[S390] bus_id -> dev_name conversions
bus_id -> dev_name() conversions in s390 code.
[cornelia.huck@de.ibm.com: minor adaptions]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 8399876..4005c44 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -910,7 +910,7 @@
* should proceed with the new tape... this
* should probably be done in user space!
*/
- PRINT_WARN("(%s): Swap Tape Device!\n", device->cdev->dev.bus_id);
+ PRINT_WARN("(%s): Swap Tape Device!\n", dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EIO);
}
@@ -1003,40 +1003,43 @@
/* Exception Message */
switch (sense->fmt.f70.emc) {
case 0x02:
- PRINT_WARN("(%s): Data degraded\n", device->cdev->dev.bus_id);
+ PRINT_WARN("(%s): Data degraded\n",
+ dev_name(&device->cdev->dev));
break;
case 0x03:
PRINT_WARN("(%s): Data degraded in partion %i\n",
- device->cdev->dev.bus_id, sense->fmt.f70.mp);
+ dev_name(&device->cdev->dev), sense->fmt.f70.mp);
break;
case 0x04:
- PRINT_WARN("(%s): Medium degraded\n", device->cdev->dev.bus_id);
+ PRINT_WARN("(%s): Medium degraded\n",
+ dev_name(&device->cdev->dev));
break;
case 0x05:
PRINT_WARN("(%s): Medium degraded in partition %i\n",
- device->cdev->dev.bus_id, sense->fmt.f70.mp);
+ dev_name(&device->cdev->dev), sense->fmt.f70.mp);
break;
case 0x06:
- PRINT_WARN("(%s): Block 0 Error\n", device->cdev->dev.bus_id);
+ PRINT_WARN("(%s): Block 0 Error\n",
+ dev_name(&device->cdev->dev));
break;
case 0x07:
PRINT_WARN("(%s): Medium Exception 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f70.md);
+ dev_name(&device->cdev->dev), sense->fmt.f70.md);
break;
default:
PRINT_WARN("(%s): MIM ExMsg: 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f70.emc);
+ dev_name(&device->cdev->dev), sense->fmt.f70.emc);
break;
}
/* Service Message */
switch (sense->fmt.f70.smc) {
case 0x02:
PRINT_WARN("(%s): Reference Media maintenance procedure %i\n",
- device->cdev->dev.bus_id, sense->fmt.f70.md);
+ dev_name(&device->cdev->dev), sense->fmt.f70.md);
break;
default:
PRINT_WARN("(%s): MIM ServiceMsg: 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f70.smc);
+ dev_name(&device->cdev->dev), sense->fmt.f70.smc);
break;
}
}
@@ -1054,101 +1057,101 @@
switch (sense->fmt.f71.emc) {
case 0x01:
PRINT_WARN("(%s): Effect of failure is unknown\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x02:
PRINT_WARN("(%s): CU Exception - no performance impact\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x03:
PRINT_WARN("(%s): CU Exception on channel interface 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x04:
PRINT_WARN("(%s): CU Exception on device path 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x05:
PRINT_WARN("(%s): CU Exception on library path 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x06:
PRINT_WARN("(%s): CU Exception on node 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x07:
PRINT_WARN("(%s): CU Exception on partition 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
default:
PRINT_WARN("(%s): SIM ExMsg: 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.emc);
+ dev_name(&device->cdev->dev), sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
PRINT_WARN("(%s): Repair impact is unknown\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x02:
PRINT_WARN("(%s): Repair will not impact cu performance\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable node "
"0x%x on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable nodes "
"(0x%x-0x%x) on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable cannel path "
"0x%x on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable cannel paths "
"(0x%x-0x%x) on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable device path "
"0x%x on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable device paths "
"(0x%x-0x%x) on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x06:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable library path "
"0x%x on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable library paths "
"(0x%x-0x%x) on CU\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
PRINT_WARN("(%s): Repair will disable access to CU\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
default:
PRINT_WARN("(%s): SIM ServiceMsg: 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.smc);
+ dev_name(&device->cdev->dev), sense->fmt.f71.smc);
}
}
@@ -1165,104 +1168,104 @@
switch (sense->fmt.f71.emc) {
case 0x01:
PRINT_WARN("(%s): Effect of failure is unknown\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x02:
PRINT_WARN("(%s): DV Exception - no performance impact\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x03:
PRINT_WARN("(%s): DV Exception on channel interface 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x04:
PRINT_WARN("(%s): DV Exception on loader 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x05:
PRINT_WARN("(%s): DV Exception on message display 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.md[0]);
+ dev_name(&device->cdev->dev), sense->fmt.f71.md[0]);
break;
case 0x06:
PRINT_WARN("(%s): DV Exception in tape path\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x07:
