Merge tag 'regulator-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few fixes for the regulator subsystems, a few driver specific things
plus a fix for the interaction between regultor_can_change_voltage()
and continuous voltage ranges both of which were added for this
release."
* tag 'regulator-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max8998: Ensure enough delay time for max8998_set_voltage_buck_time_sel
regulator: max8998: Use uV in voltage_map_desc
regulator: max8997: Use uV in voltage_map_desc
regulator: core: Fix comment for regulator_register()
regulator: core: Fix continuous_voltage_range case in regulator_can_change_voltage
regulator: s5m8767: Fix probe failure due to stack corruption
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 0f65b24..2785843 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1885,9 +1885,15 @@
struct regulator_dev *rdev = regulator->rdev;
if (rdev->constraints &&
- rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE &&
- (rdev->desc->n_voltages - rdev->desc->linear_min_sel) > 1)
- return 1;
+ (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
+ if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
+ return 1;
+
+ if (rdev->desc->continuous_voltage_range &&
+ rdev->constraints->min_uV && rdev->constraints->max_uV &&
+ rdev->constraints->min_uV != rdev->constraints->max_uV)
+ return 1;
+ }
return 0;
}
@@ -3315,7 +3321,8 @@
* @config: runtime configuration for regulator
*
* Called by regulator drivers to register a regulator.
- * Returns 0 on success.
+ * Returns a valid pointer to struct regulator_dev on success
+ * or an ERR_PTR() on error.
*/
struct regulator_dev *
regulator_register(const struct regulator_desc *regulator_desc,
diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index df0eafb..02be7fc 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -71,26 +71,26 @@
int step;
};
-/* Voltage maps in mV */
+/* Voltage maps in uV */
static const struct voltage_map_desc ldo_voltage_map_desc = {
- .min = 800, .max = 3950, .step = 50,
+ .min = 800000, .max = 3950000, .step = 50000,
}; /* LDO1 ~ 18, 21 all */
static const struct voltage_map_desc buck1245_voltage_map_desc = {
- .min = 650, .max = 2225, .step = 25,
+ .min = 650000, .max = 2225000, .step = 25000,
}; /* Buck1, 2, 4, 5 */
static const struct voltage_map_desc buck37_voltage_map_desc = {
- .min = 750, .max = 3900, .step = 50,
+ .min = 750000, .max = 3900000, .step = 50000,
}; /* Buck3, 7 */
-/* current map in mA */
+/* current map in uA */
static const struct voltage_map_desc charger_current_map_desc = {
- .min = 200, .max = 950, .step = 50,
+ .min = 200000, .max = 950000, .step = 50000,
};
static const struct voltage_map_desc topoff_current_map_desc = {
- .min = 50, .max = 200, .step = 10,
+ .min = 50000, .max = 200000, .step = 10000,
};
static const struct voltage_map_desc *reg_voltage_map[] = {
@@ -194,7 +194,7 @@
if (val > desc->max)
return -EINVAL;
- return val * 1000;
+ return val;
}
static int max8997_get_enable_register(struct regulator_dev *rdev,
@@ -485,7 +485,6 @@
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int i, reg, shift, mask, ret;
@@ -509,7 +508,7 @@
desc = reg_voltage_map[rid];
- i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (i < 0)
return i;
@@ -557,7 +556,7 @@
case MAX8997_BUCK4:
case MAX8997_BUCK5:
return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
- max8997->ramp_delay);
+ max8997->ramp_delay * 1000);
}
return 0;
@@ -656,7 +655,6 @@
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
bool gpio_dvs_mode = false;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
return -EINVAL;
@@ -681,7 +679,7 @@
selector);
desc = reg_voltage_map[rid];
- new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (new_val < 0)
return new_val;
@@ -1123,8 +1121,8 @@
max8997->buck1_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck1_voltage[i] / 1000,
- pdata->buck1_voltage[i] / 1000 +
+ pdata->buck1_voltage[i],
+ pdata->buck1_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
@@ -1132,8 +1130,8 @@
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck2_voltage[i] / 1000,
- pdata->buck2_voltage[i] / 1000 +
+ pdata->buck2_voltage[i],
+ pdata->buck2_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
@@ -1141,8 +1139,8 @@
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck5_voltage[i] / 1000,
