_alt_next) >> 1) & 0x0f);
+ (hc32_to_cpup(ehci, &hw->hw_alt_next) >> 1) & 0x0f,
+ hc32_to_cpup(ehci, &hw->hw_current),
+ hc32_to_cpup(ehci, &hw->hw_qtd_next),
+ hc32_to_cpup(ehci, &hw->hw_buf[0]));
size -= temp;
next += temp;
@@ -464,7 +468,8 @@
mark = '/';
}
temp = snprintf (next, size,
- "\n\t%p%c%s len=%d %08x urb %p",
+ "\n\t%p%c%s len=%d %08x urb %p"
+ " [td %08x buf[0] %08x]",
td, mark, ({ char *tmp;
switch ((scratch>>8)&0x03) {
case 0: tmp = "out"; break;
@@ -474,7 +479,9 @@
} tmp;}),
(scratch >> 16) & 0x7fff,
scratch,
- td->urb);
+ td->urb,
+ (u32) td->qtd_dma,
+ hc32_to_cpup(ehci, &td->hw_buf[0]));
if (size < temp)
temp = size;
size -= temp;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 48c92bf..14178bb 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -98,7 +98,7 @@
MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
/* for flakey hardware, ignore overcurrent indicators */
-static bool ignore_oc = 0;
+static bool ignore_oc;
module_param (ignore_oc, bool, S_IRUGO);
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index b6205fa..4de4301 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -128,21 +128,13 @@
ehci->dummy = NULL;
/* DMA consistent memory and pools */
- if (ehci->qtd_pool)
- dma_pool_destroy (ehci->qtd_pool);
+ dma_pool_destroy(ehci->qtd_pool);
ehci->qtd_pool = NULL;
-
- if (ehci->qh_pool) {
- dma_pool_destroy (ehci->qh_pool);
- ehci->qh_pool = NULL;
- }
-
- if (ehci->itd_pool)
- dma_pool_destroy (ehci->itd_pool);
+ dma_pool_destroy(ehci->qh_pool);
+ ehci->qh_pool = NULL;
+ dma_pool_destroy(ehci->itd_pool);
ehci->itd_pool = NULL;
-
- if (ehci->sitd_pool)
- dma_pool_destroy (ehci->sitd_pool);
+ dma_pool_destroy(ehci->sitd_pool);
ehci->sitd_pool = NULL;
if (ehci->periodic)
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index c4f84c8..c23e285 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -57,8 +57,8 @@
/* bursts of unspecified length. */
writel(0, USB_AHBBURST);
- /* Use the AHB transactor */
- writel(0, USB_AHBMODE);
+ /* Use the AHB transactor, allow posted data writes */
+ writel(0x8, USB_AHBMODE);
/* Disable streaming mode and select host mode */
writel(0x13, USB_USBMODE);
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 54f5332..aad0777 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -132,10 +132,14 @@
* qtd is updated in qh_completions(). Update the QH
* overlay here.
*/
- if (qh->hw->hw_token & ACTIVE_BIT(ehci))
+ if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
qh->hw->hw_qtd_next = qtd->hw_next;
- else
+ if (qh->should_be_inactive)
+ ehci_warn(ehci, "qh %p should be inactive!\n", qh);
+ } else {
qh_update(ehci, qh, qtd);
+ }
+ qh->should_be_inactive = 0;
}
/*-------------------------------------------------------------------------*/
@@ -438,6 +442,7 @@
(hw->hw_token & ACTIVE_BIT(ehci))) {
token = hc32_to_cpu(ehci, hw->hw_token);
hw->hw_token &= ~ACTIVE_BIT(ehci);
+ qh->should_be_inactive = 1;
/* An unlink may leave an incomplete
* async transaction in the TT buffer.
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 46f62e4..ec61aed 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -439,6 +439,7 @@
unsigned dequeue_during_giveback:1;
unsigned exception:1; /* got a fault, or an unlink
was requested */
+ unsigned should_be_inactive:1;
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 1498061..f82ad5d 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -85,7 +85,7 @@
void fhci_push_dummy_bd(struct endpoint *ep)
{
- if (ep->already_pushed_dummy_bd == false) {
+ if (!ep->already_pushed_dummy_bd) {
u16 td_status = in_be16(&ep->empty_td->status);
out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 760cb57..04dcedf 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -99,13 +99,13 @@
/* Some boards misreport power switching/overcurrent */
-static bool distrust_firmware = 1;
+static bool distrust_firmware = true;
module_param (distrust_firmware, bool, 0);
MODULE_PARM_DESC (distrust_firmware,
"true to distrust firmware power/overcurrent setup");
/* Some boards leave IR set wrongly, since they fail BIOS/SMM handshakes */
-static bool no_handshake = 0;
+static bool no_handshake;
module_param (no_handshake, bool, 0);
MODULE_PARM_DESC (no_handshake, "true (not default) disables BIOS handshake");
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index ba1bec7d..e8c006e 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -365,19 +365,19 @@
if (!pdata)
return -ENOMEM;
- if (of_get_property(np, "marvell,enable-port1", NULL))
+ if (of_property_read_bool(np, "marvell,enable-port1"))
pdata->flags |= ENABLE_PORT1;
- if (of_get_property(np, "marvell,enable-port2", NULL))
+ if (of_property_read_bool(np, "marvell,enable-port2"))
pdata->flags |= ENABLE_PORT2;
- if (of_get_property(np, "marvell,enable-port3", NULL))
+ if (of_property_read_bool(np, "marvell,enable-port3"))
pdata->flags |= ENABLE_PORT3;
- if (of_get_property(np, "marvell,port-sense-low", NULL))
+ if (of_property_read_bool(np, "marvell,port-sense-low"))
pdata->flags |= POWER_SENSE_LOW;
- if (of_get_property(np, "marvell,power-control-low", NULL))
+ if (of_property_read_bool(np, "marvell,power-control-low"))
pdata->flags |= POWER_CONTROL_LOW;
- if (of_get_property(np, "marvell,no-oc-protection", NULL))
+ if (of_property_read_bool(np, "marvell,no-oc-protection"))
pdata->flags |= NO_OC_PROTECTION;
- if (of_get_property(np, "marvell,oc-mode-perport", NULL))
+ if (of_property_read_bool(np, "marvell,oc-mode-perport"))
pdata->flags |= OC_MODE_PERPORT;
if (!of_property_read_u32(np, "marvell,power-on-delay", &tmp))
pdata->power_on_delay = tmp;
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 1f139d8..bc74aca 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -394,8 +394,7 @@
u32 temp;
#ifdef DEBUG
- if (!HC_IS_RUNNING(oxu_to_hcd(oxu)->state))
- BUG();
+ BUG_ON(!HC_IS_RUNNING(oxu_to_hcd(oxu)->state));
#endif
/* wait for any schedule enables/disables to take effect */
@@ -1709,9 +1708,8 @@
#ifdef DEBUG
assert_spin_locked(&oxu->lock);
- if (oxu->reclaim || (qh->qh_state != QH_STATE_LINKED
- && qh->qh_state != QH_STATE_UNLINK_WAIT))
- BUG();
+ BUG_ON(oxu->reclaim || (qh->qh_state != QH_STATE_LINKED
+ && qh->qh_state != QH_STATE_UNLINK_WAIT));
#endif
/* stop async schedule right now? */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index f940056..26cb8c8 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -984,24 +984,17 @@
* Find the Legacy Support Capability register -
* this is optional for xHCI host controllers.
*/
- ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET);
- do {
- if ((ext_cap_offset + sizeof(val)) > len) {
- /* We're reading garbage from the controller */
- dev_warn(&pdev->dev,
- "xHCI controller failing to respond");
- return;
- }
+ ext_cap_offset = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_LEGACY);
- if (!ext_cap_offset)
- /* We've reached the end of the extended capabilities */
- goto hc_init;
+ if (!ext_cap_offset)
+ goto hc_init;
- val = readl(base + ext_cap_offset);
- if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY)
- break;
- ext_cap_offset = xhci_find_next_cap_offset(base, ext_cap_offset);
- } while (1);
+ if ((ext_cap_offset + sizeof(val)) > len) {
+ /* We're reading garbage from the controller */
+ dev_warn(&pdev->dev, "xHCI controller failing to respond");
+ return;
+ }
+ val = readl(base + ext_cap_offset);
/* If the BIOS owns the HC, signal that the OS wants it, and wait */
if (val & XHCI_HC_BIOS_OWNED) {
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 692ccc6..05c85c7 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -73,7 +73,7 @@
#define INT_MODULE_PARM(n, v) static int n = v;module_param(n, int, 0444)
INT_MODULE_PARM(testing, 0);
/* Some boards misreport power switching/overcurrent*/
-static bool distrust_firmware = 1;
+static bool distrust_firmware = true;
module_param(distrust_firmware, bool, 0);
MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
"t setup");
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index da6f56d..c17ea15 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -248,11 +248,10 @@
dma_addr_t dma_handle;
struct uhci_qh *qh;
- qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
+ qh = dma_pool_zalloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
if (!qh)
return NULL;
- memset(qh, 0, sizeof(*qh));
qh->dma_handle = dma_handle;
qh->element = UHCI_PTR_TERM(uhci);
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 9f1c053..1a8e960 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -30,10 +30,9 @@
struct whc_qset *qset;
dma_addr_t dma;
- qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma);
+ qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma);
if (qset == NULL)
return NULL;
- memset(qset, 0, sizeof(struct whc_qset));
qset->qset_dma = dma;
qset->whc = whc;
@@ -400,7 +399,7 @@
struct whc *whc = qset->whc;
unsigned long flags;
- if (wurb->is_async == true)
+ if (wurb->is_async)
asl_update(whc, WUSBCMD_ASYNC_UPDATED
| WUSBCMD_ASYNC_SYNCED_DB
| WUSBCMD_ASYNC_QSET_RM);
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 9fe3225..04ce6b1 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -91,66 +91,39 @@
#include <linux/io.h>
/**
- * Return the next extended capability pointer register.
- *
- * @base PCI register base address.
- *
- * @ext_offset Offset of the 32-bit register that contains the extended
- * capabilites pointer. If searching for the first extended capability, pass
- * in XHCI_HCC_PARAMS_OFFSET. If searching for the next extended capability,
- * pass in the offset of the current extended capability register.
- *
- * Returns 0 if there is no next extended capability register or returns the register offset
- * from the PCI registers base address.
- */
-static inline int xhci_find_next_cap_offset(void __iomem *base, int ext_offset)
-{
- u32 next;
-
- next = readl(base + ext_offset);
-
- if (ext_offset == XHCI_HCC_PARAMS_OFFSET) {
- /* Find the first extended capability */
- next = XHCI_HCC_EXT_CAPS(next);
- ext_offset = 0;
- } else {
- /* Find the next extended capability */
- next = XHCI_EXT_CAPS_NEXT(next);
- }
-
- if (!next)
- return 0;
- /*
- * Address calculation from offset of extended capabilities
- * (or HCCPARAMS) register - see section 5.3.6 and section 7.
- */
- return ext_offset + (next << 2);
-}
-
-/**
* Find the offset of the extended capabilities with capability ID id.
*
- * @base PCI MMIO registers base address.
- * @ext_offset Offset from base of the first extended capability to look at,
- * or the address of HCCPARAMS.
