diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt
deleted file mode 100644
index 1d8af9e..0000000
--- a/Documentation/devicetree/bindings/arm/adapteva.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Adapteva Platforms Device Tree Bindings
----------------------------------------
-
-Parallella board
-
-Required root node properties:
-    - compatible = "adapteva,parallella";
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
index 6988056..b5c2b5c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ b/Documentation/devicetree/bindings/arm/amlogic.txt
@@ -41,6 +41,14 @@
   Required root node property:
     compatible: "amlogic,s905d", "amlogic,meson-gxl";
 
+Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,s805x", "amlogic,meson-gxl";
+
+Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
+  Required root node property:
+    compatible: "amlogic,s905w", "amlogic,meson-gxl";
+
 Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,s912", "amlogic,meson-gxm";
@@ -79,6 +87,11 @@
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
 
+  - "amlogic,p241" (Meson gxl s805x)
+
+  - "amlogic,p281" (Meson gxl s905w)
+  - "oranth,tx3-mini" (Meson gxl s905w)
+
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
   - "khadas,vim2" (Meson gxm s912)
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
deleted file mode 100644
index 795cc78..0000000
--- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Power Management Controller (PMC)
-
-Required properties:
-- compatible: Should be "atmel,<chip>-pmc".
-	<chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
-	at91sam9x5, sama5d3
-
-- reg: Should contain PMC registers location and length
-
-Examples:
-	pmc: pmc@fffffc00 {
-		compatible = "atmel,at91rm9200-pmc";
-		reg = <0xfffffc00 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 29e1dc5..96dfccc 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -183,6 +183,7 @@
 			    "marvell,sheeva-v5"
 			    "nvidia,tegra132-denver"
 			    "nvidia,tegra186-denver"
+			    "nvidia,tegra194-carmel"
 			    "qcom,krait"
 			    "qcom,kryo"
 			    "qcom,kryo385"
@@ -219,6 +220,7 @@
 			    "qcom,kpss-acc-v1"
 			    "qcom,kpss-acc-v2"
 			    "renesas,apmu"
+			    "renesas,r9a06g032-smp"
 			    "rockchip,rk3036-smp"
 			    "rockchip,rk3066-smp"
 			    "ste,dbx500-smp"
diff --git a/Documentation/devicetree/bindings/arm/freescale/m4if.txt b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
new file mode 100644
index 0000000..93bd7b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
@@ -0,0 +1,12 @@
+* Freescale Multi Master Multi Memory Interface (M4IF) module
+
+Required properties:
+- compatible : Should be "fsl,imx51-m4if"
+- reg : Address and length of the register set for the device
+
+Example:
+
+m4if: m4if@83fd8000 {
+	compatible = "fsl,imx51-m4if";
+	reg = <0x83fd8000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/freescale/tigerp.txt b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
new file mode 100644
index 0000000..19e2aad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
@@ -0,0 +1,12 @@
+* Freescale Tigerp platform module
+
+Required properties:
+- compatible : Should be "fsl,imx51-tigerp"
+- reg : Address and length of the register set for the device
+
+Example:
+
+tigerp: tigerp@83fa0000 {
+	compatible = "fsl,imx51-tigerp";
+	reg = <0x83fa0000 0x28>;
+};
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index cdb9dd7..8a1baa2 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -53,6 +53,10 @@
 Required root node properties:
     - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 
+i.MX6SLL EVK board
+Required root node properties:
+    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
 Generic i.MX boards
 -------------------
 
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt
deleted file mode 100644
index 524c3dc..0000000
--- a/Documentation/devicetree/bindings/arm/insignal-boards.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-* Insignal's Exynos4210 based Origen evaluation board
-
-Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC.
-
-Required root node properties:
-    - compatible = should be one or more of the following.
-        (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
-        (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index 48fac4e..8f260e5 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -51,6 +51,9 @@
 - Evaluation board for MT6797(Helio X20):
     Required root node properties:
       - compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
+- Mediatek X20 Development Board:
+    Required root node properties:
+      - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
 - Reference board variant 1 for MT7622:
     Required root node properties:
       - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
@@ -63,9 +66,6 @@
 - Reference board for MT7623n with eMMC:
     Required root node properties:
       - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
-- Reference  board for MT7623n with NAND:
-    Required root node properties:
-      - compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
 - Bananapi BPI-R2 board:
       - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
 - MTK mt8127 tablet moose EVB:
diff --git a/Documentation/devicetree/bindings/arm/omap/l4.txt b/Documentation/devicetree/bindings/arm/omap/l4.txt
index b4f8a16..6816adc 100644
--- a/Documentation/devicetree/bindings/arm/omap/l4.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l4.txt
@@ -7,6 +7,7 @@
 	       Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
 	       Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
 	       Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
+	       Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus
 	       Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
 	       Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
 	       Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
@@ -15,11 +16,21 @@
 	       Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
 	       Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
 - ranges : contains the IO map range for the bus
+- reg : registers link agent and interconnect agent and access protection
+- reg-names : "la" for link agent, "ia0" to "ia3" for one to three
+              interconnect agent instances, "ap" for access if it exists
 
 Examples:
 
-l4: l4@48000000 {
-	compatible "ti,omap2-l4", "simple-bus";
+l4: interconnect@48000000 {
+	compatible "ti,omap4-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0 0x48000000 0x100000>;
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index 1c1d62d..acfd3c7 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,5 +1,10 @@
 Rockchip platforms device tree bindings
 ---------------------------------------
+
+- 96boards RK3399 Ficus (ROCK960 Enterprise Edition)
+    Required root node properties:
+      - compatible = "vamrs,ficus", "rockchip,rk3399";
+
 - Amarula Vyasa RK3288 board
     Required root node properties:
       - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
@@ -66,6 +71,15 @@
     Required root node properties:
       - compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
+- Google Bob (Asus Chromebook Flip C101PA):
+    Required root node properties:
+	compatible = "google,bob-rev13", "google,bob-rev12",
+		     "google,bob-rev11", "google,bob-rev10",
+		     "google,bob-rev9", "google,bob-rev8",
+		     "google,bob-rev7", "google,bob-rev6",
+		     "google,bob-rev5", "google,bob-rev4",
+		     "google,bob", "google,gru", "rockchip,rk3399";
+
 - Google Brain (dev-board):
     Required root node properties:
       - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 6970f30..56021bf 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -1,7 +1,10 @@
-* Samsung's Exynos SoC based boards
+* Samsung's Exynos and S5P SoC based boards
 
 Required root node properties:
     - compatible = should be one or more of the following.
+	- "samsung,aries"	- for S5PV210-based Samsung Aries board.
+	- "samsung,fascinate4g"	- for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board.
+	- "samsung,galaxys"	- for S5PV210-based Samsung Galaxy S (i9000)  board.
 	- "samsung,artik5"	- for Exynos3250-based Samsung ARTIK5 module.
 	- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
 	- "samsung,monk"	- for Exynos3250-based Samsung Simband board.
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index d8cf740..89b4a38 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -51,7 +51,8 @@
     compatible = "renesas,r8a77990"
   - R-Car D3 (R8A77995)
     compatible = "renesas,r8a77995"
-
+  - RZ/N1D (R9A06G032)
+    compatible = "renesas,r9a06g032"
 
 Boards:
 
@@ -112,6 +113,8 @@
     compatible = "renesas,porter", "renesas,r8a7791"
   - RSKRZA1 (YR0K77210C000BE)
     compatible = "renesas,rskrza1", "renesas,r7s72100"
+  - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
+    compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"
   - Salvator-X (RTP0RC7795SIPB0010S)
     compatible = "renesas,salvator-x", "renesas,r8a7795"
   - Salvator-X (RTP0RC7796SIPB0011S)
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt
new file mode 100644
index 0000000..6a059ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ti/k3.txt
@@ -0,0 +1,23 @@
+Texas Instruments K3 Multicore SoC architecture device tree bindings
+--------------------------------------------------------------------
+
+Platforms based on Texas Instruments K3 Multicore SoC architecture
+shall follow the following scheme:
+
+SoCs
+----
+
+Each device tree root node must specify which exact SoC in K3 Multicore SoC
+architecture it uses, using one of the following compatible values:
+
+- AM654
+  compatible = "ti,am654";
+
+Boards
+------
+
+In addition, each device tree root node must specify which one or more
+of the following board-specific compatible values:
+
+- AM654 EVM
+  compatible = "ti,am654-evm", "ti,am654";
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
index b9043bc..26fe5ec 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.txt
+++ b/Documentation/devicetree/bindings/arm/xilinx.txt
@@ -8,18 +8,38 @@
 
 Additional compatible strings:
 
-- Xilinx internal board cc108
+- Adapteva Parallella board
+  "adapteva,parallella"
+
+- Avnet MicroZed board
+  "avnet,zynq-microzed"
+  "xlnx,zynq-microzed"
+
+- Avnet ZedBoard board
+  "avnet,zynq-zed"
+  "xlnx,zynq-zed"
+
+- Digilent Zybo board
+  "digilent,zynq-zybo"
+
+- Digilent Zybo Z7 board
+  "digilent,zynq-zybo-z7"
+
+- Xilinx CC108 internal board
   "xlnx,zynq-cc108"
 
-- Xilinx internal board zc770 with different FMC cards
+- Xilinx ZC702 internal board
+  "xlnx,zynq-zc702"
+
+- Xilinx ZC706 internal board
+  "xlnx,zynq-zc706"
+
+- Xilinx ZC770 internal board, with different FMC cards
   "xlnx,zynq-zc770-xm010"
   "xlnx,zynq-zc770-xm011"
   "xlnx,zynq-zc770-xm012"
   "xlnx,zynq-zc770-xm013"
 
-- Digilent Zybo Z7 board
-  "digilent,zynq-zybo-z7"
-
 ---------------------------------------------------------------
 
 Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 09968ee..8f8f950 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -17,14 +17,13 @@
 	"atmel,at91sam9x5-clk-slow-rc-osc":
 		at91 internal slow RC oscillator
 
-	"atmel,at91rm9200-pmc" or
-	"atmel,at91sam9g45-pmc" or
-	"atmel,at91sam9n12-pmc" or
-	"atmel,at91sam9x5-pmc" or
-	"atmel,sama5d3-pmc":
+	"atmel,<chip>-pmc":
 		at91 PMC (Power Management Controller)
 		All at91 specific clocks (clocks defined below) must be child
 		node of the PMC node.
+		<chip> can be: at91rm9200, at91sam9260, at91sam9261,
+		at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
+		sama5d2, sama5d3 or sama5d4.
 
 	"atmel,at91sam9x5-clk-slow" (under sckc node)
 	or
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
index 53c20ca..df5db73 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
@@ -40,6 +40,7 @@
 Required properties:
 - compatible : must be one of the following string:
 	"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
+	"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
 	"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
 - reg : m4u register base and size.
 - interrupts : the interrupt of m4u.
@@ -50,8 +51,9 @@
 	according to the local arbiter index, like larb0, larb1, larb2...
 - iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
 	Specifies the mtk_m4u_id as defined in
-	dt-binding/memory/mt2701-larb-port.h for mt2701 and
-	dt-binding/memory/mt8173-larb-port.h for mt8173
+	dt-binding/memory/mt2701-larb-port.h for mt2701,
+	dt-binding/memory/mt2712-larb-port.h for mt2712, and
+	dt-binding/memory/mt8173-larb-port.h for mt8173.
 
 Example:
 	iommu: iommu@10205000 {
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
index aa614b2..615abdd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.txt
@@ -2,8 +2,9 @@
 
 The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
 
-Mediatek SMI have two generations of HW architecture, mt8173 uses the second
-generation of SMI HW while mt2701 uses the first generation HW of SMI.
+Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use
+the second generation of SMI HW while mt2701 uses the first generation HW of
+SMI.
 
 There's slight differences between the two SMI, for generation 2, the
 register which control the iommu port is at each larb's register base. But
@@ -15,6 +16,7 @@
 Required properties:
 - compatible : must be one of :
 	"mediatek,mt2701-smi-common"
+	"mediatek,mt2712-smi-common"
 	"mediatek,mt8173-smi-common"
 - reg : the register and size of the SMI block.
 - power-domains : a phandle to the power domain of this local arbiter.
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
index ddf46b8..083155c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
@@ -4,8 +4,9 @@
 
 Required properties:
 - compatible : must be one of :
-		"mediatek,mt8173-smi-larb"
 		"mediatek,mt2701-smi-larb"
+		"mediatek,mt2712-smi-larb"
+		"mediatek,mt8173-smi-larb"
 - reg : the register and size of this local arbiter.
 - mediatek,smi : a phandle to the smi_common node.
 - power-domains : a phandle to the power domain of this local arbiter.
@@ -15,7 +16,7 @@
 	    the register.
   - "smi" : It's the clock for transfer data and command.
 
-Required property for mt2701:
+Required property for mt2701 and mt2712:
 - mediatek,larb-id :the hardware id of this larb.
 
 Example:
diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
index 132e000..e9cb3ec 100644
--- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -16,6 +16,8 @@
    * "allwinner,sun9i-a80-mmc"
    * "allwinner,sun50i-a64-emmc"
    * "allwinner,sun50i-a64-mmc"
+   * "allwinner,sun50i-h6-emmc", "allwinner.sun50i-a64-emmc"
+   * "allwinner,sun50i-h6-mmc", "allwinner.sun50i-a64-mmc"
  - reg : mmc controller base registers
  - clocks : a list with 4 phandle + clock specifier pairs
  - clock-names : must contain "ahb", "mmc", "output" and "sample"
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index cfe7243..5bb3a18 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -19,8 +19,6 @@
 - reset-names: must be "stmmaceth"
 - phy-mode: See ethernet.txt
 - phy-handle: See ethernet.txt
-- #address-cells: shall be 1
-- #size-cells: shall be 0
 - syscon: A phandle to the device containing the EMAC or GMAC clock register
 
 Optional properties:
@@ -86,8 +84,6 @@
 	reset-names = "stmmaceth";
 	clocks = <&ccu CLK_BUS_EMAC>;
 	clock-names = "stmmaceth";
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	phy-handle = <&int_mii_phy>;
 	phy-mode = "mii";
@@ -137,8 +133,6 @@
 	reset-names = "stmmaceth";
 	clocks = <&ccu CLK_BUS_EMAC>;
 	clock-names = "stmmaceth";
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii";
@@ -191,8 +185,6 @@
 	reset-names = "stmmaceth";
 	clocks = <&ccu CLK_BUS_EMAC>;
 	clock-names = "stmmaceth";
-	#address-cells = <1>;
-	#size-cells = <0>;
 
 	phy-handle = <&ext_rgmii_phy>;
 	phy-mode = "rgmii";
diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
index 93b982e..feef39b 100644
--- a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
+++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
@@ -17,20 +17,18 @@
 
 	/* upstream device */
 
-	ssp0: ssp@41000000 {
+	ssp1: ssp@41000000 {
 		compatible = "mrvl,pxa3xx-ssp";
 		reg = <0x41000000 0x40>;
 		interrupts = <24>;
 		clock-names = "pxa27x-ssp.0";
-		dmas = <&dma 13
-			&dma 14>;
-		dma-names = "rx", "tx";
 	};
 
 	/* DAI as user */
 
 	ssp_dai0: ssp_dai@0 {
 		compatible = "mrvl,pxa-ssp-dai";
-		port = <&ssp0>;
+		port = <&ssp1>;
+		#sound-dai-cells = <0>;
 	};
 
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644
index 0000000..29bf91c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
@@ -0,0 +1,37 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values.
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+		   "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+		   "cmpint7" ("cmpintX" may be omitted if not present in the
+		   hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+	clocksource: timer@20000 {
+		compatible = "ti,da830-timer";
+		reg = <0x20000 0x1000>;
+		interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+			     <80>, <81>;
+		interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+				  "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+				  "cmpint6", "cmpint7";
+		clocks = <&pll0_auxclk>;
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 2f362054..2c3fc51 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -142,6 +142,7 @@
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 geniatech	Geniatech, Inc.
+giantec	Giantec Semiconductor, Inc.
 giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
 gmt	Global Mixed-mode Technology, Inc.
@@ -200,6 +201,7 @@
 kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie
+laird	Laird PLC
 lantiq	Lantiq Semiconductor
 lattice	Lattice Semiconductor
 lego	LEGO Systems A/S
@@ -279,6 +281,7 @@
 opencores	OpenCores.org
 openrisc	OpenRISC.io
 option	Option NV
+oranth	Shenzhen Oranth Technology Co., Ltd.
 ORCL	Oracle Corporation
 orisetech	Orise Technology
 ortustech	Ortus Technology Co., Ltd.
@@ -322,6 +325,7 @@
 roofull	Shenzhen Roofull Technology Co, Ltd
 samsung	Samsung Semiconductor
 samtec	Samtec/Softing company
+sancloud	Sancloud Ltd
 sandisk	Sandisk Corporation
 sbs	Smart Battery System
 schindler	Schindler
@@ -401,6 +405,7 @@
 urt	United Radiant Technology Corporation
 usi	Universal Scientific Industrial Co., Ltd.
 v3	V3 Semiconductor
+vamrs	Vamrs Ltd.
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
 virtio	Virtual I/O Device Specification, developed by the OASIS consortium
diff --git a/MAINTAINERS b/MAINTAINERS
index 126335e..8cd5c1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2014,6 +2014,7 @@
 F:	arch/arm/boot/dts/emev2*
 F:	arch/arm/boot/dts/r7s*
 F:	arch/arm/boot/dts/r8a*
+F:	arch/arm/boot/dts/r9a*
 F:	arch/arm/boot/dts/sh*
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
@@ -2132,6 +2133,15 @@
 S:	Maintained
 F:	drivers/memory/*emif*
 
+ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
+M:	Tero Kristo <t-kristo@ti.com>
+M:	Nishanth Menon <nm@ti.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	Documentation/devicetree/bindings/arm/ti/k3.txt
+F:	arch/arm64/boot/dts/ti/Makefile
+F:	arch/arm64/boot/dts/ti/k3-*
+
 ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
 M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 37a3de7..b5bd3de 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -38,6 +38,7 @@
 	at91-ariettag25.dtb \
 	at91-cosino_mega2560.dtb \
 	at91-kizboxmini.dtb \
+	at91-wb45n.dtb \
 	at91sam9g15ek.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
@@ -50,7 +51,10 @@
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
 	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
 	sama5d34ek.dtb \
@@ -73,6 +77,7 @@
 	bcm2835-rpi-b-rev2.dtb \
 	bcm2835-rpi-b-plus.dtb \
 	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
 	bcm2836-rpi-2-b.dtb \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
@@ -200,6 +205,7 @@
 	gemini-dlink-dns-313.dtb \
 	gemini-nas4220b.dtb \
 	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
 	gemini-wbd111.dtb \
 	gemini-wbd222.dtb
@@ -345,7 +351,8 @@
 	imx27-phytec-phycore-rdk.dtb \
 	imx27-phytec-phycard-s-rdk.dtb
 dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb
+	imx31-bug.dtb \
+	imx31-lite.dtb
 dtb-$(CONFIG_SOC_IMX35) += \
 	imx35-eukrea-mbimxsd35-baseboard.dtb \
 	imx35-pdk.dtb
@@ -358,10 +365,14 @@
 	imx51-digi-connectcore-jsk.dtb \
 	imx51-eukrea-mbimxsd51-baseboard.dtb \
 	imx51-ts4800.dtb \
-	imx51-zii-rdu1.dtb
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
 dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ard.dtb \
 	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
 	imx53-m53evk.dtb \
 	imx53-mba53.dtb \
 	imx53-ppd.dtb \
@@ -400,6 +411,7 @@
 	imx6dl-hummingboard2-emmc-som-v15.dtb \
 	imx6dl-hummingboard2-som-v15.dtb \
 	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
 	imx6dl-icore-rqs.dtb \
 	imx6dl-mamoj.dtb \
 	imx6dl-nit6xlite.dtb \
@@ -521,6 +533,8 @@
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
 	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
@@ -533,6 +547,7 @@
 	imx6sx-udoo-neo-full.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
@@ -567,8 +582,10 @@
 	vf610-cosmic.dtb \
 	vf610m4-cosmic.dtb \
 	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
 	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-ssmb-spu3.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-evk.dtb \
 	imx23-olinuxino.dtb \
@@ -695,10 +712,12 @@
 	am335x-pepper.dtb \
 	am335x-phycore-rdk.dtb \
 	am335x-pocketbeagle.dtb \
+	am335x-sancloud-bbe.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
 	am335x-sl50.dtb \
-	am335x-wega-rdk.dtb
+	am335x-wega-rdk.dtb \
+	am335x-osd3358-sm-red.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-droid4-xt894.dtb \
 	omap4-duovero-parlor.dtb \
@@ -819,6 +838,7 @@
 	r8a7793-gose.dtb \
 	r8a7794-alt.dtb \
 	r8a7794-silk.dtb \
+	r9a06g032-rzn1d400-db.dtb \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rv1108-evb.dtb \
@@ -859,6 +879,8 @@
 	s3c6410-smdk6410.dtb
 dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-aquila.dtb \
+	s5pv210-fascinate4g.dtb \
+	s5pv210-galaxys.dtb \
 	s5pv210-goni.dtb \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
@@ -1039,7 +1061,7 @@
 	tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-harmony.dtb \
-	tegra20-iris-512.dtb \
+	tegra20-colibri-iris.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
 	tegra20-plutux.dtb \
@@ -1109,6 +1131,7 @@
 	zynq-zc770-xm012.dtb \
 	zynq-zc770-xm013.dtb \
 	zynq-zed.dtb \
+	zynq-zturn.dtb \
 	zynq-zybo.dtb \
 	zynq-zybo-z7.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
@@ -1138,6 +1161,7 @@
 	armada-388-clearfog-pro.dtb \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
 	armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_39X) += \
 	armada-398-db.dtb
@@ -1168,7 +1192,6 @@
 	mt7623a-rfb-emmc.dtb \
 	mt7623a-rfb-nand.dtb \
 	mt7623n-rfb-emmc.dtb \
-	mt7623n-rfb-nand.dtb \
 	mt7623n-bananapi-bpi-r2.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index ed7a5a3..8c6fc41 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -396,7 +396,7 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 1356fd6..c87d012 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -778,7 +778,7 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 0c096a7..bf1a40e 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -690,7 +690,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
new file mode 100755
index 0000000..4d96901
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -0,0 +1,457 @@
+//SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+	model = "Octavo Systems OSD3358-SM-RED";
+	compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr0 */
+		>;
+	};
+
+	mcasp0_pins: mcasp0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+
+	flash_enable: flash-enable {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) 	/* rmii1_ref_clk.gpio0_29 */
+		>;
+	};
+
+	imu_interrupt: imu-interrupt {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) 		/* mii1_rx_er.gpio3_2 */
+		>;
+	};
+
+	ethernet_interrupt: ethernet-interrupt{
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) 		/* mii1_col.gpio3_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 * AM335x errata for wiring:
+	 * http://www.ti.com/lit/er/sprz360i/sprz360i.pdf
+	 */
+
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: hdmi-encoder@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		port {
+			hdmi_0: endpoint {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
+	};
+
+	mpu9250: imu@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ax8975@c {
+				compatible = "ak,ak8975";
+				reg = <0x0c>;
+			};
+		};
+		/*invensense,int_config = <0x10>;
+		invensense,level_shifter = <0>;
+		invensense,orientation = [01 00 00 00 01 00 00 00 01];
+		invensense,sec_slave_type = <0>;
+		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
+	};
+
+	bmp280: pressure@78 {
+		compatible = "bosch,bmp280";
+		reg = <0x76>;
+	};
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk-mcasp0-fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk-mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	user_leds_s0: user-leds-s0 {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	uart0_pins: pinmux-uart0-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux-clkout2-pin {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw-default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)		/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)		/* mii1_rxclk.rgmii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)		/* mii1_rxd3.rgmii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)		/* mii1_rxd2.rgmii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)		/* mii1_rxd1.rgmii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)		/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw-sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci-mdio-default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci-mdio-sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux-mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
+		>;
+	};
+
+	emmc_pins: pinmux-emmc-pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <4>;
+	phy-mode = "rgmii-txid";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
new file mode 100644
index 0000000..7b8e741
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced";
+	compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	usb_hub_ctrl: usb_hub_ctrl {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
+		>;
+	};
+
+	mpu6050_pins: pinmux_mpu6050_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
+		>;
+	};
+
+	lps3331ap_pins: pinmux_lps3331ap_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7)     /* gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii-txid";
+};
+
+&i2c0 {
+	lps331ap: barometer@5c {
+		compatible = "st,lps331ap-press";
+		st,drdy-int-pin = <1>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	mpu6050: accelerometer@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
+	};
+
+	usb2512b: usb-hub@2c {
+		compatible = "microchip,usb2512b";
+		reg = <0x2c>;
+		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		/* wifi on port 4 */
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 1bcc604..38d57b8 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -8,6 +8,8 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Toby Churchill SL50 Series";
@@ -34,25 +36,25 @@
 		pinctrl-0 = <&led_pins>;
 
 		led0 {
-			label = "sl50:green:usr0";
+			label = "sl50:red:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led1 {
-			label = "sl50:red:usr1";
+			label = "sl50:green:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led2 {
-			label = "sl50:green:usr2";
+			label = "sl50:red:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led3 {
-			label = "sl50:red:usr3";
+			label = "sl50:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
@@ -60,16 +62,44 @@
 
 	backlight0: disp0 {
 		compatible = "pwm-backlight";
-		pwms = <&ehrpwm1 0 500000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight0_pins>;
+		pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_sys_reg>;
 	};
 
 	backlight1: disp1 {
 		compatible = "pwm-backlight";
-		pwms = <&ehrpwm1 1 500000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight1_pins>;
+		pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_sys_reg>;
 	};
 
 	clocks {
@@ -78,27 +108,85 @@
 		#size-cells = <0>;
 
 		/* audio external oscillator */
-		tlv320aic3x_mclk: oscillator@0 {
+		audio_mclk_fixed: oscillator@0 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency  = <24576000>;	/* 24.576MHz */
 		};
+
+		audio_mclk: audio_mclk_gate@0 {
+			compatible = "gpio-gate-clock";
+			#clock-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk_pins>;
+			clocks = <&audio_mclk_fixed>;
+			enable-gpios = <&gpio1 27 0>;
+		};
+	};
+
+	panel: lcd_panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		panel-info {
+			ac-bias = <255>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <0x80>;
+			tft-alt-mode = <0>;
+			mono-8bit-mode = <0>;
+			sync-edge = <0>;
+			sync-ctrl = <1>;
+			raster-order = <0>;
+			fifo-th = <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 960x128 {
+				clock-frequency = <18000000>;
+				hactive = <960>;
+				vactive = <272>;
+
+				hback-porch = <40>;
+				hfront-porch = <16>;
+				hsync-len = <24>;
+				hsync-active = <0>;
+
+				vback-porch = <3>;
+				vfront-porch = <8>;
+				vsync-len = <4>;
+				vsync-active = <0>;
+			};
+		};
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-SL50";
-		ti,audio-codec = <&audio_codec>;
-		ti,mcasp-controller = <&mcasp0>;
+		compatible = "audio-graph-card";
+		label = "sound-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_pa_pins>;
 
-		clocks = <&tlv320aic3x_mclk>;
-		clock-names = "mclk";
+		widgets = "Headphone", "Headphone Jack",
+			  "Speaker", "Speaker External",
+			  "Line", "Line In",
+			  "Microphone", "Microphone Jack";
 
-		ti,audio-routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1R",               "Line In",
-			"LINE1L",		"Line In";
+		routing = "Headphone Jack",	"HPLOUT",
+			  "Headphone Jack",	"HPROUT",
+			  "Amplifier",		"MONO_LOUT",
+			  "Speaker External",	"Amplifier",
+			  "LINE1R",		"Line In",
+			  "LINE1L",		"Line In",
+			  "MIC3L",		"Microphone Jack",
+			  "MIC3R",		"Microphone Jack",
+			  "Microphone Jack",	"Mic Bias";
+
+		dais = <&cpu_port>;
+
+		pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
 	};
 
 	emmc_pwrseq: pwrseq@0 {
@@ -108,6 +196,14 @@
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	};
 
+	vdd_sys_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sys_reg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
 	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -120,6 +216,65 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&lwb_pins>;
 
+	audio_pins: pinmux_audio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
+		>;
+	};
+
+	audio_pa_pins: pinmux_audio_pa_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* SoundPA_en - mcasp0_aclkr.gpio3_18 */
+		>;
+	};
+
+	audio_mclk_pins: pinmux_audio_mclk_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	backlight0_pins: pinmux_backlight0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)	/* gpmc_wen.gpio2_4 */
+		>;
+	};
+
+	backlight1_pins: pinmux_backlight1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+		>;
+	};
+
 	led_pins: pinmux_led_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
@@ -207,6 +362,8 @@
 			/* MDIO */
 			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
 			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			/* Ethernet */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* Ethernet_nRST - gpmc_ad14.gpio1_14 */
 		>;
 	};
 
@@ -245,16 +402,6 @@
 		>;
 	};
 
-	audio_pins: pinmux_audio_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2 */
-		>;
-	};
-
 	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
@@ -262,6 +409,12 @@
 		>;
 	};
 
+	rtc0_irq_pins: pinmux_rtc0_irq_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
+		>;
+	};
+
 	spi0_pins: pinmux_spi0_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0)	/* SPI0_MOSI - spi0_d0.spi0_d0 */
@@ -274,15 +427,18 @@
 
 	lwb_pins: pinmux_lwb_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)	/* SoundPA_en - mcasp0_fsr.gpio3_19 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)	/* nKbdOnC - gpmc_ad10.gpio0_26 */
 			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
 			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
 			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
 			/* PDI Bus - Battery system */
 			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
 			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
+			/* FPGA */
+			AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7)	/* FPGA_DONE - gpmc_ad8.gpio0_22 */
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* FPGA_NRST - gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* FPGA_RUN - gpmc_a1.gpio1_17 */
+			AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7)	/* ENFPGA - gpmc_a9.gpio1_25 */
+			AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
 		>;
 	};
 };
@@ -298,9 +454,14 @@
 		reg = <0x24>;
 	};
 
-	bq32000: rtc@68 {
-		compatible = "ti,bq32000";
-		trickle-resistor-ohms = <1120>;
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc0_irq_pins>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
+		wakeup-source;
+		trickle-resistor-ohms = <2000>;
 		reg = <0x68>;
 	};
 
@@ -326,12 +487,21 @@
 	audio_codec: tlv320aic3106@1b {
 		status = "okay";
 		compatible = "ti,tlv320aic3106";
+		#sound-dai-cells = <0>;
 		reg = <0x1b>;
+		ai3x-micbias-vg = <2>;  /* 2.5V */
 
 		AVDD-supply = <&ldo4_reg>;
 		IOVDD-supply = <&ldo4_reg>;
 		DRVDD-supply = <&ldo4_reg>;
 		DVDD-supply = <&ldo3_reg>;
+
+		codec_port: port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint>;
+				clocks = <&audio_mclk>;
+			};
+		};
 	};
 
 	/* Ambient Light Sensor */
@@ -363,7 +533,7 @@
 
 &usb0 {
 	status = "okay";
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 };
 
 &usb1 {
@@ -397,17 +567,27 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&audio_pins>;
-
+	#sound-dai-cells = <0>;
 	op-mode = <0>;  /* MCASP_ISS_MODE */
 	tdm-slots = <2>;
-	serial-dir = <
-		2 0 1 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
 	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+
+	cpu_port: port {
+		cpu_endpoint: endpoint {
+			remote-endpoint = <&codec_endpoint>;
+
+			dai-format = "dsp_b";
+			bitclock-master = <&codec_port>;
+			frame-master = <&codec_port>;
+			bitclock-inversion;
+			clocks = <&audio_mclk>;
+		};
+	};
 };
 
 &uart0 {
@@ -507,13 +687,8 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
+	phy-handle = <&ethphy0>;
 };
 
 &mac {
@@ -528,6 +703,12 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <100>;   /* PHY datasheet states 100us min */
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &sham {
@@ -547,3 +728,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ehrpwm1_pins>;
 };
+
+&lcdc {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&am335x_adc {
+	ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 9cd62bc2..d3dd6a1 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -29,8 +29,8 @@
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
-		d_can0 = &dcan0;
-		d_can1 = &dcan1;
+		d-can0 = &dcan0;
+		d-can1 = &dcan1;
 		usb0 = &usb0;
 		usb1 = &usb1;
 		phy0 = &usb0_phy;
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 98aadb0..1d158cf 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -127,6 +127,7 @@
 		status = "okay";
 		pinctrl-names = "default";
 		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
+		vcc-supply = <&vdd_io_reg>;
 
 		port {
 			lcd_in: endpoint {
@@ -154,6 +155,7 @@
 	bl: backlight {
 		compatible = "pwm-backlight";
 		pinctrl-names = "default";
+		power-supply = <&vdd_io_reg>;
 		pinctrl-0 = <&backlight_pins>;
 		pwms = <&pwm11 0 5000000 0>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
@@ -168,6 +170,13 @@
 		ti,timers = <&timer11>;
 		#pwm-cells = <3>;
 	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+		#phy-cells = <0>;
+	};
 };
 
 &davinci_emac {
@@ -203,6 +212,7 @@
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
 	};
 };
 
@@ -220,15 +230,21 @@
 	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
 };
 
-&mmc2 {
-      status = "disabled";
-};
-
 &mmc3 {
       status = "disabled";
 };
 
+&usbhshost {
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
 &omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_rst_pins>;
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
@@ -287,4 +303,32 @@
 			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
 		>;
 	};
+
+	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
+			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index a6d5ff7..dae6e45 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -14,6 +14,32 @@
 			cpu0-supply = <&vdd_core_reg>;
 		};
 	};
+
+	wl12xx_buffer: wl12xx_buf {
+		compatible = "regulator-fixed";
+		regulator-name = "wl1271_buf";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_buffer_pins>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+		regulator-always-on;
+		vin-supply = <&vdd_1v8_reg>;
+	};
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_wkup_pins>;
+		gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&wl12xx_buffer>;
+	};
 };
 
 &gpmc {
@@ -64,7 +90,6 @@
 		regulators {
 			vdd_core_reg: VDCDC1 {
 				regulator-name = "vdd_core";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
@@ -72,7 +97,6 @@
 
 			vdd_io_reg: VDCDC2 {
 				regulator-name = "vdd_io";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -80,7 +104,6 @@
 
 			vdd_1v8_reg: VDCDC3 {
 				regulator-name = "vdd_1v8";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -88,7 +111,6 @@
 
 			vdd_usb18_reg: LDO1 {
 				regulator-name = "vdd_usb18";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -96,7 +118,6 @@
 
 			vdd_usb33_reg: LDO2 {
 				regulator-name = "vdd_usb33";
-				compatible = "regulator-fixed";
 				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -126,8 +147,63 @@
 	};
 };
 
+&mmc2 {
+	interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+		max-speed = <3000000>;
+	};
+};
+
 &omap3_pmx_core {
 
+	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
 	rtc_pins: pinmux_rtc_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
@@ -139,4 +215,23 @@
 			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
 		>;
 	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)		/* gpio_56 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 60414b1..5b97c20 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -790,7 +790,7 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 5bb9d68..d9a2049 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -66,10 +66,6 @@
 	};
 };
 
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &extcon_usb2 {
 	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
 	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index c6d858b..784639d 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -57,10 +57,6 @@
 	};
 };
 
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &extcon_usb2 {
 	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
 	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index ad87f1a..c9063ff 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -395,8 +395,13 @@
 	dr_mode = "host";
 };
 
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
 &usb2 {
-	dr_mode = "peripheral";
+	extcon = <&extcon_usb2>;
+	dr_mode = "otg";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
index 50ed4ae..53b4bd3 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -3,11 +3,6 @@
  * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
index 24e4b5a..ff890c0 100644
--- a/arch/arm/boot/dts/armada-388-clearfog-pro.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
@@ -3,11 +3,6 @@
  * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 #include "armada-388-clearfog.dts"
 
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
index 5fd0f6f..89a354b 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dts
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -3,11 +3,6 @@
  * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 
 /dts-v1/;
@@ -235,7 +230,7 @@
 &spi1 {
 	/*
 	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32 (not populated on uSOM)
+	 * CS0: W25Q32
 	 * CS1:
 	 * CS2: mikrobus
 	 */
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 0d9dfdf..7c6ad2a 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -3,11 +3,6 @@
  * Device Tree include file for SolidRun Clearfog 88F6828 based boards
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 
 #include "armada-388.dtsi"
@@ -230,7 +225,7 @@
 &spi1 {
 	/*
 	 * Add SPI CS pins for clearfog:
-	 * CS0: W25Q32 (not populated on uSOM)
+	 * CS0: W25Q32
 	 * CS1: PIC microcontroller (Pro models)
 	 * CS2: mikrobus
 	 */
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
new file mode 100644
index 0000000..705adfa
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Helios4
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
+ *
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "Helios4";
+	compatible = "kobol,helios4", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_brick_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_hdd: regulator-5v-hdd {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HDD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_usb: regulator-5v-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB-PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_12v>;
+	};
+
+	system-leds {
+		compatible = "gpio-leds";
+		status-led {
+			label = "helios4:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		fault-led {
+			label = "helios4:red:fault";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	io-leds {
+		compatible = "gpio-leds";
+		sata1-led {
+			label = "helios4:green:ata1";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+			default-state = "off";
+		};
+		sata2-led {
+			label = "helios4:green:ata2";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+			default-state = "off";
+		};
+		sata3-led {
+			label = "helios4:green:ata3";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata3";
+			default-state = "off";
+		};
+		sata4-led {
+			label = "helios4:green:ata4";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata4";
+			default-state = "off";
+		};
+		usb-led {
+			label = "helios4:green:usb";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+	fan1: j10-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+	};
+
+	fan2: j17-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+	};
+
+	usb2_phy: usb2-phy {
+		compatible = "usb-nop-xceiv";
+		vbus-regulator = <&reg_5p0v_usb>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		internal-regs {
+			i2c@11000 {
+				clock-frequency = <400000>;
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-Board Revision bit 0 #
+				 *  1-Board Revision bit 1 #
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+
+					board_rev_bit_0 {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-0";
+					};
+					board_rev_bit_1 {
+						gpio-hog;
+						gpios = <1 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-1";
+					};
+					usb3_ilimit {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "usb-overcurrent-status";
+					};
+				};
+
+				temp_sensor: temp@4c {
+					compatible = "ti,lm75";
+					reg = <0x4c>;
+					vcc-supply = <&reg_3p3v>;
+				};
+			};
+
+			i2c@11100 {
+				/*
+				 * External I2C Bus for user peripheral
+				 */
+				clock-frequency = <400000>;
+				pinctrl-0 = <&helios_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@e0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			spi@10680 {
+				pinctrl-0 = <&spi1_pins
+					     &microsom_spi1_cs_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&helios_sdhci_pins
+					     &helios_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				usb-phy = <&usb2_phy>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				pca0_pins: pca0-pins {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+				microsom_phy0_int_pins: microsom-phy0-int-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+				helios_i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				helios_led_pins: helios-led-pins {
+					marvell,pins = "mpp24", "mpp25",
+						       "mpp49", "mpp50",
+						       "mpp52", "mpp53",
+						       "mpp54";
+					marvell,function = "gpio";
+				};
+				helios_fan_pins: helios-fan-pins {
+					marvell,pins = "mpp41", "mpp43",
+						       "mpp48", "mpp55";
+					marvell,function = "gpio";
+				};
+				microsom_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 2d1cea1..3a7f9c1 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -3,11 +3,6 @@
  * Device Tree file for SolidRun Armada 38x Microsom
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -99,7 +94,6 @@
 		compatible = "w25q32", "jedec,spi-nor";
 		reg = <0>; /* Chip select 0 */
 		spi-max-frequency = <3000000>;
-		status = "disabled";
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index ede11c5..2375449 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -80,20 +80,20 @@
 	};
 };
 
-&ehci0 {
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb2ah_default>;
 };
 
 &ehci1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb2bh_default>;
 };
 
 &uhci {
 	status = "okay";
-
-	/* No pinctrl, this follows the above EHCI settings */
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 0b9b37d..7d28c03 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -21,9 +21,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		vga_memory: framebuffer@bf000000 {
+		vga_memory: framebuffer@9f000000 {
 			no-map;
-			reg = <0xbf000000 0x01000000>; /* 16M */
+			reg = <0x9f000000 0x01000000>; /* 16M */
 		};
 
 		flash_memory: region@98000000 {
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 75df157..b23a983 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -92,6 +92,12 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+			valid-sources = <0x7fffffff>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
 		mac0: ethernet@1e660000 {
 			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
 			reg = <0x1e660000 0x180>;
@@ -113,6 +119,8 @@
 			reg = <0x1e6a1000 0x100>;
 			interrupts = <5>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2h_default>;
 			status = "disabled";
 		};
 
@@ -123,6 +131,20 @@
 			#ports = <3>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
 			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2400-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2d_default>;
+			status = "disabled";
 		};
 
 		apb {
@@ -161,7 +183,7 @@
 				status = "disabled";
 			};
 
-			sram@1e720000 {
+			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x8000>;	// 32K
 			};
@@ -224,7 +246,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1e786000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_APB>;
+				clocks = <&syscon ASPEED_CLK_24M>;
 				resets = <&syscon ASPEED_RESET_PWM>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 17f2714..87fdc14 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -127,6 +127,13 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+			valid-sources = <0xffffffff>;
+			copro-sw-interrupts = <1>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
 		mac0: ethernet@1e660000 {
 			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
 			reg = <0x1e660000 0x180>;
@@ -148,6 +155,8 @@
 			reg = <0x1e6a1000 0x100>;
 			interrupts = <5>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
 			status = "disabled";
 		};
 
@@ -156,6 +165,8 @@
 			reg = <0x1e6a3000 0x100>;
 			interrupts = <13>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
 			status = "disabled";
 		};
 
@@ -166,6 +177,20 @@
 			#ports = <2>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
 			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2500-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
 		};
 
 		apb {
@@ -211,7 +236,7 @@
 				status = "disabled";
 			};
 
-			sram@1e720000 {
+			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x9000>;	// 36K
 			};
@@ -281,7 +306,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1e786000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_APB>;
+				clocks = <&syscon ASPEED_CLK_24M>;
 				resets = <&syscon ASPEED_RESET_PWM>;
 				status = "disabled";
 			};
@@ -1417,6 +1442,11 @@
 		groups = "USB2AH";
 	};
 
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USB2AD";
+	};
+
 	pinctrl_usb11bhid_default: usb11bhid_default {
 		function = "USB11BHID";
 		groups = "USB11BHID";
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts
new file mode 100644
index 0000000..ededd5b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
new file mode 100644
index 0000000..bb86f17
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	spi-flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pck2>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@87 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <87>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 0000000..4b9176d
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@56 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <56>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
new file mode 100644
index 0000000..5a81cab
--- /dev/null
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
new file mode 100644
index 0000000..241682a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-som60.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
new file mode 100644
index 0000000..5b9512a6
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		irqbtn@18 {
+			reg = <18>;
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup = <1>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi
new file mode 100644
index 0000000..ebe61a2
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
new file mode 100644
index 0000000..8cecc70
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		btn0@10 {
+			reg = <10>;
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup = <1>;
+		};
+
+		irqbtn@31 {
+			reg = <31>;
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
new file mode 100644
index 0000000..85692c8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&slow_osc {
+	atmel,osc-bypass;
+};
+
+&usart1_clk {
+	atmel,clk-output-range = <0 132000000>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index 53c63d0..33f09d5 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -590,7 +590,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc", "syscon";
+				compatible = "atmel,at91sam9261-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 87fb066..af68a86 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -93,7 +93,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc", "syscon";
+				compatible = "atmel,at91sam9263-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index bd001cc..8fb2203 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -832,7 +832,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc", "syscon";
+				compatible = "atmel,at91sam9rl-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a3c3c31..11c0ef1 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -389,13 +389,13 @@
 				};
 			};
 
-			rstc@fffffe00 {
+			reset_controller: rstc@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shdwc@fffffe10 {
+			shutdown_controller: shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -470,7 +470,7 @@
 				clock-names = "dma_clk";
 			};
 
-			pinctrl@fffff400 {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
@@ -1206,7 +1206,7 @@
 				};
 			};
 
-			watchdog@fffffe40 {
+			watchdog: watchdog@fffffe40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2c4df2d..253df71 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -41,6 +41,10 @@
 	model = "Broadcom Cygnus SoC";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		ethernet0 = &eth0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -417,6 +421,11 @@
 			status = "disabled";
 		};
 
+		rng: rng@18032000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x18032000 0x28>;
+		};
+
 		sdhci0: sdhci@18041000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x18041000 0x100>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
new file mode 100644
index 0000000..4764a25
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835-rpi-cm1.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module IO board rev1";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "HDMI_HPD_N",
+			  /* Also used as ACT LED */
+			  "EMMC_EN_N",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
new file mode 100644
index 0000000..ef22c2d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+	leds {
+		act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&sdhost {
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 7704bb0..beb6c50 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -17,6 +17,12 @@
 		};
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&local_intc>;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 61315cf..31b2964 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -66,6 +66,12 @@
 			clock-frequency = <1000000>;
 		};
 
+		txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
 		dma: dma@7e007000 {
 			compatible = "brcm,bcm2835-dma";
 			reg = <0x7e007000 0xf00>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index ff2e551..79d454f 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -90,3 +90,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3bcc037..99365bb 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -80,3 +80,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index a587384..bc330b1 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -146,3 +146,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
index 6c8f0ad..258d2b2 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -38,3 +38,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index ebda45f..e7fdaed 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -57,3 +57,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 9dd0e22..42bafc6 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -64,3 +64,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index d7c34fa..dce35eb 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -91,3 +91,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 2642494..b7a024b 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -83,3 +83,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index e7b09b7..f7f834c 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -158,3 +158,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 16314fc..76a2bab 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -74,3 +74,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 328aa90..69e3570 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -118,3 +118,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 8ea46ee..0f6f0fe 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -104,3 +104,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index 5eeac73..f770897 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -57,3 +57,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index da4d9ec..4d42786 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -105,3 +105,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index c94c732..5f663f8 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -99,3 +99,7 @@
 &usb2 {
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index 2227181..2033411 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -62,3 +62,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 79a9633..77d1687 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -127,3 +127,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
index db744a5..983149b 100644
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -39,3 +39,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index 9e267d3..ca41481 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -101,3 +101,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index d266131..aa69e65 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -182,3 +182,7 @@
 &usb3 {
 	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
index f5bf658..c7143a9 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -104,3 +104,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index d173bcd..03c1ab1 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -115,3 +115,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index f47afe3..36efe41 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -31,5 +31,238 @@
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
+
+		rfkill {
+				label = "WiFi";
+				linux,code = <KEY_RFKILL>;
+				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		reset {
+				label = "Reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "bcm53xx:green:usb2";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		power {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		wifi-disabled {
+			label = "bcm53xx:amber:wifi-disabled";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi-enabled {
+			label = "bcm53xx:white:wifi-enabled";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar1 {
+			label = "bcm53xx:white:bluebar1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar2 {
+			label = "bcm53xx:white:bluebar2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar3 {
+			label = "bcm53xx:white:bluebar3";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		bluebar4 {
+			label = "bcm53xx:white:bluebar4";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar5 {
+			label = "bcm53xx:white:bluebar5";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar6 {
+			label = "bcm53xx:white:bluebar6";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar7 {
+			label = "bcm53xx:white:bluebar7";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		bluebar8 {
+			label = "bcm53xx:white:bluebar8";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mdio-bus-mux {
+		/* BIT(9) = 1 => external mdio */
+		mdio_ext: mdio@200 {
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mdio-mii-mux {
+		compatible = "mdio-mux-mmioreg";
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x1800c1c0 0x4>;
+
+		/* BIT(6) = mdc, BIT(7) = mdio */
+		mux-mask = <0xc0>;
+
+		mdio-mii@0 {
+			/* Enable MII function */
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch@0  {
+				compatible = "brcm,bcm53125";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+				reset-names = "robo_reset";
+				reg = <0>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan1";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan6";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+					};
+
+					sw1_p8: port@8 {
+						reg = <8>;
+						ethernet = <&sw0_p0>;
+						label = "cpu";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+			label = "lan7";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan4";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan8";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			ethernet = <&gmac2>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sw0_p0: port@0 {
+			reg = <0>;
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index a5cef51..3e5e997 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -60,3 +60,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index 7496aab..7acbecd 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -60,3 +60,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 53aaa52..f4558d9 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -100,3 +100,7 @@
 &spi_nor {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index 0e718ed..3071938 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -91,3 +91,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index 4840a78..f7c3e27 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -7,9 +7,10 @@
 #include "bcm4708.dtsi"
 
 / {
-	usb3_phy: usb3-phy {
-		compatible = "brcm,ns-bx-usb3-phy";
-	};
+};
+
+&usb3_phy {
+	compatible = "brcm,ns-bx-usb3-phy";
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ef995e5..bc607d1 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -154,13 +154,6 @@
 		clock-names = "phy-ref-clk";
 	};
 
-	usb3_phy: usb3-phy {
-		compatible = "brcm,ns-ax-usb3-phy";
-		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
-		reg-names = "dmp", "ccb-mii";
-		#phy-cells = <0>;
-	};
-
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;
@@ -359,7 +352,33 @@
 		reg = <0x18003000 0x8>;
 		#size-cells = <1>;
 		#address-cells = <0>;
-		status = "disabled";
+	};
+
+	mdio-bus-mux {
+		compatible = "mdio-mux-mmioreg";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
 	};
 
 	i2c0: i2c@18009000 {
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index 16007d7..453a2a3 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -48,6 +48,14 @@
 		};
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
index 2e08c89..934f07a 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -42,3 +42,7 @@
 		reg = <0x00000000 0x08000000>;
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
index c37616c..31e4dd0 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -42,3 +42,7 @@
 		reg = <0x00000000 0x08000000>;
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 40e694b..17f63c7 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -90,3 +90,7 @@
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
index 3076e81..11b0f5e 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -95,3 +95,7 @@
 		reg = <0x00700000 0x00900000>;
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 79c168e..e798055 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -113,3 +113,7 @@
 &uart1 {
 	status = "okay";
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index db67377..d2f7d98 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -50,6 +50,16 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <1>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 516a7ce..99d6872 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -45,6 +45,17 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <1>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu2: cpu@2 {
@@ -52,6 +63,17 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <2>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu3: cpu@3 {
@@ -59,6 +81,17 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <3>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 14dff3e..0102ffc 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -35,6 +35,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &edma0 {
 	ti,edma-reserved-slot-ranges = <32 50>;
 };
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 0e82bb9..f9b7579 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -27,6 +27,65 @@
 		spi0 = &spi1;
 	};
 
+	backlight: backlight-pwm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+		power-supply = <&backlight_lcd>;
+		compatible = "pwm-backlight";
+		/*
+		 * The PWM here corresponds to production hardware. The
+		 * schematic needs to be 1015171 (15 March 2010), Rev A
+		 * or newer.
+		 */
+		pwms = <&ecap2 0 50000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <7>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		/*
+		 * The vpif and the LCD are mutually exclusive.
+		 * To enable VPIF, change the status below to 'disabled' then
+		 * then change the status of the vpif below to 'okay'
+		 */
+		status = "okay";
+		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+		panel-info {
+			ac-bias		= <255>;
+			ac-bias-intrpt	= <0>;
+			dma-burst-sz	= <16>;
+			bpp		= <16>;
+			fdd		= <0x80>;
+			sync-edge	= <0>;
+			sync-ctrl	= <1>;
+			raster-order	= <0>;
+			fifo-th		= <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 480x272 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <3>;
+				hback-porch = <2>;
+				hsync-len = <42>;
+				vback-porch = <3>;
+				vfront-porch = <4>;
+				vsync-len = <11>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+
 	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
@@ -35,6 +94,15 @@
 		regulator-boot-on;
 	};
 
+	backlight_lcd: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_backlight_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+		enable-active-high;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "DA850/OMAP-L138 EVM";
@@ -63,6 +131,14 @@
 	};
 };
 
+&ecap2 {
+	status = "okay";
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -93,6 +169,10 @@
 	};
 };
 
+&sata {
+	status = "okay";
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -109,6 +189,10 @@
 	status = "okay";
 };
 
+&lcdc {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
@@ -336,5 +420,10 @@
 &vpif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
-	status = "okay";
+	/*
+	 * The vpif and the LCD are mutually exclusive.
+	 * To enable VPIF, disable the ti,tilcdc,panel then
+	 * change the status below to 'okay'
+	 */
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 0edf769..0177e3e 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -123,6 +123,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -175,6 +179,11 @@
 	status = "okay";
 };
 
+&sata_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index ee39324..c4729d0 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -173,6 +173,15 @@
 		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
 	};
 
+	bt_slow_clk: bt-clock {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&ecap2 0 30518 0>;
+	};
+
 	/* ARM local RAM */
 	memory@ffff0000 {
 		compatible = "syscon", "simple-mfd";
@@ -191,6 +200,10 @@
 	};
 };
 
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
 &pmx_core {
 	status = "okay";
 
