ARM: dts: vexpress: fix node name unit-address presence warnings
Commit b993734718c0 ("scripts/dtc: Update to upstream version 53bf130b1cdd")
added warnings on node name unit-address presence/absence mismatch in
the device trees.
This patch fixes those warning on all the vexpress platforms where
unit-address is present in node name while the reg/ranges property is
not present.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index d949fac..cbf658b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -190,7 +190,7 @@
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
- osc@0 {
+ oscclk0: extsaxiclk {
/* ACLK clock to the AXI master port on the test chip */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
@@ -199,7 +199,7 @@
clock-output-names = "extsaxiclk";
};
- oscclk1: osc@1 {
+ oscclk1: clcdclk {
/* Reference clock for the CLCD */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
@@ -208,7 +208,7 @@
clock-output-names = "clcdclk";
};
- smbclk: oscclk2: osc@2 {
+ smbclk: oscclk2: tcrefclk {
/* Reference clock for the test chip internal PLLs */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 2>;
@@ -217,7 +217,7 @@
clock-output-names = "tcrefclk";
};
- volt@0 {
+ volt-vd10 {
/* Test Chip internal logic voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 0>;
@@ -226,7 +226,7 @@
label = "VD10";
};
- volt@1 {
+ volt-vd10-s2 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 1>;
@@ -235,7 +235,7 @@
label = "VD10_S2";
};
- volt@2 {
+ volt-vd10-s3 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 2>;
@@ -244,7 +244,7 @@
label = "VD10_S3";
};
- volt@3 {
+ volt-vcc1v8 {
/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 3>;
@@ -253,7 +253,7 @@
label = "VCC1V8";
};
- volt@4 {
+ volt-ddr2vtt {
/* DDR2 SDRAM VTT termination voltage */
compatible = "arm,vexpress-volt";
arm,vexpress-sysreg,func = <2 4>;
@@ -262,7 +262,7 @@
label = "DDR2VTT";
};
- volt@5 {
+ volt-vcc3v3 {
/* Local board supply for miscellaneous logic external to the Test Chip */
arm,vexpress-sysreg,func = <2 5>;
compatible = "arm,vexpress-volt";
@@ -271,28 +271,28 @@
label = "VCC3V3";
};
- amp@0 {
+ amp-vd10-s2 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 0>;
label = "VD10_S2";
};
- amp@1 {
+ amp-vd10-s3 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-amp";
arm,vexpress-sysreg,func = <3 1>;
label = "VD10_S3";
};
- power@0 {
+ power-vd10-s2 {
/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 0>;
label = "PVD10_S2";
};
- power@1 {
+ power-vd10-s3 {
/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
compatible = "arm,vexpress-power";
arm,vexpress-sysreg,func = <12 1>;
@@ -300,7 +300,7 @@
};
};
- smb {
+ smb@04000000 {
compatible = "simple-bus";
#address-cells = <2>;