- * @id Extended capability ID to search for.
+ * @base PCI MMIO registers base address.
+ * @start address at which to start looking, (0 or HCC_PARAMS to start at
+ * beginning of list)
+ * @id Extended capability ID to search for.
*
- * This uses an arbitrary limit of XHCI_MAX_EXT_CAPS extended capabilities
- * to make sure that the list doesn't contain a loop.
+ * Returns the offset of the next matching extended capability structure.
+ * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL,
+ * and this provides a way to find them all.
*/
-static inline int xhci_find_ext_cap_by_id(void __iomem *base, int ext_offset, int id)
+
+static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id)
{
u32 val;
- int limit = XHCI_MAX_EXT_CAPS;
+ u32 next;
+ u32 offset;
- while (ext_offset && limit > 0) {
- val = readl(base + ext_offset);
- if (XHCI_EXT_CAPS_ID(val) == id)
- break;
- ext_offset = xhci_find_next_cap_offset(base, ext_offset);
- limit--;
- }
- if (limit > 0)
- return ext_offset;
+ offset = start;
+ if (!start || start == XHCI_HCC_PARAMS_OFFSET) {
+ val = readl(base + XHCI_HCC_PARAMS_OFFSET);
+ offset = XHCI_HCC_EXT_CAPS(val) << 2;
+ if (!offset)
+ return 0;
+ };
+ do {
+ val = readl(base + offset);
+ if (XHCI_EXT_CAPS_ID(val) == id && offset != start)
+ return offset;
+
+ next = XHCI_EXT_CAPS_NEXT(val);
+ offset += next << 2;
+ } while (next);
+
return 0;
}
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index f980c23..b30b4ce 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -855,7 +855,7 @@
xhci_hub_report_usb2_link_state(&status, raw_port_status);
}
if (bus_state->port_c_suspend & (1 << wIndex))
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ status |= USB_PORT_STAT_C_SUSPEND << 16;
return status;
}
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c48cbe7..5cd080e 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -47,13 +47,12 @@
if (!seg)
return NULL;
- seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
+ seg->trbs = dma_pool_zalloc(xhci->segment_pool, flags, &dma);
if (!seg->trbs) {
kfree(seg);
return NULL;
}
- memset(seg->trbs, 0, TRB_SEGMENT_SIZE);
/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
if (cycle_state == 0) {
for (i = 0; i < TRBS_PER_SEGMENT; i++)
@@ -517,12 +516,11 @@
if (type == XHCI_CTX_TYPE_INPUT)
ctx->size += CTX_SIZE(xhci->hcc_params);
- ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+ ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
if (!ctx->bytes) {
kfree(ctx);
return NULL;
}
- memset(ctx->bytes, 0, ctx->size);
return ctx;
}
@@ -1245,7 +1243,7 @@
interval = fls(desc_interval) - 1;
interval = clamp_val(interval, min_exponent, max_exponent);
if ((1 << interval) != desc_interval)
- dev_warn(&udev->dev,
+ dev_dbg(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
@@ -2064,17 +2062,19 @@
}
static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
- __le32 __iomem *addr, u8 major_revision, int max_caps)
+ __le32 __iomem *addr, int max_caps)
{
u32 temp, port_offset, port_count;
int i;
+ u8 major_revision;
struct xhci_hub *rhub;
temp = readl(addr);
+ major_revision = XHCI_EXT_PORT_MAJOR(temp);
- if (XHCI_EXT_PORT_MAJOR(temp) == 0x03) {
+ if (major_revision == 0x03) {
rhub = &xhci->usb3_rhub;
- } else if (XHCI_EXT_PORT_MAJOR(temp) <= 0x02) {
+ } else if (major_revision <= 0x02) {
rhub = &xhci->usb2_rhub;
} else {
xhci_warn(xhci, "Ignoring unknown port speed, "
@@ -2190,19 +2190,12 @@
*/
static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
{
- __le32 __iomem *addr, *tmp_addr;
- u32 offset, tmp_offset;
+ void __iomem *base;
+ u32 offset;
unsigned int num_ports;
int i, j, port_index;
int cap_count = 0;
-
- addr = &xhci->cap_regs->hcc_params;
- offset = XHCI_HCC_EXT_CAPS(readl(addr));
- if (offset == 0) {
- xhci_err(xhci, "No Extended Capability registers, "
- "unable to set up roothub.\n");
- return -ENODEV;
- }
+ u32 cap_start;
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
@@ -2220,48 +2213,34 @@
for (j = 0; j < XHCI_MAX_INTERVAL; j++)
INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints);
}
+ base = &xhci->cap_regs->hc_capbase;
- /*
- * For whatever reason, the first capability offset is from the
- * capability register base, not from the HCCPARAMS register.
- * See section 5.3.6 for offset calculation.
- */
- addr = &xhci->cap_regs->hc_capbase + offset;
+ cap_start = xhci_find_next_ext_cap(base, 0, XHCI_EXT_CAPS_PROTOCOL);
+ if (!cap_start) {
+ xhci_err(xhci, "No Extended Capability registers, unable to set up roothub\n");
+ return -ENODEV;
+ }
- tmp_addr = addr;
- tmp_offset = offset;
-
+ offset = cap_start;
/* count extended protocol capability entries for later caching */
- do {
- u32 cap_id;
- cap_id = readl(tmp_addr);
- if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
- cap_count++;
- tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id);
- tmp_addr += tmp_offset;
- } while (tmp_offset);
+ while (offset) {
+ cap_count++;
+ offset = xhci_find_next_ext_cap(base, offset,
+ XHCI_EXT_CAPS_PROTOCOL);
+ }
xhci->ext_caps = kzalloc(sizeof(*xhci->ext_caps) * cap_count, flags);
if (!xhci->ext_caps)
return -ENOMEM;
- while (1) {
- u32 cap_id;
+ offset = cap_start;
- cap_id = readl(addr);
- if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
- xhci_add_in_port(xhci, num_ports, addr,
- (u8) XHCI_EXT_PORT_MAJOR(cap_id),
- cap_count);
- offset = XHCI_EXT_CAPS_NEXT(cap_id);
- if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
- == num_ports)
+ while (offset) {
+ xhci_add_in_port(xhci, num_ports, base + offset, cap_count);
+ if (xhci->num_usb2_ports + xhci->num_usb3_ports == num_ports)
break;
- /*
- * Once you're into the Extended Capabilities, the offset is
- * always relative to the register holding the offset.
- */
- addr += offset;
+ offset = xhci_find_next_ext_cap(base, offset,
+ XHCI_EXT_CAPS_PROTOCOL);
}
if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
new file mode 100644
index 0000000..c30de7c
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -0,0 +1,415 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author:
+ * Zhigang.Wei <zhigang.wei@mediatek.com>
+ * Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "xhci.h"
+#include "xhci-mtk.h"
+
+#define SS_BW_BOUNDARY 51000
+/* table 5-5. High-speed Isoc Transaction Limits in usb_20 spec */
+#define HS_BW_BOUNDARY 6144
+/* usb2 spec section11.18.1: at most 188 FS bytes per microframe */
+#define FS_PAYLOAD_MAX 188
+
+/* mtk scheduler bitmasks */
+#define EP_BPKTS(p) ((p) & 0x3f)
+#define EP_BCSCOUNT(p) (((p) & 0x7) << 8)
+#define EP_BBM(p) ((p) << 11)
+#define EP_BOFFSET(p) ((p) & 0x3fff)
+#define EP_BREPEAT(p) (((p) & 0x7fff) << 16)
+
+static int is_fs_or_ls(enum usb_device_speed speed)
+{
+ return speed == USB_SPEED_FULL || speed == USB_SPEED_LOW;
+}
+
+/*
+* get the index of bandwidth domains array which @ep belongs to.
+*
+* the bandwidth domain array is saved to @sch_array of struct xhci_hcd_mtk,
+* each HS root port is treated as a single bandwidth domain,
+* but each SS root port is treated as two bandwidth domains, one for IN eps,
+* one for OUT eps.
+* @real_port value is defined as follow according to xHCI spec:
+* 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc
+* so the bandwidth domain array is organized as follow for simplification:
+* SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY
+*/
+static int get_bw_index(struct xhci_hcd *xhci, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_virt_device *virt_dev;
+ int bw_index;
+
+ virt_dev = xhci->devs[udev->slot_id];
+
+ if (udev->speed == USB_SPEED_SUPER) {
+ if (usb_endpoint_dir_out(&ep->desc))
+ bw_index = (virt_dev->real_port - 1) * 2;
+ else
+ bw_index = (virt_dev->real_port - 1) * 2 + 1;
+ } else {
+ /* add one more for each SS port */
+ bw_index = virt_dev->real_port + xhci->num_usb3_ports - 1;
+ }
+
+ return bw_index;
+}
+
+static void setup_sch_info(struct usb_device *udev,
+ struct xhci_ep_ctx *ep_ctx, struct mu3h_sch_ep_info *sch_ep)
+{
+ u32 ep_type;
+ u32 ep_interval;
+ u32 max_packet_size;
+ u32 max_burst;
+ u32 mult;
+ u32 esit_pkts;
+
+ ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2));
+ ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info));
+ max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2));
+ max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2));
+ mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info));
+
+ sch_ep->esit = 1 << ep_interval;
+ sch_ep->offset = 0;
+ sch_ep->burst_mode = 0;
+
+ if (udev->speed == USB_SPEED_HIGH) {
+ sch_ep->cs_count = 0;
+
+ /*
+ * usb_20 spec section5.9
+ * a single microframe is enough for HS synchromous endpoints
+ * in a interval
+ */
+ sch_ep->num_budget_microframes = 1;
+ sch_ep->repeat = 0;
+
+ /*
+ * xHCI spec section6.2.3.4
+ * @max_burst is the number of additional transactions
+ * opportunities per microframe
+ */
+ sch_ep->pkts = max_burst + 1;
+ sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts;
+ } else if (udev->speed == USB_SPEED_SUPER) {
+ /* usb3_r1 spec section4.4.7 & 4.4.8 */
+ sch_ep->cs_count = 0;
+ esit_pkts = (mult + 1) * (max_burst + 1);
+ if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) {
+ sch_ep->pkts = esit_pkts;
+ sch_ep->num_budget_microframes = 1;
+ sch_ep->repeat = 0;
+ }
+
+ if (ep_type == ISOC_IN_EP || ep_type == ISOC_OUT_EP) {
+ if (esit_pkts <= sch_ep->esit)
+ sch_ep->pkts = 1;
+ else
+ sch_ep->pkts = roundup_pow_of_two(esit_pkts)
+ / sch_ep->esit;
+
+ sch_ep->num_budget_microframes =
+ DIV_ROUND_UP(esit_pkts, sch_ep->pkts);
+
+ if (sch_ep->num_budget_microframes > 1)
+ sch_ep->repeat = 1;
+ else
+ sch_ep->repeat = 0;
+ }
+ sch_ep->bw_cost_per_microframe = max_packet_size * sch_ep->pkts;
+ } else if (is_fs_or_ls(udev->speed)) {
+
+ /*
+ * usb_20 spec section11.18.4
+ * assume worst cases
+ */
+ sch_ep->repeat = 0;
+ sch_ep->pkts = 1; /* at most one packet for each microframe */
+ if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) {
+ sch_ep->cs_count = 3; /* at most need 3 CS*/
+ /* one for SS and one for budgeted transaction */
+ sch_ep->num_budget_microframes = sch_ep->cs_count + 2;
+ sch_ep->bw_cost_per_microframe = max_packet_size;
+ }
+ if (ep_type == ISOC_OUT_EP) {
+
+ /*
+ * the best case FS budget assumes that 188 FS bytes
+ * occur in each microframe
+ */
+ sch_ep->num_budget_microframes = DIV_ROUND_UP(
+ max_packet_size, FS_PAYLOAD_MAX);
+ sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX;
+ sch_ep->cs_count = sch_ep->num_budget_microframes;
+ }
+ if (ep_type == ISOC_IN_EP) {
+ /* at most need additional two CS. */
+ sch_ep->cs_count = DIV_ROUND_UP(
+ max_packet_size, FS_PAYLOAD_MAX) + 2;
+ sch_ep->num_budget_microframes = sch_ep->cs_count + 2;
+ sch_ep->bw_cost_per_microframe = FS_PAYLOAD_MAX;
+ }
+ }
+}
+
+/* Get maximum bandwidth when we schedule at offset slot. */
+static u32 get_max_bw(struct mu3h_sch_bw_info *sch_bw,
+ struct mu3h_sch_ep_info *sch_ep, u32 offset)
+{
+ u32 num_esit;
+ u32 max_bw = 0;
+ int i;
+ int j;
+
+ num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
+ for (i = 0; i < num_esit; i++) {
+ u32 base = offset + i * sch_ep->esit;
+
+ for (j = 0; j < sch_ep->num_budget_microframes; j++) {
+ if (sch_bw->bus_bw[base + j] > max_bw)
+ max_bw = sch_bw->bus_bw[base + j];
+ }
+ }
+ return max_bw;
+}
+
+static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw,
+ struct mu3h_sch_ep_info *sch_ep, int bw_cost)
+{
+ u32 num_esit;
+ u32 base;
+ int i;
+ int j;
+
+ num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit;
+ for (i = 0; i < num_esit; i++) {
+ base = sch_ep->offset + i * sch_ep->esit;
+ for (j = 0; j < sch_ep->num_budget_microframes; j++)
+ sch_bw->bus_bw[base + j] += bw_cost;
+ }
+}
+
+static int check_sch_bw(struct usb_device *udev,
+ struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep)
+{
+ u32 offset;
+ u32 esit;
+ u32 num_budget_microframes;
+ u32 min_bw;
+ u32 min_index;
+ u32 worst_bw;
+ u32 bw_boundary;
+
+ if (sch_ep->esit > XHCI_MTK_MAX_ESIT)
+ sch_ep->esit = XHCI_MTK_MAX_ESIT;
+
+ esit = sch_ep->esit;
+ num_budget_microframes = sch_ep->num_budget_microframes;
+
+ /*
+ * Search through all possible schedule microframes.
