Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (23 commits)
USB Elan FTDI: check for workqueue creation
USB: fix spinlock recursion in cdc-acm.c
USB: fix Unaligned access in EHCI driver
USB: Product ID for FT232RL in ftdi_sio
USBNET: DM9501: Add Corega FEther USB-TXC support.
USB: ipaq.c: Additional devices
USB: further fix for usb-serial
USB: fix usb-serial device naming bug
USB: RTS/DTR signal patch for airprime driver
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer
usb-serial: fix shutdown / device_unregister order
USB: add Additional PIDs in ftdi_sio
USB: add QL355P power supply ids to fdti_sio
USB: New device IDs for cp2101 driver
USB: kill dead code from hub.c
USB: ratelimit debounce error messages
USB: pxa2xx_udc: fix hardcoded irq number
UHCI: fix port resume problem
USB: set the correct interval for interrupt URBs
USB: goku_udc: Remove crude cache coherency code
...
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index d38a25f..31ae661 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -332,9 +332,9 @@
if (!ACM_READY(acm))
return;
- spin_lock(&acm->throttle_lock);
+ spin_lock_irqsave(&acm->throttle_lock, flags);
throttled = acm->throttle;
- spin_unlock(&acm->throttle_lock);
+ spin_unlock_irqrestore(&acm->throttle_lock, flags);
if (throttled)
return;
@@ -352,9 +352,9 @@
dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
tty_buffer_request_room(tty, buf->size);
- spin_lock(&acm->throttle_lock);
+ spin_lock_irqsave(&acm->throttle_lock, flags);
throttled = acm->throttle;
- spin_unlock(&acm->throttle_lock);
+ spin_unlock_irqrestore(&acm->throttle_lock, flags);
if (!throttled)
tty_insert_flip_string(tty, buf->base, buf->size);
tty_flip_buffer_push(tty);
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 274f14f..36e7a84 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -912,7 +912,7 @@
struct async *as;
struct usb_ctrlrequest *dr = NULL;
unsigned int u, totlen, isofrmlen;
- int ret, interval = 0, ifnum = -1;
+ int ret, ifnum = -1;
if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP|USBDEVFS_URB_SHORT_NOT_OK|
URB_NO_FSBR|URB_ZERO_PACKET))
@@ -992,7 +992,6 @@
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_ISOC)
return -EINVAL;
- interval = 1 << min (15, ep->desc.bInterval - 1);
isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * uurb->number_of_packets;
if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL)))
return -ENOMEM;
@@ -1021,10 +1020,6 @@
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
!= USB_ENDPOINT_XFER_INT)
return -EINVAL;
- if (ps->dev->speed == USB_SPEED_HIGH)
- interval = 1 << min (15, ep->desc.bInterval - 1);
- else
- interval = ep->desc.bInterval;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
if (!access_ok((uurb->endpoint & USB_DIR_IN) ? VERIFY_WRITE : VERIFY_READ, uurb->buffer, uurb->buffer_length))
@@ -1053,7 +1048,11 @@
as->urb->setup_packet = (unsigned char*)dr;
as->urb->start_frame = uurb->start_frame;
as->urb->number_of_packets = uurb->number_of_packets;
- as->urb->interval = interval;
+ if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
+ ps->dev->speed == USB_SPEED_HIGH)
+ as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
+ else
+ as->urb->interval = ep->desc.bInterval;
as->urb->context = as;
as->urb->complete = async_completed;
for (totlen = u = 0; u < uurb->number_of_packets; u++) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4140074..b89a98e 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1281,12 +1281,6 @@
{
int err;
- /* Lock ourself into memory in order to keep a probe sequence
- * sleeping in a new thread from allowing us to be unloaded.
