rtc: bunch of drivers: fix 'no irq' case handing
This patch fixes a bunch of irq checking misuses. Most drivers were
getting irq via platform_get_irq(), which returns -ENXIO or r->start.
rtc-cmos.c is special. It is using PNP and platform bindings. Hopefully
nobody is using PNP IRQ 0 for RTC. So the changes should be safe.
rtc-sh.c is using platform_get_irq, but was storing a result into an
unsigned type, then was checking for < 0. This is fixed now.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index 25caada..23a07fe 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -326,9 +326,9 @@
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
- if (pdata->irq < 0) {
+ if (pdata->irq <= 0)
return -EINVAL;
- }
+
pdata->alrm_mday = alrm->time.tm_mday;
pdata->alrm_hour = alrm->time.tm_hour;
pdata->alrm_min = alrm->time.tm_min;
@@ -346,9 +346,9 @@
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
- if (pdata->irq < 0) {
+ if (pdata->irq <= 0)
return -EINVAL;
- }
+
alrm->time.tm_mday = pdata->alrm_mday < 0 ? 0 : pdata->alrm_mday;
alrm->time.tm_hour = pdata->alrm_hour < 0 ? 0 : pdata->alrm_hour;
alrm->time.tm_min = pdata->alrm_min < 0 ? 0 : pdata->alrm_min;
@@ -385,7 +385,7 @@
struct platform_device *pdev = to_platform_device(dev);
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
- if (pdata->irq < 0) {
+ if (pdata->irq <= 0) {
return -ENOIOCTLCMD; /* fall back into rtc-dev's emulation */
}
switch (cmd) {
@@ -503,7 +503,6 @@
if (!pdata) {
return -ENOMEM;
}
- pdata->irq = -1;
pdata->size = res->end - res->start + 1;
if (!request_mem_region(res->start, pdata->size, pdev->name)) {
ret = -EBUSY;
@@ -545,13 +544,13 @@
* if the platform has an interrupt in mind for this device,
* then by all means, set it
*/
- if (pdata->irq >= 0) {
+ if (pdata->irq > 0) {
rtc_read(RTC_CMD1);
if (request_irq(pdata->irq, ds1511_interrupt,
IRQF_DISABLED | IRQF_SHARED, pdev->name, pdev) < 0) {
dev_warn(&pdev->dev, "interrupt not available.\n");
- pdata->irq = -1;
+ pdata->irq = 0;
}
}
@@ -572,7 +571,7 @@
if (pdata->rtc) {
rtc_device_unregister(pdata->rtc);
}
- if (pdata->irq >= 0) {
+ if (pdata->irq > 0) {
free_irq(pdata->irq, pdev);
}
if (ds1511_base) {
@@ -595,7 +594,7 @@
sysfs_remove_bin_file(&pdev->dev.kobj, &ds1511_nvram_attr);
rtc_device_unregister(pdata->rtc);
pdata->rtc = NULL;
- if (pdata->irq >= 0) {
+ if (pdata->irq > 0) {
/*
* disable the alarm interrupt
*/