@@ -212,6 +225,20 @@
 			bias-disable;
 		};
 	};
+
+	bt_clock_bias: bt-clock-bias-groups {
+		disable {
+			groups = "cp2";
+			bias-disable;
+		};
+	};
+
+	bt_pic_bias: bt-pic-bias-groups {
+		disable {
+			groups = "cp20";
+			bias-disable;
+		};
+	};
 };
 
 /* Input port 1 */
@@ -221,6 +248,22 @@
 	pinctrl-0 = <&serial1_rxtx_pins>;
 };
 
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,cc2560";
+		clocks = <&bt_slow_clk>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		nvmem-cells = <&bdaddr>;
+		nvmem-cell-names = "bd-address";
+	};
+};
+
 &rtc0 {
 	status = "okay";
 };
@@ -239,6 +282,12 @@
 		pagesize = <64>;
 		read-only;
 		reg = <0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bdaddr: bdaddr@3f06 {
+			reg = <0x3f06 0x06>;
+		};
 	};
 };
 
@@ -323,6 +372,10 @@
 	};
 };
 
+&ecap2 {
+	status = "okay";
+};
+
 &ehrpwm0 {
 	status = "okay";
 };
@@ -336,6 +389,39 @@
 		gpios = <6 GPIO_ACTIVE_HIGH>;
 		output-high;
 	};
+
+	/* Don't impede Bluetooth clock signal */
+	bt_clock_en {
+		gpio-hog;
+		gpios = <5 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+
+	/*
+	 * There is a PIC microcontroller for interfacing with an Apple MFi
+	 * chip. This interferes with normal Bluetooth operation, so we need
+	 * to make sure it is turned off. Note: The publicly available
+	 * schematics from LEGO don't show that these pins are connected to
+	 * anything, but they are present in the source code from LEGO.
+	 */
+
+	bt_pic_en {
+		gpio-hog;
+		gpios = <51 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	bt_pic_rst {
+		gpio-hog;
+		gpios = <78 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	bt_pic_cts {
+		gpio-hog;
+		gpios = <87 GPIO_ACTIVE_HIGH>;
+		input;
+	};
 };
 
 &usb_phy {
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 0f4f817..47aa53b 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -32,6 +32,25 @@
 			reg = <0xfffee000 0x2000>;
 		};
 	};
+	clocks: clocks {
+		ref_clk: ref_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "ref_clk";
+		};
+		sata_refclk: sata_refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sata_refclk";
+			status = "disabled";
+		};
+		usb_refclkin: usb_refclkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_refclkin";
+			status = "disabled";
+		};
+	};
 	dsp: dsp@11800000 {
 		compatible = "ti,da850-dsp";
 		reg = <0x11800000 0x40000>,
@@ -42,6 +61,8 @@
 		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
 		interrupt-parent = <&intc>;
 		interrupts = <28>;
+		clocks = <&psc0 15>;
+		resets = <&psc0 15>;
 		status = "disabled";
 	};
 	soc@1c00000 {
@@ -52,6 +73,38 @@
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
+		psc0: clock-controller@10000 {
+			compatible = "ti,da850-psc0";
+			reg = <0x10000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+				 <&async1_clk>;
+			clock-names = "pll0_sysclk1", "pll0_sysclk2",
+				      "pll0_sysclk4", "pll0_sysclk6",
+				      "async1";
+		};
+		pll0: clock-controller@11000 {
+			compatible = "ti,da850-pll0";
+			reg = <0x11000 0x1000>;
+			clocks = <&ref_clk>, <&pll1_sysclk 3>;
+			clock-names = "clksrc", "extclksrc";
+
+			pll0_pllout: pllout {
+				#clock-cells = <0>;
+			};
+			pll0_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll0_auxclk: auxclk {
+				#clock-cells = <0>;
+			};
+			pll0_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
 		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
@@ -281,8 +334,41 @@
 			usb_phy: usb-phy {
 				compatible = "ti,da830-usb-phy";
 				#phy-cells = <1>;
+				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+				clock-names = "usb0_clk48", "usb1_clk48";
 				status = "disabled";
 			};
+			usb_phy_clk: usb-phy-clocks {
+				compatible = "ti,da830-usb-phy-clocks";
+				#clock-cells = <1>;
+				clocks = <&psc1 1>, <&usb_refclkin>,
+					 <&pll0_auxclk>;
+				clock-names = "fck", "usb_refclkin", "auxclk";
+			};
+			ehrpwm_tbclk: ehrpwm_tbclk {
+				compatible = "ti,da830-tbclksync";
+				#clock-cells = <0>;
+				clocks = <&psc1 17>;
+				clock-names = "fck";
+			};
+			div4p5_clk: div4.5 {
+				compatible = "ti,da830-div4p5ena";
+				#clock-cells = <0>;
+				clocks = <&pll0_pllout>;
+				clock-names = "pll0_pllout";
+			};
+			async1_clk: async1 {
+				compatible = "ti,da850-async1-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+				clock-names = "pll0_sysclk3", "div4.5";
+			};
+			async3_clk: async3 {
+				compatible = "ti,da850-async3-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+				clock-names = "pll0_sysclk2", "pll1_sysclk2";
+			};
 		};
 		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
@@ -294,18 +380,21 @@
 			#dma-cells = <2>;
 
 			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+			power-domains = <&psc0 0>;
 		};
 		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 1>;
 		};
 		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 2>;
 		};
 		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
@@ -317,12 +406,14 @@
 			#dma-cells = <2>;
 
 			ti,tptcs = <&edma1_tptc0 7>;
+			power-domains = <&psc1 0>;
 		};
 		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc1 21>;
 		};
 		serial0: serial@42000 {
 			compatible = "ti,da830-uart", "ns16550a";
@@ -330,6 +421,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <25>;
+			clocks = <&psc0 9>;
+			power-domains = <&psc0 9>;
 			status = "disabled";
 		};
 		serial1: serial@10c000 {
@@ -338,6 +431,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <53>;
+			clocks = <&psc1 12>;
+			power-domains = <&psc1 12>;
 			status = "disabled";
 		};
 		serial2: serial@10d000 {
@@ -346,6 +441,8 @@
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <61>;
+			clocks = <&psc1 13>;
+			power-domains = <&psc1 13>;
 			status = "disabled";
 		};
 		rtc0: rtc@23000 {
@@ -353,6 +450,8 @@
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
+			clocks = <&pll0_auxclk>;
+			clock-names = "int-clk";
 			status = "disabled";
 		};
 		i2c0: i2c@22000 {
@@ -361,6 +460,7 @@
 			interrupts = <15>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
 		i2c1: i2c@228000 {
@@ -369,11 +469,21 @@
 			interrupts = <51>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&psc1 11>;
+			power-domains = <&psc1 11>;
 			status = "disabled";
 		};
+		clocksource: timer@20000 {
+			compatible = "ti,da830-timer";
+			reg = <0x20000 0x1000>;
+			interrupts = <12>, <13>;
+			interrupt-names = "tint12", "tint34";
+			clocks = <&pll0_auxclk>;
+		};
 		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
 		mmc0: mmc@40000 {
@@ -384,12 +494,14 @@
 			interrupts = <16>;
 			dmas = <&edma0 16 0>, <&edma0 17 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc0 5>;
 			status = "disabled";
 		};
 		vpif: video@217000 {
 			compatible = "ti,da850-vpif";
 			reg = <0x217000 0x1000>;
 			interrupts = <92>;
+			power-domains = <&psc1 9>;
 			status = "disabled";
 
 			/* VPIF capture port */
@@ -412,6 +524,7 @@
 			interrupts = <72>;
 			dmas = <&edma1 28 0>, <&edma1 29 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc1 18>;
 			status = "disabled";
 		};
 		ehrpwm0: pwm@300000 {
@@ -419,6 +532,9 @@
 				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
 		ehrpwm1: pwm@302000 {
@@ -426,6 +542,9 @@
 				     "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
 		ecap0: ecap@306000 {
@@ -433,6 +552,9 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
 		ecap1: ecap@307000 {
@@ -440,6 +562,9 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
 		ecap2: ecap@308000 {
@@ -447,6 +572,9 @@
 				     "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
 		spi0: spi@41000 {
@@ -459,6 +587,8 @@
 			interrupts = <20>;
 			dmas = <&edma0 14 0>, <&edma0 15 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc0 4>;
+			power-domains = <&psc0 4>;
 			status = "disabled";
 		};
 		spi1: spi@30e000 {
@@ -471,6 +601,8 @@
 			interrupts = <56>;
 			dmas = <&edma0 18 0>, <&edma0 19 0>;
 			dma-names = "rx", "tx";
+			clocks = <&psc1 10>;
+			power-domains = <&psc1 10>;
 			status = "disabled";
 		};
 		usb0: usb@200000 {
@@ -482,6 +614,8 @@
 			dr_mode = "otg";
 			phys = <&usb_phy 0>;
 			phy-names = "usb-phy";
+			clocks = <&psc1 1>;
+			clock-ranges;
 			status = "disabled";
 
 			#address-cells = <1>;
@@ -505,6 +639,7 @@
 				interrupts = <58>;
 				#dma-cells = <2>;
 				#dma-channels = <4>;
+				power-domains = <&psc1 1>;
 				status = "okay";
 			};
 		};
@@ -512,13 +647,31 @@
 			compatible = "ti,da850-ahci";
 			reg = <0x218000 0x2000>, <0x22c018 0x4>;
 			interrupts = <67>;
+			clocks = <&psc1 8>, <&sata_refclk>;
+			clock-names = "fck", "refclk";
 			status = "disabled";
 		};
+		pll1: clock-controller@21a000 {
+			compatible = "ti,da850-pll1";
+			reg = <0x21a000 0x1000>;
+			clocks = <&ref_clk>;
+			clock-names = "clksrc";
+
+			pll1_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll1_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
 		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
+			clocks = <&psc1 5>;
+			clock-names = "fck";
+			power-domains = <&psc1 5>;
 			status = "disabled";
 		};
 		eth0: ethernet@220000 {
@@ -534,6 +687,8 @@
 					35
 					36
 					>;
+			clocks = <&psc1 5>;
+			power-domains = <&psc1 5>;
 			status = "disabled";
 		};
 		usb1: usb@225000 {
@@ -542,6 +697,7 @@
 			interrupts = <59>;
 			phys = <&usb_phy 1>;
 			phy-names = "usb-phy";
+			clocks = <&psc1 2>;
 			status = "disabled";
 		};
 		gpio: gpio@226000 {
@@ -552,6 +708,8 @@
 			interrupts = <42 43 44 45 46 47 48 49 50>;
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&psc1 3>;
+			clock-names = "gpio";
 			status = "disabled";
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -700,6 +858,17 @@
 				      <&pmx_core 142 147 1>,
 				      <&pmx_core 143 146 1>;
 		};
+		psc1: clock-controller@227000 {
+			compatible = "ti,da850-psc1";
+			reg = <0x227000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+				 <&async3_clk>;
+			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+			assigned-clocks = <&async3_clk>;
+			assigned-clock-parents = <&pll1_sysclk 2>;
+		};
 		pinconf: pin-controller@22c00c {
 			compatible = "ti,da850-pupd";
 			reg = <0x22c00c 0x8>;
@@ -713,6 +882,7 @@
 			reg-names = "mpu", "dat";
 			interrupts = <54>;
 			interrupt-names = "common";
+			power-domains = <&psc1 7>;
 			status = "disabled";
 			dmas = <&edma0 1 1>,
 				<&edma0 0 1>;
@@ -724,6 +894,9 @@
 			reg = <0x213000 0x1000>;
 			interrupts = <52>;
 			max-pixelclock = <37500>;
+			clocks = <&psc1 16>;
+			clock-names = "fck";
+			power-domains = <&psc1 16>;
 			status = "disabled";
 		};
 	};
@@ -735,6 +908,9 @@
 		reg = <0x68000000 0x00008000>;
 		ranges = <0 0 0x60000000 0x08000000
 			  1 0 0x68000000 0x00008000>;
+		clocks = <&psc0 3>;
+		clock-names = "aemif";
+		clock-ranges;
 		status = "disabled";
 	};
 	memctrl: memory-controller@b0000000 {
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 33230c8..7e18147 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -20,6 +20,11 @@
 		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
 	sound0: sound0 {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "DRA7xx-EVM";
@@ -198,8 +203,13 @@
 	extcon = <&extcon_usb1>;
 };
 
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
 &usb2 {
 	dr_mode = "host";
+	extcon = <&extcon_usb2>;
 };
 
 &atl {
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 0894593..6ed5f91 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -106,11 +106,6 @@
 		enable-active-high;
 	};
 
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
 	vtt_fixed: fixedregulator-vtt {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
@@ -406,10 +401,6 @@
 	vdd-supply = <&smps123_reg>;
 };
 
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
 &elm {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e03495a..a0ddf49 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1893,7 +1893,7 @@
 			};
 		};
 
-		dcan1: can@481cc000 {
+		dcan1: can@4ae3c000 {
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan1";
 			reg = <0x4ae3c000 0x2000>;
@@ -1903,7 +1903,7 @@
 			status = "disabled";
 		};
 
-		dcan2: can@481d0000 {
+		dcan2: can@48480000 {
 			compatible = "ti,dra7-d_can";
 			ti,hwmods = "dcan2";
 			reg = <0x48480000 0x2000>;
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index b7aeaee..c471bf3 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -265,3 +265,11 @@
 	/* Supplied by VDA_1V8_PHY */
 	vdda_video-supply = <&lp8732_ldo1_reg>;
 };
+
+&extcon_usb1 {
+	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index df174f5..e297b92 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -391,6 +391,7 @@
 
 &usb2 {
 	dr_mode = "host";
+	extcon = <&extcon_usb2>;
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 91e93ab..8f9df09 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -18,6 +18,16 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+
+			vbb-supply = <&abb_mpu>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index c07f005..5a46163 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -436,3 +436,17 @@
 	phys = <&pcie1_phy>, <&pcie2_phy>;
 	phy-names = "pcie-phy0", "pcie-phy1";
 };
+
+&extcon_usb1 {
+	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&m_can0 {
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 1c88c58..613e4dc 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -11,9 +11,73 @@
 / {
 	compatible = "ti,dra762", "ti,dra7";
 
+	ocp {
+		target-module@42c01900 {
+			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+			ranges = <0x0 0x42c00000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x42c01900 0x4>,
+			      <0x42c01904 0x4>,
+			      <0x42c01908 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
+			ti,syss-mask = <1>;
+			clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
+			clock-names = "fck";
+
+			m_can0: mcan@1a00 {
+				compatible = "bosch,m_can";
+				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+				reg-names = "m_can", "message_ram";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0", "int1";
+				clocks = <&mcan_clk>, <&l3_iclk_div>;
+				clock-names = "cclk", "hclk";
+				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+			};
+		};
+	};
+
 };
 
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
 	ti,irqs-skip = <10 67 68 133 139 140>;
 };
+
+&scm_conf_clocks {
+	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x03fc>;
+		ti,bit-shift=<20>;
+		ti,latch-bit=<26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+		assigned-clock-rates = <80000000>;
+	};
+
+	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+		reg = <0x3fc>;
+		ti,bit-shift = <29>;
+		ti,latch-bit=<26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+	};
+
+	mcan_clk: mcan_clk@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x3fc>;
+	};
+};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 0af44b7..1bb8e5c 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the KZM9D board
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index fec1241..373ea87 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the EMEV2 SoC
  *
  * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 962af97..27a1ee2 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -78,6 +78,22 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
 		};
 	};
 
@@ -226,7 +242,7 @@
 			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index dfe41b6..6085e92 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -735,7 +735,7 @@
 			reg = <0x100C0000 0x100>;
 			interrupts = <2 4>;
 			status = "disabled";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		jpeg_codec: jpeg-codec@11840000 {
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 88fb47c..b6091c2 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -55,6 +55,19 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x901>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index dc11ca1..c0476c2 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -94,6 +94,8 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
 
 		key-down {
 			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
@@ -138,6 +140,8 @@
 			compatible = "maxim,max77693";
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
 
 			regulators {
@@ -184,6 +188,8 @@
 			compatible = "maxim,max17047";
 			interrupt-parent = <&gpx2>;
 			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_fuel_irq>;
 			reg = <0x36>;
 
 			maxim,over-heat-temp = <700>;
@@ -574,6 +580,8 @@
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 IRQ_TYPE_NONE>;
+		pinctrl-0 = <&max77686_irq>;
+		pinctrl-names = "default";
 		reg = <0x09>;
 		#clock-cells = <1>;
 
@@ -1007,6 +1015,31 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
+	gpio_keys: gpio-keys {
+		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_irq: max77693-irq {
+		samsung,pins = "gpx1-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_fuel_irq: max77693-fuel-irq {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sdhci2_cd: sdhci2-cd-irq {
+		samsung,pins = "gpx3-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
 	hdmi_hpd: hdmi-hpd {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -1238,7 +1271,7 @@
 	bus-width = <4>;
 	cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
 	pinctrl-names = "default";
 	vmmc-supply = <&ldo21_reg>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
deleted file mode 100644
index 489b58c..0000000
--- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4412 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 7b43c10..51f72f0 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -49,21 +49,30 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA01>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@a02 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA02>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu@a03 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0xA03>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 5d2f0a0..67f9b45 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -169,6 +169,11 @@
 		pwm: pwm@12dd0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x12DD0000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
 		};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2daf505..da163a4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -84,6 +84,29 @@
 			compatible = "arm,cortex-a15";
 			reg = <1>;
 			clock-frequency = <1700000000>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <140000>;
+
+			operating-points = <
+				1700000 1300000
+				1600000 1250000
+				1500000 1225000
+				1400000 1200000
+				1300000 1150000
+				1200000 1125000
+				1100000 1100000
+				1000000 1075000
+				 900000 1050000
+				 800000 1025000
+				 700000 1012500
+				 600000 1000000
+				 500000  975000
+				 400000  950000
+				 300000  937500
+				 200000  925000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -278,7 +301,7 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		sata: sata@122f0000 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 20e789e..57fc9c9 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -93,7 +93,7 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu1: tmu@10064000 {
@@ -102,7 +102,7 @@
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu2: tmu@10068000 {
@@ -111,7 +111,7 @@
 			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu3: tmu@1006c000 {
@@ -120,7 +120,7 @@
 			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		mmc_0: mmc@12200000 {
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index a8e4494..0ee6e92 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -38,6 +38,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
@@ -49,6 +50,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
@@ -60,6 +62,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
@@ -83,6 +86,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
+			clocks = <&clock CLK_KFC_CLK>;
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
@@ -94,6 +98,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
+			clocks = <&clock CLK_KFC_CLK>;
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
@@ -105,6 +110,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
+			clocks = <&clock CLK_KFC_CLK>;
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
deleted file mode 100644
index fbc77cb..0000000
--- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5420 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- * Copyright (c) 2017 Krzysztof Kozlowski <krzk@kernel.org>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <0>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index f4e8c58..aaff158 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -738,7 +738,7 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu1: tmu@10064000 {
@@ -747,7 +747,7 @@
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>;
 			clock-names = "tmu_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu2: tmu@10068000 {
@@ -756,7 +756,7 @@
 			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_cpu3: tmu@1006c000 {
@@ -765,7 +765,7 @@
 			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		tmu_gpu: tmu@100a0000 {
@@ -774,7 +774,7 @@
 			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#include "exynos5420-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		sysmmu_g2dr: sysmmu@10a60000 {
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index 7c130a0..e4a5857 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -37,6 +37,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
+			clocks = <&clock CLK_KFC_CLK>;
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
@@ -48,6 +49,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
+			clocks = <&clock CLK_KFC_CLK>;
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
@@ -59,6 +61,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
+			clocks = <&clock CLK_KFC_CLK>;
 			clock-frequency = <1000000000>;
 			cci-control-port = <&cci_control0>;
 			operating-points-v2 = <&cluster_a7_opp_table>;
@@ -69,8 +72,8 @@
 		cpu4: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
-			clocks = <&clock CLK_ARM_CLK>;
 			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
@@ -82,6 +85,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
@@ -93,6 +97,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
@@ -104,6 +109,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
+			clocks = <&clock CLK_ARM_CLK>;
 			clock-frequency = <1800000000>;
 			cci-control-port = <&cci_control1>;
 			operating-points-v2 = <&cluster_a15_opp_table>;
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
new file mode 100644
index 0000000..ebefb72
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Storm Semiconductor SL93512R_BRD
+ * Gemini reference design, also initially called
+ * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor.
+ * The series were later acquired by Cortina Systems.
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD";
+	compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB Samsung K4H511638B */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_WPS_BUTTON>;
+			label = "WPS";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		button-setup {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-harddisk {
+			label = "sq201:green:harddisk";
+			/* Conflict with LCD (no problem) */
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+		led-green-wireless {
+			label = "sq201:green:wireless";
+			/* Conflict with NAND flash CE0 (no problem) */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7385";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partition@0 {
+				label = "BOOT";
+				reg = <0x00000000 0x00020000>;
+				read-only;
+			};
+			partition@120000 {
+				label = "Kern";
+				reg = <0x00020000 0x00300000>;
+			};
+			partition@320000 {
+				label = "Ramdisk";
+				reg = <0x00320000 0x00600000>;
+			};
+			partition@920000 {
+				label = "Application";
+				reg = <0x00920000 0x00600000>;
+			};
+			partition@f20000 {
+				label = "VCTL";
+				reg = <0x00f20000 0x00020000>;
+				read-only;
+			};
+			partition@f40000 {
+				label = "CurConf";
+				reg = <0x00f40000 0x000a0000>;
+				read-only;
+			};
+			partition@fe0000 {
+				label = "FIS directory";
+				reg = <0x00fe0000 0x00020000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0egrp cover line 16 used by HD LED
+				 * gpio0fgrp cover line 17, 18 used by wireless LED and reset button
+				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
+				 * gpio0kgrp cover line 31 used by USB LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0egrp",
+						"gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover lines used by SPI for
+				 * the Vitesse chip (28-31)
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Control pad skew comes from sl_switch.c in the vendor code */
+					conf0 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf1 {
+						pins = "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf3 {
+						pins = "U11 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						pins = "P8 GMAC0 TXEN";
+						skew-delay = <7>; /* 5 at another place? */
+					};
+					conf6 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf7 {
+						pins = "R8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Appears in sl351x_gmac.c in the vendor code */
+					conf9 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+				};
+			};
+		};
+
+		/* Both interfaces brought out on SATA connectors */
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ata@63000000 {
+			status = "okay";
+		};
+
+		ata@63400000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
index e5cf9d1..3787cf3 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -55,6 +55,75 @@
 		};
 	};
 
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7395";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
 	soc {
 		flash@30000000 {
 			/*
@@ -108,6 +177,7 @@
 				/*
 				 * gpio0fgrp cover line 18 used by reset button
 				 * gpio0ggrp cover line 20 used by info LED
+				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
 				 * gpio0kgrp cover line 31 used by USB LED
 				 */
 				gpio0_default_pins: pinctrl-gpio0 {
@@ -115,9 +185,76 @@
 						function = "gpio0";
 						groups = "gpio0fgrp",
 						"gpio0ggrp",
+						"gpio0hgrp",
 						"gpio0kgrp";
 					};
 				};
+				/*
+				 * gpio0dgrp cover lines used by the SPI
+				 * to the Vitesse G5x chip.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Settings come from memory dump in PLATO */
+					conf0 {
+						pins = "V8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf4 {
+						pins = "T10 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf5 {
+						pins = "Y11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf6 {
+						pins = "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf7 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
+					conf9 {
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+						drive-strength = <16>;
+					};
+				};
 			};
 		};
 
@@ -132,6 +269,11 @@
 			pinctrl-0 = <&gpio0_default_pins>;
 		};
 
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
 		pci@50000000 {
 			status = "okay";
 			interrupt-map-mask = <0xf800 0 0 7>;
@@ -154,6 +296,23 @@
 				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
 		ata@63000000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
new file mode 100644
index 0000000..e31a9e3
--- /dev/null
+++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach audiocamera shield expansion board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	/* On-board camera clock. */
+	camera_clk: camera_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&pinctrl {
+	i2c1_pins: i2c1 {
+		/* P1_2 as SCL; P1_3 as SDA */
+		pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>;
+	};
+
+	vio_pins: vio {
+		/* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */
+		pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */
+			 <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */
+			 <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */
+			 <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */
+			 <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */
+			 <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */
+			 <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */
+			 <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */
+			 <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */
+			 <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */
+			 <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	camera@48 {
+		compatible = "aptina,mt9v111";
+		reg = <0x48>;
+
+		clocks = <&camera_clk>;
+
+		port {
+			mt9v111_out: endpoint {
+				remote-endpoint = <&ceu_in>;
+			};
+		};
+	};
+};
+
+&ceu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vio_pins>;
+
+	status = "okay";
+
+	port {
+		ceu_in: endpoint {
+			hsync-active = <1>;
+			vsync-active = <1>;
+			bus-width = <8>;
+			pclk-sample = <1>;
+			remote-endpoint = <&mt9v111_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index ed14aea..5027871 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -56,6 +56,16 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 
 		cpu@902 {
@@ -65,6 +75,16 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 
 		cpu@903 {
@@ -74,6 +94,16 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts
new file mode 100644
index 0000000..db52ddc
--- /dev/null
+++ b/arch/arm/boot/dts/imx31-lite.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+
+/dts-v1/;
+
+#include "imx31.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LogicPD i.MX31 Lite";
+	compatible = "logicpd,imx31-lite", "fsl,imx31";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x8000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ata {
+	status = "okay";
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1a {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw1b {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2a {		/* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2b {		/* NVCC10 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo {		/* NVCC1 and NVCC7 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi {		/* VIOHI */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio {	/* VAUDIO */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vcam {		/* NVCC4 */
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vgen {		/* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc2 {		/* NVCC3 */
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart3 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x0 0x200000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
+	};
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		reg = <4 0x0 0x100>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 4642c81..ca1419c 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 //
+// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
 // Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
 
 / {
@@ -15,11 +16,20 @@
 	memory { device_type = "memory"; };
 
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
 	};
 
 	cpus {
@@ -47,6 +57,14 @@
 		interrupt-parent = <&avic>;
 		ranges;
 
+		iram: iram@1fffc000 {
+			compatible = "mmio-sram";
+			reg = <0x1fffc000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1fffc000 0x4000>;
+		};
+
 		aips@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
@@ -54,6 +72,34 @@
 			reg = <0x43f00000 0x100000>;
 			ranges;
 
+			i2c1: i2c@43f80000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				interrupts = <10>;
+				clocks = <&clks 33>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				interrupts = <3>;
+				clocks = <&clks 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ata: ata@43f8c000 {
+				compatible = "fsl,imx31-pata", "fsl,imx27-pata";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <15>;
+				clocks = <&clks 26>;
+				status = "disabled";
+			};
+
 			uart1: serial@43f90000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43f90000 0x4000>;
@@ -72,6 +118,29 @@
 				status = "disabled";
 			};
 
+			i2c2: i2c@43f98000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				interrupts = <4>;
+				clocks = <&clks 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x43fa4000 0x4000>;
+				interrupts = <14>;
+				clocks = <&clks 10>, <&clks 53>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			kpp: kpp@43fa8000 {
 				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
 				reg = <0x43fa8000 0x4000>;
@@ -106,6 +175,28 @@
 			reg = <0x50000000 0x100000>;
 			ranges;
 
+			sdhci1: sdhci@50004000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50004000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 10>, <&clks 20>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 20 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: sdhci@50008000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50008000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 10>, <&clks 21>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 21 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
 			uart3: serial@5000c000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x5000c000 0x4000>;
@@ -115,6 +206,19 @@
 				status = "disabled";
 			};
 
+			spi2: cspi@50010000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 10>, <&clks 54>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			iim: iim@5001c000 {
 				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
 				reg = <0x5001c000 0x1000>;
@@ -137,6 +241,19 @@
 				#clock-cells = <1>;
 			};
 
+			spi3: cspi@53f84000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <17>;
+				clocks = <&clks 10>, <&clks 28>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			gpt: timer@53f90000 {
 				compatible = "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;
@@ -144,6 +261,112 @@
 				clocks = <&clks 10>, <&clks 22>;
 				clock-names = "ipg", "per";
 			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rng@53fb0000 {
+				compatible = "fsl,imx31-rnga";
+				reg = <0x53fb0000 0x4000>;
+				interrupts = <22>;
+				clocks = <&clks 29>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: sdma@53fd4000 {
+				compatible = "fsl,imx31-sdma";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <34>;
+				clocks = <&clks 10>, <&clks 27>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
+			};
+
+			rtc: rtc@53fd8000 {
+				compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
+				reg = <0x53fd8000 0x4000>;
+				interrupts = <25>;
+				clocks = <&clks 2>, <&clks 40>;
+				clock-names = "ref", "ipg";
+			};
+
+			wdog: wdog@53fdc000 {
+				compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 41>;
+			};
+
+			pwm: pwm@53fe0000 {
+				compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <26>;
+				clocks = <&clks 10>, <&clks 42>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		emi@b8000000 { /* External Memory Interface */
+			compatible = "simple-bus";
+			reg = <0xb8000000 0x5000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nfc: nand@b8000000 {
+				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
+				reg = <0xb8000000 0x1000>;
+				interrupts = <33>;
+				clocks = <&clks 9>;
+				dmas = <&sdma 30 17 0>;
+				dma-names = "rx-tx";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				clocks = <&clks 56>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges = <0 0 0xa0000000 0x08000000
+					  1 0 0xa8000000 0x08000000
+					  2 0 0xb0000000 0x02000000
+					  3 0 0xb2000000 0x02000000
+					  4 0 0xb4000000 0x02000000
+					  5 0 0xb6000000 0x02000000>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index f0622ec..682a997 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -98,14 +98,6 @@
 	status = "okay";
 };
 
-&usbh2 {
-	status = "okay";
-};
-
-&usbh3 {
-	status = "okay";
-};
-
 &usbotg {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
index 97e6e7f..4386334 100644
--- a/arch/arm/boot/dts/imx50-pinfunc.h
+++ b/arch/arm/boot/dts/imx50-pinfunc.h
@@ -34,7 +34,7 @@
 #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_2				0x030 0x2dc 0x000 0x0 0x0
 #define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
@@ -44,7 +44,7 @@
 #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_3				0x038 0x2e4 0x000 0x0 0x0
 #define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index a9b712d..7fae2ff 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -209,24 +209,6 @@
 				status = "disabled";
 			};
 
-			usbh2: usb@53f80400 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh3: usb@53f80600 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index b8ca73d..ba60b0c 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -170,20 +170,15 @@
 		mux-ext-port = <3>;
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clk_usb>;
-			clock-names = "main_clk";
-			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-			vcc-supply = <&vusb_reg>;
-			#phy-cells = <0>;
-		};
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
 	};
 };
 
@@ -401,6 +396,10 @@
 	status = "okay";
 };
 
+&pmu {
+	secure-reg-access;
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -429,7 +428,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
 	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbh1phy>;
+	fsl,usbphy = <&usbphy1>;
 	phy_type = "ulpi";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index b3d952f..e9e819f 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -83,19 +83,12 @@
 		fsl,mux-ext-port = <3>;
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-			clock-frequency = <19200000>;
-			#phy-cells = <0>;
-		};
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
 	};
 };
 
@@ -275,7 +268,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbh1phy>;
+	fsl,usbphy = <&usbphy1>;
 	dr_mode = "host";
 	phy_type = "ulpi";
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
index 8a87868..469cce2 100644
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -476,6 +476,17 @@
 	status = "okay";
 };
 
+&gpio1 {
+	unused-sd3-wp-gpio {
+		/*
+		 * See pinctrl_esdhc1 below for more details on this
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
@@ -542,7 +553,7 @@
 
 		rmi4-f11@11 {
 			reg = <0x11>;
-			touchscreen-inverted-y;
+			touchscreen-inverted-x;
 			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};
@@ -554,6 +565,10 @@
 	remote-endpoint = <&display_in>;
 };
 
+&pmu {
+	secure-reg-access;
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -578,10 +593,47 @@
 	rave-sp {
 		compatible = "zii,rave-sp-rdu1";
 		current-speed = <38400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		watchdog {
 			compatible = "zii,rave-sp-watchdog";
 		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+
+		eeprom@ae {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xae 0x200>;
+			zii,eeprom-name = "switch-eeprom";
+			/*
+			 * Not all RDU1s have this functionality, so we
+			 * rely on the bootloader to enable this
+			 */
+			status = "disabled";
+		};
 	};
 };
 
@@ -620,6 +672,10 @@
 	status = "okay";
 };
 
+&wdog1 {
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl_ampgpio: ampgpiogrp {
 		fsl,pins = <
@@ -660,6 +716,23 @@
 			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
 			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
 			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			/*
+			 * GPIO1_1 is not directly used by eSDHC1 in
+			 * any capacity, but earlier versions of RDU1
+			 * used that pin as WP GPIO for eSDHC3 and
+			 * because of that that pad has an external
+			 * pull-up resistor. This is problematic
+			 * because out of reset the pad is configured
+			 * as ALT0 which serves as SD1_WP, which, when
+			 * pulled high by and external pull-up, will
+			 * inhibit execution of any write request to
+			 * attached eMMC device.
+			 *
+			 * To avoid this problem we configure the pad
+			 * to ALT1/GPIO and avoid driving SD1_WP
+			 * signal high.
+			 */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x0000
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
new file mode 100644
index 0000000..26cf085
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU2 Mezz Board";
+	compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port5";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port6";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "port7";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "mezz2esb";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "atmel,at45", "atmel,dataflash";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&vgen3_reg>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-mezz";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x20a4
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x2004
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+			MX51_PAD_EIM_A20__GPIO2_14		0x0085
+			MX51_PAD_EIM_A21__GPIO2_15		0x00e5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x100
+			MX51_PAD_EIM_D23__GPIO2_7		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
new file mode 100644
index 0000000..e6ebac8
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -0,0 +1,467 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU3 ESB board";
+	compatible = "zii,imx51-scu3-esb", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		reg = <0x90000000 0>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port3";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "scu2scu";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "esb2host";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "esb2mezz";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					phy-mode = "mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ipu {
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-esb";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_CK__GPIO4_20		0xc5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			MX51_PAD_USBH1_DATA0__UART2_CTS		0x1c5
+			MX51_PAD_USBH1_DATA3__UART2_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_RXD__GPIO4_19		0x100
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index fe01b89..5c4ba91 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -93,18 +93,17 @@
 		};
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
 
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-			#phy-cells = <0>;
-		};
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
 	};
 
 	display-subsystem {
@@ -250,6 +249,11 @@
 				};
 			};
 
+			aipstz1: bridge@73f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x73f00000 0x60>;
+			};
+
 			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
@@ -435,6 +439,11 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
+			aipstz2: bridge@83f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x83f00000 0x60>;
+			};
+
 			iim: iim@83f98000 {
 				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 				reg = <0x83f98000 0x4000>;
@@ -442,6 +451,11 @@
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
 			};
 
+			tigerp: tigerp@83fa0000 {
+				compatible = "fsl,imx51-tigerp";
+				reg = <0x83fa0000 0x28>;
+			};
+
 			owire: owire@83fa4000 {
 				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
 				reg = <0x83fa4000 0x4000>;
@@ -528,6 +542,11 @@
 				status = "disabled";
 			};
 
+			m4if: m4if@83fd8000 {
+				compatible = "fsl,imx51-m4if";
+				reg = <0x83fd8000 0x1000>;
+			};
+
 			weim: weim@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
@@ -588,6 +607,26 @@
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
+
+			vpu@83ff4000 {
+				compatible = "fsl,imx51-vpu", "cnm,codahx4";
+				reg = <0x83ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&iram>;
+			};
+
+			sahara: crypto@83ff8000 {
+				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				reg = <0x83ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
new file mode 100644
index 0000000..0e7f071
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-ddc.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	imx53-kp-ddc {
+		pinctrl_disp: dispgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts
new file mode 100644
index 0000000..6e3d71b
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-hsc.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 HSC";
+	compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
+};
+
+&fec {
+	status = "okay";
+
+	fixed-link { /* RMII fixed link to LAN9303 */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	switch: switch@a {
+		compatible = "smsc,lan9303-i2c";
+		reg = <0xa>;
+		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		reset-duration = <400>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 { /* RMII fixed link to master */
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&fec>;
+			};
+
+			port@1 { /* external port 1 */
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 { /* external port 2 */
+				reg = <2>;
+				label = "lan2";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
new file mode 100644
index 0000000..8b25416
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp.dtsi
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	imx53-kp-common {
+		pinctrl_buzzer: buzzergrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+			>;
+		};
+
+		pinctrl_gpiobuttons: gpiobuttonsgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+			>;
+		};
+
+		pinctrl_kp_common: kpcommongrp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+			>;
+		};
+
+		pinctrl_leds: ledgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+			>;
+		};
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index 3aa6f69..cdb90be 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -140,6 +140,25 @@
 		regulator-always-on;
 	};
 
+	reg_3v3: regulator-3v3 {
+		/* TPS54320 */
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_lcd: regulator-3v3-lcd {
+		/* MIC2009 */
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V3";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
 	pwm_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm2 0 50000>;
@@ -154,6 +173,7 @@
 				     234 237 239 242 244 247 249 252 255>;
 		default-brightness-level = <0>;
 		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3_lcd>;
 	};
 
 	leds {
@@ -198,8 +218,9 @@
 		};
 	};
 
-	usbphy2: usbphy2 {
+	usbphy2: usbphy-2 {
 		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
 		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
 		clock-names = "main_clk";
 		clock-frequency = <24000000>;
@@ -208,8 +229,9 @@
 		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
 	};
 
-	usbphy3: usbphy3 {
+	usbphy3: usbphy-3 {
 		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
 		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
 		clock-names = "main_clk";
 
@@ -221,6 +243,7 @@
 
 	panel-lvds0 {
 		compatible = "nvd,9128";
+		power-supply = <&reg_3v3_lcd>;
 
 		port {
 			panel_in_lvds0: endpoint {
@@ -230,6 +253,14 @@
 	};
 };
 
+&usbphy0 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&usbphy1 {
+	vcc-supply = <&reg_3v3>;
+};
+
 &audmux {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
@@ -414,6 +445,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_3v3>;
 	phy-mode = "rmii";
 	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
@@ -562,6 +594,10 @@
 	};
 };
 
+&pmu {
+	secure-reg-access;
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index ef7658a..7423d46 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -153,7 +153,6 @@
 	imx53-qsb {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
 				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
 				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
@@ -180,6 +179,12 @@
 			>;
 		};
 
+		pinctrl_codec: codecgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+			>;
+		};
+
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
 				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
@@ -310,6 +315,8 @@
 	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
 		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 1a7a7bb..6386185 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -113,7 +113,7 @@
 		};
 	};
 
-	pmu {
+	pmu: pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupt-parent = <&tzic>;
 		interrupts = <77>;
@@ -672,6 +672,11 @@
 				status = "disabled";
 			};
 
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
 			owire: owire@63fa4000 {
 				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
 				reg = <0x63fa4000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 3dee3af..9de45a7 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -221,9 +221,6 @@
 
 /* Colibri MMC */
 &usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_mmc_cd>;
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
new file mode 100644
index 0000000..bf53f05
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index 6b2d2913..df8607f 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -6,11 +6,156 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6dl.dtsi"
 
 / {
 	model = "BTicino i.MX6DL Mamoj board";
 	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
+		default-brightness-level = <7>;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_lcd_lr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-dvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 0>;
+		enable-active-high;
+		startup-delay-us = <21000>;
+	};
+
+	reg_lcd_power: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-enable";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_3v3>;
+	};
+
+	reg_lcd_vgl: regulator-lcd-vgl {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_power>;
+	};
+
+	reg_lcd_vgh: regulator-lcd-vgh {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgh";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_avdd>;
+	};
+
+	reg_lcd_vcom: regulator-lcd-vcom {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vcom";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <11000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgh>;
+	};
+
+	reg_lcd_lr: regulator-lcd-lr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vcom>;
+	};
+
+	reg_lcd_avdd: regulator-lcd-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-avdd";
+		regulator-min-microvolt = <10280000>;
+		regulator-max-microvolt = <10280000>;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgl>;
+	};
+
+	reg_usb_host: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhost-vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhost>;
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+		gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &fec {
@@ -147,12 +292,56 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -200,6 +389,59 @@
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04	   0x10 /* VDOUT_RESET */
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x40013058 /* EN_LCD33V */
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13		0x4001b0b0 /* EN_AVDD */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x40013058 /* ENVGH */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x40013058 /* ENVGL */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x40013058 /* LCD_POWER */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x40013058 /* EN_VCOM_LCD */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x40013058 /* LCD_L_R */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x40013058 /* LCD_U_D */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
 	pinctrl_uart3: uart3grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
@@ -207,6 +449,23 @@
 		>;
 	};
 
+	pinctrl_usbhost: usbhostgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
+		>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
@@ -221,4 +480,10 @@
 			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
 		>;
 	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x4001b0b0
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
index 30ce2c0..61fa309 100644
--- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts
+++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
index ec53d7a..ef58d3b 100644
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2e98c92..dd3226f 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -19,36 +19,8 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
+	chosen {
+		stdout-path = "serial1:115200n8";
 	};
 
 	leds {
@@ -82,6 +54,28 @@
 			mux-int-port = <1>;
 			mux-ext-port = <3>;
 	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &audmux {
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index b384913..f0607eb 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -33,6 +33,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -50,6 +51,29 @@
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index aa0e631..707ac9a 100644
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -62,6 +62,10 @@
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -109,6 +113,7 @@
 		 */
 		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
+		power-supply = <&reg_3v3_sw>;
 
 		port {
 			lcd_panel_in: endpoint {
@@ -127,19 +132,30 @@
 		enable-active-high;
 		status = "okay";
 	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V_SW";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
 
 &backlight {
 	brightness-levels = <0 127 191 223 239 247 251 255>;
 	default-brightness-level = <1>;
+	power-supply = <&reg_3v3_sw>;
 	status = "okay";
 };
 
 &can1 {
+	xceiver-supply = <&reg_3v3_sw>;
 	status = "okay";
 };
 
 &can2 {
+	xceiver-supply = <&reg_3v3_sw>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index e8dccf5..4e1c8fe 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -63,6 +63,10 @@
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 6831dfd..469e3d0 100644
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -62,6 +62,10 @@
 		rtc1 = &snvs_rtc;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 65ef4ca..18ae4f3 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -187,6 +187,72 @@
 	>;
 };
 
+&cpu1 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu2 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu3 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
 &ecspi1 {
 	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
index acd3d33..95b2efd 100644
--- a/arch/arm/boot/dts/imx6q-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -20,6 +20,14 @@
 	status = "okay";
 };
 
+&mipi_csi {
+	status = "okay";
+};
+
+&ov5640 {
+	status = "okay";
+};
+
 &usdhc3 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
index 2a3c44f..03bec0c 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
index c5d59ba..eb4eecb 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
index df8ff39..435445a 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index f2368a0..c54362f 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -177,6 +177,7 @@
 		touchscreen-size-y = <480>;
 		touchscreen-inverted-x;
 		touchscreen-inverted-y;
+		wakeup-source;
 	};
 
 	rtc@68 {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 77f8f03..0193ee6 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -38,6 +38,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -50,25 +51,106 @@
 			soc-supply = <&reg_soc>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 64fbee6..05f07ea 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -61,25 +61,17 @@
 		status = "disabled";
 	};
 
-	reg_1p8v: regulator-1p8v {
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
 
-	reg_2p5v: regulator-2p5v {
+	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
+		regulator-name = "+V3.3_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
@@ -297,7 +289,7 @@
 
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -322,8 +314,9 @@
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
 	};
 
 	/* STMPE811 touch screen controller */
@@ -455,9 +448,10 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
+	disable-wp;
+	no-1-8-v;
 	status = "disabled";
 };
 
@@ -465,9 +459,10 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
-	voltage-ranges = <3300 3300>;
+	disable-wp;
+	no-1-8-v;
 	status = "disabled";
 };
 
@@ -475,9 +470,9 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	non-removable;
 	status = "okay";
 };
@@ -952,38 +947,4 @@
 			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
 		>;
 	};
-
-	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x170f9
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 76035db..87e15e7c 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -56,25 +56,17 @@
 		status = "disabled";
 	};
 
-	reg_1p8v: regulator-1p8v {
+	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "1P8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
 
-	reg_2p5v: regulator-2p5v {
+	reg_module_3v3_audio: regulator-module-3v3-audio {
 		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
+		regulator-name = "+V3.3_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
@@ -227,7 +219,7 @@
 
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -252,8 +244,9 @@
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
 		lrclk-strength = <3>;
 	};
 
@@ -385,10 +378,12 @@
 /* Colibri MMC */
 &usdhc1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vqmmc-supply = <&reg_3p3v>;
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	disable-wp;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <4>;
-	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "disabled";
 };
 
@@ -396,9 +391,9 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_module_3v3>;
 	bus-width = <8>;
-	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	non-removable;
 	status = "okay";
 };
@@ -479,8 +474,7 @@
 
 	pinctrl_gpio_keys: gpiokeys {
 		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b0
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
 		>;
 	};
 
@@ -567,7 +561,7 @@
 
 	pinctrl_mmc_cd: gpiommccd {
 		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x80000000
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
 		>;
 	};
 
@@ -698,40 +692,6 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3100mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170b9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100b9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170b9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170b9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170b9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170b9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170b9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170b9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170b9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170b9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170b9
-		>;
-	};
-
-	pinctrl_usdhc3_200mhz: usdhc3200mhzgrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170f9
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100f9
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170f9
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170f9
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170f9
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170f9
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x170f9
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x170f9
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x170f9
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x170f9
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x170f9
-		>;
-	};
-
 	pinctrl_weim_cs0: weimcs0grp {
 		fsl,pins = <
 			/* nEXT_CS0 */
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 0a15749..9ce9937 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -65,8 +65,7 @@
 		regulator-always-on;
 	};
 
-
-	reg_2p5v: regulator-3p3v {
+	reg_2p5v: regulator-2p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "2P5V";
 		regulator-min-microvolt = <2500000>;
@@ -215,6 +214,29 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
 	sgtl5000: codec@a {
 		#sound-dai-cells = <0>;
 		compatible = "fsl,sgtl5000";
@@ -226,6 +248,20 @@
 	};
 };
 
+&mipi_csi {
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
 &pwm3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
@@ -353,7 +389,14 @@
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
 			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index aab088f..29baf25 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -292,6 +256,7 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 
 	rtc@6f {
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 87ca6ea..39200e5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2015 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -442,6 +406,7 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index f5b763d..572abd7 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -360,6 +324,7 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 596866b..98384a6 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -370,6 +334,7 @@
 		reg = <0x38>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 0e28e36..9f11f1f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -6,6 +6,10 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
+	chosen {
+		stdout-path = &uart4;
+	};
+
 	memory@10000000 {
 		reg = <0x10000000 0x80000000>;
 	};
@@ -155,6 +159,27 @@
 				gpio-controller;
 				#gpio-cells = <2>;
 			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 15744ad..6e46a19 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -341,6 +341,7 @@
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index e1afa54..381bf61 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -8,30 +8,6 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
 	sound {
 		compatible = "fsl,imx6-wandboard-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
@@ -52,6 +28,32 @@
 		spdif-controller = <&spdif>;
 		spdif-out;
 	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &audmux {
@@ -174,6 +176,12 @@
 			>;
 		};
 
+		pinctrl_usbotgvbus: usbotgvbusgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			>;
+		};
+
 		pinctrl_usdhc1: usdhc1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
@@ -248,10 +256,11 @@
 };
 
 &usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index f14df0b..7fff371 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -320,10 +320,36 @@
 	rave-sp {
 		compatible = "zii,rave-sp-rdu2";
 		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		watchdog {
 			compatible = "zii,rave-sp-watchdog";
 		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
 	};
 };
 
@@ -569,14 +595,14 @@
 
 		rmi4-f11@11 {
 			reg = <0x11>;
-			touchscreen-inverted-y;
+			touchscreen-inverted-x;
 			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};
 
 		rmi4-f12@12 {
 			reg = <0x12>;
-			touchscreen-inverted-y;
+			touchscreen-inverted-x;
 			touchscreen-swapped-x-y;
 			syna,sensor-type = <1>;
 		};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 911141e..61d2d26 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -922,7 +922,6 @@
 
 			crypto: caam@2100000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <4>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
index a39b860..741d1ed 100644
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
index 011726c..1593ac8 100644
--- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
+++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2017 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 92ad01f..679b448 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -12,6 +12,10 @@
 	model = "Freescale i.MX6 SoloLite EVK Board";
 	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -73,6 +77,8 @@
 
 	reg_lcd_3v3: regulator-lcd-3v3 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
 		regulator-name = "lcd-3v3";
 		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
@@ -195,6 +201,7 @@
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {
@@ -406,6 +413,12 @@
 			>;
 		};
 
