| /* |
| * Remote Controller core header |
| * |
| * Copyright (C) 2009-2010 by Mauro Carvalho Chehab |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _RC_CORE |
| #define _RC_CORE |
| |
| #include <linux/spinlock.h> |
| #include <linux/kfifo.h> |
| #include <linux/time.h> |
| #include <linux/timer.h> |
| #include <media/rc-map.h> |
| |
| extern int rc_core_debug; |
| #define IR_dprintk(level, fmt, ...) \ |
| do { \ |
| if (rc_core_debug >= level) \ |
| printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ |
| } while (0) |
| |
| enum rc_driver_type { |
| RC_DRIVER_SCANCODE = 0, /* Driver or hardware generates a scancode */ |
| RC_DRIVER_IR_RAW, /* Needs a Infra-Red pulse/space decoder */ |
| }; |
| |
| /** |
| * struct rc_scancode_filter - Filter scan codes. |
| * @data: Scancode data to match. |
| * @mask: Mask of bits of scancode to compare. |
| */ |
| struct rc_scancode_filter { |
| u32 data; |
| u32 mask; |
| }; |
| |
| /** |
| * enum rc_filter_type - Filter type constants. |
| * @RC_FILTER_NORMAL: Filter for normal operation. |
| * @RC_FILTER_WAKEUP: Filter for waking from suspend. |
| * @RC_FILTER_MAX: Number of filter types. |
| */ |
| enum rc_filter_type { |
| RC_FILTER_NORMAL = 0, |
| RC_FILTER_WAKEUP, |
| |
| RC_FILTER_MAX |
| }; |
| |
| /** |
| * struct rc_dev - represents a remote control device |
| * @dev: driver model's view of this device |
| * @sysfs_groups: sysfs attribute groups |
| * @input_name: name of the input child device |
| * @input_phys: physical path to the input child device |
| * @input_id: id of the input child device (struct input_id) |
| * @driver_name: name of the hardware driver which registered this device |
| * @map_name: name of the default keymap |
| * @rc_map: current scan/key table |
| * @lock: used to ensure we've filled in all protocol details before |
| * anyone can call show_protocols or store_protocols |
| * @devno: unique remote control device number |
| * @raw: additional data for raw pulse/space devices |
| * @input_dev: the input child device used to communicate events to userspace |
| * @driver_type: specifies if protocol decoding is done in hardware or software |
| * @idle: used to keep track of RX state |
| * @allowed_protocols: bitmask with the supported RC_BIT_* protocols |
| * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols |
| * @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols |
| * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols |
| * @scancode_filter: scancode filter |
| * @scancode_wakeup_filter: scancode wakeup filters |
| * @scancode_mask: some hardware decoders are not capable of providing the full |
| * scancode to the application. As this is a hardware limit, we can't do |
| * anything with it. Yet, as the same keycode table can be used with other |
| * devices, a mask is provided to allow its usage. Drivers should generally |
| * leave this field in blank |
| * @users: number of current users of the device |
| * @priv: driver-specific data |
| * @keylock: protects the remaining members of the struct |
| * @keypressed: whether a key is currently pressed |
| * @keyup_jiffies: time (in jiffies) when the current keypress should be released |
| * @timer_keyup: timer for releasing a keypress |
| * @last_keycode: keycode of last keypress |
| * @last_protocol: protocol of last keypress |
| * @last_scancode: scancode of last keypress |
| * @last_toggle: toggle value of last command |
| * @timeout: optional time after which device stops sending data |
| * @min_timeout: minimum timeout supported by device |
| * @max_timeout: maximum timeout supported by device |
| * @rx_resolution : resolution (in ns) of input sampler |
| * @tx_resolution: resolution (in ns) of output sampler |
| * @change_protocol: allow changing the protocol used on hardware decoders |
| * @change_wakeup_protocol: allow changing the protocol used for wakeup |
| * filtering |
| * @open: callback to allow drivers to enable polling/irq when IR input device |
| * is opened. |
| * @close: callback to allow drivers to disable polling/irq when IR input device |
| * is opened. |
| * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) |
| * @s_tx_carrier: set transmit carrier frequency |
| * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) |
| * @s_rx_carrier: inform driver about carrier it is expected to handle |
| * @tx_ir: transmit IR |
| * @s_idle: enable/disable hardware idle mode, upon which, |
| * device doesn't interrupt host until it sees IR pulses |
| * @s_learning_mode: enable wide band receiver used for learning |
| * @s_carrier_report: enable carrier reports |
| * @s_filter: set the scancode filter |
| * @s_wakeup_filter: set the wakeup scancode filter |
