rtlwifi: Convert printks to pr_<level>
Use the current logging styles.
Add pr_fmt where appropriate.
Remove now unnecessary prefixes from printks.
Convert hard coded prefix to __func__.
Add a missing "\n" to a format.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index 5f46efd..0b598db 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/ip.h>
#include "wifi.h"
#include "rc.h"
@@ -397,8 +399,8 @@
radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
if (valid) {
- printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
- rtlpriv->rfkill.rfkill_state ? "on" : "off");
+ pr_info("wireless switch is %s\n",
+ rtlpriv->rfkill.rfkill_state ? "on" : "off");
rtlpriv->rfkill.rfkill_state = radio_state;
@@ -1401,8 +1403,7 @@
static int __init rtl_core_module_init(void)
{
if (rtl_rate_control_register())
- printk(KERN_ERR "rtlwifi: Unable to register rtl_rc,"
- "use default RC !!\n");
+ pr_err("Unable to register rtl_rc, use default RC !!\n");
return 0;
}
diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
index 66588c2..7babb6a 100644
--- a/drivers/net/wireless/rtlwifi/cam.c
+++ b/drivers/net/wireless/rtlwifi/cam.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "wifi.h"
#include "cam.h"
@@ -347,7 +349,7 @@
/* Remove from HW Security CAM */
memset(rtlpriv->sec.hwsec_cam_sta_addr[i], 0, ETH_ALEN);
rtlpriv->sec.hwsec_cam_bitmap &= ~(BIT(0) << i);
- printk(KERN_INFO "&&&&&&&&&del entry %d\n", i);
+ pr_info("&&&&&&&&&del entry %d\n", i);
}
}
return;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
index f9f2370..49a064b 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/firmware.h>
#include "../wifi.h"
#include "../pci.h"
@@ -224,8 +226,7 @@
u32 fwsize;
enum version_8192c version = rtlhal->version;
- printk(KERN_INFO "rtl8192c: Loading firmware file %s\n",
- rtlpriv->cfg->fw_name);
+ pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
if (!rtlhal->pfirmware)
return 1;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 2b34764..814c05d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../wifi.h"
#include "../efuse.h"
#include "../base.h"
@@ -337,7 +339,7 @@
rtlefuse->board_type = boardType;
if (IS_HIGHT_PA(rtlefuse->board_type))
rtlefuse->external_pa = 1;
- printk(KERN_INFO "rtl8192cu: Board Type %x\n", rtlefuse->board_type);
+ pr_info("Board Type %x\n", rtlefuse->board_type);
#ifdef CONFIG_ANTENNA_DIVERSITY
/* Antenna Diversity setting. */
@@ -346,8 +348,7 @@
else
rtl_efuse->antenna_cfg = registry_par->antdiv_cfg; /* 0:OFF, */
- printk(KERN_INFO "rtl8192cu: Antenna Config %x\n",
- rtl_efuse->antenna_cfg);
+ pr_info("Antenna Config %x\n", rtl_efuse->antenna_cfg);
#endif
}
@@ -384,71 +385,57 @@
pbtpriv->bBTNonTrafficModeSet = _FALSE;
pbtpriv->CurrentState = 0;
pbtpriv->PreviousState = 0;
- printk(KERN_INFO "rtl8192cu: BT Coexistance = %s\n",
- (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
+ pr_info("BT Coexistance = %s\n",
+ (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
if (pbtpriv->BT_Coexist) {
if (pbtpriv->BT_Ant_Num == Ant_x2)
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "Ant_Num = Antx2\n");
+ pr_info("BlueTooth BT_Ant_Num = Antx2\n");
else if (pbtpriv->BT_Ant_Num == Ant_x1)
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "Ant_Num = Antx1\n");
+ pr_info("BlueTooth BT_Ant_Num = Antx1\n");
switch (pbtpriv->BT_CoexistType) {
case BT_2Wire:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_2Wire\n");
+ pr_info("BlueTooth BT_CoexistType = BT_2Wire\n");
break;
case BT_ISSC_3Wire:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_ISSC_3Wire\n");
+ pr_info("BlueTooth BT_CoexistType = BT_ISSC_3Wire\n");
break;
case BT_Accel:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_Accel\n");
+ pr_info("BlueTooth BT_CoexistType = BT_Accel\n");
break;
case BT_CSR_BC4:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_CSR_BC4\n");
