ide: add ide_set{_max}_pio() (take 4)
* Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags
and set them in ht6560, cmd640, cmd64x and sc1200 host drivers.
* Add set_pio_mode_abuse() for checking if host driver has a non-standard
->tuneproc() implementation and use it in do_special().
* Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find
the maximum PIO mode supported by the host), also add ide_set_max_pio()
wrapper for ide_set_pio() to use for auto-tuning. Convert users of
->tuneproc to use ide_set{_max}_pio() where possible. This leaves only
do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as
a direct users of ->tuneproc.
* Remove no longer needed ide_get_best_pio_mode() calls and printk-s
reporting PIO mode selected from ->tuneproc implementations.
* Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const.
* Remove stale comment from ide_config_drive_speed().
v2:
* Fix "ata_" prefix (Noticed by Jeff).
v3:
* Minor cleanups/fixups per Sergei's suggestions.
v4:
* Fix compile problem in drivers/ide/pci/cmd640.c
(Noticed by Andrew Morton).
* Improve some ->set_pio_mode comments.
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index a827ea2..0d5f62c 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -138,9 +138,8 @@
return(ide_config_drive_speed(drive, speed));
}
-static void aec62xx_tune_drive (ide_drive_t *drive, u8 pio)
+static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void) HWIF(drive)->speedproc(drive, pio + XFER_PIO_0);
}
@@ -150,7 +149,7 @@
return 0;
if (ide_use_fast_pio(drive))
- aec62xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -201,7 +200,7 @@
u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f;
unsigned long flags;
- hwif->tuneproc = &aec62xx_tune_drive;
+ hwif->set_pio_mode = &aec_set_pio_mode;
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
if(hwif->mate)
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 37ecd72..005402a 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -283,17 +283,14 @@
#endif /* defined(DISPLAY_ALI_TIMINGS) && defined(CONFIG_IDE_PROC_FS) */
/**
- * ali15x3_tune_pio - set up chipset for PIO mode
- * @drive: drive to tune
- * @pio: desired mode
+ * ali_tune_pio - set host controller for PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
*
- * Select the best PIO mode for the drive in question.
- * Then program the controller for this mode.
- *
- * Returns the PIO mode programmed.
+ * Program the controller for the given PIO mode.
*/
-
-static u8 ali15x3_tune_pio (ide_drive_t *drive, u8 pio)
+
+static void ali_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@@ -306,7 +303,6 @@
u8 cd_dma_fifo = 0;
int unit = drive->select.b.unit & 1;
- pio = ide_get_best_pio_mode(drive, pio, 5);
s_time = ide_pio_timings[pio].setup_time;
a_time = ide_pio_timings[pio].active_time;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
@@ -359,22 +355,20 @@
* { 25, 70, 25 }, PIO Mode 4 with IORDY ns
* { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard)
*/
-
- return pio;
}
/**
- * ali15x3_tune_drive - set up drive for PIO mode
+ * ali_set_pio_mode - set up drive for PIO mode
* @drive: drive to tune
* @pio: desired mode
*
- * Program the controller with the best PIO timing for the given drive.
+ * Program the controller with the desired PIO timing for the given drive.
* Then set up the drive itself.
*/
-static void ali15x3_tune_drive (ide_drive_t *drive, u8 pio)
+static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ali15x3_tune_pio(drive, pio);
+ ali_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -437,7 +431,7 @@
pci_write_config_byte(dev, m5229_udma, tmpbyte);
if (speed < XFER_SW_DMA_0)
- (void) ali15x3_tune_pio(drive, speed - XFER_PIO_0);
+ ali_tune_pio(drive, speed - XFER_PIO_0);
} else {
pci_read_config_byte(dev, m5229_udma, &tmpbyte);
tmpbyte &= (0x0f << ((1-unit) << 2));
@@ -470,7 +464,7 @@
if (ide_tune_dma(drive))
return 0;
- ali15x3_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -700,7 +694,7 @@
static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
{
hwif->autodma = 0;
- hwif->tuneproc = &ali15x3_tune_drive;
+ hwif->set_pio_mode = &ali_set_pio_mode;
hwif->speedproc = &ali15x3_tune_chipset;
hwif->udma_filter = &ali_udma_filter;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 9abbde3..1088ba8 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -266,16 +266,12 @@
}
/*
- * amd74xx_tune_drive() is a callback from upper layers for
- * PIO-only tuning.
+ * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
*/
-static void amd74xx_tune_drive(ide_drive_t *drive, u8 pio)
+static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- if (pio == 255)
- pio = ide_get_best_pio_mode(drive, 255, 5);
-
- amd_set_drive(drive, XFER_PIO_0 + min_t(byte, pio, 5));
+ amd_set_drive(drive, XFER_PIO_0 + pio);
}
static int amd74xx_ide_dma_check(ide_drive_t *drive)
@@ -283,7 +279,7 @@
u8 speed = ide_max_dma_mode(drive);
if (speed == 0) {
- amd74xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -409,7 +405,7 @@
hwif->autodma = 0;
- hwif->tuneproc = &amd74xx_tune_drive;
+ hwif->set_pio_mode = &amd_set_pio_mode;
hwif->speedproc = &amd_set_drive;
for (i = 0; i < 2; i++) {
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index e05e882..b9f66f5 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -153,9 +153,8 @@
spin_unlock_irqrestore(&atiixp_lock, flags);
}
-static void atiixp_tuneproc(ide_drive_t *drive, u8 pio)
+static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
atiixp_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -231,7 +230,7 @@
return 0;
if (ide_use_fast_pio(drive))
- atiixp_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -254,7 +253,7 @@
hwif->irq = ch ? 15 : 14;
hwif->autodma = 0;
- hwif->tuneproc = &atiixp_tuneproc;
+ hwif->set_pio_mode = &atiixp_set_pio_mode;
hwif->speedproc = &atiixp_speedproc;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 9689494..f369645 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -628,45 +628,40 @@
program_drive_counts (index);
}
-/*
- * Drive PIO mode selection:
- */
-static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted)
+static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
unsigned int index = 0, cycle_time;
u8 b;
while (drive != cmd_drives[index]) {
if (++index > 3) {
- printk("%s: bad news in cmd640_tune_drive\n", drive->name);
+ printk(KERN_ERR "%s: bad news in %s\n",
+ drive->name, __FUNCTION__);
return;
}
}
- switch (mode_wanted) {
+ switch (pio) {
case 6: /* set fast-devsel off */
case 7: /* set fast-devsel on */
- mode_wanted &= 1;
b = get_cmd640_reg(CNTRL) & ~0x27;
- if (mode_wanted)
+ if (pio & 1)
b |= 0x27;
put_cmd640_reg(CNTRL, b);
- printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis");
+ printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, (pio & 1) ? "en" : "dis");
return;
case 8: /* set prefetch off */
case 9: /* set prefetch on */
- mode_wanted &= 1;
- set_prefetch_mode(index, mode_wanted);
- printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis");
+ set_prefetch_mode(index, pio & 1);
+ printk("%s: %sabled cmd640 prefetch\n", drive->name, (pio & 1) ? "en" : "dis");
return;
}
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 5);
- cycle_time = ide_pio_cycle_time(drive, mode_wanted);
- cmd640_set_mode(index, mode_wanted, cycle_time);
+ cycle_time = ide_pio_cycle_time(drive, pio);
+ cmd640_set_mode(index, pio, cycle_time);
printk("%s: selected cmd640 PIO mode%d (%dns)",
- drive->name, mode_wanted, cycle_time);
+ drive->name, pio, cycle_time);
display_clocks(index);
}
@@ -766,8 +761,10 @@
cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
cmd_hwif0->chipset = ide_cmd640;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_ABUSE_FAST_DEVSEL;
cmd_hwif0->pio_mask = ATA_PIO5;
- cmd_hwif0->tuneproc = &cmd640_tune_drive;
+ cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
/*
@@ -822,8 +819,10 @@
cmd_hwif1->mate = cmd_hwif0;
cmd_hwif1->channel = 1;
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+ cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_ABUSE_FAST_DEVSEL;
cmd_hwif1->pio_mask = ATA_PIO5;
- cmd_hwif1->tuneproc = &cmd640_tune_drive;
+ cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}
printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 5fe50a2..85f5e42 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -214,28 +214,25 @@
}
/*
- * This routine selects drive's best PIO mode and writes into the chipset
- * registers setup/active/recovery timings.