PRINT_WARN("(%s): DV Exception in drive\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
default:
PRINT_WARN("(%s): DSIM ExMsg: 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.emc);
+ dev_name(&device->cdev->dev), sense->fmt.f71.emc);
}
/* Service Message */
switch (sense->fmt.f71.smc) {
case 0x01:
PRINT_WARN("(%s): Repair impact is unknown\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x02:
PRINT_WARN("(%s): Repair will not impact device performance\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x03:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable channel path "
"0x%x on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable channel path "
"(0x%x-0x%x) on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x04:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable interface 0x%x "
"on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable interfaces "
"(0x%x-0x%x) on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x05:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable loader 0x%x "
"on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable loader "
"(0x%x-0x%x) on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x07:
PRINT_WARN("(%s): Repair will disable access to DV\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
break;
case 0x08:
if (sense->fmt.f71.mdf == 0)
PRINT_WARN("(%s): Repair will disable message "
"display 0x%x on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1]);
else
PRINT_WARN("(%s): Repair will disable message "
"displays (0x%x-0x%x) on DV\n",
- device->cdev->dev.bus_id,
+ dev_name(&device->cdev->dev),
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
case 0x09:
- PRINT_WARN("(%s): Clean DV\n", device->cdev->dev.bus_id);
+ PRINT_WARN("(%s): Clean DV\n", dev_name(&device->cdev->dev));
break;
default:
PRINT_WARN("(%s): DSIM ServiceMsg: 0x%02x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.smc);
+ dev_name(&device->cdev->dev), sense->fmt.f71.smc);
}
}
@@ -1279,18 +1282,18 @@
return;
if ((sense->mc > 0) && (sense->mc < TAPE_3590_MAX_MSG)) {
if (tape_3590_msg[sense->mc] != NULL)
- PRINT_WARN("(%s): %s\n", device->cdev->dev.bus_id,
+ PRINT_WARN("(%s): %s\n", dev_name(&device->cdev->dev),
tape_3590_msg[sense->mc]);
else {
PRINT_WARN("(%s): Message Code 0x%x\n",
- device->cdev->dev.bus_id, sense->mc);
+ dev_name(&device->cdev->dev), sense->mc);
}
return;
}
if (sense->mc == 0xf0) {
/* Standard Media Information Message */
PRINT_WARN("(%s): MIM SEV=%i, MC=%02x, ES=%x/%x, "
- "RC=%02x-%04x-%02x\n", device->cdev->dev.bus_id,
+ "RC=%02x-%04x-%02x\n", dev_name(&device->cdev->dev),
sense->fmt.f70.sev, sense->mc,
sense->fmt.f70.emc, sense->fmt.f70.smc,
sense->fmt.f70.refcode, sense->fmt.f70.mid,
@@ -1302,7 +1305,7 @@
/* Standard I/O Subsystem Service Information Message */
PRINT_WARN("(%s): IOSIM SEV=%i, DEVTYPE=3590/%02x, "
"MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.sev,
+ dev_name(&device->cdev->dev), sense->fmt.f71.sev,
device->cdev->id.dev_model,
sense->mc, sense->fmt.f71.emc,
sense->fmt.f71.smc, sense->fmt.f71.refcode1,
@@ -1314,7 +1317,7 @@
/* Standard Device Service Information Message */
PRINT_WARN("(%s): DEVSIM SEV=%i, DEVTYPE=3590/%02x, "
"MC=%02x, ES=%x/%x, REF=0x%04x-0x%04x-0x%04x\n",
- device->cdev->dev.bus_id, sense->fmt.f71.sev,
+ dev_name(&device->cdev->dev), sense->fmt.f71.sev,
device->cdev->id.dev_model,
sense->mc, sense->fmt.f71.emc,
sense->fmt.f71.smc, sense->fmt.f71.refcode1,
@@ -1327,7 +1330,7 @@
return;
}
PRINT_WARN("(%s): Device Message(%x)\n",
- device->cdev->dev.bus_id, sense->mc);
+ dev_name(&device->cdev->dev), sense->mc);
}
static int tape_3590_crypt_error(struct tape_device *device,
@@ -1336,10 +1339,11 @@
u8 cu_rc, ekm_rc1;
u16 ekm_rc2;
u32 drv_rc;
- char *bus_id, *sense;
+ const char *bus_id;
+ char *sense;
sense = ((struct tape_3590_sense *) irb->ecw)->fmt.data;
- bus_id = device->cdev->dev.bus_id;
+ bus_id = dev_name(&device->cdev->dev);
cu_rc = sense[0];
drv_rc = *((u32*) &sense[5]) & 0xffffff;
ekm_rc1 = sense[9];
@@ -1440,7 +1444,7 @@
* "device intervention" is not very meaningfull
*/
PRINT_WARN("(%s): Tape operation when medium not loaded\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
tape_med_state_set(device, MS_UNLOADED);
tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
@@ -1487,18 +1491,18 @@
case 0x6020:
PRINT_WARN("(%s): Cartridge of wrong type ?\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EMEDIUMTYPE);
case 0x8011:
PRINT_WARN("(%s): Another host has reserved the tape device\n",
- device->cdev->dev.bus_id);
+ dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EPERM);
case 0x8013:
PRINT_WARN("(%s): Another host has privileged access to the "
- "tape device\n", device->cdev->dev.bus_id);
+ "tape device\n", dev_name(&device->cdev->dev));
PRINT_WARN("(%s): To solve the problem unload the current "
- "cartridge!\n", device->cdev->dev.bus_id);
+ "cartridge!\n", dev_name(&device->cdev->dev));
return tape_3590_erp_basic(device, request, irb, -EPERM);
default:
return tape_3590_erp_basic(device, request, irb, -EIO);