- */
- if (!try_module_get(THIS_MODULE))
- return -EINVAL;
-
/* Determine quirks */
usb_detect_quirks(udev);
@@ -1390,7 +1384,6 @@
usb_autoresume_device(udev->parent);
exit:
- module_put(THIS_MODULE);
return err;
fail:
@@ -2443,7 +2436,7 @@
if (portchange & USB_PORT_STAT_C_CONNECTION) {
status = hub_port_debounce(hub, port1);
- if (status < 0) {
+ if (status < 0 && printk_ratelimit()) {
dev_err (hub_dev,
"connect-debounce failed, port %d disabled\n",
port1);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2f17468..217a3d6 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -221,10 +221,15 @@
if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_INT) {
+ int interval;
+
+ if (usb_dev->speed == USB_SPEED_HIGH)
+ interval = 1 << min(15, ep->desc.bInterval - 1);
+ else
+ interval = ep->desc.bInterval;
pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
usb_fill_int_urb(urb, usb_dev, pipe, data, len,
- usb_api_blocking_completion, NULL,
- ep->desc.bInterval);
+ usb_api_blocking_completion, NULL, interval);
} else
usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
usb_api_blocking_completion, NULL);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index a467780..2a6e316 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1835,7 +1835,7 @@
#define at91udc_resume NULL
#endif
-static struct platform_driver at91_udc = {
+static struct platform_driver at91_udc_driver = {
.remove = __exit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
.suspend = at91udc_suspend,
@@ -1848,13 +1848,13 @@
static int __init udc_init_module(void)
{
- return platform_driver_probe(&at91_udc, at91udc_probe);
+ return platform_driver_probe(&at91_udc_driver, at91udc_probe);
}
module_init(udc_init_module);
static void __exit udc_exit_module(void)
{
- platform_driver_unregister(&at91_udc);
+ platform_driver_unregister(&at91_udc_driver);
}
module_exit(udc_exit_module);
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index 7b3a326..65c91d3 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -297,27 +297,6 @@
/*-------------------------------------------------------------------------*/
-#undef USE_KMALLOC
-
-/* many common platforms have dma-coherent caches, which means that it's
- * safe to use kmalloc() memory for all i/o buffers without using any
- * cache flushing calls. (unless you're trying to share cache lines
- * between dma and non-dma activities, which is a slow idea in any case.)
- *
- * other platforms need more care, with 2.6 having a moderately general
- * solution except for the common "buffer is smaller than a page" case.
- */
-#if defined(CONFIG_X86)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT)
-#define USE_KMALLOC
-
-#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
-#define USE_KMALLOC
-
-#endif
-
/* allocating buffers this way eliminates dma mapping overhead, which
* on some platforms will mean eliminating a per-io buffer copy. with
* some kinds of system caches, further tweaks may still be needed.
@@ -334,11 +313,6 @@
return NULL;
*dma = DMA_ADDR_INVALID;
-#if defined(USE_KMALLOC)
- retval = kmalloc(bytes, gfp_flags);
- if (retval)
- *dma = virt_to_phys(retval);
-#else
if (ep->dma) {
/* the main problem with this call is that it wastes memory
* on typical 1/N page allocations: it allocates 1-N pages.
@@ -348,7 +322,6 @@
bytes, dma, gfp_flags);
} else
retval = kmalloc(bytes, gfp_flags);
-#endif
return retval;
}
@@ -356,7 +329,6 @@
goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
{
/* free memory into the right allocator */
-#ifndef USE_KMALLOC
if (dma != DMA_ADDR_INVALID) {
struct goku_ep *ep;
@@ -365,7 +337,6 @@
return;
dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
} else
-#endif
kfree (buf);
}
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index f01890d..571f3eb 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2616,7 +2616,7 @@
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, vbus_irq, retval);
- free_irq(IRQ_USB, dev);
+ free_irq(irq, dev);
return -EBUSY;
}
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 9af529d..1813b7ca 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -653,8 +653,7 @@
if (status & ~0xffff) /* only if wPortChange is interesting */
#endif
dbg_port (ehci, "GetStatus", wIndex + 1, temp);
- // we "know" this alignment is good, caller used kmalloc()...
- *((__le32 *) buf) = cpu_to_le32 (status);
+ put_unaligned(cpu_to_le32 (status), (__le32 *) buf);
break;
case SetHubFeature:
switch (wValue) {
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index bacc25c..8e4427a 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -33,6 +33,9 @@
/* status change bits: nonzero writes will clear */
#define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC)
+/* suspend/resume bits: port suspended or port resuming */
+#define SUSPEND_BITS (USBPORTSC_SUSP | USBPORTSC_RD)
+
/* A port that either is connected or has a changed-bit set will prevent
* us from AUTO_STOPPING.
