Merge branch 'next' into for-linus
Prepare first set of updates for 3.9 merge window.
diff --git a/drivers/input/input.c b/drivers/input/input.c
index ce01332f..c044699 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1785,12 +1785,13 @@
* its driver (or binding fails). Once managed input device is allocated,
* it is ready to be set up and registered in the same fashion as regular
* input device. There are no special devm_input_device_[un]register()
- * variants, regular ones work with both managed and unmanaged devices.
+ * variants, regular ones work with both managed and unmanaged devices,
+ * should you need them. In most cases however, managed input device need
+ * not be explicitly unregistered or freed.
*
* NOTE: the owner device is set up as parent of input device and users
* should not override it.
*/
-
struct input_dev *devm_input_allocate_device(struct device *dev)
{
struct input_dev *input;
@@ -2004,6 +2005,17 @@
* Once device has been successfully registered it can be unregistered
* with input_unregister_device(); input_free_device() should not be
* called in this case.
+ *
+ * Note that this function is also used to register managed input devices
+ * (ones allocated with devm_input_allocate_device()). Such managed input
+ * devices need not be explicitly unregistered or freed, their tear down
+ * is controlled by the devres infrastructure. It is also worth noting
+ * that tear down of managed input devices is internally a 2-step process:
+ * registered managed input device is first unregistered, but stays in
+ * memory and can still handle input_event() calls (although events will
+ * not be delivered anywhere). The freeing of managed input device will
+ * happen later, when devres stack is unwound to the point where device
+ * allocation was made.
*/
int input_register_device(struct input_dev *dev)
{
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 83811e4..d6cbfe9 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -118,11 +118,12 @@
u8 xtype;
} xpad_device[] = {
{ 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", 0, XTYPE_XBOX },
- { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
{ 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", 0, XTYPE_XBOX },
{ 0x045e, 0x0287, "Microsoft Xbox Controller S", 0, XTYPE_XBOX },
+ { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", 0, XTYPE_XBOX },
+ { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+ { 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
- { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
{ 0x046d, 0xc242, "Logitech Chillstream Controller", 0, XTYPE_XBOX360 },
{ 0x046d, 0xca84, "Logitech Xbox Cordless Controller", 0, XTYPE_XBOX },
@@ -136,9 +137,12 @@
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", 0, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", XTYPE_XBOX360 },
{ 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
+ { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", DANCEPAD_MAP_CONFIG, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
@@ -148,24 +152,28 @@
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0005, "Eclipse wireless Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0006, "Edge wireless Controller", 0, XTYPE_XBOX },
- { 0x0e6f, 0x0006, "Pelican 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0e6f, 0x0201, "Pelican PL-3601 'TSZ' Wired Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x0e6f, 0x0213, "Afterglow Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
{ 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", 0, XTYPE_XBOX },
+ { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
{ 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", 0, XTYPE_XBOX },
- { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
- { 0x0e6f, 0x0105, "HSM3 Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", 0, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
- { 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
+ { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
- { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
- { 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
- { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1bad, 0xf016, "Mad Catz Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf028, "Street Fighter IV FightPad", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf901, "Gamestop Xbox 360 Controller", 0, XTYPE_XBOX360 },
+ { 0x1bad, 0xf903, "Tron Xbox 360 controller", 0, XTYPE_XBOX360 },
+ { 0x24c6, 0x5300, "PowerA MINI PROEX Controller", 0, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
@@ -235,7 +243,7 @@
{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
-static struct usb_device_id xpad_table [] = {
+static struct usb_device_id xpad_table[] = {
{ USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
@@ -248,10 +256,11 @@
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
+ XPAD_XBOX360_VENDOR(0x24c6), /* PowerA Controllers */
{ }
};
-MODULE_DEVICE_TABLE (usb, xpad_table);
+MODULE_DEVICE_TABLE(usb, xpad_table);
struct usb_xpad {
struct input_dev *dev; /* input device interface */
@@ -783,7 +792,7 @@
struct usb_xpad *xpad = input_get_drvdata(dev);
/* URB was submitted in probe */
- if(xpad->xtype == XTYPE_XBOX360W)
+ if (xpad->xtype == XTYPE_XBOX360W)
return 0;
xpad->irq_in->dev = xpad->udev;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index d327f5a..b29ca65 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -602,6 +602,7 @@
i = 0;
for_each_child_of_node(node, pp) {
+ int gpio;
enum of_gpio_flags flags;
if (!of_find_property(pp, "gpios", NULL)) {
@@ -610,9 +611,19 @@
continue;
}
+ gpio = of_get_gpio_flags(pp, 0, &flags);
+ if (gpio < 0) {
+ error = gpio;
+ if (error != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to get gpio flags, error: %d\n",
+ error);
+ goto err_free_pdata;
+ }
+
button = &pdata->buttons[i++];
- button->gpio = of_get_gpio_flags(pp, 0, &flags);
+ button->gpio = gpio;
button->active_low = flags & OF_GPIO_ACTIVE_LOW;
if (of_property_read_u32(pp, "linux,code", &button->code)) {
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index f686fd9..2114716 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -135,6 +135,7 @@
i = 0;
for_each_child_of_node(node, pp) {
+ int gpio;
enum of_gpio_flags flags;
if (!of_find_property(pp, "gpios", NULL)) {
@@ -143,9 +144,19 @@
continue;
}
+ gpio = of_get_gpio_flags(pp, 0, &flags);
+ if (gpio < 0) {
+ error = gpio;
+ if (error != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to get gpio flags, error: %d\n",
+ error);
+ goto err_free_pdata;
+ }
+
button = &pdata->buttons[i++];
- button->gpio = of_get_gpio_flags(pp, 0, &flags);
+ button->gpio = gpio;
button->active_low = flags & OF_GPIO_ACTIVE_LOW;
if (of_property_read_u32(pp, "linux,code", &button->code)) {
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 93c8126..0de23f4 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -398,7 +398,7 @@
lm8323_configure(lm);
}
for (i = 0; i < LM8323_NUM_PWMS; i++) {
- if (ints & (1 << (INT_PWM1 + i))) {
+ if (ints & (INT_PWM1 << i)) {
dev_vdbg(&lm->client->dev,
"pwm%d engine completed\n", i);
pwm_done(&lm->pwm[i]);
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
index 419cb6b..3ae496e 100644
--- a/drivers/input/matrix-keymap.c
+++ b/drivers/input/matrix-keymap.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/of.h>
#include <linux/export.h>
+#include <linux/module.h>
#include <linux/input/matrix_keypad.h>
static bool matrix_keypad_map_key(struct input_dev *input_dev,
@@ -182,3 +183,5 @@
return 0;
}
EXPORT_SYMBOL(matrix_keypad_build_keymap);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index e582922..cc7e0d4 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -791,7 +791,7 @@
fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y);
fsp_set_slot(dev, 1, false, 0, 0);
}
- if (fgrs > 0) {
+ if (fgrs == 1 || (fgrs == 2 && !(packet[0] & FSP_PB0_MFMC_FGR2))) {
input_report_abs(dev, ABS_X, abs_x);
input_report_abs(dev, ABS_Y, abs_y);
}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index f92d34f..aaf23ae 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -553,10 +553,10 @@
if (!rep_data)
return error;
- rep_data[0] = report_id;
- rep_data[1] = mode;
-
do {
+ rep_data[0] = report_id;
+ rep_data[1] = mode;
+
error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
report_id, rep_data, length, 1);
if (error >= 0)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index ad11ec5..41b6fbf 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -2036,7 +2036,8 @@
.touch_max = 2 };
static const struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,