+ * and find a microframe where its worst bandwidth is minimum.
+ */
+ min_bw = ~0;
+ min_index = 0;
+ for (offset = 0; offset < esit; offset++) {
+ if ((offset + num_budget_microframes) > sch_ep->esit)
+ break;
+
+ /*
+ * usb_20 spec section11.18:
+ * must never schedule Start-Split in Y6
+ */
+ if (is_fs_or_ls(udev->speed) && (offset % 8 == 6))
+ continue;
+
+ worst_bw = get_max_bw(sch_bw, sch_ep, offset);
+ if (min_bw > worst_bw) {
+ min_bw = worst_bw;
+ min_index = offset;
+ }
+ if (min_bw == 0)
+ break;
+ }
+ sch_ep->offset = min_index;
+
+ bw_boundary = (udev->speed == USB_SPEED_SUPER)
+ ? SS_BW_BOUNDARY : HS_BW_BOUNDARY;
+
+ /* check bandwidth */
+ if (min_bw + sch_ep->bw_cost_per_microframe > bw_boundary)
+ return -ERANGE;
+
+ /* update bus bandwidth info */
+ update_bus_bw(sch_bw, sch_ep, sch_ep->bw_cost_per_microframe);
+
+ return 0;
+}
+
+static bool need_bw_sch(struct usb_host_endpoint *ep,
+ enum usb_device_speed speed, int has_tt)
+{
+ /* only for periodic endpoints */
+ if (usb_endpoint_xfer_control(&ep->desc)
+ || usb_endpoint_xfer_bulk(&ep->desc))
+ return false;
+
+ /*
+ * for LS & FS periodic endpoints which its device don't attach
+ * to TT are also ignored, root-hub will schedule them directly
+ */
+ if (is_fs_or_ls(speed) && !has_tt)
+ return false;
+
+ return true;
+}
+
+int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
+{
+ struct mu3h_sch_bw_info *sch_array;
+ int num_usb_bus;
+ int i;
+
+ /* ss IN and OUT are separated */
+ num_usb_bus = mtk->num_u3_ports * 2 + mtk->num_u2_ports;
+
+ sch_array = kcalloc(num_usb_bus, sizeof(*sch_array), GFP_KERNEL);
+ if (sch_array == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < num_usb_bus; i++)
+ INIT_LIST_HEAD(&sch_array[i].bw_ep_list);
+
+ mtk->sch_array = sch_array;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_mtk_sch_init);
+
+void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk)
+{
+ kfree(mtk->sch_array);
+}
+EXPORT_SYMBOL_GPL(xhci_mtk_sch_exit);
+
+int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+ struct xhci_hcd *xhci;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_virt_device *virt_dev;
+ struct mu3h_sch_bw_info *sch_bw;
+ struct mu3h_sch_ep_info *sch_ep;
+ struct mu3h_sch_bw_info *sch_array;
+ unsigned int ep_index;
+ int bw_index;
+ int ret = 0;
+
+ xhci = hcd_to_xhci(hcd);
+ virt_dev = xhci->devs[udev->slot_id];
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
+ sch_array = mtk->sch_array;
+
+ xhci_dbg(xhci, "%s() type:%d, speed:%d, mpkt:%d, dir:%d, ep:%p\n",
+ __func__, usb_endpoint_type(&ep->desc), udev->speed,
+ GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)),
+ usb_endpoint_dir_in(&ep->desc), ep);
+
+ if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT))
+ return 0;
+
+ bw_index = get_bw_index(xhci, udev, ep);
+ sch_bw = &sch_array[bw_index];
+
+ sch_ep = kzalloc(sizeof(struct mu3h_sch_ep_info), GFP_NOIO);
+ if (!sch_ep)
+ return -ENOMEM;
+
+ setup_sch_info(udev, ep_ctx, sch_ep);
+
+ ret = check_sch_bw(udev, sch_bw, sch_ep);
+ if (ret) {
+ xhci_err(xhci, "Not enough bandwidth!\n");
+ kfree(sch_ep);
+ return -ENOSPC;
+ }
+
+ list_add_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
+ sch_ep->ep = ep;
+
+ ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts)
+ | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode));
+ ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset)
+ | EP_BREPEAT(sch_ep->repeat));
+
+ xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",
+ sch_ep->pkts, sch_ep->cs_count, sch_ep->burst_mode,
+ sch_ep->offset, sch_ep->repeat);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(xhci_mtk_add_ep_quirk);
+
+void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+ struct xhci_hcd *xhci;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_virt_device *virt_dev;
+ struct mu3h_sch_bw_info *sch_array;
+ struct mu3h_sch_bw_info *sch_bw;
+ struct mu3h_sch_ep_info *sch_ep;
+ int bw_index;
+
+ xhci = hcd_to_xhci(hcd);
+ virt_dev = xhci->devs[udev->slot_id];
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ sch_array = mtk->sch_array;
+
+ xhci_dbg(xhci, "%s() type:%d, speed:%d, mpks:%d, dir:%d, ep:%p\n",
+ __func__, usb_endpoint_type(&ep->desc), udev->speed,
+ GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)),
+ usb_endpoint_dir_in(&ep->desc), ep);
+
+ if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT))
+ return;
+
+ bw_index = get_bw_index(xhci, udev, ep);
+ sch_bw = &sch_array[bw_index];
+
+ list_for_each_entry(sch_ep, &sch_bw->bw_ep_list, endpoint) {
+ if (sch_ep->ep == ep) {
+ update_bus_bw(sch_bw, sch_ep,
+ -sch_ep->bw_cost_per_microframe);
+ list_del(&sch_ep->endpoint);
+ kfree(sch_ep);
+ break;
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(xhci_mtk_drop_ep_quirk);
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
new file mode 100644
index 0000000..c9ab6a4
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.c
@@ -0,0 +1,763 @@
+/*
+ * MediaTek xHCI Host Controller Driver
+ *
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author:
+ * Chunfeng Yun <chunfeng.yun@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include "xhci.h"
+#include "xhci-mtk.h"
+
+/* ip_pw_ctrl0 register */
+#define CTRL0_IP_SW_RST BIT(0)
+
+/* ip_pw_ctrl1 register */
+#define CTRL1_IP_HOST_PDN BIT(0)
+
+/* ip_pw_ctrl2 register */
+#define CTRL2_IP_DEV_PDN BIT(0)
+
+/* ip_pw_sts1 register */
+#define STS1_IP_SLEEP_STS BIT(30)
+#define STS1_XHCI_RST BIT(11)
+#define STS1_SYS125_RST BIT(10)
+#define STS1_REF_RST BIT(8)
+#define STS1_SYSPLL_STABLE BIT(0)
+
+/* ip_xhci_cap register */
+#define CAP_U3_PORT_NUM(p) ((p) & 0xff)
+#define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff)
+
+/* u3_ctrl_p register */
+#define CTRL_U3_PORT_HOST_SEL BIT(2)
+#define CTRL_U3_PORT_PDN BIT(1)
+#define CTRL_U3_PORT_DIS BIT(0)
+
+/* u2_ctrl_p register */
+#define CTRL_U2_PORT_HOST_SEL BIT(2)
+#define CTRL_U2_PORT_PDN BIT(1)
+#define CTRL_U2_PORT_DIS BIT(0)
+
+/* u2_phy_pll register */
+#define CTRL_U2_FORCE_PLL_STB BIT(28)
+
+#define PERI_WK_CTRL0 0x400
+#define UWK_CTR0_0P_LS_PE BIT(8) /* posedge */
+#define UWK_CTR0_0P_LS_NE BIT(7) /* negedge for 0p linestate*/
+#define UWK_CTL1_1P_LS_C(x) (((x) & 0xf) << 1)
+#define UWK_CTL1_1P_LS_E BIT(0)
+
+#define PERI_WK_CTRL1 0x404
+#define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26)
+#define UWK_CTL1_IS_E BIT(25)
+#define UWK_CTL1_0P_LS_C(x) (((x) & 0xf) << 21)
+#define UWK_CTL1_0P_LS_E BIT(20)
+#define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */
+#define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */
+#define UWK_CTL1_IDDIG_P BIT(9) /* polarity */
+#define UWK_CTL1_0P_LS_P BIT(7)
+#define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */
+
+enum ssusb_wakeup_src {
+ SSUSB_WK_IP_SLEEP = 1,
+ SSUSB_WK_LINE_STATE = 2,
+};
+
+static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
+{
+ struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+ u32 value, check_val;
+ int ret;
+ int i;
+
+ /* power on host ip */
+ value = readl(&ippc->ip_pw_ctr1);
+ value &= ~CTRL1_IP_HOST_PDN;
+ writel(value, &ippc->ip_pw_ctr1);
+
+ /* power on and enable all u3 ports */
+ for (i = 0; i < mtk->num_u3_ports; i++) {
+ value = readl(&ippc->u3_ctrl_p[i]);
+ value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS);
+ value |= CTRL_U3_PORT_HOST_SEL;
+ writel(value, &ippc->u3_ctrl_p[i]);
+ }
+
+ /* power on and enable all u2 ports */
+ for (i = 0; i < mtk->num_u2_ports; i++) {
+ value = readl(&ippc->u2_ctrl_p[i]);
+ value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS);
+ value |= CTRL_U2_PORT_HOST_SEL;
+ writel(value, &ippc->u2_ctrl_p[i]);
+ }
+
+ /*
+ * wait for clocks to be stable, and clock domains reset to
+ * be inactive after power on and enable ports
+ */
+ check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
+ STS1_SYS125_RST | STS1_XHCI_RST;
+
+ ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
+ (check_val == (value & check_val)), 100, 20000);
+ if (ret) {
+ dev_err(mtk->dev, "clocks are not stable (0x%x)\n", value);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