+ * This routine writes into the chipset registers
+ * PIO setup/active/recovery timings.
*/
-static u8 cmd64x_tune_pio (ide_drive_t *drive, u8 mode_wanted)
+static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
unsigned int cycle_time;
- u8 pio_mode, setup_count, arttim = 0;
+ u8 setup_count, arttim = 0;
+
static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
- pio_mode = ide_get_best_pio_mode(drive, mode_wanted, 5);
- cycle_time = ide_pio_cycle_time(drive, pio_mode);
-
- cmdprintk("%s: PIO mode wanted %d, selected %d (%d ns)\n",
- drive->name, mode_wanted, pio_mode, cycle_time);
+ cycle_time = ide_pio_cycle_time(drive, pio);
program_cycle_times(drive, cycle_time,
- ide_pio_timings[pio_mode].active_time);
+ ide_pio_timings[pio].active_time);
- setup_count = quantize_timing(ide_pio_timings[pio_mode].setup_time,
+ setup_count = quantize_timing(ide_pio_timings[pio].setup_time,
1000 / system_bus_clock());
/*
@@ -266,16 +263,14 @@
arttim |= setup_values[setup_count];
(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
-
- return pio_mode;
}
/*
* Attempts to set drive's PIO mode.
- * Special cases are 8: prefetch off, 9: prefetch on (both never worked),
- * and 255: auto-select best mode (used at boot time).
+ * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
*/
-static void cmd64x_tune_drive (ide_drive_t *drive, u8 pio)
+
+static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
/*
* Filter out the prefetch control values
@@ -284,7 +279,7 @@
if (pio == 8 || pio == 9)
return;
- pio = cmd64x_tune_pio(drive, pio);
+ cmd64x_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -334,7 +329,7 @@
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
- (void) cmd64x_tune_pio(drive, speed - XFER_PIO_0);
+ cmd64x_tune_pio(drive, speed - XFER_PIO_0);
break;
default:
return 1;
@@ -352,7 +347,7 @@
return 0;
if (ide_use_fast_pio(drive))
- cmd64x_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -536,7 +531,7 @@
pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- hwif->tuneproc = &cmd64x_tune_drive;
+ hwif->set_pio_mode = &cmd64x_set_pio_mode;
hwif->speedproc = &cmd64x_tune_chipset;
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
@@ -620,6 +615,7 @@
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x00, /* no udma */
},{ /* 1 */
@@ -630,6 +626,7 @@
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x07, /* udma0-2 */
},{ /* 2 */
@@ -640,6 +637,7 @@
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x1f, /* udma0-4 */
},{ /* 3 */
@@ -650,6 +648,7 @@
.autodma = AUTODMA,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.udma_mask = 0x3f, /* udma0-5 */
}
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index af67438..a73c318 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -122,17 +122,16 @@
return error;
}
-
-static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
+
+static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
- cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
+ cs5520_tune_chipset(drive, XFER_PIO_0 + pio);
}
static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
{
/* Tune the drive for PIO modes up to PIO 4 */
- cs5520_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
/* Then tell the core to use DMA operations */
return 0;
@@ -164,7 +163,7 @@
static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
{
- hwif->tuneproc = &cs5520_tune_drive;
+ hwif->set_pio_mode = &cs5520_set_pio_mode;
hwif->speedproc = &cs5520_tune_chipset;
hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
hwif->ide_dma_on = &cs5520_dma_on;
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 518f430..1588a32 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -71,19 +71,18 @@
}
/**
- * cs5530_tuneproc - select/set PIO modes
+ * cs5530_set_pio_mode - set PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
*
- * cs5530_tuneproc() handles selection/setting of PIO modes
- * for both the chipset and drive.
+ * Handles setting of PIO mode for both the chipset and drive.
*
- * The ide_init_cs5530() routine guarantees that all drives
+ * The init_hwif_cs5530() routine guarantees that all drives
* will have valid default PIO timings set up before we get here.