+ pr_info("BlueTooth BT_CoexistType = BT_CSR_BC4\n");
break;
case BT_CSR_BC8:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_CSR_BC8\n");
+ pr_info("BlueTooth BT_CoexistType = BT_CSR_BC8\n");
break;
case BT_RTL8756:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_RTL8756\n");
+ pr_info("BlueTooth BT_CoexistType = BT_RTL8756\n");
break;
default:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = Unknown\n");
+ pr_info("BlueTooth BT_CoexistType = Unknown\n");
break;
}
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Ant_isolation = %d\n",
- pbtpriv->BT_Ant_isolation);
+ pr_info("BlueTooth BT_Ant_isolation = %d\n",
+ pbtpriv->BT_Ant_isolation);
switch (pbtpriv->BT_Service) {
case BT_OtherAction:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_OtherAction\n");
+ pr_info("BlueTooth BT_Service = BT_OtherAction\n");
break;
case BT_SCO:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_SCO\n");
+ pr_info("BlueTooth BT_Service = BT_SCO\n");
break;
case BT_Busy:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_Busy\n");
+ pr_info("BlueTooth BT_Service = BT_Busy\n");
break;
case BT_OtherBusy:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_OtherBusy\n");
+ pr_info("BlueTooth BT_Service = BT_OtherBusy\n");
break;
default:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_Idle\n");
+ pr_info("BlueTooth BT_Service = BT_Idle\n");
break;
}
- printk(KERN_INFO "rtl8192cu: BT_RadioSharedType = 0x%x\n",
- pbtpriv->BT_RadioSharedType);
+ pr_info("BT_RadioSharedType = 0x%x\n",
+ pbtpriv->BT_RadioSharedType);
}
}
@@ -526,7 +513,7 @@
usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
}
- printk(KERN_INFO "rtl8192cu: MAC address: %pM\n", rtlefuse->dev_addr);
+ pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
_rtl92cu_read_txpower_info_from_hwpg(hw,
rtlefuse->autoload_failflag, hwinfo);
rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
@@ -665,7 +652,7 @@
rtl_write_word(rtlpriv, REG_APS_FSMCO, value16);
do {
if (!(rtl_read_word(rtlpriv, REG_APS_FSMCO) & APFM_ONMAC)) {
- printk(KERN_INFO "rtl8192cu: MAC auto ON okay!\n");
+ pr_info("MAC auto ON okay!\n");
break;
}
if (pollingCount++ > 100) {
@@ -819,7 +806,7 @@
}
_rtl92c_init_chipN_reg_priority(hw, value, value, value, value,
value, value);
- printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
+ pr_info("Tx queue select: 0x%02x\n", queue_sel);
}
static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
@@ -863,7 +850,7 @@
hiQ = valueHi;
}
_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
- printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
+ pr_info("Tx queue select: 0x%02x\n", queue_sel);
}
static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
index a90c09b..194fc69 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -26,6 +26,9 @@
* Larry Finger <Larry.Finger@lwfinger.net>
*
****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include "../wifi.h"
@@ -213,14 +216,14 @@
for (i = 0; i < (boundary - 1); i++) {
rst = rtl92c_llt_write(hw, i , i + 1);
if (true != rst) {
- printk(KERN_ERR "===> %s #1 fail\n", __func__);
+ pr_err("===> %s #1 fail\n", __func__);
return rst;
}
}
/* end of list */
rst = rtl92c_llt_write(hw, (boundary - 1), 0xFF);
if (true != rst) {
- printk(KERN_ERR "===> %s #2 fail\n", __func__);
+ pr_err("===> %s #2 fail\n", __func__);
return rst;
}
/* Make the other pages as ring buffer
@@ -231,14 +234,14 @@
for (i = boundary; i < LLT_LAST_ENTRY_OF_TX_PKT_BUFFER; i++) {
rst = rtl92c_llt_write(hw, i, (i + 1));
if (true != rst) {
- printk(KERN_ERR "===> %s #3 fail\n", __func__);
+ pr_err("===> %s #3 fail\n", __func__);
return rst;
}
}
/* Let last entry point to the start entry of ring buffer */
rst = rtl92c_llt_write(hw, LLT_LAST_ENTRY_OF_TX_PKT_BUFFER, boundary);
if (true != rst) {
- printk(KERN_ERR "===> %s #4 fail\n", __func__);
+ pr_err("===> %s #4 fail\n", __func__);