+		pinctrl_reg_lcd_3v3: reglcd3v3grp {
+			fsl,pins = <
+				MX6SL_PAD_KEY_ROW5__GPIO4_IO03    0x17059
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 994e48d..7a4f5da 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -60,6 +60,7 @@
 				396000          1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
 					<&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
 					<&clks IMX6SL_CLK_PLL1_SYS>;
@@ -523,8 +524,8 @@
 				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x110>;
 					anatop-vol-bit-shift = <8>;
@@ -553,8 +554,8 @@
 				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2850000>;
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x130>;
 					anatop-vol-bit-shift = <8>;
@@ -680,10 +681,36 @@
 				#interrupt-cells = <3>;
 				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
-				pu-supply = <&reg_pu>;
-				clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
-					 <&clks IMX6SL_CLK_GPU2D_PODF>;
-				#power-domain-cells = <1>;
+				clocks = <&clks IMX6SL_CLK_IPG>;
+				clock-names = "ipg";
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@0 {
+						reg = <0>;
+						#power-domain-cells = <0>;
+					};
+
+					pd_pu: power-domain@1 {
+						reg = <1>;
+						#power-domain-cells = <0>;
+						power-supply = <&reg_pu>;
+						clocks = <&clks IMX6SL_CLK_GPU2D_OVG>,
+						         <&clks IMX6SL_CLK_GPU2D_PODF>;
+					};
+
+					pd_disp: power-domain@2 {
+						reg = <2>;
+						#power-domain-cells = <0>;
+						clocks = <&clks IMX6SL_CLK_LCDIF_AXI>,
+							 <&clks IMX6SL_CLK_LCDIF_PIX>,
+							 <&clks IMX6SL_CLK_EPDC_AXI>,
+							 <&clks IMX6SL_CLK_EPDC_PIX>,
+							 <&clks IMX6SL_CLK_PXP_AXI>;
+					};
+				};
 			};
 
 			gpr: iomuxc-gpr@20e0000 {
@@ -738,6 +765,7 @@
 					 <&clks IMX6SL_CLK_DUMMY>;
 				clock-names = "pix", "axi", "disp_axi";
 				status = "disabled";
+				power-domains = <&pd_disp>;
 			};
 
 			dcp: dcp@20fc000 {
@@ -921,5 +949,25 @@
 				status = "disabled";
 			};
 		};
+
+		gpu_2d: gpu@2200000 {
+			compatible = "vivante,gc";
+			reg = <0x02200000 0x4000>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
+
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6SL_CLK_MMDC_ROOT>,
+				 <&clks IMX6SL_CLK_GPU2D_OVG>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
new file mode 100644
index 0000000..c8e1155
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -0,0 +1,463 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sll.dtsi"
+
+/ {
+	model = "Freescale i.MX6SLL EVK Board";
+	compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_usb_otg1_vbus: regulator-otg1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg2_vbus: regulator-otg2-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_otg2_vbus>;
+		regulator-name = "usb_otg2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_aud3v: regulator-aud3v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-3v15";
+		regulator-min-microvolt = <3150000>;
+		regulator-max-microvolt = <3150000>;
+		regulator-boot-on;
+	};
+
+	reg_aud4v: regulator-aud4v {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply-4v2";
+		regulator-min-microvolt = <4325000>;
+		regulator-max-microvolt = <4325000>;
+		regulator-boot-on;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd1_vmmc>;
+		regulator-name = "SD1_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_sd3_vmmc>;
+		regulator-name = "SD3_WIFI";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+	soc-supply = <&sw1c_reg>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usbotg1 {
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	vmmc-supply = <&reg_sd3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_reg_sd3_vmmc: sd3vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg1_vbus: vbus1grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059
+		>;
+	};
+
+	pinctrl_usb_otg2_vbus: vbus2grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
+		>;
+	};
+
+	pinctrl_reg_lcd_3v3: reglcd3v3grp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
+		>;
+	};
+
+	pinctrl_reg_sd1_vmmc: sd1vmmcgrp {
+		fsl,pins = <
+			MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
+			MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x13059
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x17059
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x17059
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x17059
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170b9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130b9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170b9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170b9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170b9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD1_CMD__SD1_CMD	0x170f9
+			MX6SLL_PAD_SD1_CLK__SD1_CLK	0x130f9
+			MX6SLL_PAD_SD1_DATA0__SD1_DATA0	0x170f9
+			MX6SLL_PAD_SD1_DATA1__SD1_DATA1	0x170f9
+			MX6SLL_PAD_SD1_DATA2__SD1_DATA2	0x170f9
+			MX6SLL_PAD_SD1_DATA3__SD1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x17061
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x13061
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x17061
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x17061
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x17061
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x17061
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170a1
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130a1
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170a1
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170a1
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170a1
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170a1
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6SLL_PAD_SD3_CMD__SD3_CMD		0x170e9
+			MX6SLL_PAD_SD3_CLK__SD3_CLK		0x130f9
+			MX6SLL_PAD_SD3_DATA0__SD3_DATA0		0x170e9
+			MX6SLL_PAD_SD3_DATA1__SD3_DATA1		0x170e9
+			MX6SLL_PAD_SD3_DATA2__SD3_DATA2		0x170e9
+			MX6SLL_PAD_SD3_DATA3__SD3_DATA3		0x170e9
+			MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22	0x17059
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6SLL_PAD_I2C1_SCL__I2C1_SCL	 0x4001b8b1
+			MX6SLL_PAD_I2C1_SDA__I2C1_SDA	 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SLL_PAD_LCD_DATA00__LCD_DATA00	0x79
+			MX6SLL_PAD_LCD_DATA01__LCD_DATA01	0x79
+			MX6SLL_PAD_LCD_DATA02__LCD_DATA02	0x79
+			MX6SLL_PAD_LCD_DATA03__LCD_DATA03	0x79
+			MX6SLL_PAD_LCD_DATA04__LCD_DATA04	0x79
+			MX6SLL_PAD_LCD_DATA05__LCD_DATA05	0x79
+			MX6SLL_PAD_LCD_DATA06__LCD_DATA06	0x79
+			MX6SLL_PAD_LCD_DATA07__LCD_DATA07	0x79
+			MX6SLL_PAD_LCD_DATA08__LCD_DATA08	0x79
+			MX6SLL_PAD_LCD_DATA09__LCD_DATA09	0x79
+			MX6SLL_PAD_LCD_DATA10__LCD_DATA10	0x79
+			MX6SLL_PAD_LCD_DATA11__LCD_DATA11	0x79
+			MX6SLL_PAD_LCD_DATA12__LCD_DATA12	0x79
+			MX6SLL_PAD_LCD_DATA13__LCD_DATA13	0x79
+			MX6SLL_PAD_LCD_DATA14__LCD_DATA14	0x79
+			MX6SLL_PAD_LCD_DATA15__LCD_DATA15	0x79
+			MX6SLL_PAD_LCD_DATA16__LCD_DATA16	0x79
+			MX6SLL_PAD_LCD_DATA17__LCD_DATA17	0x79
+			MX6SLL_PAD_LCD_DATA18__LCD_DATA18	0x79
+			MX6SLL_PAD_LCD_DATA19__LCD_DATA19	0x79
+			MX6SLL_PAD_LCD_DATA20__LCD_DATA20	0x79
+			MX6SLL_PAD_LCD_DATA21__LCD_DATA21	0x79
+			MX6SLL_PAD_LCD_DATA22__LCD_DATA22	0x79
+			MX6SLL_PAD_LCD_DATA23__LCD_DATA23	0x79
+			MX6SLL_PAD_LCD_CLK__LCD_CLK		0x79
+			MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE	0x79
+			MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC		0x79
+			MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC		0x79
+			MX6SLL_PAD_LCD_RESET__LCD_RESET		0x79
+		>;
+	};
+
+	pinctrl_pwm1: pmw1grp {
+		fsl,pins = <
+			MX6SLL_PAD_PWM1__PWM1_OUT   0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h
new file mode 100644
index 0000000..713a346
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll-pinfunc.h
@@ -0,0 +1,880 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#ifndef __DTS_IMX6SLL_PINFUNC_H
+#define __DTS_IMX6SLL_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX6SLL_PAD_WDOG_B__WDOG1_B                                0x0014 0x02DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB                      0x0014 0x02DC 0x0000 0x1 0x0
+#define MX6SLL_PAD_WDOG_B__UART5_RI_B                             0x0014 0x02DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_WDOG_B__GPIO3_IO18                             0x0014 0x02DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M               0x0018 0x02E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL                          0x0018 0x02E0 0x068C 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT                          0x0018 0x02E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID                       0x0018 0x02E0 0x0560 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY                    0x0018 0x02E0 0x05AC 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21                        0x0018 0x02E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_24M__SD3_WP                            0x0018 0x02E0 0x0794 0x6 0x0
+#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K               0x001C 0x02E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA                          0x001C 0x02E4 0x0690 0x1 0x0
+#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT                          0x001C 0x02E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID                       0x001C 0x02E4 0x055C 0x3 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL                          0x001C 0x02E4 0x0000 0x4 0x0
+#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22                        0x001C 0x02E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B                          0x001C 0x02E4 0x0780 0x6 0x0
+#define MX6SLL_PAD_PWM1__PWM1_OUT                                 0x0020 0x02E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_PWM1__CCM_CLKO                                 0x0020 0x02E8 0x0000 0x1 0x0
+#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT                            0x0020 0x02E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_PWM1__CSI_MCLK                                 0x0020 0x02E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_PWM1__GPIO3_IO23                               0x0020 0x02E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_PWM1__EPIT1_OUT                                0x0020 0x02E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL0__KEY_COL0                             0x0024 0x02EC 0x06A0 0x0 0x0
+#define MX6SLL_PAD_KEY_COL0__I2C2_SCL                             0x0024 0x02EC 0x0684 0x1 0x0
+#define MX6SLL_PAD_KEY_COL0__LCD_DATA00                           0x0024 0x02EC 0x06D8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL0__SD1_CD_B                             0x0024 0x02EC 0x0770 0x4 0x1
+#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24                           0x0024 0x02EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0                             0x0028 0x02F0 0x06C0 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA                             0x0028 0x02F0 0x0688 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01                           0x0028 0x02F0 0x06DC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW0__SD1_WP                               0x0028 0x02F0 0x0774 0x4 0x1
+#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25                           0x0028 0x02F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL1__KEY_COL1                             0x002C 0x02F4 0x06A4 0x0 0x0
+#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI                          0x002C 0x02F4 0x0658 0x1 0x1
+#define MX6SLL_PAD_KEY_COL1__LCD_DATA02                           0x002C 0x02F4 0x06E0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL1__SD3_DATA4                            0x002C 0x02F4 0x0784 0x4 0x0
+#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26                           0x002C 0x02F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1                             0x0030 0x02F8 0x06C4 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO                          0x0030 0x02F8 0x0654 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03                           0x0030 0x02F8 0x06E4 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD                            0x0030 0x02F8 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5                            0x0030 0x02F8 0x0788 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27                           0x0030 0x02F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL2__KEY_COL2                             0x0034 0x02FC 0x06A8 0x0 0x0
+#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0                           0x0034 0x02FC 0x065C 0x1 0x1
+#define MX6SLL_PAD_KEY_COL2__LCD_DATA04                           0x0034 0x02FC 0x06E8 0x2 0x0
+#define MX6SLL_PAD_KEY_COL2__CSI_DATA12                           0x0034 0x02FC 0x05B8 0x3 0x1
+#define MX6SLL_PAD_KEY_COL2__SD3_DATA6                            0x0034 0x02FC 0x078C 0x4 0x0
+#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28                           0x0034 0x02FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2                             0x0038 0x0300 0x06C8 0x0 0x0
+#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK                          0x0038 0x0300 0x0650 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05                           0x0038 0x0300 0x06EC 0x2 0x0
+#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13                           0x0038 0x0300 0x05BC 0x3 0x1
+#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7                            0x0038 0x0300 0x0790 0x4 0x0
+#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29                           0x0038 0x0300 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__KEY_COL3                             0x003C 0x0304 0x06AC 0x0 0x0
+#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS                            0x003C 0x0304 0x05A0 0x1 0x1
+#define MX6SLL_PAD_KEY_COL3__LCD_DATA06                           0x003C 0x0304 0x06F0 0x2 0x0
+#define MX6SLL_PAD_KEY_COL3__CSI_DATA14                           0x003C 0x0304 0x05C0 0x3 0x1
+#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30                           0x003C 0x0304 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL3__SD1_RESET                            0x003C 0x0304 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3                             0x0040 0x0308 0x06CC 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC                             0x0040 0x0308 0x059C 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07                           0x0040 0x0308 0x06F4 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15                           0x0040 0x0308 0x05C4 0x3 0x2
+#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31                           0x0040 0x0308 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT                          0x0040 0x0308 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL4__KEY_COL4                             0x0044 0x030C 0x06B0 0x0 0x1
+#define MX6SLL_PAD_KEY_COL4__AUD6_RXD                             0x0044 0x030C 0x0594 0x1 0x1
+#define MX6SLL_PAD_KEY_COL4__LCD_DATA08                           0x0044 0x030C 0x06F8 0x2 0x1
+#define MX6SLL_PAD_KEY_COL4__CSI_DATA16                           0x0044 0x030C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00                           0x0044 0x030C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR                         0x0044 0x030C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4                             0x0048 0x0310 0x06D0 0x0 0x1
+#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC                             0x0048 0x0310 0x05A4 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09                           0x0048 0x0310 0x06FC 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17                           0x0048 0x0310 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01                           0x0048 0x0310 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC                          0x0048 0x0310 0x076C 0x6 0x2
+#define MX6SLL_PAD_KEY_COL5__KEY_COL5                             0x004C 0x0314 0x0694 0x0 0x1
+#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS                            0x004C 0x0314 0x05A8 0x1 0x1
+#define MX6SLL_PAD_KEY_COL5__LCD_DATA10                           0x004C 0x0314 0x0700 0x2 0x0
+#define MX6SLL_PAD_KEY_COL5__CSI_DATA18                           0x004C 0x0314 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02                           0x004C 0x0314 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR                         0x004C 0x0314 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5                             0x0050 0x0318 0x06B4 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD                             0x0050 0x0318 0x0598 0x1 0x1
+#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11                           0x0050 0x0318 0x0704 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19                           0x0050 0x0318 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03                           0x0050 0x0318 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC                          0x0050 0x0318 0x0768 0x6 0x3
+#define MX6SLL_PAD_KEY_COL6__KEY_COL6                             0x0054 0x031C 0x0698 0x0 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX                         0x0054 0x031C 0x075C 0x1 0x2
+#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX                         0x0054 0x031C 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL6__LCD_DATA12                           0x0054 0x031C 0x0708 0x2 0x1
+#define MX6SLL_PAD_KEY_COL6__CSI_DATA20                           0x0054 0x031C 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04                           0x0054 0x031C 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL6__SD3_RESET                            0x0054 0x031C 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6                             0x0058 0x0320 0x06B8 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX                         0x0058 0x0320 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX                         0x0058 0x0320 0x075C 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13                           0x0058 0x0320 0x070C 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21                           0x0058 0x0320 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05                           0x0058 0x0320 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT                          0x0058 0x0320 0x0000 0x6 0x0
+#define MX6SLL_PAD_KEY_COL7__KEY_COL7                             0x005C 0x0324 0x069C 0x0 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS                        0x005C 0x0324 0x0758 0x1 0x2
+#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS                        0x005C 0x0324 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_COL7__LCD_DATA14                           0x005C 0x0324 0x0710 0x2 0x1
+#define MX6SLL_PAD_KEY_COL7__CSI_DATA22                           0x005C 0x0324 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06                           0x005C 0x0324 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_COL7__SD1_WP                               0x005C 0x0324 0x0774 0x6 0x3
+#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7                             0x0060 0x0328 0x06BC 0x0 0x2
+#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS                        0x0060 0x0328 0x0000 0x1 0x0
+#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS                        0x0060 0x0328 0x0758 0x1 0x3
+#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15                           0x0060 0x0328 0x0714 0x2 0x1
+#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23                           0x0060 0x0328 0x0000 0x3 0x0
+#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07                           0x0060 0x0328 0x0000 0x5 0x0
+#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B                             0x0060 0x0328 0x0770 0x6 0x3
+#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00                       0x0064 0x032C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI                       0x0064 0x032C 0x0658 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24                        0x0064 0x032C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00                        0x0064 0x032C 0x05C8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07                        0x0064 0x032C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01                       0x0068 0x0330 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO                       0x0068 0x0330 0x0654 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25                        0x0068 0x0330 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01                        0x0068 0x0330 0x05CC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08                        0x0068 0x0330 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02                       0x006C 0x0334 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0                        0x006C 0x0334 0x065C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26                        0x006C 0x0334 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02                        0x006C 0x0334 0x05D0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09                        0x006C 0x0334 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03                       0x0070 0x0338 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK                       0x0070 0x0338 0x0650 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27                        0x0070 0x0338 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03                        0x0070 0x0338 0x05D4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10                        0x0070 0x0338 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04                       0x0074 0x033C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1                        0x0074 0x033C 0x0660 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28                        0x0074 0x033C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04                        0x0074 0x033C 0x05D8 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11                        0x0074 0x033C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05                       0x0078 0x0340 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2                        0x0078 0x0340 0x0664 0x1 0x1
+#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29                        0x0078 0x0340 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05                        0x0078 0x0340 0x05DC 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12                        0x0078 0x0340 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06                       0x007C 0x0344 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3                        0x007C 0x0344 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30                        0x007C 0x0344 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06                        0x007C 0x0344 0x05E0 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13                        0x007C 0x0344 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07                       0x0080 0x0348 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY                        0x0080 0x0348 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31                        0x0080 0x0348 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07                        0x0080 0x0348 0x05E4 0x3 0x2
+#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14                        0x0080 0x0348 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08                       0x0084 0x034C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI                       0x0084 0x034C 0x063C 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0                    0x0084 0x034C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15                        0x0084 0x034C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09                       0x0088 0x0350 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO                       0x0088 0x0350 0x0638 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1                    0x0088 0x0350 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16                        0x0088 0x0350 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10                       0x008C 0x0354 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0                        0x008C 0x0354 0x0648 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2                    0x008C 0x0354 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17                        0x008C 0x0354 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11                       0x0090 0x0358 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK                       0x0090 0x0358 0x0630 0x1 0x2
+#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3                    0x0090 0x0358 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18                        0x0090 0x0358 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12                       0x0094 0x035C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX                      0x0094 0x035C 0x074C 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX                      0x0094 0x035C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM                      0x0094 0x035C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19                        0x0094 0x035C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1                        0x0094 0x035C 0x064C 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13                       0x0098 0x0360 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX                      0x0098 0x0360 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX                      0x0098 0x0360 0x074C 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ                      0x0098 0x0360 0x0668 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20                        0x0098 0x0360 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2                        0x0098 0x0360 0x0640 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14                       0x009C 0x0364 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS                     0x009C 0x0364 0x0748 0x1 0x4
+#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS                     0x009C 0x0364 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT                     0x009C 0x0364 0x066C 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21                        0x009C 0x0364 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3                        0x009C 0x0364 0x0644 0x6 0x1
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15                       0x00A0 0x0368 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS                     0x00A0 0x0368 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS                     0x00A0 0x0368 0x0748 0x1 0x5
+#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE                     0x00A0 0x0368 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22                        0x00A0 0x0368 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY                        0x00A0 0x0368 0x0634 0x6 0x1
+#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P                       0x00A4 0x036C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI                        0x00A4 0x036C 0x0624 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL                           0x00A4 0x036C 0x0684 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08                         0x00A4 0x036C 0x05E8 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23                         0x00A4 0x036C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE                           0x00A8 0x0370 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO                         0x00A8 0x0370 0x0620 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA                            0x00A8 0x0370 0x0688 0x2 0x2
+#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09                          0x00A8 0x0370 0x05EC 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24                          0x00A8 0x0370 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE                           0x00AC 0x0374 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0                          0x00AC 0x0374 0x0628 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10                          0x00AC 0x0374 0x05B0 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25                          0x00AC 0x0374 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR                         0x00B0 0x0378 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK                        0x00B0 0x0378 0x061C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4                         0x00B0 0x0378 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11                         0x00B0 0x0378 0x05B4 0x3 0x2
+#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26                         0x00B0 0x0378 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0                         0x00B4 0x037C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1                         0x00B4 0x037C 0x062C 0x1 0x1
+#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT                           0x00B4 0x037C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27                         0x00B4 0x037C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1                         0x00B8 0x0380 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B                            0x00B8 0x0380 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT                           0x00B8 0x0380 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28                         0x00B8 0x0380 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2                         0x00BC 0x0384 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL                           0x00BC 0x0384 0x068C 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT                           0x00BC 0x0384 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29                         0x00BC 0x0384 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3                         0x00C0 0x0388 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA                           0x00C0 0x0388 0x0690 0x1 0x2
+#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT                           0x00C0 0x0388 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30                         0x00C0 0x0388 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK                         0x00C4 0x038C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2                         0x00C4 0x038C 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK                         0x00C4 0x038C 0x05F4 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31                         0x00C4 0x038C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET                          0x00C4 0x038C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE                           0x00C8 0x0390 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3                          0x00C8 0x0390 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC                           0x00C8 0x0390 0x05F0 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00                          0x00C8 0x0390 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT                         0x00C8 0x0390 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL                           0x00CC 0x0394 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY                          0x00CC 0x0394 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK                            0x00CC 0x0394 0x0000 0x3 0x0
+#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01                          0x00CC 0x0394 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDRL__SD2_WP                              0x00CC 0x0394 0x077C 0x6 0x2
+#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP                           0x00D0 0x0398 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT                            0x00D0 0x0398 0x0000 0x1 0x0
+#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC                           0x00D0 0x0398 0x05F8 0x3 0x2
+#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02                          0x00D0 0x0398 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B                            0x00D0 0x0398 0x0778 0x6 0x2
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0                         0x00D4 0x039C 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS                          0x00D4 0x039C 0x0588 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX                       0x00D4 0x039C 0x0754 0x2 0x4
+#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX                       0x00D4 0x039C 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03                         0x00D4 0x039C 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5                         0x00D4 0x039C 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1                         0x00D8 0x03A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD                           0x00D8 0x03A0 0x057C 0x1 0x1
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX                       0x00D8 0x03A0 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX                       0x00D8 0x03A0 0x0754 0x2 0x5
+#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04                         0x00D8 0x03A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6                         0x00D8 0x03A0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0                           0x00DC 0x03A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS                       0x00DC 0x03A4 0x0750 0x2 0x2
+#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS                       0x00DC 0x03A4 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05                          0x00DC 0x03A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7                          0x00DC 0x03A4 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1                           0x00E0 0x03A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS                       0x00E0 0x03A8 0x0000 0x2 0x0
+#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS                       0x00E0 0x03A8 0x0750 0x2 0x3
+#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06                          0x00E0 0x03A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8                          0x00E0 0x03A8 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0                 0x00E4 0x03AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC                       0x00E4 0x03AC 0x0584 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16                     0x00E4 0x03AC 0x0718 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07                     0x00E4 0x03AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1                 0x00E8 0x03B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS                      0x00E8 0x03B0 0x0590 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17                     0x00E8 0x03B0 0x071C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08                     0x00E8 0x03B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2                 0x00EC 0x03B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD                       0x00EC 0x03B4 0x0580 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18                     0x00EC 0x03B4 0x0720 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09                     0x00EC 0x03B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3                 0x00F0 0x03B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC                       0x00F0 0x03B8 0x058C 0x1 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19                     0x00F0 0x03B8 0x0724 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10                     0x00F0 0x03B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM                     0x00F4 0x03BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20                       0x00F4 0x03BC 0x0728 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID                      0x00F4 0x03BC 0x055C 0x4 0x4
+#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11                       0x00F4 0x03BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET                        0x00F4 0x03BC 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ                     0x00F8 0x03C0 0x0668 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21                       0x00F8 0x03C0 0x072C 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID                      0x00F8 0x03C0 0x0560 0x4 0x3
+#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12                       0x00F8 0x03C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT                      0x00F8 0x03C0 0x0000 0x6 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                   0x00FC 0x03C4 0x066C 0x0 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22                      0x00FC 0x03C4 0x0730 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI                      0x00FC 0x03C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13                      0x00FC 0x03C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP                          0x00FC 0x03C4 0x0794 0x6 0x2
+#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE                   0x0100 0x03C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23                      0x0100 0x03C8 0x0734 0x2 0x1
+#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO                      0x0100 0x03C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14                      0x0100 0x03C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B                        0x0100 0x03C8 0x0780 0x6 0x2
+#define MX6SLL_PAD_LCD_CLK__LCD_CLK                               0x0104 0x03CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN                            0x0104 0x03CC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_CLK__PWM4_OUT                              0x0104 0x03CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15                            0x0104 0x03CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE                         0x0108 0x03D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E                           0x0108 0x03D0 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX                       0x0108 0x03D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16                         0x0108 0x03D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC                           0x010C 0x03D4 0x06D4 0x0 0x0
+#define MX6SLL_PAD_LCD_HSYNC__LCD_CS                              0x010C 0x03D4 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX                        0x010C 0x03D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX                        0x010C 0x03D4 0x074C 0x4 0x1
+#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17                          0x010C 0x03D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK                       0x010C 0x03D4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC                           0x0110 0x03D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_VSYNC__LCD_RS                              0x0110 0x03D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS                       0x0110 0x03D8 0x0748 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS                       0x0110 0x03D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18                          0x0110 0x03D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL                       0x0110 0x03D8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_RESET                           0x0114 0x03DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_LCD_RESET__LCD_BUSY                            0x0114 0x03DC 0x06D4 0x2 0x1
+#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS                       0x0114 0x03DC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS                       0x0114 0x03DC 0x0748 0x4 0x1
+#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19                          0x0114 0x03DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY                      0x0114 0x03DC 0x05AC 0x6 0x2
+#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00                         0x0118 0x03E0 0x06D8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI                        0x0118 0x03E0 0x0608 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID                        0x0118 0x03E0 0x0560 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT                           0x0118 0x03E0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B                        0x0118 0x03E0 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20                         0x0118 0x03E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00                        0x0118 0x03E0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00                     0x0118 0x03E0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01                         0x011C 0x03E4 0x06DC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO                        0x011C 0x03E4 0x0604 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID                        0x011C 0x03E4 0x055C 0x2 0x3
+#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT                           0x011C 0x03E4 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS                          0x011C 0x03E4 0x0570 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21                         0x011C 0x03E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01                        0x011C 0x03E4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01                     0x011C 0x03E4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02                         0x0120 0x03E8 0x06E0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0                         0x0120 0x03E8 0x0614 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT                          0x0120 0x03E8 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT                           0x0120 0x03E8 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC                           0x0120 0x03E8 0x056C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22                         0x0120 0x03E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02                        0x0120 0x03E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02                     0x0120 0x03E8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03                         0x0124 0x03EC 0x06E4 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK                        0x0124 0x03EC 0x05FC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B                        0x0124 0x03EC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT                           0x0124 0x03EC 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD                           0x0124 0x03EC 0x0564 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23                         0x0124 0x03EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03                        0x0124 0x03EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03                     0x0124 0x03EC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04                         0x0128 0x03F0 0x06E8 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1                         0x0128 0x03F0 0x060C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC                          0x0128 0x03F0 0x05F8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB                  0x0128 0x03F0 0x0000 0x3 0x0
+#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC                           0x0128 0x03F0 0x0574 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24                         0x0128 0x03F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04                        0x0128 0x03F0 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04                     0x0128 0x03F0 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05                         0x012C 0x03F4 0x06EC 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2                         0x012C 0x03F4 0x0610 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC                          0x012C 0x03F4 0x05F0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS                          0x012C 0x03F4 0x0578 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25                         0x012C 0x03F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05                        0x012C 0x03F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05                     0x012C 0x03F4 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06                         0x0130 0x03F8 0x06F0 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3                         0x0130 0x03F8 0x0618 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK                         0x0130 0x03F8 0x05F4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD                           0x0130 0x03F8 0x0568 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26                         0x0130 0x03F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06                        0x0130 0x03F8 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06                     0x0130 0x03F8 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07                         0x0134 0x03FC 0x06F4 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY                         0x0134 0x03FC 0x0600 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK                           0x0134 0x03FC 0x0000 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT                      0x0134 0x03FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27                         0x0134 0x03FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07                        0x0134 0x03FC 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07                     0x0134 0x03FC 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08                         0x0138 0x0400 0x06F8 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA08__KEY_COL0                           0x0138 0x0400 0x06A0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09                         0x0138 0x0400 0x05EC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK                        0x0138 0x0400 0x061C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28                         0x0138 0x0400 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08                        0x0138 0x0400 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08                     0x0138 0x0400 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09                         0x013C 0x0404 0x06FC 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0                           0x013C 0x0404 0x06C0 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08                         0x013C 0x0404 0x05E8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI                        0x013C 0x0404 0x0624 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29                         0x013C 0x0404 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09                        0x013C 0x0404 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09                     0x013C 0x0404 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10                         0x0140 0x0408 0x0700 0x0 0x1
+#define MX6SLL_PAD_LCD_DATA10__KEY_COL1                           0x0140 0x0408 0x06A4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07                         0x0140 0x0408 0x05E4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO                        0x0140 0x0408 0x0620 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30                         0x0140 0x0408 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10                        0x0140 0x0408 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10                     0x0140 0x0408 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11                         0x0144 0x040C 0x0704 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1                           0x0144 0x040C 0x06C4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06                         0x0144 0x040C 0x05E0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1                         0x0144 0x040C 0x062C 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31                         0x0144 0x040C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11                        0x0144 0x040C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11                     0x0144 0x040C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12                         0x0148 0x0410 0x0708 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA12__KEY_COL2                           0x0148 0x0410 0x06A8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05                         0x0148 0x0410 0x05DC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS                      0x0148 0x0410 0x0760 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS                      0x0148 0x0410 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00                         0x0148 0x0410 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12                        0x0148 0x0410 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12                     0x0148 0x0410 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13                         0x014C 0x0414 0x070C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2                           0x014C 0x0414 0x06C8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04                         0x014C 0x0414 0x05D8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS                      0x014C 0x0414 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS                      0x014C 0x0414 0x0760 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01                         0x014C 0x0414 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13                        0x014C 0x0414 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13                     0x014C 0x0414 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14                         0x0150 0x0418 0x0710 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA14__KEY_COL3                           0x0150 0x0418 0x06AC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03                         0x0150 0x0418 0x05D4 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX                       0x0150 0x0418 0x0764 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX                       0x0150 0x0418 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02                         0x0150 0x0418 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14                        0x0150 0x0418 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14                     0x0150 0x0418 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15                         0x0154 0x041C 0x0714 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3                           0x0154 0x041C 0x06CC 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02                         0x0154 0x041C 0x05D0 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX                       0x0154 0x041C 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX                       0x0154 0x041C 0x0764 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03                         0x0154 0x041C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15                        0x0154 0x041C 0x0000 0x6 0x0
+#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15                     0x0154 0x041C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16                         0x0158 0x0420 0x0718 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA16__KEY_COL4                           0x0158 0x0420 0x06B0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01                         0x0158 0x0420 0x05CC 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL                           0x0158 0x0420 0x0684 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04                         0x0158 0x0420 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24                     0x0158 0x0420 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17                         0x015C 0x0424 0x071C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4                           0x015C 0x0424 0x06D0 0x1 0x0
+#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00                         0x015C 0x0424 0x05C8 0x2 0x0
+#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA                           0x015C 0x0424 0x0688 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05                         0x015C 0x0424 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25                     0x015C 0x0424 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18                         0x0160 0x0428 0x0720 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA18__KEY_COL5                           0x0160 0x0428 0x0694 0x1 0x2
+#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15                         0x0160 0x0428 0x05C4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1                       0x0160 0x0428 0x0670 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06                         0x0160 0x0428 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26                     0x0160 0x0428 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19                         0x0164 0x042C 0x0724 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5                           0x0164 0x042C 0x06B4 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14                         0x0164 0x042C 0x05C0 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2                       0x0164 0x042C 0x0674 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07                         0x0164 0x042C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27                     0x0164 0x042C 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20                         0x0168 0x0430 0x0728 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA20__KEY_COL6                           0x0168 0x0430 0x0698 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13                         0x0168 0x0430 0x05BC 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1                       0x0168 0x0430 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08                         0x0168 0x0430 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28                     0x0168 0x0430 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21                         0x016C 0x0434 0x072C 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6                           0x016C 0x0434 0x06B8 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12                         0x016C 0x0434 0x05B8 0x2 0x2
+#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2                       0x016C 0x0434 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09                         0x016C 0x0434 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29                     0x016C 0x0434 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22                         0x0170 0x0438 0x0730 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA22__KEY_COL7                           0x0170 0x0438 0x069C 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11                         0x0170 0x0438 0x05B4 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3                       0x0170 0x0438 0x0000 0x4 0x0
+#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10                         0x0170 0x0438 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30                     0x0170 0x0438 0x0000 0x7 0x0
+#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23                         0x0174 0x043C 0x0734 0x0 0x0
+#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7                           0x0174 0x043C 0x06BC 0x1 0x1
+#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10                         0x0174 0x043C 0x05B0 0x2 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN                          0x0174 0x043C 0x0678 0x4 0x1
+#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11                         0x0174 0x043C 0x0000 0x5 0x0
+#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31                     0x0174 0x043C 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS                            0x0178 0x0440 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL                             0x0178 0x0440 0x067C 0x1 0x1
+#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX                         0x0178 0x0440 0x0754 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX                         0x0178 0x0440 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL                             0x0178 0x0440 0x068C 0x4 0x1
+#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00                           0x0178 0x0440 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0                           0x0178 0x0440 0x0648 0x6 0x0
+#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND                           0x0178 0x0440 0x0000 0x7 0x0
+#define MX6SLL_PAD_AUD_RXC__AUD3_RXC                              0x017C 0x0444 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXC__I2C1_SDA                              0x017C 0x0444 0x0680 0x1 0x1
+#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX                          0x017C 0x0444 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX                          0x017C 0x0444 0x0754 0x2 0x1
+#define MX6SLL_PAD_AUD_RXC__I2C3_SDA                              0x017C 0x0444 0x0690 0x4 0x1
+#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01                            0x017C 0x0444 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1                            0x017C 0x0444 0x064C 0x6 0x0
+#define MX6SLL_PAD_AUD_RXD__AUD3_RXD                              0x0180 0x0448 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI                           0x0180 0x0448 0x063C 0x1 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX                          0x0180 0x0448 0x075C 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX                          0x0180 0x0448 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_RXD__SD1_LCTL                              0x0180 0x0448 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02                            0x0180 0x0448 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXC__AUD3_TXC                              0x0184 0x044C 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO                           0x0184 0x044C 0x0638 0x1 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX                          0x0184 0x044C 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX                          0x0184 0x044C 0x075C 0x2 0x1
+#define MX6SLL_PAD_AUD_TXC__SD2_LCTL                              0x0184 0x044C 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03                            0x0184 0x044C 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS                            0x0188 0x0450 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT                             0x0188 0x0450 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS                        0x0188 0x0450 0x0758 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS                        0x0188 0x0450 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL                             0x0188 0x0450 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04                           0x0188 0x0450 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_TXD__AUD3_TXD                              0x018C 0x0454 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK                           0x018C 0x0454 0x0630 0x1 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS                         0x018C 0x0454 0x0000 0x2 0x0
+#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS                         0x018C 0x0454 0x0758 0x2 0x1
+#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05                            0x018C 0x0454 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT                        0x0190 0x0458 0x0000 0x0 0x0
+#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT                             0x0190 0x0458 0x0000 0x1 0x0
+#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY                           0x0190 0x0458 0x0634 0x2 0x0
+#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB                    0x0190 0x0458 0x0000 0x4 0x0
+#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06                           0x0190 0x0458 0x0000 0x5 0x0
+#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK                        0x0190 0x0458 0x073C 0x6 0x1
+#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX                        0x0194 0x045C 0x0744 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX                        0x0194 0x045C 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_RXD__PWM1_OUT                            0x0194 0x045C 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX                        0x0194 0x045C 0x075C 0x2 0x4
+#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX                        0x0194 0x045C 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX                        0x0194 0x045C 0x0764 0x4 0x6
+#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX                        0x0194 0x045C 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16                          0x0194 0x045C 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX                        0x0198 0x0460 0x0000 0x0 0x0
+#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX                        0x0198 0x0460 0x0744 0x0 0x1
+#define MX6SLL_PAD_UART1_TXD__PWM2_OUT                            0x0198 0x0460 0x0000 0x1 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX                        0x0198 0x0460 0x0000 0x2 0x0
+#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX                        0x0198 0x0460 0x075C 0x2 0x5
+#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX                        0x0198 0x0460 0x0000 0x4 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX                        0x0198 0x0460 0x0764 0x4 0x7
+#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17                          0x0198 0x0460 0x0000 0x5 0x0
+#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B                         0x0198 0x0460 0x0000 0x7 0x0
+#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL                             0x019C 0x0464 0x067C 0x0 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS                        0x019C 0x0464 0x0740 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS                        0x019C 0x0464 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2                           0x019C 0x0464 0x0640 0x2 0x0
+#define MX6SLL_PAD_I2C1_SCL__SD3_RESET                            0x019C 0x0464 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12                           0x019C 0x0464 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1                           0x019C 0x0464 0x060C 0x6 0x0
+#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA                             0x01A0 0x0468 0x0680 0x0 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS                        0x01A0 0x0468 0x0000 0x1 0x0
+#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS                        0x01A0 0x0468 0x0740 0x1 0x1
+#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3                           0x01A0 0x0468 0x0644 0x2 0x0
+#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT                          0x01A0 0x0468 0x0000 0x4 0x0
+#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13                           0x01A0 0x0468 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2                           0x01A0 0x0468 0x0610 0x6 0x0
+#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL                             0x01A4 0x046C 0x0684 0x0 0x3
+#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS                            0x01A4 0x046C 0x0570 0x1 0x2
+#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN                             0x01A4 0x046C 0x0738 0x2 0x2
+#define MX6SLL_PAD_I2C2_SCL__SD3_WP                               0x01A4 0x046C 0x0794 0x4 0x3
+#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14                           0x01A4 0x046C 0x0000 0x5 0x0
+#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY                           0x01A4 0x046C 0x0600 0x6 0x1
+#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA                             0x01A8 0x0470 0x0688 0x0 0x3
+#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC                             0x01A8 0x0470 0x056C 0x1 0x2
+#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT                            0x01A8 0x0470 0x0000 0x2 0x0
+#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B                             0x01A8 0x0470 0x0780 0x4 0x3
+#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15                           0x01A8 0x0470 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK                       0x01AC 0x0474 0x05FC 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD                          0x01AC 0x0474 0x0568 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX                      0x01AC 0x0474 0x0764 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX                      0x01AC 0x0474 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0                        0x01AC 0x0474 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET                         0x01AC 0x0474 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08                        0x01AC 0x0474 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC                       0x01AC 0x0474 0x0768 0x6 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI                       0x01B0 0x0478 0x0608 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC                          0x01B0 0x0478 0x0574 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX                      0x01B0 0x0478 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX                      0x01B0 0x0478 0x0764 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1                        0x01B0 0x0478 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT                       0x01B0 0x0478 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09                        0x01B0 0x0478 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO                       0x01B4 0x047C 0x0604 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS                         0x01B4 0x047C 0x0578 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS                     0x01B4 0x047C 0x0760 0x2 0x2
+#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS                     0x01B4 0x047C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0                         0x01B4 0x047C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP                            0x01B4 0x047C 0x077C 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10                        0x01B4 0x047C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0                         0x01B8 0x0480 0x0614 0x0 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD                           0x01B8 0x0480 0x0564 0x1 0x1
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS                      0x01B8 0x0480 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS                      0x01B8 0x0480 0x0760 0x2 0x3
+#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1                          0x01B8 0x0480 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B                           0x01B8 0x0480 0x0778 0x4 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11                         0x01B8 0x0480 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR                       0x01B8 0x0480 0x0000 0x6 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK                       0x01BC 0x0484 0x061C 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK                     0x01BC 0x0484 0x073C 0x1 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX                      0x01BC 0x0484 0x0754 0x2 0x2
+#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX                      0x01BC 0x0484 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK                        0x01BC 0x0484 0x05F4 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET                         0x01BC 0x0484 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12                        0x01BC 0x0484 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC                       0x01BC 0x0484 0x0768 0x6 0x2
+#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI                       0x01C0 0x0488 0x0624 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1                   0x01C0 0x0488 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX                      0x01C0 0x0488 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX                      0x01C0 0x0488 0x0754 0x2 0x3
+#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC                         0x01C0 0x0488 0x05F0 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT                       0x01C0 0x0488 0x0000 0x4 0x0
+#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13                        0x01C0 0x0488 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO                       0x01C4 0x048C 0x0620 0x0 0x1
+#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0                   0x01C4 0x048C 0x0000 0x1 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS                     0x01C4 0x048C 0x0750 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS                     0x01C4 0x048C 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK                          0x01C4 0x048C 0x0000 0x3 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP                            0x01C4 0x048C 0x0774 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14                        0x01C4 0x048C 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC                       0x01C4 0x048C 0x076C 0x6 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0                         0x01C8 0x0490 0x0628 0x0 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3                         0x01C8 0x0490 0x0618 0x1 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS                      0x01C8 0x0490 0x0000 0x2 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS                      0x01C8 0x0490 0x0750 0x2 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC                          0x01C8 0x0490 0x05F8 0x3 0x1
+#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B                           0x01C8 0x0490 0x0770 0x4 0x2
+#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15                         0x01C8 0x0490 0x0000 0x5 0x0
+#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR                       0x01C8 0x0490 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD1_CLK__SD1_CLK                               0x01CC 0x0494 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CLK__KEY_COL0                              0x01CC 0x0494 0x06A0 0x2 0x2
+#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4                            0x01CC 0x0494 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15                            0x01CC 0x0494 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_CMD__SD1_CMD                               0x01D0 0x0498 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_CMD__KEY_ROW0                              0x01D0 0x0498 0x06C0 0x2 0x2
+#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5                            0x01D0 0x0498 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14                            0x01D0 0x0498 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0                           0x01D4 0x049C 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA0__KEY_COL1                            0x01D4 0x049C 0x06A4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6                          0x01D4 0x049C 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11                          0x01D4 0x049C 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1                           0x01D8 0x04A0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1                            0x01D8 0x04A0 0x06C4 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7                          0x01D8 0x04A0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08                          0x01D8 0x04A0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2                           0x01DC 0x04A4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA2__KEY_COL2                            0x01DC 0x04A4 0x06A8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8                          0x01DC 0x04A4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13                          0x01DC 0x04A4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3                           0x01E0 0x04A8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2                            0x01E0 0x04A8 0x06C8 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9                          0x01E0 0x04A8 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06                          0x01E0 0x04A8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4                           0x01E4 0x04AC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA4__KEY_COL3                            0x01E4 0x04AC 0x06AC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N                        0x01E4 0x04AC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX                        0x01E4 0x04AC 0x075C 0x4 0x6
+#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX                        0x01E4 0x04AC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12                          0x01E4 0x04AC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5                           0x01E8 0x04B0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3                            0x01E8 0x04B0 0x06CC 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED                          0x01E8 0x04B0 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX                        0x01E8 0x04B0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX                        0x01E8 0x04B0 0x075C 0x4 0x7
+#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09                          0x01E8 0x04B0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6                           0x01EC 0x04B4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA6__KEY_COL4                            0x01EC 0x04B4 0x06B0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ                          0x01EC 0x04B4 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS                       0x01EC 0x04B4 0x0758 0x4 0x4
+#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS                       0x01EC 0x04B4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07                          0x01EC 0x04B4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7                           0x01F0 0x04B8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4                            0x01F0 0x04B8 0x06D0 0x2 0x2
+#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY                      0x01F0 0x04B8 0x05AC 0x3 0x3
+#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS                       0x01F0 0x04B8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS                       0x01F0 0x04B8 0x0758 0x4 0x5
+#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10                          0x01F0 0x04B8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_RESET__SD2_RESET                           0x01F4 0x04BC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_RESET__WDOG2_B                             0x01F4 0x04BC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT                           0x01F4 0x04BC 0x0000 0x3 0x0
+#define MX6SLL_PAD_SD2_RESET__CSI_MCLK                            0x01F4 0x04BC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27                          0x01F4 0x04BC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CLK__SD2_CLK                               0x01F8 0x04C0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS                             0x01F8 0x04C0 0x0570 0x1 0x1
+#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK                           0x01F8 0x04C0 0x0630 0x2 0x1
+#define MX6SLL_PAD_SD2_CLK__CSI_DATA00                            0x01F8 0x04C0 0x05C8 0x3 0x1
+#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05                            0x01F8 0x04C0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_CMD__SD2_CMD                               0x01FC 0x04C4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_CMD__AUD4_RXC                              0x01FC 0x04C4 0x056C 0x1 0x1
+#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0                            0x01FC 0x04C4 0x0648 0x2 0x1
+#define MX6SLL_PAD_SD2_CMD__CSI_DATA01                            0x01FC 0x04C4 0x05CC 0x3 0x1
+#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT                             0x01FC 0x04C4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04                            0x01FC 0x04C4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0                           0x0200 0x04C8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD                            0x0200 0x04C8 0x0564 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI                         0x0200 0x04C8 0x063C 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02                          0x0200 0x04C8 0x05D0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS                       0x0200 0x04C8 0x0760 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS                       0x0200 0x04C8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01                          0x0200 0x04C8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1                           0x0204 0x04CC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC                            0x0204 0x04CC 0x0574 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO                         0x0204 0x04CC 0x0638 0x2 0x1
+#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03                          0x0204 0x04CC 0x05D4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS                       0x0204 0x04CC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS                       0x0204 0x04CC 0x0760 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30                          0x0204 0x04CC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2                           0x0208 0x04D0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS                           0x0208 0x04D0 0x0578 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04                          0x0208 0x04D0 0x05D8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX                        0x0208 0x04D0 0x0764 0x4 0x4
+#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX                        0x0208 0x04D0 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03                          0x0208 0x04D0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3                           0x020C 0x04D4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD                            0x020C 0x04D4 0x0568 0x1 0x2
+#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05                          0x020C 0x04D4 0x05DC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX                        0x020C 0x04D4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX                        0x020C 0x04D4 0x0764 0x4 0x5
+#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28                          0x020C 0x04D4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4                           0x0210 0x04D8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4                           0x0210 0x04D8 0x0784 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX                        0x0210 0x04D8 0x074C 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX                        0x0210 0x04D8 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06                          0x0210 0x04D8 0x05E0 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT                           0x0210 0x04D8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02                          0x0210 0x04D8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5                           0x0214 0x04DC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5                           0x0214 0x04DC 0x0788 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX                        0x0214 0x04DC 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX                        0x0214 0x04DC 0x074C 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07                          0x0214 0x04DC 0x05E4 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN                            0x0214 0x04DC 0x0738 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31                          0x0214 0x04DC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6                           0x0218 0x04E0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6                           0x0218 0x04E0 0x078C 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS                       0x0218 0x04E0 0x0748 0x2 0x2
+#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS                       0x0218 0x04E0 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08                          0x0218 0x04E0 0x05E8 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA6__SD2_WP                              0x0218 0x04E0 0x077C 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29                          0x0218 0x04E0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7                           0x021C 0x04E4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7                           0x021C 0x04E4 0x0790 0x1 0x1
+#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS                       0x021C 0x04E4 0x0000 0x2 0x0
+#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS                       0x021C 0x04E4 0x0748 0x2 0x3
+#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09                          0x021C 0x04E4 0x05EC 0x3 0x1
+#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B                            0x021C 0x04E4 0x0778 0x4 0x1
+#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00                          0x021C 0x04E4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__SD3_CLK                               0x0220 0x04E8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS                             0x0220 0x04E8 0x0588 0x1 0x0
+#define MX6SLL_PAD_SD3_CLK__KEY_COL5                              0x0220 0x04E8 0x0694 0x2 0x0
+#define MX6SLL_PAD_SD3_CLK__CSI_DATA10                            0x0220 0x04E8 0x05B0 0x3 0x0
+#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB                     0x0220 0x04E8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18                            0x0220 0x04E8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR                          0x0220 0x04E8 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_CMD__SD3_CMD                               0x0224 0x04EC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_CMD__AUD5_RXC                              0x0224 0x04EC 0x0584 0x1 0x0
+#define MX6SLL_PAD_SD3_CMD__KEY_ROW5                              0x0224 0x04EC 0x06B4 0x2 0x0
+#define MX6SLL_PAD_SD3_CMD__CSI_DATA11                            0x0224 0x04EC 0x05B4 0x3 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID                           0x0224 0x04EC 0x0560 0x4 0x1
+#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21                            0x0224 0x04EC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR                          0x0224 0x04EC 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0                           0x0228 0x04F0 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD                            0x0228 0x04F0 0x057C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA0__KEY_COL6                            0x0228 0x04F0 0x0698 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12                          0x0228 0x04F0 0x05B8 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID                         0x0228 0x04F0 0x055C 0x4 0x1
+#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19                          0x0228 0x04F0 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1                           0x022C 0x04F4 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC                            0x022C 0x04F4 0x058C 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6                            0x022C 0x04F4 0x06B8 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13                          0x022C 0x04F4 0x05BC 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT                         0x022C 0x04F4 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20                          0x022C 0x04F4 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B                           0x022C 0x04F4 0x0000 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2                           0x0230 0x04F8 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS                           0x0230 0x04F8 0x0590 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA2__KEY_COL7                            0x0230 0x04F8 0x069C 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14                          0x0230 0x04F8 0x05C0 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT                           0x0230 0x04F8 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16                          0x0230 0x04F8 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC                         0x0230 0x04F8 0x0768 0x6 0x0
+#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3                           0x0234 0x04FC 0x0000 0x0 0x0
+#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD                            0x0234 0x04FC 0x0580 0x1 0x0
+#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7                            0x0234 0x04FC 0x06BC 0x2 0x0
+#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15                          0x0234 0x04FC 0x05C4 0x3 0x0
+#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT                           0x0234 0x04FC 0x0000 0x4 0x0
+#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17                          0x0234 0x04FC 0x0000 0x5 0x0
+#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC                         0x0234 0x04FC 0x076C 0x6 0x0
+#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE                         0x0238 0x0500 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS                          0x0238 0x0500 0x05A0 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0                         0x0238 0x0500 0x065C 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1                       0x0238 0x0500 0x0670 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20                         0x0238 0x0500 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE                         0x023C 0x0504 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC                           0x023C 0x0504 0x059C 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK                        0x023C 0x0504 0x0650 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2                       0x023C 0x0504 0x0674 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21                         0x023C 0x0504 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE                         0x0240 0x0508 0x0000 0x0 0x0
+#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD                           0x0240 0x0508 0x0594 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI                        0x0240 0x0508 0x0658 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1                       0x0240 0x0508 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19                         0x0240 0x0508 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC                           0x0244 0x050C 0x05A4 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO                        0x0244 0x050C 0x0654 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2                       0x0244 0x050C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25                         0x0244 0x050C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS                          0x0248 0x0510 0x05A8 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1                         0x0248 0x0510 0x0660 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3                       0x0248 0x0510 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18                         0x0248 0x0510 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD                           0x024C 0x0514 0x0598 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2                         0x024C 0x0514 0x0664 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN                          0x024C 0x0514 0x0678 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24                         0x024C 0x0514 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT                      0x0250 0x0518 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET                          0x0250 0x0518 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET                          0x0250 0x0518 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23                         0x0250 0x0518 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID                        0x0254 0x051C 0x055C 0x2 0x2
+#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT                        0x0254 0x051C 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT                        0x0254 0x051C 0x0000 0x4 0x0
+#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17                         0x0254 0x051C 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN                           0x0258 0x0520 0x0738 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD1_WP                             0x0258 0x0520 0x0774 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO22__SD3_WP                             0x0258 0x0520 0x0794 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22                         0x0258 0x0520 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT                          0x025C 0x0524 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B                           0x025C 0x0524 0x0770 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B                           0x025C 0x0524 0x0780 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16                         0x025C 0x0524 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B                            0x0260 0x0528 0x0000 0x2 0x0
+#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT                           0x0260 0x0528 0x0000 0x3 0x0
+#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY                     0x0260 0x0528 0x05AC 0x4 0x1
+#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26                         0x0260 0x0528 0x0000 0x5 0x0
+#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK                      0x0260 0x0528 0x073C 0x6 0x0
+
+#endif /* __DTS_IMX6SLL_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
new file mode 100644
index 0000000..000e613
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -0,0 +1,780 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP.
+ *
+ */
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx6sll-pinfunc.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi3 = &ecspi3;
+		spi4 = &ecspi4;
+		usbphy0 = &usbphy1;
+		usbphy1 = &usbphy2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1275000
+				792000  1175000
+				396000  1075000
+				198000	975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz      SOC-PU uV */
+				996000          1175000
+				792000          1175000
+				396000          1175000
+				198000		1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX6SLL_CLK_ARM>,
+				 <&clks IMX6SLL_CLK_PLL2_PFD2>,
+				 <&clks IMX6SLL_CLK_STEP>,
+				 <&clks IMX6SLL_CLK_PLL1_SW>,
+				 <&clks IMX6SLL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+		};
+	};
+
+	intc: interrupt-controller@a01000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00a01000 0x1000>,
+		      <0x00a00100 0x100>;
+		interrupt-parent = <&intc>;
+	};
+
+	ckil: clock-ckil {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	ipp_di0: clock-ipp-di0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di0";
+	};
+
+	ipp_di1: clock-ipp-di1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "ipp_di1";
+	};
+
+	tempmon: temperature-sensor {
+		compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gpc>;
+		fsl,tempmon = <&anatop>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
+		clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gpc>;
+		ranges;
+
+		ocram: sram@900000 {
+			compatible = "mmio-sram";
+			reg = <0x00900000 0x20000>;
+		};
+
+		L2: l2-cache@a02000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a02000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			arm,tag-latency = <4 2 3>;
+			arm,data-latency = <4 2 3>;
+		};
+
+		aips1: aips-bus@2000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02000000 0x100000>;
+			ranges;
+
+			spba: spba-bus@2000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x02000000 0x40000>;
+				ranges;
+
+				spdif: spdif@2004000 {
+					compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
+					reg = <0x02004000 0x4000>;
+					interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
+						 <&clks IMX6SLL_CLK_OSC>,
+						 <&clks IMX6SLL_CLK_SPDIF>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_IPG>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_DUMMY>,
+						 <&clks IMX6SLL_CLK_SPBA>;
+					clock-names = "core", "rxtx0",
+						      "rxtx1", "rxtx2",
+						      "rxtx3", "rxtx4",
+						      "rxtx5", "rxtx6",
+						      "rxtx7", "dma";
+					status = "disabled";
+				};
+
+				ecspi1: spi@2008000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02008000 0x4000>;
+					interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI1>,
+						 <&clks IMX6SLL_CLK_ECSPI1>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi2: spi@200c000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x0200c000 0x4000>;
+					interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI2>,
+						 <&clks IMX6SLL_CLK_ECSPI2>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi3: spi@2010000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02010000 0x4000>;
+					interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI3>,
+						 <&clks IMX6SLL_CLK_ECSPI3>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi4: spi@2014000 {
+					compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
+					reg = <0x02014000 0x4000>;
+					interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_ECSPI4>,
+						 <&clks IMX6SLL_CLK_ECSPI4>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart4: serial@2018000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02018000 0x4000>;
+					interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
+						 <&clks IMX6SLL_CLK_UART4_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart1: serial@2020000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02020000 0x4000>;
+					interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+						 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				uart2: serial@2024000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02024000 0x4000>;
+					interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
+					dma-names = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
+						 <&clks IMX6SLL_CLK_UART2_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi1: ssi-controller@2028000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02028000 0x4000>;
+					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
+						 <&clks IMX6SLL_CLK_SSI1>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi2: ssi-controller@202c000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x0202c000 0x4000>;
+					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
+						 <&clks IMX6SLL_CLK_SSI2>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				ssi3: ssi-controller@2030000 {
+					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
+					reg = <0x02030000 0x4000>;
+					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
+					dma-names = "rx", "tx";
+					fsl,fifo-depth = <15>;
+					clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
+						 <&clks IMX6SLL_CLK_SSI3>;
+					clock-names = "ipg", "baud";
+					status = "disabled";
+				};
+
+				uart3: serial@2034000 {
+					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
+						     "fsl,imx21-uart";
+					reg = <0x02034000 0x4000>;
+					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
+					dma-name = "rx", "tx";
+					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
+						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+			};
+
+			pwm1: pwm@2080000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02080000 0x4000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM1>,
+					 <&clks IMX6SLL_CLK_PWM1>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm2: pwm@2084000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02084000 0x4000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM2>,
+					 <&clks IMX6SLL_CLK_PWM2>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm3: pwm@2088000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x02088000 0x4000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM3>,
+					 <&clks IMX6SLL_CLK_PWM3>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			pwm4: pwm@208c000 {
+				compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
+				reg = <0x0208c000 0x4000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_PWM4>,
+					 <&clks IMX6SLL_CLK_PWM4>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+			};
+
+			gpt1: timer@2098000 {
+				compatible = "fsl,imx6sl-gpt";
+				reg = <0x02098000 0x4000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
+					 <&clks IMX6SLL_CLK_GPT_SERIAL>;
+				clock-names = "ipg", "per";
+			};
+
+			gpio1: gpio@209c000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x0209c000 0x4000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@20a0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a0000 0x4000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@20a4000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a4000 0x4000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@20a8000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020a8000 0x4000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@20ac000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020ac000 0x4000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@20b0000 {
+				compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
+				reg = <0x020b0000 0x4000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			kpp: keypad@20b8000 {
+				compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
+				reg = <0x020b8000 0x4000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_KPP>;
+				status = "disabled";
+			};
+
+			wdog1: watchdog@20bc000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020bc000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG1>;
+			};
+
+			wdog2: watchdog@20c0000 {
+				compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
+				reg = <0x020c0000 0x4000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_WDOG2>;
+				status = "disabled";
+			};
+
+			clks: clock-controller@20c4000 {
+				compatible = "fsl,imx6sll-ccm";
+				reg = <0x020c4000 0x4000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+				clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+
+				assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
+				assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
+			};
+
+			anatop: anatop@20c8000 {
+				compatible = "fsl,imx6sll-anatop",
+					     "fsl,imx6q-anatop",
+					     "syscon", "simple-bus";
+				reg = <0x020c8000 0x4000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reg_3p0: regulator-3p0@20c8120 {
+					compatible = "fsl,anatop-regulator";
+					reg = <0x20c8120>;
+					regulator-name = "vdd3p0";
+					regulator-min-microvolt = <2625000>;
+					regulator-max-microvolt = <3400000>;
+					anatop-reg-offset = <0x120>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <0>;
+					anatop-min-voltage = <2625000>;
+					anatop-max-voltage = <3400000>;
+					anatop-enable-bit = <0>;
+				};
+			};
+
+			usbphy1: usb-phy@20c9000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020c9000 0x1000>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY1>;
+				phy-3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			usbphy2: usb-phy@20ca000 {
+				compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
+						"fsl,imx23-usbphy";
+				reg = <0x020ca000 0x1000>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBPHY2>;
+				phy-reg_3p0-supply = <&reg_3p0>;
+				fsl,anatop = <&anatop>;
+			};
+
+			snvs: snvs@20cc000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x020cc000 0x4000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x61>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			src: reset-controller@20d8000 {
+				compatible = "fsl,imx6sll-src", "fsl,imx51-src";
+				reg = <0x020d8000 0x4000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: interrupt-controller@20dc000 {
+				compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
+				reg = <0x020dc000 0x4000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&intc>;
+				fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>;
+			};
+
+			iomuxc: pinctrl@20e0000 {
+				compatible = "fsl,imx6sll-iomuxc";
+				reg = <0x020e0000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@20e4000 {
+				compatible = "fsl,imx6sll-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
+				reg = <0x020e4000 0x4000>;
+			};
+
+			csi: csi@20e8000 {
+				compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
+				reg = <0x020e8000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DUMMY>,
+					 <&clks IMX6SLL_CLK_CSI>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "disp-axi", "csi_mclk", "disp_dcic";
+				status = "disabled";
+			};
+
+			sdma: dma-controller@20ec000 {
+				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				reg = <0x020ec000 0x4000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_SDMA>,
+					 <&clks IMX6SLL_CLK_SDMA>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				iram = <&ocram>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
+			};
+
+			lcdif: lcd-controller@20f8000 {
+				compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
+				reg = <0x020f8000 0x4000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
+					 <&clks IMX6SLL_CLK_LCDIF_APB>,
+					 <&clks IMX6SLL_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+
+			dcp: dcp@20fc000 {
+				compatible = "fsl,imx28-dcp";
+				reg = <0x020fc000 0x4000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_DCP>;
+				clock-names = "dcp";
+			};
+		};
+
+		aips2: aips-bus@2100000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x02100000 0x100000>;
+			ranges;
+
+			usbotg1: usb@2184000 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,anatop = <&anatop>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbotg2: usb@2184200 {
+				compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
+						"fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USBOH3>;
+				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
+				ahb-burst-config = <0x0>;
+				tx-burst-size-dword = <0x10>;
+				rx-burst-size-dword = <0x10>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@2184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
+						"fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+			};
+
+			usdhc1: mmc@2190000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02190000 0x4000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>,
+					 <&clks IMX6SLL_CLK_USDHC1>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@2194000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02194000 0x4000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>,
+					 <&clks IMX6SLL_CLK_USDHC2>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@2198000 {
+				compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
+				reg = <0x02198000 0x4000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>,
+					 <&clks IMX6SLL_CLK_USDHC3>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				fsl,tuning-step = <2>;
+				fsl,tuning-start-tap = <20>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@21a0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a0000 0x4000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C1>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@21a4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a4000 0x4000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C2>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@21a8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
+				reg = <0x021a8000 0x4000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6SLL_CLK_I2C3>;
+				status = "disabled";
+			};
+
+			mmdc: memory-controller@21b0000 {
+				compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
+				reg = <0x021b0000 0x4000>;
+			};
+
+			ocotp: ocotp-ctrl@21bc000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,imx6sll-ocotp", "syscon";
+				reg = <0x021bc000 0x4000>;
+				clocks = <&clks IMX6SLL_CLK_OCOTP>;
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
+			};
+
+			audmux: audmux@21d8000 {
+				compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
+				reg = <0x021d8000 0x4000>;
+				status = "disabled";
+			};
+
+			uart5: serial@21f4000 {
+				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
+					     "fsl,imx21-uart";
+				reg = <0x021f4000 0x4000>;
+				interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
+				dma-names = "rx", "tx";
+				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
+					 <&clks IMX6SLL_CLK_UART5_SERIAL>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 59e52f5..adb5cc7 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -1,42 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright (C) 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -47,11 +11,6 @@
 	model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board";
 	compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx";
 