+{
+ struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+ u32 value;
+ int ret;
+ int i;
+
+ /* power down all u3 ports */
+ for (i = 0; i < mtk->num_u3_ports; i++) {
+ value = readl(&ippc->u3_ctrl_p[i]);
+ value |= CTRL_U3_PORT_PDN;
+ writel(value, &ippc->u3_ctrl_p[i]);
+ }
+
+ /* power down all u2 ports */
+ for (i = 0; i < mtk->num_u2_ports; i++) {
+ value = readl(&ippc->u2_ctrl_p[i]);
+ value |= CTRL_U2_PORT_PDN;
+ writel(value, &ippc->u2_ctrl_p[i]);
+ }
+
+ /* power down host ip */
+ value = readl(&ippc->ip_pw_ctr1);
+ value |= CTRL1_IP_HOST_PDN;
+ writel(value, &ippc->ip_pw_ctr1);
+
+ /* wait for host ip to sleep */
+ ret = readl_poll_timeout(&ippc->ip_pw_sts1, value,
+ (value & STS1_IP_SLEEP_STS), 100, 100000);
+ if (ret) {
+ dev_err(mtk->dev, "ip sleep failed!!!\n");
+ return ret;
+ }
+ return 0;
+}
+
+static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk)
+{
+ struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs;
+ u32 value;
+
+ /* reset whole ip */
+ value = readl(&ippc->ip_pw_ctr0);
+ value |= CTRL0_IP_SW_RST;
+ writel(value, &ippc->ip_pw_ctr0);
+ udelay(1);
+ value = readl(&ippc->ip_pw_ctr0);
+ value &= ~CTRL0_IP_SW_RST;
+ writel(value, &ippc->ip_pw_ctr0);
+
+ /*
+ * device ip is default power-on in fact
+ * power down device ip, otherwise ip-sleep will fail
+ */
+ value = readl(&ippc->ip_pw_ctr2);
+ value |= CTRL2_IP_DEV_PDN;
+ writel(value, &ippc->ip_pw_ctr2);
+
+ value = readl(&ippc->ip_xhci_cap);
+ mtk->num_u3_ports = CAP_U3_PORT_NUM(value);
+ mtk->num_u2_ports = CAP_U2_PORT_NUM(value);
+ dev_dbg(mtk->dev, "%s u2p:%d, u3p:%d\n", __func__,
+ mtk->num_u2_ports, mtk->num_u3_ports);
+
+ return xhci_mtk_host_enable(mtk);
+}
+
+static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk)
+{
+ int ret;
+
+ ret = clk_prepare_enable(mtk->sys_clk);
+ if (ret) {
+ dev_err(mtk->dev, "failed to enable sys_clk\n");
+ goto sys_clk_err;
+ }
+
+ if (mtk->wakeup_src) {
+ ret = clk_prepare_enable(mtk->wk_deb_p0);
+ if (ret) {
+ dev_err(mtk->dev, "failed to enable wk_deb_p0\n");
+ goto usb_p0_err;
+ }
+
+ ret = clk_prepare_enable(mtk->wk_deb_p1);
+ if (ret) {
+ dev_err(mtk->dev, "failed to enable wk_deb_p1\n");
+ goto usb_p1_err;
+ }
+ }
+ return 0;
+
+usb_p1_err:
+ clk_disable_unprepare(mtk->wk_deb_p0);
+usb_p0_err:
+ clk_disable_unprepare(mtk->sys_clk);
+sys_clk_err:
+ return -EINVAL;
+}
+
+static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk)
+{
+ if (mtk->wakeup_src) {
+ clk_disable_unprepare(mtk->wk_deb_p1);
+ clk_disable_unprepare(mtk->wk_deb_p0);
+ }
+ clk_disable_unprepare(mtk->sys_clk);
+}
+
+/* only clocks can be turn off for ip-sleep wakeup mode */
+static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+ struct regmap *pericfg = mtk->pericfg;
+
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_IS_P;
+ tmp &= ~(UWK_CTL1_IS_C(0xf));
+ tmp |= UWK_CTL1_IS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E);
+
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n",
+ __func__, tmp);
+}
+
+static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+
+ regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_IS_E;
+ regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp);
+}
+
+/*
+* for line-state wakeup mode, phy's power should not power-down
+* and only support cable plug in/out
+*/
+static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+ struct regmap *pericfg = mtk->pericfg;
+
+ /* line-state of u2-port0 */
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_0P_LS_P;
+ tmp &= ~(UWK_CTL1_0P_LS_C(0xf));
+ tmp |= UWK_CTL1_0P_LS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E);
+
+ /* line-state of u2-port1 */
+ regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
+ tmp &= ~(UWK_CTL1_1P_LS_C(0xf));
+ tmp |= UWK_CTL1_1P_LS_C(0x8);
+ regmap_write(pericfg, PERI_WK_CTRL0, tmp);
+ regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E);
+}
+
+static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk)
+{
+ u32 tmp;
+ struct regmap *pericfg = mtk->pericfg;
+
+ /* line-state of u2-port0 */
+ regmap_read(pericfg, PERI_WK_CTRL1, &tmp);
+ tmp &= ~UWK_CTL1_0P_LS_E;
+ regmap_write(pericfg, PERI_WK_CTRL1, tmp);
+
+ /* line-state of u2-port1 */
+ regmap_read(pericfg, PERI_WK_CTRL0, &tmp);
+ tmp &= ~UWK_CTL1_1P_LS_E;
+ regmap_write(pericfg, PERI_WK_CTRL0, tmp);
+}
+
+static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk)
+{
+ if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+ usb_wakeup_ip_sleep_en(mtk);
+ else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
+ usb_wakeup_line_state_en(mtk);
+}
+
+static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk)
+{
+ if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP)
+ usb_wakeup_ip_sleep_dis(mtk);
+ else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE)
+ usb_wakeup_line_state_dis(mtk);
+}
+
+static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
+ struct device_node *dn)
+{
+ struct device *dev = mtk->dev;
+
+ /*
+ * wakeup function is optional, so it is not an error if this property
+ * does not exist, and in such case, no need to get relative
+ * properties anymore.
+ */
+ of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src);
+ if (!mtk->wakeup_src)
+ return 0;
+
+ mtk->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
+ if (IS_ERR(mtk->wk_deb_p0)) {
+ dev_err(dev, "fail to get wakeup_deb_p0\n");
+ return PTR_ERR(mtk->wk_deb_p0);
+ }
+
+ mtk->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
+ if (IS_ERR(mtk->wk_deb_p1)) {
+ dev_err(dev, "fail to get wakeup_deb_p1\n");
+ return PTR_ERR(mtk->wk_deb_p1);
+ }
+
+ mtk->pericfg = syscon_regmap_lookup_by_phandle(dn,
+ "mediatek,syscon-wakeup");
+ if (IS_ERR(mtk->pericfg)) {
+ dev_err(dev, "fail to get pericfg regs\n");
+ return PTR_ERR(mtk->pericfg);
+ }
+
+ return 0;
+}
+
+static int xhci_mtk_setup(struct usb_hcd *hcd);
+static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = {
+ .extra_priv_size = sizeof(struct xhci_hcd),
+ .reset = xhci_mtk_setup,
+};
+
+static struct hc_driver __read_mostly xhci_mtk_hc_driver;
+
+static int xhci_mtk_phy_init(struct xhci_hcd_mtk *mtk)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < mtk->num_phys; i++) {
+ ret = phy_init(mtk->phys[i]);
+ if (ret)
+ goto exit_phy;
+ }
+ return 0;
+
+exit_phy:
+ for (; i > 0; i--)
+ phy_exit(mtk->phys[i - 1]);
+
+ return ret;
+}
+
+static int xhci_mtk_phy_exit(struct xhci_hcd_mtk *mtk)
+{
+ int i;
+
+ for (i = 0; i < mtk->num_phys; i++)
+ phy_exit(mtk->phys[i]);
+
+ return 0;
+}
+
+static int xhci_mtk_phy_power_on(struct xhci_hcd_mtk *mtk)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < mtk->num_phys; i++) {
+ ret = phy_power_on(mtk->phys[i]);
+ if (ret)
+ goto power_off_phy;
+ }
+ return 0;
+
+power_off_phy:
+ for (; i > 0; i--)
+ phy_power_off(mtk->phys[i - 1]);
+
+ return ret;
+}
+
+static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk)
+{
+ unsigned int i;
+
+ for (i = 0; i < mtk->num_phys; i++)
+ phy_power_off(mtk->phys[i]);
+}
+
+static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk)
+{
+ int ret;
+
+ ret = regulator_enable(mtk->vbus);
+ if (ret) {
+ dev_err(mtk->dev, "failed to enable vbus\n");
+ return ret;
+ }
+
+ ret = regulator_enable(mtk->vusb33);
+ if (ret) {
+ dev_err(mtk->dev, "failed to enable vusb33\n");
+ regulator_disable(mtk->vbus);
+ return ret;
+ }
+ return 0;
+}
+
+static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk)
+{
+ regulator_disable(mtk->vbus);
+ regulator_disable(mtk->vusb33);
+}
+
+static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
+{
+ struct usb_hcd *hcd = xhci_to_hcd(xhci);
+ struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+
+ /*
+ * As of now platform drivers don't provide MSI support so we ensure
+ * here that the generic code does not try to make a pci_dev from our
+ * dev struct in order to setup MSI
+ */
+ xhci->quirks |= XHCI_PLAT;
+ xhci->quirks |= XHCI_MTK_HOST;
+ /*
+ * MTK host controller gives a spurious successful event after a
+ * short transfer. Ignore it.
