net: Move sungem_phy.h under include/linux
Fixes build failures of the spider_net driver because it tries
to use a convoluted path to include this header.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c
index ade35dd..0f13c5d 100644
--- a/drivers/net/ethernet/sun/sungem.c
+++ b/drivers/net/ethernet/sun/sungem.c
@@ -59,7 +59,7 @@
#include <asm/pmac_feature.h>
#endif
-#include "sungem_phy.h"
+#include <linux/sungem_phy.h>
#include "sungem.h"
/* Stripping FCS is causing problems, disabled for now */
diff --git a/drivers/net/ethernet/sun/sungem_phy.h b/drivers/net/ethernet/sun/sungem_phy.h
deleted file mode 100644
index af02f94..0000000
--- a/drivers/net/ethernet/sun/sungem_phy.h
+++ /dev/null
@@ -1,132 +0,0 @@
-#ifndef __SUNGEM_PHY_H__
-#define __SUNGEM_PHY_H__
-
-struct mii_phy;
-
-/* Operations supported by any kind of PHY */
-struct mii_phy_ops
-{
- int (*init)(struct mii_phy *phy);
- int (*suspend)(struct mii_phy *phy);
- int (*setup_aneg)(struct mii_phy *phy, u32 advertise);
- int (*setup_forced)(struct mii_phy *phy, int speed, int fd);
- int (*poll_link)(struct mii_phy *phy);
- int (*read_link)(struct mii_phy *phy);
- int (*enable_fiber)(struct mii_phy *phy, int autoneg);
-};
-
-/* Structure used to statically define an mii/gii based PHY */
-struct mii_phy_def
-{
- u32 phy_id; /* Concatenated ID1 << 16 | ID2 */
- u32 phy_id_mask; /* Significant bits */
- u32 features; /* Ethtool SUPPORTED_* defines */
- int magic_aneg; /* Autoneg does all speed test for us */
- const char* name;
- const struct mii_phy_ops* ops;
-};
-
-enum {
- BCM54XX_COPPER,
- BCM54XX_FIBER,
- BCM54XX_GBIC,
- BCM54XX_SGMII,
- BCM54XX_UNKNOWN,
-};
-
-/* An instance of a PHY, partially borrowed from mii_if_info */
-struct mii_phy
-{
- struct mii_phy_def* def;
- u32 advertising;
- int mii_id;
-
- /* 1: autoneg enabled, 0: disabled */
- int autoneg;
-
- /* forced speed & duplex (no autoneg)
- * partner speed & duplex & pause (autoneg)
- */
- int speed;
- int duplex;
- int pause;
-
- /* Provided by host chip */
- struct net_device *dev;
- int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
- void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
- void *platform_data;
-};
-
-/* Pass in a struct mii_phy with dev, mdio_read and mdio_write
- * filled, the remaining fields will be filled on return
- */
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
-
-
-/* MII definitions missing from mii.h */
-
-#define BMCR_SPD2 0x0040 /* Gigabit enable (bcm54xx) */
-#define LPA_PAUSE 0x0400
-
-/* More PHY registers (model specific) */
-
-/* MII BCM5201 MULTIPHY interrupt register */
-#define MII_BCM5201_INTERRUPT 0x1A
-#define MII_BCM5201_INTERRUPT_INTENABLE 0x4000
-
-#define MII_BCM5201_AUXMODE2 0x1B
-#define MII_BCM5201_AUXMODE2_LOWPOWER 0x0008
-
-#define MII_BCM5201_MULTIPHY 0x1E
-
-/* MII BCM5201 MULTIPHY register bits */
-#define MII_BCM5201_MULTIPHY_SERIALMODE 0x0002
-#define MII_BCM5201_MULTIPHY_SUPERISOLATE 0x0008
-
-/* MII BCM5221 Additional registers */
-#define MII_BCM5221_TEST 0x1f
-#define MII_BCM5221_TEST_ENABLE_SHADOWS 0x0080
-#define MII_BCM5221_SHDOW_AUX_STAT2 0x1b
-#define MII_BCM5221_SHDOW_AUX_STAT2_APD 0x0020
-#define MII_BCM5221_SHDOW_AUX_MODE4 0x1a
-#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE 0x0001
-#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR 0x0004
-
-/* MII BCM5241 Additional registers */
-#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR 0x0008
-
-/* MII BCM5400 1000-BASET Control register */
-#define MII_BCM5400_GB_CONTROL 0x09
-#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200
-
-/* MII BCM5400 AUXCONTROL register */
-#define MII_BCM5400_AUXCONTROL 0x18
-#define MII_BCM5400_AUXCONTROL_PWR10BASET 0x0004
-
-/* MII BCM5400 AUXSTATUS register */
-#define MII_BCM5400_AUXSTATUS 0x19
-#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK 0x0700
-#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT 8
-
-/* 1000BT control (Marvell & BCM54xx at least) */
-#define MII_1000BASETCONTROL 0x09
-#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200
-#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100
-
-/* Marvell 88E1011 PHY control */
-#define MII_M1011_PHY_SPEC_CONTROL 0x10
-#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX 0x20
-#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX 0x40
-
-/* Marvell 88E1011 PHY status */
-#define MII_M1011_PHY_SPEC_STATUS 0x11
-#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000
-#define MII_M1011_PHY_SPEC_STATUS_100 0x4000
-#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000
-#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000
-#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800
-#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE 0x0008
-#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE 0x0004
-
-#endif /* __SUNGEM_PHY_H__ */