-	aliases {
-		fb-lcd = &lcdif1;
-		t-lcd = &t_lcd;
-	};
-
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -261,38 +220,6 @@
 	status = "okay";
 };
 
-&lcdif1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif1>;
-	lcd-supply = <&reg_3p3v>;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <16>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&t_lcd>;
-			t_lcd: t_lcd_default {
-				clock-frequency = <74160000>;
-				hactive = <1280>;
-				vactive = <720>;
-				hback-porch = <220>;
-				hfront-porch = <110>;
-				vback-porch = <20>;
-				vfront-porch = <5>;
-				hsync-len = <40>;
-				vsync-len = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
-
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -524,40 +451,6 @@
 		>;
 	};
 
-	pinctrl_lcdif1: lcdif1grp {
-		fsl,pins = <
-			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
-			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE	0x4001b0b0
-			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC	0x4001b0b0
-			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC	0x4001b0b0
-			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22	0x4001b0b0
-			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23	0x4001b0b0
-		>;
-	};
-
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			MX6SX_PAD_NAND_DATA05__GPIO4_IO_9	0xb0b0
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index e3533e7..9cc6ff2 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -63,6 +63,7 @@
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 4e4a55a..844caa3 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -79,6 +79,7 @@
 				198000	    1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6SX_CLK_ARM>,
 				 <&clks IMX6SX_CLK_PLL2_PFD2>,
 				 <&clks IMX6SX_CLK_STEP>,
@@ -165,6 +166,12 @@
 		interrupt-parent = <&gpc>;
 		ranges;
 
+		ocram_s: sram@8f8000 {
+			compatible = "mmio-sram";
+			reg = <0x008f8000 0x4000>;
+			clocks = <&clks IMX6SX_CLK_OCRAM_S>;
+		};
+
 		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
@@ -591,8 +598,8 @@
 				regulator-1p1 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd1p1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1375000>;
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x110>;
 					anatop-vol-bit-shift = <8>;
@@ -621,8 +628,8 @@
 				regulator-2p5 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "vdd2p5";
-					regulator-min-microvolt = <2100000>;
-					regulator-max-microvolt = <2875000>;
+					regulator-min-microvolt = <2250000>;
+					regulator-max-microvolt = <2750000>;
 					regulator-always-on;
 					anatop-reg-offset = <0x130>;
 					anatop-vol-bit-shift = <8>;
@@ -814,7 +821,6 @@
 
 			crypto: caam@2100000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <4>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
new file mode 100644
index 0000000..3792679
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Express board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+	model = "Digi International ConnectCore 6UL SBC Express.";
+	compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom",
+		     "fsl,imx6ul";
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&ext_3v3>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_master>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			smsc,disable-energy-detect;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	broken-cd;      /* no carrier detect line (use polling) */
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			/* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04        0xb0
+		>;
+	};
+
+	pinctrl_ecspi3_master: ecspi3grp1 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_ecspi3_slave: ecspi3grp2 {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0	0x10b0 /* Chip Select */
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x40017051
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX	0x1b020
+			MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__PWM1_OUT		0x10b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__UART4_DCE_TX		0x1b0b1
+			MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__USDHC2_CMD		0x17059
+			MX6UL_PAD_CSI_VSYNC__USDHC2_CLK		0x10071
+			MX6UL_PAD_CSI_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_CSI_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_CSI_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_CSI_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	/* General purpose pinctrl */
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIOs BANK 3 */
+			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0xf030
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
new file mode 100644
index 0000000..c71a84d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore 6UL System-On-Module device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x4000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&vdda_adc_3v3>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pfuze3000: pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			int_3v3: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_arm_soc_in: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-ramp-delay = <6250>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <925000>;
+				};
+			};
+
+			ext_3v3: sw2 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <6250>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr3: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1300000>;
+				};
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vdd_snvs_3v3: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdda_adc_3v3: vldo1 {
+				compatible = "regulator-fixed";
+				regulator-name = "vref-adc-3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo2_ext: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vdda_wlan: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_high_in: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_int: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4_ext: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vcoin_chg: vcoin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0xb0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0xb0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0xb0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0xb0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0xb0b1
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0xb0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0xb0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0xb0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0xb0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0xb0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0xb0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0xb0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0xb0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0xb0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0xb0b1
+			>;
+		};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_arm_soc_in>;
+	regulator-allow-bypass;
+};
diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
index 47682b8..0c09420f 100644
--- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts
@@ -51,8 +51,9 @@
 	model = "Technexion Pico i.MX6UL Board";
 	compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul";
 
+	/* Will be filled by the bootloader */
 	memory@80000000 {
-		reg = <0x80000000 0x10000000>;
+		reg = <0x80000000 0>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 47a3453..6dc0b56 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -62,6 +62,7 @@
 			device_type = "cpu";
 			reg = <0>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			operating-points = <
 				/* kHz	uV */
 				696000	1275000
@@ -433,6 +434,7 @@
 				reg = <0x0209c000 0x4000>;
 				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO1>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -446,6 +448,7 @@
 				reg = <0x020a0000 0x4000>;
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO2>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -458,6 +461,7 @@
 				reg = <0x020a4000 0x4000>;
 				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO3>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -470,6 +474,7 @@
 				reg = <0x020a8000 0x4000>;
 				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -482,6 +487,7 @@
 				reg = <0x020ac000 0x4000>;
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_GPIO5>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 3dffbcd..183193e 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -20,20 +20,6 @@
 
 &cpu0 {
 	clock-frequency = <792000000>;
-	operating-points = <
-		/* kHz	uV */
-		792000  1225000
-		528000	1175000
-		396000	1025000
-		198000	950000
-	>;
-	fsl,soc-operating-points = <
-		/* KHz	uV */
-		792000  1175000
-		528000	1175000
-		396000	1175000
-		198000	1175000
-	>;
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index ebc25c9..cd1776a 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -1,43 +1,6 @@
-/*
- * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2016 Freescale Semiconductor, Inc.
 
 #include "imx6ul.dtsi"
 #include "imx6ull-pinfunc.h"
@@ -48,6 +11,25 @@
 /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */
 /delete-node/ &crypto;
 
+&cpu0 {
+	operating-points = <
+		/* kHz	uV */
+		900000	1275000
+		792000	1225000
+		528000	1175000
+		396000	1025000
+		198000	950000
+	>;
+	fsl,soc-operating-points = <
+		/* KHz	uV */
+		900000	1175000
+		792000	1175000
+		528000	1175000
+		396000	1175000
+		198000	1175000
+	>;
+};
+
 / {
 	soc {
 		aips3: aips-bus@2200000 {
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 70c53e5..d8aac4a 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2016 Boundary Devices, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -48,11 +11,6 @@
 	model = "Boundary Devices i.MX7 Nitrogen7 Board";
 	compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d";
 
-	aliases {
-		fb-lcd = &lcdif;
-		t-lcd = &t_lcd;
-	};
-
 	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
@@ -65,7 +23,7 @@
 		default-on;
 	};
 
-	backlight-j20 {
+	backlight_lcd: backlight-j20 {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -73,6 +31,17 @@
 		status = "okay";
 	};
 
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg1_vbus";
@@ -317,35 +286,11 @@
 };
 
 &lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	lcd-supply = <&reg_vref_3v3>;
-	display = <&display0>;
 	status = "okay";
 
-	display0: lcd-display {
-		bits-per-pixel = <16>;
-		bus-width = <18>;
-
-		display-timings {
-			native-mode = <&t_lcd>;
-			t_lcd: t_lcd_default {
-				/* default to Okaya display */
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <40>;
-				hsync-len = <48>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <3>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 9408491..c9b3c60 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -10,6 +10,10 @@
 	model = "Freescale i.MX7 SabreSD Board";
 	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
 
+	chosen {
+		stdout-path = &uart1;
+	};
+
 	memory@80000000 {
 		reg = <0x80000000 0x80000000>;
 	};
@@ -71,14 +75,6 @@
 		enable-active-high;
 	};
 
-	reg_can2_3v3: regulator-can2-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can2-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
-	};
-
 	reg_vref_1v8: regulator-vref-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vref-1v8";
@@ -116,10 +112,17 @@
 		gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
 	panel {
 		compatible = "innolux,at043tn24";
-		pinctrl-0 = <&pinctrl_backlight>;
-		enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
 		power-supply = <&reg_lcd_3v3>;
 
 		port {
@@ -712,6 +715,12 @@
 	};
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
 &iomuxc_lpsr {
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
@@ -719,9 +728,9 @@
 		>;
 	};
 
-	pinctrl_backlight: backlightgrp {
+	pinctrl_pwm1: pwm1grp {
 		fsl,pins = <
-			MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1		0x110b0
+			MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT		0x30
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 8d3d123..7cbc2ff 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -11,6 +11,7 @@
 		cpu0: cpu@0 {
 			clock-frequency = <996000000>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 9ced589..a052198 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -842,7 +842,6 @@
 
 			crypto: caam@30900000 {
 				compatible = "fsl,sec-v4.0";
-				fsl,sec-era = <8>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x30900000 0x40000>;
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 66954aa..5cae74e 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
index 476273b..0e99df2 100644
--- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZ-G1M/N Daughter Board Camera Module
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 / {
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index a17311c..1db17ec 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -225,3 +225,23 @@
 		};
 	};
 };
+
+sa_subsys: subsys@24080000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+	ranges = <0 0x24080000 0x40000>;
+
+	sa_config: subsys@0 {
+		compatible = "syscon";
+		reg = <0x0 0x100>;
+	};
+
+	rng@24000 {
+		compatible = "ti,keystone-rng";
+		reg = <0x24000 0x1000>;
+		ti,syscon-sa-cfg = <&sa_config>;
+		clocks = <&clksa>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 154fdd7..b7f10bf 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -37,6 +37,14 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
+
+	vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 };
 
 &k2g_pinctrl {
@@ -128,6 +136,30 @@
 			K2G_CORE_IOPAD(0x1228) (BUFFER_CLASS_B | PIN_PULLDOWN  | MUX_MODE1)	/* qspicsn3.dcan1rx */
 		>;
 	};
+
+	emac_pins: pinmux_emac_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
+			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
+			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
+			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
+			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
+			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
+			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
+			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
+			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
+			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
+			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
+			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
+			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
+		>;
+	};
 };
 
 &uart0 {
@@ -144,6 +176,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&vcc3v3_dcin_reg>;
+	vqmmc-supply = <&vcc3v3_dcin_reg>;
 	cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -152,6 +185,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+	vqmmc-supply = <&vcc1v8_ldo1_reg>;
 	ti,non-removable;
 	status = "okay";
 };
@@ -294,3 +328,32 @@
 	pinctrl-0 = <&dcan1_pins>;
 	status = "okay";
 };
+
+&qmss {
+	status = "okay";
+};
+
+&knav_dmas {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&netcp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index d820ed2..2a2d38c 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -7,6 +7,7 @@
 /dts-v1/;
 
 #include "keystone-k2g.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
 
 / {
 	compatible = "ti,k2g-ice", "ti,k2g", "ti,keystone";
@@ -281,6 +282,30 @@
 			K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3)	/* spi2_scsn1.gpio0_102 */
 		>;
 	};
+
+	emac_pins: pinmux_emac_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x113C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD1.RGMII_RXD1 */
+			K2G_CORE_IOPAD(0x1138) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD2.RGMII_RXD2 */
+			K2G_CORE_IOPAD(0x1134) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD3.RGMII_RXD3 */
+			K2G_CORE_IOPAD(0x1140) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXD0.RGMII_RXD0 */
+			K2G_CORE_IOPAD(0x1178) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD0.RGMII_TXD0 */
+			K2G_CORE_IOPAD(0x1174) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD1.RGMII_TXD1 */
+			K2G_CORE_IOPAD(0x1170) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD2.RGMII_TXD2 */
+			K2G_CORE_IOPAD(0x116C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXD3.RGMII_TXD3 */
+			K2G_CORE_IOPAD(0x1154) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXCLK.RGMII_TXC */
+			K2G_CORE_IOPAD(0x117C) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_TXEN.RGMII_TXCTL */
+			K2G_CORE_IOPAD(0x1120) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXCLK.RGMII_RXC */
+			K2G_CORE_IOPAD(0x1144) (BUFFER_CLASS_D | PULL_DISABLE | MUX_MODE1)	/* MII_RXDV.RGMII_RXCTL */
+		>;
+	};
+
+	mdio_pins: pinmux_mdio_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x118C) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_CLK.MDIO_CLK */
+			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
+		>;
+	};
 };
 
 &uart0 {
@@ -386,3 +411,37 @@
 		vcc-supply = <&vdd_3v3>;
 	};
 };
+
+&qmss {
+	status = "okay";
+};
+
+&knav_dmas {
+	status = "okay";
+};
+
+&netcp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&gbe0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
new file mode 100644
index 0000000..d0e6a9a
--- /dev/null
+++ b/arch/arm/boot/dts/keystone-k2g-netcp.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for K2G Netcp driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+qmss: qmss@4020000 {
+	compatible = "ti,66ak2g-navss-qm";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	power-domains = <&k2g_pds 0x0018>;
+	clocks = <&k2g_clks 0x0018 0>;
+	clock-names = "nss_vclk";
+	ranges;
+	queue-range = <0 0x80>;
+	linkram0 = <0x4020000 0x7ff>;
+	status = "disabled";
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x80>;
+			reg = <0x4100000 0x800>,
+			      <0x4040000 0x100>,
+			      <0x4080000 0x800>,
+			      <0x40c0000 0x800>;
+			reg-names = "peek", "config",
+				    "region", "push";
+		};
+
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <77 8>;
+				interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04
+					     0 311 0xf04 0 312 0xf04 0 313 0xf04
+					     0 314 0xf04 0 315 0xf04>;
+				qalloc-by-id;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <112 8>;
+			};
+			netcp-tx {
+				qrange = <5 8>;
+				qalloc-by-id;
+			};
+		};
+	};
+
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <1023 128>; /* num_desc desc_size */
+			link-index = <0x400>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "disabled";
+	power-domains = <&k2g_pds 0x0018>;
+	clocks = <&k2g_clks 0x0018 0>;
+	clock-names = "nss_vclk";
+	ranges;
+	ti,navigator-cloud-address = <0x40c0000 0x40c0000 0x40c0000 0x40c0000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x4010000 0x100>,
+		      <0x4011000 0x2a0>, /* 21 Tx channels */
+		      <0x4012000 0x400>, /* 32 Rx channels */
+		      <0x4010100 0x80>,
+		      <0x4013000 0x400>; /* 32 Rx flows */
+		reg-names = "global", "txchan", "rxchan",
+			    "txsched", "rxflow";
+	};
+
+};
+
+netcp: netcp@4000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "disabled";
+	power-domains = <&k2g_pds 0x0018>;
+	clocks = <&k2g_clks 0x0018 3>, <&k2g_clks 0x0018 8>;
+	clock-names = "ethss_clk", "cpts";
+
+	/* NetCP address range */
+	ranges = <0 0x4000000 0x1000000>;
+
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>, <&dma_gbe 5>;
+	ti,navigator-dma-names = "netrx0", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe: gbe@200000 {
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-2";
+			reg = <0x200000 0x20>, <0x220000 0x20000>;
+			enable-ale;
+			tx-queue = <5>;
+			tx-channel = "nettx";
+			cpts-rftclk-sel = <0>;
+			cpts-ext-ts-inputs = <8>;
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <5>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <512 12>;
+			tx-pool = <511 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <77>;
+			tx-completion-queue = <78>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index da78c00..738b44c 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -391,13 +391,10 @@
 		};
 
 		mmc0: mmc@23000000 {
-			compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+			compatible = "ti,k2g-sdhci";
 			reg = <0x23000000 0x400>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
-			dmas = <&edma1 24 0>, <&edma1 25 0>;
-			dma-names = "tx", "rx";
 			bus-width = <4>;
-			ti,needs-special-reset;
 			no-1-8-v;
 			max-frequency = <96000000>;
 			power-domains = <&k2g_pds 0xb>;
@@ -407,13 +404,12 @@
 		};
 
 		mmc1: mmc@23100000 {
-			compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+			compatible = "ti,k2g-sdhci";
 			reg = <0x23100000 0x400>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
-			dmas = <&edma1 26 0>, <&edma1 27 0>;
-			dma-names = "tx", "rx";
 			bus-width = <8>;
-			ti,needs-special-reset;
+			no-1-8-v;
+			non-removable;
 			max-frequency = <96000000>;
 			power-domains = <&k2g_pds 0xc>;
 			clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
@@ -609,5 +605,18 @@
 			reg = <0x21010000 0x200>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
 		};
+
+		mdio: mdio@4200f00 {
+			compatible = "ti,keystone_mdio", "ti,davinci_mdio";
+			reg = <0x04200f00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k2g_clks 0x0018 3>;
+			clock-names = "fck";
+			power-domains = <&k2g_pds 0x0018>;
+			status = "disabled";
+			bus_freq = <2500000>;
+		};
+		#include "keystone-k2g-netcp.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index b88c068..e203145 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -228,3 +228,23 @@
 		};
 	};
 };
+
+sa_subsys: subsys@20c0000 {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x20c0000 0x40000>;
+
+	sa_config: subsys@0 {
+		compatible = "syscon";
+		reg = <0x0 0x100>;
+	};
+
+	rng@24000 {
+		compatible = "ti,keystone-rng";
+		reg = <0x24000 0x1000>;
+		ti,syscon-sa-cfg = <&sa_config>;
+		clocks = <&clksa>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index 9ec8422..a2e47ba 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -208,3 +208,23 @@
 		};
 	};
 };
+
+sa_subsys: subsys@26080000 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "simple-bus";
+	ranges = <0 0x26080000 0x40000>;
+
+	sa_config: subsys@0 {
+		compatible = "syscon";
+		reg = <0x0 0x100>;
+	};
+
+	rng@24000 {
+		compatible = "ti,keystone-rng";
+		reg = <0x24000 0x1000>;
+		ti,syscon-sa-cfg = <&sa_config>;
+		clocks = <&clksa>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 3bb28c0..ac34333 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -142,7 +142,7 @@
 		compatible = "ti,wl1273";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 2 */
 		ref-clock-frequency = <26000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 234afd6..9d5d53f 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -48,7 +48,7 @@
 		compatible = "ti,wl1283";
 		reg = <2>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		interrupts = <24 IRQ_TYPE_EDGE_RISING>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479..f184905 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -84,6 +84,7 @@
 			device_type = "cpu";
 			reg = <0xf01>;
 			clocks = <&clockgen 1 0>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d1eb123..1cdc346 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -92,6 +92,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			clock-frequency = <1300000000>;
 		};
 
@@ -103,6 +104,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			clock-frequency = <1300000000>;
 		};
 
@@ -114,6 +116,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			clock-frequency = <1300000000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 531d905..2b760f9 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -91,19 +91,19 @@
 
 		blue {
 			label = "bpi-r2:pio:blue";
-			gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 240 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		green {
 			label = "bpi-r2:pio:green";
-			gpios = <&pio 240 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 241 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		red {
 			label = "bpi-r2:pio:red";
-			gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 239 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
deleted file mode 100644
index 96ff3c9..0000000
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *
- */
-
-/dts-v1/;
-#include "mt7623n-rfb.dtsi"
-
-/ {
-	model = "MediaTek MT7623N NAND reference board";
-	compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
-};
-
-&bch {
-	status = "okay";
-};
-
-&nandc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_pins_default>;
-
-	nand@0 {
-		reg = <0>;
-		spare_per_sector = <64>;
-		nand-ecc-mode = "hw";
-		nand-ecc-strength = <12>;
-		nand-ecc-step-size = <1024>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "preloader";
-				reg = <0x0 0x40000>;
-			};
-
-			partition@40000 {
-				label = "uboot";
-				reg = <0x40000 0x80000>;
-			};
-
-			partition@c0000 {
-				label = "uboot-env";
-				reg = <0xC0000 0x40000>;
-			};
-
-			partition@140000 {
-				label = "bootimg";
-				reg = <0x140000 0x2000000>;
-			};
-
-			partition@2140000 {
-				label = "recovery";
-				reg = <0x2140000 0x2000000>;
-			};
-
-			partition@4140000 {
-				label = "rootfs";
-				reg = <0x4140000 0x1000000>;
-			};
-
-			partition@5140000 {
-				label = "usrdata";
-				reg = <0x5140000 0x1000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
deleted file mode 100644
index 5c5cc7d..0000000
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: John Crispin <john@phrozen.org>
- *	   Sean Wang <sean.wang@mediatek.com>
- *
- */
-
-/dts-v1/;
-#include "mt7623.dtsi"
-#include "mt6323.dtsi"
-
-/ {
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	cpus {
-		cpu0 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu1 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu2 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-
-		cpu3 {
-			proc-supply = <&mt6323_vproc_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0 0x80000000 0 0x40000000>;
-	};
-
-	usb_p1_vbus: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&mmc0 {
-	vmmc-supply = <&mt6323_vemc3v3_reg>;
-	vqmmc-supply = <&mt6323_vio18_reg>;
-};
-
-&mmc1 {
-	vmmc-supply = <&mt6323_vmch_reg>;
-	vqmmc-supply = <&mt6323_vmc_reg>;
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&usb1 {
-	vbus-supply = <&usb_p1_vbus>;
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts
index 4994e33..632f52e 100644
--- a/arch/arm/boot/dts/omap3-cm-t3517.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3517.dts
@@ -141,7 +141,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 145 */
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 145 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 8c63ac5..6e944df 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -81,7 +81,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index ee64191..4c1227d 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -133,7 +133,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 149 */
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 149 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
index 321c2b7..285681d 100644
--- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
+++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
@@ -49,6 +49,6 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; /* gpio 177 */
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* gpio 177 */
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
index 76dc088..1adc73b 100644
--- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
+++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts
@@ -71,6 +71,6 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; /* gpio 136 */
+		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 96d0301..aac27a4 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -202,7 +202,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 162 */
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>; /* gpio 162 */
 		ref-clock-frequency = <26000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e7c3c56..12d6822 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -128,6 +128,8 @@
 			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
 			linux,code = <KEY_VOLUMEDOWN>;
 			linux,can-disable;
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
 		};
 
 		slider {
@@ -136,7 +138,8 @@
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_KEYPAD_SLIDE>;
 			linux,can-disable;
-
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
 		};
 	};
 
@@ -369,7 +372,7 @@
 		compatible = "ti,wl1285", "ti,wl1283";
 		reg = <2>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
+		interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index a9a584b..cfcac0d 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -36,6 +36,8 @@
 			label = "button0";
 			linux,code = <BTN_0>;
 			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
 			wakeup-source;
 		};
 	};
@@ -140,7 +142,7 @@
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;	/* gpio_44 */
 
 		phy-mode = "mii";
 
diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi
index eb123b2..5e81691 100644
--- a/arch/arm/boot/dts/omap4-duovero.dtsi
+++ b/arch/arm/boot/dts/omap4-duovero.dtsi
@@ -248,6 +248,7 @@
 	ti,bus-width = <4>;
 	ti,non-removable;
 	cap-power-off-card;
+	keep-power-in-suspend;
 };
 
 &twl_usb_comparator {
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
new file mode 100644
index 0000000..6eb26b8
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -0,0 +1,2444 @@
+// SPDX-License-Identifier: GPL-2.0
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,omap4-l4-cfg", "simple-bus";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x080000>,	/* segment 0 */
+		 <0x00080000 0x4a080000 0x080000>,	/* segment 1 */
+		 <0x00100000 0x4a100000 0x080000>,	/* segment 2 */
+		 <0x00180000 0x4a180000 0x080000>,	/* segment 3 */
+		 <0x00200000 0x4a200000 0x080000>,	/* segment 4 */
+		 <0x00280000 0x4a280000 0x080000>,	/* segment 5 */
+		 <0x00300000 0x4a300000 0x080000>;	/* segment 6 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 3 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 5 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 6 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 7 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 8 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 9 */
+			 <0x00058000 0x00058000 0x004000>,	/* ap 10 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 11 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 12 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 23 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 24 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 25 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 26 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 80 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 81 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 86 */
+			 <0x00065000 0x00065000 0x001000>;	/* ap 87 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_core";
+			reg = <0x2000 0x4>,
+			      <0x2010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			omap4_scm_core: scm@0 {
+				compatible = "ti,omap4-scm-core", "simple-bus";
+				reg = <0x0 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+				};
+
+				omap_control_usb2phy: control-phy@300 {
+					compatible = "ti,control-phy-usb2";
+					reg = <0x300 0x4>;
+					reg-names = "power";
+				};
+
+				omap_control_usbotg: control-phy@33c {
+					compatible = "ti,control-phy-otghs";
+					reg = <0x33c 0x4>;
+					reg-names = "otghs_control";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x4a004000, ap 5 02.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			cm1: cm1@0 {
+				compatible = "ti,omap4-cm1", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm1_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm1_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 23 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm2: cm2@0 {
+				compatible = "ti,omap4-cm2", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				cm2_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm2_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 7 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "dma_system";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l3_dma_clkdm */
+			clocks = <&l3_dma_clkctrl OMAP4_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@58000 {			/* 0x4a058000, ap 10 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "hsi";
+			reg = <0x58000 0x4>,
+			      <0x58010 0x4>,
+			      <0x58014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x4000>;
+
+			hsi: hsi@0 {
+				compatible = "ti,omap4-hsi";
+				reg = <0x0 0x4000>,
+				      <0x4a05c000 0x1000>;
+				reg-names = "sys", "gdd";
+
+				clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
+				clock-names = "hsi_fck";
+
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gdd_mpu";
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x4000>;
+
+				hsi_port1: hsi-port@2000 {
+					compatible = "ti,omap4-hsi-port";
+					reg = <0x2000 0x800>,
+					      <0x2800 0x800>;
+					reg-names = "tx", "rx";
+					interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				hsi_port2: hsi-port@3000 {
+					compatible = "ti,omap4-hsi-port";
+					reg = <0x3000 0x800>,
+					      <0x3800 0x800>;
+					reg-names = "tx", "rx";
+					interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 80 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@62000 {			/* 0x4a062000, ap 11 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "usb_tll_hs";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>,
+			      <0x62014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_TLL_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			usbhstll: usbhstll@0 {
+				compatible = "ti,usbhs-tll";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@64000 {			/* 0x4a064000, ap 86 1e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "usb_host_hs";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>,
+			      <0x64014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_HOST_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			usbhshost: usbhshost@0 {
+				compatible = "ti,usbhs-host";
+				reg = <0x0 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				clocks = <&init_60m_fclk>,
+					 <&xclk60mhsp1_ck>,
+					 <&xclk60mhsp2_ck>;
+				clock-names = "refclk_60m_int",
+					      "refclk_60m_ext_p1",
+					      "refclk_60m_ext_p2";
+
+				usbhsohci: ohci@800 {
+					compatible = "ti,ohci-omap3";
+					reg = <0x800 0x400>;
+					interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+					remote-wakeup-connected;
+				};
+
+				usbhsehci: ehci@c00 {
+					compatible = "ti,ehci-omap";
+					reg = <0xc00 0x400>;
+					interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+
+		target-module@66000 {			/* 0x4a066000, ap 25 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "mmu_dsp";
+			reg = <0x66000 0x4>,
+			      <0x66010 0x4>,
+			      <0x66014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): iva, tesla_pwrdm, tesla_clkdm */
+			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			/* mmu_dsp cannot be moved before reset driver */
+			status = "disabled";
+		};
+	};
+
+	segment@80000 {					/* 0x4a080000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00059000 0x000d9000 0x001000>,	/* ap 13 */
+			 <0x0005a000 0x000da000 0x001000>,	/* ap 14 */
+			 <0x0005b000 0x000db000 0x001000>,	/* ap 15 */
+			 <0x0005c000 0x000dc000 0x001000>,	/* ap 16 */
+			 <0x0005d000 0x000dd000 0x001000>,	/* ap 17 */
+			 <0x0005e000 0x000de000 0x001000>,	/* ap 18 */
+			 <0x00060000 0x000e0000 0x001000>,	/* ap 19 */
+			 <0x00061000 0x000e1000 0x001000>,	/* ap 20 */
+			 <0x00074000 0x000f4000 0x001000>,	/* ap 27 */
+			 <0x00075000 0x000f5000 0x001000>,	/* ap 28 */
+			 <0x00076000 0x000f6000 0x001000>,	/* ap 29 */
+			 <0x00077000 0x000f7000 0x001000>,	/* ap 30 */
+			 <0x00036000 0x000b6000 0x001000>,	/* ap 69 */
+			 <0x00037000 0x000b7000 0x001000>,	/* ap 70 */
+			 <0x0004d000 0x000cd000 0x001000>,	/* ap 78 */
+			 <0x0004e000 0x000ce000 0x001000>,	/* ap 79 */
+			 <0x00029000 0x000a9000 0x001000>,	/* ap 82 */
+			 <0x0002a000 0x000aa000 0x001000>,	/* ap 83 */
+			 <0x0002b000 0x000ab000 0x001000>,	/* ap 84 */
+			 <0x0002c000 0x000ac000 0x001000>,	/* ap 85 */
+			 <0x0002d000 0x000ad000 0x001000>,	/* ap 88 */
+			 <0x0002e000 0x000ae000 0x001000>;	/* ap 89 */
+
+		target-module@29000 {			/* 0x4a0a9000, ap 82 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x29000 0x1000>;
+		};
+
+		target-module@2b000 {			/* 0x4a0ab000, ap 84 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x2b400 0x4>,
+			      <0x2b404 0x4>,
+			      <0x2b408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2b000 0x1000>;
+
+			usb_otg_hs: usb_otg_hs@0 {
+				compatible = "ti,omap4-musb";
+				reg = <0x0 0x7ff>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "mc", "dma";
+				usb-phy = <&usb2_phy>;
+				phys = <&usb2_phy>;
+				phy-names = "usb2-phy";
+				multipoint = <1>;
+				num-eps = <16>;
+				ram-bits = <12>;
+				ctrl-module = <&omap_control_usbotg>;
+			};
+		};
+
+		target-module@2d000 {			/* 0x4a0ad000, ap 88 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "ocp2scp_usb_phy";
+			reg = <0x2d000 0x4>,
+			      <0x2d010 0x4>,
+			      <0x2d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_OCP2SCP_USB_PHY_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2d000 0x1000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				reg = <0x0 0x1f>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				usb2_phy: usb2phy@80 {
+					compatible = "ti,omap-usb2";
+					reg = <0x80 0x58>;
+					ctrl-module = <&omap_control_usb2phy>;
+					clocks = <&usb_phy_cm_clk32k>;
+					clock-names = "wkupclk";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		target-module@36000 {			/* 0x4a0b6000, ap 69 60.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@4d000 {			/* 0x4a0cd000, ap 78 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4d000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a0d9000, ap 13 1a.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_mpu";
+			reg = <0x59038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			smartreflex_mpu: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-mpu";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4a0db000, ap 15 08.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_iva";
+			reg = <0x5b038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			smartreflex_iva: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-iva";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4a0dd000, ap 17 22.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x5d038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, always_on_core_pwrdm, l4_ao_clkdm */
+			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			smartreflex_core: smartreflex@0 {
+				compatible = "ti,omap4-smartreflex-core";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@60000 {			/* 0x4a0e0000, ap 19 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+		};
+
+		target-module@74000 {			/* 0x4a0f4000, ap 27 24.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mailbox";
+			reg = <0x74000 0x4>,
+			      <0x74010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			clocks = <&l4_cfg_clkctrl OMAP4_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				mbox_ipu: mbox_ipu {
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <1 0 0>;
+				};
+				mbox_dsp: mbox_dsp {
+					ti,mbox-tx = <3 0 0>;
+					ti,mbox-rx = <2 0 0>;
+				};
+			};
+		};
+
+		target-module@76000 {			/* 0x4a0f6000, ap 29 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "spinlock";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>,
+			      <0x76014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			clocks = <&l4_cfg_clkctrl OMAP4_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x001000>,	/* ap 21 */
+			 <0x00001000 0x00101000 0x001000>,	/* ap 22 */
+			 <0x00002000 0x00102000 0x001000>,	/* ap 61 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 62 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 63 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 64 */
+			 <0x0000a000 0x0010a000 0x001000>,	/* ap 65 */
+			 <0x0000b000 0x0010b000 0x001000>;	/* ap 66 */
+
+		target-module@0 {			/* 0x4a100000, ap 21 2a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_pad_core";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, core_pwrdm, l4_cfg_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			omap4_pmx_core: pinmux@40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <0x40 0x0196>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+
+			omap4_padconf_global: omap4_padconf_global@5a0 {
+				compatible = "syscon",
+					     "simple-bus";
+				reg = <0x5a0 0x170>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x5a0 0x170>;
+
+				pbias_regulator: pbias_regulator@60 {
+					compatible = "ti,pbias-omap4", "ti,pbias-omap";
+					reg = <0x60 0x4>;
+					syscon = <&omap4_padconf_global>;
+					pbias_mmc_reg: pbias_mmc_omap4 {
+						regulator-name = "pbias_mmc_omap4";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3000000>;
+					};
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x4a102000, ap 61 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 63 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a10a000, ap 65 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "fdif";
+			reg = <0xa000 0x4>,
+			      <0xa010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-delay-us = <2>;
+			/* Domains (V, P, C): core, cam_pwrdm, iss_clkdm */
+			clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+	};
+
+	segment@180000 {					/* 0x4a180000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0001e000 0x0021e000 0x001000>,	/* ap 31 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 32 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 33 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 34 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 35 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 36 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 37 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 38 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 39 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 40 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 41 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 42 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 43 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 44 */
+			 <0x00016000 0x00216000 0x001000>,	/* ap 45 */
+			 <0x00017000 0x00217000 0x001000>,	/* ap 46 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 47 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 48 */
+			 <0x00018000 0x00218000 0x001000>,	/* ap 49 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 50 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 51 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 52 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 53 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 54 */
+			 <0x00028000 0x00228000 0x001000>,	/* ap 55 */
+			 <0x00029000 0x00229000 0x001000>,	/* ap 56 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 57 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 58 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 59 */
+			 <0x0001d000 0x0021d000 0x001000>;	/* ap 60 */
+
+		target-module@4000 {			/* 0x4a204000, ap 35 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a206000, ap 37 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 33 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 41 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 43 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 39 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 47 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x4a216000, ap 45 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 49 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 59 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 31 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 51 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 53 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x4a228000, ap 55 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 57 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+	};
+
+	segment@280000 {					/* 0x4a280000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	l4_cfg_segment_300000: segment@300000 {			/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
+			 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
+			 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
+			 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
+			 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
+			 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
+			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+			 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
+			 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
+			 <0x0002c000 0x0032c000 0x004000>;	/* ap 91 */
+
+		l4_cfg_target_0: target-module@0 {	/* 0x4a300000, ap 67 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00020000>,
+				 <0x00020000 0x00020000 0x00004000>,
+				 <0x00024000 0x00024000 0x00002000>,
+				 <0x00026000 0x00026000 0x00001000>,
+				 <0x00027000 0x00027000 0x00001000>,
+				 <0x00028000 0x00028000 0x00001000>,
+				 <0x00029000 0x00029000 0x00001000>,
+				 <0x0002a000 0x0002a000 0x00002000>,
+				 <0x0002c000 0x0002c000 0x00004000>,
+				 <0x00030000 0x00030000 0x00010000>;
+		};
+	};
+};
+
+&l4_wkup {						/* 0x4a300000 */
+	compatible = "ti,omap4-l4-wkup", "simple-bus";
+	reg = <0x4a300000 0x800>,
+	      <0x4a300800 0x800>,
+	      <0x4a301000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a300000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4a310000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4a320000 0x010000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4a300000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 15 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 16 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 17 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 20 */
+
+		target-module@4000 {			/* 0x4a304000, ap 17 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "counter_32k";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x20>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4a306000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,omap4-prm";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4a30a000, ap 15 34.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			scrm: scrm@0 {
+				compatible = "ti,omap4-scrm";
+				reg = <0x0 0x2000>;
+
+				scrm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				scrm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4a30c000, ap 19 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_wkup";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			omap4_scm_wkup: scm@c000 {
+				compatible = "ti,omap4-scm-wkup";
+				reg = <0xc000 0x1000>;
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4a310000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>,	/* ap 12 */
+			 <0x0000e000 0x0001e000 0x001000>,	/* ap 21 */
+			 <0x0000f000 0x0001f000 0x001000>;	/* ap 22 */
+
+		gpio1_target: target-module@0 {			/* 0x4a310000, ap 5 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "gpio1";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl OMAP4_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				ti,gpio-always-on;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4a314000, ap 7 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "wd_timer2";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@8000 {			/* 0x4a318000, ap 9 1c.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			ti,hwmods = "timer1";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>,
+			      <0x8014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4a31c000, ap 11 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "kbd";
+			reg = <0xc000 0x4>,
+			      <0xc010 0x4>,
+			      <0xc014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl OMAP4_KBD_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			keypad: keypad@0 {
+				compatible = "ti,omap4-keypad";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				reg-names = "mpu";
+			};
+		};
+
+		target-module@e000 {			/* 0x4a31e000, ap 21 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "ctrl_module_pad_wkup";
+			reg = <0xe000 0x4>,
+			      <0xe010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): wakeup, wkup_pwrdm, l4_wkup_clkdm */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+
+			omap4_pmx_wkup: pinmux@40 {
+				compatible = "ti,omap4-padconf",
+					     "pinctrl-single";
+				reg = <0x40 0x0038>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#pinctrl-cells = <1>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0x7fff>;
+			};
+		};
+	};
+
+	segment@20000 {					/* 0x4a320000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 23 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 24 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 25 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 26 */
+			 <0x00004000 0x00024000 0x001000>,	/* ap 27 */
+			 <0x00005000 0x00025000 0x001000>,	/* ap 28 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 29 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 30 */
+			 <0x00009000 0x00029000 0x000400>;	/* ap 31 */
+
+		target-module@0 {			/* 0x4a320000, ap 23 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@2000 {			/* 0x4a322000, ap 25 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@4000 {			/* 0x4a324000, ap 27 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4a326000, ap 13 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00003000 0x00009000 0x00000400>;
+		};
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,omap4-l4-per", "simple-bus";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00040000 0x00040000 0x010000>,	/* ap 13 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 14 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 15 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 16 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 17 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 18 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 19 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 20 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 21 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 22 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 23 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 24 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 25 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 26 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 27 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 28 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 29 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 30 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 31 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 32 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 33 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 34 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 35 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 36 */
+			 <0x00096000 0x00096000 0x001000>,	/* ap 37 */
+			 <0x00097000 0x00097000 0x001000>,	/* ap 38 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 39 */
+			 <0x00077000 0x00077000 0x001000>,	/* ap 40 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 41 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 42 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 43 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 44 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 45 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 46 */
+			 <0x000b0000 0x000b0000 0x001000>,	/* ap 47 */
+			 <0x000b1000 0x000b1000 0x001000>,	/* ap 48 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 49 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 50 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 51 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 52 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 53 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 54 */
+			 <0x0009e000 0x0009e000 0x001000>,	/* ap 55 */
+			 <0x0009f000 0x0009f000 0x001000>,	/* ap 56 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 57 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 58 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 59 */
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 60 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 61 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 62 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 63 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 64 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 65 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 66 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 67 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 68 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 69 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 70 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 71 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 72 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 73 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 74 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 75 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 76 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 79 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 80 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 81 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 82 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 83 */
+			 <0x000a5000 0x000a5000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "uart3";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 02.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			ti,hwmods = "timer2";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>,
+			      <0x32014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 7 04.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			ti,hwmods = "timer3";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 9 0e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			ti,hwmods = "timer4";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			ti,hwmods = "timer9";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@40000 {			/* 0x48040000, ap 13 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+		};
+
+		target-module@55000 {			/* 0x48055000, ap 15 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "gpio2";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@57000 {			/* 0x48057000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "gpio3";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 19 10.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "gpio4";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 21 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "gpio5";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 23 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "gpio6";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 0>,
+				 <&l4_per_clkctrl OMAP4_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 25 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "i2c3";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 26 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "uart1";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 28 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "uart2";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 30 1c.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "uart4";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,omap4-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 32 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "i2c1";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 34 30.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "i2c2";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		target-module@76000 {			/* 0x48076000, ap 39 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "slimbus2";
+			reg = <0x76000 0x4>,
+			      <0x76010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x76000 0x1000>;
+
+			/* No child device binding or driver in mainline */
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 41 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "elm";
+			reg = <0x78000 0x4>,
+			      <0x78010 0x4>,
+			      <0x78014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 43 24.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			ti,hwmods = "timer10";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>,
+			      <0x86014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap3430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			ti,hwmods = "timer11";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap4430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@90000 {			/* 0x48090000, ap 57 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+		};
+
+		target-module@96000 {			/* 0x48096000, ap 37 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "mcbsp4";
+			reg = <0x9608c 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCBSP4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x96000 0x1000>;
+
+			mcbsp4: mcbsp@0 {
+				compatible = "ti,omap4-mcbsp";
+				reg = <0x0 0xff>; /* L4 Interconnect */
+				reg-names = "mpu";
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "common";
+				ti,buffer-size = <128>;
+				dmas = <&sdma 31>,
+				       <&sdma 32>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 49 22.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mcspi1";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma 35>,
+				       <&sdma 36>,
+				       <&sdma 37>,
+				       <&sdma 38>,
+				       <&sdma 39>,
+				       <&sdma 40>,
+				       <&sdma 41>,
+				       <&sdma 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 51 2c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mcspi2";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 43>,
+				       <&sdma 44>,
+				       <&sdma 45>,
+				       <&sdma 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 53 36.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mmc1";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				ti,dual-volt;
+				ti,needs-special-reset;
+				dmas = <&sdma 61>, <&sdma 62>;
+				dma-names = "tx", "rx";
+				pbias-supply = <&pbias_mmc_reg>;
+			};
+		};
+
+		target-module@9e000 {			/* 0x4809e000, ap 55 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9e000 0x1000>;
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 79 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 59 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 61 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 63 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mmc3";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 77>, <&sdma 78>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b0000 {			/* 0x480b0000, ap 47 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb0000 0x1000>;
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 65 3c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "hdq1w";
+			reg = <0xb2000 0x4>,
+			      <0xb2014 0x4>,
+			      <0xb2018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			ti,no-reset-on-init;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+
+			hdqw1w: 1w@0 {
+				compatible = "ti,omap3-1w";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 67 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mmc2";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l3init_pwrdm, l3_init_clkdm */
+			clocks = <&l3_init_clkctrl OMAP4_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 47>, <&sdma 48>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 69 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mcspi3";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma 15>, <&sdma 16>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 71 32.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mcspi4";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma 70>, <&sdma 71>;
+				dma-names = "tx0", "rx0";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 73 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mmc4";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 57>, <&sdma 58>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 75 4e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			ti,hwmods = "mmc5";
+			reg = <0xd5000 0x4>,
+			      <0xd5010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_MMC5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+
+			mmc5: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				ti,needs-special-reset;
+				dmas = <&sdma 59>, <&sdma 60>;
+				dma-names = "tx", "rx";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00150000 0x00350000 0x001000>,	/* ap 77 */
+			 <0x00151000 0x00351000 0x001000>;	/* ap 78 */
+
+		target-module@150000 {			/* 0x48350000, ap 77 4c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			ti,hwmods = "i2c4";
+			reg = <0x150000 0x8>,
+			      <0x150010 0x8>,
+			      <0x150090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): core, l4per_pwrdm, l4_per_clkdm */
+			clocks = <&l4_per_clkctrl OMAP4_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x150000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 5501d1b..27895c1 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -5,6 +5,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <dt-bindings/input/input.h>
 #include "elpida_ecb240abacn.dtsi"
 
 / {
@@ -43,6 +44,21 @@
 		};
 	};
 
+	gpio_keys: gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&button_pins
+		>;
+
+		buttonS2 {
+			label = "button S2";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;	/* gpio_121 */
+			linux,code = <BTN_0>;
+			wakeup-source;
+		};
+	};
+
 	sound: sound {
 		compatible = "ti,abe-twl6040";
 		ti,model = "PandaBoard";
@@ -357,6 +373,12 @@
 			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpio_121 */
+		>;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -464,7 +486,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 940fe4f..19d02df 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -46,6 +46,12 @@
 			OMAP4_IOPAD(0x0f6, PIN_OUTPUT | MUX_MODE3)	/* gpio_110 */
 		>;
 	};
+
+	button_pins: pinmux_button_pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x11b, PIN_INPUT_PULLUP | MUX_MODE3) /* gpio_113 */
+		>;
+	};
 };
 
 &led_wkgpio_pins {
@@ -68,6 +74,12 @@
 	};
 };
 
-&gpio1 {
+&gpio_keys {
+	buttonS2 {
+		gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* gpio_113 */
+	};
+};
+
+&gpio1_target {
 	 ti,no-reset-on-init;
 };
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 280d92d..490726b 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -493,7 +493,7 @@
 		compatible = "ti,wl1281";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 1c5f6f3..8789234 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -72,7 +72,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */
 		ref-clock-frequency = <38400000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index e554b6e..1a96d43 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -139,174 +139,13 @@
 		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 
-		l4_cfg: l4@4a000000 {
-			compatible = "ti,omap4-l4-cfg", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x1000000>;
+		l4_wkup: interconnect@4a300000 {
+		};
 
-			cm1: cm1@4000 {
-				compatible = "ti,omap4-cm1", "simple-bus";
-				reg = <0x4000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x4000 0x2000>;
+		l4_cfg: interconnect@4a000000 {
+		};
 
-				cm1_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm1_clockdomains: clockdomains {
-				};
-			};
-
-			cm2: cm2@8000 {
-				compatible = "ti,omap4-cm2", "simple-bus";
-				reg = <0x8000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x8000 0x2000>;
-
-				cm2_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm2_clockdomains: clockdomains {
-				};
-			};
-
-			omap4_scm_core: scm@2000 {
-				compatible = "ti,omap4-scm-core", "simple-bus";
-				reg = <0x2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x1000>;
-				ti,hwmods = "ctrl_module_core";
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-				};
-			};
-
-			omap4_padconf_core: scm@100000 {
-				compatible = "ti,omap4-scm-padconf-core",
-					     "simple-bus";
-				reg = <0x100000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x100000 0x1000>;
-				ti,hwmods = "ctrl_module_pad_core";
-
-				omap4_pmx_core: pinmux@40 {
-					compatible = "ti,omap4-padconf",
-						     "pinctrl-single";
-					reg = <0x40 0x0196>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <16>;
-					pinctrl-single,function-mask = <0x7fff>;
-				};
-
-				omap4_padconf_global: omap4_padconf_global@5a0 {
-					compatible = "syscon",
-						     "simple-bus";
-					reg = <0x5a0 0x170>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x5a0 0x170>;
-
-					pbias_regulator: pbias_regulator@60 {
-						compatible = "ti,pbias-omap4", "ti,pbias-omap";
-						reg = <0x60 0x4>;
-						syscon = <&omap4_padconf_global>;
-						pbias_mmc_reg: pbias_mmc_omap4 {
-							regulator-name = "pbias_mmc_omap4";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3000000>;
-						};
-					};
-				};
-			};
-
-			l4_wkup: l4@300000 {
-				compatible = "ti,omap4-l4-wkup", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x300000 0x40000>;
-
-				counter32k: counter@4000 {
-					compatible = "ti,omap-counter32k";
-					reg = <0x4000 0x20>;
-					ti,hwmods = "counter_32k";
-				};
-
-				prm: prm@6000 {
-					compatible = "ti,omap4-prm";
-					reg = <0x6000 0x2000>;
-					interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x6000 0x2000>;
-
-					prm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					prm_clockdomains: clockdomains {
-					};
-				};
-
-				scrm: scrm@a000 {
-					compatible = "ti,omap4-scrm";
-					reg = <0xa000 0x2000>;
-
-					scrm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					scrm_clockdomains: clockdomains {
-					};
-				};
-
-				omap4_scm_wkup: scm@c000 {
-					compatible = "ti,omap4-scm-wkup";
-					reg = <0xc000 0x1000>;
-					ti,hwmods = "ctrl_module_wkup";
-				};
-
-				omap4_padconf_wkup: padconf@1e000 {
-					compatible = "ti,omap4-scm-padconf-wkup",
-						     "simple-bus";
-					reg = <0x1e000 0x1000>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0x1e000 0x1000>;
-					ti,hwmods = "ctrl_module_pad_wkup";
-
-					omap4_pmx_wkup: pinmux@40 {
-						compatible = "ti,omap4-padconf",
-							     "pinctrl-single";
-						reg = <0x40 0x0038>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#pinctrl-cells = <1>;
-						#interrupt-cells = <1>;
-						interrupt-controller;
-						pinctrl-single,register-width = <16>;
-						pinctrl-single,function-mask = <0x7fff>;
-					};
-				};
-			};
+		l4_per: interconnect@48000000 {
 		};
 
 		ocmcram: ocmcram@40304000 {
@@ -314,114 +153,6 @@
 			reg = <0x40304000 0xa000>; /* 40k */
 		};
 