+ */
+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ if (mtk->lpm_support)
+ xhci->quirks |= XHCI_LPM_SUPPORT;
+}
+
+/* called during probe() after chip reset completes */
+static int xhci_mtk_setup(struct usb_hcd *hcd)
+{
+ struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
+ int ret;
+
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ ret = xhci_mtk_ssusb_config(mtk);
+ if (ret)
+ return ret;
+ ret = xhci_mtk_sch_init(mtk);
+ if (ret)
+ return ret;
+ }
+
+ return xhci_gen_setup(hcd, xhci_mtk_quirks);
+}
+
+static int xhci_mtk_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct xhci_hcd_mtk *mtk;
+ const struct hc_driver *driver;
+ struct xhci_hcd *xhci;
+ struct resource *res;
+ struct usb_hcd *hcd;
+ struct phy *phy;
+ int phy_num;
+ int ret = -ENODEV;
+ int irq;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ driver = &xhci_mtk_hc_driver;
+ mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL);
+ if (!mtk)
+ return -ENOMEM;
+
+ mtk->dev = dev;
+ mtk->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(mtk->vbus)) {
+ dev_err(dev, "fail to get vbus\n");
+ return PTR_ERR(mtk->vbus);
+ }
+
+ mtk->vusb33 = devm_regulator_get(dev, "vusb33");
+ if (IS_ERR(mtk->vusb33)) {
+ dev_err(dev, "fail to get vusb33\n");
+ return PTR_ERR(mtk->vusb33);
+ }
+
+ mtk->sys_clk = devm_clk_get(dev, "sys_ck");
+ if (IS_ERR(mtk->sys_clk)) {
+ dev_err(dev, "fail to get sys_ck\n");
+ return PTR_ERR(mtk->sys_clk);
+ }
+
+ mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
+
+ ret = usb_wakeup_of_property_parse(mtk, node);
+ if (ret)
+ return ret;
+
+ mtk->num_phys = of_count_phandle_with_args(node,
+ "phys", "#phy-cells");
+ if (mtk->num_phys > 0) {
+ mtk->phys = devm_kcalloc(dev, mtk->num_phys,
+ sizeof(*mtk->phys), GFP_KERNEL);
+ if (!mtk->phys)
+ return -ENOMEM;
+ } else {
+ mtk->num_phys = 0;
+ }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ device_enable_async_suspend(dev);
+
+ ret = xhci_mtk_ldos_enable(mtk);
+ if (ret)
+ goto disable_pm;
+
+ ret = xhci_mtk_clks_enable(mtk);
+ if (ret)
+ goto disable_ldos;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ goto disable_clk;
+
+ /* Initialize dma_mask and coherent_dma_mask to 32-bits */
+ ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+ if (ret)
+ goto disable_clk;
+
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ else
+ dma_set_mask(dev, DMA_BIT_MASK(32));
+
+ hcd = usb_create_hcd(driver, dev, dev_name(dev));
+ if (!hcd) {
+ ret = -ENOMEM;
+ goto disable_clk;
+ }
+
+ /*
+ * USB 2.0 roothub is stored in the platform_device.
+ * Swap it with mtk HCD.
+ */
+ mtk->hcd = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, mtk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hcd->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hcd->regs)) {
+ ret = PTR_ERR(hcd->regs);
+ goto put_usb2_hcd;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ mtk->ippc_regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(mtk->ippc_regs)) {
+ ret = PTR_ERR(mtk->ippc_regs);
+ goto put_usb2_hcd;
+ }
+
+ for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) {
+ phy = devm_of_phy_get_by_index(dev, node, phy_num);
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ goto put_usb2_hcd;
+ }
+ mtk->phys[phy_num] = phy;
+ }
+
+ ret = xhci_mtk_phy_init(mtk);
+ if (ret)
+ goto put_usb2_hcd;
+
+ ret = xhci_mtk_phy_power_on(mtk);
+ if (ret)
+ goto exit_phys;
+
+ device_init_wakeup(dev, true);
+
+ xhci = hcd_to_xhci(hcd);
+ xhci->main_hcd = hcd;
+ xhci->shared_hcd = usb_create_shared_hcd(driver, dev,
+ dev_name(dev), hcd);
+ if (!xhci->shared_hcd) {
+ ret = -ENOMEM;
+ goto power_off_phys;
+ }
+
+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ xhci->shared_hcd->can_do_streams = 1;
+
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto put_usb3_hcd;
+
+ ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
+ if (ret)
+ goto dealloc_usb2_hcd;
+
+ return 0;
+
+dealloc_usb2_hcd:
+ usb_remove_hcd(hcd);
+
+put_usb3_hcd:
+ xhci_mtk_sch_exit(mtk);
+ usb_put_hcd(xhci->shared_hcd);
+
+power_off_phys:
+ xhci_mtk_phy_power_off(mtk);
+ device_init_wakeup(dev, false);
+
+exit_phys:
+ xhci_mtk_phy_exit(mtk);
+
+put_usb2_hcd:
+ usb_put_hcd(hcd);
+
+disable_clk:
+ xhci_mtk_clks_disable(mtk);
+
+disable_ldos:
+ xhci_mtk_ldos_disable(mtk);
+
+disable_pm:
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int xhci_mtk_remove(struct platform_device *dev)
+{
+ struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev);
+ struct usb_hcd *hcd = mtk->hcd;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ usb_remove_hcd(xhci->shared_hcd);
+ xhci_mtk_phy_power_off(mtk);
+ xhci_mtk_phy_exit(mtk);
+ device_init_wakeup(&dev->dev, false);
+
+ usb_remove_hcd(hcd);
+ usb_put_hcd(xhci->shared_hcd);
+ usb_put_hcd(hcd);
+ xhci_mtk_sch_exit(mtk);
+ xhci_mtk_clks_disable(mtk);
+ xhci_mtk_ldos_disable(mtk);
+ pm_runtime_put_sync(&dev->dev);
+ pm_runtime_disable(&dev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int xhci_mtk_suspend(struct device *dev)
+{
+ struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
+
+ xhci_mtk_host_disable(mtk);
+ xhci_mtk_phy_power_off(mtk);
+ xhci_mtk_clks_disable(mtk);
+ usb_wakeup_enable(mtk);
+ return 0;
+}
+
+static int xhci_mtk_resume(struct device *dev)
+{
+ struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
+
+ usb_wakeup_disable(mtk);
+ xhci_mtk_clks_enable(mtk);
+ xhci_mtk_phy_power_on(mtk);
+ xhci_mtk_host_enable(mtk);
+ return 0;
+}
+
+static const struct dev_pm_ops xhci_mtk_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume)
+};
+#define DEV_PM_OPS (&xhci_mtk_pm_ops)
+#else
+#define DEV_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_OF
+static const struct of_device_id mtk_xhci_of_match[] = {
+ { .compatible = "mediatek,mt8173-xhci"},
+ { },
+};
+MODULE_DEVICE_TABLE(of, mtk_xhci_of_match);
+#endif
+
+static struct platform_driver mtk_xhci_driver = {
+ .probe = xhci_mtk_probe,
+ .remove = xhci_mtk_remove,
+ .driver = {
+ .name = "xhci-mtk",
+ .pm = DEV_PM_OPS,
+ .of_match_table = of_match_ptr(mtk_xhci_of_match),
+ },
+};
+MODULE_ALIAS("platform:xhci-mtk");
+
+static int __init xhci_mtk_init(void)
+{
+ xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides);
+ return platform_driver_register(&mtk_xhci_driver);
+}
+module_init(xhci_mtk_init);
+
+static void __exit xhci_mtk_exit(void)
+{
+ platform_driver_unregister(&mtk_xhci_driver);
+}
+module_exit(xhci_mtk_exit);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
new file mode 100644
index 0000000..7da677c
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author:
+ * Zhigang.Wei <zhigang.wei@mediatek.com>
+ * Chunfeng.Yun <chunfeng.yun@mediatek.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _XHCI_MTK_H_
+#define _XHCI_MTK_H_
+
+#include "xhci.h"
+
+/**
+ * To simplify scheduler algorithm, set a upper limit for ESIT,
+ * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
+ * round down to the limit value, that means allocating more
+ * bandwidth to it.
+ */
+#define XHCI_MTK_MAX_ESIT 64
+
+/**
+ * struct mu3h_sch_bw_info: schedule information for bandwidth domain
+ *
+ * @bus_bw: array to keep track of bandwidth already used at each uframes
+ * @bw_ep_list: eps in the bandwidth domain
+ *
+ * treat a HS root port as a bandwidth domain, but treat a SS root port as
+ * two bandwidth domains, one for IN eps and another for OUT eps.