| */ |
| struct rc_dev { |
| struct device dev; |
| const struct attribute_group *sysfs_groups[5]; |
| const char *input_name; |
| const char *input_phys; |
| struct input_id input_id; |
| char *driver_name; |
| const char *map_name; |
| struct rc_map rc_map; |
| struct mutex lock; |
| unsigned long devno; |
| struct ir_raw_event_ctrl *raw; |
| struct input_dev *input_dev; |
| enum rc_driver_type driver_type; |
| bool idle; |
| u64 allowed_protocols; |
| u64 enabled_protocols; |
| u64 allowed_wakeup_protocols; |
| u64 enabled_wakeup_protocols; |
| struct rc_scancode_filter scancode_filter; |
| struct rc_scancode_filter scancode_wakeup_filter; |
| u32 scancode_mask; |
| u32 users; |
| void *priv; |
| spinlock_t keylock; |
| bool keypressed; |
| unsigned long keyup_jiffies; |
| struct timer_list timer_keyup; |
| u32 last_keycode; |
| enum rc_type last_protocol; |
| u32 last_scancode; |
| u8 last_toggle; |
| u32 timeout; |
| u32 min_timeout; |
| u32 max_timeout; |
| u32 rx_resolution; |
| u32 tx_resolution; |
| int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); |
| int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type); |
| int (*open)(struct rc_dev *dev); |
| void (*close)(struct rc_dev *dev); |
| int (*s_tx_mask)(struct rc_dev *dev, u32 mask); |
| int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); |
| int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); |
| int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); |
| int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); |
| void (*s_idle)(struct rc_dev *dev, bool enable); |
| int (*s_learning_mode)(struct rc_dev *dev, int enable); |
| int (*s_carrier_report) (struct rc_dev *dev, int enable); |
| int (*s_filter)(struct rc_dev *dev, |
| struct rc_scancode_filter *filter); |
| int (*s_wakeup_filter)(struct rc_dev *dev, |
| struct rc_scancode_filter *filter); |
| }; |
| |
| #define to_rc_dev(d) container_of(d, struct rc_dev, dev) |
| |
| /* |
| * From rc-main.c |
| * Those functions can be used on any type of Remote Controller. They |
| * basically creates an input_dev and properly reports the device as a |
| * Remote Controller, at sys/class/rc. |
| */ |
| |
| struct rc_dev *rc_allocate_device(void); |
| void rc_free_device(struct rc_dev *dev); |
| int rc_register_device(struct rc_dev *dev); |
| void rc_unregister_device(struct rc_dev *dev); |
| |
| int rc_open(struct rc_dev *rdev); |
| void rc_close(struct rc_dev *rdev); |
| |
| void rc_repeat(struct rc_dev *dev); |
| void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle); |
| void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle); |
| void rc_keyup(struct rc_dev *dev); |
| u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode); |
| |
| /* |
| * From rc-raw.c |
| * The Raw interface is specific to InfraRed. It may be a good idea to |
| * split it later into a separate header. |
| */ |
| |
| enum raw_event_type { |
| IR_SPACE = (1 << 0), |
| IR_PULSE = (1 << 1), |
| IR_START_EVENT = (1 << 2), |
| IR_STOP_EVENT = (1 << 3), |
| }; |
| |
| struct ir_raw_event { |
| union { |
| u32 duration; |
| |
| struct { |
| u32 carrier; |
| u8 duty_cycle; |
| }; |
| }; |
| |
| unsigned pulse:1; |
| unsigned reset:1; |
| unsigned timeout:1; |
| unsigned carrier_report:1; |
| }; |
| |
| #define DEFINE_IR_RAW_EVENT(event) \ |
| struct ir_raw_event event = { \ |
| { .duration = 0 } , \ |
| .pulse = 0, \ |
| .reset = 0, \ |
| .timeout = 0, \ |
| .carrier_report = 0 } |
| |
| static inline void init_ir_raw_event(struct ir_raw_event *ev) |
| { |
| memset(ev, 0, sizeof(*ev)); |
| } |
| |
| #define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */ |
| #define US_TO_NS(usec) ((usec) * 1000) |
| #define MS_TO_US(msec) ((msec) * 1000) |
| #define MS_TO_NS(msec) ((msec) * 1000 * 1000) |
| |
| void ir_raw_event_handle(struct rc_dev *dev); |
| int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); |
| int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); |
| int ir_raw_event_store_with_filter(struct rc_dev *dev, |
| struct ir_raw_event *ev); |
| void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); |
| |
| static inline void ir_raw_event_reset(struct rc_dev *dev) |
| { |
| DEFINE_IR_RAW_EVENT(ev); |
| ev.reset = true; |
| |
| ir_raw_event_store(dev, &ev); |
| ir_raw_event_handle(dev); |
| } |
| |
| /* extract mask bits out of data and pack them into the result */ |
| static inline u32 ir_extract_bits(u32 data, u32 mask) |
| { |
| u32 vbit = 1, value = 0; |
| |
| do { |
| if (mask & 1) { |
| if (data & 1) |
| value |= vbit; |
| vbit <<= 1; |
| } |
| data >>= 1; |
| } while (mask >>= 1); |
| |
| return value; |
| } |
| |
| #endif /* _RC_CORE */ |