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <127>;
-			ti,hwmods = "dma_system";
-		};
-
-		gpio1: gpio@4a310000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4a310000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		target-module@48076000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "slimbus2";
-			reg = <0x48076000 0x4>,
-			      <0x48076010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l4_per_clkctrl OMAP4_SLIMBUS2_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48076000 0x001000>;
-
-			/* No child device binding or driver in mainline */
-		};
-
-		elm: elm@48078000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48078000 0x2000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
 		gpmc: gpmc@50000000 {
 			compatible = "ti,omap4430-gpmc";
 			reg = <0x50000000 0x1000>;
@@ -442,302 +173,6 @@
 			#gpio-cells = <2>;
 		};
 
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-		};
-
-		target-module@4a0db000 {
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_iva";
-			reg = <0x4a0db038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_IVA_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a0db000 0x001000>;
-
-			smartreflex_iva: smartreflex@0 {
-				compatible = "ti,omap4-smartreflex-iva";
-				reg = <0 0x80>;
-				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@4a0dd000 {
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_core";
-			reg = <0x4a0dd038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_CORE_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a0dd000 0x001000>;
-
-			smartreflex_core: smartreflex@0 {
-				compatible = "ti,omap4-smartreflex-core";
-				reg = <0 0x80>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		target-module@4a0d9000 {
-			compatible = "ti,sysc-omap4-sr", "ti,sysc";
-			ti,hwmods = "smartreflex_mpu";
-			reg = <0x4a0d9038 0x4>;
-			reg-names = "sysc";
-			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>,
-					<SYSC_IDLE_SMART_WKUP>;
-			clocks = <&l4_ao_clkctrl OMAP4_SMARTREFLEX_MPU_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a0d9000 0x001000>;
-
-			smartreflex_mpu: smartreflex@0 {
-				compatible = "ti,omap4-smartreflex-mpu";
-				reg = <0 0x80>;
-				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-		};
-
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-		};
-
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-		};
-
-		i2c4: i2c@48350000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48350000 0x100>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-		};
-
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-		};
-
-		hdqw1w: 1w@480b2000 {
-			compatible = "ti,omap3-1w";
-			reg = <0x480b2000 0x1000>;
-			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "hdq1w";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-		};
-
-		mmc5: mmc@480d5000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d5000 0x400>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc5";
-			ti,needs-special-reset;
-			dmas = <&sdma 59>, <&sdma 60>;
-			dma-names = "tx", "rx";
-		};
-
-		hsi: hsi@4a058000 {
-			compatible = "ti,omap4-hsi";
-			reg = <0x4a058000 0x4000>,
-			      <0x4a05c000 0x1000>;
-			reg-names = "sys", "gdd";
-			ti,hwmods = "hsi";
-
-			clocks = <&l3_init_clkctrl OMAP4_HSI_CLKCTRL 0>;
-			clock-names = "hsi_fck";
-
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "gdd_mpu";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a058000 0x4000>;
-
-			hsi_port1: hsi-port@2000 {
-				compatible = "ti,omap4-hsi-port";
-				reg = <0x2000 0x800>,
-				      <0x2800 0x800>;
-				reg-names = "tx", "rx";
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			hsi_port2: hsi-port@3000 {
-				compatible = "ti,omap4-hsi-port";
-				reg = <0x3000 0x800>,
-				      <0x3800 0x800>;
-				reg-names = "tx", "rx";
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
 		mmu_dsp: mmu@4a066000 {
 			compatible = "ti,omap4-iommu";
 			reg = <0x4a066000 0x100>;
@@ -779,20 +214,33 @@
 			#iommu-cells = <0>;
 			ti,iommu-bus-err-back;
 		};
-
-		wdt2: wdt@4a314000 {
-			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
-			reg = <0x4a314000 0x80>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		wdt3: wdt@40130000 {
-			compatible = "ti,omap4-wdt", "ti,omap3-wdt";
-			reg = <0x40130000 0x80>, /* MPU private access */
-			      <0x49030000 0x80>; /* L3 Interconnect */
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@40130000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "wd_timer3";
+			reg = <0x40130000 0x4>,
+			      <0x40130010 0x4>,
+			      <0x40130014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */
+			clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */
+				 <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */
+
+			wdt3: wdt@0 {
+				compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		mcpdm: mcpdm@40132000 {
@@ -938,28 +386,6 @@
 			 */
 		};
 
-		mcbsp4: mcbsp@48096000 {
-			compatible = "ti,omap4-mcbsp";
-			reg = <0x48096000 0xff>; /* L4 Interconnect */
-			reg-names = "mpu";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "common";
-			ti,buffer-size = <128>;
-			ti,hwmods = "mcbsp4";
-			dmas = <&sdma 31>,
-			       <&sdma 32>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		keypad: keypad@4a31c000 {
-			compatible = "ti,omap4-keypad";
-			reg = <0x4a31c000 0x80>;
-			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-			reg-names = "mpu";
-			ti,hwmods = "kbd";
-		};
-
 		dmm@4e000000 {
 			compatible = "ti,omap4-dmm";
 			reg = <0x4e000000 0x800>;
@@ -991,95 +417,6 @@
 			hw-caps-temp-alert;
 		};
 
-		ocp2scp@4a0ad000 {
-			compatible = "ti,omap-ocp2scp";
-			reg = <0x4a0ad000 0x1f>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp_usb_phy";
-			usb2_phy: usb2phy@4a0ad080 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a0ad080 0x58>;
-				ctrl-module = <&omap_control_usb2phy>;
-				clocks = <&usb_phy_cm_clk32k>;
-				clock-names = "wkupclk";
-				#phy-cells = <0>;
-			};
-		};
-
-		mailbox: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-			mbox_ipu: mbox_ipu {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <1 0 0>;
-			};
-			mbox_dsp: mbox_dsp {
-				ti,mbox-tx = <3 0 0>;
-				ti,mbox-rx = <2 0 0>;
-			};
-		};
-
-		target-module@4a10a000 {
-			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "fdif";
-			reg = <0x4a10a000 0x4>,
-			      <0x4a10a010 0x4>;
-			reg-names = "rev", "sysc";
-			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
-			ti,sysc-midle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,sysc-delay-us = <2>;
-			clocks = <&iss_clkctrl OMAP4_FDIF_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a10a000 0x1000>;
-
-			/* No child device binding or driver in mainline */
-		};
-
-		timer1: timer@4a318000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x4a318000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-			clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
-			clock-names = "fck";
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
 		timer5: timer@40138000 {
 			compatible = "ti,omap4430-timer";
 			reg = <0x40138000 0x80>,
@@ -1117,92 +454,6 @@
 			ti,timer-dsp;
 		};
 
-		timer9: timer@4803e000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			ti,timer-pwm;
-		};
-
-		timer10: timer@48086000 {
-			compatible = "ti,omap3430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			ti,timer-pwm;
-		};
-
-		timer11: timer@48088000 {
-			compatible = "ti,omap4430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			ti,timer-pwm;
-		};
-
-		usbhstll: usbhstll@4a062000 {
-			compatible = "ti,usbhs-tll";
-			reg = <0x4a062000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "usb_tll_hs";
-		};
-
-		usbhshost: usbhshost@4a064000 {
-			compatible = "ti,usbhs-host";
-			reg = <0x4a064000 0x800>;
-			ti,hwmods = "usb_host_hs";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&init_60m_fclk>,
-				 <&xclk60mhsp1_ck>,
-				 <&xclk60mhsp2_ck>;
-			clock-names = "refclk_60m_int",
-				      "refclk_60m_ext_p1",
-				      "refclk_60m_ext_p2";
-
-			usbhsohci: ohci@4a064800 {
-				compatible = "ti,ohci-omap3";
-				reg = <0x4a064800 0x400>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-				remote-wakeup-connected;
-			};
-
-			usbhsehci: ehci@4a064c00 {
-				compatible = "ti,ehci-omap";
-				reg = <0x4a064c00 0x400>;
-				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		omap_control_usb2phy: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usbotg: control-phy@4a00233c {
-			compatible = "ti,control-phy-otghs";
-			reg = <0x4a00233c 0x4>;
-			reg-names = "otghs_control";
-		};
-
-		usb_otg_hs: usb_otg_hs@4a0ab000 {
-			compatible = "ti,omap4-musb";
-			reg = <0x4a0ab000 0x7ff>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "mc", "dma";
-			ti,hwmods = "usb_otg_hs";
-			usb-phy = <&usb2_phy>;
-			phys = <&usb2_phy>;
-			phy-names = "usb2-phy";
-			multipoint = <1>;
-			num-eps = <16>;
-			ram-bits = <12>;
-			ctrl-module = <&omap_control_usbotg>;
-		};
-
 		aes1: aes@4b501000 {
 			compatible = "ti,omap4-aes";
 			ti,hwmods = "aes1";
@@ -1377,4 +628,5 @@
 	};
 };
 
+#include "omap4-l4.dtsi"
 #include "omap44xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index ad97493..2223dc0 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -92,4 +92,40 @@
 	coefficients = <348 (-9301)>;
 };
 
+/* Only some L4 CFG interconnect ranges are different on 4460 */
+&l4_cfg_segment_300000 {
+	ranges = <0x00000000 0x00300000 0x020000>,	/* ap 67 */
+		 <0x00040000 0x00340000 0x001000>,	/* ap 68 */
+		 <0x00020000 0x00320000 0x004000>,	/* ap 71 */
+		 <0x00024000 0x00324000 0x002000>,	/* ap 72 */
+		 <0x00026000 0x00326000 0x001000>,	/* ap 73 */
+		 <0x00027000 0x00327000 0x001000>,	/* ap 74 */
+		 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+		 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+		 <0x00030000 0x00330000 0x010000>,	/* ap 77 */
+		 <0x0002a000 0x0032a000 0x002000>,	/* ap 90 */
+		 <0x0002c000 0x0032c000 0x004000>,	/* ap 91 */
+		 <0x00010000 0x00310000 0x008000>,	/* ap 92 */
+		 <0x00018000 0x00318000 0x004000>,	/* ap 93 */
+		 <0x0001c000 0x0031c000 0x002000>,	/* ap 94 */
+		 <0x0001e000 0x0031e000 0x002000>;	/* ap 95 */
+};
+
+&l4_cfg_target_0 {
+	ranges = <0x00000000 0x00000000 0x00010000>,
+		 <0x00010000 0x00010000 0x00008000>,
+		 <0x00018000 0x00018000 0x00004000>,
+		 <0x0001c000 0x0001c000 0x00002000>,
+		 <0x0001e000 0x0001e000 0x00002000>,
+		 <0x00020000 0x00020000 0x00004000>,
+		 <0x00024000 0x00024000 0x00002000>,
+		 <0x00026000 0x00026000 0x00001000>,
+		 <0x00027000 0x00027000 0x00001000>,
+		 <0x00028000 0x00028000 0x00001000>,
+		 <0x00029000 0x00029000 0x00001000>,
+		 <0x0002a000 0x0002a000 0x00002000>,
+		 <0x0002c000 0x0002c000 0x00004000>,
+		 <0x00030000 0x00030000 0x00010000>;
+};
+
 /include/ "omap446x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 3b22445..ab6f640 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -364,7 +364,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&wlcore_irq_pin>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;	/* gpio 14 */
+		interrupts = <14 IRQ_TYPE_EDGE_RISING>;	/* gpio 14 */
 		ref-clock-frequency = <26000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 732b61a..574ac11 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -61,6 +61,20 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
+
+			operating-points = <
+				/* kHz    uV */
+				1000000 1060000
+				1500000 1250000
+			>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index e4ebcde..a520b4c 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -141,7 +141,7 @@
 			interrupts = <30 31>;
 		};
 
-		lcd-controller@40500000 {
+		lcdc: lcd-controller@40500000 {
 			compatible = "marvell,pxa2xx-lcdc";
 			reg = <0x44000000 0x10000>;
 			interrupts = <17>;
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 132a3b8..3a8f0ed 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -135,6 +135,7 @@
 			reg = <0x43100000 90>;
 			interrupts = <45>;
 			clocks = <&clks CLK_NAND>;
+			clock-names = "core";
 			dmas = <&pdma 97 3>;
 			dma-names = "data";
 			#address-cells = <1>;
@@ -242,6 +243,38 @@
 			clocks = <&clks CLK_PWM1>;
 			status = "disabled";
 		};
+
+		ssp1: ssp@41000000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41000000 0x40>;
+			interrupts = <24>;
+			clocks = <&clks CLK_SSP1>;
+			status = "disabled";
+		};
+
+		ssp2: ssp@41700000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41700000 0x40>;
+			interrupts = <16>;
+			clocks = <&clks CLK_SSP2>;
+			status = "disabled";
+		};
+
+		ssp3: ssp@41900000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41900000 0x40>;
+			interrupts = <0>;
+			clocks = <&clks CLK_SSP3>;
+			status = "disabled";
+		};
+
+		ssp4: ssp@41a00000 {
+			compatible = "mrvl,pxa3xx-ssp";
+			reg = <0x41a00000 0x40>;
+			interrupts = <13>;
+			clocks = <&clks CLK_SSP4>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7bcd763..78db673 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -77,6 +77,14 @@
 			reg = <0x1>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
+			operating-points = <
+				/* kHz	uV (fixed) */
+				48000	1100000
+				200000	1100000
+				500000	1100000
+				666000	1100000
+			>;
+			clock-latency = <256000>;
 		};
 
 		cpu@2 {
@@ -88,6 +96,14 @@
 			reg = <0x2>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
+			operating-points = <
+				/* kHz	uV (fixed) */
+				48000	1100000
+				200000	1100000
+				500000	1100000
+				666000	1100000
+			>;
+			clock-latency = <256000>;
 		};
 
 		cpu@3 {
@@ -99,6 +115,14 @@
 			reg = <0x3>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
+			operating-points = <
+				/* kHz	uV (fixed) */
+				48000	1100000
+				200000	1100000
+				500000	1100000
+				666000	1100000
+			>;
+			clock-latency = <256000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 1e0a3b4..70790ac 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Qualcomm IPQ8064";
@@ -43,7 +44,8 @@
 
 	cpu-pmu {
 		compatible = "qcom,krait-pmu";
-		interrupts = <1 10 0x304>;
+		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+					  IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	reserved-memory {
@@ -97,7 +99,7 @@
 			clock-names = "ahbix-clk",
 					"mi2s-osr-clk",
 					"mi2s-bit-clk";
-			interrupts = <0 85 1>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "lpass-irq-lpaif";
 			reg = <0x28100000 0x10000>;
 			reg-names = "lpass-lpaif";
@@ -111,7 +113,7 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			interrupts = <0 16 0x4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -125,11 +127,16 @@
 		timer@200a000 {
 			compatible = "qcom,kpss-timer",
 				     "qcom,kpss-wdt-ipq8064", "qcom,msm-timer";
-			interrupts = <1 1 0x301>,
-				     <1 2 0x301>,
-				     <1 3 0x301>,
-				     <1 4 0x301>,
-				     <1 5 0x301>;
+			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>,
+				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
+						 IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <25000000>,
 					  <32768>;
@@ -177,7 +184,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12490000 0x1000>,
 				      <0x12480000 0x1000>;
-				interrupts = <0 195 0x0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -186,7 +193,7 @@
 			i2c@124a0000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x124a0000 0x1000>;
-				interrupts = <0 196 0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
@@ -215,7 +222,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16340000 0x1000>,
 				      <0x16300000 0x1000>;
-				interrupts = <0 152 0x0>;
+				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -224,7 +231,7 @@
 			i2c@16380000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x16380000 0x1000>;
-				interrupts = <0 153 0>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
 				clock-names = "core", "iface";
@@ -252,7 +259,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x1000>,
 				      <0x1a200000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -261,7 +268,7 @@
 			i2c@1a280000 {
 				compatible = "qcom,i2c-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 0>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
@@ -274,7 +281,7 @@
 			spi@1a280000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 0>;
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 
 				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
@@ -301,7 +308,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
 				      <0x16600000 0x1000>;
-				interrupts = <0 158 0x0>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -323,7 +330,7 @@
 			compatible = "qcom,ipq806x-ahci", "generic-ahci";
 			reg = <0x29000000 0x180>;
 
-			interrupts = <0 209 0x0>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc SFAB_SATA_S_H_CLK>,
 				 <&gcc SATA_H_CLK>,
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 4dc0b34..c2dc9d0 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -189,6 +189,8 @@
 						regulator-max-microvolt = <2950000>;
 
 						regulator-boot-on;
+						regulator-system-load = <200000>;
+						regulator-allow-set-load;
 					};
 
 					l21 {
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 5af2a01..474baa0 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Genmai board
  *
  * Copyright (C) 2013-14 Renesas Solutions Corp.
  * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts
index 779f724..fe1a4aa 100644
--- a/arch/arm/boot/dts/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the GR-Peach board
  *
  * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
  * Copyright (C) 2016 Renesas Electronics
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 5dcaaf1..8ee44a100 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the RZ/A1H RSK board
  *
  * Copyright (C) 2016 Renesas Electronics
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index a54822e..2211f88 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r7s72100 SoC
  *
  * Copyright (C) 2013-14 Renesas Solutions Corp.
  * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r7s72100-clock.h>
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 125c39c..d530f45 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the APE6EVM board
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 080d037..dd865f3 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a73a4 SoC
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Magnus Damm
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a73a4-clock.h>
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 03b00d8..32757ca 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the armadillo 800 eva board
  *
  * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index eb9a911..383cba6 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7740 SoC
  *
  * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7740-clock.h>
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
index d90eb84..3275451 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZ/G1M Qseven board + camera daughter board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
index 6aa6b74..b683db4 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
+++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZ/G1M Qseven board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
index d364685..0e2e033 100644
--- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
+++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZG1M-20M Qseven SOM
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7743.dtsi"
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index 3d918d1..ca0e0fc 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the SK-RZG1M board
  *
  * Copyright (C) 2016-2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 142949d..24715f7 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7743 SoC
  *
  * Copyright (C) 2016-2017 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -98,8 +95,17 @@
 			reg = <1>;
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
 		};
 
 		L2_CA15: cache-controller-0 {
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index d34de82..2aeebfc 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZG1E SODIMM carrier board + HDMI daughter
  * board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7745-iwg22d-sodimm.dts"
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index a4058f4..1db220c 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZG1E SODIMM carrier board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
index 29b6e10..41f111b 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
+++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7745.dtsi"
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index b4d679b..655b10b 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the SK-RZG1E board
  *
  * Copyright (C) 2016-2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 1cb7a7a..c53f7ff 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7745 SoC
  *
  * Copyright (C) 2016-2017 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index c85032f..87d32d3 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -7,7 +7,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
 / {
 	compatible = "renesas,r8a77470";
 	#address-cells = <2>;
@@ -22,7 +22,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
-			clocks = <&cpg CPG_CORE 0>;
+			clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
 			power-domains = <&sysc 5>;
 			next-level-cache = <&L2_CA7>;
 		};
@@ -209,7 +209,7 @@
 			reg = <0 0xe6e60000 0 0x40>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 721>,
-				 <&cpg CPG_CORE 5>, <&scif_clk>;
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
 			       <&dmac1 0x29>, <&dmac1 0x2a>;
@@ -225,7 +225,7 @@
 			reg = <0 0xe6e68000 0 0x40>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 720>,
-				 <&cpg CPG_CORE 5>, <&scif_clk>;
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
 			       <&dmac1 0x2d>, <&dmac1 0x2e>;
@@ -241,7 +241,7 @@
 			reg = <0 0xe6e58000 0 0x40>;
 			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 719>,
-				 <&cpg CPG_CORE 5>, <&scif_clk>;
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
 			       <&dmac1 0x2b>, <&dmac1 0x2c>;
@@ -257,7 +257,7 @@
 			reg = <0 0xe6ea8000 0 0x40>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 718>,
-				 <&cpg CPG_CORE 5>, <&scif_clk>;
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
 			       <&dmac1 0x2f>, <&dmac1 0x30>;
@@ -273,7 +273,7 @@
 			reg = <0 0xe6ee0000 0 0x40>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 715>,
-				 <&cpg CPG_CORE 5>, <&scif_clk>;
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
 			       <&dmac1 0xfb>, <&dmac1 0xfc>;
@@ -289,7 +289,7 @@
 			reg = <0 0xe6ee8000 0 0x40>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 714>,
-				 <&cpg CPG_CORE 5>, <&scif_clk>;
+				 <&cpg CPG_CORE R8A77470_CLK_ZS>, <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
 			       <&dmac1 0xfd>, <&dmac1 0xfe>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index c79d55e..de808d2 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Reference Device Tree Source for the Bock-W board
  *
@@ -8,10 +9,6 @@
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 3b49f9e..1bce16c 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Renesas r8a7778
  *
@@ -8,10 +9,6 @@
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7778-clock.h>
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 4b9006b..a4d0038 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Marzen board
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index e79ae30..6b997bc 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for Renesas r8a7779
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
  * Copyright (C) 2013 Simon Horman
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7779-clock.h>
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 092610e..50312e7 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Lager board
  *
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded, Inc.
  * Copyright (C) 2015-2016 Renesas Electronics Corporation
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4d06b15..0925bdc 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7790 SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corporation
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
@@ -79,12 +76,12 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1300000000>;
-			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1400000 1000000>,
@@ -104,6 +101,16 @@
 			power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
 		};
 
 		cpu2: cpu@2 {
@@ -115,6 +122,16 @@
 			power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
 		};
 
 		cpu3: cpu@3 {
@@ -126,6 +143,16 @@
 			power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
 			next-level-cache = <&L2_CA15>;
 			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
 		};
 
 		cpu4: cpu@100 {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 8ab793d..ce22db0 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Koelsch board
  *
  * Copyright (C) 2013 Renesas Electronics Corporation
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index a01101b..f02036e 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Porter board
  *
  * Copyright (C) 2015 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
@@ -375,10 +372,43 @@
 	clock-frequency = <400000>;
 };
 
+&i2c6 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	pmic@5a {
+		compatible = "dlg,da9063l";
+		reg = <0x5a>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		wdt {
+			compatible = "dlg,da9063-watchdog";
+		};
+	};
+
+	vdd_dvfs: regulator@68 {
+		compatible = "dlg,da9210";
+		reg = <0x68>;
+		interrupt-parent = <&irqc0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &sata0 {
 	status = "okay";
 };
 
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+};
+
 /* composite video input */
 &vin0 {
 	status = "okay";
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6e1dd7a..991ac6fe 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7791 SoC
  *
  * Copyright (C) 2013-2015 Renesas Electronics Corporation
  * Copyright (C) 2013-2014 Renesas Solutions Corp.
  * Copyright (C) 2014 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
@@ -78,11 +75,11 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1500000000>;
-			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1500000 1000000>,
@@ -101,6 +98,16 @@
 			clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
 			power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
 			next-level-cache = <&L2_CA15>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
 		};
 
 		L2_CA15: cache-controller-0 {
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index 04fb709..f923012 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Blanche board
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
  * Copyright (C) 2016 Cogent  Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index db01de7..f46f456 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Wheat board
  *
  * Copyright (C) 2016 Renesas Electronics Corporation
  * Copyright (C) 2016 Cogent  Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index f44257d..63a978e 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7792 SoC
  *
  * Copyright (C) 2016 Cogent Embedded Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7792-cpg-mssr.h>
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index aa209f6..6b2f3a4 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Gose board
  *
  * Copyright (C) 2014-2015 Renesas Electronics Corporation
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 4abecfc..620a570 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7793 SoC
  *
  * Copyright (C) 2014-2015 Renesas Electronics Corporation
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7793-cpg-mssr.h>
@@ -70,10 +67,10 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1500000000>;
-			voltage-tolerance = <1>; /* 1% */
 			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
-			clock-latency = <300000>; /* 300 us */
 			power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
 
 			/* kHz - uV - OPPs unknown yet */
 			operating-points = <1500000 1000000>,
@@ -92,6 +89,17 @@
 			clock-frequency = <1500000000>;
 			clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
 			power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1500000 1000000>,
+					   <1312500 1000000>,
+					   <1125000 1000000>,
+					   < 937500 1000000>,
+					   < 750000 1000000>,
+					   < 375000 1000000>;
+			next-level-cache = <&L2_CA15>;
 		};
 
 		L2_CA15: cache-controller-0 {
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index e170275..ef7e2a8 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Alt board
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 7808aae..daec965 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the SILK board
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
  * Copyright (C) 2014-2015 Renesas Solutions Corp.
  * Copyright (C) 2014-2015 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7361969..ea2ca4b 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7794 SoC
  *
  * Copyright (C) 2014 Renesas Electronics Corporation
  * Copyright (C) 2014 Ulrich Hecht
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7794-cpg-mssr.h>
diff --git a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
index 238d14b..79fce67 100644
--- a/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
+++ b/arch/arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Common file for the AA104XD12 panel connected to Renesas R-Car boards
  *
  * Copyright (C) 2014 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 / {
diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
index 04aafd4..6e7589e 100644
--- a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
+++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Common file for the AA121TD01 panel connected to Renesas R-Car boards
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 / {
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
new file mode 100644
index 0000000..4e57ae2
--- /dev/null
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZN1D-DB Board
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ */
+
+/dts-v1/;
+
+#include "r9a06g032.dtsi"
+
+/ {
+	model = "RZN1D-DB Board";
+	compatible = "renesas,rzn1d400-db", "renesas,r9a06g032";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
new file mode 100644
index 0000000..afe29c9
--- /dev/null
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base Device Tree Source for the Renesas RZ/N1D (R9A06G032)
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a06g032";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clocks = <&sysctrl 84>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <1>;
+			clocks = <&sysctrl 84>;
+			enable-method = "renesas,r9a06g032-smp";
+			cpu-release-addr = <0 0x4000c204>;
+		};
+	};
+
+	ext_jtag_clk: extjtagclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ext_mclk: extmclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <40000000>;
+	};
+
+	ext_rgmii_ref: extrgmiiref {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	ext_rtc_clk: extrtcclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&gic>;
+		ranges;
+
+		sysctrl: system-controller@4000c000 {
+			compatible = "renesas,r9a06g032-sysctrl";
+			reg = <0x4000c000 0x1000>;
+			status = "okay";
+			#clock-cells = <1>;
+
+			clocks = <&ext_mclk>, <&ext_rtc_clk>,
+					<&ext_jtag_clk>, <&ext_rgmii_ref>;
+			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+		};
+
+		uart0: serial@40060000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x40060000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&sysctrl 146>;
+			clock-names = "baudclk";
+			status = "disabled";
+		};
+
+		gic: gic@44101000 {
+			compatible = "arm,cortex-a7-gic", "arm,gic-400";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x44101000 0x1000>, /* Distributer */
+			      <0x44102000 0x2000>, /* CPU interface */
+			      <0x44104000 0x2000>, /* Virt interface control */
+			      <0x44106000 0x2000>; /* Virt CPU interface */
+			interrupts =
+				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	timer {
+		compatible = "arm,cortex-a7-timer",
+			     "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+		interrupts =
+			<GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index c095341..2a7e662 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index e2a0f57..0fd19f9 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 567a6a7..67f5720 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index ef1eabf..1c925f2 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
index d23ee6d..ce525b9 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 13e285c..b6a8a82 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 4d7057a..cd126b9 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 06523ca..2ab3c4b 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index 8ba9e06..375129b 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 00e05a6..45fd2b3 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index aa10caa..aa123f9 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts
index 1be9daa..5670b33f 100644
--- a/arch/arm/boot/dts/rk3228-evb.dts
+++ b/arch/arm/boot/dts/rk3228-evb.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 73e3845..4df7acc 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/rk3229.dtsi b/arch/arm/boot/dts/rk3229.dtsi
index 6fe6c15..cb7d3fa 100644
--- a/arch/arm/boot/dts/rk3229.dtsi
+++ b/arch/arm/boot/dts/rk3229.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "rk322x.dtsi"
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index be80e9a..cd8f2a3 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -80,6 +42,7 @@
 			reg = <0xf01>;
 			resets = <&cru SRST_CORE1>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 			enable-method = "psci";
 		};
 
@@ -89,6 +52,7 @@
 			reg = <0xf02>;
 			resets = <&cru SRST_CORE2>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 			enable-method = "psci";
 		};
 
@@ -98,6 +62,7 @@
 			reg = <0xf03>;
 			resets = <&cru SRST_CORE3>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 			enable-method = "psci";
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index b9418d1..6592c80 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 #include "rk3288-evb.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 56c266df..1678820 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 #include "rk3288-evb.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 39b61dc..97e4d55 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
@@ -232,7 +194,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			edp_out_panel: endpoint {
+			edp_out_panel: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&panel_in_edp>;
 			};
diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts
index 4140597..b1b56df 100644
--- a/arch/arm/boot/dts/rk3288-fennec.dts
+++ b/arch/arm/boot/dts/rk3288-fennec.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts
index 0195d97..0f3c29d 100644
--- a/arch/arm/boot/dts/rk3288-firefly-beta.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
index 5f1e336..f57f286 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device tree file for Firefly Rockchip RK3288 Core board
  * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index eab176e..58ea8be 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device tree file for Firefly Rockchip RK3288 Core board
  * Copyright (c) 2016 Randy Li <ayaka@soulik.info>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts
index 14271be..556ab42 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dts
+++ b/arch/arm/boot/dts/rk3288-firefly.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index b9e6f3a..a6ff7ea 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 4d923aa..504ab11 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-phycore-rdk.dts b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
index 985743f..7077c34 100644
--- a/arch/arm/boot/dts/rk3288-phycore-rdk.dts
+++ b/arch/arm/boot/dts/rk3288-phycore-rdk.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device tree file for Phytec PCM-947 carrier board
  * Copyright (C) 2017 PHYTEC Messtechnik GmbH
  * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index aaab2d1..c218dd5 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device tree file for Phytec phyCORE-RK3288 SoM
  * Copyright (C) 2017 PHYTEC Messtechnik GmbH
  * Author: Wadim Egorov <w.egorov@phytec.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/net/ti-dp83867.h>
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index c06d0f4..596435e 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2014, 2015 Andy Yan <andy.yan@rock-chips.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index e95215c..28972fb 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 51f36a1..5032548 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index 8ccc89d..6a30cad 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index 127488f..ceade59 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
index 280acea..eaf9216 100644
--- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Google Veyron (and derivatives) fragment for the  max98090 audio
  * codec and analog headphone jack.
  *
  * Copyright 2016 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 / {
diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts
index ed42552..5c94a33 100644
--- a/arch/arm/boot/dts/rk3288-veyron-brain.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Brain Rev 0 board device tree source
  *
  * Copyright 2014 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index b16d570..b54746d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron (and derivatives) board device tree source
  * Chromebook specific parts
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rockchip,rk808.h>
@@ -174,7 +137,7 @@
 			reg = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			edp_out_panel: endpoint {
+			edp_out_panel: endpoint@0 {
 				reg = <0>;
 				remote-endpoint = <&panel_in_edp>;
 			};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index d33f576..9d6814c 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Jaq Rev 1+ board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index cdea751..2ba8989 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Jerry Rev 3+ board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index f0994f0..1e0158a 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Mickey Rev 0 board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 4c5307e6..f95d0c5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Minnie Rev 0+ board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 995cff4..2950aad 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Pinky Rev 2 board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index 95e9bee..a457044 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron (and derivatives) fragment for sdmmc cards
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &io_domains {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index cc0b78c..e16421d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron Speedy Rev 1+ board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 6e5bd89..2075120 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Veyron (and derivatives) board device tree source
  *
  * Copyright 2015 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rockchip,rk808.h>
@@ -128,22 +91,26 @@
 
 &cpu0 {
 	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000 1400000
-		1704000 1350000
-		1608000 1300000
-		1512000 1250000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 216000  900000
-		 126000  900000
-	>;
+};
+
+/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
+&cpu_opp_table {
+	/delete-node/ opp-312000000;
+
+	opp-1512000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1608000000 {
+		opp-microvolt = <1300000>;
+	};
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1400000>;
+	};
 };
 
 &emmc {
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 14c896bf..4856a9f 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index d7e49d2..0840ffb 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
@@ -98,21 +60,7 @@
 			compatible = "arm,cortex-a12";
 			reg = <0x500>;
 			resets = <&cru SRST_CORE0>;
-			operating-points = <
-				/* KHz    uV */
-				1608000 1350000
-				1512000 1300000
-				1416000 1200000
-				1200000 1100000
-				1008000 1050000
-				 816000 1000000
-				 696000  950000
-				 600000  900000
-				 408000  900000
-				 312000  900000
-				 216000  900000
-				 126000  900000
-			>;
+			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -122,18 +70,84 @@
 			compatible = "arm,cortex-a12";
 			reg = <0x501>;
 			resets = <&cru SRST_CORE1>;
+			operating-points = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu2: cpu@502 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x502>;
 			resets = <&cru SRST_CORE2>;
+			operating-points = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
 		};
 		cpu3: cpu@503 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a12";
 			reg = <0x503>;
 			resets = <&cru SRST_CORE3>;
+			operating-points = <&cpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-126000000 {
+			opp-hz = /bits/ 64 <126000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-216000000 {
+			opp-hz = /bits/ 64 <216000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-696000000 {
+			opp-hz = /bits/ 64 <696000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1050000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1200000>;
+		};
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <1300000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1350000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 49584b6..d752dc6 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -1,44 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 70f0106..203d83e 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 76ea246..ed8f6ca 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -1,42 +1,4 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
new file mode 100644
index 0000000..575094e
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 based Galaxy Aries board device tree source
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "s5pv210.dtsi"
+
+/ {
+	compatible = "samsung,aries", "samsung,s5pv210";
+
+	aliases {
+		i2c6 = &i2c_pmic;
+		i2c9 = &i2c_fuel;
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000
+			0x40000000 0x10000000
+			0x50000000 0x08000000>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_gpio_rst>;
+		post-power-on-delay-ms = <500>;
+		power-off-delay-us = <500>;
+	};
+
+	i2c_pmic: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "maxim,max8998";
+			reg = <0x66>;
+			interrupt-parent = <&gph0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			max8998,pmic-buck1-default-dvs-idx = <1>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+							<&gph0 4 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
+							<1050000>, <950000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "LDO6";
+					regulator-min-microvolt = <1600000>;
+					regulator-max-microvolt = <3600000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					/* Till we get panel driver */
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC_2.8V_PDA";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_AF_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VGA_VDDIO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VGA_DVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_ISP_HOST_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VGA_AVDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VCC_3.0V_LCD";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					/* Till we get panel driver */
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-suspend-microvolt = <1250000>;
+					};
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vddint";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-suspend-microvolt = <1100000>;
+					};
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				cp32khz_reg: EN32KHz-CP {
+					regulator-name = "32KHz CP";
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+					regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+				};
+			};
+		};
+	};
+
+	i2c_fuel: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuelgauge@36 {
+			compatible = "maxim,max17040";
+			interrupt-parent = <&vic0>;
+			interrupts = <7>;
+			reg = <0x36>;
+		};
+	};
+};
+
+&fimd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	status = "okay";
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	display-timings {
+		timing-0 {
+			/* 480x800@60Hz */
+			clock-frequency = <25628040>;
+			hactive = <480>;
+			vactive = <800>;
+			hfront-porch = <16>;
+			hback-porch = <16>;
+			hsync-len = <2>;
+			vfront-porch = <28>;
+			vback-porch = <1>;
+			vsync-len = <2>;
+		};
+	};
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo8_reg>;
+	vusb_d-supply = <&ldo3_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&pinctrl0 {
+	wlan_bt_en: wlan-bt-en {
+		samsung,pins = "gpb-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-val = <1>;
+	};
+
+	wlan_gpio_rst: wlan-gpio-rst {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	wifi_host_wake: wifi-host-wake {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	tf_detect: tf-detect {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wifi_wake: wifi-wake {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+};
+
+&sdhci1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	max-frequency = <38400000>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
+	pinctrl-names = "default";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	status = "okay";
+
+	wlan@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gph2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	vbus-supply = <&safe1_sreg>;
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
new file mode 100644
index 0000000..ccf761b
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+	model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
+	compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
+
+	chosen {
+		stdout-path = &uart2;
+		/*
+		 * It's hard to change those parameters in stock bootloader,
+		 * since it requires special hardware/cable.
+		 * Let's hardocde bootargs for now, till u-boot port is finished,
+		 * with which it should be easier.
+		 */
+		bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		vol-down {
+			label = "volume_down";
+			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		vol-up {
+			label = "volume_up";
+			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
new file mode 100644
index 0000000..8422767
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+	model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
+	compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
+
+	chosen {
+		stdout-path = &uart2;
+		/*
+		 * It's hard to change those parameters in stock bootloader,
+		 * since it requires special hardware/cable.
+		 * Let's hardocde bootargs for now, till u-boot port is finished,
+		 * with which it should be easier.
+		 */
+		bootargs = "root=/dev/mmcblk2p1 rw rootwait ignore_loglevel earlyprintk";
+	};
+
+	nand_pwrseq: nand-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&massmemory_en>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "power";
+			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		vol-down {
+			label = "volume_down";
+			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		vol-up {
+			label = "volume_up";
+			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		home {
+			label = "home";
+			gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+	};
+};
+
+&pinctrl0 {
+	massmemory_en: massmemory-en {
+		samsung,pins = "gpj2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&nand_pwrseq>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 3a79fea..7f0c9d4 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -258,6 +258,8 @@
 	gph2: gph2 {
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h
index e57191f..1c01a6f 100644
--- a/arch/arm/boot/dts/sama5d2-pinfunc.h
+++ b/arch/arm/boot/dts/sama5d2-pinfunc.h
@@ -375,7 +375,7 @@
 #define PIN_PB22__GPIO			PINMUX_PIN(PIN_PB22, 0, 0)
 #define PIN_PB22__LCDDAT11		PINMUX_PIN(PIN_PB22, 1, 1)
 #define PIN_PB22__A11			PINMUX_PIN(PIN_PB22, 2, 1)
-#define PIN_PB22__TDO			PINMUX_PIN(PIN_PB22, 3, 1)
+#define PIN_PB22__TD0			PINMUX_PIN(PIN_PB22, 3, 1)
 #define PIN_PB22__TIOA2			PINMUX_PIN(PIN_PB22, 4, 2)
 #define PIN_PB22__FLEXCOM3_IO1		PINMUX_PIN(PIN_PB22, 5, 3)
 #define PIN_PB22__GMDC			PINMUX_PIN(PIN_PB22, 6, 3)
@@ -556,7 +556,7 @@
 #define PIN_PC14__LCDDAT6		PINMUX_PIN(PIN_PC14, 1, 2)
 #define PIN_PC14__GRX0			PINMUX_PIN(PIN_PC14, 2, 1)
 #define PIN_PC14__ISC_D5		PINMUX_PIN(PIN_PC14, 3, 1)
-#define PIN_PC14__TDO			PINMUX_PIN(PIN_PC14, 5, 2)
+#define PIN_PC14__TD0			PINMUX_PIN(PIN_PC14, 5, 2)
 #define PIN_PC14__A3			PINMUX_PIN(PIN_PC14, 6, 2)
 #define PIN_PC15			79
 #define PIN_PC15__GPIO			PINMUX_PIN(PIN_PC15, 0, 0)
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index eae5e1e..1408fa4 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -494,7 +494,7 @@
 				atmel,external-irqs = <47>;
 			};
 
-			pinctrl@fffff200 {
+			pinctrl: pinctrl@fffff200 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
@@ -1340,13 +1340,13 @@
 				};
 			};
 
-			rstc@fffffe00 {
+			reset_controller: rstc@fffffe00 {
 				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
 				clocks = <&clk32k>;
 			};
 
-			shutdown-controller@fffffe10 {
+			shutdown_controller: shutdown-controller@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
 				clocks = <&clk32k>;
@@ -1359,7 +1359,7 @@
 				clocks = <&mck>;
 			};
 
-			watchdog@fffffe40 {
+			watchdog: watchdog@fffffe40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 0cf9bed..92a35a1 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -392,7 +392,7 @@
 			};
 
 			pmc: pmc@f0018000 {
-				compatible = "atmel,sama5d3-pmc", "syscon";
+				compatible = "atmel,sama5d4-pmc", "syscon";
 				reg = <0xf0018000 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 3d65f1f..daac0c6 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the KZM-A9-GT board
  *
@@ -5,10 +6,6 @@
  *
  * Based on sh73a0-kzm9g.dts
  * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index c953648..e8f0a07 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the SH73A0 SoC
  *
  * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/sh73a0-clock.h>
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 791ca15..a4dcb68 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -587,6 +587,18 @@
 			status = "disabled";
 		};
 
+		spi0: spi@ffda4000 {
+			compatible = "snps,dw-apb-ssi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xffda4000 0x100>;
+			interrupts = <0 101 4>;
+			num-cs = <4>;
+			/*32bit_access;*/
+			clocks = <&spi_m_clk>;
+			status = "disabled";
+		};
+
 		spi1: spi@ffda5000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 733678b..fca76a6 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -661,7 +661,6 @@
 		reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
 		clocks = <&hclksmc>;
 		status = "okay";
-		timings = /bits/ 8 <0 0 0 0x10 0x0a 0>;
 
 		partition@0 {
 		label = "X-Loader(NAND)";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ede77e0..e35d782 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -302,7 +302,7 @@
 			interrupt-parent = <&exti>;
 			interrupts = <17 1>;
 			interrupt-names = "alarm";
-			st,syscfg = <&pwrcfg>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
 
@@ -310,6 +310,7 @@
 			compatible = "st,stm32-iwdg";
 			reg = <0x40003000 0x400>;
 			clocks = <&clk_lsi>;
+			clock-names = "lsi";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 1479e3e..f48d06a 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -297,7 +297,7 @@
 			interrupt-parent = <&exti>;
 			interrupts = <17 1>;
 			interrupt-names = "alarm";
-			st,syscfg = <&pwrcfg>;
+			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 4839db1..c485127 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -157,6 +157,52 @@
 				};
 			};
 
+			ethernet0_rgmii_pins_a: rgmii-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+					bias-disable;
+				};
+			};
+
+			ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+						 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+						 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+						 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+						 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+						 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+						 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+						 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+						 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+						 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+						 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+						 <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+						 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+						 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+						 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+				};
+			};
+
 			i2c1_pins_a: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -187,6 +233,19 @@
 				};
 			};
 
+			m_can1_pins_a: m-can1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+					slew-rate = <1>;
+					drive-push-pull;
+					bias-disable;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+					bias-disable;
+				};
+			};
+
 			pwm2_pins_a: pwm2-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -281,7 +340,6 @@
 			pins-are-numbered;
 			interrupt-parent = <&exti>;
 			st,syscfg = <&exti 0x60 0xff>;
-			status = "disabled";
 
 			gpioz: gpio@54004000 {
 				gpio-controller;
@@ -305,6 +363,21 @@
 					slew-rate = <0>;
 				};
 			};
+
+			spi1_pins_a: spi1-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+						 <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <1>;
+				};
+
+				pins2 {
+					pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+					bias-disable;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index ae33653..f77bea4 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -49,10 +49,27 @@
 	};
 };
 
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
 &rng1 {
 	status = "okay";
 };
 
+&rtc {
+	status = "okay";
+};
+
 &timers6 {
 	status = "okay";
 	timer@5 {
@@ -60,14 +77,6 @@
 	};
 };
 
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-};
-
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 9382d80..372bc2e 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -17,6 +17,26 @@
 
 	aliases {
 		serial0 = &uart4;
+		ethernet0 = &ethernet0;
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
 	};
 };
 
@@ -42,6 +62,12 @@
 	status = "okay";
 };
 
+&m_can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&m_can1_pins_a>;
+	status = "okay";
+};
+
 &qspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
@@ -67,6 +93,12 @@
 	};
 };
 
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "disabled";
+};
+
 &timers2 {
 	status = "disabled";
 	pwm {
@@ -103,6 +135,19 @@
 	};
 };
 
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
 &usbphyc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 7d17538..661be94 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -35,20 +35,6 @@
 		cpu_on = <0x84000003>;
 	};
 
-	aliases {
-		gpio0 = &gpioa;
-		gpio1 = &gpiob;
-		gpio2 = &gpioc;
-		gpio3 = &gpiod;
-		gpio4 = &gpioe;
-		gpio5 = &gpiof;
-		gpio6 = &gpiog;
-		gpio7 = &gpioh;
-		gpio8 = &gpioi;
-		gpio9 = &gpioj;
-		gpio10 = &gpiok;
-	};
-
 	intc: interrupt-controller@a0021000 {
 		compatible = "arm,cortex-a7-gic";
 		#interrupt-cells = <3>;
@@ -311,6 +297,34 @@
 			};
 		};
 
+		spi2: spi@4000b000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000b000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI2_K>;
+			resets = <&rcc SPI2_R>;
+			dmas = <&dmamux1 39 0x400 0x05>,
+			       <&dmamux1 40 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi3: spi@4000c000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x4000c000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI3_K>;
+			resets = <&rcc SPI3_R>;
+			dmas = <&dmamux1 61 0x400 0x05>,
+			       <&dmamux1 62 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		usart2: serial@4000e000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x4000e000 0x400>;
@@ -494,6 +508,34 @@
 			status = "disabled";
 		};
 
+		spi1: spi@44004000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44004000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI1_K>;
+			resets = <&rcc SPI1_R>;
+			dmas = <&dmamux1 37 0x400 0x05>,
+			       <&dmamux1 38 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		spi4: spi@44005000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44005000 0x400>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI4_K>;
+			resets = <&rcc SPI4_R>;
+			dmas = <&dmamux1 83 0x400 0x05>,
+			       <&dmamux1 84 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timers15: timer@44006000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -556,6 +598,116 @@
 			};
 		};
 
+		spi5: spi@44009000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x44009000 0x400>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI5_K>;
+			resets = <&rcc SPI5_R>;
+			dmas = <&dmamux1 85 0x400 0x05>,
+			       <&dmamux1 86 0x400 0x05>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		dfsdm: dfsdm@4400d000 {
+			compatible = "st,stm32mp1-dfsdm";
+			reg = <0x4400d000 0x800>;
+			clocks = <&rcc DFSDM_K>;
+			clock-names = "dfsdm";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			dfsdm0: filter@0 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <0>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 101 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm1: filter@1 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <1>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 102 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm2: filter@2 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <2>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 103 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm3: filter@3 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <3>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 104 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm4: filter@4 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <4>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 91 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			dfsdm5: filter@5 {
+				compatible = "st,stm32-dfsdm-adc";
+				#io-channel-cells = <1>;
+				reg = <5>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&dmamux1 92 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		m_can1: can@4400e000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400e000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
+		m_can2: can@4400f000 {
+			compatible = "bosch,m_can";
+			reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+			clock-names = "hclk", "cclk";
+			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+			status = "disabled";
+		};
+
 		dma1: dma@48000000 {
 			compatible = "st,stm32-dma";
 			reg = <0x48000000 0x400>;
@@ -600,6 +752,57 @@
 			clocks = <&rcc DMAMUX>;
 		};
 
+		adc: adc@48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc@0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				dmas = <&dmamux1 9 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
+			adc2: adc@100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				dmas = <&dmamux1 10 0x400 0x01>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+		};
+
+		usbotg_hs: usb-otg@49000000 {
+			compatible = "snps,dwc2";
+			reg = <0x49000000 0x10000>;
+			clocks = <&rcc USBO_K>;
+			clock-names = "otg";
+			resets = <&rcc USBO_R>;
+			reset-names = "dwc2";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			g-rx-fifo-size = <256>;
+			g-np-tx-fifo-size = <32>;
+			g-tx-fifo-size = <128 128 64 64 64 64 32 32>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
 		rcc: rcc@50000000 {
 			compatible = "st,stm32mp1-rcc", "syscon";
 			reg = <0x50000000 0x1000>;
@@ -614,6 +817,11 @@
 			reg = <0x5000d000 0x400>;
 		};
 
+		syscfg: syscon@50020000 {
+			compatible = "st,stm32mp157-syscfg", "syscon";
+			reg = <0x50020000 0x400>;
+		};
+
 		lptimer2: timer@50021000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -709,6 +917,18 @@
 			status = "disabled";
 		};
 
+		hash1: hash@54002000 {
+			compatible = "st,stm32f756-hash";
+			reg = <0x54002000 0x400>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc HASH1>;
+			resets = <&rcc HASH1_R>;
+			dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>;
+			dma-names = "in";
+			dma-maxburst = <2>;
+			status = "disabled";
+		};
+
 		rng1: rng@54003000 {
 			compatible = "st,stm32-rng";
 			reg = <0x54003000 0x400>;
@@ -744,6 +964,36 @@
 			status = "disabled";
 		};
 
+		stmmac_axi_config_0: stmmac-axi-config {
+			snps,wr_osr_lmt = <0x7>;
+			snps,rd_osr_lmt = <0x7>;
+			snps,blen = <0 0 0 0 16 8 4>;
+		};
+
+		ethernet0: ethernet@5800a000 {
+			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
+			reg = <0x5800a000 0x2000>;
+			reg-names = "stmmaceth";
+			interrupts-extended = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth",
+				      "mac-clk-tx",
+				      "mac-clk-rx",
+				      "ethstp",
+				      "syscfg-clk";
+			clocks = <&rcc ETHMAC>,
+				 <&rcc ETHTX>,
+				 <&rcc ETHRX>,
+				 <&rcc ETHSTP>,
+				 <&rcc SYSCFG>;
+			st,syscon = <&syscfg 0x4>;
+			snps,mixed-burst;
+			snps,pbl = <2>;
+			snps,axi-config = <&stmmac_axi_config_0>;
+			snps,tso;
+			status = "disabled";
+		};
+
 		usbh_ohci: usbh-ohci@5800c000 {
 			compatible = "generic-ohci";
 			reg = <0x5800c000 0x1000>;
@@ -784,6 +1034,14 @@
 			status = "disabled";
 		};
 
+		iwdg2: watchdog@5a002000 {
+			compatible = "st,stm32mp1-iwdg";
+			reg = <0x5a002000 0x400>;
+			clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+			clock-names = "pclk", "lsi";
+			status = "disabled";
+		};
+
 		usbphyc: usbphyc@5a006000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -812,6 +1070,20 @@
 			status = "disabled";
 		};
 
+		spi6: spi@5c001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32h7-spi";
+			reg = <0x5c001000 0x400>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc SPI6_K>;
+			resets = <&rcc SPI6_R>;
+			dmas = <&mdma1 34 0x0 0x40008 0x0 0x0 0>,
+			       <&mdma1 35 0x0 0x40002 0x0 0x0 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2c4: i2c@5c002000 {
 			compatible = "st,stm32f7-i2c";
 			reg = <0x5c002000 0x400>;
@@ -825,6 +1097,15 @@
 			status = "disabled";
 		};
 
+		rtc: rtc@5c004000 {
+			compatible = "st,stm32mp1-rtc";
+			reg = <0x5c004000 0x400>;
+			clocks = <&rcc RTCAPB>, <&rcc RTC>;
+			clock-names = "pclk", "rtc_ck";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		i2c6: i2c@5c009000 {
 			compatible = "st,stm32f7-i2c";
 			reg = <0x5c009000 0x400>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 3a1c6b4..3d62a89 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -190,8 +190,8 @@
 		#size-cells = <1>;
 		ranges;
 
-		sram-controller@1c00000 {
-			compatible = "allwinner,sun4i-a10-sram-controller";
+		system-control@1c00000 {
+			compatible = "allwinner,sun4i-a10-system-control";
 			reg = <0x01c00000 0x30>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1001,6 +1001,27 @@
 			status = "disabled";
 		};
 
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>,
+				     <70>,
+				     <71>,
+				     <72>,
+				     <73>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
 		fe0: display-frontend@1e00000 {
 			compatible = "allwinner,sun4i-a10-display-frontend";
 			reg = <0x01e00000 0x20000>;
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 07f2248..8bfb366 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -114,8 +114,8 @@
 		#size-cells = <1>;
 		ranges;
 