+ */
+struct mu3h_sch_bw_info {
+ u32 bus_bw[XHCI_MTK_MAX_ESIT];
+ struct list_head bw_ep_list;
+};
+
+/**
+ * struct mu3h_sch_ep_info: schedule information for endpoint
+ *
+ * @esit: unit is 125us, equal to 2 << Interval field in ep-context
+ * @num_budget_microframes: number of continuous uframes
+ * (@repeat==1) scheduled within the interval
+ * @bw_cost_per_microframe: bandwidth cost per microframe
+ * @endpoint: linked into bandwidth domain which it belongs to
+ * @ep: address of usb_host_endpoint struct
+ * @offset: which uframe of the interval that transfer should be
+ * scheduled first time within the interval
+ * @repeat: the time gap between two uframes that transfers are
+ * scheduled within a interval. in the simple algorithm, only
+ * assign 0 or 1 to it; 0 means using only one uframe in a
+ * interval, and 1 means using @num_budget_microframes
+ * continuous uframes
+ * @pkts: number of packets to be transferred in the scheduled uframes
+ * @cs_count: number of CS that host will trigger
+ * @burst_mode: burst mode for scheduling. 0: normal burst mode,
+ * distribute the bMaxBurst+1 packets for a single burst
+ * according to @pkts and @repeat, repeate the burst multiple
+ * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets
+ * according to @pkts and @repeat. normal mode is used by
+ * default
+ */
+struct mu3h_sch_ep_info {
+ u32 esit;
+ u32 num_budget_microframes;
+ u32 bw_cost_per_microframe;
+ struct list_head endpoint;
+ void *ep;
+ /*
+ * mtk xHCI scheduling information put into reserved DWs
+ * in ep context
+ */
+ u32 offset;
+ u32 repeat;
+ u32 pkts;
+ u32 cs_count;
+ u32 burst_mode;
+};
+
+#define MU3C_U3_PORT_MAX 4
+#define MU3C_U2_PORT_MAX 5
+
+/**
+ * struct mu3c_ippc_regs: MTK ssusb ip port control registers
+ * @ip_pw_ctr0~3: ip power and clock control registers
+ * @ip_pw_sts1~2: ip power and clock status registers
+ * @ip_xhci_cap: ip xHCI capability register
+ * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used
+ * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used
+ * @u2_phy_pll: usb2 phy pll control register
+ */
+struct mu3c_ippc_regs {
+ __le32 ip_pw_ctr0;
+ __le32 ip_pw_ctr1;
+ __le32 ip_pw_ctr2;
+ __le32 ip_pw_ctr3;
+ __le32 ip_pw_sts1;
+ __le32 ip_pw_sts2;
+ __le32 reserved0[3];
+ __le32 ip_xhci_cap;
+ __le32 reserved1[2];
+ __le64 u3_ctrl_p[MU3C_U3_PORT_MAX];
+ __le64 u2_ctrl_p[MU3C_U2_PORT_MAX];
+ __le32 reserved2;
+ __le32 u2_phy_pll;
+ __le32 reserved3[33]; /* 0x80 ~ 0xff */
+};
+
+struct xhci_hcd_mtk {
+ struct device *dev;
+ struct usb_hcd *hcd;
+ struct mu3h_sch_bw_info *sch_array;
+ struct mu3c_ippc_regs __iomem *ippc_regs;
+ int num_u2_ports;
+ int num_u3_ports;
+ struct regulator *vusb33;
+ struct regulator *vbus;
+ struct clk *sys_clk; /* sys and mac clock */
+ struct clk *wk_deb_p0; /* port0's wakeup debounce clock */
+ struct clk *wk_deb_p1;
+ struct regmap *pericfg;
+ struct phy **phys;
+ int num_phys;
+ int wakeup_src;
+ bool lpm_support;
+};
+
+static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
+{
+ return dev_get_drvdata(hcd->self.controller);
+}
+
+#if IS_ENABLED(CONFIG_USB_XHCI_MTK)
+int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk);
+void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk);
+int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+
+#else
+static inline int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd,
+ struct usb_device *udev, struct usb_host_endpoint *ep)
+{
+ return 0;
+}
+
+static inline void xhci_mtk_drop_ep_quirk(struct usb_hcd *hcd,
+ struct usb_device *udev, struct usb_host_endpoint *ep)
+{
+}
+
+#endif
+
+#endif /* _XHCI_MTK_H_ */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c621090..58c43ed 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -53,7 +53,6 @@
static int xhci_pci_setup(struct usb_hcd *hcd);
static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
- .extra_priv_size = sizeof(struct xhci_hcd),
.reset = xhci_pci_setup,
};
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 05647e6..770b6b0 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -22,6 +22,7 @@
#include <linux/acpi.h>
#include "xhci.h"
+#include "xhci-plat.h"
#include "xhci-mvebu.h"
#include "xhci-rcar.h"
@@ -31,7 +32,7 @@
static int xhci_plat_start(struct usb_hcd *hcd);
static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
- .extra_priv_size = sizeof(struct xhci_hcd),
+ .extra_priv_size = sizeof(struct xhci_plat_priv),
.reset = xhci_plat_setup,
.start = xhci_plat_start,
};
@@ -49,11 +50,10 @@
/* called during probe() after chip reset completes */
static int xhci_plat_setup(struct usb_hcd *hcd)
{
- struct device_node *of_node = hcd->self.controller->of_node;
int ret;
- if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
- of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) {
+ if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
+ xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3)) {
ret = xhci_rcar_init_quirk(hcd);
if (ret)
return ret;
@@ -64,19 +64,62 @@
static int xhci_plat_start(struct usb_hcd *hcd)
{
- struct device_node *of_node = hcd->self.controller->of_node;
-
- if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") ||
- of_device_is_compatible(of_node, "renesas,xhci-r8a7791"))
+ if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
+ xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
xhci_rcar_start(hcd);
return xhci_run(hcd);
}
+#ifdef CONFIG_OF
+static const struct xhci_plat_priv xhci_plat_marvell_armada = {
+ .type = XHCI_PLAT_TYPE_MARVELL_ARMADA,
+};
+
+static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
+ .type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
+ .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
+};
+
+static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
+ .type = XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
+ .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2,
+};
+
+static const struct of_device_id usb_xhci_of_match[] = {
+ {
+ .compatible = "generic-xhci",
+ }, {
+ .compatible = "xhci-platform",
+ }, {
+ .compatible = "marvell,armada-375-xhci",
+ .data = &xhci_plat_marvell_armada,
+ }, {
+ .compatible = "marvell,armada-380-xhci",
+ .data = &xhci_plat_marvell_armada,
+ }, {
+ .compatible = "renesas,xhci-r8a7790",
+ .data = &xhci_plat_renesas_rcar_gen2,
+ }, {
+ .compatible = "renesas,xhci-r8a7791",
+ .data = &xhci_plat_renesas_rcar_gen2,
+ }, {
+ .compatible = "renesas,xhci-r8a7793",
+ .data = &xhci_plat_renesas_rcar_gen2,
+ }, {
+ .compatible = "renesas,xhci-r8a7795",
+ .data = &xhci_plat_renesas_rcar_gen3,
+ }, {
+ },
+};
+MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
+#endif
+
static int xhci_plat_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
+ const struct of_device_id *match;
const struct hc_driver *driver;
struct xhci_hcd *xhci;
struct resource *res;
@@ -134,10 +177,17 @@
goto put_hcd;
}
- if (of_device_is_compatible(pdev->dev.of_node,
- "marvell,armada-375-xhci") ||
- of_device_is_compatible(pdev->dev.of_node,
- "marvell,armada-380-xhci")) {
+ xhci = hcd_to_xhci(hcd);
+ match = of_match_node(usb_xhci_of_match, node);
+ if (match) {
+ const struct xhci_plat_priv *priv_match = match->data;
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+ /* Just copy data for now */
+ *priv = *priv_match;
+ }
+
+ if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_MARVELL_ARMADA)) {
ret = xhci_mvebu_mbus_init_quirk(pdev);
if (ret)
goto disable_clk;
@@ -145,7 +195,6 @@
device_wakeup_enable(hcd->self.controller);
- xhci = hcd_to_xhci(hcd);
xhci->clk = clk;
xhci->main_hcd = hcd;
xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev,
@@ -256,19 +305,6 @@
#define DEV_PM_OPS NULL
#endif /* CONFIG_PM */
-#ifdef CONFIG_OF
-static const struct of_device_id usb_xhci_of_match[] = {
- { .compatible = "generic-xhci" },
- { .compatible = "xhci-platform" },
- { .compatible = "marvell,armada-375-xhci"},
- { .compatible = "marvell,armada-380-xhci"},
- { .compatible = "renesas,xhci-r8a7790"},
- { .compatible = "renesas,xhci-r8a7791"},
- { },
-};
-MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
-#endif
-
static const struct acpi_device_id usb_xhci_acpi_match[] = {
/* XHCI-compliant USB Controller */
{ "PNP0D10", },
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
new file mode 100644
index 0000000..5a2e2e3
--- /dev/null
+++ b/drivers/usb/host/xhci-plat.h
@@ -0,0 +1,39 @@
+/*
+ * xhci-plat.h - xHCI host controller driver platform Bus Glue.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef _XHCI_PLAT_H
+#define _XHCI_PLAT_H
+
+#include "xhci.h" /* for hcd_to_xhci() */
+
+enum xhci_plat_type {
+ XHCI_PLAT_TYPE_MARVELL_ARMADA,
+ XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
+ XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
+};
+
+struct xhci_plat_priv {
+ enum xhci_plat_type type;
+ const char *firmware_name;
+};
+
+#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
+
+static inline bool xhci_plat_type_is(struct usb_hcd *hcd,
+ enum xhci_plat_type type)
+{
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
+
+ if (priv && priv->type == type)
+ return true;
+ else
+ return false;
+}
+#endif /* _XHCI_PLAT_H */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index ff0d1b4..623100e 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -14,10 +14,17 @@
#include <linux/usb/phy.h>
#include "xhci.h"
+#include "xhci-plat.h"
#include "xhci-rcar.h"
-#define FIRMWARE_NAME "r8a779x_usb3_v1.dlmem"
-MODULE_FIRMWARE(FIRMWARE_NAME);
+/*
+* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes
+* performance degradation. So, this driver continues to use the V1 if R-Car
+* Gen2.
+* - The V1 firmware is impossible to use on R-Car Gen3.
+*/
+MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1);
+MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2);
/*** Register Offset ***/
#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */
@@ -56,6 +63,19 @@
#define RCAR_USB3_RX_POL_VAL BIT(21)
#define RCAR_USB3_TX_POL_VAL BIT(4)
+static void xhci_rcar_start_gen2(struct usb_hcd *hcd)
+{
+ /* LCLK Select */
+ writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
+ /* USB3.0 Configuration */
+ writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
+ writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
+ writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
+ /* USB3.0 Polarity */
+ writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
+ writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
+}
+
void xhci_rcar_start(struct usb_hcd *hcd)
{
u32 temp;
@@ -65,27 +85,23 @@
temp = readl(hcd->regs + RCAR_USB3_INT_ENA);
temp |= RCAR_USB3_INT_ENA_VAL;
writel(temp, hcd->regs + RCAR_USB3_INT_ENA);
- /* LCLK Select */
- writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
- /* USB3.0 Configuration */
- writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
- writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
- writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
- /* USB3.0 Polarity */
- writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
- writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
+ if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2))
+ xhci_rcar_start_gen2(hcd);
}
}
-static int xhci_rcar_download_firmware(struct device *dev, void __iomem *regs)
+static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
{
+ struct device *dev = hcd->self.controller;
+ void __iomem *regs = hcd->regs;
+ struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
const struct firmware *fw;
int retval, index, j, time;
int timeout = 10000;
u32 data, val, temp;
/* request R-Car USB3.0 firmware */
- retval = request_firmware(&fw, FIRMWARE_NAME, dev);
+ retval = request_firmware(&fw, priv->firmware_name, dev);
if (retval)
return retval;
@@ -144,5 +160,5 @@
if (!hcd->regs)
return 0;
- return xhci_rcar_download_firmware(hcd->self.controller, hcd->regs);
+ return xhci_rcar_download_firmware(hcd);
}
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index 5850125..2941a25 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -11,6 +11,9 @@
#ifndef _XHCI_RCAR_H
#define _XHCI_RCAR_H
+#define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem"
+#define XHCI_RCAR_FIRMWARE_NAME_V2 "r8a779x_usb3_v2.dlmem"
+
#if IS_ENABLED(CONFIG_USB_XHCI_RCAR)
void xhci_rcar_start(struct usb_hcd *hcd);
int xhci_rcar_init_quirk(struct usb_hcd *hcd);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index eeaa6c6..f1c21c4 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -68,6 +68,7 @@
#include <linux/slab.h>
#include "xhci.h"
#include "xhci-trace.h"
+#include "xhci-mtk.h"
/*
* Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
@@ -3075,17 +3076,22 @@
{
u32 maxp, total_packet_count;
- if (xhci->hci_version < 0x100)
+ /* MTK xHCI is mostly 0.97 but contains some features from 1.0 */
+ if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
return ((td_total_len - transferred) >> 10);
- maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
- total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
-
/* One TRB with a zero-length data packet. */
if (num_trbs_left == 0 || (transferred == 0 && trb_buff_len == 0) ||
trb_buff_len == td_total_len)
return 0;
+ /* for MTK xHCI, TD size doesn't include this TRB */
+ if (xhci->quirks & XHCI_MTK_HOST)
+ trb_buff_len = 0;
+
+ maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
+ total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
+
/* Queueing functions don't count the current TRB into transferred */
return (total_packet_count - ((transferred + trb_buff_len) / maxp));
}
@@ -3473,7 +3479,7 @@
field |= 0x1;
/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
- if (xhci->hci_version >= 0x100) {
+ if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) {
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3f91270..26a44c0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -31,6 +31,7 @@
#include "xhci.h"
#include "xhci-trace.h"
+#include "xhci-mtk.h"
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
@@ -634,7 +635,11 @@
"// Set the interrupt modulation register");
temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
- temp |= (u32) 160;
+ /*
+ * the increment interval is 8 times as much as that defined
+ * in xHCI spec on MTK's controller
+ */
+ temp |= (u32) ((xhci->quirks & XHCI_MTK_HOST) ? 20 : 160);
writel(temp, &xhci->ir_set->irq_control);
/* Set the HCD state before we enable the irqs */
@@ -1698,6 +1703,9 @@
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+ if (xhci->quirks & XHCI_MTK_HOST)
+ xhci_mtk_drop_ep_quirk(hcd, udev, ep);
+
xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
@@ -1793,6 +1801,15 @@
return -ENOMEM;
}
+ if (xhci->quirks & XHCI_MTK_HOST) {
+ ret = xhci_mtk_add_ep_quirk(hcd, udev, ep);
+ if (ret < 0) {
+ xhci_free_or_cache_endpoint_ring(xhci,
+ virt_dev, ep_index);
+ return ret;
+ }
+ }
+
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
@@ -4960,7 +4977,7 @@
static const struct hc_driver xhci_hc_driver = {
.description = "xhci-hcd",
.product_desc = "xHCI Host Controller",
- .hcd_priv_size = sizeof(struct xhci_hcd *),
+ .hcd_priv_size = sizeof(struct xhci_hcd),
/*
* generic hardware linkage
@@ -5059,6 +5076,10 @@
BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
+
+ if (usb_disabled())
+ return -ENODEV;
+
return 0;
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 0b94512..9be7348 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1630,6 +1630,7 @@
/* For controllers with a broken beyond repair streams implementation */
#define XHCI_BROKEN_STREAMS (1 << 19)
#define XHCI_PME_STUCK_QUIRK (1 << 20)
+#define XHCI_MTK_HOST (1 << 21)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
@@ -1656,6 +1657,9 @@
u32 port_status_u0;
/* Compliance Mode Timer Triggered every 2 seconds */
#define COMP_MODE_RCVRY_MSECS 2000
+
+ /* platform-specific data -- must come last */
+ unsigned long priv[0] __aligned(sizeof(s64));
};
/* Platform specific overrides to generic XHCI hc_driver ops */
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 637f3f7..92fdb6e 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -22,18 +22,42 @@
/*-------------------------------------------------------------------------*/
/* FIXME make these public somewhere; usbdevfs.h? */
-struct usbtest_param {
+
+/* Parameter for usbtest driver. */
+struct usbtest_param_32 {
/* inputs */
- unsigned test_num; /* 0..(TEST_CASES-1) */
- unsigned iterations;
- unsigned length;
- unsigned vary;
- unsigned sglen;
+ __u32 test_num; /* 0..(TEST_CASES-1) */
+ __u32 iterations;
+ __u32 length;
+ __u32 vary;
+ __u32 sglen;
/* outputs */
- struct timeval duration;
+ __s32 duration_sec;
+ __s32 duration_usec;
};
-#define USBTEST_REQUEST _IOWR('U', 100, struct usbtest_param)
+
+/*
+ * Compat parameter to the usbtest driver.