*/
-static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
+static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
-
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
cs5530_tunepio(drive, pio);
}
@@ -306,7 +305,7 @@
if (hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
- hwif->tuneproc = &cs5530_tuneproc;
+ hwif->set_pio_mode = &cs5530_set_pio_mode;
hwif->speedproc = &cs5530_tune_chipset;
basereg = CS5530_BASEREG(hwif);
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index bc00e7b..383b7ec 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -147,16 +147,16 @@
return 0;
}
-/****
- * cs5535_tuneproc - PIO setup
- * @drive: drive to set up
- * @pio: mode to use (255 for 'best possible')
+/**
+ * cs5535_set_pio_mode - PIO setup
+ * @drive: drive
+ * @pio: PIO mode number
*
* A callback from the upper layers for PIO-only tuning.
*/
-static void cs5535_tuneproc(ide_drive_t *drive, u8 pio)
+
+static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
cs5535_set_speed(drive, XFER_PIO_0 + pio);
}
@@ -169,7 +169,7 @@
return 0;
if (ide_use_fast_pio(drive))
- cs5535_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -198,7 +198,7 @@
hwif->autodma = 0;
- hwif->tuneproc = &cs5535_tuneproc;
+ hwif->set_pio_mode = &cs5535_set_pio_mode;
hwif->speedproc = &cs5535_set_drive;
hwif->ide_dma_check = &cs5535_dma_check;
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index daa36fc..dc27802 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -97,9 +97,6 @@
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
-/* the max PIO mode - from datasheet */
-#define CY82C693_MAX_PIO 4
-
/* the min and max PCI bus speed in MHz - from datasheet */
#define CY82C963_MIN_BUS_SPEED 25
#define CY82C963_MAX_BUS_SPEED 33
@@ -148,9 +145,6 @@
* so you can play with the idebus=xx parameter
*/
- if (pio > CY82C693_MAX_PIO)
- pio = CY82C693_MAX_PIO;
-
/* let's calc the address setup time clocks */
p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed);
@@ -269,10 +263,7 @@
return __ide_dma_on(drive);
}
-/*
- * tune ide drive - set PIO mode
- */
-static void cy82c693_tune_drive (ide_drive_t *drive, u8 pio)
+static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
@@ -329,13 +320,6 @@
addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
#endif /* CY82C693_DEBUG_LOGS */
- /* first let's calc the pio modes */
- pio = ide_get_best_pio_mode(drive, pio, CY82C693_MAX_PIO);
-
-#if CY82C693_DEBUG_INFO
- printk (KERN_INFO "%s: Selected PIO mode %d\n", drive->name, pio);
-#endif /* CY82C693_DEBUG_INFO */
-
/* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk);
@@ -447,7 +431,7 @@
hwif->autodma = 0;
hwif->chipset = ide_cy82c693;
- hwif->tuneproc = &cy82c693_tune_drive;
+ hwif->set_pio_mode = &cy82c693_set_pio_mode;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index ba982d6..a1bb101 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -77,9 +77,8 @@
return(ide_config_drive_speed(drive, speed));
}
-static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
+static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
@@ -91,7 +90,7 @@
return -1;
if (ide_use_fast_pio(drive))
- hpt34x_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -145,7 +144,7 @@
hwif->autodma = 0;
- hwif->tuneproc = &hpt34x_tune_drive;
+ hwif->set_pio_mode = &hpt34x_set_pio_mode;
hwif->speedproc = &hpt34x_tune_chipset;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 67127ac..0e7d3b6 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -662,9 +662,8 @@
return hpt36x_tune_chipset(drive, speed);
}
-static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
+static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
@@ -726,7 +725,7 @@
return 0;
if (ide_use_fast_pio(drive))
- hpt3xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -1257,7 +1256,7 @@
/* Cache the channel's MISC. control registers' offset */
hwif->select_data = hwif->channel ? 0x54 : 0x50;