-		sram-controller@1c00000 {
-			compatible = "allwinner,sun4i-a10-sram-controller";
+		system-control@1c00000 {
+			compatible = "allwinner,sun5i-a13-system-control";
 			reg = <0x01c00000 0x30>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -127,12 +127,13 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0 0x00000000 0xc000>;
-			};
 
-			emac_sram: sram-section@8000 {
-				compatible = "allwinner,sun4i-a10-sram-a3-a4";
-				reg = <0x8000 0x4000>;
-				status = "disabled";
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun5i-a13-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
 			};
 
 			sram_d: sram@10000 {
@@ -143,11 +144,26 @@
 				ranges = <0 0x00010000 0x1000>;
 
 				otg_sram: sram-section@0 {
-					compatible = "allwinner,sun4i-a10-sram-d";
+					compatible = "allwinner,sun5i-a13-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
 					reg = <0x0000 0x1000>;
 					status = "disabled";
 				};
 			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun5i-a13-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
 		};
 
 		dma: dma-controller@1c02000 {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c729925..debc0bf 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -119,18 +119,48 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4f..9c52712 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -122,6 +122,19 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	1000000
+				>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -239,8 +252,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		sram-controller@1c00000 {
-			compatible = "allwinner,sun4i-a10-sram-controller";
+		system-control@1c00000 {
+			compatible = "allwinner,sun7i-a20-system-control",
+				     "allwinner,sun4i-a10-system-control";
 			reg = <0x01c00000 0x30>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -254,7 +268,8 @@
 				ranges = <0 0x00000000 0xc000>;
 
 				emac_sram: sram-section@8000 {
-					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					compatible = "allwinner,sun7i-a20-sram-a3-a4",
+						     "allwinner,sun4i-a10-sram-a3-a4";
 					reg = <0x8000 0x4000>;
 					status = "disabled";
 				};
@@ -268,11 +283,26 @@
 				ranges = <0 0x00010000 0x1000>;
 
 				otg_sram: sram-section@0 {
-					compatible = "allwinner,sun4i-a10-sram-d";
+					compatible = "allwinner,sun7i-a20-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
 					reg = <0x0000 0x1000>;
 					status = "disabled";
 				};
 			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun7i-a20-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
 		};
 
 		nmi_intc: interrupt-controller@1c00030 {
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 44f3cad..c16ffcc 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -124,6 +124,28 @@
 		#size-cells = <1>;
 		ranges;
 
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-a23-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-a23-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
 		dma: dma-controller@1c02000 {
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 8d278ee..4e92741 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -132,21 +132,30 @@
 		};
 
 		cpu@1 {
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 36eceba..1c012a4 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -79,6 +79,14 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
index 3b579d7..c7ce415 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -107,6 +107,14 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index 88decb07..e5f0645 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -145,6 +145,14 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&cpu100 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
 &ehci0 {
 	/* GL830 USB-to-SATA bridge here */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 2be23d6..00a02b0 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -902,8 +902,6 @@
 			reset-names = "stmmaceth";
 			clocks = <&ccu 27>;
 			clock-names = "stmmaceth";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 
 			mdio: mdio {
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 7d01f93..1db2541 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -48,6 +48,23 @@
 		};
 	};
 
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0x0
+			  1300000 0x1>;
+	};
+
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -55,6 +72,10 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &ehci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index cf1f970..5d23667 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -123,6 +123,13 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 41d57c7..f0096074 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -84,21 +84,30 @@
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
 			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -111,6 +120,28 @@
 	};
 
 	soc {
+		system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
 		mali: gpu@1c40000 {
 			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
 			reg = <0x01c40000 0x10000>;
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 25fb048..c39b916 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -94,6 +105,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci1 {
 	status = "okay";
 };
@@ -118,6 +133,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -226,6 +251,10 @@
 	regulator-name = "vcc-wifi";
 };
 
+&tcon_tv0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index bd97ca3..ffd9f00 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -42,8 +42,10 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r40-ccu.h>
 #include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
 
 / {
 	#address-cells = <1>;
@@ -99,12 +101,75 @@
 		};
 	};
 
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x100000>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
 		nmi_intc: interrupt-controller@1c00030 {
 			compatible = "allwinner,sun7i-a20-sc-nmi";
 			interrupt-controller;
@@ -474,8 +539,6 @@
 			reset-names = "stmmaceth";
 			clocks = <&ccu CLK_BUS_GMAC>;
 			clock-names = "stmmaceth";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 
 			gmac_mdio: mdio {
@@ -485,6 +548,213 @@
 			};
 		};
 
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
@@ -495,6 +765,51 @@
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>;
+			clock-names = "iahb", "isfr", "tmds";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "hdmi-phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy",
+				     "allwinner,sun50i-a64-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu 7>, <&ccu 16>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index c3bff11..fc613131 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -506,8 +506,6 @@
 			reset-names = "stmmaceth";
 			clocks = <&ccu CLK_BUS_EMAC>;
 			clock-names = "stmmaceth";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 
 			mdio: mdio {
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
index f7ffdd6..1eadc132 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -178,6 +178,15 @@
 	status = "okay";
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index eafff16..1788556b 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -23,7 +23,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 7ed7370e..3d38355 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -28,7 +28,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		/* memory >= 0x79600000 is reserved for firmware usage */
 		reg = <0x80000000 0x79600000>;
 	};
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index 7fc4a8b..bfdd1bf6 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -28,7 +28,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		/* memory >= 0x37e00000 is reserved for firmware usage */
 		reg = <0x80000000 0x37e00000>;
 	};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 84c4358..0d7a632 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -5,11 +5,16 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "nvidia,tegra114";
 	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x0>;
+	};
 
 	host1x@50000000 {
 		compatible = "nvidia,tegra114-host1x", "simple-bus";
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 3455822..573aaa5 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -15,7 +15,7 @@
 	compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
 		     "nvidia,tegra124";
 
-	memory {
+	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 9f960c8..0f0d4a4 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -50,7 +50,7 @@
 	model = "Toradex Apalis TK1";
 	compatible = "toradex,apalis-tk1", "nvidia,tegra124";
 
-	memory {
+	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 6dbcf84..9151b3e 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -24,7 +24,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 3609367037..d5f11d6d 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -13,7 +13,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 89bcc17..82d1396 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 174092b..183c5ac 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -7,14 +7,17 @@
 #include <dt-bindings/reset/tegra124-car.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "nvidia,tegra124";
 	interrupt-parent = <&lic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
 	pcie@1003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
similarity index 94%
rename from arch/arm/boot/dts/tegra20-iris-512.dts
rename to arch/arm/boot/dts/tegra20-colibri-iris.dts
index 4012638..57f16c0 100644
--- a/arch/arm/boot/dts/tegra20-iris-512.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -1,10 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include "tegra20-colibri-512.dtsi"
+#include "tegra20-colibri.dtsi"
 
 / {
-	model = "Toradex Colibri T20 512MB on Iris";
+	model = "Toradex Colibri T20 256/512 MB on Iris";
 	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
 
 	aliases {
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
similarity index 95%
rename from arch/arm/boot/dts/tegra20-colibri-512.dtsi
rename to arch/arm/boot/dts/tegra20-colibri.dtsi
index 5c202b3..e7b9ab0 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -2,7 +2,7 @@
 #include "tegra20.dtsi"
 
 / {
-	model = "Toradex Colibri T20 512MB";
+	model = "Toradex Colibri T20 256/512 MB";
 	compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
 
 	aliases {
@@ -10,8 +10,13 @@
 		rtc1 = "/rtc@7000e000";
 	};
 
-	memory {
-		reg = <0x00000000 0x20000000>;
+	memory@0 {
+		/*
+		 * Set memory to 256 MB to be safe as this could be used on
+		 * 256 or 512 MB module. It is expected from bootloader
+		 * to fix this up for 512 MB version.
+		 */
+		reg = <0x00000000 0x10000000>;
 	};
 
 	host1x@50000000 {
@@ -213,6 +218,22 @@
 			GPIO_ACTIVE_HIGH>;
 	};
 
+	nand-controller@70008000 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			nand-bus-width = <8>;
+			nand-on-flash-bbt;
+			nand-ecc-algo = "bch";
+			nand-is-boot-medium;
+			nand-ecc-maximize;
+			wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
 	/*
 	 * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
 	 * board)
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 628a55a..1d96d92 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 3043696..ef24529 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -19,7 +19,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x20000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 284aae3..f914416 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 872046d..20137fc 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -15,7 +15,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x20000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index d55c6b2..9eb26dc 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index ee3fbf9..f44551e 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		reg = <0x00000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 983dd5c..15b73bd 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -1,14 +1,20 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/clock/tegra20-car.h>
 #include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/memory/tegra20-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
 
 	iram@40000000 {
 		compatible = "mmio-sram";
@@ -282,7 +288,8 @@
 			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
 		interrupt-names = "sync-token", "bsev", "sxe";
 		clocks = <&tegra_car TEGRA20_CLK_VDE>;
-		resets = <&tegra_car 61>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
 	};
 
 	apbmisc@70000800 {
@@ -425,6 +432,21 @@
 		status = "disabled";
 	};
 
+	nand-controller@70008000 {
+		compatible = "nvidia,tegra20-nand";
+		reg = <0x70008000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		clock-names = "nand";
+		resets = <&tegra_car 13>;
+		reset-names = "nand";
+		assigned-clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+		assigned-clock-rates = <150000000>;
+		status = "disabled";
+	};
+
 	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra20-pwm";
 		reg = <0x7000a000 0x100>;
@@ -593,11 +615,12 @@
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	memory-controller@7000f000 {
+	mc: memory-controller@7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#reset-cells = <1>;
 	};
 
 	iommu@7000f024 {
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index d1d21ec..2f807d4 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -10,6 +10,10 @@
 	model = "Toradex Apalis T30";
 	compatible = "toradex,apalis_t30", "nvidia,tegra30";
 
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
 	pcie@3000 {
 		avdd-pexa-supply = <&vdd2_reg>;
 		vdd-pexa-supply = <&vdd2_reg>;
@@ -118,6 +122,7 @@
 				nvidia,function = "spi4";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
 			};
 			/* CAN_INT2 */
 			spi2_cs2_n_pw3 {
@@ -585,8 +590,6 @@
 		/* STMPE811 touch screen controller */
 		stmpe811@41 {
 			compatible = "st,stmpe811";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x41>;
 			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
 			interrupt-parent = <&gpio>;
@@ -595,7 +598,7 @@
 			blocks = <0x5>;
 			irq-trigger = <0x1>;
 
-			stmpe_touchscreen@0 {
+			stmpe_touchscreen {
 				compatible = "st,stmpe-ts";
 				/* 3.25 MHz ADC clock speed */
 				st,adc-freq = <1>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index ae52a50..b0d40ac 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -17,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x7ff00000>;
 	};
 
@@ -1790,9 +1790,6 @@
 			vccio-supply = <&vdd_5v_in_reg>;
 
 			regulators {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				vdd1_reg: vdd1 {
 					regulator-name = "vddio_ddr_1v2";
 					regulator-min-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 92a9740..fb9222b 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -40,7 +40,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
@@ -206,6 +206,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x70>;
+			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index c44d8c4..526ed71 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -10,7 +10,7 @@
 	model = "Toradex Colibri T30";
 	compatible = "toradex,colibri_t30", "nvidia,tegra30";
 
-	memory {
+	memory@80000000 {
 		reg = <0x80000000 0x40000000>;
 	};
 
@@ -351,8 +351,6 @@
 		/* STMPE811 touch screen controller */
 		stmpe811@41 {
 			compatible = "st,stmpe811";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x41>;
 			interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
 			interrupt-parent = <&gpio>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 09087b9..a6781f6 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -5,11 +5,16 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&lic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x0>;
+	};
 
 	pcie@3000 {
 		compatible = "nvidia,tegra30-pcie";
@@ -404,7 +409,8 @@
 			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
 		interrupt-names = "sync-token", "bsev", "sxe";
 		clocks = <&tegra_car TEGRA30_CLK_VDE>;
-		resets = <&tegra_car 61>;
+		reset-names = "vde", "mc";
+		resets = <&tegra_car 61>, <&mc TEGRA30_MC_RESET_VDE>;
 	};
 
 	apbmisc@70000800 {
@@ -712,6 +718,7 @@
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
 		#iommu-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	fuse@7000f800 {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 641d961..e2d1a22 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -36,6 +36,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -46,6 +47,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -56,6 +58,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			operating-points-v2 = <&cpu_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
new file mode 100644
index 0000000..37777cf
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 CFU1 Board";
+	compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <1>;
+		};
+
+		led-fail {
+			label = "zii:red:fail";
+			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+
+		led-status {
+			label = "zii:green:status";
+			gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+
+		led-debug-a {
+			label = "zii:green:debug_a";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+
+		led-debug-b {
+			label = "zii:green:debug_b";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			max-brightness = <1>;
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu {
+		 compatible = "regulator-fixed";
+		 regulator-name = "vcc_3v3_mcu";
+		 regulator-min-microvolt = <3300000>;
+		 regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
+
+	m25p128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6085";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			reg = <0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	pca9554@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	at24c04@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+		label = "nvm";
+	};
+
+	at24c04@54 {
+		compatible = "atmel,24c04";
+		reg = <0x54>;
+		label = "nameplate";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30fe
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+			VF610_PAD_PTE3__GPIO_108		0x31c2
+			VF610_PAD_PTE4__GPIO_109		0x31c2
+			VF610_PAD_PTE5__GPIO_110		0x31c2
+			VF610_PAD_PTE6__GPIO_111		0x31c2
+		>;
+	};
+
+	pinctrl_switch: switch-grp {
+		fsl,pins = <
+			VF610_PAD_PTB28__GPIO_98		0x3061
+			VF610_PAD_PTE2__GPIO_107		0x1042
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
new file mode 100644
index 0000000..fe35766
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Device tree file for ZII's SSMB SPU3 board
+ *
+ * SSMB - SPU3 Switch Management Board
+ * SPU - Seat Power Unit
+ *
+ * Copyright (C) 2015, 2016 Zodiac Inflight Innovations
+ *
+ * Based on an original 'vf610-twr.dts' which is Copyright 2015,
+ * Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "ZII VF610 SSMB SPU3 Board";
+	compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		led-debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			max-brightness = <1>;
+		};
+	};
+
+	reg_vcc_3v3_mcu: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_mcu";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&adc1 {
+	vref-supply = <&reg_vcc_3v3_mcu>;
+	status = "okay";
+};
+
+&dspi1 {
+	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	/*
+	 * Some SPU3s come with SPI-NOR chip DNPed, so we leave this
+	 * node disabled by default and rely on bootloader to enable
+	 * it when appropriate.
+	 */
+	status = "disabled";
+
+	m25p128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "m25p128-0";
+			reg = <0x0 0x01000000>;
+		};
+	};
+};
+
+&edma0 {
+	status = "okay";
+};
+
+&edma1 {
+	status = "okay";
+};
+
+&esdhc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc0>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch0: switch0@0 {
+			compatible = "marvell,mv88e6190";
+			pinctrl-0 = <&pinctrl_gpio_switch0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			eeprom-length = <65536>;
+			reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec1>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "eth_cu_1000_1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "eth_cu_1000_2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "eth_cu_1000_3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "eth_cu_1000_4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "eth_cu_1000_5";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "eth_cu_1000_6";
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	gpio6: pca9505@22 {
+		compatible = "nxp,pca9554";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	at24c04@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		label = "nameplate";
+	};
+
+	at24c04@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x1182
+			VF610_PAD_PTD4__DSPI1_CS1		0x1182
+			VF610_PAD_PTC6__DSPI1_SIN		0x1181
+			VF610_PAD_PTC7__DSPI1_SOUT		0x1182
+			VF610_PAD_PTC8__DSPI1_SCK		0x1182
+		>;
+	};
+
+	pinctrl_esdhc0: esdhc0grp {
+		fsl,pins = <
+			VF610_PAD_PTC0__ESDHC0_CLK		0x31ef
+			VF610_PAD_PTC1__ESDHC0_CMD		0x31ef
+			VF610_PAD_PTC2__ESDHC0_DAT0		0x31ef
+			VF610_PAD_PTC3__ESDHC0_DAT1		0x31ef
+			VF610_PAD_PTC4__ESDHC0_DAT2		0x31ef
+			VF610_PAD_PTC5__ESDHC0_DAT3		0x31ef
+			VF610_PAD_PTD23__ESDHC0_DAT4		0x31ef
+			VF610_PAD_PTD22__ESDHC0_DAT5		0x31ef
+			VF610_PAD_PTD21__ESDHC0_DAT6		0x31ef
+			VF610_PAD_PTD20__ESDHC0_DAT7		0x31ef
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKIN		0x30d1
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+		>;
+	};
+
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+		fsl,pins = <
+			VF610_PAD_PTE2__GPIO_107		0x31c2
+			VF610_PAD_PTB28__GPIO_98		0x219d
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_leds_debug: pinctrl-leds-debug {
+		fsl,pins = <
+			VF610_PAD_PTD3__GPIO_82			0x31c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x21a2
+			VF610_PAD_PTB11__UART0_RX		0x21a1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			VF610_PAD_PTB23__UART1_TX		0x21a2
+			VF610_PAD_PTB24__UART1_RX		0x21a1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
index 1a0f631..8b9ab9b 100644
--- a/arch/arm/boot/dts/zynq-cc108.dts
+++ b/arch/arm/boot/dts/zynq-cc108.dts
@@ -12,8 +12,8 @@
 /include/ "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx CC108 board";
 	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		ethernet0 = &gem0;
diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
index aa4a0b6..6ed84fb 100644
--- a/arch/arm/boot/dts/zynq-microzed.dts
+++ b/arch/arm/boot/dts/zynq-microzed.dts
@@ -7,8 +7,8 @@
 /include/ "zynq-7000.dtsi"
 
 / {
-	model = "Zynq MicroZED Development Board";
-	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+	model = "Avnet MicroZed board";
+	compatible = "avnet,zynq-microzed", "xlnx,zynq-microzed", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index c05f4b6..54592ae 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -12,7 +12,7 @@
 /include/ "zynq-7000.dtsi"
 
 / {
-	model = "Adapteva Parallella Board";
+	model = "Adapteva Parallella board";
 	compatible = "adapteva,parallella", "xlnx,zynq-7000";
 
 	aliases {
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index f2330b0..cc5a3dc 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -7,13 +7,14 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC702 Development Board";
+	model = "Xilinx ZC702 board";
 	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
@@ -28,8 +29,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw14 {
 			label = "sw14";
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 3ad1260..77943c1 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -7,13 +7,14 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZC706 Development Board";
+	model = "Xilinx ZC706 board";
 	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
 		i2c0 = &i2c0;
 		serial0 = &uart1;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
index 6884f1a..0e1bfdd 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM010 board";
 	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		ethernet0 = &gem0;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts
index b78883c..b7f6586 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm011.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM011 board";
 	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		i2c0 = &i2c1;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts
index c3169d6..d2359b7 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM012 board";
 	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		i2c0 = &i2c0;
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
index 8bb6685..651913f 100644
--- a/arch/arm/boot/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -8,8 +8,8 @@
 #include "zynq-7000.dtsi"
 
 / {
+	model = "Xilinx ZC770 XM013 board";
 	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
-	model = "Xilinx Zynq";
 
 	aliases {
 		ethernet0 = &gem1;
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 53c6883..6a5a93a 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -7,12 +7,13 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq Zed Development Board";
-	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+	model = "Avnet ZedBoard board";
+	compatible = "avnet,zynq-zed", "xlnx,zynq-zed", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
diff --git a/arch/arm/boot/dts/zynq-zturn.dts b/arch/arm/boot/dts/zynq-zturn.dts
new file mode 100644
index 0000000..b387046
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zturn.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
+ *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>
+ *
+ *  Based on zynq-zed.dts which is:
+ *  Copyright (C) 2011 - 2014 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ */
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq Z-Turn MYIR Board";
+	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		mmc0 = &sdhci0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		usr-led1 {
+			label = "usr-led1";
+			gpios = <&gpio0 0x0 0x1>;
+			default-state = "off";
+		};
+
+		usr-led2 {
+			label = "usr-led2";
+			gpios = <&gpio0 0x9 0x1>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		K1 {
+			label = "K1";
+			gpios = <&gpio0 0x32 0x1>;
+			linux,code = <0x66>;
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+};
+
+&clkc {
+	ps-clk-frequency = <33333333>;
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	stlm75@49 {
+		status = "okay";
+		compatible = "lm75";
+		reg = <0x49>;
+	};
+
+	accelerometer@53 {
+		compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
+		reg = <0x53>;
+		interrupt-parent = <&intc>;
+		interrupts = <0x0 0x1e 0x4>;
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts
index 1e713dc..357b78a 100644
--- a/arch/arm/boot/dts/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/zynq-zybo-z7.dts
@@ -1,9 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0+
 /dts-v1/;
 #include "zynq-7000.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Zynq ZYBO Z7 Development Board";
+	model = "Digilent Zybo Z7 board";
 	compatible = "digilent,zynq-zybo-z7", "xlnx,zynq-7000";
 
 	aliases {
@@ -13,7 +14,7 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x0 0x20000000>;
+		reg = <0x0 0x40000000>;
 	};
 
 	chosen {
@@ -21,10 +22,19 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		ld4 {
+			label = "zynq-zybo-z7:green:ld4";
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	usb_phy0: phy0 {
 		#phy-cells = <0>;
 		compatible = "usb-nop-xceiv";
-		reset-gpios = <&gpio0 46 1>;
+		reset-gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index a6c00e7..755f6f10 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -7,12 +7,13 @@
 #include "zynq-7000.dtsi"
 
 / {
-	model = "Zynq ZYBO Development Board";
+	model = "Digilent Zybo board";
 	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
 
 	aliases {
 		ethernet0 = &gem0;
 		serial0 = &uart1;
+		mmc0 = &sdhci0;
 	};
 
 	memory@0 {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e8f3d0f..32fae4d 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -684,15 +684,20 @@ static const struct pmc_info pmc_infos[] __initconst = {
 	{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
 	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
 	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
+	{ .uhp_udp_mask = 0 },
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
 	{ .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
 	{ .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] },
 	{ .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
 	{ /* sentinel */ },
 };
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index f34cd1b..35f2e6e 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -71,6 +71,13 @@
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
+config ARCH_K3
+	bool "Texas Instruments Inc. K3 multicore SoC architecture"
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  This enables support for Texas Instruments' K3 multicore SoC
+	  architecture.
+
 config ARCH_LAYERSCAPE
 	bool "ARMv8 based Freescale Layerscape SoC family"
 	select EDAC_SUPPORT
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 3543bc3..4690364 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -23,5 +23,6 @@
 subdir-y += socionext
 subdir-y += sprd
 subdir-y += synaptics
+subdir-y += ti
 subdir-y += xilinx
 subdir-y += zte
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index c31f90a..9ffa7a0 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,9 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
new file mode 100644
index 0000000..eac4793
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Amarula A64-Relic";
+	compatible = "amarula,a64-relic", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* WL-PMU-EN: PL2 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	/*
+	 * Schematic shows both dldo4 and eldo1 connected for vcc-io-wifi, but
+	 * dldo4 connection shows DNP(Do Not Populate) and eldo1 connected with
+	 * 0Ohm register to vcc-io-wifi so eldo1 is used.
+	 */
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>;	/* WL-WAKE-AP: PL3 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
+	};
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1040000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi-dsi-sensor";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-mipi";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+/*
+ * The A64 chip cannot work without this regulator off, although
+ * it seems to be only driving the AR100 core.
+ * Maybe we don't still know well about CPUs domain.
+ */
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+	usb0_vbus-supply = <&reg_drivevbus>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 0716b14..094cfed 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -296,6 +296,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index e2dce48..98dbff1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -195,6 +195,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 3b3081b..3f53139 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -214,6 +214,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index bf42690..1221764 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -191,6 +191,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index a758257..1b9b92e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -229,6 +229,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 /* On Euler connector */
 &spdif {
 	status = "disabled";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
new file mode 100644
index 0000000..897e60c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Pinebook";
+	compatible = "pine64,pinebook", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &rtl8723cs;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 0>;
+		brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
+		default-brightness-level = <2>;
+		enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+
+		framebuffer-lcd {
+			panel-supply = <&reg_dc1sw>;
+			dvdd25-supply = <&reg_dldo2>;
+			dvdd12-supply = <&reg_fldo1>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		lid_switch {
+			label = "Lid Switch";
+			gpios = <&r_pio 0 12 GPIO_ACTIVE_LOW>; /* PL12 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+	};
+};
+
+&ehci0 {
+	phys = <&usbphy 0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_dldo4>;
+	vqmmc-supply = <&reg_eldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8723cs: wifi@1 {
+		reg = <1>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&ohci0 {
+	phys = <&usbphy 0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp803: pmic@3a3 {
+		compatible = "x-powers,axp803";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+/* The ANX6345 eDP-bridge is on r_i2c */
+&r_i2c {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_i2c_pins_a>;
+	status = "okay";
+};
+
+#include "axp803.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-csi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pl";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pll-avcc";
+};
+
+&reg_dc1sw {
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpux";
+};
+
+/* DCDC3 is polyphased with DCDC2 */
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dcdc6 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-hdmi";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-edp";
+};
+
+&reg_dldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo4 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_eldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "cpvdd";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-1v8-csi";
+};
+
+&reg_fldo1 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vcc-1v2-hsic";
+};
+
+&reg_fldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_ldo_io0 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-usb";
+	status = "okay";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
+
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_ldo_io0>;
+	usb1_vbus-supply = <&reg_ldo_io0>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index abe179d..c21f233 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -134,6 +134,10 @@
 	regulator-name = "vcc-wifi";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 43418bd..6723b86 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -45,6 +45,8 @@
 
 #include "sun50i-a64.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -52,6 +54,7 @@
 	non-removable;
 	disable-wp;
 	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 	status = "okay";
 };
 
@@ -66,6 +69,18 @@
 	};
 };
 
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
 #include "axp803.dtsi"
 
 &reg_aldo2 {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index d9baab3..81f8e00 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -38,6 +38,7 @@
 			gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
 			linux,input-type = <EV_SW>;
 			linux,code = <SW_LID>;
+			wakeup-source;
 		};
 	};
 
@@ -210,7 +211,7 @@
 &reg_dldo3 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
-	regulator-name = "eDP12";
+	regulator-name = "vdd-edp";
 };
 
 &reg_dldo4 {
@@ -253,6 +254,10 @@
 	regulator-name = "vcc-rtc";
 };
 
+&simplefb_hdmi {
+	vcc-hdmi-supply = <&reg_dldo1>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1b2ef28..d3daf90 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -43,9 +43,12 @@
  */
 
 #include <dt-bindings/clock/sun50i-a64-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/reset/sun8i-r-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -57,17 +60,21 @@
 		#size-cells = <1>;
 		ranges;
 
-/*
- * The pipeline mixer0-lcd0 depends on clock CLK_MIXER0 from DE2 CCU.
- * However there is no support for this clock on A64 yet, so we depend
- * on the upstream clocks here to keep them (and thus CLK_MIXER0) up.
- */
 		simplefb_lcd: framebuffer-lcd {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "mixer0-lcd0";
 			clocks = <&ccu CLK_TCON0>,
-				 <&ccu CLK_DE>, <&ccu CLK_BUS_DE>;
+				 <&display_clocks CLK_MIXER0>;
+			status = "disabled";
+		};
+
+		simplefb_hdmi: framebuffer-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer1-lcd1-hdmi";
+			clocks = <&display_clocks CLK_MIXER1>,
+				 <&ccu CLK_TCON1>, <&ccu CLK_HDMI>;
 			status = "disabled";
 		};
 	};
@@ -168,10 +175,46 @@
 		#size-cells = <1>;
 		ranges;
 
+		de2@1000000 {
+			compatible = "allwinner,sun50i-a64-de2";
+			reg = <0x1000000 0x400000>;
+			allwinner,sram = <&de2_sram 1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1000000 0x400000>;
+
+			display_clocks: clock@0 {
+				compatible = "allwinner,sun50i-a64-de2-clk";
+				reg = <0x0 0x100000>;
+				clocks = <&ccu CLK_DE>,
+					 <&ccu CLK_BUS_DE>;
+				clock-names = "mod",
+					      "bus";
+				resets = <&ccu RST_BUS_DE>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+		};
+
 		syscon: syscon@1c00000 {
-			compatible = "allwinner,sun50i-a64-system-controller",
-				"syscon";
+			compatible = "allwinner,sun50i-a64-system-control";
 			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@18000 {
+				compatible = "mmio-sram";
+				reg = <0x00018000 0x28000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00018000 0x28000>;
+
+				de2_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-a64-sram-c";
+					reg = <0x0000 0x28000>;
+				};
+			};
 		};
 
 		dma: dma-controller@1c02000 {
@@ -364,6 +407,11 @@
 				bias-pull-up;
 			};
 
+			pwm_pin: pwm_pin {
+				pins = "PD22";
+				function = "pwm";
+			};
+
 			rmii_pins: rmii_pins {
 				pins = "PD10", "PD11", "PD13", "PD14", "PD17",
 				       "PD18", "PD19", "PD20", "PD22", "PD23";
@@ -608,8 +656,6 @@
 			clocks = <&ccu CLK_BUS_EMAC>;
 			clock-names = "stmmaceth";
 			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
 
 			mdio: mdio {
 				compatible = "snps,dwmac-mdio";
@@ -629,11 +675,25 @@
 			#interrupt-cells = <3>;
 		};
 
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01c21400 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "rtc-osc32k", "rtc-osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
 		};
 
 		r_intc: interrupt-controller@1f00c00 {
@@ -655,6 +715,29 @@
 			#reset-cells = <1>;
 		};
 
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun50i-a64-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_APB0_I2C>;
+			resets = <&r_ccu RST_APB0_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun50i-a64-pwm",
+				     "allwinner,sun5i-a13-pwm";
+			reg = <0x01f03800 0x400>;
+			clocks = <&osc24M>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun50i-a64-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -666,6 +749,16 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			r_i2c_pins_a: i2c-a {
+				pins = "PL8", "PL9";
+				function = "s_i2c";
+			};
+
+			r_pwm_pin: pwm {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
 			r_rsb_pins: rsb {
 				pins = "PL0", "PL1";
 				function = "s_rsb";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
index 98862c7..3e0d5a9c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
@@ -207,6 +207,18 @@
 	status = "okay";
 };
 
+&spi0  {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index b6f2d6b..ceffc40 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -20,11 +20,157 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			label = "pine-h64:green:heartbeat";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		};
+
+		link {
+			label = "pine-h64:white:link";
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
+		};
+
+		status {
+			label = "pine-h64:blue:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
 };
 
 &r_i2c {
 	status = "okay";
 
+	axp805: pmic@36 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x36>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-ac200";
+			};
+
+			reg_aldo3: aldo3 {
+				/* This regulator is connected with CLDO1 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-io";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-dcxoio";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				/* This regulator is connected with ALDO3 */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-3v3-2";
+			};
+
+			reg_cldo2: cldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-1";
+			};
+
+			reg_cldo3: cldo3 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-wifi-2";
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <960000>;
+				regulator-max-microvolt = <960000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+
 	pcf8563: rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c72da8c..cfa5fff 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -5,7 +5,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
 #include <dt-bindings/reset/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -124,12 +126,71 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC1", "PC4", "PC5", "PC6",
+				       "PC7", "PC8", "PC9", "PC10",
+				       "PC11", "PC12", "PC13", "PC14";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			uart0_ph_pins: uart0-ph {
 				pins = "PH0", "PH1";
 				function = "uart0";
 			};
 		};
 
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h6-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h6-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -198,7 +259,7 @@
 			reg = <0x07022000 0x400>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -215,8 +276,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x07081400 0x400>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 8>;
-			resets = <&r_ccu 4>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_i2c_pins>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 67dac59..d033da4 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -119,6 +119,12 @@
 				#clock-cells = <0>;
 				compatible = "fixed-clock";
 			};
+
+			qspi_clk: qspi-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <200000000>;
+			};
 		};
 
 		gmac0: ethernet@ff800000 {
@@ -127,8 +133,8 @@
 			interrupts = <0 90 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
-			resets = <&rst EMAC0_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
 			clock-names = "stmmaceth";
 			status = "disabled";
@@ -140,8 +146,8 @@
 			interrupts = <0 91 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
-			resets = <&rst EMAC1_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
 			clock-names = "stmmaceth";
 			status = "disabled";
@@ -153,8 +159,8 @@
 			interrupts = <0 92 4>;
 			interrupt-names = "macirq";
 			mac-address = [00 00 00 00 00 00];
-			resets = <&rst EMAC2_RESET>;
-			reset-names = "stmmaceth";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
 			clock-names = "stmmaceth";
 			status = "disabled";
@@ -310,6 +316,7 @@
 			resets = <&rst SPIM0_RESET>;
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -322,6 +329,7 @@
 			resets = <&rst SPIM1_RESET>;
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -407,6 +415,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
 			status = "disabled";
 		};
 
@@ -418,6 +427,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr STRATIX10_USB_CLK>;
 			status = "disabled";
 		};
 
@@ -426,6 +436,7 @@
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 117 4>;
 			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -434,6 +445,7 @@
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 118 4>;
 			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -442,6 +454,7 @@
 			reg = <0xffd00400 0x100>;
 			interrupts = <0 125 4>;
 			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -450,6 +463,7 @@
 			reg = <0xffd00500 0x100>;
 			interrupts = <0 126 4>;
 			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr STRATIX10_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -464,5 +478,20 @@
 				interrupts = <16 4>, <48 4>;
 			};
 		};
+
+		qspi: spi@ff8d2000 {
+			compatible = "cdns,qspi-nor";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xff8d2000 0x100>,
+			      <0xff900000 0x100000>;
+			interrupts = <0 3 4>;
+			cdns,fifo-depth = <128>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index f9b1ef1..6edc4fa 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -147,3 +147,38 @@
 		reg = <0x68>;
 	};
 };
+
+&qspi {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q00a";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+
+		m25p,fast-read;
+		cdns,page-size = <256>;
+		cdns,block-size = <16>;
+		cdns,read-delay = <1>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			qspi_boot: partition@0 {
+				label = "Boot and fpga data";
+				reg = <0x0 0x4000000>;
+			};
+
+			qspi_rootfs: partition@4000000 {
+				label = "Root Filesystem - JFFS2";
+				reg = <0x4000000 0x4000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 34dd0e9..a97c0e2 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -17,6 +17,9 @@
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index dff9b15..d5c0142 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -6,21 +6,75 @@
 /dts-v1/;
 
 #include "meson-axg.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg";
 	model = "Amlogic Meson AXG S400 Development Board";
 
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-next {
+			label = "Next";
+			linux,code = <KEY_NEXT>;
+			press-threshold-microvolt = <1116000>; /* 62% */
+		};
+
+		button-prev {
+			label = "Previous";
+			linux,code = <KEY_PREVIOUS>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-wifi {
+			label = "Wifi";
+			linux,code = <KEY_WLAN>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-voice {
+			label = "Voice";
+			linux,code = <KEY_VOICECOMMAND>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
+
 	aliases {
 		serial0 = &uart_AO;
 		serial1 = &uart_A;
 	};
 
+	main_12v: regulator-main_12v {
+		compatible = "regulator-fixed";
+		regulator-name = "12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
 	};
 
 	vddao_3v3: regulator-vddao_3v3 {
@@ -28,6 +82,8 @@
 		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&main_12v>;
+		regulator-always-on;
 	};
 
 	vddio_ao18: regulator-vddio_ao18 {
@@ -35,6 +91,8 @@
 		regulator-name = "VDDIO_AO18";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
 	};
 
 	vcc_3v3: regulator-vcc_3v3 {
@@ -42,6 +100,30 @@
 		regulator-name = "VCC_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usb_pwr: regulator-usb_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v>;
+
+		gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
@@ -62,6 +144,66 @@
 		clock-frequency = <32768>;
 		pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
 	};
+
+	speaker-leds {
+		compatible = "gpio-leds";
+
+		aled1 {
+			label = "speaker:aled1";
+			gpios = <&gpio_speaker 7 0>;
+		};
+
+		aled2 {
+			label = "speaker:aled2";
+			gpios = <&gpio_speaker 6 0>;
+		};
+
+		aled3 {
+			label = "speaker:aled3";
+			gpios = <&gpio_speaker 5 0>;
+		};
+
+		aled4 {
+			label = "speaker:aled4";
+			gpios = <&gpio_speaker 4 0>;
+		};
+
+		aled5 {
+			label = "speaker:aled5";
+			gpios = <&gpio_speaker 3 0>;
+		};
+
+		aled6 {
+			label = "speaker:aled6";
+			gpios = <&gpio_speaker 2 0>;
+		};
+	};
+
+	linein: audio-codec@0 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7241";
+		VDDA-supply = <&vcc_3v3>;
+		VDDP-supply = <&vcc_3v3>;
+		VDDD-supply = <&vcc_3v3>;
+		status = "okay";
+		sound-name-prefix = "Linein";
+	};
+
+	lineout: audio-codec@1 {
+		#sound-dai-cells = <0>;
+		compatible = "everest,es7154";
+		VDD-supply = <&vcc_3v3>;
+		PVDD-supply = <&vcc_5v>;
+		status = "okay";
+		sound-name-prefix = "Lineout";
+	};
+
+	spdif_dit: audio-codec@2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
 };
 
 &ethmac {
@@ -106,12 +248,33 @@
 	status = "okay";
 	pinctrl-0 = <&i2c1_z_pins>;
 	pinctrl-names = "default";
+
+	speaker_amp1: audio-codec@1b {
+		compatible = "ti,tas5707";
+		reg = <0x1b>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&vcc_3v3>;
+		DVDD-supply = <&vcc_3v3>;
+		PVDD_A-supply = <&main_12v>;
+		PVDD_B-supply = <&main_12v>;
+		PVDD_C-supply = <&main_12v>;
+		PVDD_D-supply = <&main_12v>;
+	};
 };
 
 &i2c_AO {
 	status = "okay";
 	pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
 	pinctrl-names = "default";
+
+	gpio_speaker: gpio-controller@1f {
+		compatible = "nxp,pca9557";
+		reg = <0x1f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vddao_3v3>;
+	};
 };
 
 &pwm_ab {
@@ -166,3 +329,8 @@
 		compatible = "brcm,bcm4329-fmac";
 	};
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 67d7115..c518130 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
 #include <dt-bindings/clock/axg-clkc.h>
 #include <dt-bindings/clock/axg-aoclkc.h>
 #include <dt-bindings/gpio/meson-axg-gpio.h>
@@ -91,6 +92,39 @@
 		method = "smc";
 	};
 
+	tdmif_a: audio-controller@0 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_A";
+		clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_b: audio-controller@1 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_B";
+		clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
+	tdmif_c: audio-controller@2 {
+		compatible = "amlogic,axg-tdm-iface";
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TDM_C";
+		clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+			 <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+		clock-names = "mclk", "sclk", "lrclk";
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -155,6 +189,157 @@
 			};
 		};
 
+		audio: bus@ff642000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xff642000 0x0 0x2000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+			clkc_audio: clock-controller@0 {
+				compatible = "amlogic,axg-audio-clkc";
+				reg = <0x0 0x0 0x0 0xb4>;
+				#clock-cells = <1>;
+
+				clocks = <&clkc CLKID_AUDIO>,
+					 <&clkc CLKID_MPLL0>,
+					 <&clkc CLKID_MPLL1>,
+					 <&clkc CLKID_MPLL2>,
+					 <&clkc CLKID_MPLL3>,
+					 <&clkc CLKID_HIFI_PLL>,
+					 <&clkc CLKID_FCLK_DIV3>,
+					 <&clkc CLKID_FCLK_DIV4>,
+					 <&clkc CLKID_GP0_PLL>;
+				clock-names = "pclk",
+					      "mst_in0",
+					      "mst_in1",
+					      "mst_in2",
+					      "mst_in3",
+					      "mst_in4",
+					      "mst_in5",
+					      "mst_in6",
+					      "mst_in7";
+
+				resets = <&reset RESET_AUDIO>;
+			};
+
+			arb: reset-controller@280 {
+				compatible = "amlogic,meson-axg-audio-arb";
+				reg = <0x0 0x280 0x0 0x4>;
+				#reset-cells = <1>;
+				clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+			};
+
+			tdmin_a: audio-controller@300 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x300 0x0 0x40>;
+				sound-name-prefix = "TDMIN_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_b: audio-controller@340 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x340 0x0 0x40>;
+				sound-name-prefix = "TDMIN_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_c: audio-controller@380 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x380 0x0 0x40>;
+				sound-name-prefix = "TDMIN_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmin_lb: audio-controller@3c0 {
+				compatible = "amlogic,axg-tdmin";
+				reg = <0x0 0x3c0 0x0 0x40>;
+				sound-name-prefix = "TDMIN_LB";
+				clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			spdifout: audio-controller@480 {
+				compatible = "amlogic,axg-spdifout";
+				reg = <0x0 0x480 0x0 0x50>;
+				#sound-dai-cells = <0>;
+				sound-name-prefix = "SPDIFOUT";
+				clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+					 <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+				clock-names = "pclk", "mclk";
+				status = "disabled";
+			};
+
+			tdmout_a: audio-controller@500 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x500 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_A";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_b: audio-controller@540 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x540 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_B";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+
+			tdmout_c: audio-controller@580 {
+				compatible = "amlogic,axg-tdmout";
+				reg = <0x0 0x580 0x0 0x40>;
+				sound-name-prefix = "TDMOUT_C";
+				clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+					 <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+				clock-names = "pclk", "sclk", "sclk_sel",
+					      "lrclk", "lrclk_sel";
+				status = "disabled";
+			};
+		};
+
 		cbus: bus@ffd00000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xffd00000 0x0 0x25000>;
@@ -477,6 +662,48 @@
 					};
 				};
 
+				pdm_dclk_a14_pins: pdm_dclk_a14 {
+					mux {
+						groups = "pdm_dclk_a14";
+						function = "pdm";
+					};
+				};
+
+				pdm_dclk_a19_pins: pdm_dclk_a19 {
+					mux {
+						groups = "pdm_dclk_a19";
+						function = "pdm";
+					};
+				};
+
+				pdm_din0_pins: pdm_din0 {
+					mux {
+						groups = "pdm_din0";
+						function = "pdm";
+					};
+				};
+
+				pdm_din1_pins: pdm_din1 {
+					mux {
+						groups = "pdm_din1";
+						function = "pdm";
+					};
+				};
+
+				pdm_din2_pins: pdm_din2 {
+					mux {
+						groups = "pdm_din2";
+						function = "pdm";
+					};
+				};
+
+				pdm_din3_pins: pdm_din3 {
+					mux {
+						groups = "pdm_din3";
+						function = "pdm";
+					};
+				};
+
 				pwm_a_a_pins: pwm_a_a {
 					mux {
 						groups = "pwm_a_a";
@@ -561,6 +788,76 @@
 					};
 				};
 
+				spdif_in_z_pins: spdif_in_z {
+					mux {
+						groups = "spdif_in_z";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a1_pins: spdif_in_a1 {
+					mux {
+						groups = "spdif_in_a1";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a7_pins: spdif_in_a7 {
+					mux {
+						groups = "spdif_in_a7";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a19_pins: spdif_in_a19 {
+					mux {
+						groups = "spdif_in_a19";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_in_a20_pins: spdif_in_a20 {
+					mux {
+						groups = "spdif_in_a20";
+						function = "spdif_in";
+					};
+				};
+
+				spdif_out_z_pins: spdif_out_z {
+					mux {
+						groups = "spdif_out_z";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a1_pins: spdif_out_a1 {
+					mux {
+						groups = "spdif_out_a1";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a11_pins: spdif_out_a11 {
+					mux {
+						groups = "spdif_out_a11";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a19_pins: spdif_out_a19 {
+					mux {
+						groups = "spdif_out_a19";
+						function = "spdif_out";
+					};
+				};
+
+				spdif_out_a20_pins: spdif_out_a20 {
+					mux {
+						groups = "spdif_out_a20";
+						function = "spdif_out";
+					};
+				};
+
 				spi0_pins: spi0 {
 					mux {
 						groups = "spi0_miso",
@@ -1194,6 +1491,20 @@
 				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
+
+			saradc: adc@9000 {
+				compatible = "amlogic,meson-axg-saradc",
+					"amlogic,meson-saradc";
+				reg = <0x0 0x9000 0x0 0x38>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>,
+					<&clkc_AO CLKID_AO_SAR_ADC>,
+					<&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+					<&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+				clock-names = "clkin", "core", "adc_clk", "adc_sel";
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 88e712e..765247b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -35,6 +35,13 @@
 		regulator-always-on;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
 		regulator-name = "VDDIO_BOOT";
@@ -140,6 +147,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -160,11 +172,6 @@
 
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SD card */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 7d5709c..cbe99bd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -106,6 +106,42 @@
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
 	};
+
+	/* CVBS is available on CON1 pin 36, disabled by default */
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -137,6 +173,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
new file mode 100644
index 0000000..70433e0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S805X) P241 Development Board";
+
+	aliases {
+		serial0 = &uart_AO;
+		serial1 = &uart_A;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index a9f9bb9..15014fa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -41,13 +41,6 @@
 		};
 	};
 
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	hdmi-connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -108,7 +101,9 @@
 	};
 };
 
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
index 80a2314..92c425d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts
@@ -19,3 +19,10 @@
 	phy-mode = "rmii";
 	phy-handle = <&internal_phy>;
 };
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
new file mode 100644
index 0000000..6509c49
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "amlogic,p281", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Amlogic Meson GXL (S905W) P281 Development Board";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
new file mode 100644
index 0000000..789c819
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ * Based on meson-gxl-s905d-p231.dts:
+ * - Copyright (c) 2016 Endless Computers, Inc.
+ *   Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+
+/ {
+	compatible = "oranth,tx3-mini", "amlogic,s905w", "amlogic,meson-gxl";
+	model = "Oranth Tanix TX3 Mini";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 0868da4..313f88f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -209,10 +209,34 @@
 	#cooling-cells = <2>;
 };
 
+&cpu1 {
+	#cooling-cells = <2>;
+};
+
+&cpu2 {
+	#cooling-cells = <2>;
+};
+
+&cpu3 {
+	#cooling-cells = <2>;
+};
+
 &cpu4 {
 	#cooling-cells = <2>;
 };
 
+&cpu5 {
+	#cooling-cells = <2>;
+};
+
+&cpu6 {
+	#cooling-cells = <2>;
+};
+
+&cpu7 {
+	#cooling-cells = <2>;
+};
+
 &ethmac {
 	pinctrl-0 = <&eth_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index 1014172..73d656e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -40,13 +40,6 @@
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
 		};
 	};
-
-	vddio_ao18: regulator-vddio_ao18 {
-		compatible = "regulator-fixed";
-		regulator-name = "VDDIO_AO18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
 };
 
 /* Q200 has exclusive choice between internal or external PHY */
@@ -79,7 +72,9 @@
 	};
 };
 
-&saradc {
-	status = "okay";
-	vref-supply = <&vddio_ao18>;
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index 8d132b1..d02b80d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
@@ -19,3 +19,10 @@
 	phy-mode = "rmii";
 	phy-handle = <&internal_phy>;
 };
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/Makefile b/arch/arm64/boot/dts/broadcom/stingray/Makefile
index c4d06cf..20c7d0a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/Makefile
+++ b/arch/arm64/boot/dts/broadcom/stingray/Makefile
@@ -1,3 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742k.dtb
 dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958742t.dtb
+
+dtb-$(CONFIG_ARCH_BCM_IPROC) += bcm958802a802x.dtb
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index 8862ec9..bc299c3 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -30,20 +30,9 @@
  *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include "stingray.dtsi"
+#include "stingray-board-base.dtsi"
 
 / {
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart0;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
 	sdio0_vddo_ctrl_reg: sdio0_vddo_ctrl {
 		compatible = "regulator-gpio";
 		regulator-name = "sdio0_vddo_ctrl_reg";
@@ -67,11 +56,6 @@
 	};
 };
 
-&memory { /* Default DRAM banks */
-	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
-	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
-};
-
 &sata0 {
 	status = "okay";
 };
@@ -136,18 +120,6 @@
 	status = "okay";
 };
 
-&mdio_mux_iproc {
-	mdio@10 {
-		gphy0: eth-phy@10 {
-			reg = <0x10>;
-		};
-	};
-};
-
-&uart1 {
-	status = "okay";
-};
-
 &pwm {
 	status = "okay";
 };
@@ -175,8 +147,6 @@
 };
 
 &enet {
-	phy-mode = "rgmii-id";
-	phy-handle = <&gphy0>;
 	status = "okay";
 };
 
@@ -197,13 +167,10 @@
 
 &sdio0 {
 	vqmmc-supply = <&sdio0_vddo_ctrl_reg>;
-	non-removable;
-	full-pwr-cycle;
 	status = "okay";
 };
 
 &sdio1 {
 	vqmmc-supply = <&sdio1_vddo_ctrl_reg>;
-	full-pwr-cycle;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
new file mode 100644
index 0000000..a41facd
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+/dts-v1/;
+
+#include "stingray-board-base.dtsi"
+
+/ {
+	compatible = "brcm,bcm958802a802x", "brcm,stingray";
+	model = "Stingray PS225xx (BCM958802A802x)";
+};
+
+&enet {
+	status = "disabled";
+};
+
+&sdio0 {
+	no-1-8-v;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
new file mode 100644
index 0000000..82a2471
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *  Copyright(c) 2016-2018 Broadcom
+ */
+
+#include "stingray.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&memory { /* Default DRAM banks */
+	reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */
+	      <0x00000008 0x80000000 0x1 0x80000000>; /* 6G @ 34G */
+};
+
+&enet {
+	phy-mode = "rgmii-id";
+	phy-handle = <&gphy0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdio0 {
+	non-removable;
+	full-pwr-cycle;
+};
+
+&sdio1 {
+	full-pwr-cycle;
+};
+
+&mdio_mux_iproc {
+	mdio@10 {
+		gphy0: eth-phy@10 {
+			reg = <0x10>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index 3a4d452..10a106a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -52,12 +52,24 @@
 			reg = <0x0001d104 0x32>,
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll0", "clk_125", "clk_scr",
+			clock-output-names = "genpll0", "clk_125m", "clk_scr",
 					     "clk_250", "clk_pcie_axi",
 					     "clk_paxc_axi_x2",
 					     "clk_paxc_axi";
 		};
 
+		genpll2: genpll2@1d1ac {
+			#clock-cells = <1>;
+			compatible = "brcm,sr-genpll2";
+			reg = <0x0001d1ac 0x32>,
+			      <0x0001c854 0x4>;
+			clocks = <&osc>;
+			clock-output-names = "genpll2", "clk_nic",
+					     "clk_ts_500_ref", "clk_125_nitro",
+					     "clk_chimp", "clk_nic_flash",
+					     "clk_fs";
+		};
+
 		genpll3: genpll3@1d1e0 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll3";
@@ -75,8 +87,8 @@
 			      <0x0001c854 0x4>;
 			clocks = <&osc>;
 			clock-output-names = "genpll4", "clk_ccn",
-					     "clk_tpiu_pll", "noc_clk",
-					     "pll_chclk_fs4",
+					     "clk_tpiu_pll", "clk_noc",
+					     "clk_chclk_fs4",
 					     "clk_bridge_fscpu";
 		};
 
@@ -86,8 +98,8 @@
 			reg = <0x0001d248 0x32>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "genpll5", "fs4_hf_clk",
-					     "crypto_ae_clk", "raid_ae_clk";
+			clock-output-names = "genpll5", "clk_fs4_hf",
+					     "clk_crypto_ae", "clk_raid_ae";
 		};
 
 		lcpll0: lcpll0@1d0c4 {
@@ -107,9 +119,9 @@
 			reg = <0x0001d138 0x3c>,
 			      <0x0001c870 0x4>;
 			clocks = <&osc>;
-			clock-output-names = "lcpll1", "clk_wanpn",
+			clock-output-names = "lcpll1", "clk_wan",
 					     "clk_usb_ref",
-					     "timesync_evt_clk";
+					     "clk_crmu_ts";
 		};
 
 		hsls_clk: hsls_clk {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
new file mode 100644
index 0000000..33a472a
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+
+pcie8: pcie@60400000 {
+	compatible = "brcm,iproc-pcie-paxc-v2";
+	reg = <0 0x60400000 0 0x1000>;
+	linux,pci-domain = <8>;
+
+	bus-range = <0x0 0x1>;
+
+	#address-cells = <3>;
+	#size-cells = <2>;
+	device_type = "pci";
+	ranges = <0x83000000 0 0x10000000 0 0x10000000 0 0x20000000>;
+
+	dma-coherent;
+
+	msi-map = <0x100 &gic_its 0x2000 0x1>, /* PF0 */
+		  <0x108 &gic_its 0x2040 0x8>, /* PF0-VF0-7 */
+		  <0x101 &gic_its 0x2080 0x1>, /* PF1 */
+		  <0x110 &gic_its 0x20c8 0x8>, /* PF1-VF8-15 */
+		  <0x102 &gic_its 0x2100 0x1>, /* PF2 */
+		  <0x118 &gic_its 0x2150 0x8>, /* PF2-VF16-23 */
+		  <0x103 &gic_its 0x2180 0x1>, /* PF3 */
+		  <0x120 &gic_its 0x21d8 0x8>, /* PF3-VF24-31 */
+		  <0x104 &gic_its 0x2200 0x1>, /* PF4 */
+		  <0x128 &gic_its 0x2260 0x8>, /* PF4-VF32-39 */
+		  <0x105 &gic_its 0x2280 0x1>, /* PF5 */
+		  <0x130 &gic_its 0x22e8 0x8>, /* PF5-VF40-47 */
+		  <0x106 &gic_its 0x2300 0x1>, /* PF6 */
+		  <0x138 &gic_its 0x2370 0x8>, /* PF6-VF48-55 */
+		  <0x107 &gic_its 0x2380 0x1>, /* PF7 */
+		  <0x140 &gic_its 0x23f8 0x8>; /* PF7-VF56-63 */
+
+	phys = <&pcie_phy 8>;
+	phy-names = "pcie-phy";
+};
+
+pcie-ss {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x0 0x0 0x40000000 0x800>;
+
+	pcie_phy: phy@0 {
+		compatible = "brcm,sr-pcie-phy";
+		reg = <0x0 0x200>;
+		brcm,sr-cdru = <&cdru>;
+		brcm,sr-mhb = <&mhb>;
+		#phy-cells = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index a70e8dd..e283480 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -146,6 +146,11 @@
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	mhb: syscon@60401000 {
+		compatible = "brcm,sr-mhb", "syscon";
+		reg = <0 0x60401000 0 0x38c>;
+	};
+
 	scr {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -258,6 +263,18 @@
 