return rst;
}
return rst;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
index 0883774..351765d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/vmalloc.h>
#include "../wifi.h"
@@ -170,10 +172,8 @@
}
if (!header_print) {
- printk(KERN_INFO "rtl8192de: Driver for Realtek RTL8192DE"
- " WLAN interface");
- printk(KERN_INFO "rtl8192de: Loading firmware file %s\n",
- rtlpriv->cfg->fw_name);
+ pr_info("Driver for Realtek RTL8192DE WLAN interface\n");
+ pr_info("Loading firmware file %s\n", rtlpriv->cfg->fw_name);
header_print++;
}
/* request fw */
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
index fe2b0b9..d59f66c 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../wifi.h"
#include "../efuse.h"
#include "../base.h"
@@ -465,8 +467,7 @@
if ((tmpvalue & BIT(6)))
break;
- printk(KERN_ERR "wait for BIT(6) return value %x\n",
- tmpvalue);
+ pr_err("wait for BIT(6) return value %x\n", tmpvalue);
if (waitcount == 0)
break;
@@ -1255,8 +1256,7 @@
if ((tmp & BIT(6)))
break;
- printk(KERN_ERR "wait for BIT(6) return value %x\n",
- tmp);
+ pr_err("wait for BIT(6) return value %x\n", tmp);
if (waitcnt == 0)
break;
@@ -1315,7 +1315,7 @@
if (u1btmp & BIT(7)) {
u1btmp &= ~(BIT(6) | BIT(7));
if (!_rtl92s_set_sysclk(hw, u1btmp)) {
- printk(KERN_ERR "Switch ctrl path fail\n");
+ pr_err("Switch ctrl path fail\n");
return;
}
}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index 81a5aa4..f27171a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../wifi.h"
#include "../pci.h"
#include "../ps.h"
@@ -1016,8 +1018,7 @@
rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
if (rtstatus != true) {
- printk(KERN_ERR "_rtl92s_phy_bb_config_parafile(): "
- "AGC Table Fail\n");
+ pr_err("%s(): AGC Table Fail\n", __func__);
goto phy_BB8190_Config_ParaFile_Fail;
}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
index c6e3a4c..0ad50fe 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/rf.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../wifi.h"
#include "reg.h"
#include "def.h"
@@ -507,7 +509,7 @@
}
if (rtstatus != true) {
- printk(KERN_ERR "Radio[%d] Fail!!", rfpath);
+ pr_err("Radio[%d] Fail!!\n", rfpath);
goto fail;
}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
index 1c6cb1d..3876078 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/sw.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/vmalloc.h>
#include "../wifi.h"
@@ -183,8 +185,8 @@
return 1;
}
- printk(KERN_INFO "rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE\n"
- " Loading firmware %s\n", rtlpriv->cfg->fw_name);
+ pr_info("Driver for Realtek RTL8192SE/RTL8191SE\n"
+ "Loading firmware %s\n", rtlpriv->cfg->fw_name);
/* request fw */
err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
rtlpriv->io.dev);
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index a9367eb..8b1cef0 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -24,6 +24,9 @@
* Hsinchu 300, Taiwan.
*
*****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/usb.h>
#include "core.h"
#include "wifi.h"
@@ -104,9 +107,8 @@
pdata, len, 0); /* max. timeout */
if (status < 0)
- printk(KERN_ERR "reg 0x%x, usbctrl_vendorreq TimeOut! "
- "status:0x%x value=0x%x\n", value, status,
- *(u32 *)pdata);
+ pr_err("reg 0x%x, usbctrl_vendorreq TimeOut! status:0x%x value=0x%x\n",
+ value, status, *(u32 *)pdata);
return status;
}
@@ -316,7 +318,7 @@
rtlusb->usb_rx_segregate_hdl =
rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl;
- printk(KERN_INFO "rtl8192cu: rx_max_size %d, rx_urb_num %d, in_ep %d\n",
+ pr_info("rx_max_size %d, rx_urb_num %d, in_ep %d\n",
rtlusb->rx_max_size, rtlusb->rx_urb_num, rtlusb->in_ep);
init_usb_anchor(&rtlusb->rx_submitted);
return 0;
@@ -580,7 +582,7 @@
} else{
/* TO DO */
_rtl_rx_pre_process(hw, skb);
- printk(KERN_ERR "rtlwifi: rx agg not supported\n");
+ pr_err("rx agg not supported\n");
}
goto resubmit;
}