- hwif->tuneproc = &hpt3xx_tune_drive;
+ hwif->set_pio_mode = &hpt3xx_set_pio_mode;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 6fa9557..d07771e 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -105,9 +105,8 @@
spin_unlock_irqrestore(&tune_lock, flags);
}
-static void it8213_tuneproc(ide_drive_t *drive, u8 pio)
+static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
it8213_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -212,7 +211,7 @@
if (ide_tune_dma(drive))
return 0;
- it8213_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -231,7 +230,7 @@
u8 reg42h = 0;
hwif->speedproc = &it8213_tune_chipset;
- hwif->tuneproc = &it8213_tuneproc;
+ hwif->set_pio_mode = &it8213_set_pio_mode;
hwif->autodma = 0;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index a756e61..0cce4a7 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -274,9 +274,8 @@
return ide_config_drive_speed(drive, XFER_PIO_0 + set_pio);
}
-static void it821x_tuneproc(ide_drive_t *drive, u8 pio)
+static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void)it821x_tunepio(drive, pio);
}
@@ -473,7 +472,7 @@
if (ide_tune_dma(drive))
return 0;
- it821x_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -640,7 +639,7 @@
}
hwif->speedproc = &it821x_tune_chipset;
- hwif->tuneproc = &it821x_tuneproc;
+ hwif->set_pio_mode = &it821x_set_pio_mode;
/* MWDMA/PIO clock switching for pass through mode */
if(!idev->smart) {
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 7bac87f..d379fba 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -83,9 +83,8 @@
return ATA_CBL_PATA80;
}
-static void jmicron_tuneproc(ide_drive_t *drive, u8 pio)
+static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 5);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -116,7 +115,7 @@
if (ide_tune_dma(drive))
return 0;
- jmicron_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -131,7 +130,7 @@
static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
{
hwif->speedproc = &jmicron_tune_chipset;
- hwif->tuneproc = &jmicron_tuneproc;
+ hwif->set_pio_mode = &jmicron_set_pio_mode;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 3a2bb27..9fa0639 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -47,7 +47,7 @@
* The main problem with OPTi is that some timings for master
* and slave must be the same. For example, if you have master
* PIO 3 and slave PIO 0, driver have to set some timings of
- * master for PIO 0. Second problem is that opti621_tune_drive
+ * master for PIO 0. Second problem is that opti621_set_pio_mode
* got only one drive to set, but have to set both drives.
* This is solved in compute_pios. If you don't set
* the second drive, compute_pios use ide_get_best_pio_mode
@@ -103,7 +103,7 @@
#include <asm/io.h>
-#define OPTI621_MAX_PIO 3
+//#define OPTI621_MAX_PIO 3
/* In fact, I do not have any PIO 4 drive
* (address: 25 ns, data: 70 ns, recovery: 35 ns),
* but OPTi 82C621 is programmable and it can do (minimal values):
@@ -136,8 +136,8 @@
#define PIO_NOT_EXIST 254
#define PIO_DONT_KNOW 255
-/* there are stored pio numbers from other calls of opti621_tune_drive */
-static void compute_pios(ide_drive_t *drive, u8 pio)
+/* there are stored pio numbers from other calls of opti621_set_pio_mode */
+static void compute_pios(ide_drive_t *drive, const u8 pio)
/* Store values into drive->drive_data
* second_contr - 0 for primary controller, 1 for secondary
* slave_drive - 0 -> pio is for master, 1 -> pio is for slave
@@ -147,12 +147,13 @@
int d;
ide_hwif_t *hwif = HWIF(drive);
- drive->drive_data = ide_get_best_pio_mode(drive, pio, OPTI621_MAX_PIO);
+ drive->drive_data = pio;
+
for (d = 0; d < 2; ++d) {
drive = &hwif->drives[d];
if (drive->present) {
if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, OPTI621_MAX_PIO);
+ drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
#ifdef OPTI621_DEBUG
printk("%s: Selected PIO mode %d\n",