- pdata->buck5_voltage[i] / 1000 +
+ pdata->buck5_voltage[i],
+ pdata->buck5_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index b821d08..1f0df40 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -51,39 +51,39 @@
int step;
};
-/* Voltage maps */
+/* Voltage maps in uV*/
static const struct voltage_map_desc ldo23_voltage_map_desc = {
- .min = 800, .step = 50, .max = 1300,
+ .min = 800000, .step = 50000, .max = 1300000,
};
static const struct voltage_map_desc ldo456711_voltage_map_desc = {
- .min = 1600, .step = 100, .max = 3600,
+ .min = 1600000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc ldo8_voltage_map_desc = {
- .min = 3000, .step = 100, .max = 3600,
+ .min = 3000000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc ldo9_voltage_map_desc = {
- .min = 2800, .step = 100, .max = 3100,
+ .min = 2800000, .step = 100000, .max = 3100000,
};
static const struct voltage_map_desc ldo10_voltage_map_desc = {
- .min = 950, .step = 50, .max = 1300,
+ .min = 95000, .step = 50000, .max = 1300000,
};
static const struct voltage_map_desc ldo1213_voltage_map_desc = {
- .min = 800, .step = 100, .max = 3300,
+ .min = 800000, .step = 100000, .max = 3300000,
};
static const struct voltage_map_desc ldo1415_voltage_map_desc = {
- .min = 1200, .step = 100, .max = 3300,
+ .min = 1200000, .step = 100000, .max = 3300000,
};
static const struct voltage_map_desc ldo1617_voltage_map_desc = {
- .min = 1600, .step = 100, .max = 3600,
+ .min = 1600000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc buck12_voltage_map_desc = {
- .min = 750, .step = 25, .max = 1525,
+ .min = 750000, .step = 25000, .max = 1525000,
};
static const struct voltage_map_desc buck3_voltage_map_desc = {
- .min = 1600, .step = 100, .max = 3600,
+ .min = 1600000, .step = 100000, .max = 3600000,
};
static const struct voltage_map_desc buck4_voltage_map_desc = {
- .min = 800, .step = 100, .max = 2300,
+ .min = 800000, .step = 100000, .max = 2300000,
};
static const struct voltage_map_desc *ldo_voltage_map[] = {
@@ -445,9 +445,9 @@
if (max8998->iodev->type == TYPE_MAX8998 && !(val & MAX8998_ENRAMP))
return 0;
- difference = (new_selector - old_selector) * desc->step;
+ difference = (new_selector - old_selector) * desc->step / 1000;
if (difference > 0)
- return difference / ((val & 0x0f) + 1);
+ return DIV_ROUND_UP(difference, (val & 0x0f) + 1);
return 0;
}
@@ -702,7 +702,7 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage1 / 1000))
+ < pdata->buck1_voltage1)
i++;
max8998->buck1_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i);
@@ -713,7 +713,7 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage2 / 1000))
+ < pdata->buck1_voltage2)
i++;
max8998->buck1_vol[1] = i;
@@ -725,7 +725,7 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage3 / 1000))
+ < pdata->buck1_voltage3)
i++;
max8998->buck1_vol[2] = i;
@@ -737,7 +737,7 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck1_voltage4 / 1000))
+ < pdata->buck1_voltage4)
i++;
max8998->buck1_vol[3] = i;
@@ -763,7 +763,7 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck2_voltage1 / 1000))
+ < pdata->buck2_voltage1)
i++;
max8998->buck2_vol[0] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i);
@@ -774,7 +774,7 @@
i = 0;
while (buck12_voltage_map_desc.min +
buck12_voltage_map_desc.step*i
- < (pdata->buck2_voltage2 / 1000))
+ < pdata->buck2_voltage2)
i++;
max8998->buck2_vol[1] = i;
ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i);
@@ -792,8 +792,8 @@
int count = (desc->max - desc->min) / desc->step + 1;
regulators[index].n_voltages = count;
- regulators[index].min_uV = desc->min * 1000;
- regulators[index].uV_step = desc->step * 1000;
+ regulators[index].min_uV = desc->min;
+ regulators[index].uV_step = desc->step;
}
config.dev = max8998->dev;
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 9f991f2..33b65c9 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -214,7 +214,7 @@
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int ret, reg;
int mask = 0xc0, enable_ctrl;
- u8 val;
+ unsigned int val;
ret = s5m8767_get_register(rdev, ®, &enable_ctrl);
if (ret == -EINVAL)
@@ -306,7 +306,7 @@
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int reg, mask, ret;
int reg_id = rdev_get_id(rdev);
- u8 val;
+ unsigned int val;
ret = s5m8767_get_voltage_register(rdev, ®);
if (ret)