wireless: add new wil6210 802.11ad 60GHz driver
This adds support for the 60 GHz 802.11ad Wilocity card
through a new driver, wil6210. Wilocity implemented the
firmware, QCA maintains the device driver.
Currently supported:
- STA: with security
- AP: limited to 1 connected STA, security disabled
- Monitor: due to a hardware/firmware limitation
either control or non-control frames are monitored
Using a STA and AP with this drive, one can assemble
a fully functional BSS. Throughput of 1.2Gbps is achieved
with iperf.
The wil6210 cards have on-board flash memory for the
firmware, the cards comes pre-flashed and no firmware
download is required.
For more details see:
http://wireless.kernel.org/en/users/Drivers/wil6210
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
new file mode 100644
index 0000000..bac3d98
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -0,0 +1,29 @@
+config WIL6210
+ tristate "Wilocity 60g WiFi card wil6210 support"
+ depends on CFG80211
+ depends on PCI
+ default n
+ ---help---
+ This module adds support for wireless adapter based on
+ wil6210 chip by Wilocity. It supports operation on the
+ 60 GHz band, covered by the IEEE802.11ad standard.
+
+ http://wireless.kernel.org/en/users/Drivers/wil6210
+
+ If you choose to build it as a module, it will be called
+ wil6210
+
+config WIL6210_ISR_COR
+ bool "Use Clear-On-Read mode for ISR registers for wil6210"
+ depends on WIL6210
+ default y
+ ---help---
+ ISR registers on wil6210 chip may operate in either
+ COR (Clear-On-Read) or W1C (Write-1-to-Clear) mode.
+ For production code, use COR (say y); is default since
+ it saves extra target transaction;
+ For ISR debug, use W1C (say n); is allows to monitor ISR
+ registers with debugfs. If COR were used, ISR would
+ self-clear when accessed for debug purposes, it makes
+ such monitoring impossible.
+ Say y unless you debug interrupts