drive->name, drive->drive_data);
@@ -240,8 +241,7 @@
}
-/* Main tune procedure, called from tuneproc. */
-static void opti621_tune_drive (ide_drive_t *drive, u8 pio)
+static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
/* primary and secondary drives share some registers,
* so we have to program both drives
@@ -331,7 +331,8 @@
hwif->autodma = 0;
hwif->drives[0].drive_data = PIO_DONT_KNOW;
hwif->drives[1].drive_data = PIO_DONT_KNOW;
- hwif->tuneproc = &opti621_tune_drive;
+
+ hwif->set_pio_mode = &opti621_set_pio_mode;
if (!(hwif->dma_base))
return;
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 3787194..5fb1eed 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -215,9 +215,8 @@
return err;
}
-static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
+static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void)pdcnew_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -237,7 +236,7 @@
return 0;
if (ide_use_fast_pio(drive))
- pdcnew_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -490,7 +489,8 @@
{
hwif->autodma = 0;
- hwif->tuneproc = &pdcnew_tune_drive;
+ hwif->set_pio_mode = &pdcnew_set_pio_mode;
+
hwif->quirkproc = &pdcnew_quirkproc;
hwif->speedproc = &pdcnew_tune_chipset;
hwif->resetproc = &pdcnew_reset;
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index e7a5e30..b578307 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -142,9 +142,8 @@
return ide_config_drive_speed(drive, speed);
}
-static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
+static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -190,7 +189,7 @@
return 0;
if (ide_use_fast_pio(drive))
- pdc202xx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -306,10 +305,11 @@
{
ide_hwif_t *hwif = HWIF(drive);
ide_hwif_t *mate = hwif->mate;
-
+
pdc202xx_reset_host(hwif);
pdc202xx_reset_host(mate);
- pdc202xx_tune_drive(drive, 255);
+
+ ide_set_max_pio(drive);
}
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
@@ -328,7 +328,9 @@
hwif->rqsize = 256;
hwif->autodma = 0;
- hwif->tuneproc = &pdc202xx_tune_drive;
+
+ hwif->set_pio_mode = &pdc202xx_set_pio_mode;
+
hwif->quirkproc = &pdc202xx_quirkproc;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index b66f9d1..07492d7 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -17,11 +17,11 @@
* 41
* 43
*
- * | PIO 0 | c0 | 80 | 0 | piix_tune_drive(drive, 0);
- * | PIO 2 | SW2 | d0 | 90 | 4 | piix_tune_drive(drive, 2);
- * | PIO 3 | MW1 | e1 | a1 | 9 | piix_tune_drive(drive, 3);
- * | PIO 4 | MW2 | e3 | a3 | b | piix_tune_drive(drive, 4);
- *
+ * | PIO 0 | c0 | 80 | 0 |
+ * | PIO 2 | SW2 | d0 | 90 | 4 |
+ * | PIO 3 | MW1 | e1 | a1 | 9 |
+ * | PIO 4 | MW2 | e3 | a3 | b |
+ *
* sitre = word40 & 0x4000; primary
* sitre = word42 & 0x4000; secondary
*
@@ -204,16 +204,16 @@
}
/**
- * piix_tune_drive - tune a drive attached to PIIX
+ * piix_set_pio_mode - set PIO mode
* @drive: drive to tune
* @pio: desired PIO mode
*
* Set the drive's PIO mode (might be useful if drive is not registered
* in CMOS for any reason).
*/
-static void piix_tune_drive (ide_drive_t *drive, u8 pio)
+
+static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
piix_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -317,7 +317,7 @@
return 0;
if (ide_use_fast_pio(drive))
- piix_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -454,7 +454,8 @@
}
hwif->autodma = 0;
- hwif->tuneproc = &piix_tune_drive;
+
+ hwif->set_pio_mode = &piix_set_pio_mode;
hwif->speedproc = &piix_tune_chipset;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 059071c..f9f5ed9 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -272,19 +272,20 @@
}
/*
- * sc1200_tuneproc() handles selection/setting of PIO modes
+ * sc1200_set_pio_mode() handles setting of PIO modes
* for both the chipset and drive.
*
* All existing BIOSs for this chipset guarantee that all drives
* will have valid default PIO timings set up before we get here.