 		#include "stingray-clock.dtsi"
 
+		otp: otp@1c400 {
+			compatible = "brcm,ocotp-v2";
+			reg = <0x0001c400 0x68>;
+			brcm,ocotp-size = <2048>;
+			status = "okay";
+		};
+
+		cdru: syscon@1d000 {
+			compatible = "brcm,sr-cdru", "syscon";
+			reg = <0x0001d000 0x400>;
+		};
+
 		gpio_crmu: gpio@24800 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x00024800 0x4c>;
@@ -269,6 +286,7 @@
 
 	#include "stingray-fs4.dtsi"
 	#include "stingray-sata.dtsi"
+	#include "stingray-pcie.dtsi"
 
 	hsls {
 		compatible = "simple-bus";
@@ -420,6 +438,7 @@
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
 			clock-names = "wdogclk", "apb_pclk";
+			timeout-sec = <60>;
 		};
 
 		gpio_hsls: gpio@d0000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
deleted file mode 100644
index f080357..0000000
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <23>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_mux_addr = <6>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
deleted file mode 100644
index cccae66..0000000
--- a/arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5433 TMU sensor configuration
- *
- * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <150>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 038c997..2131f12 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -630,7 +630,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU0>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -641,7 +641,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU0>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -652,7 +652,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU1>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-g3d-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -663,7 +663,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU1>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -674,7 +674,7 @@
 			clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>,
 				<&cmu_peris CLK_SCLK_TMU1>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos5433-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -1171,7 +1171,7 @@
 			power-domains = <&pd_gscl>;
 		};
 
-		sysmmu_scaler_0: sysmmu@0x15040000 {
+		sysmmu_scaler_0: sysmmu@15040000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x15040000 0x1000>;
 			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
@@ -1182,7 +1182,7 @@
 			power-domains = <&pd_mscl>;
 		};
 
-		sysmmu_scaler_1: sysmmu@0x15050000 {
+		sysmmu_scaler_1: sysmmu@15050000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x15050000 0x1000>;
 			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
deleted file mode 100644
index 4849471..0000000
--- a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos7 TMU sensor configuration
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <9>;
-samsung,tmu_reference_voltage = <17>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <75>;
-samsung,tmu_min_efuse_value = <15>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 93a8433..75ad724 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -589,7 +589,7 @@
 			clocks = <&clock_peris PCLK_TMU>,
 				 <&clock_peris SCLK_TMU>;
 			clock-names = "tmu_apbif", "tmu_sclk";
-			#include "exynos7-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 		};
 
 		thermal-zones {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
index 7286b1e..f90c040 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS1012A Freedom Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
index cdc4aee..2fb1cb1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS1012A QDS Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index c1a119e..5edb1e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS1012A RDB Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 205f0f4..4c558a2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -1,45 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1012A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
index 169e171..6082ae0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043-post.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 device tree nodes for ls1043
  *
  * Copyright 2015-2016 Freescale Semiconductor Inc.
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &soc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 6341281..c7b8d2c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index 3dc0c8e..7b01ba8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 1109f22..b9f5d2f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1043A family SoC.
  *
  * Copyright 2014-2015 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <Mingkai.hu@freescale.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/thermal/thermal.h>
@@ -80,8 +43,8 @@
 			reg = <0x0>;
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
-			#cooling-cells = <2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -91,6 +54,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -100,6 +64,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -109,6 +74,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
index f5017db..d6caaea 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046-post.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 device tree nodes for ls1046
  *
  * Copyright 2015-2016 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &soc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
index 434383b..e69306e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Shaohui Xie <Shaohui.Xie@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 5dc2782..440e111 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 136ebfa..65ce1c3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -87,6 +50,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -96,6 +60,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -105,6 +70,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 3012805..6f48d21 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NXP LS1088A QDS Board.
  *
@@ -5,43 +6,6 @@
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 4f17601..8e925df 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NXP LS1088A RDB Board.
  *
@@ -5,43 +6,6 @@
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 1c6556b..a07f612 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for NXP Layerscape-1088A family SoC.
  *
@@ -5,43 +6,6 @@
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -76,6 +40,7 @@
 			reg = <0x1>;
 			clocks = <&clockgen 1 0>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -84,6 +49,7 @@
 			reg = <0x2>;
 			clocks = <&clockgen 1 0>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -92,6 +58,7 @@
 			reg = <0x3>;
 			clocks = <&clockgen 1 0>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu4: cpu@100 {
@@ -109,6 +76,7 @@
 			reg = <0x101>;
 			clocks = <&clockgen 1 1>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -117,6 +85,7 @@
 			reg = <0x102>;
 			clocks = <&clockgen 1 1>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -125,6 +94,7 @@
 			reg = <0x103>;
 			clocks = <&clockgen 1 1>;
 			cpu-idle-states = <&CPU_PH20>;
+			#cooling-cells = <2>;
 		};
 
 		CPU_PH20: cpu-ph20 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 3c99608..f6c3ee7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080a QDS Board.
  *
@@ -7,43 +8,6 @@
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
index a4e7de9..4489435 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080a RDB Board.
  *
@@ -7,43 +8,6 @@
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
index fbbb73e..5517305 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080a software Simulator model
  *
@@ -5,43 +6,6 @@
  *
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 8d73930..f9c1d30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
@@ -6,43 +7,6 @@
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  * Bhupesh Sharma <bhupesh.sharma@freescale.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "fsl-ls208xa.dtsi"
@@ -65,6 +29,7 @@
 		clocks = <&clockgen 1 0>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu2: cpu@100 {
@@ -84,6 +49,7 @@
 		clocks = <&clockgen 1 1>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu4: cpu@200 {
@@ -103,6 +69,7 @@
 		clocks = <&clockgen 1 2>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu6: cpu@300 {
@@ -122,6 +89,7 @@
 		clocks = <&clockgen 1 3>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cluster0_l2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
index eaee5b1..7c17b1b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2088A QDS Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
index c411442..f6b4d75 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2088A RDB Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index 0884e1a..7c882da 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-2088A family SoC.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "fsl-ls208xa.dtsi"
@@ -65,6 +29,7 @@
 		clocks = <&clockgen 1 0>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster0_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu2: cpu@100 {
@@ -84,6 +49,7 @@
 		clocks = <&clockgen 1 1>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster1_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu4: cpu@200 {
@@ -103,6 +69,7 @@
 		clocks = <&clockgen 1 2>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster2_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cpu6: cpu@300 {
@@ -122,6 +89,7 @@
 		clocks = <&clockgen 1 3>;
 		cpu-idle-states = <&CPU_PW20>;
 		next-level-cache = <&cluster3_l2>;
+		#cooling-cells = <2>;
 	};
 
 	cluster0_l2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 1de6188..c11f52e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080A QDS Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 061647b..6fd7f63 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Freescale LS2080A RDB Board.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 &esdhc {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 137ef4d..8cb78dd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
@@ -6,43 +7,6 @@
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
index ae15307..ff1aba5 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ BMan Portals device tree
  *
  * Copyright 2011-2016 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &bportals {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
index ecdffe7..dbd2fc3 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 10g port #0 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
index a7f6af5..6fc5d25 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-10g-1.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 10g port #1 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
index d600786..4e02276 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #0 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
index 3c0b76d..0312fa4 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-1.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #1 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
index 89633af..af2df07 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-2.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #2 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
index 87c2b70..4ac98dc 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-3.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #3 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
index 8f4d74b..bd932d8 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-4.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #4 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
index d534f77..7de1c52 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0-1g-5.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 1g port #5 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 4664c33..263b972 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ FMan v3 device tree
  *
  * Copyright 2012-2015 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 fman0: fman@1a00000 {
diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
index 6a93a4a..e3bec08 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * QorIQ QMan Portals device tree
  *
  * Copyright 2011-2016 Freescale Semiconductor Inc.
  *
- * SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
  */
 
 &qportals {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index 68c5a6c..c98bcbc 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -574,21 +574,35 @@
 };
 
 &dwmmc1 {
+	bus-width = <0x4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	disable-wp;
+	cd-inverted;
+	cd-gpios = <&gpio25 3 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd_pmx_func
+		     &sd_clk_cfg_func
+		     &sd_cfg_func>;
 	vmmc-supply = <&ldo16>;
 	vqmmc-supply = <&ldo9>;
 	status = "okay";
 };
 
 &dwmmc2 { /* WIFI */
+	bus-width = <0x4>;
+	non-removable;
 	broken-cd;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdio_pmx_func
+		     &sdio_clk_cfg_func
+		     &sdio_cfg_func>;
 	/* WL_EN */
 	vmmc-supply = <&wlan_en>;
-	ti,non-removable;
-	non-removable;
-	cap-power-off-card;
-	keep-power-in-suspend;
-	#address-cells = <0x1>;
-	#size-cells = <0x0>;
 	status = "ok";
 
 	wlcore: wlcore@2 {
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 851190a..f432b0a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -61,7 +61,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -75,7 +75,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -87,7 +87,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -99,7 +99,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>;
+			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <592>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>;
 			operating-points-v2 = <&cluster0_opp>;
@@ -111,7 +111,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -125,7 +125,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -137,7 +137,7 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -149,7 +149,7 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&A73_L2>;
-			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
+			cpu-idle-states = <&CPU_SLEEP_1 &CLUSTER_SLEEP_1>;
 			capacity-dmips-mhz = <1024>;
 			clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>;
 			operating-points-v2 = <&cluster1_opp>;
@@ -158,31 +158,40 @@
 		idle-states {
 			entry-method = "psci";
 
-			CPU_SLEEP: cpu-sleep {
+			CPU_SLEEP_0: cpu-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x0010000>;
-				entry-latency-us = <40>;
-				exit-latency-us = <70>;
-				min-residency-us = <3000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <650>;
+				min-residency-us = <1500>;
 			};
-
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x1010000>;
 				entry-latency-us = <500>;
-				exit-latency-us = <5000>;
-				min-residency-us = <20000>;
+				exit-latency-us = <1600>;
+				min-residency-us = <3500>;
+			};
+
+
+			CPU_SLEEP_1: cpu-sleep-1 {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <400>;
+				exit-latency-us = <550>;
+				min-residency-us = <1500>;
 			};
 
 			CLUSTER_SLEEP_1: cluster-sleep-1 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x1010000>;
-				entry-latency-us = <1000>;
-				exit-latency-us = <5000>;
-				min-residency-us = <20000>;
+				entry-latency-us = <800>;
+				exit-latency-us = <2900>;
+				min-residency-us = <3500>;
 			};
 		};
 
@@ -1020,16 +1029,10 @@
 
 		/* SD */
 		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			cd-inverted;
-			compatible = "hisilicon,hi3660-dw-mshc";
-			bus-width = <0x4>;
-			disable-wp;
-			cap-sd-highspeed;
-			supports-highspeed;
-			card-detect-delay = <200>;
-			reg = <0x0 0xff37f000 0x0 0x1000>;
 			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_SD>,
 				<&crg_ctrl HI3660_HCLK_GATE_SD>;
@@ -1037,29 +1040,17 @@
 			clock-frequency = <3200000>;
 			resets = <&crg_rst 0x94 18>;
 			reset-names = "reset";
-			cd-gpios = <&gpio25 3 0>;
 			hisilicon,peripheral-syscon = <&sctrl>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sd_pmx_func
-				     &sd_clk_cfg_func
-				     &sd_cfg_func>;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
+			card-detect-delay = <200>;
 			status = "disabled";
-
-			slot@0 {
-				reg = <0x0>;
-				bus-width = <4>;
-				disable-wp;
-			};
 		};
 
 		/* SDIO */
 		dwmmc2: dwmmc2@ff3ff000 {
 			compatible = "hisilicon,hi3660-dw-mshc";
 			reg = <0x0 0xff3ff000 0x0 0x1000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&crg_ctrl HI3660_CLK_GATE_SDIO0>,
 				 <&crg_ctrl HI3660_HCLK_GATE_SDIO0>;
@@ -1067,12 +1058,6 @@
 			resets = <&crg_rst 0x94 20>;
 			reset-names = "reset";
 			card-detect-delay = <200>;
-			supports-highspeed;
-			keep-power-in-suspend;
-			pinctrl-names = "default";
-			pinctrl-0 = <&sdio_pmx_func
-				     &sdio_clk_cfg_func
-				     &sdio_cfg_func>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 7f12624f..f4964be 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -323,7 +323,6 @@
 			bus-width = <0x4>;
 			non-removable;
 			cap-power-off-card;
-			keep-power-in-suspend;
 			vmmc-supply = <&reg_vdd_3v3>;
 			mmc-pwrseq = <&wl1835_pwrseq>;
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 586b281c..247024d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -88,8 +88,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			clocks = <&stub_clock 0>;
 			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <311>;
 		};
 
@@ -101,6 +101,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu2: cpu@2 {
@@ -111,6 +113,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu3: cpu@3 {
@@ -121,6 +125,8 @@
 			next-level-cache = <&CLUSTER0_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu4: cpu@100 {
@@ -131,6 +137,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu5: cpu@101 {
@@ -141,6 +149,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu6: cpu@102 {
@@ -151,6 +161,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		cpu7: cpu@103 {
@@ -161,6 +173,8 @@
 			next-level-cache = <&CLUSTER1_L2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+			#cooling-cells = <2>; /* min followed by max */
+			dynamic-power-coefficient = <311>;
 		};
 
 		CLUSTER0_L2: l2-cache0 {
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 3353252..d9531e2 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -22,6 +22,21 @@
 		serial1 = &uart1;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * The PSCI firmware region depicted below is the default one
+		 * and should be updated by the bootloader.
+		 */
+		psci-area@4000000 {
+			reg = <0 0x4000000 0 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -98,6 +113,12 @@
 				status = "disabled";
 			};
 
+			avs: avs@11500 {
+				compatible = "marvell,armada-3700-avs",
+					     "syscon";
+				reg = <0x11500 0x40>;
+			};
+
 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
 				reg = <0x12000 0x200>;
@@ -287,7 +308,7 @@
 			};
 
 			crypto: crypto@90000 {
-				compatible = "inside-secure,safexcel-eip97";
+				compatible = "inside-secure,safexcel-eip97ies";
 				reg = <0x90000 0x20000>;
 				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index a66958ff..56fa448 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -91,7 +91,7 @@
 	};
 
 	sfp_eth3: sfp-eth3 {
-		/* CON3,4 - CPS lane 5 */
+		/* CON13,14 - CPS lane 5 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfp_1g_i2c>;
 		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 1c6ff81..840c845 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -398,7 +398,7 @@
 		};
 
 		CP110_LABEL(crypto): crypto@800000 {
-			compatible = "inside-secure,safexcel-eip197";
+			compatible = "inside-secure,safexcel-eip197b";
 			reg = <0x800000 0x200000>;
 			interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
 				<ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index ac17f60..5b7fd6a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -3,5 +3,6 @@
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
new file mode 100644
index 0000000..742938a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for MediaTek X20 Development Board
+ *
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "mt6797.dtsi"
+
+/ {
+	model = "Mediatek X20 Development Board";
+	compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index b783764..a747b7b 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -18,7 +18,7 @@
 	compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
 
 	chosen {
-		bootargs = "console=ttyS0,115200n1 swiotlb=512";
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
 	};
 
 	cpus {
@@ -34,7 +34,7 @@
 	};
 
 	gpio-keys {
-		compatible = "gpio-keys-polled";
+		compatible = "gpio-keys";
 		poll-interval = <100>;
 
 		factory {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 9213c96..de2c47bd 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -89,6 +89,7 @@
 				 <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 			enable-method = "psci";
 			clock-frequency = <1300000000>;
 		};
@@ -286,9 +287,16 @@
 
 	pio: pinctrl@10211000 {
 		compatible = "mediatek,mt7622-pinctrl";
-		reg = <0 0x10211000 0 0x1000>;
+		reg = <0 0x10211000 0 0x1000>,
+		      <0 0x10005000 0 0x1000>;
+		reg-names = "base", "eint";
 		gpio-controller;
 		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 103>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
 	};
 
 	watchdog: watchdog@10212000 {
@@ -331,7 +339,7 @@
 		reg = <0 0x11002000 0 0x400>;
 		interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&topckgen CLK_TOP_UART_SEL>,
-			 <&pericfg CLK_PERI_UART1_PD>;
+			 <&pericfg CLK_PERI_UART0_PD>;
 		clock-names = "baud", "bus";
 		status = "disabled";
 	};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 94597e3..abd2f15 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -168,6 +168,7 @@
 			reg = <0x001>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
 			clocks = <&infracfg CLK_INFRA_CA53SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
@@ -193,6 +194,7 @@
 			reg = <0x101>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			#cooling-cells = <2>;
 			clocks = <&infracfg CLK_INFRA_CA57SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index ecb0341..57d3f00 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -27,15 +27,33 @@
 	};
 
 	cbb {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+		};
+
 		serial@3110000 {
 			status = "okay";
 		};
 
 		/* SDMMC1 (SD/MMC) */
 		sdhci@3400000 {
-/*
 			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
-*/
 		};
 
 		/* SDMMC4 (eMMC) */
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6322ef2..a4dfcd1 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -18,6 +18,45 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		gpio: gpio@2200000 {
+			compatible = "nvidia,tegra194-gpio";
+			reg-names = "security", "gpio";
+			reg = <0x2200000 0x10000>,
+			      <0x2210000 0x10000>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
+
+		ethernet@2490000 {
+			compatible = "nvidia,tegra186-eqos",
+				     "snps,dwc-qos-ethernet-4.10";
+			reg = <0x02490000 0x10000>;
+			interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_AXI_CBB>,
+				 <&bpmp TEGRA194_CLK_EQOS_AXI>,
+				 <&bpmp TEGRA194_CLK_EQOS_RX>,
+				 <&bpmp TEGRA194_CLK_EQOS_TX>,
+				 <&bpmp TEGRA194_CLK_EQOS_PTP_REF>;
+			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
+			resets = <&bpmp TEGRA194_RESET_EQOS>;
+			reset-names = "eqos";
+			status = "disabled";
+
+			snps,write-requests = <1>;
+			snps,read-requests = <3>;
+			snps,burst-map = <0x7>;
+			snps,txpbl = <16>;
+			snps,rxpbl = <8>;
+		};
+
 		uarta: serial@3100000 {
 			compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
 			reg = <0x03100000 0x40>;
@@ -329,6 +368,73 @@
 		};
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10000>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10001>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu@4 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu@5 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+
+		cpu@6 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10300>;
+			enable-method = "psci";
+		};
+
+		cpu@7 {
+			compatible = "nvidia,tegra194-carmel", "arm,armv8";
+			device_type = "cpu";
+			reg = <0x10301>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		status = "okay";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 9ff8487..78ce397 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -338,7 +338,7 @@
 			led@6 {
 				label = "apq8016-sbc:blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "bt";
+				linux,default-trigger = "bluetooth-power";
 				default-state = "off";
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 4d5ef01..0ef90c6 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -19,6 +19,33 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ *         NC      = not connected (pin out but not routed from the chip to
+ *                   anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         LSEC    = Low Speed External Connector
+ *         P HSEC  = Primary High Speed External Connector
+ *         S HSEC  = Secondary High Speed External Connector
+ *         J14     = Camera Connector
+ *         TP      = Test Points
+ *
+ * Line names are taken from the schematic "DragonBoard 820c",
+ * drawing no: LM25-P2751-1
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+
 / {
 	aliases {
 		serial0 = &blsp2_uart1;
@@ -130,6 +157,218 @@
 			status = "okay";
 		};
 
+		pinctrl@1010000 {
+			gpio-line-names =
+				"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+				"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+				"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+				"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+				"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+				"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+				"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+				"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
+				"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
+				"TP93", /* GPIO_9 */
+				"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
+				"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
+				"NC", /* GPIO_12 */
+				"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
+				"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
+				"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
+				"TP99", /* GPIO_16 */
+				"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
+				"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
+				"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
+				"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
+				"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
+				"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
+				"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
+				"GPIO-D", /* GPIO_24, LSEC pin 26 */
+				"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
+				"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
+				"BLSP6_I2C_SDA", /* GPIO_27 */
+				"BLSP6_I2C_SCL", /* GPIO_28 */
+				"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
+				"GPIO30", /* GPIO_30, S HSEC pin 4 */
+				"HDMI_CEC", /* GPIO_31 */
+				"HDMI_DDC_CLOCK", /* GPIO_32 */
+				"HDMI_DDC_DATA", /* GPIO_33 */
+				"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
+				"PCIE0_RST_N", /* GPIO_35 */
+				"PCIE0_CLKREQ_N", /* GPIO_36 */
+				"PCIE0_WAKE", /* GPIO_37 */
+				"SD_CARD_DET_N", /* GPIO_38 */
+				"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
+				"W_DISABLE_N", /* GPIO_40 */
+				"[BLSP9_UART_TX]", /* GPIO_41 */
+				"[BLSP9_UART_RX]", /* GPIO_42 */
+				"[BLSP2_UART_CTS_N]", /* GPIO_43 */
+				"[BLSP2_UART_RFR_N]", /* GPIO_44 */
+				"[BLSP3_UART_TX]", /* GPIO_45 */
+				"[BLSP3_UART_RX]", /* GPIO_46 */
+				"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
+				"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
+				"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
+				"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
+				"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
+				"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
+				"[CODEC_INT1_N]", /* GPIO_53 */
+				"[CODEC_INT2_N]", /* GPIO_54 */
+				"[BLSP7_I2C_SDA]", /* GPIO_55 */
+				"[BLSP7_I2C_SCL]", /* GPIO_56 */
+				"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
+				"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
+				"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
+				"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
+				"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
+				"GPIO-E", /* GPIO_62, LSEC pin 27 */
+				"TP87", /* GPIO_63 */
+				"[CODEC_RST_N]", /* GPIO_64 */
+				"[PCM1_CLK]", /* GPIO_65 */
+				"[PCM1_SYNC]", /* GPIO_66 */
+				"[PCM1_DIN]", /* GPIO_67 */
+				"[PCM1_DOUT]", /* GPIO_68 */
+				"AUDIO_REF_CLK", /* GPIO_69 */
+				"SLIMBUS_CLK", /* GPIO_70 */
+				"SLIMBUS_DATA0", /* GPIO_71 */
+				"SLIMBUS_DATA1", /* GPIO_72 */
+				"NC", /* GPIO_73 */
+				"NC", /* GPIO_74 */
+				"NC", /* GPIO_75 */
+				"NC", /* GPIO_76 */
+				"TP94", /* GPIO_77 */
+				"NC", /* GPIO_78 */
+				"TP95", /* GPIO_79 */
+				"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
+				"TP88", /* GPIO_81 */
+				"TP89", /* GPIO_82 */
+				"TP90", /* GPIO_83 */
+				"TP91", /* GPIO_84 */
+				"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
+				"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
+				"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
+				"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
+				"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
+				"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
+				"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
+				"NC", /* GPIO_92 */
+				"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
+				"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
+				"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
+				"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
+				"NC", /* GPIO_97 */
+				"CAM1_STANDBY_N", /* GPIO_98 */
+				"NC", /* GPIO_99 */
+				"NC", /* GPIO_100 */
+				"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
+				"BOOT_CONFIG1", /* GPIO_102 */
+				"USB_HUB_RESET", /* GPIO_103 */
+				"CAM1_RST_N", /* GPIO_104 */
+				"NC", /* GPIO_105 */
+				"NC", /* GPIO_106 */
+				"NC", /* GPIO_107 */
+				"NC", /* GPIO_108 */
+				"NC", /* GPIO_109 */
+				"NC", /* GPIO_110 */
+				"NC", /* GPIO_111 */
+				"NC", /* GPIO_112 */
+				"PMI8994_BUA", /* GPIO_113 */
+				"PCIE2_RST_N", /* GPIO_114 */
+				"PCIE2_CLKREQ_N", /* GPIO_115 */
+				"PCIE2_WAKE", /* GPIO_116 */
+				"SSC_IRQ_0", /* GPIO_117 */
+				"SSC_IRQ_1", /* GPIO_118 */
+				"SSC_IRQ_2", /* GPIO_119 */
+				"NC", /* GPIO_120 */
+				"GPIO121", /* GPIO_121, S HSEC pin 2 */
+				"NC", /* GPIO_122 */
+				"SSC_IRQ_6", /* GPIO_123 */
+				"SSC_IRQ_7", /* GPIO_124 */
+				"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
+				"BOOT_CONFIG5", /* GPIO_126 */
+				"NC", /* GPIO_127 */
+				"NC", /* GPIO_128 */
+				"BOOT_CONFIG7", /* GPIO_129 */
+				"PCIE1_RST_N", /* GPIO_130 */
+				"PCIE1_CLKREQ_N", /* GPIO_131 */
+				"PCIE1_WAKE", /* GPIO_132 */
+				"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
+				"NC", /* GPIO_134 */
+				"NC", /* GPIO_135 */
+				"BOOT_CONFIG8", /* GPIO_136 */
+				"NC", /* GPIO_137 */
+				"NC", /* GPIO_138 */
+				"GPS_SSBI2", /* GPIO_139 */
+				"GPS_SSBI1", /* GPIO_140 */
+				"NC", /* GPIO_141 */
+				"NC", /* GPIO_142 */
+				"NC", /* GPIO_143 */
+				"BOOT_CONFIG6", /* GPIO_144 */
+				"NC", /* GPIO_145 */
+				"NC", /* GPIO_146 */
+				"NC", /* GPIO_147 */
+				"NC", /* GPIO_148 */
+				"NC"; /* GPIO_149 */
+		};
+
+		qcom,spmi@400f000 {
+			pmic@0 {
+				gpios@c000 {
+					gpio-line-names =
+						"NC",
+						"KEY_VOLP_N",
+						"NC",
+						"BL1_PWM",
+						"GPIO-F", /* BL0_PWM, LSEC pin 28 */
+						"BL1_EN",
+						"NC",
+						"WLAN_EN",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"NC",
+						"DIVCLK1",
+						"DIVCLK2",
+						"DIVCLK3",
+						"DIVCLK4",
+						"BT_EN",
+						"PMIC_SLB",
+						"PMIC_BUA",
+						"USB_VBUS_DET";
+				};
+
+				mpps@a000 {
+					gpio-line-names =
+						"VDDPX_BIAS",
+						"WIFI_LED",
+						"NC",
+						"BT_LED",
+						"PM_MPP05",
+						"PM_MPP06",
+						"PM_MPP07",
+						"NC";
+				};
+			};
+
+			pmic@2 {
+				gpios@c000 {
+					gpio-line-names =
+						"NC",
+						"SPKR_AMP_EN1",
+						"SPKR_AMP_EN2",
+						"TP61",
+						"NC",
+						"USB2_VBUS_DET",
+						"NC",
+						"NC",
+						"NC",
+						"NC";
+				};
+			};
+		};
+
 		phy@34000 {
 			status = "okay";
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index c2625d1..7b32b89 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -858,9 +858,9 @@
 			clocks = <&gcc GCC_MDSS_AHB_CLK>,
 				 <&gcc GCC_MDSS_AXI_CLK>,
 				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface_clk",
-				      "bus_clk",
-				      "vsync_clk";
+			clock-names = "iface",
+				      "bus",
+				      "vsync";
 
 			interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
 
@@ -883,10 +883,10 @@
 					 <&gcc GCC_MDSS_AXI_CLK>,
 					 <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_VSYNC_CLK>;
-				clock-names = "iface_clk",
-					      "bus_clk",
-					      "core_clk",
-					      "vsync_clk";
+				clock-names = "iface",
+					      "bus",
+					      "core",
+					      "vsync";
 
 				iommus = <&apps_iommu 4>;
 
@@ -922,12 +922,12 @@
 					 <&gcc GCC_MDSS_BYTE0_CLK>,
 					 <&gcc GCC_MDSS_PCLK0_CLK>,
 					 <&gcc GCC_MDSS_ESC0_CLK>;
-				clock-names = "mdp_core_clk",
-					      "iface_clk",
-					      "bus_clk",
-					      "byte_clk",
-					      "pixel_clk",
-					      "core_clk";
+				clock-names = "mdp_core",
+					      "iface",
+					      "bus",
+					      "byte",
+					      "pixel",
+					      "core";
 				phys = <&dsi_phy0>;
 				phy-names = "dsi-phy";
 
@@ -963,7 +963,7 @@
 				#phy-cells = <0>;
 
 				clocks = <&gcc GCC_MDSS_AHB_CLK>;
-				clock-names = "iface_clk";
+				clock-names = "iface";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c7f9ca..cd3865e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -377,6 +377,22 @@
 			reg = <0x740000 0x20000>;
 		};
 
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@4ad000 {
+			compatible = "qcom,msm8996-tsens";
+			reg = <0x4ad000 0x1000>, /* TM */
+			      <0x4ac000 0x1000>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tcsr: syscon@7a0000 {
 			compatible = "qcom,tcsr-msm8996", "syscon";
 			reg = <0x7a0000 0x18000>;
@@ -459,12 +475,6 @@
 			status = "disabled";
 		};
 
-		tsens0: thermal-sensor@4a8000 {
-			compatible = "qcom,msm8996-tsens";
-			reg = <0x4a8000 0x2000>;
-			#thermal-sensor-cells = <1>;
-		};
-
 		blsp2_uart1: serial@75b0000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0x75b0000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8005.dtsi b/arch/arm64/boot/dts/qcom/pm8005.dtsi
new file mode 100644
index 0000000..4d5aca3
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8005.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	pm8005_lsid0: pmic@4 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x4 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8005_gpio: gpios@c000 {
+			compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>;
+		};
+
+	};
+
+	pm8005_lsid1: pmic@5 {
+		compatible = "qcom,pm8005", "qcom,spmi-pmic";
+		reg = <0x5 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
new file mode 100644
index 0000000..92bed1e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/* Copyright 2018 Google LLC. */
+
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&spmi_bus {
+	pm8998_lsid0: pmic@0 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8998_gpio: gpios@c000 {
+			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>,
+				     <0 0xcd 0 IRQ_TYPE_NONE>,
+				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xcf 0 IRQ_TYPE_NONE>,
+				     <0 0xd0 0 IRQ_TYPE_NONE>,
+				     <0 0xd1 0 IRQ_TYPE_NONE>,
+				     <0 0xd2 0 IRQ_TYPE_NONE>,
+				     <0 0xd3 0 IRQ_TYPE_NONE>,
+				     <0 0xd4 0 IRQ_TYPE_NONE>,
+				     <0 0xd5 0 IRQ_TYPE_NONE>,
+				     <0 0xd6 0 IRQ_TYPE_NONE>,
+				     <0 0xd7 0 IRQ_TYPE_NONE>,
+				     <0 0xd8 0 IRQ_TYPE_NONE>,
+				     <0 0xd9 0 IRQ_TYPE_NONE>;
+		};
+
+	};
+
+	pm8998_lsid1: pmic@1 {
+		compatible = "qcom,pm8998", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 979ab49..6d651f3 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -12,4 +12,49 @@
 / {
 	model = "Qualcomm Technologies, Inc. SDM845 MTP";
 	compatible = "qcom,sdm845-mtp";
+
+	aliases {
+		serial0 = &uart9;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_uart9_default {
+	pinconf-tx {
+		pins = "gpio4";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pinconf-rx {
+		pins = "gpio5";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cdaabeb..0c9a2aa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5,7 +5,10 @@
  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -13,6 +16,41 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+	};
+
 	chosen { };
 
 	memory@80000000 {
@@ -152,6 +190,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
@@ -206,6 +249,457 @@
 			#power-domain-cells = <1>;
 		};
 
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x8c0000 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x880000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x880000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x884000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x884000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x888000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x888000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x88c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x88c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x890000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x890000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x894000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x894000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@898000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x898000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@898000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x898000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@89c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x89c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@89c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x89c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_1: geniqup@ac0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0xac0000 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			status = "disabled";
+
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa80000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart9: serial@a84000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0xa84000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa88000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa8c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa90000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa94000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c14: i2c@a98000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa98000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@a98000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa98000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@a9c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0xa9c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@a9c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0xa9c000 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x1f40000 0x40000>;
@@ -219,6 +713,269 @@
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
+			qup_i2c0_default: qup-i2c0-default {
+				pinmux {
+					pins = "gpio0", "gpio1";
+					function = "qup0";
+				};
+			};
+
+			qup_i2c1_default: qup-i2c1-default {
+				pinmux {
+					pins = "gpio17", "gpio18";
+					function = "qup1";
+				};
+			};
+
+			qup_i2c2_default: qup-i2c2-default {
+				pinmux {
+					pins = "gpio27", "gpio28";
+					function = "qup2";
+				};
+			};
+
+			qup_i2c3_default: qup-i2c3-default {
+				pinmux {
+					pins = "gpio41", "gpio42";
+					function = "qup3";
+				};
+			};
+
+			qup_i2c4_default: qup-i2c4-default {
+				pinmux {
+					pins = "gpio89", "gpio90";
+					function = "qup4";
+				};
+			};
+
+			qup_i2c5_default: qup-i2c5-default {
+				pinmux {
+					pins = "gpio85", "gpio86";
+					function = "qup5";
+				};
+			};
+
+			qup_i2c6_default: qup-i2c6-default {
+				pinmux {
+					pins = "gpio45", "gpio46";
+					function = "qup6";
+				};
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				pinmux {
+					pins = "gpio93", "gpio94";
+					function = "qup7";
+				};
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				pinmux {
+					pins = "gpio65", "gpio66";
+					function = "qup8";
+				};
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				pinmux {
+					pins = "gpio6", "gpio7";
+					function = "qup9";
+				};
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				pinmux {
+					pins = "gpio55", "gpio56";
+					function = "qup10";
+				};
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				pinmux {
+					pins = "gpio31", "gpio32";
+					function = "qup11";
+				};
+			};
+
+			qup_i2c12_default: qup-i2c12-default {
+				pinmux {
+					pins = "gpio49", "gpio50";
+					function = "qup12";
+				};
+			};
+
+			qup_i2c13_default: qup-i2c13-default {
+				pinmux {
+					pins = "gpio105", "gpio106";
+					function = "qup13";
+				};
+			};
+
+			qup_i2c14_default: qup-i2c14-default {
+				pinmux {
+					pins = "gpio33", "gpio34";
+					function = "qup14";
+				};
+			};
+
+			qup_i2c15_default: qup-i2c15-default {
+				pinmux {
+					pins = "gpio81", "gpio82";
+					function = "qup15";
+				};
+			};
+
+			qup_spi0_default: qup-spi0-default {
+				pinmux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup0";
+				};
+			};
+
+			qup_spi1_default: qup-spi1-default {
+				pinmux {
+					pins = "gpio17", "gpio18",
+					       "gpio19", "gpio20";
+					function = "qup1";
+				};
+			};
+
+			qup_spi2_default: qup-spi2-default {
+				pinmux {
+					pins = "gpio27", "gpio28",
+					       "gpio29", "gpio30";
+					function = "qup2";
+				};
+			};
+
+			qup_spi3_default: qup-spi3-default {
+				pinmux {
+					pins = "gpio41", "gpio42",
+					       "gpio43", "gpio44";
+					function = "qup3";
+				};
+			};
+
+			qup_spi4_default: qup-spi4-default {
+				pinmux {
+					pins = "gpio89", "gpio90",
+					       "gpio91", "gpio92";
+					function = "qup4";
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				pinmux {
+					pins = "gpio85", "gpio86",
+					       "gpio87", "gpio88";
+					function = "qup5";
+				};
+			};
+
+			qup_spi6_default: qup-spi6-default {
+				pinmux {
+					pins = "gpio45", "gpio46",
+					       "gpio47", "gpio48";
+					function = "qup6";
+				};
+			};
+
+			qup_spi7_default: qup-spi7-default {
+				pinmux {
+					pins = "gpio93", "gpio94",
+					       "gpio95", "gpio96";
+					function = "qup7";
+				};
+			};
+
+			qup_spi8_default: qup-spi8-default {
+				pinmux {
+					pins = "gpio65", "gpio66",
+					       "gpio67", "gpio68";
+					function = "qup8";
+				};
+			};
+
+			qup_spi9_default: qup-spi9-default {
+				pinmux {
+					pins = "gpio6", "gpio7",
+					       "gpio4", "gpio5";
+					function = "qup9";
+				};
+			};
+
+			qup_spi10_default: qup-spi10-default {
+				pinmux {
+					pins = "gpio55", "gpio56",
+					       "gpio53", "gpio54";
+					function = "qup10";
+				};
+			};
+
+			qup_spi11_default: qup-spi11-default {
+				pinmux {
+					pins = "gpio31", "gpio32",
+					       "gpio33", "gpio34";
+					function = "qup11";
+				};
+			};
+
+			qup_spi12_default: qup-spi12-default {
+				pinmux {
+					pins = "gpio49", "gpio50",
+					       "gpio51", "gpio52";
+					function = "qup12";
+				};
+			};
+
+			qup_spi13_default: qup-spi13-default {
+				pinmux {
+					pins = "gpio105", "gpio106",
+					       "gpio107", "gpio108";
+					function = "qup13";
+				};
+			};
+
+			qup_spi14_default: qup-spi14-default {
+				pinmux {
+					pins = "gpio33", "gpio34",
+					       "gpio31", "gpio32";
+					function = "qup14";
+				};
+			};
+
+			qup_spi15_default: qup-spi15-default {
+				pinmux {
+					pins = "gpio81", "gpio82",
+					       "gpio83", "gpio84";
+					function = "qup15";
+				};
+			};
+
+			qup_uart9_default: qup-uart9-default {
+				pinmux {
+					pins = "gpio4", "gpio5";
+					function = "qup9";
+				};
+			};
+		};
+
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc263000 0x1ff>, /* TM */
+			      <0xc222000 0x1ff>; /* SROT */
+			#qcom,sensors = <13>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+			reg = <0xc265000 0x1ff>, /* TM */
+			      <0xc223000 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -246,6 +1003,29 @@
 			#mbox-cells = <1>;
 		};
 
+		apps_rsc: rsc@179c0000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x179c0000 0x10000>,
+			      <0x179d0000 0x10000>,
+			      <0x179e0000 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>,
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sdm845-rpmh-clk";
+				#clock-cells = <1>;
+			};
+		};
+
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
index 009cb1c..2f24dfc 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795-es1-h3ulcb.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
index dd4f9b6..598b981 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
index 3f46345..6b5fa91 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car H3 ES1.x
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
index e19dcd6..7b2fbae 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7795 ES1.x SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795.dtsi"
@@ -80,7 +77,7 @@
 
 	vspd3: vsp@fea38000 {
 		compatible = "renesas,vsp2";
-		reg = <0 0xfea38000 0 0x8000>;
+		reg = <0 0xfea38000 0 0x5000>;
 		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cpg CPG_MOD 620>;
 		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
index 4403227..80791ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7795-h3ulcb.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 0afe777..df50bf4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index 0efbef5..446822f 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car H3 ES2.0
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index e231b5a..8ded64d0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index d842940b..fb9d08a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7795 SoC
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
@@ -291,7 +288,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
 			clocks = <&cpg CPG_MOD 402>;
@@ -528,6 +525,15 @@
 			status = "disabled";
 		};
 
+		arm_cc630p: crypto@e6601000 {
+			compatible = "arm,cryptocell-630p-ree";
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0xe6601000 0 0x1000>;
+			clocks = <&cpg CPG_MOD 229>;
+			resets = <&cpg 229>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+		};
+
 		i2c3: i2c@e66d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -2530,7 +2536,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2541,7 +2547,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2552,7 +2558,7 @@
 
 		vspd2: vsp@fea30000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea30000 0 0x8000>;
+			reg = <0 0xfea30000 0 0x5000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
index de2390f..2df50eb 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the M3ULCB Kingfisher board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "r8a7796-m3ulcb.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index daee1f1..cbd8acb 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
index 90cca09..052d72a 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board with R-Car M3-W
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
index ddf35d4..8860be6 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 7c25be6..cbd35c0 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a7796 SoC
  *
- * Copyright (C) 2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * Copyright (C) 2016-2017 Renesas Electronics Corp.
  */
 
 #include <dt-bindings/clock/r8a7796-cpg-mssr.h>
@@ -269,7 +266,7 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
 			compatible = "renesas,r8a7796-wdt",
 				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
@@ -2108,13 +2105,57 @@
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a7796",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		imr-lx4@fe860000 {
@@ -2212,7 +2253,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2223,7 +2264,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2234,7 +2275,7 @@
 
 		vspd2: vsp@fea30000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea30000 0 0x8000>;
+			reg = <0 0xfea30000 0 0x5000>;
 			interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 621>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 486aeca..0cd4446 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -138,9 +138,14 @@
 		#size-cells = <2>;
 		ranges;
 
-		wdt0: watchdog@e6020000 {
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77965-wdt",
+				     "renesas,rcar-gen3-wdt";
 			reg = <0 0xe6020000 0 0x0c>;
-			/* placeholder */
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
 		};
 
 		gpio0: gpio@e6050000 {
@@ -451,6 +456,94 @@
 			status = "disabled";
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a77965",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
 		hsusb: usb@e6590000 {
 			compatible = "renesas,usbhs-r8a7796",
 				     "renesas,rcar-gen3-usbhs";
@@ -611,6 +704,95 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77965_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77965_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77965";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77965_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77965",
 				     "renesas,etheravb-rcar-gen3";
@@ -732,7 +914,7 @@
 			reg = <0 0xe6e60000 0 64>;
 			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 207>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
@@ -749,7 +931,7 @@
 			reg = <0 0xe6e68000 0 64>;
 			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 206>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
@@ -766,7 +948,7 @@
 			reg = <0 0xe6e88000 0 64>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 310>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -780,7 +962,7 @@
 			reg = <0 0xe6c50000 0 64>;
 			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 204>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
@@ -796,7 +978,7 @@
 			reg = <0 0xe6c40000 0 64>;
 			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 203>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
@@ -812,7 +994,7 @@
 			reg = <0 0xe6f30000 0 64>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 202>,
-				 <&cpg CPG_CORE 20>,
+				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
 			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
@@ -1176,6 +1358,9 @@
 				port@0 {
 					reg = <0>;
 				};
+				port@1 {
+					reg = <1>;
+				};
 			};
 		};
 
@@ -1340,13 +1525,57 @@
 		};
 
 		pciec0: pcie@fe000000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xfe000000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+				0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+				0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+				0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 319>;
+			status = "disabled";
 		};
 
 		pciec1: pcie@ee800000 {
+			compatible = "renesas,pcie-r8a77965",
+				     "renesas,pcie-rcar-gen3";
 			reg = <0 0xee800000 0 0x80000>;
-			/* placeholder */
+			#address-cells = <3>;
+			#size-cells = <2>;
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+				0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+				0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+				0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+			/* Map all possible DDR as inbound ranges */
+			dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+			clock-names = "pcie", "pcie_bus";
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
 		};
 
 		fcpf0: fcp@fe950000 {
@@ -1397,7 +1626,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -1416,7 +1645,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 21f9cf5..b6d5332 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Eagle board
  *
  * Copyright (C) 2016-2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 9fce031..8eac8ca 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the V3M Starter Kit board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 98a2317..9541688 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a77970 SoC
  *
  * Copyright (C) 2016-2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a77970-cpg-mssr.h>
@@ -776,7 +773,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 0b93a7d..9f25c40 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -59,6 +59,8 @@
 	phy0: ethernet-phy@0 {
 		rxc-skew-ps = <1500>;
 		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -80,6 +82,28 @@
 	clock-frequency = <32768>;
 };
 
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	io_expander0: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	io_expander1: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &mmc0 {
 	pinctrl-0 = <&mmc_pins>;
 	pinctrl-1 = <&mmc_pins_uhs>;
@@ -104,6 +128,11 @@
 		function = "canfd0";
 	};
 
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
 	mmc_pins: mmc {
 		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
 		function = "mmc";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index c968099..9dac42f 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &scif0;
+		ethernet0 = &gether;
 	};
 
 	chosen {
@@ -36,7 +37,29 @@
 	clock-frequency = <32768>;
 };
 
+&gether {
+	pinctrl-0 = <&gether_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy0>;
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &pfc {
+	gether_pins: gether {
+		groups = "gether_mdio_a", "gether_rgmii",
+			 "gether_txcrefclk", "gether_txcrefclk_mega";
+		function = "gether";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 4c40f9f..b8c9a56 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -16,6 +16,15 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -30,6 +39,36 @@
 			enable-method = "psci";
 		};
 
+		a53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <1>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <2>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
+		a53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <3>;
+			clocks = <&cpg CPG_CORE R8A77980_CLK_Z2>;
+			power-domains = <&sysc R8A77980_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
 		L2_CA53: cache-controller {
 			compatible = "cache";
 			power-domains = <&sysc R8A77980_PD_CA53_SCU>;
@@ -79,6 +118,96 @@
 		#size-cells = <2>;
 		ranges;
 
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 22>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 28>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 17>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 25>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a77980",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
 		pfc: pin-controller@e6060000 {
 			compatible = "renesas,pfc-r8a77980";
 			reg = <0 0xe6060000 0 0x50c>;
@@ -105,6 +234,118 @@
 			#power-domain-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a77980", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a77980",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>,
+			       <&dmac2 0x9b>, <&dmac2 0x9a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		hscif0: serial@e6540000 {
 			compatible = "renesas,hscif-r8a77980",
 				     "renesas,rcar-gen3-hscif",
@@ -202,6 +443,69 @@
 			};
 		};
 
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip0: mmu@e7b00000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7b00000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vip1: mmu@e7960000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe7960000 0 0x1000>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77980_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77980";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77980",
 				     "renesas,etheravb-rcar-gen3";
@@ -387,6 +691,18 @@
 			dma-channels = <16>;
 		};
 
+		gether: ethernet@e7400000 {
+			compatible = "renesas,gether-r8a77980";
+			reg = <0 0xe7400000 0 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		mmc0: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77980",
 				     "renesas,rcar-gen3-sdhi";
@@ -408,7 +724,7 @@
 			      <0x0 0xf1020000 0 0x20000>,
 			      <0x0 0xf1040000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x20000>;
-			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(1) |
+			interrupts = <GIC_PPI 9	(GIC_CPU_MASK_SIMPLE(4) |
 				      IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
@@ -416,6 +732,83 @@
 			resets = <&cpg 408>;
 		};
 
+		vspd0: vsp@fea20000 {
+			compatible = "renesas,vsp2";
+			reg = <0 0xfea20000 0 0x5000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 623>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 623>;
+			renesas,fcp = <&fcpvd0>;
+		};
+
+		fcpvd0: fcp@fea27000 {
+			compatible = "renesas,fcpv";
+			reg = <0 0xfea27000 0 0x200>;
+			clocks = <&cpg CPG_MOD 603>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 603>;
+		};
+
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a77980",
+				     "renesas,du-r8a77970";
+			reg = <0 0xfeb00000 0 0x80000>;
+			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 724>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 724>;
+			vsps = <&vspd0>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_rgb: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds-encoder@feb90000 {
+			compatible = "renesas,r8a77980-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint =
+							<&du_out_lvds0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
@@ -424,13 +817,13 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 				       IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 7a09d05..2bc3a48 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -47,10 +47,18 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &extal_clk {
 	clock-frequency = <48000000>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pfc {
 	avb_pins: avb {
 		mux {
@@ -58,8 +66,37 @@
 			function = "avb";
 		};
 	};
+
+	usb0_pins: usb {
+		groups = "usb0_b";
+		function = "usb0";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
 };
 
 &scif2 {
 	status = "okay";
 };
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index be4f519..ae89260 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/renesas-cpg-mssr.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a77990-sysc.h>
 
 / {
 	compatible = "renesas,r8a77990";
@@ -17,16 +18,24 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		/* 1 core only at this point */
 		a53_0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
-			reg = <0x0>;
+			reg = <0>;
 			device_type = "cpu";
 			power-domains = <&sysc 5>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
 		};
 
+		a53_1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <1>;
+			device_type = "cpu";
+			power-domains = <&sysc 6>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+		};
+
 		L2_CA53: cache-controller-0 {
 			compatible = "cache";
 			power-domains = <&sysc 21>;
@@ -44,8 +53,9 @@
 
 	pmu_a53 {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-affinity = <&a53_0>;
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>;
 	};
 
 	psci {
@@ -60,6 +70,16 @@
 		#size-cells = <2>;
 		ranges;
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a77990-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77990",
 				     "renesas,rcar-gen3-gpio";
@@ -191,10 +211,91 @@
 			#power-domain-cells = <1>;
 		};
 
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77990_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: mmu@fe990000 {
+			compatible = "renesas,ipmmu-r8a77990";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77990",
 				     "renesas,etheravb-rcar-gen3";
-			reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
+			reg = <0 0xe6800000 0 0x800>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
@@ -248,6 +349,54 @@
 			status = "disabled";
 		};
 
+		xhci0: usb@ee000000 {
+			compatible = "renesas,xhci-r8a77990",
+				     "renesas,rcar-gen3-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			status = "disabled";
+		};
+
+		ohci0: usb@ee080000 {
+			compatible = "generic-ohci";
+			reg = <0 0xee080000 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		ehci0: usb@ee080100 {
+			compatible = "generic-ehci";
+			reg = <0 0xee080100 0 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			phys = <&usb2_phy0>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			compatible = "renesas,usb2-phy-r8a77990",
+				     "renesas,rcar-gen3-usb2-phy";
+			reg = <0 0xee080200 0 0x700>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc 32>;
+			resets = <&cpg 703>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -258,7 +407,7 @@
 			      <0x0 0xf1040000 0 0x20000>,
 			      <0x0 0xf1060000 0 0x20000>;
 			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+					(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc 32>;
@@ -273,9 +422,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index 9d73de8..a8e8f26 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Draak board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /dts-v1/;
@@ -59,6 +56,27 @@
 		};
 	};
 
+	composite-in {
+		compatible = "composite-video-connector";
+
+		port {
+			composite_con_in: endpoint {
+				remote-endpoint = <&adv7180_in>;
+			};
+		};
+	};
+
+	hdmi-in {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&adv7612_in>;
+			};
+		};
+	};
+
 	memory@48000000 {
 		device_type = "memory";
 		/* first 128MB is reserved for secure area. */
@@ -82,6 +100,12 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	x12_clk: x12 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -142,6 +166,11 @@
 		groups = "usb0";
 		function = "usb0";
 	};
+
+	vin4_pins_cvbs: vin4 {
+		groups = "vin4_data8", "vin4_sync", "vin4_clk";
+		function = "vin4";
+	};
 };
 
 &i2c0 {
@@ -154,6 +183,77 @@
 		reg = <0x50>;
 		pagesize = <8>;
 	};
+
+	composite-in@20 {
+		compatible = "adi,adv7180cp";
+		reg = <0x20>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7180_in: endpoint {
+					remote-endpoint = <&composite_con_in>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, link it to
+				 * VIN4 here.
+				 */
+				adv7180_out: endpoint {
+					remote-endpoint = <&vin4_in>;
+				};
+			};
+		};
+
+	};
+
+	hdmi-decoder@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		default-input = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7612_in: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				/*
+				 * The VIN4 video input path is shared between
+				 * CVBS and HDMI inputs through SW[49-53]
+				 * switches.
+				 *
+				 * CVBS is the default selection, leave HDMI
+				 * not connected here.
+				 */
+				adv7612_out: endpoint {
+					pclk-sample = <0>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+				};
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -167,6 +267,11 @@
 	pinctrl-names = "default";
 	status = "okay";
 
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x12_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
 	ports {
 		port@0 {
 			endpoint {
@@ -246,3 +351,23 @@
 	timeout-sec = <60>;
 	status = "okay";
 };
+
+&vin4 {
+	pinctrl-0 = <&vin4_pins_cvbs>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			vin4_in: endpoint {
+				remote-endpoint = <&adv7180_out>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 2506f46..fe77bc4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the r8a77995 SoC
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2017 Glider bvba
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/clock/r8a77995-cpg-mssr.h>
@@ -88,8 +85,7 @@
 