+ * This supports older user space binaries compiled with 64 bit compiler.
+ */
+struct usbtest_param_64 {
+ /* inputs */
+ __u32 test_num; /* 0..(TEST_CASES-1) */
+ __u32 iterations;
+ __u32 length;
+ __u32 vary;
+ __u32 sglen;
+
+ /* outputs */
+ __s64 duration_sec;
+ __s64 duration_usec;
+};
+
+/* IOCTL interface to the driver. */
+#define USBTEST_REQUEST_32 _IOWR('U', 100, struct usbtest_param_32)
+/* COMPAT IOCTL interface to the driver. */
+#define USBTEST_REQUEST_64 _IOWR('U', 100, struct usbtest_param_64)
/*-------------------------------------------------------------------------*/
@@ -1030,7 +1054,7 @@
unsigned pending;
int status;
struct urb **urb;
- struct usbtest_param *param;
+ struct usbtest_param_32 *param;
int last;
};
@@ -1155,7 +1179,7 @@
}
static int
-test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
+test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param)
{
struct usb_device *udev = testdev_to_usbdev(dev);
struct urb **urb;
@@ -1849,7 +1873,7 @@
goto done;
default:
dev_err(&ctx->dev->intf->dev,
- "iso resubmit err %d\n",
+ "resubmit err %d\n",
status);
/* FALLTHROUGH */
case -ENODEV: /* disconnected */
@@ -1863,7 +1887,7 @@
if (ctx->pending == 0) {
if (ctx->errors)
dev_err(&ctx->dev->intf->dev,
- "iso test, %lu errors out of %lu\n",
+ "during the test, %lu errors out of %lu\n",
ctx->errors, ctx->packet_count);
complete(&ctx->done);
}
@@ -1930,7 +1954,7 @@
}
static int
-test_queue(struct usbtest_dev *dev, struct usbtest_param *param,
+test_queue(struct usbtest_dev *dev, struct usbtest_param_32 *param,
int pipe, struct usb_endpoint_descriptor *desc, unsigned offset)
{
struct transfer_context context;
@@ -2049,81 +2073,20 @@
return retval;
}
-/*-------------------------------------------------------------------------*/
-
-/* We only have this one interface to user space, through usbfs.
- * User mode code can scan usbfs to find N different devices (maybe on
- * different busses) to use when testing, and allocate one thread per
- * test. So discovery is simplified, and we have no device naming issues.
- *
- * Don't use these only as stress/load tests. Use them along with with
- * other USB bus activity: plugging, unplugging, mousing, mp3 playback,
- * video capture, and so on. Run different tests at different times, in
- * different sequences. Nothing here should interact with other devices,
- * except indirectly by consuming USB bandwidth and CPU resources for test
- * threads and request completion. But the only way to know that for sure
- * is to test when HC queues are in use by many devices.
- *
- * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(),
- * it locks out usbcore in certain code paths. Notably, if you disconnect
- * the device-under-test, hub_wq will wait block forever waiting for the
- * ioctl to complete ... so that usb_disconnect() can abort the pending
- * urbs and then call usbtest_disconnect(). To abort a test, you're best
- * off just killing the userspace task and waiting for it to exit.
- */
-
+/* Run tests. */
static int
-usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
+usbtest_do_ioctl(struct usb_interface *intf, struct usbtest_param_32 *param)
{
struct usbtest_dev *dev = usb_get_intfdata(intf);
struct usb_device *udev = testdev_to_usbdev(dev);
- struct usbtest_param *param = buf;
- int retval = -EOPNOTSUPP;
struct urb *urb;
struct scatterlist *sg;
struct usb_sg_request req;
- struct timeval start;
unsigned i;
-
- /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
-
- pattern = mod_pattern;
-
- if (code != USBTEST_REQUEST)
- return -EOPNOTSUPP;
+ int retval = -EOPNOTSUPP;
if (param->iterations <= 0)
return -EINVAL;
-
- if (param->sglen > MAX_SGLEN)
- return -EINVAL;
-
- if (mutex_lock_interruptible(&dev->lock))
- return -ERESTARTSYS;
-
- /* FIXME: What if a system sleep starts while a test is running? */
-
- /* some devices, like ez-usb default devices, need a non-default
- * altsetting to have any active endpoints. some tests change
- * altsettings; force a default so most tests don't need to check.
- */
- if (dev->info->alt >= 0) {
- int res;
-
- if (intf->altsetting->desc.bInterfaceNumber) {
- mutex_unlock(&dev->lock);
- return -ENODEV;
- }
- res = set_altsetting(dev, dev->info->alt);
- if (res) {
- dev_err(&intf->dev,
- "set altsetting to %d failed, %d\n",
- dev->info->alt, res);
- mutex_unlock(&dev->lock);
- return res;
- }
- }
-
/*
* Just a bunch of test cases that every HCD is expected to handle.
*
@@ -2133,7 +2096,6 @@
* FIXME add more tests! cancel requests, verify the data, control
* queueing, concurrent read+write threads, and so on.
*/
- do_gettimeofday(&start);
switch (param->test_num) {
case 0:
@@ -2548,13 +2510,116 @@
dev->in_pipe, NULL, 0);
break;
}
- do_gettimeofday(¶m->duration);
- param->duration.tv_sec -= start.tv_sec;
- param->duration.tv_usec -= start.tv_usec;
- if (param->duration.tv_usec < 0) {
- param->duration.tv_usec += 1000 * 1000;
- param->duration.tv_sec -= 1;
+ return retval;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* We only have this one interface to user space, through usbfs.
+ * User mode code can scan usbfs to find N different devices (maybe on
+ * different busses) to use when testing, and allocate one thread per
+ * test. So discovery is simplified, and we have no device naming issues.
+ *
+ * Don't use these only as stress/load tests. Use them along with with
+ * other USB bus activity: plugging, unplugging, mousing, mp3 playback,
+ * video capture, and so on. Run different tests at different times, in
+ * different sequences. Nothing here should interact with other devices,
+ * except indirectly by consuming USB bandwidth and CPU resources for test
+ * threads and request completion. But the only way to know that for sure
+ * is to test when HC queues are in use by many devices.
+ *
+ * WARNING: Because usbfs grabs udev->dev.sem before calling this ioctl(),
+ * it locks out usbcore in certain code paths. Notably, if you disconnect
+ * the device-under-test, hub_wq will wait block forever waiting for the
+ * ioctl to complete ... so that usb_disconnect() can abort the pending
+ * urbs and then call usbtest_disconnect(). To abort a test, you're best
+ * off just killing the userspace task and waiting for it to exit.
+ */
+
+static int
+usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
+{
+
+ struct usbtest_dev *dev = usb_get_intfdata(intf);
+ struct usbtest_param_64 *param_64 = buf;
+ struct usbtest_param_32 temp;
+ struct usbtest_param_32 *param_32 = buf;
+ struct timespec64 start;
+ struct timespec64 end;
+ struct timespec64 duration;
+ int retval = -EOPNOTSUPP;
+
+ /* FIXME USBDEVFS_CONNECTINFO doesn't say how fast the device is. */
+
+ pattern = mod_pattern;
+
+ if (mutex_lock_interruptible(&dev->lock))
+ return -ERESTARTSYS;
+
+ /* FIXME: What if a system sleep starts while a test is running? */
+
+ /* some devices, like ez-usb default devices, need a non-default
+ * altsetting to have any active endpoints. some tests change
+ * altsettings; force a default so most tests don't need to check.