*/
@@ -96,8 +99,8 @@
int status;
int i;
- if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
- CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
+ if (inw(port_addr) & SUSPEND_BITS) {
+ CLR_RH_PORTSTAT(SUSPEND_BITS);
if (test_bit(port, &uhci->resuming_ports))
set_bit(port, &uhci->port_c_suspend);
@@ -107,7 +110,7 @@
* Experiments show that some controllers take longer, so
* we'll poll for completion. */
for (i = 0; i < 10; ++i) {
- if (!(inw(port_addr) & USBPORTSC_RD))
+ if (!(inw(port_addr) & SUSPEND_BITS))
break;
udelay(1);
}
@@ -289,7 +292,7 @@
wPortStatus |= USB_PORT_STAT_CONNECTION;
if (status & USBPORTSC_PE) {
wPortStatus |= USB_PORT_STAT_ENABLE;
- if (status & (USBPORTSC_SUSP | USBPORTSC_RD))
+ if (status & SUSPEND_BITS)
wPortStatus |= USB_PORT_STAT_SUSPEND;
}
if (status & USBPORTSC_OC)
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 0c1d66d..bc3327e 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -2905,17 +2905,31 @@
{
int result;
printk(KERN_INFO "driver %s built at %s on %s\n", ftdi_elan_driver.name,
- __TIME__, __DATE__);
+ __TIME__, __DATE__);
init_MUTEX(&ftdi_module_lock);
INIT_LIST_HEAD(&ftdi_static_list);
status_queue = create_singlethread_workqueue("ftdi-status-control");
+ if (!status_queue)
+ goto err1;
command_queue = create_singlethread_workqueue("ftdi-command-engine");
+ if (!command_queue)
+ goto err2;
respond_queue = create_singlethread_workqueue("ftdi-respond-engine");
+ if (!respond_queue)
+ goto err3;
result = usb_register(&ftdi_elan_driver);
if (result)
printk(KERN_ERR "usb_register failed. Error number %d\n",
- result);
+ result);
return result;
+
+ err3:
+ destroy_workqueue(command_queue);
+ err2:
+ destroy_workqueue(status_queue);
+ err1:
+ printk(KERN_ERR "%s couldn't create workqueue\n", ftdi_elan_driver.name);
+ return -ENOMEM;
}
static void __exit ftdi_elan_exit(void)
diff --git a/drivers/usb/net/dm9601.c b/drivers/usb/net/dm9601.c
index 4a932e1..c0bc52b 100644
--- a/drivers/usb/net/dm9601.c
+++ b/drivers/usb/net/dm9601.c
@@ -571,6 +571,10 @@
static const struct usb_device_id products[] = {
{
+ USB_DEVICE(0x07aa, 0x9601), /* Corega FEther USB-TXC */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
+ {
USB_DEVICE(0x0a46, 0x9601), /* Davicom USB-100 */
.driver_info = (unsigned long)&dm9601_info,
},
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 18816bf..310a8b5 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -44,8 +44,43 @@
int outstanding_urbs;
int throttled;
struct urb *read_urbp[NUM_READ_URBS];
+
+ /* Settings for the port */
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
};
+static int airprime_send_setup(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct airprime_private *priv;
+
+ dbg("%s", __FUNCTION__);
+
+ if (port->number != 0)
+ return 0;
+
+ priv = usb_get_serial_port_data(port);
+
+ if (port->tty) {
+ int val = 0;
+ if (priv->dtr_state)
+ val |= 0x01;
+ if (priv->rts_state)
+ val |= 0x02;
+
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ }
+
+ return 0;
+}
+
static void airprime_read_bulk_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
@@ -118,6 +153,10 @@
usb_set_serial_port_data(port, priv);
}
+ /* Set some sane defaults */
+ priv->rts_state = 1;
+ priv->dtr_state = 1;
+
for (i = 0; i < NUM_READ_URBS; ++i) {
buffer = kmalloc(buffer_size, GFP_KERNEL);
if (!buffer) {
@@ -151,6 +190,9 @@
/* remember this urb so we can kill it when the port is closed */
priv->read_urbp[i] = urb;
}
+
+ airprime_send_setup(port);
+
goto out;
errout:
@@ -176,6 +218,11 @@
dbg("%s - port %d", __FUNCTION__, port->number);
+ priv->rts_state = 0;
+ priv->dtr_state = 0;
+
+ airprime_send_setup(port);
+
for (i = 0; i < NUM_READ_URBS; ++i) {
usb_kill_urb (priv->read_urbp[i]);
kfree (priv->read_urbp[i]->transfer_buffer);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index db623e7..d7d0ba9 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -63,6 +63,8 @@
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c525b42..1633a0fd 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -315,6 +315,7 @@
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
@@ -420,6 +421,14 @@
{ USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
* These will probably use user-space drivers. Uncomment them if
* you need them or use the user-specified vendor/product module
@@ -459,6 +468,7 @@
{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+ { USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -533,6 +543,7 @@
[FT8U232AM] = "FT8U232AM",
[FT232BM] = "FT232BM",
[FT2232C] = "FT2232C",
+ [FT232RL] = "FT232RL",
};
@@ -588,6 +599,8 @@
static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id);
static int ftdi_sio_attach (struct usb_serial *serial);
static void ftdi_shutdown (struct usb_serial *serial);
+static int ftdi_sio_port_probe (struct usb_serial_port *port);
+static int ftdi_sio_port_remove (struct usb_serial_port *port);
static int ftdi_open (struct usb_serial_port *port, struct file *filp);
static void ftdi_close (struct usb_serial_port *port, struct file *filp);
static int ftdi_write (struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -622,6 +635,8 @@
.num_bulk_out = 1,
