sh: Add SH7785 Highlander board support (R7785RP).
This adds preliminary support for the SH7785-based Highlander board.
Some of the Highlander support code is reordered so that most of it
can be reused directly.
This also plugs in missing SH7785 checks in the places that need it,
as this is the first board to support the CPU.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 2faba66..6af0cc3 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -1,10 +1,13 @@
/*
* arch/sh/boards/renesas/r7780rp/setup.c
*
+ * Renesas Solutions Highlander Support.
+ *
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2005 - 2007 Paul Mundt
*
- * Renesas Solutions Highlander R7780RP-1 Support.
+ * This contains support for the R7780RP-1, R7780MP, and R7785RP
+ * Highlander modules.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -18,32 +21,6 @@
#include <asm/clock.h>
#include <asm/io.h>
-extern void init_r7780rp_IRQ(void);
-
-static struct resource m66596_usb_host_resources[] = {
- [0] = {
- .start = 0xa4800000,
- .end = 0xa4ffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 6, /* irq number */
- .end = 6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m66596_usb_host_device = {
- .name = "m66596-hcd",
- .id = 0,
- .dev = {
- .dma_mask = NULL, /* don't use dma */
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(m66596_usb_host_resources),
- .resource = m66596_usb_host_resources,
-};
-
static struct resource cf_ide_resources[] = {
[0] = {
.start = PA_AREA5_IO + 0x1000,
@@ -56,10 +33,10 @@
.flags = IORESOURCE_MEM,
},
[2] = {
-#ifdef CONFIG_SH_R7780MP
- .start = 1,
-#else
+#ifdef CONFIG_SH_R7780RP
.start = 4,
+#else
+ .start = 1,
#endif
.flags = IORESOURCE_IRQ,
},
@@ -92,15 +69,18 @@
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
+
+ /* R7785RP has a slightly more sensible FPGA.. */
+#ifndef CONFIG_SH_R7785RP
.dev = {
.platform_data = heartbeat_bit_pos,
},
+#endif
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct platform_device *r7780rp_devices[] __initdata = {
- &m66596_usb_host_device,
&cf_ide_device,
&heartbeat_device,
};
@@ -110,6 +90,7 @@
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
+device_initcall(r7780rp_devices_setup);
/*
* Platform specific clocks
@@ -140,22 +121,22 @@
static void r7780rp_power_off(void)
{
-#ifdef CONFIG_SH_R7780MP
- ctrl_outw(0x0001, PA_POFF);
-#endif
+ if (mach_is_r7780mp() || mach_is_r7785rp())
+ ctrl_outw(0x0001, PA_POFF);
}
/*
* Initialize the board
*/
-static void __init r7780rp_setup(char **cmdline_p)
+static void __init highlander_setup(char **cmdline_p)
{
u16 ver = ctrl_inw(PA_VERREG);
int i;
- device_initcall(r7780rp_devices_setup);
-
- printk(KERN_INFO "Renesas Solutions Highlander R7780RP-1 support.\n");
+ printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
+ mach_is_r7780rp() ? "R7780RP-1" :
+ mach_is_r7780mp() ? "R7780MP" :
+ "R7785RP");
printk(KERN_INFO "Board version: %d (revision %d), "
"FPGA version: %d (revision %d)\n",
@@ -173,9 +154,10 @@
}
ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
-#ifndef CONFIG_SH_R7780MP
- ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
-#endif
+
+ if (mach_is_r7780rp())
+ ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
+
ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
pm_power_off = r7780rp_power_off;
@@ -184,10 +166,10 @@
/*
* The Machine Vector
*/
-struct sh_machine_vector mv_r7780rp __initmv = {
- .mv_name = "Highlander R7780RP-1",
- .mv_setup = r7780rp_setup,
+struct sh_machine_vector mv_highlander __initmv = {
+ .mv_name = "Highlander",
.mv_nr_irqs = 109,
- .mv_init_irq = init_r7780rp_IRQ,
+ .mv_setup = highlander_setup,
+ .mv_init_irq = highlander_init_irq,
};
-ALIAS_MV(r7780rp)
+ALIAS_MV(highlander)