igbvf: work around i350 erratum
On i350 VF devices, VLAN tags will be byte-swapped in the receive
descriptor only when received packets are looped back from other
VFs. Check for this condition and swab the tag if needed.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 4051ec4..b44b9d3 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -107,12 +107,19 @@
struct sk_buff *skb,
u32 status, u16 vlan)
{
+ u16 vid;
+
if (status & E1000_RXD_STAT_VP) {
- u16 vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+ if ((adapter->flags & IGBVF_FLAG_RX_LB_VLAN_BSWAP) &&
+ (status & E1000_RXDEXT_STATERR_LB))
+ vid = be16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+ else
+ vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
if (test_bit(vid, adapter->active_vlans))
__vlan_hwaccel_put_tag(skb, vid);
}
- netif_receive_skb(skb);
+
+ napi_gro_receive(&adapter->rx_ring->napi, skb);
}
static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
@@ -2767,6 +2774,10 @@
/* reset the hardware with the new settings */
igbvf_reset(adapter);
+ /* set hardware-specific flags */
+ if (adapter->hw.mac.type == e1000_vfadapt_i350)
+ adapter->flags |= IGBVF_FLAG_RX_LB_VLAN_BSWAP;
+
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err)