*/
-static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
+
+static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
int mode = -1;
/*
- * bad abuse of ->tuneproc interface
+ * bad abuse of ->set_pio_mode interface
*/
switch (pio) {
case 200: mode = XFER_UDMA_0; break;
@@ -302,9 +303,6 @@
return;
}
- pio = ide_get_best_pio_mode(drive, pio, 4);
- printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
-
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
sc1200_tunepio(drive, pio);
}
@@ -420,7 +418,8 @@
hwif->ide_dma_end = &sc1200_ide_dma_end;
if (!noautodma)
hwif->autodma = 1;
- hwif->tuneproc = &sc1200_tuneproc;
+
+ hwif->set_pio_mode = &sc1200_set_pio_mode;
hwif->speedproc = &sc1200_tune_chipset;
}
hwif->atapi_dma = 1;
@@ -436,6 +435,7 @@
.init_hwif = init_hwif_sc1200,
.autodma = AUTODMA,
.bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_ABUSE_DMA_MODES,
.pio_mask = ATA_PIO4,
};
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index a19687c..3505d57 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -221,9 +221,8 @@
out_be32((void __iomem *)pioct_port, reg);
}
-static void scc_tuneproc(ide_drive_t *drive, u8 pio)
+static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
scc_tune_pio(drive, pio);
ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -316,7 +315,7 @@
return 0;
if (ide_use_fast_pio(drive))
- scc_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -717,7 +716,7 @@
hwif->dma_setup = scc_dma_setup;
hwif->ide_dma_end = scc_ide_dma_end;
hwif->speedproc = scc_tune_chipset;
- hwif->tuneproc = scc_tuneproc;
+ hwif->set_pio_mode = scc_set_pio_mode;
hwif->ide_dma_check = scc_config_drive_for_dma;
hwif->ide_dma_test_irq = scc_dma_test_irq;
hwif->udma_filter = scc_udma_filter;
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index b51133b..f4e08ab 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -202,9 +202,8 @@
return (ide_config_drive_speed(drive, speed));
}
-static void svwks_tune_drive (ide_drive_t *drive, u8 pio)
+static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
svwks_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -217,7 +216,7 @@
return 0;
if (ide_use_fast_pio(drive))
- svwks_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -389,7 +388,7 @@
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &svwks_tune_drive;
+ hwif->set_pio_mode = &svwks_set_pio_mode;
hwif->speedproc = &svwks_tune_chipset;
hwif->udma_filter = &svwks_udma_filter;
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 5714576..38f63d1 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -587,7 +587,7 @@
hwif->mwdma_mask = 0x2; /* Multimode-2 DMA */
hwif->swdma_mask = 0x2;
hwif->pio_mask = 0x00;
- hwif->tuneproc = NULL; /* Sets timing for PIO mode */
+ hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */
hwif->speedproc = NULL; /* Sets timing for DMA &/or PIO modes */
hwif->selectproc = NULL;/* Use the default routine to select drive */
hwif->reset_poll = NULL;/* No HBA specific reset_poll needed */
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 4c1f3bc..e07c991 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -219,9 +219,8 @@
}
}
-static void sil_tuneproc(ide_drive_t *drive, u8 pio)
+static void sil_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
sil_tune_pio(drive, pio);
(void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -328,7 +327,7 @@
return 0;
if (ide_use_fast_pio(drive))
- sil_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -899,7 +898,7 @@
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
- hwif->tuneproc = &sil_tuneproc;
+ hwif->set_pio_mode = &sil_set_pio_mode;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
hwif->udma_filter = &sil_udma_filter;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index fed582b..7455bf3 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -519,14 +519,13 @@
}
}
-static int sis5513_tune_drive(ide_drive_t *drive, u8 pio)
+static int sis5513_tune_drive(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
config_art_rwp_pio(drive, pio);
return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static void sis5513_tuneproc(ide_drive_t *drive, u8 pio)
+static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
(void)sis5513_tune_drive(drive, pio);
}
@@ -621,7 +620,7 @@
/*
* TODO: always set PIO mode and remove this
*/
- sis5513_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
drive->init_speed = 0;
@@ -629,7 +628,7 @@
return 0;
if (ide_use_fast_pio(drive))
- sis5513_tuneproc(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -852,7 +851,7 @@
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
- hwif->tuneproc = &sis5513_tuneproc;
+ hwif->set_pio_mode = &sis_set_pio_mode;
hwif->speedproc = &sis5513_tune_chipset;
if (chipset_family >= ATA_133)
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 9f425b0..131e91c 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -75,16 +75,12 @@
/*
* Configure the chipset for PIO mode.
*/
-static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
+static void sl82c105_tune_pio(ide_drive_t *drive, const u8 pio)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
int reg = 0x44 + drive->dn * 4;
u16 drv_ctrl;
- DBG(("sl82c105_tune_pio(drive:%s, pio:%u)\n", drive->name, pio));
-
- pio = ide_get_best_pio_mode(drive, pio, 5);
-
drv_ctrl = get_pio_timings(drive, pio);
/*
@@ -106,8 +102,6 @@
printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
ide_xfer_verbose(pio + XFER_PIO_0),
ide_pio_cycle_time(drive, pio), drv_ctrl);
-
- return pio;
}
/*
@@ -151,7 +145,7 @@
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
- (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
+ sl82c105_tune_pio(drive, speed - XFER_PIO_0);
break;
default:
return -1;
@@ -325,11 +319,10 @@
* We only deal with PIO mode here - DMA mode 'using_dma' is not
* initialised at the point that this function is called.
