rtlwifi: Convert printks to pr_<level>
Use the current logging styles.
Add pr_fmt where appropriate.
Remove now unnecessary prefixes from printks.
Convert hard coded prefix to __func__.
Add a missing "\n" to a format.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 2b34764..814c05d 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -27,6 +27,8 @@
*
*****************************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include "../wifi.h"
#include "../efuse.h"
#include "../base.h"
@@ -337,7 +339,7 @@
rtlefuse->board_type = boardType;
if (IS_HIGHT_PA(rtlefuse->board_type))
rtlefuse->external_pa = 1;
- printk(KERN_INFO "rtl8192cu: Board Type %x\n", rtlefuse->board_type);
+ pr_info("Board Type %x\n", rtlefuse->board_type);
#ifdef CONFIG_ANTENNA_DIVERSITY
/* Antenna Diversity setting. */
@@ -346,8 +348,7 @@
else
rtl_efuse->antenna_cfg = registry_par->antdiv_cfg; /* 0:OFF, */
- printk(KERN_INFO "rtl8192cu: Antenna Config %x\n",
- rtl_efuse->antenna_cfg);
+ pr_info("Antenna Config %x\n", rtl_efuse->antenna_cfg);
#endif
}
@@ -384,71 +385,57 @@
pbtpriv->bBTNonTrafficModeSet = _FALSE;
pbtpriv->CurrentState = 0;
pbtpriv->PreviousState = 0;
- printk(KERN_INFO "rtl8192cu: BT Coexistance = %s\n",
- (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
+ pr_info("BT Coexistance = %s\n",
+ (pbtpriv->BT_Coexist == _TRUE) ? "enable" : "disable");
if (pbtpriv->BT_Coexist) {
if (pbtpriv->BT_Ant_Num == Ant_x2)
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "Ant_Num = Antx2\n");
+ pr_info("BlueTooth BT_Ant_Num = Antx2\n");
else if (pbtpriv->BT_Ant_Num == Ant_x1)
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "Ant_Num = Antx1\n");
+ pr_info("BlueTooth BT_Ant_Num = Antx1\n");
switch (pbtpriv->BT_CoexistType) {
case BT_2Wire:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_2Wire\n");
+ pr_info("BlueTooth BT_CoexistType = BT_2Wire\n");
break;
case BT_ISSC_3Wire:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_ISSC_3Wire\n");
+ pr_info("BlueTooth BT_CoexistType = BT_ISSC_3Wire\n");
break;
case BT_Accel:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_Accel\n");
+ pr_info("BlueTooth BT_CoexistType = BT_Accel\n");
break;
case BT_CSR_BC4:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_CSR_BC4\n");
+ pr_info("BlueTooth BT_CoexistType = BT_CSR_BC4\n");
break;
case BT_CSR_BC8:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_CSR_BC8\n");
+ pr_info("BlueTooth BT_CoexistType = BT_CSR_BC8\n");
break;
case BT_RTL8756:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = BT_RTL8756\n");
+ pr_info("BlueTooth BT_CoexistType = BT_RTL8756\n");
break;
default:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_"
- "CoexistType = Unknown\n");
+ pr_info("BlueTooth BT_CoexistType = Unknown\n");
break;
}
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Ant_isolation = %d\n",
- pbtpriv->BT_Ant_isolation);
+ pr_info("BlueTooth BT_Ant_isolation = %d\n",
+ pbtpriv->BT_Ant_isolation);
switch (pbtpriv->BT_Service) {
case BT_OtherAction:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_OtherAction\n");
+ pr_info("BlueTooth BT_Service = BT_OtherAction\n");
break;
case BT_SCO:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_SCO\n");
+ pr_info("BlueTooth BT_Service = BT_SCO\n");
break;
case BT_Busy:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_Busy\n");
+ pr_info("BlueTooth BT_Service = BT_Busy\n");
break;
case BT_OtherBusy:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_OtherBusy\n");
+ pr_info("BlueTooth BT_Service = BT_OtherBusy\n");
break;
default:
- printk(KERN_INFO "rtl8192cu: BlueTooth BT_Service = "
- "BT_Idle\n");
+ pr_info("BlueTooth BT_Service = BT_Idle\n");
break;
}
- printk(KERN_INFO "rtl8192cu: BT_RadioSharedType = 0x%x\n",
- pbtpriv->BT_RadioSharedType);
+ pr_info("BT_RadioSharedType = 0x%x\n",
+ pbtpriv->BT_RadioSharedType);
}
}
@@ -526,7 +513,7 @@
usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
}
- printk(KERN_INFO "rtl8192cu: MAC address: %pM\n", rtlefuse->dev_addr);
+ pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
_rtl92cu_read_txpower_info_from_hwpg(hw,
rtlefuse->autoload_failflag, hwinfo);
rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
@@ -665,7 +652,7 @@
rtl_write_word(rtlpriv, REG_APS_FSMCO, value16);
do {
if (!(rtl_read_word(rtlpriv, REG_APS_FSMCO) & APFM_ONMAC)) {
- printk(KERN_INFO "rtl8192cu: MAC auto ON okay!\n");
+ pr_info("MAC auto ON okay!\n");
break;
}
if (pollingCount++ > 100) {
@@ -819,7 +806,7 @@
}
_rtl92c_init_chipN_reg_priority(hw, value, value, value, value,
value, value);
- printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
+ pr_info("Tx queue select: 0x%02x\n", queue_sel);
}
static void _rtl92cu_init_chipN_two_out_ep_priority(struct ieee80211_hw *hw,
@@ -863,7 +850,7 @@
hiQ = valueHi;
}
_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
- printk(KERN_INFO "rtl8192cu: Tx queue select: 0x%02x\n", queue_sel);
+ pr_info("Tx queue select: 0x%02x\n", queue_sel);
}
static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
index a90c09b..194fc69 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c
@@ -26,6 +26,9 @@
* Larry Finger <Larry.Finger@lwfinger.net>
*
****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include "../wifi.h"
@@ -213,14 +216,14 @@
for (i = 0; i < (boundary - 1); i++) {
rst = rtl92c_llt_write(hw, i , i + 1);
if (true != rst) {
- printk(KERN_ERR "===> %s #1 fail\n", __func__);
+ pr_err("===> %s #1 fail\n", __func__);
return rst;
}
}
/* end of list */
rst = rtl92c_llt_write(hw, (boundary - 1), 0xFF);
if (true != rst) {
- printk(KERN_ERR "===> %s #2 fail\n", __func__);
+ pr_err("===> %s #2 fail\n", __func__);
return rst;
}
/* Make the other pages as ring buffer
@@ -231,14 +234,14 @@
for (i = boundary; i < LLT_LAST_ENTRY_OF_TX_PKT_BUFFER; i++) {
rst = rtl92c_llt_write(hw, i, (i + 1));
if (true != rst) {
- printk(KERN_ERR "===> %s #3 fail\n", __func__);
+ pr_err("===> %s #3 fail\n", __func__);
return rst;
}
}
/* Let last entry point to the start entry of ring buffer */
rst = rtl92c_llt_write(hw, LLT_LAST_ENTRY_OF_TX_PKT_BUFFER, boundary);
if (true != rst) {
- printk(KERN_ERR "===> %s #4 fail\n", __func__);
+ pr_err("===> %s #4 fail\n", __func__);
return rst;
}
return rst;