.num_ports = 1,
.probe = ftdi_sio_probe,
+ .port_probe = ftdi_sio_port_probe,
+ .port_remove = ftdi_sio_port_remove,
.open = ftdi_open,
.close = ftdi_close,
.throttle = ftdi_throttle,
@@ -1024,11 +1039,10 @@
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev;
+ struct usb_device *udev = port->serial->dev;
unsigned short latency = 0;
int rv = 0;
- udev = to_usb_device(dev);
dbg("%s",__FUNCTION__);
@@ -1052,13 +1066,11 @@
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev;
+ struct usb_device *udev = port->serial->dev;
char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- udev = to_usb_device(dev);
-
dbg("%s: setting latency timer = %i", __FUNCTION__, v);
rv = usb_control_msg(udev,
@@ -1083,13 +1095,11 @@
{
struct usb_serial_port *port = to_usb_serial_port(dev);
struct ftdi_private *priv = usb_get_serial_port_data(port);
- struct usb_device *udev;
+ struct usb_device *udev = port->serial->dev;
char buf[1];
int v = simple_strtoul(valbuf, NULL, 10);
int rv = 0;
- udev = to_usb_device(dev);
-
dbg("%s: setting event char = %i", __FUNCTION__, v);
rv = usb_control_msg(udev,
@@ -1110,46 +1120,38 @@
static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);
-static int create_sysfs_attrs(struct usb_serial *serial)
+static int create_sysfs_attrs(struct usb_serial_port *port)
{
- struct ftdi_private *priv;
- struct usb_device *udev;
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
int retval = 0;
dbg("%s",__FUNCTION__);
- priv = usb_get_serial_port_data(serial->port[0]);
- udev = serial->dev;
-
/* XXX I've no idea if the original SIO supports the event_char
* sysfs parameter, so I'm playing it safe. */
if (priv->chip_type != SIO) {
dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
- retval = device_create_file(&udev->dev, &dev_attr_event_char);
+ retval = device_create_file(&port->dev, &dev_attr_event_char);
if ((!retval) &&
(priv->chip_type == FT232BM || priv->chip_type == FT2232C)) {
- retval = device_create_file(&udev->dev,
+ retval = device_create_file(&port->dev,
&dev_attr_latency_timer);
}
}
return retval;
}
-static void remove_sysfs_attrs(struct usb_serial *serial)
+static void remove_sysfs_attrs(struct usb_serial_port *port)
{
- struct ftdi_private *priv;
- struct usb_device *udev;
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s",__FUNCTION__);
- priv = usb_get_serial_port_data(serial->port[0]);
- udev = serial->dev;
-
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
- device_remove_file(&udev->dev, &dev_attr_event_char);
+ device_remove_file(&port->dev, &dev_attr_event_char);
if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
- device_remove_file(&udev->dev, &dev_attr_latency_timer);
+ device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -1169,13 +1171,9 @@
return (0);
}
-/* attach subroutine */
-static int ftdi_sio_attach (struct usb_serial *serial)
+static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
- struct usb_serial_port *port = serial->port[0];
struct ftdi_private *priv;
- struct ftdi_sio_quirk *quirk;
- int retval;
dbg("%s",__FUNCTION__);
@@ -1215,19 +1213,21 @@
kfree(port->bulk_out_buffer);
port->bulk_out_buffer = NULL;
- usb_set_serial_port_data(serial->port[0], priv);
+ usb_set_serial_port_data(port, priv);
- ftdi_determine_type (serial->port[0]);
- retval = create_sysfs_attrs(serial);
- if (retval)
- dev_err(&serial->dev->dev, "Error creating sysfs files, "
- "continuing\n");
+ ftdi_determine_type (port);
+ create_sysfs_attrs(port);
+ return 0;
+}
+/* attach subroutine */
+static int ftdi_sio_attach (struct usb_serial *serial)
+{
/* Check for device requiring special set up. */
- quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
- if (quirk && quirk->setup) {
+ struct ftdi_sio_quirk *quirk = usb_get_serial_data(serial);
+
+ if (quirk && quirk->setup)
quirk->setup(serial);
- }
return 0;
} /* ftdi_sio_attach */
@@ -1271,17 +1271,18 @@
* calls __serial_close for each open of the port
* shutdown is called then (ie ftdi_shutdown)
*/
-
-
static void ftdi_shutdown (struct usb_serial *serial)
-{ /* ftdi_shutdown */
+{
+ dbg("%s", __FUNCTION__);
+}
- struct usb_serial_port *port = serial->port[0];
+static int ftdi_sio_port_remove(struct usb_serial_port *port)
+{
struct ftdi_private *priv = usb_get_serial_port_data(port);
dbg("%s", __FUNCTION__);
- remove_sysfs_attrs(serial);
+ remove_sysfs_attrs(port);
/* all open ports are closed at this point
* (by usbserial.c:__serial_close, which calls ftdi_close)
@@ -1291,8 +1292,9 @@
usb_set_serial_port_data(port, NULL);
kfree(priv);
}
-} /* ftdi_shutdown */
+ return 0;
+}
static int ftdi_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_open */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 1bdda93..513cfe1 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -27,6 +27,7 @@
#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
+#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
@@ -339,6 +340,12 @@
#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
/*
+ * TTi (Thurlby Thandar Instruments)
+ */
+#define TTI_VID 0x103E /* Vendor Id */
+#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
+
+/*
* Definitions for B&B Electronics products.