+ */
+ if (dev->info->alt >= 0) {
+ if (intf->altsetting->desc.bInterfaceNumber) {
+ retval = -ENODEV;
+ goto free_mutex;
+ }
+ retval = set_altsetting(dev, dev->info->alt);
+ if (retval) {
+ dev_err(&intf->dev,
+ "set altsetting to %d failed, %d\n",
+ dev->info->alt, retval);
+ goto free_mutex;
+ }
}
+
+ switch (code) {
+ case USBTEST_REQUEST_64:
+ temp.test_num = param_64->test_num;
+ temp.iterations = param_64->iterations;
+ temp.length = param_64->length;
+ temp.sglen = param_64->sglen;
+ temp.vary = param_64->vary;
+ param_32 = &temp;
+ break;
+
+ case USBTEST_REQUEST_32:
+ break;
+
+ default:
+ retval = -EOPNOTSUPP;
+ goto free_mutex;
+ }
+
+ ktime_get_ts64(&start);
+
+ retval = usbtest_do_ioctl(intf, param_32);
+ if (retval)
+ goto free_mutex;
+
+ ktime_get_ts64(&end);
+
+ duration = timespec64_sub(end, start);
+
+ temp.duration_sec = duration.tv_sec;
+ temp.duration_usec = duration.tv_nsec/NSEC_PER_USEC;
+
+ switch (code) {
+ case USBTEST_REQUEST_32:
+ param_32->duration_sec = temp.duration_sec;
+ param_32->duration_usec = temp.duration_usec;
+ break;
+
+ case USBTEST_REQUEST_64:
+ param_64->duration_sec = temp.duration_sec;
+ param_64->duration_usec = temp.duration_usec;
+ break;
+ }
+
+free_mutex:
mutex_unlock(&dev->lock);
return retval;
}
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 3598f1a..1a874a1 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -18,6 +18,7 @@
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
+#include <linux/time64.h>
#include <asm/uaccess.h>
@@ -92,8 +93,8 @@
unsigned short busnum; /* Bus number */
char flag_setup;
char flag_data;
- s64 ts_sec; /* gettimeofday */
- s32 ts_usec; /* gettimeofday */
+ s64 ts_sec; /* getnstimeofday64 */
+ s32 ts_usec; /* getnstimeofday64 */
int status;
unsigned int len_urb; /* Length of data (submitted or actual) */
unsigned int len_cap; /* Delivered length */
@@ -483,7 +484,7 @@
char ev_type, int status)
{
const struct usb_endpoint_descriptor *epd = &urb->ep->desc;
- struct timeval ts;
+ struct timespec64 ts;
unsigned long flags;
unsigned int urb_length;
unsigned int offset;
@@ -494,7 +495,7 @@
struct mon_bin_hdr *ep;
char data_tag = 0;
- do_gettimeofday(&ts);
+ getnstimeofday64(&ts);
spin_lock_irqsave(&rp->b_lock, flags);
@@ -568,7 +569,7 @@
ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->ts_sec = ts.tv_sec;
- ep->ts_usec = ts.tv_usec;
+ ep->ts_usec = ts.tv_nsec / NSEC_PER_USEC;
ep->status = status;
ep->len_urb = urb_length;
ep->len_cap = length + lendesc;
@@ -629,12 +630,12 @@
static void mon_bin_error(void *data, struct urb *urb, int error)
{
struct mon_reader_bin *rp = data;
- struct timeval ts;
+ struct timespec64 ts;
unsigned long flags;
unsigned int offset;
struct mon_bin_hdr *ep;
- do_gettimeofday(&ts);
+ getnstimeofday64(&ts);
spin_lock_irqsave(&rp->b_lock, flags);
@@ -656,7 +657,7 @@
ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->ts_sec = ts.tv_sec;
- ep->ts_usec = ts.tv_usec;
+ ep->ts_usec = ts.tv_nsec / NSEC_PER_USEC;
ep->status = error;
ep->flag_setup = '-';
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index f7c292f..fec3f11 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -241,7 +241,7 @@
/*
* Ops
*/
-static struct usb_mon_operations mon_ops_0 = {
+static const struct usb_mon_operations mon_ops_0 = {
.urb_submit = mon_submit,
.urb_submit_error = mon_submit_error,
.urb_complete = mon_complete,
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index ad40825..98e4f63 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -9,6 +9,7 @@
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/time.h>
+#include <linux/ktime.h>
#include <linux/export.h>
#include <linux/mutex.h>
#include <linux/debugfs.h>
@@ -176,12 +177,12 @@
static inline unsigned int mon_get_timestamp(void)
{
- struct timeval tval;
+ struct timespec64 now;
unsigned int stamp;
- do_gettimeofday(&tval);
- stamp = tval.tv_sec & 0xFFF; /* 2^32 = 4294967296. Limit to 4096s. */
- stamp = stamp * 1000000 + tval.tv_usec;
+ ktime_get_ts64(&now);
+ stamp = now.tv_sec & 0xFFF; /* 2^32 = 4294967296. Limit to 4096s. */
+ stamp = stamp * USEC_PER_SEC + now.tv_nsec / NSEC_PER_USEC;
return stamp;
}
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 5c66d3f..9ff9404 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -49,18 +49,18 @@
};
enum {
- SUBMIT_STATUS_URB = (1 << 1),
- ALLOC_DATA_IN_URB = (1 << 2),
- SUBMIT_DATA_IN_URB = (1 << 3),
- ALLOC_DATA_OUT_URB = (1 << 4),
- SUBMIT_DATA_OUT_URB = (1 << 5),
- ALLOC_CMD_URB = (1 << 6),
- SUBMIT_CMD_URB = (1 << 7),
- COMMAND_INFLIGHT = (1 << 8),
- DATA_IN_URB_INFLIGHT = (1 << 9),
- DATA_OUT_URB_INFLIGHT = (1 << 10),
- COMMAND_ABORTED = (1 << 11),
- IS_IN_WORK_LIST = (1 << 12),
+ SUBMIT_STATUS_URB = BIT(1),
+ ALLOC_DATA_IN_URB = BIT(2),
+ SUBMIT_DATA_IN_URB = BIT(3),
+ ALLOC_DATA_OUT_URB = BIT(4),
+ SUBMIT_DATA_OUT_URB = BIT(5),
+ ALLOC_CMD_URB = BIT(6),
+ SUBMIT_CMD_URB = BIT(7),
+ COMMAND_INFLIGHT = BIT(8),
+ DATA_IN_URB_INFLIGHT = BIT(9),
+ DATA_OUT_URB_INFLIGHT = BIT(10),
+ COMMAND_ABORTED = BIT(11),
+ IS_IN_WORK_LIST = BIT(12),
};
/* Overrides scsi_pointer */
@@ -74,7 +74,7 @@
/* I hate forward declarations, but I actually have a loop */
static int uas_submit_urbs(struct scsi_cmnd *cmnd,
- struct uas_dev_info *devinfo, gfp_t gfp);
+ struct uas_dev_info *devinfo);
static void uas_do_work(struct work_struct *work);
static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
static void uas_free_streams(struct uas_dev_info *devinfo);
@@ -105,7 +105,7 @@
if (!(cmdinfo->state & IS_IN_WORK_LIST))
continue;
- err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
+ err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
if (!err)
cmdinfo->state &= ~IS_IN_WORK_LIST;
else
@@ -240,7 +240,7 @@
int err;
cmdinfo->state |= direction | SUBMIT_STATUS_URB;
- err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
+ err = uas_submit_urbs(cmnd, cmnd->device->hostdata);
if (err) {
uas_add_work(cmdinfo);
}
@@ -512,7 +512,7 @@
}
static int uas_submit_urbs(struct scsi_cmnd *cmnd,
- struct uas_dev_info *devinfo, gfp_t gfp)
+ struct uas_dev_info *devinfo)
{
struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
struct urb *urb;
@@ -520,14 +520,14 @@
lockdep_assert_held(&devinfo->lock);
if (cmdinfo->state & SUBMIT_STATUS_URB) {
- urb = uas_submit_sense_urb(cmnd, gfp);
+ urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
if (!urb)
return SCSI_MLQUEUE_DEVICE_BUSY;
cmdinfo->state &= ~SUBMIT_STATUS_URB;
}
if (cmdinfo->state & ALLOC_DATA_IN_URB) {
- cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
+ cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
cmnd, DMA_FROM_DEVICE);
if (!cmdinfo->data_in_urb)
return SCSI_MLQUEUE_DEVICE_BUSY;
@@ -536,7 +536,7 @@
if (cmdinfo->state & SUBMIT_DATA_IN_URB) {
usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs);
- err = usb_submit_urb(cmdinfo->data_in_urb, gfp);
+ err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC);
if (err) {
usb_unanchor_urb(cmdinfo->data_in_urb);
uas_log_cmd_state(cmnd, "data in submit err", err);
@@ -547,7 +547,7 @@
}
if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
- cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
+ cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
cmnd, DMA_TO_DEVICE);
if (!cmdinfo->data_out_urb)
return SCSI_MLQUEUE_DEVICE_BUSY;
@@ -556,7 +556,7 @@
if (cmdinfo->state & SUBMIT_DATA_OUT_URB) {
usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs);
- err = usb_submit_urb(cmdinfo->data_out_urb, gfp);
+ err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC);
if (err) {
usb_unanchor_urb(cmdinfo->data_out_urb);
uas_log_cmd_state(cmnd, "data out submit err", err);
@@ -567,7 +567,7 @@
}
if (cmdinfo->state & ALLOC_CMD_URB) {
- cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd);
+ cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
if (!cmdinfo->cmd_urb)
return SCSI_MLQUEUE_DEVICE_BUSY;
cmdinfo->state &= ~ALLOC_CMD_URB;
@@ -575,7 +575,7 @@
if (cmdinfo->state & SUBMIT_CMD_URB) {
usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs);
- err = usb_submit_urb(cmdinfo->cmd_urb, gfp);
+ err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC);
if (err) {
usb_unanchor_urb(cmdinfo->cmd_urb);
uas_log_cmd_state(cmnd, "cmd submit err", err);
@@ -653,7 +653,7 @@
if (!devinfo->use_streams)
cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB);
- err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
+ err = uas_submit_urbs(cmnd, devinfo);
if (err) {
/* If we did nothing, give up now */
if (cmdinfo->state & SUBMIT_STATUS_URB) {
diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c
index bdcb13c..01c20a2 100644
--- a/drivers/uwb/uwbd.c
+++ b/drivers/uwb/uwbd.c
@@ -279,7 +279,6 @@
HZ);
if (should_stop)
break;
- try_to_freeze();
spin_lock_irqsave(&rc->uwbd.event_list_lock, flags);
if (!list_empty(&rc->uwbd.event_list)) {
diff --git a/include/linux/usb.h b/include/linux/usb.h
index b9a2807..89533ba 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -510,7 +510,8 @@
* @usb2_hw_lpm_besl_capable: device can perform USB2 hardware BESL LPM
* @usb2_hw_lpm_enabled: USB2 hardware LPM is enabled
* @usb2_hw_lpm_allowed: Userspace allows USB 2.0 LPM to be enabled
- * @usb3_lpm_enabled: USB3 hardware LPM enabled
+ * @usb3_lpm_u1_enabled: USB3 hardware U1 LPM enabled
+ * @usb3_lpm_u2_enabled: USB3 hardware U2 LPM enabled
* @string_langid: language ID for strings
* @product: iProduct string, if present (static)
* @manufacturer: iManufacturer string, if present (static)
@@ -583,7 +584,8 @@
unsigned usb2_hw_lpm_besl_capable:1;
unsigned usb2_hw_lpm_enabled:1;
unsigned usb2_hw_lpm_allowed:1;
- unsigned usb3_lpm_enabled:1;
+ unsigned usb3_lpm_u1_enabled:1;
+ unsigned usb3_lpm_u2_enabled:1;
int string_langid;
/* static strings from the device */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index f89c24b..4dcf844 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -660,7 +660,7 @@
/* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
};
-extern struct usb_mon_operations *mon_ops;
+extern const struct usb_mon_operations *mon_ops;
static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
{
@@ -682,7 +682,7 @@
(*mon_ops->urb_complete)(bus, urb, status);
}
-int usb_mon_register(struct usb_mon_operations *ops);
+int usb_mon_register(const struct usb_mon_operations *ops);
void usb_mon_deregister(void);
#else