wireless: add new wil6210 802.11ad 60GHz driver
This adds support for the 60 GHz 802.11ad Wilocity card
through a new driver, wil6210. Wilocity implemented the
firmware, QCA maintains the device driver.
Currently supported:
- STA: with security
- AP: limited to 1 connected STA, security disabled
- Monitor: due to a hardware/firmware limitation
either control or non-control frames are monitored
Using a STA and AP with this drive, one can assemble
a fully functional BSS. Throughput of 1.2Gbps is achieved
with iperf.
The wil6210 cards have on-board flash memory for the
firmware, the cards comes pre-flashed and no firmware
download is required.
For more details see:
http://wireless.kernel.org/en/users/Drivers/wil6210
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
new file mode 100644
index 0000000..6a315ba
--- /dev/null
+++ b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
@@ -0,0 +1,30 @@
+#ifndef WIL_DBG_HEXDUMP_H_
+#define WIL_DBG_HEXDUMP_H_
+
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+do { \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, \
+ __builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
+ print_hex_dump(KERN_DEBUG, prefix_str, \
+ prefix_type, rowsize, groupsize, \
+ buf, len, ascii); \
+} while (0)
+
+#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+
+#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \
+ wil_dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
+#else /* defined(CONFIG_DYNAMIC_DEBUG) */
+#define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii) \
+ print_hex_dump(KERN_DEBUG, prefix_str, prefix_type, rowsize, \
+ groupsize, buf, len, ascii)
+#endif /* defined(CONFIG_DYNAMIC_DEBUG) */
+
+#endif /* WIL_DBG_HEXDUMP_H_ */