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6050000 0 0x50>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -104,8 +100,7 @@
 
 		gpio1: gpio@e6051000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6051000 0 0x50>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -120,8 +115,7 @@
 
 		gpio2: gpio@e6052000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6052000 0 0x50>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -136,8 +130,7 @@
 
 		gpio3: gpio@e6053000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6053000 0 0x50>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -152,8 +145,7 @@
 
 		gpio4: gpio@e6054000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6054000 0 0x50>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -168,8 +160,7 @@
 
 		gpio5: gpio@e6055000 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055000 0 0x50>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -184,8 +175,7 @@
 
 		gpio6: gpio@e6055400 {
 			compatible = "renesas,gpio-r8a77995",
-				     "renesas,rcar-gen3-gpio",
-				     "renesas,gpio-rcar";
+				     "renesas,rcar-gen3-gpio";
 			reg = <0 0xe6055400 0 0x50>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 			#gpio-cells = <2>;
@@ -224,6 +214,18 @@
 			#power-domain-cells = <1>;
 		};
 
+		thermal: thermal@e6190000 {
+			compatible = "renesas,thermal-r8a77995";
+			reg = <0 0xe6190000 0 0x10>, <0 0xe6190100 0 0x38>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		intc_ex: interrupt-controller@e61c0000 {
 			compatible = "renesas,intc-ex-r8a77995", "renesas,irqc";
 			#interrupt-cells = <2>;
@@ -240,6 +242,41 @@
 			resets = <&cpg 407>;
 		};
 
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a77995",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@e6500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -408,6 +445,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -415,6 +453,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe7740000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -422,6 +461,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xe6570000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -430,6 +470,7 @@
 			reg = <0 0xe67b0000 0 0x1000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -437,6 +478,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xec670000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -444,6 +486,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfd800000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -451,6 +494,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xffc80000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 10>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -458,6 +502,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe6b0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -465,6 +510,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfebd0000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -472,6 +518,7 @@
 			compatible = "renesas,ipmmu-r8a77995";
 			reg = <0 0xfe990000 0 0x1000>;
 			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			#iommu-cells = <1>;
 		};
 
@@ -593,6 +640,40 @@
 			status = "disabled";
 		};
 
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 64>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 64>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
 		scif2: serial@e6e88000 {
 			compatible = "renesas,scif-r8a77995",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
@@ -610,6 +691,117 @@
 			status = "disabled";
 		};
 
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 64>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 64>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a77995",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 64>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A77995_CLK_S3D1C>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x64>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x64>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x64>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a77995",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x64>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		vin4: video@e6ef4000 {
 			compatible = "renesas,vin-r8a77995";
 			reg = <0 0xe6ef4000 0 0x1000>;
@@ -699,7 +891,7 @@
 
 		vspd0: vsp@fea20000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea20000 0 0x8000>;
+			reg = <0 0xfea20000 0 0x5000>;
 			interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 623>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -709,7 +901,7 @@
 
 		vspd1: vsp@fea28000 {
 			compatible = "renesas,vsp2";
-			reg = <0 0xfea28000 0 0x8000>;
+			reg = <0 0xfea28000 0 0x5000>;
 			interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 622>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -785,6 +977,25 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <120000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 9256fba..7d3d866 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for common parts of Salvator-X board variants
  *
  * Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 /*
@@ -36,7 +33,7 @@
 / {
 	aliases {
 		serial0 = &scif2;
-		serial1 = &scif1;
+		serial1 = &hscif1;
 		ethernet0 = &avb;
 	};
 
@@ -341,6 +338,15 @@
 	clock-frequency = <32768>;
 };
 
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	/* Please only enable hscif1 or scif1 */
+	status = "okay";
+};
+
 &hsusb {
 	dr_mode = "otg";
 	status = "okay";
@@ -440,7 +446,7 @@
 			};
 		};
 
-		port@10 {
+		port@a {
 			reg = <10>;
 
 			adv7482_txa: endpoint {
@@ -450,7 +456,7 @@
 			};
 		};
 
-		port@11 {
+		port@b {
 			reg = <11>;
 
 			adv7482_txb: endpoint {
@@ -546,6 +552,11 @@
 		function = "du";
 	};
 
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
 	i2c2_pins: i2c2 {
 		groups = "i2c2_a";
 		function = "i2c2";
@@ -589,13 +600,13 @@
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
 	};
@@ -711,7 +722,8 @@
 	pinctrl-names = "default";
 
 	uart-has-rtscts;
-	status = "okay";
+	/* Please only enable hscif1 or scif1 */
+	/* status = "okay"; */
 };
 
 &scif2 {
@@ -838,7 +850,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
index 468868c..ddee50e 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X board
  *
  * Copyright (C) 2015-2016 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "salvator-common.dtsi"
@@ -20,6 +17,8 @@
 };
 
 &i2c4 {
+	clock-frequency = <400000>;
+
 	versaclock5: clock-generator@6a {
 		compatible = "idt,5p49v5923";
 		reg = <0x6a>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
index bf4d200..717d427 100644
--- a/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-xs.dtsi
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Salvator-X 2nd version board
  *
  * Copyright (C) 2015-2017 Renesas Electronics Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include "salvator-common.dtsi"
@@ -20,6 +17,8 @@
 };
 
 &i2c4 {
+	clock-frequency = <400000>;
+
 	versaclock6: clock-generator@6a {
 		compatible = "idt,5p49v6901";
 		reg = <0x6a>;
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index a4e715c..8bf3091 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the Kingfisher (ULCB extension) board
  *
  * Copyright (C) 2017 Renesas Electronics Corp.
  * Copyright (C) 2017 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 0edb16e..0ead552 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the R-Car Gen3 ULCB board
  *
  * Copyright (C) 2016 Renesas Electronics Corp.
  * Copyright (C) 2016 Cogent Embedded, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -330,13 +327,13 @@
 	};
 
 	sdhi2_pins: sd2 {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <3300>;
 	};
 
 	sdhi2_pins_uhs: sd2_uhs {
-		groups = "sdhi2_data8", "sdhi2_ctrl";
+		groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 		function = "sdhi2";
 		power-source = <1800>;
 	};
@@ -447,7 +444,7 @@
 	status = "okay";
 };
 
-&wdt0 {
+&rwdt {
 	timeout-sec = <60>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 48a83f8..b0092d9 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,7 +9,9 @@
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 3d551e3..8302d86 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 2825772..5272e88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 PINE64
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b8e9da1..3f5a294 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rk3328-cru.h>
@@ -89,6 +52,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -100,6 +64,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -111,6 +76,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			clocks = <&cru ARMCLK>;
+			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
@@ -331,7 +297,7 @@
 		reg = <0x0 0xff120000 0x0 0x100>;
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
-		clock-names = "sclk_uart", "pclk_uart";
+		clock-names = "baudclk", "apb_pclk";
 		dmas = <&dmac 4>, <&dmac 5>;
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
index 8a5275f..160f2c7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
index a37220a..4de0891 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Caesar Wang <wxt@rock-chips.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
index 5e4d3a7..6b9b1ac 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index d3f6c8e..96147d9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
index 13a9e22..fc1bf07 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
index b3510d5..7452bed 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index ad91ced..9c24de1b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2015 Heiko Stuebner <heiko@sntech.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rk3368-cru.h>
@@ -113,7 +76,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -122,6 +84,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l2: cpu@2 {
@@ -129,6 +92,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l3: cpu@3 {
@@ -136,6 +100,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b0: cpu@100 {
@@ -143,7 +108,6 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
@@ -152,6 +116,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b2: cpu@102 {
@@ -159,6 +124,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b3: cpu@103 {
@@ -166,6 +132,7 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 56533c3..959ddc3 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
new file mode 100644
index 0000000..8978d92
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -0,0 +1,599 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
+ */
+
+/dts-v1/;
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+	model = "96boards RK3399 Ficus";
+	compatible = "vamrs,ficus", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc1v8_s0: vcc1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_s0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc3v3_pcie: vcc3v3-pcie-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_drv>;
+		regulator-boot-on;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_host: vcc5v0-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc5v0_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 0>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc3v3_sys>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <168>;
+	i2c-scl-falling-time-ns = <4>;
+	status = "okay";
+
+	vdd_cpu_b: regulator@40 {
+		compatible = "silergy,syr827";
+		reg = <0x40>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_b";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		status = "okay";
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_gpu: regulator@41 {
+		compatible = "silergy,syr828";
+		reg = <0x41>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1500000>;
+		regulator-ramp-delay = <1000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc_sys>;
+		vcc10-supply = <&vcc_sys>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc3v3_sys>;
+		vddio-supply = <&vcc_1v8>;
+
+		regulators {
+			vdd_center: DCDC_REG1 {
+				regulator-name = "vdd_center";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG4 {
+				regulator-name = "vcc_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc1v8_dvp: LDO_REG1 {
+				regulator-name = "vcc1v8_dvp";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_hdmi: LDO_REG2 {
+				regulator-name = "vcca1v8_hdmi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG3 {
+				regulator-name = "vcca_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_sd: LDO_REG4 {
+				regulator-name = "vcc_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc3v0_sd: LDO_REG5 {
+				regulator-name = "vcc3v0_sd";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1500000>;
+				};
+			};
+
+			vcca0v9_hdmi: LDO_REG7 {
+				regulator-name = "vcca0v9_hdmi";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcc_3v0: LDO_REG8 {
+				regulator-name = "vcc_3v0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3000000>;
+				};
+			};
+
+			vcc3v3_s3: SWITCH_REG1 {
+				regulator-name = "vcc3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_s0: SWITCH_REG2 {
+				regulator-name = "vcc3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&io_domains {
+	bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+	audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+	sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+	gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pmu_io_domains {
+	pmu1830-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&pinctrl {
+	gmac {
+		rgmii_sleep_pins: rgmii-sleep-pins {
+			rockchip,pins =
+				<3 15 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus1: sdmmc-bus1 {
+			rockchip,pins =
+				<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+				<4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+				<4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+				<4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins =
+				<4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins =
+				<4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+		};
+	};
+
+	pcie {
+		pcie_drv: pcie-drv {
+			rockchip,pins =
+				<1 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		vsel1_gpio: vsel1-gpio {
+			rockchip,pins =
+				<1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		vsel2_gpio: vsel2-gpio {
+			rockchip,pins =
+				<1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	usb2 {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins =
+				<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <100000 100000000>;
+	disable-wp;
+	sd-uhs-sdr104;
+	vqmmc-supply = <&vcc_sd>;
+	card-detect-delay = <800>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&tcphy1 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 2a35276..38336ab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -1,46 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
@@ -109,6 +73,39 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			debounce-interval = <100>;
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Key Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+		work-led {
+			label = "work";
+			default-state = "on";
+			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+		};
+
+		diy-led {
+			label = "diy";
+			default-state = "off";
+			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	rt5640-sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "rockchip,rt5640-codec";
@@ -529,19 +526,16 @@
 &i2s0 {
 	rockchip,playback-channels = <8>;
 	rockchip,capture-channels = <8>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
 &i2s1 {
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
 &i2s2 {
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
@@ -627,6 +621,16 @@
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	leds {
+		work_led_gpio: work_led-gpio {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		diy_led_gpio: diy_led-gpio {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm0 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
new file mode 100644
index 0000000..1ee0dc0
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Bob Rev 4+ board device tree source
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+/dts-v1/;
+#include "rk3399-gru-chromebook.dtsi"
+
+/ {
+	model = "Google Bob";
+	compatible = "google,bob-rev13", "google,bob-rev12",
+		     "google,bob-rev11", "google,bob-rev10",
+		     "google,bob-rev9", "google,bob-rev8",
+		     "google,bob-rev7", "google,bob-rev6",
+		     "google,bob-rev5", "google,bob-rev4",
+		     "google,bob", "google,gru", "rockchip,rk3399";
+
+	edp_panel: edp-panel {
+		compatible = "boe,nv101wxmn51", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&pp3300_disp>;
+
+		ports {
+			panel_in_edp: endpoint {
+				remote-endpoint = <&edp_out_panel>;
+			};
+		};
+	};
+};
+
+&ap_i2c_ts {
+	touchscreen: touchscreen@10 {
+		compatible = "elan,ekth3500";
+		reg = <0x10>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int_l &touch_reset_l>;
+		reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ap_i2c_tp {
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trackpad_int_l>;
+		wakeup-source;
+	};
+};
+
+&backlight {
+	pwms = <&cros_ec_pwm 0>;
+};
+
+&cpu_alert0 {
+	temperature = <65000>;
+};
+
+&cpu_alert1 {
+	temperature = <70000>;
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&pinctrl {
+	tpm {
+		h1_int_od_l: h1-int-od-l {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
new file mode 100644
index 0000000..ff81dfd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -0,0 +1,397 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Gru-Chromebook shared properties
+ *
+ * Copyright 2018 Google, Inc
+ */
+
+#include "rk3399-gru.dtsi"
+
+/ {
+	pp900_ap: pp900-ap {
+		compatible = "regulator-fixed";
+		regulator-name = "pp900_ap";
+
+		/* EC turns on w/ pp900_ap_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	/* EC turns on w/ pp900_usb_en */
+	pp900_usb: pp900-ap {
+	};
+
+	/* EC turns on w/ pp900_pcie_en */
+	pp900_pcie: pp900-ap {
+	};
+
+	pp3000: pp3000 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3000_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
+		compatible = "pwm-regulator";
+		regulator-name = "ppvar_centerlogic_pwm";
+
+		pwms = <&pwm3 0 3337 0>;
+		pwm-supply = <&ppvar_sys>;
+		pwm-dutycycle-range = <100 0>;
+		pwm-dutycycle-unit = <100>;
+
+		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+	};
+
+	ppvar_centerlogic: ppvar-centerlogic {
+		compatible = "vctrl-regulator";
+		regulator-name = "ppvar_centerlogic";
+
+		regulator-min-microvolt = <799434>;
+		regulator-max-microvolt = <1049925>;
+
+		ctrl-supply = <&ppvar_centerlogic_pwm>;
+		ctrl-voltage-range = <799434 1049925>;
+
+		regulator-settling-time-up-us = <378>;
+		min-slew-down-rate = <225>;
+		ovp-threshold-percent = <16>;
+	};
+
+	/* Schematics call this PPVAR even though it's fixed */
+	ppvar_logic: ppvar-logic {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_logic";
+
+		/* EC turns on w/ ppvar_logic_en; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp1800_audio: pp1800-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_audio_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* gpio is shared with pp3300_wifi_bt */
+	pp1800_pcie: pp1800-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_pcie";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_pd_l>;
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		/*
+		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
+		 * This has been approximated as 8ms total.
+		 */
+		regulator-enable-ramp-delay = <8000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	/* Always on; plain and simple */
+	pp3000_ap: pp3000_emmc: pp3000 {
+	};
+
+	pp1500_ap_io: pp1500-ap-io {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1500_ap_io";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1500_en>;
+
+		enable-active-high;
+		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+
+		vin-supply = <&pp1800>;
+	};
+
+	pp3300_disp: pp3300-disp {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_disp";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp3300_disp_en>;
+
+		enable-active-high;
+		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+
+		startup-delay-us = <2000>;
+		vin-supply = <&pp3300>;
+	};
+
+	/* EC turns on w/ pp3300_usb_en_l */
+	pp3300_usb: pp3300 {
+	};
+
+	/* gpio is shared with pp1800_pcie and pinctrl is set there */
+	pp3300_wifi_bt: pp3300-wifi-bt {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_wifi_bt";
+
+		enable-active-high;
+		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp3300>;
+	};
+
+	/*
+	 * This is a bit of a hack. The WiFi module should be reset at least
+	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
+	 * With some stretching of the imagination, we can call the 1.8V
+	 * regulator a supply.
+	 */
+	wlan_pd_n: wlan-pd-n {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
+
+		enable-active-high;
+		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+
+		vin-supply = <&pp1800_pcie>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+				     17 18 19 20 21 22 23 24 25 26 27 28 29 30
+				     31 32 33 34 35 36 37 38 39 40 41 42 43 44
+				     45 46 47 48 49 50 51 52 53 54 55 56 57 58
+				     59 60 61 62 63 64 65 66 67 68 69 70 71 72
+				     73 74 75 76 77 78 79 80 81 82 83 84 85 86
+				     87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
+		default-brightness-level = <51>;
+		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		power-supply = <&pp3300_disp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwm-delay-us = <10000>;
+	};
+};
+
+&ppvar_bigcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_litcpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&ppvar_gpu {
+	min-slew-down-rate = <225>;
+	ovp-threshold-percent = <16>;
+};
+
+&cdn_dp {
+	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
+};
+
+&edp {
+	status = "okay";
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+ap_i2c_mic: &i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	headsetcodec: rt5514@57 {
+		compatible = "realtek,rt5514";
+		reg = <0x57>;
+		realtek,dmic-init-delay-ms = <20>;
+	};
+};
+
+ap_i2c_tp: &i2c5 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+
+	/* These are relatively safe rise/fall times */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	/*
+	 * Note strange pullup enable.  Apparently this avoids leakage but
+	 * still allows us to get nice 4.7K pullups for high speed i2c
+	 * transfers.  Basically we want the pullup on whenever the ap is
+	 * alive, so the "en" pin just gets set to output high.
+	 */
+	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
+};
+
+&cros_ec {
+	cros_ec_pwm: ec-pwm {
+		compatible = "google,cros-ec-pwm";
+		#pwm-cells = <1>;
+	};
+
+	usbc_extcon1: extcon@1 {
+		compatible = "google,extcon-usbc-cros-ec";
+		google,usb-port-id = <1>;
+
+		#extcon-cells = <0>;
+	};
+};
+
+&sound {
+	rockchip,codec = <&max98357a &headsetcodec
+			  &codec &wacky_spi_audio &cdn_dp>;
+};
+
+&spi2 {
+	wacky_spi_audio: spi2@0 {
+		compatible = "realtek,rt5514";
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mic_int>;
+		/* May run faster once verified. */
+		spi-max-frequency = <10000000>;
+		wakeup-source;
+	};
+};
+
+&pci_rootport {
+	mvl_wifi: wifi@0,0 {
+		compatible = "pci1b4b,2b42";
+		reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
+		       0x83010000 0x0 0x00100000 0x0 0x00100000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake_l>;
+		wakeup-source;
+	};
+};
+
+&tcphy1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_1 {
+	status = "okay";
+	extcon = <&usbc_extcon1>;
+};
+
+&usbdrd_dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&pinctrl {
+	discrete-regulators {
+		pp1500_en: pp1500-en {
+			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp1800_audio_en: pp1800-audio-en {
+			rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+
+		pp3000_en: pp3000-en {
+			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		pp3300_disp_en: pp3300-disp-en {
+			rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
+					 &pcfg_pull_none>;
+		};
+
+		wlan_module_pd_l: wlan-module-pd-l {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
+					 &pcfg_pull_down>;
+		};
+	};
+};
+
+&wifi {
+	wifi_perst_l: wifi-perst-l {
+		rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+
+	wlan_host_wake_l: wlan-host-wake-l {
+		rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 8217912..2cc7c47 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -1,49 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Gru-Kevin Rev 6+ board device tree source
  *
  * Copyright 2016-2017 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
-#include "rk3399-gru.dtsi"
+#include "rk3399-gru-chromebook.dtsi"
 #include <dt-bindings/input/linux-event-codes.h>
 
 /*
@@ -75,24 +38,6 @@
 		vin-supply = <&pp3300>;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&cros_ec_pwm 1>;
-		brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
-				     17 18 19 20 21 22 23 24 25 26 27 28 29 30
-				     31 32 33 34 35 36 37 38 39 40 41 42 43 44
-				     45 46 47 48 49 50 51 52 53 54 55 56 57 58
-				     59 60 61 62 63 64 65 66 67 68 69 70 71 72
-				     73 74 75 76 77 78 79 80 81 82 83 84 85 86
-				     87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
-		default-brightness-level = <51>;
-		enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		power-supply = <&pp3300_disp>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en>;
-		pwm-delay-us = <10000>;
-	};
-
 	edp_panel: edp-panel {
 		compatible = "sharp,lq123p1jx31", "simple-panel";
 		backlight = <&backlight>;
@@ -124,6 +69,10 @@
 	};
 };
 
+&backlight {
+	pwms = <&cros_ec_pwm 1>;
+};
+
 &gpio_keys {
 	pinctrl-names = "default";
 	pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
@@ -280,23 +229,6 @@
 	};
 };
 
-&edp {
-	status = "okay";
-
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
-	};
-};
-
 &ppvar_bigcpu_pwm {
 	regulator-min-microvolt = <798674>;
 	regulator-max-microvolt = <1302172>;
@@ -374,10 +306,4 @@
 			rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
-
-	wifi {
-		wlan_host_wake_l: wlan-host-wake-l {
-			rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index f49bfab..ca07f60 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Google Gru (and derivatives) board device tree source
  *
  * Copyright 2016-2017 Google, Inc
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *  Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/input/input.h>
@@ -82,19 +45,6 @@
 		regulator-boot-on;
 	};
 
-	pp900_ap: pp900-ap {
-		compatible = "regulator-fixed";
-		regulator-name = "pp900_ap";
-
-		/* EC turns on w/ pp900_ap_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
 	pp1200_lpddr: pp1200-lpddr {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1200_lpddr";
@@ -121,23 +71,6 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
-	pp3000: pp3000 {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp3000_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
 	pp3300: pp3300 {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300";
@@ -191,8 +124,6 @@
 		ctrl-voltage-range = <800107 1302232>;
 
 		regulator-settling-time-up-us = <322>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
 	};
 
 	ppvar_litcpu_pwm: ppvar-litcpu-pwm {
@@ -222,8 +153,6 @@
 		ctrl-voltage-range = <797743 1307837>;
 
 		regulator-settling-time-up-us = <384>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
 	};
 
 	ppvar_gpu_pwm: ppvar-gpu-pwm {
@@ -253,63 +182,12 @@
 		ctrl-voltage-range = <786384 1217747>;
 
 		regulator-settling-time-up-us = <390>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
-	};
-
-	ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
-		compatible = "pwm-regulator";
-		regulator-name = "ppvar_centerlogic_pwm";
-
-		pwms = <&pwm3 0 3337 0>;
-		pwm-supply = <&ppvar_sys>;
-		pwm-dutycycle-range = <100 0>;
-		pwm-dutycycle-unit = <100>;
-
-		/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <799434>;
-		regulator-max-microvolt = <1049925>;
-	};
-
-	ppvar_centerlogic: ppvar-centerlogic {
-		compatible = "vctrl-regulator";
-		regulator-name = "ppvar_centerlogic";
-
-		regulator-min-microvolt = <799434>;
-		regulator-max-microvolt = <1049925>;
-
-		ctrl-supply = <&ppvar_centerlogic_pwm>;
-		ctrl-voltage-range = <799434 1049925>;
-
-		regulator-settling-time-up-us = <378>;
-		min-slew-down-rate = <225>;
-		ovp-threshold-percent = <16>;
-	};
-
-	/* Schematics call this PPVAR even though it's fixed */
-	ppvar_logic: ppvar-logic {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_logic";
-
-		/* EC turns on w/ ppvar_logic_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <900000>;
-
-		vin-supply = <&ppvar_sys>;
 	};
 
 	/* EC turns on w/ pp900_ddrpll_en */
 	pp900_ddrpll: pp900-ap {
 	};
 
-	/* EC turns on w/ pp900_pcie_en */
-	pp900_pcie: pp900-ap {
-	};
-
 	/* EC turns on w/ pp900_pll_en */
 	pp900_pll: pp900-ap {
 	};
@@ -318,10 +196,6 @@
 	pp900_pmu: pp900-ap {
 	};
 
-	/* EC turns on w/ pp900_usb_en */
-	pp900_usb: pp900-ap {
-	};
-
 	/* EC turns on w/ pp1800_s0_en_l */
 	pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
 	};
@@ -346,79 +220,6 @@
 	pp1800_usb: pp1800 {
 	};
 
-	pp1500_ap_io: pp1500-ap-io {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1500_ap_io";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp1500_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-
-		vin-supply = <&pp1800>;
-	};
-
-	pp1800_audio: pp1800-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp1800_audio_en>;
-
-		enable-active-high;
-		gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&pp1800>;
-	};
-
-	/* gpio is shared with pp3300_wifi_bt */
-	pp1800_pcie: pp1800-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_pcie";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_module_pd_l>;
-
-		enable-active-high;
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
-		/*
-		 * Need to wait 1ms + ramp-up time before we can power on WiFi.
-		 * This has been approximated as 8ms total.
-		 */
-		regulator-enable-ramp-delay = <8000>;
-
-		vin-supply = <&pp1800>;
-	};
-
-	/*
-	 * This is a bit of a hack. The WiFi module should be reset at least
-	 * 1ms after its regulators have ramped up (max rampup time is ~7ms).
-	 * With some stretching of the imagination, we can call the 1.8V
-	 * regulator a supply.
-	 */
-	wlan_pd_n: wlan-pd-n {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan_pd_n";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_module_reset_l>;
-
-		enable-active-high;
-		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp1800_pcie>;
-	};
-
-	/* Always on; plain and simple */
-	pp3000_ap: pp3000_emmc: pp3000 {
-	};
-
 	pp3000_sd_slot: pp3000-sd-slot {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3000_sd_slot";
@@ -457,34 +258,6 @@
 	pp3300_trackpad: pp3300-trackpad {
 	};
 
-	/* EC turns on w/ pp3300_usb_en_l */
-	pp3300_usb: pp3300 {
-	};
-
-	pp3300_disp: pp3300-disp {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_disp";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pp3300_disp_en>;
-
-		enable-active-high;
-		gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-
-		startup-delay-us = <2000>;
-		vin-supply = <&pp3300>;
-	};
-
-	/* gpio is shared with pp1800_pcie and pinctrl is set there */
-	pp3300_wifi_bt: pp3300-wifi-bt {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_wifi_bt";
-
-		enable-active-high;
-		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
-		vin-supply = <&pp3300>;
-	};
-
 	/* EC turns on w/ usb_a_en */
 	pp5000_usb_a_vbus: pp5000 {
 	};
@@ -494,7 +267,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l>;
 
-		wake-on-bt {
+		wake_on_bt: wake-on-bt {
 			label = "Wake-on-Bluetooth";
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
@@ -512,17 +285,14 @@
 		status = "okay";
 	};
 
-	sound {
+	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
 		rockchip,cpu = <&i2s0 &i2s2>;
-		rockchip,codec = <&max98357a &headsetcodec
-				  &codec &wacky_spi_audio &cdn_dp>;
 	};
 };
 
 &cdn_dp {
 	status = "okay";
-	extcon = <&usbc_extcon0>, <&usbc_extcon1>;
 };
 
 /*
@@ -613,22 +383,6 @@
 	status = "okay";
 };
 
-ap_i2c_mic: &i2c1 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	headsetcodec: rt5514@57 {
-		compatible = "realtek,rt5514";
-		reg = <0x57>;
-		realtek,dmic-init-delay-ms = <20>;
-	};
-};
-
 ap_i2c_ts: &i2c3 {
 	status = "okay";
 
@@ -639,24 +393,6 @@
 	i2c-scl-rising-time-ns = <300>;
 };
 
-ap_i2c_tp: &i2c5 {
-	status = "okay";
-
-	clock-frequency = <400000>;
-
-	/* These are relatively safe rise/fall times */
-	i2c-scl-falling-time-ns = <50>;
-	i2c-scl-rising-time-ns = <300>;
-
-	/*
-	 * Note strange pullup enable.  Apparently this avoids leakage but
-	 * still allows us to get nice 4.7K pullups for high speed i2c
-	 * transfers.  Basically we want the pullup on whenever the ap is
-	 * alive, so the "en" pin just gets set to output high.
-	 */
-	pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
-};
-
 ap_i2c_audio: &i2c8 {
 	status = "okay";
 
@@ -730,17 +466,6 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
-
-		mvl_wifi: wifi@0,0 {
-			compatible = "pci1b4b,2b42";
-			reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
-			       0x83010000 0x0 0x00100000 0x0 0x00100000>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&wlan_host_wake_l>;
-			wakeup-source;
-		};
 	};
 };
 
@@ -830,18 +555,6 @@
 
 &spi2 {
 	status = "okay";
-
-	wacky_spi_audio: spi2@0 {
-		compatible = "realtek,rt5514";
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&mic_int>;
-		/* May run faster once verified. */
-		spi-max-frequency = <10000000>;
-		wakeup-source;
-	};
 };
 
 &spi5 {
@@ -863,24 +576,12 @@
 			#size-cells = <0>;
 		};
 
-		cros_ec_pwm: ec-pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-
 		usbc_extcon0: extcon@0 {
 			compatible = "google,extcon-usbc-cros-ec";
 			google,usb-port-id = <0>;
 
 			#extcon-cells = <0>;
 		};
-
-		usbc_extcon1: extcon@1 {
-			compatible = "google,extcon-usbc-cros-ec";
-			google,usb-port-id = <1>;
-
-			#extcon-cells = <0>;
-		};
 	};
 };
 
@@ -896,19 +597,10 @@
 	extcon = <&usbc_extcon0>;
 };
 
-&tcphy1 {
-	status = "okay";
-	extcon = <&usbc_extcon1>;
-};
-
 &u2phy0 {
 	status = "okay";
 };
 
-&u2phy1 {
-	status = "okay";
-};
-
 &u2phy0_host {
 	status = "okay";
 };
@@ -929,22 +621,10 @@
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
 &usb_host0_ohci {
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
 &usbdrd3_0 {
 	status = "okay";
 	extcon = <&usbc_extcon0>;
@@ -955,16 +635,6 @@
 	dr_mode = "host";
 };
 
-&usbdrd3_1 {
-	status = "okay";
-	extcon = <&usbc_extcon1>;
-};
-
-&usbdrd_dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
 &vopb {
 	status = "okay";
 };
@@ -1023,26 +693,6 @@
 	};
 
 	discrete-regulators {
-		pp1500_en: pp1500-en {
-			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		pp1800_audio_en: pp1800-audio-en {
-			rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
-					 &pcfg_pull_down>;
-		};
-
-		pp3300_disp_en: pp3300-disp-en {
-			rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
-		pp3000_en: pp3000-en {
-			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
-					 &pcfg_pull_none>;
-		};
-
 		sd_io_pwr_en: sd-io-pwr-en {
 			rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
@@ -1057,11 +707,6 @@
 			rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
-
-		wlan_module_pd_l: wlan-module-pd-l {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
-					 &pcfg_pull_down>;
-		};
 	};
 
 	codec {
@@ -1168,11 +813,7 @@
 		};
 	};
 
-	wifi {
-		wifi_perst_l: wifi-perst-l {
-			rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-
+	wifi: wifi {
 		wlan_module_reset_l: wlan-module-reset-l {
 			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index d8a120f..69cc9b0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
index 81617bc..d6f1095 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 / {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index e0afdd8..e0d64f8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 14a0f199..0130b9f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/pwm/pwm.h>
@@ -439,7 +402,6 @@
 	pinctrl-0 = <&i2s0_2ch_bus>;
 	rockchip,playback-channels = <2>;
 	rockchip,capture-channels = <2>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index ad7548d..fef2c06 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -186,7 +149,6 @@
 &i2s0 {
 	rockchip,playback-channels = <8>;
 	rockchip,capture-channels = <8>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
@@ -235,6 +197,5 @@
 &spdif {
 	i2c-scl-rising-time-ns = <450>;
 	i2c-scl-falling-time-ns = <15>;
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 941b627..36b6079 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "dt-bindings/pwm/pwm.h"
@@ -227,6 +190,10 @@
 	status = "okay";
 };
 
+&hdmi_sound {
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 	i2c-scl-rising-time-ns = <168>;
@@ -458,7 +425,6 @@
 };
 
 &i2s2 {
-	#sound-dai-cells = <0>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index e0040b6..c88e603 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/rk3399-cru.h>
@@ -108,8 +71,8 @@
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
-			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -119,6 +82,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -128,6 +92,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -137,6 +102,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKL>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <100>;
 		};
 
@@ -145,8 +111,8 @@
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
-			#cooling-cells = <2>; /* min followed by max */
 			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
 		};
 
@@ -156,6 +122,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			clocks = <&cru ARMCLKB>;
+			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <436>;
 		};
 	};
@@ -1446,10 +1413,6 @@
 			 <&cru SRST_P_UPHY0_TCPHY>;
 		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
 		rockchip,grf = <&grf>;
-		rockchip,typec-conn-dir = <0xe580 0 16>;
-		rockchip,usb3tousb2-en = <0xe580 3 19>;
-		rockchip,external-psm = <0xe588 14 30>;
-		rockchip,pipe-status = <0xe5c0 0 0>;
 		status = "disabled";
 
 		tcphy0_dp: dp-port {
@@ -1475,10 +1438,6 @@
 			 <&cru SRST_P_UPHY1_TCPHY>;
 		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
 		rockchip,grf = <&grf>;
-		rockchip,typec-conn-dir = <0xe58c 0 16>;
-		rockchip,usb3tousb2-en = <0xe58c 3 19>;
-		rockchip,external-psm = <0xe594 14 30>;
-		rockchip,pipe-status = <0xe5c0 16 16>;
 		status = "disabled";
 
 		tcphy1_dp: dp-port {
@@ -1516,6 +1475,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_bus>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1531,6 +1491,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_8ch_bus>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1545,6 +1506,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_2ch_bus>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1557,6 +1519,7 @@
 		clock-names = "i2s_clk", "i2s_hclk";
 		clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
 		power-domains = <&power RK3399_PD_SDIOAUDIO>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -1698,6 +1661,21 @@
 		status = "disabled";
 	};
 
+	hdmi_sound: hdmi-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "hdmi-sound";
+		status = "disabled";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s2>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+
 	hdmi: hdmi@ff940000 {
 		compatible = "rockchip,rk3399-dw-hdmi";
 		reg = <0x0 0xff940000 0x0 0x20000>;
@@ -1711,6 +1689,7 @@
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -1936,14 +1915,19 @@
 			drive-strength = <12>;
 		};
 
-		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
-			bias-pull-up;
-			drive-strength = <8>;
+		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
+			bias-disable;
+			drive-strength = <13>;
 		};
 
-		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
-			bias-pull-down;
-			drive-strength = <4>;
+		pcfg_pull_none_18ma: pcfg-pull-none-18ma {
+			bias-disable;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_none_20ma: pcfg-pull-none-20ma {
+			bias-disable;
+			drive-strength = <20>;
 		};
 
 		pcfg_pull_up_2ma: pcfg-pull-up-2ma {
@@ -1951,14 +1935,52 @@
 			drive-strength = <2>;
 		};
 
+		pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+			bias-pull-up;
+			drive-strength = <8>;
+		};
+
+		pcfg_pull_up_18ma: pcfg-pull-up-18ma {
+			bias-pull-up;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_up_20ma: pcfg-pull-up-20ma {
+			bias-pull-up;
+			drive-strength = <20>;
+		};
+
+		pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+			bias-pull-down;
+			drive-strength = <4>;
+		};
+
+		pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+			bias-pull-down;
+			drive-strength = <8>;
+		};
+
 		pcfg_pull_down_12ma: pcfg-pull-down-12ma {
 			bias-pull-down;
 			drive-strength = <12>;
 		};
 
-		pcfg_pull_none_13ma: pcfg-pull-none-13ma {
-			bias-disable;
-			drive-strength = <13>;
+		pcfg_pull_down_18ma: pcfg-pull-down-18ma {
+			bias-pull-down;
+			drive-strength = <18>;
+		};
+
+		pcfg_pull_down_20ma: pcfg-pull-down-20ma {
+			bias-pull-down;
+			drive-strength = <20>;
+		};
+
+		pcfg_output_high: pcfg-output-high {
+			output-high;
+		};
+
+		pcfg_output_low: pcfg-output-low {
+			output-low;
 		};
 
 		clock {
@@ -2481,45 +2503,60 @@
 		pwm0 {
 			pwm0_pin: pwm0-pin {
 				rockchip,pins =
-					<4 18 RK_FUNC_1 &pcfg_pull_none>;
+					<4 RK_PC2 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			pwm0_pin_pull_down: pwm0-pin-pull-down {
+				rockchip,pins =
+					<4 RK_PC2 RK_FUNC_1 &pcfg_pull_down>;
 			};
 
 			vop0_pwm_pin: vop0-pwm-pin {
 				rockchip,pins =
-					<4 18 RK_FUNC_2 &pcfg_pull_none>;
+					<4 RK_PC2 RK_FUNC_2 &pcfg_pull_none>;
+			};
+
+			vop1_pwm_pin: vop1-pwm-pin {
+				rockchip,pins =
+					<4 RK_PC2 RK_FUNC_3 &pcfg_pull_none>;
 			};
 		};
 
 		pwm1 {
 			pwm1_pin: pwm1-pin {
 				rockchip,pins =
-					<4 22 RK_FUNC_1 &pcfg_pull_none>;
+					<4 RK_PC6 RK_FUNC_1 &pcfg_pull_none>;
 			};
 
-			vop1_pwm_pin: vop1-pwm-pin {
+			pwm1_pin_pull_down: pwm1-pin-pull-down {
 				rockchip,pins =
-					<4 18 RK_FUNC_3 &pcfg_pull_none>;
+					<4 RK_PC6 RK_FUNC_1 &pcfg_pull_down>;
 			};
 		};
 
 		pwm2 {
 			pwm2_pin: pwm2-pin {
 				rockchip,pins =
-					<1 19 RK_FUNC_1 &pcfg_pull_none>;
+					<1 RK_PC3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			pwm2_pin_pull_down: pwm2-pin-pull-down {
+				rockchip,pins =
+					<1 RK_PC3 RK_FUNC_1 &pcfg_pull_down>;
 			};
 		};
 
 		pwm3a {
 			pwm3a_pin: pwm3a-pin {
 				rockchip,pins =
-					<0 6 RK_FUNC_1 &pcfg_pull_none>;
+					<0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
 
 		pwm3b {
 			pwm3b_pin: pwm3b-pin {
 				rockchip,pins =
-					<1 14 RK_FUNC_1 &pcfg_pull_none>;
+					<1 RK_PB6 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index ae3b5ad..7968d52 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -60,6 +60,7 @@
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 7919233..1a5e7c2 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -60,6 +60,7 @@
 			&i2s_port4
 			&spdif_port0
 			&comp_spdif_port0>;
+		hp-det-gpio = <&gpio UNIPHIER_GPIO_IRQ(0) GPIO_ACTIVE_LOW>;
 	};
 
 	spdif-out {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 0298bd0..caf1126 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -58,6 +58,7 @@
 			clocks = <&sys_clk 32>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@100 {
@@ -77,6 +78,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster1_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi
index 98d3b4f..82bd642 100644
--- a/arch/arm64/boot/dts/sprd/sc2731.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi
@@ -17,6 +17,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		led-controller@200 {
+			compatible = "sprd,sc27xx-bltc", "sprd,sc2731-bltc";
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				label = "red";
+				reg = <0x0>;
+			};
+
+			led@1 {
+				label = "green";
+				reg = <0x1>;
+			};
+
+			led@2 {
+				label = "blue";
+				reg = <0x2>;
+			};
+		};
+
 		rtc@280 {
 			compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc";
 			reg = <0x280>;
@@ -35,6 +57,28 @@
 			#interrupt-cells = <2>;
 		};
 
+		efuse@380 {
+			compatible = "sprd,sc27xx-efuse", "sprd,sc2731-efuse";
+			reg = <0x380>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			hwlocks = <&hwlock 12>;
+		};
+
+		pmic_adc: adc@480 {
+			compatible = "sprd,sc27xx-adc", "sprd,sc2731-adc";
+			reg = <0x480>;
+			interrupt-parent = <&sc2731_pmic>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			#io-channel-cells = <1>;
+			hwlocks = <&hwlock 4>;
+		};
+
+		vibrator@ec8 {
+			compatible = "sprd,sc27xx-vibrator", "sprd,sc2731-vibrator";
+			reg = <0xec8>;
+		};
+
 		regulators {
 			compatible = "sprd,sc27xx-regulator";
 
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index e9db910..eb6be56 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -146,6 +146,12 @@
 				clocks = <&ext_32k>;
 			};
 
+			timer@40050020 {
+				compatible = "sprd,sc9860-suspend-timer";
+				reg = <0 0x40050020 0 0x20>;
+				clocks = <&ext_32k>;
+			};
+
 			hwlock: hwspinlock@40500000 {
 				compatible = "sprd,hwspinlock-r3p0";
 				reg = <0 0x40500000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
new file mode 100644
index 0000000..63e619d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Make file to build device tree binaries for boards based on
+# Texas Instruments Inc processors
+#
+# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+#
+
+dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
new file mode 100644
index 0000000..2409344
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_main {
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x01800000 0x10000>,	/* GICD */
+		      <0x01880000 0x90000>;	/* GICR */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: gic-its@18200000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x01820000 0x10000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
new file mode 100644
index 0000000..cede1fa
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Texas Instruments K3 AM654 SoC";
+	compatible = "ti,am654";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: interconnect@100000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
+			 <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
+			 <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
+			 <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
+			 <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+			 /* MCUSS Range */
+			 <0x28380000 0x00 0x28380000 0x03880000>,
+			 <0x40200000 0x00 0x40200000 0x00900100>,
+			 <0x42040000 0x00 0x42040000 0x03ac2400>,
+			 <0x45100000 0x00 0x45100000 0x00c24000>,
+			 <0x46000000 0x00 0x46000000 0x00200000>,
+			 <0x47000000 0x00 0x47000000 0x00068400>;
+
+		cbass_mcu: interconnect@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
+				 <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
+				 <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
+				 <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x46000000 0x46000000 0x00200000>, /* CPSW */
+				 <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+
+			cbass_wakeup: interconnect@42040000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/* WKUP  Basic peripherals */
+				ranges = <0x42040000 0x42040000 0x03ac2400>;
+			};
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am65-main.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
new file mode 100644
index 0000000..af6956f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+
+/ {
+	compatible =  "ti,am654-evm", "ti,am654";
+	model = "Texas Instruments AM654 Base Board";
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		secure_ddr: secure_ddr@9e800000 {
+			reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi
new file mode 100644
index 0000000..2affa6f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC family in Quad core configuration
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include "k3-am65.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1: cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+
+				core1 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@100 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x100>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+
+		cpu3: cpu@101 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			reg = <0x101>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_1>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	L2_1: l2-cache1 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x80000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index c2a0c00..60f5443 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
+dtb-$(CONFIG_ARCH_ZYNQMP) += avnet-ultra96-rev1.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
new file mode 100644
index 0000000..88aa06f
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/avnet-ultra96-rev1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Avnet Ultra96 rev1
+ *
+ * (C) Copyright 2018, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ */
+
+/dts-v1/;
+
+#include "zynqmp-zcu100-revC.dts"
+
+/ {
+	model = "Avnet Ultra96 Rev1";
+	compatible = "avnet,ultra96-rev1", "avnet,ultra96",
+		     "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100",
+		     "xlnx,zynqmp";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
deleted file mode 100644
index 9f5eedb..0000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * clock specification for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
-	misc_clk: misc_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-	};
-
-	i2c_clk: i2c_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <111111111>;
-	};
-
-	sata_clk: sata_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <75000000>;
-	};
-
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-};
-
-&can0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&can1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
-	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
-};
-
-&gpio {
-	clocks = <&misc_clk>;
-};
-
-&i2c0 {
-	clocks = <&i2c_clk>;
-};
-
-&i2c1 {
-	clocks = <&i2c_clk>;
-};
-
-&sata {
-	clocks = <&sata_clk>;
-};
-
-&sdhci0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&sdhci1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&spi0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&spi1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&uart0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&usb0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&usb1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&watchdog0 {
-	clocks= <&misc_clk>;
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
deleted file mode 100644
index 4b06849..0000000
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ /dev/null
@@ -1,154 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
-	model = "ZynqMP EP108";
-
-	aliases {
-		mmc0 = &sdhci0;
-		mmc1 = &sdhci1;
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	phy0: phy@0 {
-		reg = <0>;
-		max-speed = <100>;
-	};
-};
-
-&gpio {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&sata {
-	status = "okay";
-	ceva,broken-gen2;
-	/* SATA Phy OOB timing settings */
-	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-};
-
-&sdhci1 {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <1>;
-	spi0_flash0: spi0_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi0_flash0@0 {
-			label = "spi0_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <1>;
-	spi1_flash0: spi1_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi1_flash0@0 {
-			label = "spi1_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	maximum-speed = "high-speed";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-	maximum-speed = "high-speed";
-};
-
-&watchdog0 {
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 3e862a9..eb5e8bd 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -44,8 +44,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw4 {
 			label = "sw4";
@@ -89,12 +87,6 @@
 			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
-
-		bt_power {
-			label = "bt_power";
-			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
 	};
 
 	wmmcsdio_fixed: fixedregulator-mmcsdio {
@@ -267,6 +259,10 @@
 
 &uart0 {
 	status = "okay";
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &uart1 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 5b4ffe6..25dd574 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -41,8 +41,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 668f7f2..259f21b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -41,8 +41,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 9a9dd6a..a61b3cc 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -41,8 +41,6 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 		sw19 {
 			label = "sw19";
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index 92770d8..be4570b 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -1,3 +1,17 @@
+# 64-bit ARM SoCs from TI
+if ARM64
+
+if ARCH_K3
+
+config ARCH_K3_AM6_SOC
+	bool "K3 AM6 SoC"
+	help
+	  Enable support for TI's AM6 SoC Family support
+
+endif
+
+endif
+
 #
 # TI SOC drivers
 #
diff --git a/include/dt-bindings/memory/mt2712-larb-port.h b/include/dt-bindings/memory/mt2712-larb-port.h
new file mode 100644
index 0000000..6f9aa73
--- /dev/null
+++ b/include/dt-bindings/memory/mt2712-larb-port.h
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Yong Wu <yong.wu@mediatek.com>
+ */
+#ifndef __DTS_IOMMU_PORT_MT2712_H
+#define __DTS_IOMMU_PORT_MT2712_H
+
+#define MTK_M4U_ID(larb, port)		(((larb) << 5) | (port))
+
+#define M4U_LARB0_ID			0
+#define M4U_LARB1_ID			1
+#define M4U_LARB2_ID			2
+#define M4U_LARB3_ID			3
+#define M4U_LARB4_ID			4
+#define M4U_LARB5_ID			5
+#define M4U_LARB6_ID			6
+#define M4U_LARB7_ID			7
+#define M4U_LARB8_ID			8
+#define M4U_LARB9_ID			9
+
+/* larb0 */
+#define M4U_PORT_DISP_OVL0		MTK_M4U_ID(M4U_LARB0_ID, 0)
+#define M4U_PORT_DISP_RDMA0		MTK_M4U_ID(M4U_LARB0_ID, 1)
+#define M4U_PORT_DISP_WDMA0		MTK_M4U_ID(M4U_LARB0_ID, 2)
+#define M4U_PORT_DISP_OD_R		MTK_M4U_ID(M4U_LARB0_ID, 3)
+#define M4U_PORT_DISP_OD_W		MTK_M4U_ID(M4U_LARB0_ID, 4)
+#define M4U_PORT_MDP_RDMA0		MTK_M4U_ID(M4U_LARB0_ID, 5)
+#define M4U_PORT_MDP_WDMA		MTK_M4U_ID(M4U_LARB0_ID, 6)
+#define M4U_PORT_DISP_RDMA2		MTK_M4U_ID(M4U_LARB0_ID, 7)
+
+/* larb1 */
+#define M4U_PORT_HW_VDEC_MC_EXT		MTK_M4U_ID(M4U_LARB1_ID, 0)
+#define M4U_PORT_HW_VDEC_PP_EXT		MTK_M4U_ID(M4U_LARB1_ID, 1)
+#define M4U_PORT_HW_VDEC_UFO_EXT	MTK_M4U_ID(M4U_LARB1_ID, 2)
+#define M4U_PORT_HW_VDEC_VLD_EXT	MTK_M4U_ID(M4U_LARB1_ID, 3)
+#define M4U_PORT_HW_VDEC_VLD2_EXT	MTK_M4U_ID(M4U_LARB1_ID, 4)
+#define M4U_PORT_HW_VDEC_AVC_MV_EXT	MTK_M4U_ID(M4U_LARB1_ID, 5)
+#define M4U_PORT_HW_VDEC_PRED_RD_EXT	MTK_M4U_ID(M4U_LARB1_ID, 6)
+#define M4U_PORT_HW_VDEC_PRED_WR_EXT	MTK_M4U_ID(M4U_LARB1_ID, 7)
+#define M4U_PORT_HW_VDEC_PPWRAP_EXT	MTK_M4U_ID(M4U_LARB1_ID, 8)
+#define M4U_PORT_HW_VDEC_TILE		MTK_M4U_ID(M4U_LARB1_ID, 9)
+#define M4U_PORT_HW_IMG_RESZ_EXT	MTK_M4U_ID(M4U_LARB1_ID, 10)
+
+/* larb2 */
+#define M4U_PORT_CAM_DMA0		MTK_M4U_ID(M4U_LARB2_ID, 0)
+#define M4U_PORT_CAM_DMA1		MTK_M4U_ID(M4U_LARB2_ID, 1)
+#define M4U_PORT_CAM_DMA2		MTK_M4U_ID(M4U_LARB2_ID, 2)
+
+/* larb3 */
+#define M4U_PORT_VENC_RCPU		MTK_M4U_ID(M4U_LARB3_ID, 0)
+#define M4U_PORT_VENC_REC		MTK_M4U_ID(M4U_LARB3_ID, 1)
+#define M4U_PORT_VENC_BSDMA		MTK_M4U_ID(M4U_LARB3_ID, 2)
+#define M4U_PORT_VENC_SV_COMV		MTK_M4U_ID(M4U_LARB3_ID, 3)
+#define M4U_PORT_VENC_RD_COMV		MTK_M4U_ID(M4U_LARB3_ID, 4)
+#define M4U_PORT_VENC_CUR_CHROMA	MTK_M4U_ID(M4U_LARB3_ID, 5)
+#define M4U_PORT_VENC_REF_CHROMA	MTK_M4U_ID(M4U_LARB3_ID, 6)
+#define M4U_PORT_VENC_CUR_LUMA		MTK_M4U_ID(M4U_LARB3_ID, 7)
+#define M4U_PORT_VENC_REF_LUMA		MTK_M4U_ID(M4U_LARB3_ID, 8)
+
+/* larb4 */
+#define M4U_PORT_DISP_OVL1		MTK_M4U_ID(M4U_LARB4_ID, 0)
+#define M4U_PORT_DISP_RDMA1		MTK_M4U_ID(M4U_LARB4_ID, 1)
+#define M4U_PORT_DISP_WDMA1		MTK_M4U_ID(M4U_LARB4_ID, 2)
+#define M4U_PORT_DISP_OD1_R		MTK_M4U_ID(M4U_LARB4_ID, 3)
+#define M4U_PORT_DISP_OD1_W		MTK_M4U_ID(M4U_LARB4_ID, 4)
+#define M4U_PORT_MDP_RDMA1		MTK_M4U_ID(M4U_LARB4_ID, 5)
+#define M4U_PORT_MDP_WROT1		MTK_M4U_ID(M4U_LARB4_ID, 6)
+
+/* larb5 */
+#define M4U_PORT_DISP_OVL2		MTK_M4U_ID(M4U_LARB5_ID, 0)
+#define M4U_PORT_DISP_WDMA2		MTK_M4U_ID(M4U_LARB5_ID, 1)
+#define M4U_PORT_MDP_RDMA2		MTK_M4U_ID(M4U_LARB5_ID, 2)
+#define M4U_PORT_MDP_WROT0		MTK_M4U_ID(M4U_LARB5_ID, 3)
+
+/* larb6 */
+#define M4U_PORT_JPGDEC_WDMA_0		MTK_M4U_ID(M4U_LARB6_ID, 0)
+#define M4U_PORT_JPGDEC_WDMA_1		MTK_M4U_ID(M4U_LARB6_ID, 1)
+#define M4U_PORT_JPGDEC_BSDMA_0		MTK_M4U_ID(M4U_LARB6_ID, 2)
+#define M4U_PORT_JPGDEC_BSDMA_1		MTK_M4U_ID(M4U_LARB6_ID, 3)
+
+/* larb7 */
+#define M4U_PORT_MDP_RDMA3		MTK_M4U_ID(M4U_LARB7_ID, 0)
+#define M4U_PORT_MDP_WROT2		MTK_M4U_ID(M4U_LARB7_ID, 1)
+
+/* larb8 */
+#define M4U_PORT_VDO			MTK_M4U_ID(M4U_LARB8_ID, 0)
+#define M4U_PORT_NR			MTK_M4U_ID(M4U_LARB8_ID, 1)
+#define M4U_PORT_WR_CHANNEL0		MTK_M4U_ID(M4U_LARB8_ID, 2)
+
+/* larb9 */
+#define M4U_PORT_TVD			MTK_M4U_ID(M4U_LARB9_ID, 0)
+#define M4U_PORT_WR_CHANNEL1		MTK_M4U_ID(M4U_LARB9_ID, 1)
+
+#endif