*/
-static void sl82c105_tune_drive(ide_drive_t *drive, u8 pio)
+static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- DBG(("sl82c105_tune_drive(drive:%s, pio:%u)\n", drive->name, pio));
+ sl82c105_tune_pio(drive, pio);
- pio = sl82c105_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -397,7 +390,7 @@
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
- hwif->tuneproc = &sl82c105_tune_drive;
+ hwif->set_pio_mode = &sl82c105_set_pio_mode;
hwif->speedproc = &sl82c105_tune_chipset;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index cc93535..214d396 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -95,9 +95,8 @@
spin_unlock_irqrestore(&ide_lock, flags);
}
-static void slc90e66_tune_drive (ide_drive_t *drive, u8 pio)
+static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
slc90e66_tune_pio(drive, pio);
(void) ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
@@ -166,7 +165,7 @@
return 0;
if (ide_use_fast_pio(drive))
- slc90e66_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -182,7 +181,7 @@
hwif->irq = hwif->channel ? 15 : 14;
hwif->speedproc = &slc90e66_tune_chipset;
- hwif->tuneproc = &slc90e66_tune_drive;
+ hwif->set_pio_mode = &slc90e66_set_pio_mode;
pci_read_config_byte(hwif->pci_dev, 0x47, ®47);
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index e542577..e23b9cf 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -43,9 +43,8 @@
return ide_config_drive_speed(drive, speed);
}
-static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
+static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
(void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
}
@@ -171,7 +170,7 @@
return 0;
if (ide_use_fast_pio(drive))
- tc86c001_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -193,7 +192,7 @@
/* Store the system control register base for convenience... */
hwif->config_data = sc_base;
- hwif->tuneproc = &tc86c001_tune_drive;
+ hwif->set_pio_mode = &tc86c001_set_pio_mode;
hwif->speedproc = &tc86c001_tune_chipset;
hwif->busproc = &tc86c001_busproc;
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index 47cf89b..c3ff066 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -93,10 +93,9 @@
return (ide_config_drive_speed(drive, speed));
}
-static void triflex_tune_drive(ide_drive_t *drive, u8 pio)
+static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- int use_pio = ide_get_best_pio_mode(drive, pio, 4);
- (void) triflex_tune_chipset(drive, (XFER_PIO_0 + use_pio));
+ (void)triflex_tune_chipset(drive, XFER_PIO_0 + pio);
}
static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
@@ -104,14 +103,14 @@
if (ide_tune_dma(drive))
return 0;
- triflex_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
{
- hwif->tuneproc = &triflex_tune_drive;
+ hwif->set_pio_mode = &triflex_set_pio_mode;
hwif->speedproc = &triflex_tune_chipset;
if (hwif->dma_base == 0)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index e3bf907..2fc4f88 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -195,19 +195,16 @@
}
/**
- * via82cxxx_tune_drive - PIO setup
- * @drive: drive to set up
- * @pio: mode to use (255 for 'best possible')
+ * via_set_pio_mode - PIO setup
+ * @drive: drive
+ * @pio: PIO mode number
*
* A callback from the upper layers for PIO-only tuning.
*/
-static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
+static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- if (pio == 255)
- pio = ide_get_best_pio_mode(drive, 255, 5);
-
- via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
+ via_set_drive(drive, XFER_PIO_0 + pio);
}
/**
@@ -223,7 +220,7 @@
u8 speed = ide_max_dma_mode(drive);
if (speed == 0) {
- via82cxxx_tune_drive(drive, 255);
+ ide_set_max_pio(drive);
return -1;
}
@@ -465,7 +462,7 @@
hwif->autodma = 0;
- hwif->tuneproc = &via82cxxx_tune_drive;
+ hwif->set_pio_mode = &via_set_pio_mode;
hwif->speedproc = &via_set_drive;