*/
#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
@@ -497,6 +504,19 @@
#define TELLDUS_VID 0x1781 /* Vendor ID */
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
+/*
+ * IBS elektronik product ids
+ * Submitted by Thomas Schleusener
+ */
+#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
+#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
+#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
+#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
+#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
+#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
+#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
+#define FTDI_IBS_PROD_PID 0xff3f /* future device */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
@@ -620,6 +640,7 @@
FT8U232AM = 2,
FT232BM = 3,
FT2232C = 4,
+ FT232RL = 5,
} ftdi_chip_type_t;
typedef enum {
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index a408184..d16e2e1 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -247,6 +247,8 @@
{ USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */
{ USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */
{ USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */
+ { USB_DEVICE(0x04AD, 0x0306) }, /* GPS Pocket PC USB Sync */
+ { USB_DEVICE(0x04B7, 0x0531) }, /* MyGuide 7000 XL USB Sync */
{ USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */
{ USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 6bf22a2..8511352 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -99,9 +99,12 @@
continue;
*minor = i;
+ j = 0;
dbg("%s - minor base = %d", __FUNCTION__, *minor);
- for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
+ for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i) {
serial_table[i] = serial;
+ serial->port[j++]->number = i;
+ }
spin_unlock(&table_lock);
return serial;
}
@@ -135,11 +138,6 @@
dbg("%s - %s", __FUNCTION__, serial->type->description);
- serial->type->shutdown(serial);
-
- /* return the minor range that this device had */
- return_serial(serial);
-
for (i = 0; i < serial->num_ports; ++i)
serial->port[i]->open_count = 0;
@@ -150,6 +148,12 @@
serial->port[i] = NULL;
}
+ if (serial->type->shutdown)
+ serial->type->shutdown(serial);
+
+ /* return the minor range that this device had */
+ return_serial(serial);
+
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
@@ -826,7 +830,6 @@
num_ports = type->num_ports;
}
- serial->minor = minor;
serial->num_ports = num_ports;
serial->num_bulk_in = num_bulk_in;
serial->num_bulk_out = num_bulk_out;
@@ -847,7 +850,6 @@
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
if (!port)
goto probe_error;
- port->number = i + serial->minor;
port->serial = serial;
spin_lock_init(&port->lock);
mutex_init(&port->mutex);
@@ -980,6 +982,7 @@
dev_err(&interface->dev, "No more free serial devices\n");
goto probe_error;
}
+ serial->minor = minor;
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
@@ -1034,9 +1037,6 @@
kfree(port->interrupt_out_buffer);
}
- /* return the minor range that this device had */
- return_serial (serial);
-
/* free up any memory that we allocated */
for (i = 0; i < serial->num_port_pointers; ++i)
kfree(serial->port[i]);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 9644a8e..2dd31e3 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -146,6 +146,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Andrew Nayenko <relan@bk.ru> */
+UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
+ "Nokia",
+ "Nokia 6288",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Mario Rettig <mariorettig@web.de> */
UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100,
"Nokia",
@@ -1395,16 +1402,6 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Thomas Baechler <thomas@archlinux.org>
- * Fixes I/O errors with Teac HD-35PU devices
- */
-
-UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
- "Super Top",
- "USB 2.0 IDE DEVICE",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE),
-
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/