mtd: sh_flctl: Use user oob data in hardware ECC mode
In hardware ecc mode, the flctl now writes and reads the oob data
provided by the user. Additionally the ECC is now returned in normal
page reads, not only when using the explicit NAND_CMD_READOOB command.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index bc50e83..2eb1541 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -275,13 +275,12 @@
{
int i, len_4align;
unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
- void *fifo_addr = (void *)FLDTFIFO(flctl);
len_4align = (rlen + 3) / 4;
for (i = 0; i < len_4align; i++) {
wait_rfifo_ready(flctl);
- buf[i] = readl(fifo_addr);
+ buf[i] = readl(FLDTFIFO(flctl));
buf[i] = be32_to_cpu(buf[i]);
}
}
@@ -318,6 +317,18 @@
}
}
+static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+ int i, len_4align;
+ unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
+
+ len_4align = (rlen + 3) / 4;
+ for (i = 0; i < len_4align; i++) {
+ wait_wecfifo_ready(flctl);
+ writel(cpu_to_be32(data[i]), FLECFIFO(flctl));
+ }
+}
+
static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -384,6 +395,7 @@
uint8_t *buf, int oob_required, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
@@ -391,6 +403,7 @@
const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
@@ -466,7 +479,7 @@
static void execmd_write_page_sector(struct mtd_info *mtd)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int i, page_addr = flctl->seqin_page_addr;
+ int page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
page_sectors = flctl->page_size ? 4 : 1;
@@ -482,11 +495,7 @@
for (sector = 0; sector < page_sectors; sector++) {
write_fiforeg(flctl, 512, 512 * sector);
-
- for (i = 0; i < 4; i++) {
- wait_wecfifo_ready(flctl); /* wait for write ready */
- writel(0xFFFFFFFF, FLECFIFO(flctl));
- }
+ write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
}
wait_completion(flctl);